This validates that we correctly handle migration success and failure
scenarios when using TLS with pre shared keys.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220426160048.812266-4-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Since commit a2ce7dbd91 ("meson: convert tests/qtest to meson"),
libqtest.h is under libqos/ directory, while libqtest.c is still in
qtest/. Move back to its original location to avoid mixing with libqos/.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
The migration precopy testing helper function always expects the
migration to run to a completion state. There will be test scenarios
for TLS where expect either the client or server to fail the migration.
This expands the helper to cope with these scenarios.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-12-berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The combination of the start and finish hooks allow the FD passing
code to use the precopy helper
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-11-berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
There are alot of different scenarios to test with migration due to the
wide number of parameters and capabilities available. To enable sharing
of the basic precopy test scenario, we need to be able to set arbitrary
parameters and capabilities before the migration is initiated, but don't
want to have all this logic in the common helper function. Solve this
by defining two hooks that can be provided by the test case, one before
migration starts and one after migration finishes.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-10-berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The test cases differ only in the URI they provide to the migration
commands, and the ability to set the dirty_ring mode. This code is
trivially merged into a common helper.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-9-berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
There's no compelling reason why the MigrateStart struct needs to be
heap allocated. Using stack allocation and static initializers is
simpler.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220310171821.3724080-8-berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
test_migrate_start() will release the MigrateStart structure that passed
in, however that's not super clear to the caller because after the call
returned the pointer can still be referenced by the callers. It can easily
be a source of use-after-free.
Let's pass in a double pointer of that, then we can safely clear the
pointer for the caller after the struct is released.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220301083925.33483-26-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Fixup apply since I didn't take 24/25
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210902113551.461632-15-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Even if <linux/kvm.h> seems to exist for all archs on linux, however including
it with __linux__ defined seems to be not working yet as it'll try to include
asm/kvm.h and that can be missing for archs that do not support kvm.
To fix this (instead of any attempt to fix linux headers..), we can mark the
header to be x86_64 only, because it's so far only service for adding the kvm
dirty ring test.
Fixes: 1f546b709d ("tests: migration-test: Add dirty ring test")
Reported-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210728214128.206198-1-peterx@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
OpenBSD doesn't like :0 as an address, switch to using 127.0.0.1
in baddest; it's really testing the :0 port number that isn't allowed
on anything.
(The test doesn't currently run anyway because of the userfault
problem that Peter noticed, but this gets us closer to being able to
reenable it)
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210719185217.122105-1-dgilbert@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add dirty ring test if kernel supports it. Add the dirty ring parameter on
source should be mostly enough, but let's change the dest too to make them
match always.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210615175523.439830-3-peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Coverity notices that several places in the migration-test code fail
to free memory in error-exit paths. This is pretty unimportant in
test case code, but we can avoid having to manually free the memory
entirely by using g_autofree.
The places where Coverity spotted a leak were relating to early exits
not freeing 'uri' in test_precopy_unix(), do_test_validate_uuid(),
migrate_postcopy_prepare() and test_migrate_auto_converge(). This
patch converts all the string-allocation in the test code to
g_autofree for consistency.
Fixes: Coverity CID 1432313, 1432315, 1432352, 1432364
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210506185819.9010-1-peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Accidental use of "true" as a boolean; spotted by coverity
and Peter.
Fixes: b99784ef6c
Fixes: d795f47466
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Coverity (CID 1432373, 1432292, 1432288)
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210504100545.112213-1-dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The generic 'migrate_set_parameters' command handle all types of param.
Only the QMP commands were documented in the deprecations page, but the
rationale for deprecating applies equally to HMP, and the replacements
exist. Furthermore the HMP commands are just shims to the QMP commands,
so removing the latter breaks the former unless they get re-implemented.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The errors are very useful when debugging qtest failures, especially when
QTEST_LOG=1 is set. Let's allow override MigrateStart.hide_stderr when
QTEST_LOG=1 is specified, because that means the user wants to be verbose.
Not very nice to introduce the first QTEST_LOG env access in migration-test.c,
however it should be handy. Without this patch, I was hacking error_report()
when debugging such errors. Let's make things easier.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201021212721.440373-7-peterx@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
In travis, with gcov and gprof we're seeing timeouts; hopefully fix
this by increasing the test timeouts a bit, but for xbzrle ensure it
really does get a couple of cycles through to test the cache.
