KVM now allows writing to KVM_CAP_PPC_SMT which has previously been
read only. Doing so causes KVM to act, for that VM, as if the host's
SMT mode was the given value. This is particularly important on Power
9 systems because their default value is 1, but they are able to
support values up to 8.
This patch introduces a way to control this capability via a new
machine property called VSMT ("Virtual SMT"). If the value is not set
on the command line a default is chosen that is, when possible,
compatible with legacy systems.
Note that the intialization of KVM_CAP_PPC_SMT has changed slightly
because it has changed (in KVM) from a global capability to a
VM-specific one. This won't cause a problem on older KVMs because VM
capabilities fall back to global ones.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Allow MAL with more RX and TX channels as found in newer versions.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This device appears in other SoCs as well not just in 405 ones
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The concept of a VCPU ID that differs from the CPU's index
(cpu->cpu_index) exists only within SPAPR machines so, move the
functions ppc_get_vcpu_id() and ppc_get_cpu_by_vcpu_id() into spapr.c
and rename them appropriately.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This patch is a follow up on the discussions made in patch
"hw/ppc: disable hotplug before CAS is completed" that can be
found at [1].
At this moment, we do not support CPU/memory hotplug in early
boot stages, before CAS. When a hotplug occurs, the event is logged
in an internal RTAS event log queue and an IRQ pulse is fired. In
regular conditions, the guest handles the interrupt by executing
check_exception, fetching the generated hotplug event and enabling
the device for use.
In early boot, this IRQ isn't caught (SLOF does not handle hotplug
events), leaving the event in the rtas event log queue. If the guest
executes check_exception due to another hotplug event, the re-assertion
of the IRQ ends up de-queuing the first hotplug event as well. In short,
a device hotplugged before CAS is considered coldplugged by SLOF.
This leads to device misbehavior and, in some cases, guest kernel
Ooops when trying to unplug the device.
A proper fix would be to turn every device hotplugged before CAS
as a colplugged device. This is not trivial to do with the current
code base though - the FDT is written in the guest memory at
ppc_spapr_reset and can't be retrieved without adding extra state
(fdt_size for example) that will need to managed and migrated. Adding
the hotplugged DT in the middle of CAS negotiation via the updated DT
tree works with CPU devs, but panics the guest kernel at boot. Additional
analysis would be necessary for LMBs and PCI devices. There are
questions to be made in QEMU/SLOF/kernel level about how we can make
this change in a sustainable way.
With Linux guests, a fix would be the kernel executing check_exception
at boot time, de-queueing the events that happened in early boot and
processing them. However, even if/when the newer kernels start
fetching these events at boot time, we need to take care of older
kernels that won't be doing that.
This patch works around the situation by issuing a CAS reset if a hotplugged
device is detected during CAS:
- the DRC conditions that warrant a CAS reset is the same as those that
triggers a DRC migration - the DRC must have a device attached and
the DRC state is not equal to its ready_state. With that in mind, this
patch makes use of 'spapr_drc_needed' to determine if a CAS reset
is needed.
- In the middle of CAS negotiations, the function
'spapr_hotplugged_dev_before_cas' goes through all the DRCs to see
if there are any DRC that requires a reset, using spapr_drc_needed. If
that happens, returns '1' in 'spapr_h_cas_compose_response' which will set
spapr->cas_reboot to true, causing the machine to reboot.
No changes are made for coldplug devices.
[1] http://lists.nongnu.org/archive/html/qemu-devel/2017-08/msg02855.html
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The sPAPR machine isn't clearing up the pending events QTAILQ on
machine reboot. This allows for unprocessed hotplug/epow events
to persist in the queue after reset and, when reasserting the IRQs in
check_exception later on, these will be being processed by the OS.
This patch implements a new function called 'spapr_clear_pending_events'
that clears up the pending_events QTAILQ. This helper is then called
inside ppc_spapr_reset to clear up the events queue, preventing
old/deprecated events from persisting after a reset.
