debian-ports is listed as a partial image, so we cannot run tests against it.
Since it isn't used by any other testable image, remove it for now as it
is prone to bitrot.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20190923181140.7235-5-jsnow@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
There isn't a debian.dockerfile anymore,
so perform some ghost-busting.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20190923181140.7235-4-jsnow@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Philippe Mathieu-Daudé <philmd@redhat.com>
debian8 partial base is also not consumed by any image, so remove it.
For QEMU's development cycle, we only support debian9 (stretch) and
debian10 (buster).
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190923181140.7235-3-jsnow@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We don't have a debian8-mxe dockerfile anymore.
Fixes: 67bd36beda
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190923181140.7235-2-jsnow@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This adds two new tests that re-use the memory test to check basic
record replay functionality is still working. We have to define our
own runners rather than using the default pattern as we want to change
the test name but re-use the memory binary.
We declare the test binaries as PHONY as they don't really exist.
[AJB: A better test would output some sort of timer value or other
otherwise variable value so we could compare the record and replay
outputs and ensure they match]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Pavel Dovgalyuk <dovgaluk@ispras.ru>
This is broadly similar to the existing fcvt test for ARM but using
the generic float testing framework. We should be able to pare down
the ARM fcvt test case to purely half-precision with or without the
Alt HP provision.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This is a generic floating point multiply and accumulate test for
single precision floating point values. I've split of the common float
functions into a helper library so additional tests can use the same
common code.
As I don't have references for all architectures I've allowed some
flexibility for tests to pass without reference files. They can be
added as we get collect them.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now we have fixed the signal delivary bug we can remove this horrible
hack from the system.
Cc: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
These were missed in the recent de-tangling so have been updated to be
more actuate. I've also built up ARM_TESTS in a manner similar to
AARCH64_TESTS for better consistency.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Oops; there's no argv here.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20190913193821.17756-1-jsnow@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
There was in the clean-up code caused by attempting to inspect images
which finished before we got there. Clean up the clean up code by:
- only track the one instance at a time
- use --filter for docker ps instead of doing it by hand
- just call docker rm -f to be done with it
- use uuid.uuid4() for a random uid
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
When it was based on debian8 which uses python-minimal, it needed this.
It no longer does.
Goodbye, python2.7.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20190918222546.11696-1-jsnow@redhat.com>
[AJB: fixed up commit message]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Finger trouble in a previous clean-up inadvertently set
DEBIAN_PARTIAL_IMAGES instead of DOCKER_PARTIAL_IMAGES. Also fix the
typo to debian-9-mxe.
Fixes: 44d5a8bf5d
Signed-off-by: John Snow <jsnow@redhat.com>
[AJB: merged fix from Message-Id: <20190917185537.25417-1-jsnow@redhat.com>]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Fedora23 is but a distant twinkle. The sanitizer works again, and even
if not, we have --enable-sanitizers now.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20190912014442.5757-1-jsnow@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
me: test fixes from (should stop hangs in postcopy tests).
me: An RDMA cleanup hang fix
Wei: Tidy ups around postcopy
Marc-Andre: mem leak fix
-----BEGIN PGP SIGNATURE-----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=61eA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20190925a' into staging
Migration pull 2019-09-25
me: test fixes from (should stop hangs in postcopy tests).
