test_migrate_start() will release the MigrateStart structure that passed
in, however that's not super clear to the caller because after the call
returned the pointer can still be referenced by the callers. It can easily
be a source of use-after-free.
Let's pass in a double pointer of that, then we can safely clear the
pointer for the caller after the struct is released.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220301083925.33483-26-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Fixup apply since I didn't take 24/25
Test abort during active migration when failover is disabled from QEMU
or from guest side.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20220203141537.972317-8-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The primary device is not plugged and the migration is done only with
the standby device
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20220203141537.972317-7-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If failover is off, the primary device is not plugged and
the migration is done only with the standby device.
On destination, the primary device must not be plugged.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20220203141537.972317-6-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If QEMU provides the VIRTIO_NET_F_STANDBY feature but the guest doesn't
the primary device must be kept hidden
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20220203141537.972317-5-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Check QEMU provides the VIRTIO_NET_F_STANDBY if failover is on,
and doesn't if failover is off
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20220203141537.972317-4-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This allows g_assert() to correctly report the line number of the error
in the test case.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20220203141537.972317-3-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The retry_isa test is not doing what it was intended for: The
test_retry_flush() function ignores the machine parameter completely
and thus this test does not get run with the "isapc" machine.
Moreover, in the course of time, the test_retry_flush() has been
changed to depend on PCI-related functions, so this also cannot
be fixed by simply using the machine parameter now. The correct
fix would be to switch the whole test to libqos, but until someone
has time to do this, let's simply drop the retry_isa test for now.
Message-Id: <20220121120635.220644-1-thuth@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
-netdev vhost-user,vhostforce is deprecated and vhostforce=on
should be used instead.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220210145254.157790-2-eric.auger@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The way to print uint64_t is with PRIx64, not with
a cast to long long.
Message-Id: <20220206093547.1282513-1-mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Hotplug tests need a bridge setting up on q35, for now
keep them on 'pc'.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220215162537.605030-3-dgilbert@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
For tests that rely on old hardware, e.g. floppies or IDE drives,
explicitly select the 'pc' machine type.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220215162537.605030-2-dgilbert@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It is recommended to use g_autofree or g_autoptr as it reduces
the odds of introducing memory leaks in future changes.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20220201151508.190035-3-groug@kaod.org>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
local_test_path is allocated in virtio_9p_create_local_test_dir() to hold the path
of the temporary directory. It should be freed in virtio_9p_remove_local_test_dir()
when the temporary directory is removed. Clarify the lifecycle of local_test_path
while here.
Based-on: <f6602123c6f7d0d593466231b04fba087817abbd.1642879848.git.qemu_oss@crudebyte.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20220201151508.190035-2-groug@kaod.org>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
The 9p test cases use mkdtemp() to create a temporary directory for
running the 'local' 9p tests with real files/dirs. Unlike mktemp()
which only generates a unique file name, mkdtemp() also creates the
directory, therefore the subsequent mkdir() was wrong and caused
errors on some systems.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Fixes: 136b7af2 (tests/9pfs: fix test dir for parallel tests)
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/832
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Greg Kurz <Greg Kurz <groug@kaod.org>
Message-Id: <f6602123c6f7d0d593466231b04fba087817abbd.1642879848.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1mn1fA-0005qZ-TM@lizzy.crudebyte.com>
If this starts causing failures again we should probably fix that.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220204204335.1689602-3-alex.bennee@linaro.org>
This commit adds emulation of the magnetometer on the LSM303DLHC.
It allows the magnetometer's X, Y and Z outputs to be set via the
mag-x, mag-y and mag-z properties, as well as the 12-bit
temperature output via the temperature property. Sensor can be
enabled with 'CONFIG_LSM303DLHC_MAG=y'.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Message-id: 20220130095032.35392-1-kevin.townsend@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This change implements the test suite checks for the ERST table.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <1643402289-22216-10-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This change provides a qtest that locates and then does a simple
interrogation of the ERST feature within the guest.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <1643402289-22216-9-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Following the guidelines in tests/qtest/bios-tables-test.c, this
change adds empty placeholder files per step 1 for the new ERST
table, and excludes resulting changed files in bios-tables-test-allowed-diff.h
per step 2.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1643402289-22216-2-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Previous patch [1] added explicit whitespace padding to OEM_ID/OEM_TABLE_ID
values used in test_oem_fields() testcase to avoid false positive and
bisection issues when QEMU is switched to \0' padding. As result
testcase ceased to test values that were shorter than max possible
length values.
Update testcase to make sure that it's testing shorter IDs like it
used to before [2].
1) "tests: acpi: manually pad OEM_ID/OEM_TABLE_ID for test_oem_fields() test"
2) 602b458201 ("acpi: Permit OEM ID and OEM table ID fields to be changed")
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220114142641.1727679-1-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The next commit will revert OEM fields whitespace padding to
padding with '\0' as it was before [1]. That will change OEM
Table ID for:
* SSDT.*: where it was padded from 6 characters to 8
* FACP.slic: where it was padded from 2 characters to 8
after reverting whitespace padding, it will be replaced with
'\0' which effectively will shorten OEM table ID to 6 and 2
characters.
Whitelist affected tables before introducing the change.