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- Daniel P. Berrange: [0/2] Fix / skip recent iotests with LUKS driver
- Eric Blake: [0/3] nbd: Use common read/write-all qio functions
-----BEGIN PGP SIGNATURE-----
Comment: Public key at http://people.redhat.com/eblake/eblake.gpg
iQEcBAABCAAGBQJZsBGjAAoJEKeha0olJ0NqVRoH/iiNEB2SlZFFl5W++wf3Ekq/
lvtZjK3rxpvRXvy6LiRsYVs27Etc8E9aSw2UK6aaqgA3qR8g3zdmwUZb9w3slkeI
OXedt0fS5IpQ4UP0ORUBb/LgyOgW3uA0UjHBTEAKl0SyvFPx+TrTZXxqQUqlAc9A
lFaA0g71xvfqWWhXmt0PQjRr9bBEpe+4L4NgOypa+Z3xbBAektx390S8N/b/P8fC
FNwAqBPTY5XAgJGnEhL9EUOdUWnVgoyG1MR63puJzULYi+2+TlpR2w030qRif75b
h7TqYUvwKLnoqMyhBb5LmyhcqwNdphz/1DsEudk18XGuvC94WYkopC3rT7TPWLs=
=vGUc
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2017-09-06' into staging
nbd patches for 2017-09-06
- Daniel P. Berrange: [0/2] Fix / skip recent iotests with LUKS driver
- Eric Blake: [0/3] nbd: Use common read/write-all qio functions
# gpg: Signature made Wed 06 Sep 2017 16:17:55 BST
# gpg: using RSA key 0xA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>"
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>"
# gpg: aka "[jpeg image of size 6874]"
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2017-09-06:
nbd: Use new qio_channel_*_all() functions
io: Add new qio_channel_read{, v}_all_eof functions
io: Yield rather than wait when already in coroutine
iotests: blacklist 194 with the luks driver
iotests: rewrite 192 to use _launch_qemu to fix LUKS support
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* cleanups converting to DEFINE_PROP_LINK
* allwinner-a10: mark as not user-creatable
* initial patches working towards ARMv8M support
* implement generating aborts on memory transaction failures
* make BXJ behave correctly (ie not UNDEF) on ARMv6-and-later
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=URgX
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20170907' into staging
target-arm:
* cleanups converting to DEFINE_PROP_LINK
* allwinner-a10: mark as not user-creatable
* initial patches working towards ARMv8M support
* implement generating aborts on memory transaction failures
* make BXJ behave correctly (ie not UNDEF) on ARMv6-and-later
# gpg: Signature made Thu 07 Sep 2017 14:26:07 BST
# gpg: using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20170907: (31 commits)
target/arm: Add Jazelle feature
target/arm: Implement new do_transaction_failed hook
hw/arm: Set ignore_memory_transaction_failures for most ARM boards
boards.h: Define new flag ignore_memory_transaction_failures
target/arm: Implement BXNS, and banked stack pointers
target/arm: Move regime_is_secure() to target/arm/internals.h
target/arm: Make CFSR register banked for v8M
target/arm: Make MMFAR banked for v8M
target/arm: Make CCR register banked for v8M
target/arm: Make MPU_CTRL register banked for v8M
target/arm: Make MPU_RNR register banked for v8M
target/arm: Make MPU_RBAR, MPU_RLAR banked for v8M
target/arm: Make MPU_MAIR0, MPU_MAIR1 registers banked for v8M
target/arm: Make VTOR register banked for v8M
nvic: Add NS alias SCS region
target/arm: Make CONTROL register banked for v8M
target/arm: Make FAULTMASK register banked for v8M
target/arm: Make PRIMASK register banked for v8M
target/arm: Make BASEPRI register banked for v8M
target/arm: Add MMU indexes for secure v8M
...