me: An RDMA cleanup hang fix
Wei: Tidy ups around postcopy
Marc-Andre: mem leak fix
# gpg: Signature made Wed 25 Sep 2019 15:59:41 BST
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20190925a:
migration/postcopy: Recognise the recovery states as 'in_postcopy'
tests/migration/postcopy: trim migration bandwidth
tests/migration: Fail on unexpected migration states
migration/rdma.c: Swap synchronize_rcu for call_rcu
migration/rdma: Don't moan about disconnects at the end
migration: remove sent parameter in get_queued_page_not_dirty
migration/postcopy: unsentmap is not necessary for postcopy
migration/postcopy: not necessary to do discard when canonicalizing bitmap
migration: fix vmdesc leak on vmstate_save() error
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Improved error message for plaintext client of encrypted server
- Fix various assertions when -object iothread is in use
- Silence a Coverity error for use-after-free on error path
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAl2LbTgACgkQp6FrSiUn
Q2rw/gf8CiEby+/V5AExRf/CQ9TOqFCcIYwbsMpTbGTUJIrF0N7FH/FT6g6wZUMq
JYdHDk77ew0ZoQCLkefl8Bj3ddIcfzIkcL4/AYTZ3KUyPTzmwrejckcQ08qlj+dg
HvnnxmNmtPTi001r4fVLl+OfFVXkw/ACnjoy/tB+UP7ZxV4ADi5UAVyBvnwGFVkP
n4mf7o3tvM05eVhwkbVUSsEDvN2VCMxrNM2Qm6u5njoPuGi06fLpN/5oVTiipvcA
xgLSKNzOVyK3v98eGCxUBsYOtTqLphuhSSTpbwEy1uxRRIoBUpFxfazWXpX0pWl9
m+ibBD5tX6e5sFISMRNu9Q4LrFcutw==
=GqDl
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2019-09-24-v2' into staging
nbd patches for 2019-09-24
- Improved error message for plaintext client of encrypted server
- Fix various assertions when -object iothread is in use
- Silence a Coverity error for use-after-free on error path
# gpg: Signature made Wed 25 Sep 2019 14:35:52 BST
# gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2019-09-24-v2:
util/qemu-sockets: fix keep_alive handling in inet_connect_saddr
tests: Use iothreads during iotest 223
nbd: Grab aio context lock in more places
nbd/server: attach client channel to the export's AioContext
nbd/client: Add hint when TLS is missing
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On slow hosts with tcg we were sometimes finding that the migration
would complete during precopy and never get into the postcopy test.
Trim back the bandwidth a bit to make that much less likely.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190923131022.15498-3-dgilbert@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We've got various places where we wait for a migration to enter
a given state; but if we enter an unexpected state we tend to fail
in odd ways; add a mechanism for explicitly testing for any state
which we shouldn't be in.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190923131022.15498-2-dgilbert@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Doing so catches the bugs we just fixed with NBD not properly using
correct contexts.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190920220729.31801-1-eblake@redhat.com>
I received an off-list report of failure to connect to an NBD server
expecting an x509 certificate, when the client was attempting something
similar to this command line:
$ ./x86_64-softmmu/qemu-system-x86_64 -name 'blah' -machine q35 -nodefaults \
-object tls-creds-x509,id=tls0,endpoint=client,dir=$path_to_certs \
-device virtio-scsi-pci,id=virtio_scsi_pci0,bus=pcie.0,addr=0x6 \
-drive id=drive_image1,if=none,snapshot=off,aio=threads,cache=none,format=raw,file=nbd:localhost:9000,werror=stop,rerror=stop,tls-creds=tls0 \
-device scsi-hd,id=image1,drive=drive_image1,bootindex=0
qemu-system-x86_64: -drive id=drive_image1,if=none,snapshot=off,aio=threads,cache=none,format=raw,file=nbd:localhost:9000,werror=stop,rerror=stop,tls-creds=tls0: TLS negotiation required before option 7 (go)
server reported: Option 0x7 not permitted before TLS
The problem? As specified, -drive is trying to pass tls-creds to the
raw format driver instead of the nbd protocol driver, but before we
get to the point where we can detect that raw doesn't know what to do
with tls-creds, the nbd driver has already failed because the server
complained. The fix to the broken command line? Pass
'...,file.tls-creds=tls0' to ensure the tls-creds option is handed to
nbd, not raw. But since the error message was rather cryptic, I'm
trying to improve the error message.
With this patch, the error message adds a line:
qemu-system-x86_64: -drive id=drive_image1,if=none,snapshot=off,aio=threads,cache=none,format=raw,file=nbd:localhost:9000,werror=stop,rerror=stop,tls-creds=tls0: TLS negotiation required before option 7 (go)
Did you forget a valid tls-creds?
server reported: Option 0x7 not permitted before TLS
And with luck, someone grepping for that error message will find this
commit message and figure out their command line mistake. Sadly, the
only mention of file.tls-creds in our docs relates to an --image-opts
use of PSK encryption with qemu-img as the client, rather than x509
certificate encryption with qemu-kvm as the client.
CC: Tingting Mao <timao@redhat.com>
CC: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190907172055.26870-1-eblake@redhat.com>
[eblake: squash in iotest 233 fix]
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 87adbbffd4..3e270dcacc "qapi: Add 'if' to (implicit
struct|union|alternate) members" (v4.0.0) neglected test coverage, and
promptly failed to check the conditions. Review fail.