I think the problem in travis is we have about 2 host CPU threads,
in the test we have at least 3:
a) The vCPU thread (100% flat out)
b) The source migration thread
c) The destination migration thread
if (b) & (c) are slow for any reason - gcov+gperf or a slow host -
then they're sharing one host CPU thread so limit the migration
bandwidth.
Tested on my laptop with:
taskset -c 0,1 ./tests/qtest/migration-test -p /x86_64/migration
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20201008160330.130431-1-dgilbert@redhat.com>
[thuth: Move the #define to the right location]
Signed-off-by: Thomas Huth <thuth@redhat.com>
This reverts commit 6d1da867e6 ("tests/migration: Reduce autoconverge initial bandwidth")
since that change makes unit tests much slower for all developers, while it's not
a robust way to fix migration tests. Migration tests need to find
a more robust way to discover a reasonable bandwidth without slowing
things down for everyone.
Fixes: 6d1da867e6 ("tests/migration: Reduce autoconverge initial bandwidth")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
migrate_get_socket_address() neglects to check
visit_type_SocketAddressList() failure. This smells like a leak, but
it actually will crash dereferencing @addrs. Pass &error_abort to
remove the code smell.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200505101908.6207-5-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
When using max-bandwidth=~100Mb/s, this test fails on Travis-CI
s390x when configured with --disable-tcg:
$ make check-qtest
TEST check-qtest-s390x: tests/qtest/boot-serial-test
qemu-system-s390x: -accel tcg: invalid accelerator tcg
qemu-system-s390x: falling back to KVM
TEST check-qtest-s390x: tests/qtest/pxe-test
TEST check-qtest-s390x: tests/qtest/test-netfilter
TEST check-qtest-s390x: tests/qtest/test-filter-mirror
TEST check-qtest-s390x: tests/qtest/test-filter-redirector
TEST check-qtest-s390x: tests/qtest/drive_del-test
TEST check-qtest-s390x: tests/qtest/device-plug-test
TEST check-qtest-s390x: tests/qtest/virtio-ccw-test
TEST check-qtest-s390x: tests/qtest/cpu-plug-test
TEST check-qtest-s390x: tests/qtest/migration-test
**
ERROR:tests/qtest/migration-test.c:1229:test_migrate_auto_converge: 'got_stop' should be FALSE
ERROR - Bail out! ERROR:tests/qtest/migration-test.c:1229:test_migrate_auto_converge: 'got_stop' should be FALSE
make: *** [tests/Makefile.include:633: check-qtest-s390x] Error 1
Per David Gilbert, "it could just be the writing is slow on s390
and the migration thread fast; in which case the autocomplete
wouldn't be needed. Perhaps we just need to reduce the bandwidth
limit."
Tuning the threshold by reducing the initial bandwidth makes the
autoconverge test pass.
Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200323184015.11565-1-philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This will store the compression method to use. We start with none.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
Rename multifd-method to multifd-compression
spotted by asan, 'check-qtest-aarch64' runs fail if sanitizers is enabled.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
There's an assert in autoconverge that checks that we quit the
iteration when we go below the expected threshold. Philippe
saw a case where this assert fired with the measured value
slightly over the threshold. (about 3k out of a few million).
I can think of two reasons:
a) Rounding errors
b) That after we make the decision to quit iteration we do one
more sync and that sees a few more dirty pages.
So add 1% slack to the assertion, that should cover a and
most cases of b, probably all we'll see for the test.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Test that this sequence works:
- launch source
- launch target
- start migration
- cancel migration
- relaunch target
- do migration again
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We set multifd-channels.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Wei Yang <richardw.yang@linux.intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Commit e51e711b1b has moved the initialization of start_address and
end_address after the definition of the command line argument,
where the nvramrc is initialized, and thus the loop is between 0 and 0
rather than 1 MiB and 100 MiB.
It doesn't affect the result of the test if all the tests are run in
sequence because the two first tests don't run the loop, so the
values are correctly initialized when we actually need them.
But it hangs when we ask to run only one test, for instance:
QTEST_QEMU_BINARY=ppc64-softmmu/qemu-system-ppc64 \
tests/migration-test -m=quick -p /ppc64/migration/validate_uuid_error
Fixes: e51e711b1b ("tests/migration: Add migration-test header file")
Cc: wei@redhat.com
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200107163437.52139-1-lvivier@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The tests directory itself is pretty overcrowded, and it's hard to
see which test belongs to which test subsystem (unit, qtest, ...).
Let's move the qtests to a separate folder for more clarity.
Message-Id: <20191218103059.11729-6-thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