# Conflicts:
# target/arm/translate.c
-----BEGIN PGP SIGNATURE-----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=lrj8
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20170906a' into staging
migration pull 2017-09-06
# gpg: Signature made Wed 06 Sep 2017 19:39:23 BST
# gpg: using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20170906a:
migration: dump str in migrate_set_state trace
snapshot/tests: Try loadvm twice
migration: Reset rather than destroy main_thread_load_event
runstate/migrate: Two more transitions
host-utils: Simplify pow2ceil()
host-utils: Proactively fix pow2floor(), switch to unsigned
xbzrle: Drop unused cache_resize()
migration: Report when bdrv_inactivate_all fails
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZsBwXAAoJEGTfOOivfiFfst4IAIkgld9yabywTZc5KUvJmMc/
Zh8BoI+1L27NqcQiRAB2m82yFho8jKdk618dFp2KadXzhmKr6CDztsD6y0BPg7YW
pBWakZ4Q/HpAIwkAKiKoXZ5+go13z3OSjYZxYCDZzokl0cgxfKshoN2RYVD0L1my
SGPp2DuF2YgrNy0VHU7Ki+lW77f1wYPykDv6geb7NGI4ePUvSpoCLKdcoPmCQOut
sFiRijkW6W2HB70Tfq+OJFBb2UqJEZzu1uDwP156FKWGDrzGyP0tclRnnmrHuder
wxdUoiscz5Ow4J4oa9/CERRAR11S1aHF45ofwjf2VpuqyeZy98d4mX9GG4oVqEc=
=ItTI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-tgt-20170906' into staging
tcg generic translate loop v15
# gpg: Signature made Wed 06 Sep 2017 17:02:31 BST
# gpg: using RSA key 0x64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-tgt-20170906: (32 commits)
target/arm: Perform per-insn cross-page check only for Thumb
target/arm: Split out thumb_tr_translate_insn
target/arm: Move ss check to init_disas_context
target/arm: [a64] Move page and ss checks to init_disas_context
target/arm: [tcg] Port to generic translation framework
target/arm: [tcg,a64] Port to disas_log
target/arm: [tcg] Port to disas_log
target/arm: [tcg,a64] Port to tb_stop
target/arm: [tcg] Port to tb_stop
target/arm: [tcg,a64] Port to translate_insn
target/arm: [tcg] Port to translate_insn
target/arm: [tcg,a64] Port to breakpoint_check
target/arm: [tcg,a64] Port to insn_start
target/arm: [tcg] Port to insn_start
target/arm: [tcg] Port to tb_start
target/arm: [tcg,a64] Port to init_disas_context
target/arm: [tcg] Port to init_disas_context
target/arm: [tcg] Port to DisasContextBase
target/i386: [tcg] Port to generic translation framework
target/i386: [tcg] Port to disas_log
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Define a new MachineClass field ignore_memory_transaction_failures.
If this is flag is true then the CPU will ignore memory transaction
failures which should cause the CPU to take an exception due to an
access to an unassigned physical address; the transaction will
instead return zero (for a read) or be ignored (for a write). This
should be set only by legacy board models which rely on the old
RAZ/WI behaviour for handling devices that QEMU does not yet model.
New board models should instead use "unimplemented-device" for all
memory ranges where the guest will attempt to probe for a device that
QEMU doesn't implement and a stub device is required.
We need this for ARM boards, where we're about to implement support for
generating external aborts on memory transaction failures. Too many
of our legacy board models rely on the RAZ/WI behaviour and we
would break currently working guests when their "probe for device"
code provoked an external abort rather than a RAZ.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1504626814-23124-2-git-send-email-peter.maydell@linaro.org
For v8M the range 0xe002e000..0xe002efff is an alias region which
for secure accesses behaves like a NonSecure access to the main
SCS region. (For nonsecure accesses including when the security
extension is not implemented, it is RAZ/WI.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1503414539-28762-11-git-send-email-peter.maydell@linaro.org
Rather than open-coding our own read/write-all functions, we
can make use of the recently-added qio code. It slightly
changes the error message in one of the iotests.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170905191114.5959-4-eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Some callers want to distinguish between clean EOF (no bytes read)
vs. a short read (at least one byte read, but EOF encountered
before reaching the desired length), as it allows clients the
ability to do a graceful shutdown when a server shuts down at
defined safe points in the protocol, rather than treating all
shutdown scenarios as an error due to EOF. However, we don't want
to require all callers to have to check for early EOF. So add
another wrapper function that can be used by the callers that care
about the distinction.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170905191114.5959-3-eblake@redhat.com>
Acked-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Message-Id: <150002073981.22386.9870422422367410100.stgit@frigg.lan>
[rth: Moved max_insns adjustment from tb_start to init_disas_context.
