We have found cases where pkt_has_store_s[01] is set incorrectly.
This leads to generating an unnecessary store that is left over
from a previous packet.
Add an attribute to determine if an instruction is a scalar store
The attribute is attached to the fSTORE macro (hex_common.py)
Update the logic in decode.c that sets pkt_has_store_s[01]
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220920080746.26791-4-tsimpson@quicinc.com>
The imported files from the architecture library have added some
instruction attributes. Some of these will be used in a subsequent
patch for determing the size of a store.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220920080746.26791-2-tsimpson@quicinc.com>
CHS-based disk utilities and operating systems may adjust the logical
geometry of a hard drive to cope with the expectations or limitations
of software using the ATA INITIALIZE_DEVICE_PARAMETERS command.
Prior to this patch, INITIALIZE_DEVICE_PARAMETERS was a nop that
always returned success, raising the possibility of data loss or
corruption if the CHS<->LBA translation redirected a write to the
wrong sector.
* hw/ide/core.c
ide_reset():
Reset the logical CHS geometry of the hard disk when the power-on
defaults feature is enabled.
cmd_specify():
a) New function implementing INITIALIZE_DEVICE_PARAMETERS.
b) Ignore calls for empty or ATAPI devices.
cmd_set_features():
Implement the power-on defaults enable and disable features.
struct ide_cmd_table:
Switch WIN_SPECIFY from cmd_nop() to cmd_specify().
ide_init_drive():
Set new fields 'drive_heads' and 'drive_sectors' based upon the
actual disk geometry.
* include/hw/ide/internal.h
struct IDEState:
a) Store the actual drive CHS values within the new fields
'drive_heads' and 'drive_sectors.'
b) Track whether a soft IDE reset should also reset the logical CHS
geometry of the hard disk within the new field 'reset_reverts'.
Signed-off-by: Lev Kujawski <lkujaw@member.fsf.org>
Message-Id: <20220707031140.158958-7-lkujaw@member.fsf.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Verify correction of EXECUTE DEVICE DIAGNOSTIC introduced in commit
72423831c3 (hw/ide/core: Clear LBA and drive bits for EXECUTE DEVICE
DIAGNOSTIC, 2022-05-28).
Signed-off-by: Lev Kujawski <lkujaw@member.fsf.org>
Message-Id: <20220707031140.158958-4-lkujaw@member.fsf.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Prior to this patch, cmd_exec_dev_diagnostic relied upon
ide_set_signature to clear the device register. While the
preservation of the drive bit by ide_set_signature is necessary for
the DEVICE RESET, IDENTIFY DEVICE, and READ SECTOR commands,
ATA/ATAPI-6 specifies that "DEV shall be cleared to zero" for EXECUTE
DEVICE DIAGNOSTIC.
This deviation was uncovered by the ATACT Device Testing Program
written by Hale Landis.
Signed-off-by: Lev Kujawski <lkujaw@member.fsf.org>
Message-Id: <20220707031140.158958-3-lkujaw@member.fsf.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Change 'tmp_path' into an array of two members to accommodate another
disk image of size TEST_IMAGE_SIZE. This facilitates testing ATA
protocol aspects peculiar to secondary devices on the same controller.
Signed-off-by: Lev Kujawski <lkujaw@member.fsf.org>
Message-Id: <20220707031140.158958-2-lkujaw@member.fsf.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Eliminate the remaining TODOs in hw/ide/piix.c by:
* Using pci_set_{size} functions to write the PIIX PCI configuration
space instead of manipulating it directly as an array; and
* Documenting the default register values by reference to the
controlling specification.
Signed-off-by: Lev Kujawski <lkujaw@member.fsf.org>
Message-Id: <20220707031140.158958-1-lkujaw@member.fsf.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
An iov length needs to be aligned to the logical block size, which may
be larger than the memory alignment.