1) 602b458201 ("acpi: Permit OEM ID and OEM table ID fields to be changed")
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220112130332.1648664-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The next commit will revert OEM fields padding with whitespace to
padding with '\0' as it was before [1]. As result test_oem_fields() will
fail due to unexpectedly smaller ID sizes read from QEMU ACPI tables.
Pad OEM_ID/OEM_TABLE_ID manually with spaces so that values the test
puts on QEMU CLI and expected values match.
1) 602b458201 ("acpi: Permit OEM ID and OEM table ID fields to be changed")
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220112130332.1648664-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We already have a CONFIG_ISAPC switch - but we're not using it yet.
Add some "#ifdefs" to make it possible to disable this machine now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220107160713.235918-1-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The -device JSON syntax impl leaks a reference on the created
DeviceState instance. As a result when you hot-unplug the
device, the device_finalize method won't be called and thus
it will fail to emit the required DEVICE_DELETED event.
A 'json-cli' feature was previously added against the
'device_add' QMP command QAPI schema to indicated to mgmt
apps that -device supported JSON syntax. Given the hotplug
bug that feature flag is not usable for its purpose, so
we add a new 'json-cli-hotplug' feature to indicate the
-device supports JSON without breaking hotplug.
Fixes: 5dacda5167
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/802
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220105123847.4047954-2-berrange@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With more recent versions of Meson, the build.ninja file is more selective
as to what is built by default, and not building the modules results in test
failures.
Mark the modules as built-by-default and, to make the dependencies more
precise, also require them to be up-to-date before running tests.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/801
Tested-by: Li Zhang <lizhang@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The updated TPM related tables have the following additions:
Device (TPM)
{
Name (_HID, "MSFT0101" /* TPM 2.0 Security Device */) // _HID: Hardware ID
+ Name (_STR, "TPM 2.0 Device") // _STR: Description String
+ Name (_UID, One) // _UID: Unique ID
Name (_STA, 0x0F) // _STA: Status
Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Ani Sinha <ani@anisinha.ca>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Ani Sinha <ani@anisinha.ca>
Message-id: 20211223022310.575496-4-stefanb@linux.ibm.com
Message-Id: <20220104175806.872996-4-stefanb@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Replace existing TPM related tables, that are about to change, with
empty files.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Ani Sinha <ani@anisinha.ca>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Ani Sinha <ani@anisinha.ca>
Message-id: 20211223022310.575496-2-stefanb@linux.ibm.com
Message-Id: <20220104175806.872996-2-stefanb@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20211227193120.1084176-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When user uses '-acpitable' to add SLIC table, some ACPI
tables (FADT) will change its 'Oem ID'/'Oem Table ID' fields to
match that of SLIC. Test makes sure thati QEMU handles
those fields correctly when SLIC table is added with
'-acpitable' option.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20211227193120.1084176-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20211227193120.1084176-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The lsi53c895a SCSI controller might have been disabled in the target
binary, so let's check for its availability first before using it.
Message-Id: <20211222153600.976588-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The user might have disabled the pc-i440fx machine type (or it's older
versions, like done in downstream RHEL) in the QEMU binary, so let's
better check whether the machine types are available before using them.
Message-Id: <20211222153923.1000420-1-thuth@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
g_test_rand_int() must not be called before g_test_init(), otherwise
the glib will show a "g_rand_int: assertion 'rand != NULL' failed"
message in the log. So we could change the order here, but actually,
it's safer to use g_file_open_tmp() anyway, so let's use that function
now instead.
Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211222083652.776592-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Machines might not always be compiled into the QEMU binary, so
we should skip the test instead of failing if it is not available.
Message-Id: <20211220081054.151515-5-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Downstream users might want to disable legacy devices in their binaries,
so we should not blindly assume that they are available. Add some proper
checks before using them.
Message-Id: <20211220081054.151515-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The users might have built QEMU with less machines or without the
i82378 superio device. Add some checks to the endianess-test so that
it is able to deal with such stripped down QEMU versions, too.
Message-Id: <20211220081054.151515-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Devices might not always be compiled into the QEMU target binaries.
We already have the libqos framework that is good for handling such
situations, but some of the qtests are not a real good fit for the
libqos framework. Let's add a qtest_has_device() function for such
tests instead.
Message-Id: <20211220081054.151515-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These filter tests need a NIC, no matter which one, so they use a common
NIC by default. However, these common NIC models might not always have
been compiled into the QEMU target binary, so assuming that a certain NIC
is available is a bad idea. Since the exact type of NIC does not really
matter for these tests, let's switch to "-nic" instead of "-netdev" so
that QEMU can simply pick a default NIC for us.
This way we can now run the tests on other targets that have a default
machine with an on-board/default NIC, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211220103025.311759-1-thuth@redhat.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When running the qtests, there are currently a bunch of warnings about
the deprecated sga device during the boot-serial-test. Switch to
"-M graphics=off" to silence these warnings.
Message-Id: <20211220164042.397028-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Cover basic display interface usage. More cases to be added to cover
disconnections, multiple connections, corner cases. At this point, they
would be better written in Rust or Python though.
The proxy also covers reading the properties, since they are
automatically loaded at creation.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Although not used by the backend itself, use a common location for
documentation and sharing purposes.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