Removed pc_next return from translate_insn.
Removed tcg_check_temp_count from generic loop.
Moved gen_io_end to exactly match gen_io_start.
Use qemu_log instead of error_report for temporary leaks.
Moved TB size/icount assignments before disas_log.]
Signed-off-by: Richard Henderson <rth@twiddle.net>
Used later. An enum makes expected values explicit and
bounds the value space of switches.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <150002049746.22386.2316077281615710615.stgit@frigg.lan>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This will allow some amount of cleanup to happen before
switching the backends over to enum DisasJumpType.
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1501148776-16890-4-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The function's stated contract is simple enough: "round down to the
nearest power of 2". Suggests the domain is the representable numbers
>= 1, because that's the smallest power of two.
The implementation doesn't check for domain errors, but returns
garbage instead:
* For negative arguments, pow2floor() returns -2^63, which is not even
a power of two, let alone the nearest one.
What sort of works is passing *unsigned* arguments >= 2^63. The
implicit conversion to signed is implementation defined, but
commonly yields the (negative) two's complement. pow2floor() then
returns -2^63. Callers that convert that back to unsigned get the
correct value 2^63.
* For a zero argument, pow2floor() shifts right by 64. Undefined
behavior. Common actual behavior is to shift by 0, yielding -2^63.
Fix by switching from int64_t to uint64_t and amending the contract to
map zero to zero.
Callers are fine with that:
* memory_access_size()
This function makes no sense unless the argument is positive and the
return value fits into int.
* raw_refresh_limits()
Passes an int between 1 and BDRV_REQUEST_MAX_BYTES.
* iscsi_refresh_limits()
Passes an integer between 0 and INT_MAX, converts the result to
uint32_t. Passing zero would be undefined behavior, but commonly
yield zero. The patch gives us the zero without the undefined
behavior.
* cache_init()
Passes a positive int64_t argument.
* xbzrle_cache_resize()
Passes a positive int64_t argument (>= TARGET_PAGE_SIZE, actually).
* spapr_node0_size()
Passes a positive uint64_t argument, and converts the result to
hwaddr, i.e. uint64_t.
* spapr_populate_memory()
Passes a positive hwaddr argument, and converts the result to
hwaddr.
Cc: Juan Quintela <quintela@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1501148776-16890-3-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
block/throttle.c uses existing I/O throttle infrastructure inside a
block filter driver. I/O operations are intercepted in the filter's
read/write coroutines, and referred to block/throttle-groups.c
The driver can be used with the syntax
-drive driver=throttle,file.filename=foo.qcow2,throttle-group=bar
which registers the throttle filter node with the ThrottleGroup 'bar'. The
given group must be created beforehand with object-add or -object.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We were using -1 instead of the real size because the functions check
what is bigger, size in bytes or the size of the iov. Recent gcc's
barf at this.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
--
Remove comments about this feature.
Fix missing -1.
ThrottleGroup is converted to an object. This will allow the future
throttle block filter drive easy creation and configuration of throttle
groups in QMP and cli.
A new QAPI struct, ThrottleLimits, is introduced to provide a shared
struct for all throttle configuration needs in QMP.
