crypto: support export RSA private keys with PKCS#8 standard.
So that users can upload this private key to linux kernel.
Signed-off-by: lei he <helei.sig11@bytedance.com>
Message-Id: <20221008085030.70212-4-helei.sig11@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add encoding interfaces for DER encoding:
1. support decoding of 'bit string', 'octet string', 'object id'
and 'context specific tag' for DER encoder.
2. implemented a simple DER encoder.
3. add more testsuits for DER encoder.
Signed-off-by: lei he <helei.sig11@bytedance.com>
Message-Id: <20221008085030.70212-3-helei.sig11@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If given a malformed LUKS header, it is possible that the algorithm
names end up being an empty string. This leads to confusing error
messages unless quoting is used to highlight where the empty string
is subsituted in the error message.
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The unit test suite is shortly going to want to convert header
endianness separately from the main I/O functions.
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This will allow unit testing code to use the structs.
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Both the master key and key slot passphrases are run through the PBKDF2
algorithm. The iterations count is expected to be generally very large
(many 10's or 100's of 1000s). It is hard to define a low level cutoff,
but we can certainly say that iterations count should be non-zero. A
zero count likely indicates an initialization mistake so reject it.
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The LUKS header data on disk is a fixed size, however, there's expected
to be a gap between the end of the header and the first key slot to get
alignment with the 2nd sector on 4k drives. This wasn't originally part
of the LUKS spec, but was always part of the reference implementation,
so it is worth validating this.
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We already validate that LUKS keyslots don't overlap with the
header, or with each other. This closes the remaining hole in
validation of LUKS file regions.
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We already check that key material doesn't overlap between key slots,
and that it doesn't overlap with the payload. We didn't check for
overlap with the LUKS header.
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Although the LUKS stripes are encoded in the keyslot header and so
potentially configurable, in pratice the cryptsetup impl mandates
this has the fixed value 4000. To avoid incompatibility apply the
same enforcement in QEMU too. This also caps the memory usage for
key material when QEMU tries to open a LUKS volume.
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The LUKS spec requires that header strings are NUL-terminated, and our
code relies on that. Protect against maliciously crafted headers by
adding validation.
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If setting credentials fails, the handshake will later fail to complete
with an obscure error message which is hard to diagnose.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When the user creates a LUKS-encrypted qcow2 image using the qemu-img
program, the passphrase is hashed using PBKDF2 with a dynamic
number of iterations. The number of iterations is determined by
measuring thread cpu time usage, such that it takes approximately
2 seconds to compute the hash.
Because Darwin doesn't implement getrusage(RUSAGE_THREAD), we get an
error message:
> qemu-img: test.qcow2: Unable to calculate thread CPU usage on this platform
for this command:
> qemu-img create --object secret,id=key,data=1234 -f qcow2 -o 'encrypt.format=luks,encrypt.key-secret=key' test.qcow2 100M
This patch implements qcrypto_pbkdf2_get_thread_cpu() for Darwin so that
the above command works.
Signed-off-by: Jungmin Park <pjm0616@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
They currently return the value of their headerlen/buflen parameter on
success. Returning 0 instead makes it clear that short reads/writes are
not possible.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220609152744.3891847-5-afaria@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Add unit test and benchmark test for crypto akcipher.
Signed-off-by: lei he <helei.sig11@bytedance.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Added gcryt implementation of RSA algorithm, RSA algorithm
implemented by gcrypt has a higher priority than nettle because
it supports raw padding.
Signed-off-by: lei he <helei.sig11@bytedance.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Implement RSA algorithm by hogweed from nettle. Thus QEMU supports
a 'real' RSA backend to handle request from guest side. It's
important to test RSA offload case without OS & hardware requirement.
Signed-off-by: lei he <helei.sig11@bytedance.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add an ANS.1 DER decoder which is used to parse asymmetric
cipher keys
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: lei he <helei.sig11@bytedance.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce new akcipher crypto class 'QCryptoAkCIpher', which supports
basic asymmetric operations: encrypt, decrypt, sign and verify.
Suggested by Daniel P. Berrangé, also add autoptr cleanup for the new
class. Thanks to Daniel!
Co-developed-by: lei he <helei.sig11@bytedance.com>
Signed-off-by: lei he <helei.sig11@bytedance.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The ``loaded=on`` option in the command line or QMP ``object-add`` either had
no effect (if ``loaded`` was the last option) or caused options to be
effectively ignored as if they were not given. The property is therefore
useless and was deprecated in 6.0; make it read-only now.
