When running in TAP mode, stdout is reserved for the TAP protocol.
To see the "diff" of the failed test, we have to print it to
stderr instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220209101530.3442837-8-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Fix crash in blockdev-reopen with iothreads
- fdc-isa: Respect QOM properties when building AML
-----BEGIN PGP SIGNATURE-----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=/1qA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kwolf-gitlab/tags/for-upstream' into staging
Block layer patches
- Fix crash in blockdev-reopen with iothreads
- fdc-isa: Respect QOM properties when building AML
# gpg: Signature made Fri 11 Feb 2022 17:44:52 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kwolf-gitlab/tags/for-upstream:
hw/block/fdc-isa: Respect QOM properties when building AML
iotests: Test blockdev-reopen with iothreads and throttling
block: Lock AioContext for drain_end in blockdev-reopen
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Put an NBD block device into an I/O thread, and then read data from it,
hoping that the NBD connection will yield during that read. When it
does, the coroutine must be reentered in the block device's I/O thread,
which will only happen if the NBD block driver attaches the connection's
QIOChannel to the new AioContext. It did not do that after 4ddb5d2fde
("block/nbd: drop connection_co") and prior to "block/nbd: Move s->ioc
on AioContext change", which would cause an assertion failure.
To improve our chances of yielding, the NBD server is throttled to
reading 64 kB/s, and the NBD client reads 128 kB, so it should yield at
some point.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Prior to "block/nbd: Delete reconnect delay timer when done" and
"block/nbd: Delete open timer when done", both of those timers would
remain scheduled even after successfully (re-)connecting to the server,
and they would not even be deleted when the BDS is deleted.
This test constructs exactly this situation:
(1) Configure an @open-timeout, so the open timer is armed, and
(2) Configure a @reconnect-delay and trigger a reconnect situation
(which succeeds immediately), so the reconnect delay timer is armed.
Then we immediately delete the BDS, and sleep for longer than the
@open-timeout and @reconnect-delay. Prior to said patches, this caused
one (or both) of the timer CBs to access already-freed data.
Accessing freed data may or may not crash, so this test can produce
false successes, but I do not know how to show the problem in a better
or more reliable way. If you run this test on "block/nbd: Assert there
are no timers when closed" and without the fix patches mentioned above,
you should reliably see an assertion failure.
(But all other tests that use the reconnect delay timer (264 and 277)
will fail in that configuration, too; as will nbd-reconnect-on-open,
which uses the open timer.)
Remove this test from the quick group because of the two second sleep
this patch introduces.
(I decided to put this test case into 281, because the main bug this
series addresses is in the interaction of the NBD block driver and I/O
threads, which is precisely the scope of 281. The test case for that
other bug will also be put into the test class added here.
Also, excuse the test class's name, I couldn't come up with anything
better. The "yield" part will make sense two patches from now.)
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
This is a rather simple class that allows creating a QSD instance
running in the background and stopping it when no longer needed.
The __del__ handler is a safety net for when something goes so wrong in
a test that e.g. the tearDown() method is not called (e.g. setUp()
launches the QSD, but then launching a VM fails). We do not want the
QSD to continue running after the test has failed, so __del__() will
take care to kill it.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
The 'throttle' block driver implements .bdrv_co_drain_end, so
blockdev-reopen will have to wait for it to complete in the polling
loop at the end of qmp_blockdev_reopen(). This makes AIO_WAIT_WHILE()
release the AioContext lock, which causes a crash if the lock hasn't
correctly been taken.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220203140534.36522-3-kwolf@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This allows us to pack in some extra information about the failure,
which guarantees that if the caller did not *intentionally* cause a
failure (by capturing this Exception), some pretty good clues will be
printed at the bottom of the traceback information.
This will help make failures in the event of a non-negative return code
more obvious when they go unhandled; the current behavior in
_post_shutdown() is to print a warning message only in the event of
signal-based terminations (for negative return codes).