ThrottleGroups can be created via CLI as
-object throttle-group,id=foo,x-iops-total=100,x-..
where x-* are individual limit properties. Since we can't add non-scalar
properties in -object this interface must be used instead. However,
setting these properties must be disabled after initialization because
certain combinations of limits are forbidden and thus configuration
changes should be done in one transaction. The individual properties
will go away when support for non-scalar values in CLI is implemented
and thus are marked as experimental.
ThrottleGroup also has a `limits` property that uses the ThrottleLimits
struct. It can be used to create ThrottleGroups or set the
configuration in existing groups as follows:
{ "execute": "object-add",
"arguments": {
"qom-type": "throttle-group",
"id": "foo",
"props" : {
"limits": {
"iops-total": 100
}
}
}
}
{ "execute" : "qom-set",
"arguments" : {
"path" : "foo",
"property" : "limits",
"value" : {
"iops-total" : 99
}
}
}
This also means a group's configuration can be fetched with qom-get.
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
timer_cb() needs to know about the current Aio context of the throttle
request that is woken up. In order to make ThrottleGroupMember backend
agnostic, this information is stored in an aio_context field instead of
accessing it from BlockBackend.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This commit eliminates the 1:1 relationship between BlockBackend and
throttle group state. Users will be able to create multiple throttle
nodes, each with its own throttle group state, in the future. The
throttle group state cannot be per-BlockBackend anymore, it must be
per-throttle node. This is done by gathering ThrottleGroup membership
details from BlockBackendPublic into ThrottleGroupMember and refactoring
existing code to use the structure.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These functions wait until they are able to read / write the full
requested data buffer(s).
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The non-blocking connect mechanism is obsolete, and it doesn't
work well in inet connection, because it will call getaddrinfo
first and getaddrinfo will blocks on DNS lookups. Since commit
e65c67e4 & d984464e, the non-blocking connect of migration goes
through QIOChannel in a different manner(using a thread), and
nobody use this old non-blocking connect anymore.
Any newly written code which needs a non-blocking connect should
use the QIOChannel code, so we can drop NonBlockingConnectHandler
as a concept entirely.
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170831105456.9558-1-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_co_get_block_status_from_file() and
bdrv_co_get_block_status_from_backing() set *file to bs->file and
bs->backing respectively, so that bdrv_co_get_block_status() can recurse
to them. Future block drivers won't have to duplicate code to implement
this.
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function is not used anywhere, so remove it.
Markus Armbruster adds:
The i82078 floppy device model used to call bdrv_media_changed() to
implement its media change bit when backed by a host floppy. This
went away in 21fcf36 "fdc: simplify media change handling".
Probably broke host floppy media change. Host floppy pass-through
was dropped in commit f709623. bdrv_media_changed() has never been
used for anything else. Remove it.
(Source is Message-ID: <87y3ruaypm.fsf@dusky.pond.sub.org>)
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The following functions fail if bs->drv is a filter and does not
implement them:
bdrv_probe_blocksizes
bdrv_probe_geometry
bdrv_truncate
bdrv_has_zero_init
bdrv_get_info
Instead, the call should be passed to bs->file if it exists, to allow
filter drivers to support those methods without implementing them. This
commit makes `drv->is_filter = true` imply that these callbacks will be
forwarded to bs->file by default, so disabling support for these
functions must be done explicitly.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently we have a rather half-baked setup for allowing CPUs to
generate exceptions on accesses to invalid memory: the CPU has a
cpu_unassigned_access() hook which the memory system calls in
unassigned_mem_write() and unassigned_mem_read() if the current_cpu
pointer is non-NULL. This was originally designed before we
implemented the MemTxResult type that allows memory operations to
report a success or failure code, which is why the hook is called
right at the bottom of the memory system. The major problem with
this is that it means that the hook can be called even when the
access was not actually done by the CPU: for instance if the CPU
writes to a DMA engine register which causes the DMA engine to begin
a transaction which has been set up by the guest to operate on
invalid memory then this will casue the CPU to take an exception
incorrectly. Another minor problem is that currently if a device
returns a transaction error then this won't turn into a CPU exception
at all.