Recent commit "tests/qapi-schema: Demonstrate insufficient 'if'
checking" added test coverage, demonstrating the bug. Fix it by add
the missing check_if().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190914153506.2151-13-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
"'if': 'COND'" generates "#if COND". We reject empty COND because it
won't compile. Blank COND won't compile any better, so reject that,
too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190914153506.2151-12-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
check_union() checks the discriminator exists in base and makes sense.
Two error messages mention the base. These are broken for anonymous
bases, as demonstrated by tests flat-union-invalid-discriminator and
flat-union-invalid-if-discriminator.err. The third one doesn't
bother.
First broken when commit ac4338f8eb "qapi: Allow anonymous base for
flat union" (v2.6.0) neglected to adjust the "not a member of base"
error message. Commit ccadd6bcba "qapi: Add 'if' to implicit struct
members" (v4.0.0) then cloned the flawed error message.
Dumb them down not to mention the base.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190914153506.2151-11-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We represent the parse tree as OrderedDict. We fetch optional dict
members with .get(). So far, so good.
We represent null literals as None. .get() returns None both for
"absent" and for "present, value is the null literal". Uh-oh.
Test features-if-invalid exposes this bug: "'if': null" is
misinterpreted as absent "if".
We added null to the schema language to "allow [...] an explicit
default value" (commit e53188ada5 "qapi: Allow true, false and null in
schema json", v2.4.0). Hasn't happened; null is still unused except
as generic invalid value in tests/.
To fix, we'd have to replace .get() by something more careful, or
represent null differently. Feasible, but we got more and bigger fish
to fry right now. Remove the null literal from the schema language.
Replace null in tests by another invalid value.
Test features-if-invalid now behaves as it should.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190914153506.2151-10-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Show text up to next structural character, whitespace, or quote
character instead of just the first character.
Forgotten quotes now get reported like "Stray 'command'" instead of
"Stray 'c'".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190914153506.2151-9-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Consistently enclose error messages in double quotes. Use single
quotes within, except for one case of "'".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190914153506.2151-8-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The error message for forgotten quotes around a name shows just the
name's first character, which isn't as nice as it could be. Same for
attempting to use a number.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190914153506.2151-7-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Cover invalid 'if' in struct members, features, union and alternate
branches. Four out of four are broken. Mark FIXME.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190914153506.2151-6-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Comment typo fixed]
When the union definition's base is an object, some error messages
show it as an OrderedDict. Oops. Mark FIXME.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190914153506.2151-5-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Test flat-union-optional-discriminator declares its union tag as
'*switch': 'Enum', and points to it with 'discriminator': '*switch'.
This gets rejected as "discriminator of flat union 'MyUnion' uses
invalid name '*switch'". Correct; member 'discriminator' doesn't
accept a '*' prefix.
However, this merely tests name validity checking, which we already
cover elsewhere. More interesting is testing the valid name 'switch'.
This reports "discriminator 'switch' is not a member of base struct
'Base'", which is misleading.
Copy the existing 'discriminator': '*switch' test to
flat-union-discriminator-bad-name, and rewrite its comment. Change
flat-union-optional-discriminator to test 'discriminator': 'switch',
and mark it FIXME.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190914153506.2151-4-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tests duplicate-key and double-data test the same thing. The former
predates the latter, and it has a better name. Delete the latter, and
tweak the former's comment.
Tests include-format-err and include-extra-junk test the same thing.
The former predates the latter, but the latter has a better name and a
comment. Delete the former.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190914153506.2151-3-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The previous commit made qapi-code-gen.txt define "(top-level)
expression" as either "directive" or "definition". The code still
uses "expression" when it really means "definition". Tidy up.
The previous commit made qapi-code-gen.txt use "object" rather than
"dictionary". The code still uses "dictionary". Tidy up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-17-armbru@redhat.com>
For consistency with docs/devel/qapi-code-gen.txt.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-12-armbru@redhat.com>
Absent flat union branches default to the empty struct (since commit
800877bb16 "qapi: allow empty branches in flat unions"). But an
attempt to omit all of them is rejected with "Union 'FOO' has no
branches". Harmless oddity, but it's easy to avoid, so do that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-11-armbru@redhat.com>
[Commit message typo fixed]
A union or alternate without branches makes no sense and doesn't work:
it can't be instantiated. A union or alternate with just one branch
works, but is degenerate. We accept the former, but reject the
latter. Weird. docs/devel/qapi-code-gen.txt doesn't mention the
difference. It claims an alternate definition is "is similar to a
simple union type".
