The printscreen/sysrq and pause/break keys currently don't work for guests
using -usbdevice keyboard when accessed through vnc with a gtk-vnc based
client.
The reason for this is a mismatch between gtk-vnc and qemu in how these keys
should be mapped to XT keycodes.
On the original IBM XT these keys behaved differently than other keys.
Quoting from https://www.win.tue.nl/~aeb/linux/kbd/scancodes-1.html:
The keys PrtSc/SysRq and Pause/Break are special. The former produces
scancode e0 2a e0 37 when no modifier key is pressed simultaneously, e0 37
together with Shift or Ctrl, but 54 together with (left or right) Alt. (And
one gets the expected sequences upon release. But see below.) The latter
produces scancode sequence e1 1d 45 e1 9d c5 when pressed (without modifier)
and nothing at all upon release. However, together with (left or right)
Ctrl, one gets e0 46 e0 c6, and again nothing at release. It does not
repeat.
Gtk-vnc supports the 'QEMU Extended Key Event Message' RFB extension to send
raw XT keycodes directly to qemu, but the specification doesn't explicitly
specify how to map such long/complicated keycode sequences. From the spec
(https://github.com/rfbproto/rfbproto/blob/master/rfbproto.rst#qemu-extended-key-event-message)
The keycode is the XT keycode that produced the keysym. An XT keycode is an
XT make scancode sequence encoded to fit in a single U32 quantity. Single
byte XT scancodes with a byte value less than 0x7f are encoded as is.
2-byte XT scancodes whose first byte is 0xe0 and second byte is less than
0x7f are encoded with the high bit of the first byte set
hid.c currently expects the keycode sequence with shift/ctl for sysrq (e0 37
-> 0xb7 in RFB), whereas gtk-vnc uses the sequence with alt (0x54).
Likewise, hid.c expects the code without modifiers (e1 1d 45 -> 0xc5 in
RFB), whereas gtk-vnc sends the keycode sequence with ctrl for pause (e0 46
-> 0xc6 in RFB).
See keymaps.cvs in gtk-vnc for the mapping used:
https://git.gnome.org/browse/gtk-vnc/tree/src/keymaps.csv#n150
Now, it isn't obvious to me which sequence is really "right", but as the
0x54/0xc6 keycodes are currently unused in hid.c, supporting both seems like
the pragmatic solution to me. The USB HID keyboard boot protocol used by
hid.c doesn't have any other mapping applicable to these keys.
The other guest keyboard interfaces (ps/2, virtio, ..) are not affected,
because they handle these keys differently.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Message-id: 20161028145132.1702-1-peter@korsgaard.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It isn't unusual to happen, for example during reboot when the guest
doesn't reveice events for a while. So better don't flood stderr
with alarming messages. Turn them into tracepoints instead so they
can be enabled in case they are needed for trouble-shooting.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1466675495-28797-1-git-send-email-kraxel@redhat.com
This patch replaces get_ticks_per_sec() calls with the macro
NANOSECONDS_PER_SECOND. Also, as there are no callers, get_ticks_per_sec()
is then removed. This replacement improves the readability and
understandability of code.
For example,
timer_mod(fdctrl->result_timer,
qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + (get_ticks_per_sec() / 50));
NANOSECONDS_PER_SECOND makes it obvious that qemu_clock_get_ns
matches the unit of the expression on the right side of the plus.
Signed-off-by: Rutuja Shah <rutu.shah.26@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Simple unions were carrying a special case that hid their 'data'
QMP member from the resulting C struct, via the hack method
QAPISchemaObjectTypeVariant.simple_union_type(). But by using
the work we started by unboxing flat union and alternate
branches, coupled with the ability to visit the members of an
implicit type, we can now expose the simple union's implicit
type in qapi-types.h:
| struct q_obj_ImageInfoSpecificQCow2_wrapper {
| ImageInfoSpecificQCow2 *data;
| };
|
| struct q_obj_ImageInfoSpecificVmdk_wrapper {
| ImageInfoSpecificVmdk *data;
| };
...
| struct ImageInfoSpecific {
| ImageInfoSpecificKind type;
| union { /* union tag is @type */
| void *data;
|- ImageInfoSpecificQCow2 *qcow2;
|- ImageInfoSpecificVmdk *vmdk;
|+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2;
|+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk;
| } u;
| };
Doing this removes asymmetry between QAPI's QMP side and its
C side (both sides now expose 'data'), and means that the
treatment of a simple union as sugar for a flat union is now
equivalent in both languages (previously the two approaches used
a different layer of dereferencing, where the simple union could
be converted to a flat union with equivalent C layout but
different {} on the wire, or to an equivalent QMP wire form
but with different C representation). Using the implicit type
also lets us get rid of the simple_union_type() hack.
Of course, now all clients of simple unions have to adjust from
using su->u.member to using su->u.member.data; while this touches
a number of files in the tree, some earlier cleanup patches
helped minimize the change to the initialization of a temporary
variable rather than every single member access. The generated
qapi-visit.c code is also affected by the layout change:
|@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member
| }
| switch (obj->type) {
| case IMAGE_INFO_SPECIFIC_KIND_QCOW2:
|- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err);
|+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err);
| break;
| case IMAGE_INFO_SPECIFIC_KIND_VMDK:
|- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err);
|+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err);
| break;
| default:
| abort();
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
An upcoming patch will alter how simple unions, like InputEvent, are
laid out, which will impact all lines of the form 'evt->u.XXX'
(expanding it to the longer 'evt->u.XXX.data'). For better
legibility in that patch, and less need for line wrapping, it's better
to use a temporary variable to reduce the effect of a layout change to
just the variable initializations, rather than every reference within
an InputEvent.