The right way to do this is to have allow the CPU to respond
to memory system transaction failures at the point where the
CPU specific code calls into the memory system.
Define a new QOM CPU method and utility function
cpu_transaction_failed() which is called in these cases.
The functionality here overlaps with the existing
cpu_unassigned_access() because individual target CPUs will
need some work to convert them to the new system. When this
transition is complete we can remove the old cpu_unassigned_access()
code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Move the MemTxResult type to memattrs.h. We're going to want to
use it in cpu/qom.h, which doesn't want to include all of
memory.h. In practice MemTxResult and MemTxAttrs are pretty
closely linked since both are used for the new-style
read_with_attrs and write_with_attrs callbacks, so memattrs.h
is a reasonable home for this rather than creating a whole
new header file for it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
The reset width register controls how the pulse on the SoC's WDTRST{1,2}
pins behaves. A pulse is emitted if the external reset bit is set in
WDT_CTRL. On the AST2500 WDT_RESET_WIDTH can consume magic bit patterns
to configure push-pull/open-drain and active-high/active-low
behaviours and thus needs some special handling in the write path.
As some of the capabilities depend on the SoC version a silicon-rev
property is introduced, which is used to guard version-specific
behaviour.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some ELF files have program headers that specify segments that
are of zero size. Ignore them, rather than trying to create
zero-length ROM blobs for them, because the zero-length blob
can falsely trigger the overlapping-ROM-blobs check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Hua Yanghao <huayanghao@gmail.com>
Message-id: 1502116754-18867-3-git-send-email-peter.maydell@linaro.org
For embedded systems, notably ARM, one common use of ELF
file segments is that the 'physical addresses' represent load addresses
and the 'virtual addresses' execution addresses, such that
the load addresses are packed into ROM or flash, and the
relocation and zero-initialization of data is done at runtime.
This means that the 'memsz' in the segment header represents
the runtime size of the segment, but the size that needs to
be loaded is only the 'filesz'. In particular, paddr+memsz
may overlap with the next segment to be loaded, as in this
example:
0x70000001 off 0x00007f68 vaddr 0x00008150 paddr 0x00008150 align 2**2
filesz 0x00000008 memsz 0x00000008 flags r--
LOAD off 0x000000f4 vaddr 0x00000000 paddr 0x00000000 align 2**2
filesz 0x00000124 memsz 0x00000124 flags r--
LOAD off 0x00000218 vaddr 0x00000400 paddr 0x00000400 align 2**3
filesz 0x00007d58 memsz 0x00007d58 flags r-x
LOAD off 0x00007f70 vaddr 0x20000140 paddr 0x00008158 align 2**3
filesz 0x00000a80 memsz 0x000022f8 flags rw-
LOAD off 0x000089f0 vaddr 0x20002438 paddr 0x00008bd8 align 2**0
filesz 0x00000000 memsz 0x00004000 flags rw-
LOAD off 0x000089f0 vaddr 0x20000000 paddr 0x20000000 align 2**0
filesz 0x00000000 memsz 0x00000140 flags rw-
where the segment at paddr 0x8158 has a memsz of 0x2258 and
would overlap with the segment at paddr 0x8bd8 if QEMU's loader
tried to honour it. (At runtime the segments will not overlap
since their vaddrs are more widely spaced than their paddrs.)
Currently if you try to load an ELF file like this with QEMU then
it will fail with an error "rom: requested regions overlap",
because we create a ROM image for each segment using the memsz
as the size.