Tested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20220929200523.3218710-3-kbusch@meta.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is only user of bdrv_qiov_is_aligned(), so move the alignment
function to there and make it static.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Message-Id: <20220929200523.3218710-2-kbusch@meta.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a new test to see what happens when you migrate a VM with a backing
chain that has json:{} backing file strings, which, when opened, will be
resolved to plain filenames.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220803144446.20723-4-hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Just like qcow2, qed invokes its open function in its
.bdrv_co_invalidate_cache() implementation. Therefore, just like done
for qcow2 in HEAD^, update auto_backing_file only if the backing file
string in the image header differs from the one we have read before.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220803144446.20723-3-hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qcow2_do_open() is used by qcow2_co_invalidate_cache(), i.e. may be run
on an image that has been opened before. When reading the backing file
string from the image header, compare it against the existing
bs->backing_file, and update bs->auto_backing_file only if they differ.
auto_backing_file should ideally contain the filename the backing BDS
will actually have after opening, i.e. a post-bdrv_refresh_filename()
version of what is in the image header. So for example, if the image
header reports the following backing file string:
json:{"driver": "qcow2", "file": {
"driver": "file", "filename": "/tmp/backing.qcow2"
}}
Then auto_backing_file should contain simply "/tmp/backing.qcow2".
Because bdrv_refresh_filename() only works on existing BDSs, though, the
way how we get this auto_backing_file value is to have the format driver
set it to whatever is in the image header, and when the backing BDS is
opened based on that, we update it with the filename the backing BDS
actually got.
However, qcow2's qcow2_co_invalidate_cache() implementation breaks this
because it just resets auto_backing_file to whatever is in the image
file without opening a BDS based on it, so we never get
auto_backing_file back to the "refreshed" version, and in the example
above, it would stay "json:{...}".
Then, bs->backing->bs->filename will differ from bs->auto_backing_file,
making bdrv_backing_overridden(bs) return true, which will lead
bdrv_refresh_filename(bs) to generate a json:{} filename for bs, even
though that may not have been necessary. This is reported in the issue
linked below.
Therefore, skip updating auto_backing_file if nothing has changed in the
image header since we last read it.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1117
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220803144446.20723-2-hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The gluster protocol driver used to parse URIs (filenames) but was
extended with a richer JSON syntax in commit 6c7189bb29
("block/gluster: add support for multiple gluster servers"). The gluster
drivers that have JSON parsing set .bdrv_needs_filename to false.
The gluster+unix and gluster+rdma drivers still to require a filename
even though the JSON parser is equipped to parse the same
volume/path/sockaddr details as the URI parser. Let's allow JSON parsing
for these drivers too.
Note that the gluster+rdma driver actually uses TCP because RDMA support
is not available, so the JSON server.type field must be "inet".
Drop .bdrv_needs_filename since both the filename and the JSON parsers
can handle gluster+unix and gluster+rdma. This change is in preparation
for eventually removing .bdrv_needs_filename across the entire codebase.
Cc: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220811164905.430834-1-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Return codes of the following functions are never used in the code:
* bdrv_wait_serialising_requests_locked
* bdrv_wait_serialising_requests
* bdrv_make_request_serialising
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Hanna Reitz <hreitz@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <fam@euphon.net>
CC: Ronnie Sahlberg <ronniesahlberg@gmail.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Peter Lieven <pl@kamp.de>
CC: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20220817083736.40981-3-den@openvz.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I believe that if the helper exists, it must be used always for reading
of the value. It breaks expectations in the other case.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Hanna Reitz <hreitz@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <fam@euphon.net>
CC: Ronnie Sahlberg <ronniesahlberg@gmail.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Peter Lieven <pl@kamp.de>
CC: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20220817083736.40981-2-den@openvz.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 5f76a7aac1 is looking harmless from
the first glance, but it has changed things a lot. 'libvirt' uses it to
detect that it should follow new initialization way and this changes
things considerably. With this procedure followed, blockdev_init() is
not called anymore and thus block_acct_setup() helper is not called.
This means in particular that defaults for block accounting statistics
are changed and account_invalid/account_failed are actually initialized
as false instead of true originally.