(Note: In Python, catching BaseException instead of Exception catches a
broader array of Exception events, including SystemExit and
KeyboardInterrupt. We do not want to "wrap" such exceptions as a
VMLaunchFailure, because that will 'downgrade' the exception from a
BaseException to a regular Exception. We do, however, want to perform
cleanup in either case, so catch on the broadest scope and
wrap-and-re-raise only in the more targeted scope.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20220201041134.1237016-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This test checks that a raw image in use by a virtio-blk device does not
share the WRITE permission both before and after migration.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
compression_type can't be used if we want to create image with
compat=0.10. So, skip these tests, not many of them.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-20-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
The test-case "Corrupted size field in compressed cluster descriptor"
heavily depends on zlib compression type. So, make it explicit. This
way test passes with IMGOPTS='compression_type=zstd'.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-19-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Don't touch other incompatible bits, like compression-type. This makes
the test pass with IMGOPTS='compression_type=zstd'.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-18-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We want iotests pass with both the default zlib compression and with
IMGOPTS='compression_type=zstd'.
Actually the only test that is interested in real compression type in
test output is 287 (test for qcow2 compression type), so implement
specific option for it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-17-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
_qcow2_dump_header has filter for compression type, so this change
makes test pass with IMGOPTS='compression_type=zstd'.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-16-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We are going to add filtering in _qcow2_dump_header and want all tests
use it.
The patch is generated by commands:
cd tests/qemu-iotests
sed -ie 's/$PYTHON qcow2.py "$TEST_IMG" dump-header\($\| \)/_qcow2_dump_header\1/' ??? tests/*
(the difficulty is to avoid converting dump-header-exts)
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-15-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We'll use it in tests instead of explicit qcow2.py. Then we are going
to add some filtering in _qcow2_dump_header.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-14-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Instead of qemu_img_log("info", ..) use generic helper img_info_log().
img_info_log() has smarter logic. For example it use filter_img_info()
to filter output, which in turns filter a compression type. So it will
help us in future when we implement a possibility to use zstd
compression by default (with help of some runtime config file or maybe
build option). For now to test you should recompile qemu with a small
addition into block/qcow2.c before
"if (qcow2_opts->has_compression_type":
if (!qcow2_opts->has_compression_type && version >= 3) {
qcow2_opts->has_compression_type = true;
qcow2_opts->compression_type = QCOW2_COMPRESSION_TYPE_ZSTD;
}
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-12-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We want iotests pass with both the default zlib compression and with
IMGOPTS='compression_type=zstd'.
Actually the only test that is interested in real compression type in
test output is 287 (test for qcow2 compression type) and it's in bash.
So for now we can safely filter out compression type in all qcow2
tests.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-11-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
The only "feature" of this "Formatting ..." line is that we have to
update it every time we add new option. Let's drop it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-10-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
The test checks different options. It of course fails if set
IMGOPTS='compression_type=zstd'. So, let's be explicit in what
compression type we want and independent of IMGOPTS. Test both existing
compression types.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-9-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
The test prints qcow2 header fields which depends on chosen compression
type. So, let's be explicit in what compression type we want and
independent of IMGOPTS. Test both existing compression types.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-8-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Move the logic to more generic qemu_img_pipe_and_status(). Also behave
better when we have several -o options. And reuse argument parser of
course.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-7-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
qemu_img_verbose() has a drawback of not going through generic
qemu_img_pipe_and_status(). qemu_img_verbose() is not very popular, so
update the only two users to qemu_img_log() and drop qemu_img_verbose()
at all.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-6-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Adding support of IMGOPTS (like in bash tests) allows user to pass a
lot of different options. Still, some may require additional logic.
Now we want compression_type option, so add some smart logic around it:
ignore compression_type=zstd in IMGOPTS, if test want qcow2 in
compatibility mode. As well, ignore compression_type for non-qcow2
formats.