Support ELF files using this scheme, by truncating the
zero-initialized part of the segment if it would overlap another
segment. This will retain the existing loader behaviour for
all ELF files we currently accept, and also accept ELF files
which only need 'filesz' bytes to be loaded.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1502116754-18867-2-git-send-email-peter.maydell@linaro.org
The armv7m_nvic.h header file was accidentally placed in
include/hw/arm; move it to include/hw/intc to match where
its corresponding .c file lives.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 1501692241-23310-15-git-send-email-peter.maydell@linaro.org
-----BEGIN PGP SIGNATURE-----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=eUZW
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2017-09-01-v3' into staging
QAPI patches for 2017-09-01
# gpg: Signature made Mon 04 Sep 2017 12:30:31 BST
# gpg: using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2017-09-01-v3: (47 commits)
qapi: drop the sentinel in enum array
qapi: Change data type of the FOO_lookup generated for enum FOO
qapi: Convert indirect uses of FOO_lookup[...] to qapi_enum_lookup()
qapi: Mechanically convert FOO_lookup[...] to FOO_str(...)
qapi: Generate FOO_str() macro for QAPI enum FOO
qapi: Avoid unnecessary use of enum lookup table's sentinel
qapi: Use qapi_enum_parse() in input_type_enum()
crypto: Use qapi_enum_parse() in qcrypto_block_luks_name_lookup()
quorum: Use qapi_enum_parse() in quorum_open()
block: Use qemu_enum_parse() in blkdebug_debug_breakpoint()
hmp: Use qapi_enum_parse() in hmp_migrate_set_parameter()
hmp: Use qapi_enum_parse() in hmp_migrate_set_capability()
tpm: Clean up model registration & lookup
tpm: Clean up driver registration & lookup
qapi: Drop superfluous qapi_enum_parse() parameter max
qapi: Update qapi-code-gen.txt examples to match current code
qapi-schema: Improve section headings
qapi-schema: Move queries from common.json to qapi-schema.json
qapi-schema: Make block-core.json self-contained
qapi-schema: Fold event.json back into qapi-schema.json
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently, a FOO_lookup is an array of strings terminated by a NULL
sentinel.
A future patch will generate enums with "holes". NULL-termination
will cease to work then.
To prepare for that, store the length in the FOO_lookup by wrapping it
in a struct and adding a member for the length.
The sentinel will be dropped next.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170822132255.23945-13-marcandre.lureau@redhat.com>
[Basically redone]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-16-git-send-email-armbru@redhat.com>
[Rebased]
The next commit will put it to use. May look pointless now, but we're
going to change the FOO_lookup's type, and then it'll help.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-13-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
We have a strict separation between enum TpmModel and tpm_models[]:
* TpmModel may have any number of members. It just happens to have one.
* tpm_register_model() uses the first empty slot in tpm_models[].
If you register more than tpm_models[] has space,
tpn_register_model() fails. Its caller silently ignores the
failure.
Register the same TpmModel more than once has no effect other than
wasting tpm_models[] slots: tpm_model_is_registered() is happy with
the first one it finds.
Since we only ever register one model, and tpm_models[] has space for
just that one, this contraption even works.
Turn tpm_models[] into a straight map from enum TpmType to bool. Much
simpler.
Cc: Stefan Berger <stefanb@us.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-5-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[Commit message typo fixed]
We have a strict separation between enum TpmType and be_drivers[]:
* TpmType may have any number of members. It just happens to have one.
* tpm_register_driver() uses the first empty slot in be_drivers[].
If you register more than tpm_models[] has space,
tpm_register_driver() fails. Its caller silently ignores the
failure.
If you register more than one with a given TpmType,
tpm_display_backend_drivers() will shows all of them, but
tpm_driver_find_by_type() and tpm_get_backend_driver() will find
only the one one that registered first.
Since we only ever register one driver, and be_drivers[] has space for
just that one, this contraption even works.
Turn be_drivers[] into a straight map from enum TpmType to driver.
Much simpler, and has a decent chance to actually work should we ever
acquire additional drivers.
While there, use qapi_enum_parse() in tpm_get_backend_driver().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170822132255.23945-8-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, superfluous initializer dropped, commit message rewritten]
Cc: Stefan Berger <stefanb@us.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-4-git-send-email-armbru@redhat.com>
The lookup tables have a sentinel, no need to make callers pass their
size.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-3-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Rebased, commit message corrected]
As they are going to be used in the following patches.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170825105913.4060-9-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