Permit degenerate alternates to make them consistent with unions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-10-armbru@redhat.com>
We reject empty types with 'boxed': true. We don't really need that
to work, but making it work is actually simpler than rejecting it, so
do that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-9-armbru@redhat.com>
Since the previous commit restricted strings to printable ASCII,
\uXXXX's only use is obfuscation. Drop it.
This leaves \\, \/, \', and \". Since QAPI schema strings are all
names, and names are restricted to ASCII letters, digits, hyphen, and
underscore, none of them is useful.
The latter three have no test coverage. Drop them.
Keep \\ to avoid (more) gratuitous incompatibility with JSON.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-8-armbru@redhat.com>
RFC 8259 on string contents:
All Unicode characters may be placed within the quotation marks,
except for the characters that MUST be escaped: quotation mark,
reverse solidus, and the control characters (U+0000 through
U+001F).
The QAPI schema parser accepts both less and more than JSON: it
accepts only ASCII with \u (less), and accepts control characters
other than LF (new line) unescaped. How it treats unescaped non-ASCII
input differs between Python 2 and Python 3.
Make it accept strictly less: require printable ASCII. Drop support
for \b, \f, \n, \r, \t.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-7-armbru@redhat.com>
Invalid name 'not\\possible' is reported as 'not\possible'. Control
characters (quoted or not) are even more confusing. Mark FIXME.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-6-armbru@redhat.com>
Commands and events can define their argument type inline (default) or
by referring to another type ('boxed': true, since commit c818408e44
"qapi: Implement boxed types for commands/events", v2.7.0). The
unboxed inline definition is an (anonymous) struct type. The boxed
type may be a struct, union, or alternate type.
The latter is problematic: docs/interop/qemu-spec.txt requires the
value of the 'data' key to be a json-object, but any non-degenerate
alternate type has at least one branch that isn't.
Fortunately, we haven't made use of alternates in this context outside
tests/. Drop support for them.
QAPISchemaAlternateType.is_empty() is now unused. Drop it, too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-4-armbru@redhat.com>
* Relaxed error code pattern on machine_m68k_nextcube.py
* Better naming and separation of tests in x86_cpu_model_versions.py
* New checks on guest side on linux_ssh_mips_malta.py
* Use of avocado.utils.ssh, and thus "/usr/bin/ssh" for SSH
interaction
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEeruW64tGuU1eD+m7ZX6NM6XyCfMFAl2IyrkACgkQZX6NM6Xy
CfMFOBAAy6rYpXGBtLtbrS1g3FGA70PiSCQMi/ydLhTzO/5DEZ050tlVLXKyUWrS
8VUSV0qbw+QeQ+yJPcLbfxFQ1MrRfDZlo0TvQiRRceUocex1FSsMR5RoER5O8dS4
DUUBFUPLhtLiCjorQWKZFPXePqvUPDBri9FNcCisdg4Mkkqhcuw/j6iMrSzW2B5G
NxFi0hXoYSoAMebTA2UIrZ+TtZw6BFZTpENkLBxN9+ARwqc8Rhg18YHh91mxISH9
vgyXAK6CJ4MeNsQ6Dqsx/LCloVra4vCfQ+3oz7KtihYOzbtcP2jssMfXON8Ui0Vf
WRdkMVCTzf5HuwILm69VKOyRnEtIlVGq36gnf61wtn0LokBn5m+DUuKVFMOsqpN3
JZ1Wrur+Dd6xLTvJnwhE1kwGqEWHbkH68XIR7ZRckp0zwul3L/xspVDxN0p8nYfU
J06FV4sQIzAI0rTc7fuYMkhrjUzWKfYYhLAEwCKIaEe9LHTcdtD7w/dFZMjcbZVy
AdVxwFDCfHucEb9eEDawRe5rY5SJiRpytUpyv8NH7gBXhhL7CgaYpxtcbe/a7eck
3MAd3bMhv4cRxnlrz4gOBtKWyQNOG6VjZFMQurXTynJ8PAsL7vkTwdWyY1L4C8zM
2ris83xs55PZdpN9BN8KyPZqhO4sB9YrsFwSluqatLhCFd64yG0=
=Xv0l
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cleber/tags/python-next-pull-request' into staging
Improvements include:
* Relaxed error code pattern on machine_m68k_nextcube.py
* Better naming and separation of tests in x86_cpu_model_versions.py
* New checks on guest side on linux_ssh_mips_malta.py
* Use of avocado.utils.ssh, and thus "/usr/bin/ssh" for SSH
interaction
# gpg: Signature made Mon 23 Sep 2019 14:38:01 BST
# gpg: using RSA key 7ABB96EB8B46B94D5E0FE9BB657E8D33A5F209F3
# gpg: Good signature from "Cleber Rosa <crosa@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 7ABB 96EB 8B46 B94D 5E0F E9BB 657E 8D33 A5F2 09F3
* remotes/cleber/tags/python-next-pull-request:
Acceptance tests: use avocado.utils.ssh for SSH interaction
tests/acceptance: Add new test cases in linux_ssh_mips_malta.py
tests/acceptance: Refactor and improve reporting in linux_ssh_mips_malta.py
Acceptance test x86_cpu_model_versions: split into smaller tests
Acceptance test x86_cpu_model_versions: fix mismatches between test and messages
Acceptance test x86_cpu_model_versions: shutdown VMs
Acceptance test machine_m68k_nextcube.py: relax the error code pattern
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some bug fixes for the watchdog and hopeful the BT tests.
Change the IPMI UUID handling to give the user the ability to set it or
not have it.
Add a PCI interface.
Add an SMBus interfaces.
-corey
-----BEGIN PGP SIGNATURE-----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=lCyp
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cminyard/tags/ipmi-for-release-2019-09-20' into staging
ipmi: Some bug fixes and new interfaces
Some bug fixes for the watchdog and hopeful the BT tests.
Change the IPMI UUID handling to give the user the ability to set it or
not have it.
Add a PCI interface.
Add an SMBus interfaces.
-corey
# gpg: Signature made Fri 20 Sep 2019 20:11:21 BST
# gpg: using RSA key FD0D5CE67CE0F59A6688268661F38C90919BFF81
# gpg: Good signature from "Corey Minyard <cminyard@mvista.com>" [unknown]
# gpg: aka "Corey Minyard <minyard@acm.org>" [unknown]
# gpg: aka "Corey Minyard <corey@minyard.net>" [unknown]
# gpg: aka "Corey Minyard <minyard@mvista.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FD0D 5CE6 7CE0 F59A 6688 2686 61F3 8C90 919B FF81
* remotes/cminyard/tags/ipmi-for-release-2019-09-20:
pc: Add an SMB0 ACPI device to q35
ipmi: Fix SSIF ACPI handling to use the right CRS
acpi: Add i2c serial bus CRS handling
ipmi: Add an SMBus IPMI interface
ipmi: Add PCI IPMI interfaces
smbios:ipmi: Ignore IPMI devices with no fwinfo function
ipmi: Allow a size value to be passed for I/O space
ipmi: Split out BT-specific code from ISA BT code
ipmi: Split out KCS-specific code from ISA KCS code
ipmi: Add a UUID device property
qdev: Add a no default uuid property
tests:ipmi: Fix IPMI BT tests
ipmi: Generate an interrupt on watchdog pretimeout expiry
ipmi: Fix the get watchdog command
ipmi: Fix watchdog NMI handling
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let's add a test that especially verifies that no data will be touched
in case we cross page boundaries and one page access triggers a fault.
Before the fault-safe handling fixes, the test failes with:
TEST mvc on s390x
data modified during a fault
make[2]: *** [../Makefile.target:116: run-mvc] Error 1
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's add the simple test based on the example from the PoP.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
This replaces paramiko with avocado.utils.ssh module, which is based
on a (open)ssh binary, supposedly more ubiquitous.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190919225905.10829-1-crosa@redhat.com>
[Cleber: consolidated existing skipUnless from tests to setUp]
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Add 15 new tests cases. They all rely on simple commands used for
detecting hardware configuration information.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1564760158-27536-3-git-send-email-aleksandar.markovic@rt-rk.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This patch restructures code organization around the test case
executions. At the same time, rather than outputing a cryptic message:
FAIL: True not found in [False],
the following will be reported too, if the command output does not meet
specified expectations:
'lspci -d 11ab:4620' output doesn't contain the word 'GT-64120'
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1564760158-27536-2-git-send-email-aleksandar.markovic@rt-rk.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The justifications being automatic destruction of the vm instances
when no longer needed and more compact test naming under a common
class.