Note that we may instead add support only to qemu_img_create(), but
that works bad:
1. We'll have to update a lot of tests to use qemu_img_create instead
of qemu_img('create'). (still, we may want do it anyway, but no
reason to create a dependancy between task of supporting IMGOPTS and
updating a lot of tests)
2. Some tests use qemu_img_pipe('create', ..) - even more work on
updating
3. Even if we update all tests to go through qemu_img_create, we'll
need a way to avoid creating new tests using qemu_img*('create') -
add assertions.. That doesn't seem good.
So, let's add support of IMGOPTS to most generic
qemu_img_pipe_and_status().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-5-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We are going to support IMGOPTS for python iotests. Still some iotests
will not work with common IMGOPTS used with bash iotests like
specifying refcount_bits and compat qcow2 options. So we
should define corresponding unsupported_imgopts for now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211223160144.1097696-4-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We are going to support some addition IMGOPTS in python iotests like
in bash iotests. Similarly to bash iotests, we want a way to skip some
tests which can't work with specific IMGOPTS.
Globally for python iotests we will not support things like
'data_file=$TEST_IMG.ext_data_file' in IMGOPTS, so, forbid this
globally in iotests.py.
Suggested-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-3-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We are going to support IMGOPTS environment variable like in bash
tests. Corresponding global variable in iotests.py should be called
imgopts. So to not interfere with function argument, rename it in
advance.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-2-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
This test assumes that mirror flushes the source when entering the READY
state, and that the format level will pass that flush on to the protocol
level (where we intercept it with blkdebug).
However, apparently that does not happen when using a VMDK image with
zeroed_grain=on, which actually is the default set by testenv.py. Right
now, Python tests ignore IMGOPTS, though, so this has no effect; but
Vladimir has a series that will change this, so we need to fix this test
before that series lands.
We can fix it by writing data to the source before we start the mirror
job; apparently that makes the (VMDK) format layer change its mind and
pass on the pre-READY flush to the protocol level, so the test passes
again. (I presume, without any data written, mirror just does a 64M
zero write on the target, which VMDK with zeroed_grain=on basically just
ignores.)
Without this, we do not get a flush, and so blkdebug only sees a single
flush at the end of the job instead of two, and therefore does not
inject an error, which makes the block job complete instead of raising
an error.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223165308.103793-1-hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
The lsi53c895a SCSI adaptor might not be enabled in each and every
x86 QEMU binary, e.g. it's disabled in the RHEL/CentOS build.
Thus let's add a check to the 051 test so that it does not fail if
this device is not available.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211206143404.247032-1-thuth@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Add a new test to verify that want_zero=false block-status calls do not
pollute the block-status cache for want_zero=true calls.
We check want_zero=true calls and their results using `qemu-img map`
(over NBD), and want_zero=false calls also using `qemu-img map` over
NBD, but using the qemu:allocation-depth context.
(This test case cannot be integrated into nbd-qemu-allocation, because
that is a qcow2 test, and this is a raw test.)
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220118170000.49423-3-hreitz@redhat.com>
Reviewed-by: Nir Soffer <nsoffer@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Let "meson test" take care of showing the results of the individual tests,
consistently with other output from "make check V=1".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
"meson test" can be asked to run tests verbosely; this makes it usable
also for qemu-iotests's own harness, and it lets "make check-block"
reuse mtest2make.py's infrastructure to find and build test dependencies.
Adjust check-block.sh to use the standard exit code that reports a test
as skipped. Alternatively, in the future we could make it produce TAP
output, which is consistent with all other "make check" tests.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A lot of Optional[] types doesn't make code beautiful.
test_field_width defaults to 8, but that is never used in the code.
More over, if we want some default behavior for single call of
test_run(), it should just print the whole test name, not limiting or
expanding its width, so 8 is bad default.
So, just drop the default as unused for now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211210201450.101576-1-vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
First, this permission never protected a node from being changed, as
generic child-replacing functions don't check it.
Second, it's a strange thing: it presents a permission of parent node
to change its child. But generally, children are replaced by different
mechanisms, like jobs or qmp commands, not by nodes.
Graph-mod permission is hard to understand. All other permissions
describe operations which done by parent node on its child: read,
write, resize. Graph modification operations are something completely
different.