This commit changes things to match original world. There are the following
constraints:
* new default value in block_acct_init() is set to true
* block_acct_setup() inside blockdev_init() is called before
blkconf_apply_backend_options()
* thus newly created option in block device properties has precedence if
specified
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
CC: Peter Krempa <pkrempa@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220824095044.166009-3-den@openvz.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We would have one more place for block_acct_setup() calling, which should
not corrupt original value.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
CC: Peter Krempa <pkrempa@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
CC: John Snow <jsnow@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220824095044.166009-2-den@openvz.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
'?' for help is deprecated since commit c8057f951d "Support 'help' as
a synonym for '?' in command line options", v1.2.0. We neglected to
update output of qemu-img --help and the manual. Do that now.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220908130842.641410-1-armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit d1258dd0c8 ("qcow2: autoloading dirty bitmaps") added the
set_readonly_helper() GFunc handler, correctly casting the gpointer
user_data in both the g_slist_foreach() caller and the handler.
Few commits later (commit 1b6b0562db), the handler is reused in
qcow2_reopen_bitmaps_rw() but missing the gpointer cast, resulting
in the following error when using Homebrew GCC 12.2.0:
[2/658] Compiling C object libblock.fa.p/block_qcow2-bitmap.c.o
../../block/qcow2-bitmap.c: In function 'qcow2_reopen_bitmaps_rw':
../../block/qcow2-bitmap.c:1211:60: error: incompatible type for argument 3 of 'g_slist_foreach'
1211 | g_slist_foreach(ro_dirty_bitmaps, set_readonly_helper, false);
| ^~~~~
| |
| _Bool
In file included from /opt/homebrew/Cellar/glib/2.72.3_1/include/glib-2.0/glib/gmain.h:26,
from /opt/homebrew/Cellar/glib/2.72.3_1/include/glib-2.0/glib/giochannel.h:33,
from /opt/homebrew/Cellar/glib/2.72.3_1/include/glib-2.0/glib.h:54,
from /Users/philmd/source/qemu/include/glib-compat.h:32,
from /Users/philmd/source/qemu/include/qemu/osdep.h:144,
from ../../block/qcow2-bitmap.c:28:
/opt/homebrew/Cellar/glib/2.72.3_1/include/glib-2.0/glib/gslist.h:127:61: note: expected 'gpointer' {aka 'void *'} but argument is of type '_Bool'
127 | gpointer user_data);
| ~~~~~~~~~~~~~~~~~~^~~~~~~~~
At top level:
FAILED: libblock.fa.p/block_qcow2-bitmap.c.o
Fix by adding the missing gpointer cast.
Fixes: 1b6b0562db ("qcow2: support .bdrv_reopen_bitmaps_rw")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220919182755.51967-1-f4bug@amsat.org>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Free feature_table if it is failed in bdrv_pread.
Signed-off-by: lu zhipeng <luzhipeng@cestc.cn>
Message-Id: <20220921144515.1166-1-luzhipeng@cestc.cn>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These files come from an external project (the hexagon archlib), so they
deliberately do not follow QEMU's coding style. To avoid false positives
from checkpatch.pl, let's disable the checking for those.
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Message-Id: <e3b6a345a88807a1c4daa45f638b2a90af538fd5.1663681339.git.quic_mathbern@quicinc.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The structure is for device dvsec not port dvsec. Change type to fix
this issue.
Signed-off-by: Tong Zhang <t.zhang2@samsung.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20220915175853.2902-1-t.zhang2@samsung.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
$PROJECT/.cache/clangd/index is the intended location for project index
data when using clangd as the language server. Ignore this directory to
keep the git status clean.
Signed-off-by: Wang, Lei <lei4.wang@intel.com>
Message-Id: <20220907150010.2047037-1-lei4.wang@intel.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
GCC issues a false positive warning, resulting in build failure with -Werror:
In file included from /usr/include/glib-2.0/glib.h:114,
from src/include/glib-compat.h:32,
from src/include/qemu/osdep.h:144,
from ../src/hw/virtio/vhost-shadow-virtqueue.c:10:
In function ‘g_autoptr_cleanup_generic_gfree’,
inlined from ‘vhost_handle_guest_kick’ at ../src/hw/virtio/vhost-shadow-virtqueue.c:292:42:
/usr/include/glib-2.0/glib/glib-autocleanups.h:28:3: error: ‘elem’ may be used uninitialized [-Werror=maybe-uninitialized]
28 | g_free (*pp);
| ^~~~~~~~~~~~
../src/hw/virtio/vhost-shadow-virtqueue.c: In function ‘vhost_handle_guest_kick’:
../src/hw/virtio/vhost-shadow-virtqueue.c:292:42: note: ‘elem’ was declared here
292 | g_autofree VirtQueueElement *elem;
| ^~~~
cc1: all warnings being treated as errors
There is actually no problem since "elem" is initialized in both branches.