Besides those, a smaller test makes the one and only assertion rather
obvious, which suggests that we could even get rid of the more verbose
(and manual) error messages (to be decided).
Naming of the tests tries to follow the following pattern:
test_($cpu_version)_($no_arch_capabitilies_set_or_unset)_($machine_version)
The presence of each naming component is optional, depending on
whether the test manually sets it or not.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20190828193628.7687-4-crosa@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This fixes a few mismatches between the test and the error messages
produced in case of failures.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20190828193628.7687-3-crosa@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This shuts down the VMs that won't be used any longer during the
remainder of the test.
It's debatable if the very last one should also be shutdown manually,
and my opinion is that it shouldn't because that's taken care by the
immediately following tearDown().
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20190828193628.7687-2-crosa@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Instead of looking for a specific error, let's relax the pattern
because different errors have been seen (I'm consistenly getting 52)
and the real goal of this test is to validate the framebuffer
operation, and not to reproduce one specific error.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20190919161400.26399-1-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
This is so I2C devices can be found in the ACPI namespace. Currently
that's only IPMI, but devices can be easily added now.
Adding the devices required some PCI information, and the bus itself
to be added to the PCMachineState structure.
Note that this only works on Q35, the ACPI for PIIX4 is not capable
of handling an SMBus device.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
The IPMI BT tests had a race condition, if it receive an IPMI command
to enable interrupt, it would write the message to enable interrupts
after it wrote the command response. So the test code could
receive the command response and issue the next command before the
device handled the interrupt enable command, and thus no interrupt.
So send the message to enable interrupt before the command response.
Also add some sleeps to give qemu time to handle responses, there was
no delay before, and it could result in an invalid timeout.
And re-enable the tests, as hopefully they are fixed now.
Note that I was unable to reproduce this even with the instructions
Peter gave me, but hopefully this fixes the issue.
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
-----BEGIN PGP SIGNATURE-----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=9CXf
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cleber/tags/python-next-pull-request' into staging
Python (acceptance tests) queue, 2019-09-19
# gpg: Signature made Thu 19 Sep 2019 17:24:04 BST
# gpg: using RSA key 7ABB96EB8B46B94D5E0FE9BB657E8D33A5F209F3
# gpg: Good signature from "Cleber Rosa <crosa@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 7ABB 96EB 8B46 B94D 5E0F E9BB 657E 8D33 A5F2 09F3
* remotes/cleber/tags/python-next-pull-request:
BootLinuxSshTest: Only run the tests when explicitly requested
tests/acceptance: Specify arch for QueryCPUModelExpansion
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently the Avocado framework does not distinct the time spent
downloading assets vs. the time spent running a test. With big
assets (like a full VM image) the tests likely fail.
This is a limitation known by the Avocado team.
Until this issue get fixed, do not run this tests automatically.
Tests can still be run setting the AVOCADO_TIMEOUT_EXPECTED
environment variable.
Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Reported-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20190918122748.2144-1-philmd@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
We've got a separate option to configure the accelerator nowadays, which
is shorter to type and the preferred way of specifying an accelerator.
Use it in the source and examples to show that it is the favored option.
(However, do not touch the places yet which also specify other machine
options or multiple accelerators - these are currently still better
handled with one single "-machine" statement instead)
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190904052739.22123-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
At the moment this test runs on whatever the host arch is. But it looks
for 'unavailable-features' which is an x86 specific cpu property. Tag it
to always use qemu-system-x86_64.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20190918070654.19356-1-david@gibson.dropbear.id.au>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
qemu-io now prefixes its error and warnings with "qemu-io:".
36b9986b08 fixed a lot of iotests output but forget about
026.out.nocache. Fix it too.
Fixes: 99e98d7c9f ("qemu-io: Use error_[gs]et_progname()")
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190816153015.447957-2-vsementsov@virtuozzo.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The check script is already printing out which iotest is currently
running, so printing out the name of the check-block.sh shell script
looks superfluous here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20190906113534.10907-1-thuth@redhat.com
Acked-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
When running "make check -j8" or something similar, the iotests are
running in parallel with the other tests. So when they are printing
out "Passed all xx tests" or a similar status message at the end,
it might not be quite clear that this message belongs to the iotests,
since the output might be mixed with the other tests. Thus change the
word "tests" here to "iotests" instead to avoid confusion.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20190906113920.11271-1-thuth@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The CharSocketServerTestConfig and CharSocketClientTestConfig
objects escape after they are passed to g_test_add_data_func,
but they cease existing after the scope that defines them is
closed. Make them static to fix this issue.