The only place where BLK_PERM_GRAPH_MOD is used as "perm" (not shared
perm) is mirror_start_job, for s->target. Still modern code should use
bdrv_freeze_backing_chain() to protect from graph modification, if we
don't do it somewhere it may be considered as a bug. So, it's a bit
risky to drop GRAPH_MOD, and analyzing of possible loss of protection
is hard. But one day we should do it, let's do it now.
One more bit of information is that locking the corresponding byte in
file-posix doesn't make sense at all.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210902093754.2352-1-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Consider the case when the whole buffer is zero and end is unaligned.
If i <= tail, we return 1 and do one unaligned WRITE, RMW happens.
If i > tail, we do on aligned WRITE_ZERO (or skip if target is zeroed)
and again one unaligned WRITE, RMW happens.
Let's do better: don't fragment the whole-zero buffer and report it as
ZERO: in case of zeroed target we just do nothing and avoid RMW. If
target is not zeroes, one unaligned WRITE_ZERO should not be much worse
than one unaligned WRITE.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211217164654.1184218-3-vsementsov@virtuozzo.com>
Tested-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This demonstrates what happens when the block status changes in
sub-min_sparse granularity, but all of the parts are zeroed out. The
alignment logic in is_allocated_sectors() prevents that the target image
remains fully sparse as expected, but turns it into a data cluster of
explicit zeros.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211217164654.1184218-2-vsementsov@virtuozzo.com>
Tested-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With CAP_DAC_OVERRIDE (which e.g. root generally has), permission checks
will be bypassed when opening files.
308 in one instance tries to open a read-only file (FUSE export) with
qemu-io as read/write, and expects this to fail. However, when running
it as root, opening will succeed (thanks to CAP_DAC_OVERRIDE) and only
the actual write operation will fail.
Note this as "Case not run", but have the test pass in either case.
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Fixes: 2c7dd057aa
("export/fuse: Pass default_permissions for mount")
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220103120014.13061-1-hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test the following scenario:
- Simple stream block in two-layer backing chain (base and top)
- The job is drained via blk_drain(), then an error occurs while the job
settles the ongoing request
- And so the job completes while in blk_drain()
This was reported as a segfault, but is fixed by "block-backend: prevent
dangling BDS pointers across aio_poll()".
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2036178
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220111153613.25453-3-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's unused now (except for permission handling)[*]. The only reasonable
user of it was block-stream job, recently updated to use own blk. And
other block jobs prefer to use own source node related objects.
So, the arguments of dropping the field are:
- block jobs prefer not to use it
- block jobs usually has more then one node to operate on, and better
to operate symmetrically (for example has both source and target
blk's in specific block-job state structure)
*: BlockJob.blk is used to keep some permissions. We simply move
permissions to block-job child created in block_job_create() together
with blk.
In mirror, we just should not care anymore about restoring state of
blk. Most probably this code could be dropped long ago, after dropping
bs->job pointer. Now it finally goes away together with BlockJob.blk
itself.
iotest 141 output is updated, as "bdrv_has_blk(bs)" check in
qmp_blockdev_del() doesn't fail (we don't have blk now). Still, new
error message looks even better.