There was one instance in hid.c:hid_pointer_event() where the code
was referring to evt->u.rel inside the case label where evt->u.abs
is the correct name; thankfully, both members of the union have the
same type, so it happened to work, but it is now cleaner.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1457021813-10704-8-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
All lowercase, use-dash instead of CamelCase.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This key is present in international keyboards, between left shift and
the 'Z' key, ant is described in the HID usage tables as "Keyboard
Non-US \ and |": http://www.usb.org/developers/hidpage/Hut1_12v2.pdf
This patch fixes the usb-kbd devices.
Signed-off-by: Daniel Serpell <daniel.serpell@gmail.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-38-git-send-email-peter.maydell@linaro.org
When munging enum values, the fact that we were passing the entire
prefix + value through camel_to_upper() meant that enum values
spelled with CamelCase could be turned into CAMEL_CASE. However,
this provides a potential collision (both OneTwo and One-Two would
munge into ONE_TWO) for enum types, when the same two names are
valid side-by-side as QAPI member names. By changing the generation
of enum constants to always be prefix + '_' + c_name(value,
False).upper(), and ensuring that there are no case collisions (in
the next patches), we no longer have to worry about names that
would be distinct as QAPI members but collide as variant tag names,
without having to think about what munging the heuristics in
camel_to_upper() will actually perform on an enum value.
Making the change will affect enums that did not follow coding
conventions, using 'CamelCase' rather than desired 'lower-case'.
Thankfully, there are only two culprits: InputButton and ErrorClass.
We already tweaked ErrorClass to make it an alias of QapiErrorClass,
where only the alias needs changing rather than the whole tree. So
the bulk of this change is modifying INPUT_BUTTON_WHEEL_UP to the
new INPUT_BUTTON_WHEELUP (and likewise for WHEELDOWN). That part
of this commit may later need reverting if we rename the enum
constants from 'WheelUp' to 'wheel-up' as part of moving
x-input-send-event to a stable interface; but at least we have
documentation bread crumbs in place to remind us (commit 513e7cd),
and it matches the fact that SDL constants are also spelled
SDL_BUTTON_WHEELUP.
Suggested by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-27-git-send-email-eblake@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we guarantee the user doesn't have any enum values
beginning with a single underscore, we can use that for our
own purposes. Renaming ENUM_MAX to ENUM__MAX makes it obvious
that the sentinel is generated.
This patch was mostly generated by applying a temporary patch:
|diff --git a/scripts/qapi.py b/scripts/qapi.py
|index e6d014b..b862ec9 100644
|--- a/scripts/qapi.py
|+++ b/scripts/qapi.py
|@@ -1570,6 +1570,7 @@ const char *const %(c_name)s_lookup[] = {
| max_index = c_enum_const(name, 'MAX', prefix)
| ret += mcgen('''
| [%(max_index)s] = NULL,
|+// %(max_index)s
| };
| ''',
| max_index=max_index)
then running:
$ cat qapi-{types,event}.c tests/test-qapi-types.c |
sed -n 's,^// \(.*\)MAX,s|\1MAX|\1_MAX|g,p' > list
$ git grep -l _MAX | xargs sed -i -f list
The only things not generated are the changes in scripts/qapi.py.
Rejecting enum members named 'MAX' is now useless, and will be dropped
in the next patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-23-git-send-email-eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
[Rebased to current master, commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We have two issues with our qapi union layout:
1) Even though the QMP wire format spells the tag 'type', the
C code spells it 'kind', requiring some hacks in the generator.
2) The C struct uses an anonymous union, which places all tag
values in the same namespace as all non-variant members. This
leads to spurious collisions if a tag value matches a non-variant
member's name.
Make the conversion to the new layout for input-related code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1445898903-12082-20-git-send-email-eblake@redhat.com>
[Commit message tweaked slightly]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Coverity thinks the fallthroughs are smelly. They are correct, but
everything else in this function is like "wut?".
Refer explicitly to bits 8 and 9 of hs->kbd.modifiers instead of
shifting right first and using (1 << 7). Document what the scancode
is when hid_code is 0xe0. And add plenty of comments.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When ever USB keyboard is used, e.g. '-usbdevice keyboard' pressing
caps lock key send 0x32 hid code, which is treated as backslash.
Instead it should be 0x39 code. This affects sending uppercase keys,
as they typed whith caps lock active.
While on x86 this can be workarounded by using ps/2 protocol. On
Power it is crusial as we don't have anything else than USB.
This is fixes guest automation tasts over vnc.
Signed-off-by: Dinar Valeev <dvaleev@suse.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Guest mouse pointer was jumpy, when moving host mouse in the vertical direction (see bug #1327800).
Signed-off-by: Christian Burger <christian@krikkel.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Minimal patch to get the switchover done. We continue processing ps/2
scancodes for now as they are part of the live migration stream. Fixing
that, then mapping directly from QKeyValue to HID keycodes is left as
excercise for another day.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This is an autogenerated patch using scripts/switch-timer-api.
Switch the entire code base to using the new timer API.
Note this patch may introduce some line length issues.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a linked list of keyboard handlers. Added handlers will go
to the head of the list. Removed handlers will be zapped from
the list. The head of the list will be used for events.
This fixes the keyboard-dead-after-usb-kbd-unplug issue, key events
will be re-routed to the ps/2 kbd instead of being discarded.
[ v2: fix cut+paste bug found my Markus ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1366798118-3248-3-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