Silence the warning by initializig it with "NULL".
$ gcc --version
gcc (GCC) 12.2.0
Fixes: 9c2ab2f1ec ("vhost: stop transfer elem ownership in vhost_handle_guest_kick")
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220910151117.6665-1-shentey@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
SP_EL1 must be kept when EL3 is present but EL2 is not. Therefore mark
it with ARM_CP_EL3_NO_EL2_KEEP.
Cc: qemu-stable@nongnu.org
Fixes: 696ba37718 ("target/arm: Handle cpreg registration for missing EL")
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220927120058.670901-1-jerome.forissier@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The SMMUv3 node isn't expected to have clock properties
(unlike the SMMUv2). Fix the corresponding dt-validate warning:
smmuv3@9050000: 'clock-names', 'clocks' do not match any of the regexes: 'pinctrl-[0-9]+'
From schema: linux/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweaked commit message as suggested by Eric]
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20220927100347.176606-7-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The "msi-parent" property can be used on the PCI node when MSIs do not
contain sideband data (device IDs) [1]. In QEMU, MSI transactions
contain the requester ID, so the PCI node should use the "msi-map"
property instead of "msi-parent". In our case the property describes an
identity map between requester ID and sideband data.
This fixes a warning when passing the DTB generated by QEMU to dtc,
following a recent change to the GICv3 node:
Warning (msi_parent_property): /pcie@10000000:msi-parent: property size (4) too small for cell size 1
[1] linux/Documentation/devicetree/bindings/pci/pci-msi.txt
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20220927100347.176606-4-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The GICv3 bindings requires a #msi-cells property for the ITS node. Fix
the corresponding dt-validate warning:
interrupt-controller@8000000: msi-controller@8080000: '#msi-cells' is a required property
From schema: linux/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20220927100347.176606-3-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The devicetree specification requires a 'model' property in the root
node. Fix the corresponding dt-validate warning:
/: 'model' is a required property
From schema: dtschema/schemas/root-node.yaml
Use the same name for model as for compatible. The specification
recommends that 'compatible' follows the format 'manufacturer,model' and
'model' follows the format 'manufacturer,model-number'. Since our
'compatible' doesn't observe this, 'model' doesn't really need to
either.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20220927100347.176606-2-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Connect ZynqMP's USB controllers.
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220920081517.25401-1-frasse.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
cpu64.c has ended up in a slightly odd order -- it starts with the
initfns for most of the models-real-hardware CPUs; after that comes a
bunch of support code for SVE, SME, pauth and LPA2 properties. Then
come the initfns for the 'host' and 'max' CPU types, and then after
that one more models-real-hardware CPU initfn, for a64fx. (This
ordering is partly historical and partly required because a64fx needs
the SVE properties.)
Reorder the file into:
* CPU property support functions
* initfns for real hardware CPUs
* initfns for host and max
* class boilerplate
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Our SDCR_VALID_MASK doesn't include all of the bits which are defined
by the current architecture. In particular in commit 0b42f4fab9 we
forgot to add SCCD, which meant that an AArch32 guest couldn't
actually use the SCCD bit to disable counting in Secure state.
Add all the currently defined bits; we don't implement all of them,
but this makes them be reads-as-written, which is architecturally
valid and matches how we currently handle most of the others in the
mask.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220923123412.1214041-4-peter.maydell@linaro.org
In commit 01765386a8 we fixed a bug where we weren't correctly
bracketing changes to some registers with pmu_op_start() and
pmu_op_finish() calls for changes which affect whether the PMU
counters might be enabled. However, we missed the case of writes to
the AArch64 MDCR_EL3 register, because (unlike its AArch32
counterpart) they are currently done directly to the CPU state struct
without going through the sdcr_write() function.