The patch is best reviewed with "-b".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Leading underscores are ill-advised because such identifiers are
reserved. Trailing underscores are merely ugly. Strip both.
Our header guards commonly end in _H. Normalize the exceptions.
Macros should be ALL_CAPS. Normalize the exception.
Done with scripts/clean-header-guards.pl.
include/hw/xen/interface/ and tools/virtiofsd/ left alone, because
these were imported from Xen and libfuse respectively.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-3-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
- share it between target/arm and target/riscv
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220423023510.30794-6-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The socket API wrappers were initially introduced in commit
00aa0040 ("Wrap recv to avoid warnings"), but made redundant with
commit a2d96af4 ("osdep: add wrappers for socket functions") which fixes
the win32 declarations and thus removed the earlier warnings.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Currently the TLS session object assumes that the caller will always
provide a hostname when using x509 creds on a client endpoint. This
relies on the caller to detect and report an error if the user has
configured QEMU with x509 credentials on a UNIX socket. The migration
code has such a check, but it is too broad, reporting an error when
the user has configured QEMU with PSK credentials on a UNIX socket,
where hostnames are irrelevant.
Putting the check into the TLS session object credentials validation
code ensures we report errors in only the scenario that matters.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220304193610.3293146-2-berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This adds support for using gnutls as a provider of the crypto
pbkdf APIs.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This adds support for using gnutls as a provider of the crypto
hmac APIs.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This adds support for using gnutls as a provider of the crypto
hash APIs.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add an implementation of the QEMU cipher APIs to the gnutls
crypto backend. XTS support is only available for gnutls
version >= 3.6.8. Since ECB mode is not exposed by gnutls
APIs, we can't use the private XTS code for compatibility.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This introduces the build logic needed to decide whether we can
use gnutls as a crypto driver backend. The actual implementations
will be introduced in following patches. We only wish to use
gnutls if it has version 3.6.14 or newer, because that is what
finally brings HW accelerated AES-XTS mode for x86_64.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the crypto layer exposes support for a 'des-rfb'
algorithm which is just normal single-DES, with the bits
in each key byte reversed. This special key munging is
required by the RFB protocol password authentication
mechanism.
Since the crypto layer is generic shared code, it makes
more sense to do the key byte munging in the VNC server
code, and expose normal single-DES support.
Replacing cipher 'des-rfb' by 'des' looks like an incompatible
interface change, but it doesn't matter. While the QMP schema
allows any QCryptoCipherAlgorithm for the 'cipher-alg' field
in QCryptoBlockCreateOptionsLUKS, the code restricts what can
be used at runtime. Thus the only effect is a change in error
message.
Original behaviour:
$ qemu-img create -f luks --object secret,id=sec0,data=123 -o cipher-alg=des-rfb,key-secret=sec0 demo.luks 1G
Formatting 'demo.luks', fmt=luks size=1073741824 key-secret=sec0 cipher-alg=des-rfb
qemu-img: demo.luks: Algorithm 'des-rfb' not supported
New behaviour:
$ qemu-img create -f luks --object secret,id=sec0,data=123 -o cipher-alg=des-rfb,key-secret=sec0 demo.luks 1G
Formatting 'demo.luks', fmt=luks size=1073741824 key-secret=sec0 cipher-alg=des-fish
qemu-img: demo.luks: Invalid parameter 'des-rfb'
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The built-in AES+XTS implementation is used for the LUKS encryption
When building system emulators it is reasonable to expect that an
external crypto library is being used instead. The performance of the
builtin XTS implementation is terrible as it has no CPU acceleration
support. It is thus not worth keeping a home grown XTS implementation
for the built-in cipher backend.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The built-in DES implementation is used for the VNC server password
authentication scheme. When building system emulators it is reasonable
to expect that an external crypto library is being used. It is thus
not worth keeping a home grown DES implementation in tree.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The XTS cipher mode was introduced in gcrypt 1.8.0, which
matches QEMU's current minimum version.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is only required on gcrypt < 1.6.0, and is thus obsolete
since
commit b33a84632a
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Fri May 14 13:04:08 2021 +0100
crypto: bump min gcrypt to 1.8.0, dropping RHEL-7 support
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Code consuming the "crypto/tlscreds*.h" APIs doesn't need
to access its internals. Move the structure definitions to
the "tlscredspriv.h" private header (only accessible by
implementations). The public headers (in include/) still
forward-declare the structures typedef.