In iotest 283 we need to add a job id, otherwise "Invalid job ID"
happens now earlier than permission check (as permissions moved from
blk to block-job node).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Nikita Lapshin <nikita.lapshin@virtuozzo.com>
v2: simple fix for mypy and pylint complains on patch 04
-----BEGIN PGP SIGNATURE-----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=YH3P
-----END PGP SIGNATURE-----
Merge tag 'pull-nbd-2021-12-22-v2' of https://src.openvz.org/scm/~vsementsov/qemu into staging
nbd: reconnect-on-open feature
v2: simple fix for mypy and pylint complains on patch 04
# gpg: Signature made Thu 23 Dec 2021 12:45:20 AM PST
# gpg: using RSA key 8B9C26CDB2FD147C880E86A1561F24C1F19F79FB
# gpg: Good signature from "Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8B9C 26CD B2FD 147C 880E 86A1 561F 24C1 F19F 79FB
* tag 'pull-nbd-2021-12-22-v2' of https://src.openvz.org/scm/~vsementsov/qemu:
iotests: add nbd-reconnect-on-open test
iotests.py: add qemu_io_popen()
iotests.py: add and use qemu_io_wrap_args()
iotests.py: add qemu_tool_popen()
nbd/client-connection: improve error message of cancelled attempt
nbd/client-connection: nbd_co_establish_connection(): return real error
nbd: allow reconnect on open, with corresponding new options
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add qemu-io Popen constructor wrapper. To be used in the following new
test commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Nikita Lapshin <nikita.lapshin@virtuozzo.com>
For qemu_io* functions support --image-opts argument, which conflicts
with -f argument from qemu_io_args.
For QemuIoInteractive use new wrapper as well, which allows relying on
default format.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Nikita Lapshin <nikita.lapshin@virtuozzo.com>
Split qemu_tool_popen() from qemu_tool_pipe_and_status() to be used
separately.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Nikita Lapshin <nikita.lapshin@virtuozzo.com>
Add -j <JOBS> parameter, to run tests in several jobs simultaneously.
For realization - simply utilize multiprocessing.Pool class.
Notes:
1. Of course, tests can't run simultaneously in same TEST_DIR. So,
use subdirectories TEST_DIR/testname/ and SOCK_DIR/testname/
instead of simply TEST_DIR and SOCK_DIR
2. multiprocessing.Pool.starmap function doesn't support passing
context managers, so we can't simply pass "self". Happily, we need
self only for read-only access, and it just works if it is defined
in global space. So, add a temporary link TestRunner.shared_self
during run_tests().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211203122223.2780098-4-vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Tested-by: John Snow <jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We are going to use do_run_test() in multiprocessing environment, where
we'll not be able to change original runner object.
Happily, the only thing we change is that last_elapsed and it's simple
to do it in run_tests() instead. All other accesses to self in
do_runt_test() and in run_test() are read-only.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211203122223.2780098-3-vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Tested-by: John Snow <jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We are going to modify these methods and will add more documentation in
further commit. As a preparation add basic documentation.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211203122223.2780098-2-vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Tested-by: John Snow <jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Whenever qemu-img or qemu-io report that some cipher is unsupported,
skip the whole test, because that is probably because qemu has been
configured with the gnutls crypto backend.
We could taylor the algorithm list to what gnutls supports, but this is
a test that is run rather rarely anyway (because it requires
password-less sudo), and so it seems better and easier to skip it. When
this test is intentionally run to check LUKS compatibility, it seems
better not to limit the algorithms but keep the list extensive.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211117151707.52549-3-hreitz@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Our gnutls crypto backend (which is the default as of 8bd0931f6)
supports neither twofish-128 nor the CTR mode. CBC and aes-128 are
supported by all of our backends (as far as I can tell), so use
aes-128-cbc in our iotests.
(We could also use e.g. aes-256-cbc, but the different key sizes would
lead to different key slot offsets and so change the reference output
more, which is why I went with aes-128.)
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211117151707.52549-2-hreitz@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
At the end of a reopen, we already call bdrv_refresh_limits(), which
should update bs->request_alignment according to the new file
descriptor. However, raw_probe_alignment() relies on s->needs_alignment
and just uses 1 if it isn't set. We neglected to update this field, so
starting with cache=writeback and then reopening with cache=none means
that we get an incorrect bs->request_alignment == 1 and unaligned
requests fail instead of being automatically aligned.
Fix this by recalculating s->needs_alignment in raw_refresh_limits()
before calling raw_probe_alignment().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20211104113109.56336-1-kwolf@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20211115145409.176785-13-kwolf@redhat.com>
[hreitz: Fix iotest 142 for block sizes greater than 512 by operating on
a file with a size of 1 MB]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211116101431.105252-1-hreitz@redhat.com>