Give MDCR_EL3 a writefn which handles the PMU start/finish calls.
The SDCR writefn then simplfies to "call the MDCR_EL3 writefn after
masking off the bits which don't exist in the AArch32 register".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220923123412.1214041-3-peter.maydell@linaro.org
In commit 01765386a8 we made some system register write functions
call pmu_op_start()/pmu_op_finish(). This means that they now touch
timers, so for icount to work these registers must have the ARM_CP_IO
flag set.
This fixes a bug where when icount is enabled a guest that touches
MDCR_EL3, MDCR_EL2, PMCNTENSET_EL0 or PMCNTENCLR_EL0 would cause
QEMU to print an error message and exit, for example:
[ 2.495971] TCP: Hash tables configured (established 1024 bind 1024)
[ 2.496213] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 2.496386] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 2.496917] NET: Registered protocol family 1
qemu-system-aarch64: Bad icount read
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220923123412.1214041-2-peter.maydell@linaro.org
While the source directory is always included in the include path,
the corresponding directory in the build tree is not. Therefore,
custom_targets (e.g. ui/dbus-display1.h) must be referred to using
the full path.
This avoids a build failure when ui/dbus-chardev.c is not built as
a module:
In file included from ../ui/dbus-chardev.c:32:
../ui/dbus.h:34:10: fatal error: dbus-display1.h: No such file or directory
34 | #include "dbus-display1.h"
| ^~~~~~~~~~~~~~~~~
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As the close-on-exec flags is not set on the file descriptors returned
by socketpair() at default, the fds will survive across exec' function.
In the case that exec' function get invoked, such as the live-update feature
which is been developing, it will cause fd leaks.
To address this problem, we should call qemu_socketpair() to create an pair of
connected sockets with the close-on-exec flag set.
Signed-off-by: Guoyi Tu <tugy@chinatelecom.cn>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <7002b12a5fb0a30cd878e14e07da61c36da72913.1661240709.git.tugy@chinatelecom.cn>
qemu_socketpair() will create a pair of connected sockets
with FD_CLOEXEC set
Signed-off-by: Guoyi Tu <tugy@chinatelecom.cn>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <17fa1eff729eeabd9a001f4639abccb127ceec81.1661240709.git.tugy@chinatelecom.cn>
If finalize chardev-msmouse or chardev-wctable is called immediately after
init it cases QEMU to crash with segfault. This happens because of
QTAILQ_REMOVE in qemu_input_handler_unregister tries to dereference
NULL pointer.
For instance, this error can be reproduced via `qom-list-properties`
command.
Signed-off-by: Maksim Davydov <davydov-max@yandex-team.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20220825165247.33704-1-davydov-max@yandex-team.ru>
Unaligned i/o access on serial UART works on real PCs.
This is used for example by FreeDOS CTMouse driver. Without this it
can't reset and detect serial mice.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/77
Signed-off-by: Arwed Meyer <arwed.meyer@gmx.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220911181840.8933-6-arwed.meyer@gmx.de>
Make msmouse send serial pnp data.
Enables you to see nice qemu device name in Win9x.
Signed-off-by: Arwed Meyer <arwed.meyer@gmx.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220911181840.8933-5-arwed.meyer@gmx.de>
Make use of fifo8 functions instead of implementing own fifo code.
This makes the code more readable and reduces risk of bugs.
Signed-off-by: Arwed Meyer <arwed.meyer@gmx.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220911181840.8933-4-arwed.meyer@gmx.de>
Make source buffers const for char be write functions.
This allows using buffers returned by fifo as buf parameter and source buffer
should not be changed by write functions anyway.
Signed-off-by: Arwed Meyer <arwed.meyer@gmx.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220911181840.8933-3-arwed.meyer@gmx.de>
Detect mouse reset via RTS or DTR line:
Don't send or process anything while in reset.
When coming out of reset, send ID sequence first thing.
This allows msmouse to be detected by common mouse drivers.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/77
Signed-off-by: Arwed Meyer <arwed.meyer@gmx.de>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220911181840.8933-2-arwed.meyer@gmx.de>
This was deprecated in 6.2 and is ready to go. It removes quite a bit
of code that handled the registration of watchdog models.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