Fixes: e7b6ba4186
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
New feature:
UUID validation check from Yury Kotov
plus a bunch of fixes.
-----BEGIN PGP SIGNATURE-----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=W+5Q
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20190912a' into staging
Migration pull 2019-09-12
New feature:
UUID validation check from Yury Kotov
plus a bunch of fixes.
# gpg: Signature made Thu 12 Sep 2019 14:48:28 BST
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20190912a:
migration: fix one typo in comment of function migration_total_bytes()
migration/qemu-file: fix potential buf waste for extra buf_index adjustment
migration/qemu-file: remove check on writev_buffer in qemu_put_compression_data
migration: Fix postcopy bw for recovery
tests/migration: Add a test for validate-uuid capability
tests/libqtest: Allow setting expected exit status
migration: Add validate-uuid capability
qemu-file: Rework old qemu_fflush comment
migration: register_savevm_live doesn't need dev
hw/net/vmxnet3: Fix leftover unregister_savevm
migration: cleanup check on ops in savevm.handlers iterations
migration: multifd_send_thread always post p->sem_sync when error happen
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- qcow2: Allow overwriting multiple compressed clusters at once for
better performance
- nfs: add support for nfs_umount
- file-posix: write_zeroes fixes
- qemu-io, blockdev-create, pr-manager: Fix crashes and memory leaks
- qcow2: Fix the calculation of the maximum L2 cache size
- vpc: Fix return code for vpc_co_create()
- blockjob: Code cleanup
- iotests improvements (e.g. for use with valgrind)
-----BEGIN PGP SIGNATURE-----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=yYOk
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- qcow2: Allow overwriting multiple compressed clusters at once for
better performance
- nfs: add support for nfs_umount
- file-posix: write_zeroes fixes
- qemu-io, blockdev-create, pr-manager: Fix crashes and memory leaks
- qcow2: Fix the calculation of the maximum L2 cache size
- vpc: Fix return code for vpc_co_create()
- blockjob: Code cleanup
- iotests improvements (e.g. for use with valgrind)
# gpg: Signature made Fri 13 Sep 2019 11:19:19 BST
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (23 commits)
qcow2: Stop overwriting compressed clusters one by one
block/create: Do not abort if a block driver is not available
qemu-io: Don't leak pattern file in error path
iotests: extend sleeping time under Valgrind
iotests: extended timeout under Valgrind
iotests: Valgrind fails with nonexistent directory
iotests: Add casenotrun report to bash tests
iotests: exclude killed processes from running under Valgrind
iotests: allow Valgrind checking all QEMU processes
block/nfs: add support for nfs_umount
block/nfs: tear down aio before nfs_close
iotests: skip 232 when run tests as root
iotests: Test blockdev-create for vpc
iotests: Restrict nbd Python tests to nbd
iotests: Restrict file Python tests to file
iotests: Add supported protocols to execute_test()
vpc: Return 0 from vpc_co_create() on success
file-posix: Fix has_write_zeroes after NO_FALLBACK
pr-manager: Fix invalid g_free() crash bug
iotests: Test reverse sub-cluster qcow2 writes
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To synchronize the time when QEMU is running longer under the Valgrind,
increase the sleeping time in the test 247.
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As the iotests run longer under the Valgrind, the QEMU_COMM_TIMEOUT is
to be increased in the test cases 028, 183 and 192 when running under
the Valgrind.
Suggested-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The Valgrind uses the exported variable TMPDIR and fails if the
directory does not exist. Let us exclude such a test case from
being run under the Valgrind and notify the user of it.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The new function _casenotrun() is to be invoked if a test case cannot
be run for some reason. The user will be notified by a message passed
to the function. It is the caller's responsibility to make skipped a
particular test.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The Valgrind tool fails to manage its termination in multi-threaded
processes when they raise the signal SIGKILL. The bug has been reported
to the Valgrind maintainers and was registered as the bug #409141:
https://bugs.kde.org/show_bug.cgi?id=409141
Let's exclude such test cases from running under the Valgrind until a
new version with the bug fix is released because checking for the
memory issues is covered by other test cases.