Note, tlscreds.c and 3 of the 5 modified source files already
include "tlscredspriv.h", so only add it to tls-cipher-suites.c
and tlssession.c.
Removing the internals from the public header solves a bug
introduced by commit 7de2e85653 ("yank: Unregister function
when using TLS migration") which made migration/qemu-file-channel.c
include "io/channel-tls.h", itself sometime depends on GNUTLS,
leading to a build failure on OSX:
[2/35] Compiling C object libmigration.fa.p/migration_qemu-file-channel.c.o
FAILED: libmigration.fa.p/migration_qemu-file-channel.c.o
cc -Ilibmigration.fa.p -I. -I.. -Iqapi [ ... ] -o libmigration.fa.p/migration_qemu-file-channel.c.o -c ../migration/qemu-file-channel.c
In file included from ../migration/qemu-file-channel.c:29:
In file included from include/io/channel-tls.h:26:
In file included from include/crypto/tlssession.h:24:
include/crypto/tlscreds.h:28:10: fatal error: 'gnutls/gnutls.h' file not found
#include <gnutls/gnutls.h>
^~~~~~~~~~~~~~~~~
1 error generated.
Reported-by: Stefan Weil <sw@weilnetz.de>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/407
Fixes: 7de2e85653 ("yank: Unregister function when using TLS migration")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce the qcrypto_tls_creds_check_endpoint() helper
to access QCryptoTLSCreds internal 'endpoint' field.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@liaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The condition being tested has never been set since the day the code was
first introduced.
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210514120415.1368922-8-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It has been over two years since RHEL-8 was released, and thus per the
platform build policy, we no longer need to support RHEL-7 as a build
target. This lets us increment the minimum required gcrypt version and
assume that HMAC is always supported
Per repology, current shipping versions are:
RHEL-8: 1.8.5
Debian Buster: 1.8.4
openSUSE Leap 15.2: 1.8.2
Ubuntu LTS 18.04: 1.8.1
Ubuntu LTS 20.04: 1.8.5
FreeBSD: 1.9.2
Fedora 33: 1.8.6
Fedora 34: 1.9.3
OpenBSD: 1.9.3
macOS HomeBrew: 1.9.3
Ubuntu LTS 18.04 has the oldest version and so 1.8.0 is the new minimum.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210514120415.1368922-6-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: rebased to use .gitlab-ci.d/buildtest.yml]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that we only support modern nettle, we don't need to have local
typedefs to mask the real nettle types.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210514120415.1368922-5-berrange@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It has been over two years since RHEL-8 was released, and thus per the
platform build policy, we no longer need to support RHEL-7 as a build
target. This lets us increment the minimum required nettle version and
drop a lot of backwards compatibility code for 2.x series of nettle.
Per repology, current shipping versions are:
RHEL-8: 3.4.1
Debian Buster: 3.4.1
openSUSE Leap 15.2: 3.4.1
Ubuntu LTS 18.04: 3.4
Ubuntu LTS 20.04: 3.5.1
FreeBSD: 3.7.2
Fedora 33: 3.5.1
Fedora 34: 3.7.2
OpenBSD: 3.7.2
macOS HomeBrew: 3.7.2
Ubuntu LTS 18.04 has the oldest version and so 3.4 is the new minimum.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210514120415.1368922-4-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
[thuth: rebased to use .gitlab-ci.d/buildtest.yml]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch adds reload interface for QCryptoTLSCredsClass and implements
the interface for QCryptoTLSCredsX509.
Signed-off-by: Zihao Chang <changzihao1@huawei.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210316075845.1476-2-changzihao1@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
I am reading crypto related code, find some code style problems while
using checkpatch.pl to check crypto folder. Fix the error style
problems.
Signed-off-by: Liyang Shi <shiliyang@huawei.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If you set the loaded property to true when it was already true, the
state is overwritten without freeing the old state first. Change the
set_loaded callback so that it always frees the old state (which is a
no-op if nothing was loaded) and only then load if requestsd.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
qcrypto_secret_prop_set_loaded() forgets to reset secret->rawdata after
unloading a secret, which will lead to a double free at some point.
Because there is no use case for unloading an already loaded secret
(apart from deleting the whole secret object) and we know that nobody
could use this because it would lead to crashes, let's just forbid the
operation instead of fixing the unloading.
Eventually, we'll want to get rid of 'loaded' in the external interface,
but for the meantime this is more consistent with rng, which has a
similar property 'opened' that also can't be reset to false after it
became true.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