Suggested-by: John Snow <jsnow@redhat.com>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With the '-valgrind' option, let all the QEMU processes be run under
the Valgrind tool. The Valgrind own parameters may be set with its
environment variable VALGRIND_OPTS, e.g.
$ VALGRIND_OPTS="--leak-check=yes" ./check -valgrind <test#>
or they may be listed in the Valgrind checked file ./.valgrindrc or
~/.valgrindrc like
--memcheck:leak-check=no
--memcheck:track-origins=yes
To exclude a specific process from running under the Valgrind, the
corresponding environment variable VALGRIND_QEMU_<name> is to be set
to the empty string:
$ VALGRIND_QEMU_IO= ./check -valgrind <test#>
When QEMU-IO process is being killed, the shell report refers to the
text of the command in _qemu_io_wrapper(), which was modified with this
patch. So, the benchmark output for the tests 039, 061 and 137 is to be
changed also.
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Message-Id: <20190903162246.18524-4-yury-kotov@yandex-team.ru>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add qtest_set_expected_status function to set expected exit status of
child process. By default expected exit status is 0.
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Message-Id: <20190903162246.18524-3-yury-kotov@yandex-team.ru>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The ordering of events that are emitted during the rmdir
test have changed with kernel >= 5.3. Semantically both
new & old orderings are correct, so we must be able to
cope with either.
To cope with this, when we see an unexpected event, we
push it back onto the queue and look and the subsequent
event to see if that matches instead.
Tested-by: Peter Xu <peterx@redhat.com>
Tested-by: Wei Yang <richardw.yang@linux.intel.com>
Tested-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The LinuxInitrd.test_with_2gib_file_should_work_with_linux_v4_16 test,
from tests/acceptance/linux_initrd.py, is currently failing to fetch
the "vmlinuz" file. The reason for the failure is that the Fedora
project retires older versions from the "dl.fedoraproject.org" URL,
and keeps them in "archives.fedoraproject.org". As an added note,
that test uses a Fedora 28 image, because of the specific Linux kernel
version requirements of the test.
For the sake of stability, let's use URLs from the archived and
supposedely ever stable URLs. The good news is that the currently
supported versions are also hosted on the later. This change limits
itself to change the URLs, while keeping the fetched files the same
(as can be evidenced by the unchanged hashes).
Documentation and the "vm tests" fedora definition were also updated.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Yash Mankad <ymankad@redhat.com>
Message-Id: <20190904005218.12536-1-crosa@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Currently this stops the mega:
make docker-test-build
from working. Once the source is patched to deal with the case this
workaround can be removed.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The Debian QEMU packages require a bunch of cross compilers for
building firmware which aren't available on all host architectures.
Using --arch-only skips this particular requirement and allows us to
install just the dependencies we need.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
On some images SHELL is pointing at a limited /bin/sh which doesn't
understand noprofile/norc. Given the run script is running bash just
invoke it directly.
This fixes:
$ make docker-test-build@IMAGE DEBUG=1
[...]
+ echo ' ./test-build'
./test-build
+ echo '* Hit Ctrl-D to continue, or type '\''exit 1'\'' to abort'
* Hit Ctrl-D to continue, or type 'exit 1' to abort
+ echo
+ /bin/sh --noprofile --norc
/bin/sh: 0: Illegal option --
Fixes: 2b0c4fa13f
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Another image that can't be used directly to build QEMU.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This should have been marked when the docker recipe was added to
prevent it being used for cross compiling QEMU. Sort the
DEBIAN_PARTIAL_IMAGE list while we are at it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Jessie has entered LTS the powerpc architecture has been dropped
so we can no longer build the image from scratch. However we can use
the snapshot archive to build the last working version.
This now only lives on an example of setting up a user-cross image as
at least on x86-64 we can use the Buster packaged cross compiler for
building test images.
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
While we are not currently using it we might as well keep the image
for later usage. So:
- update to a more recent snapshot
- clean up verbiage in commentary
- remove duplicate shell from a merge failure
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can stop relying on the movable feast that
is Sid for our cross-compiler for building tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Now Buster is released we can unify our cross build images for both
QEMU and tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We need to add additional packages to the base images to be able to
build QEMU so lets avoid building with it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
