Now that the implementation of subclusters is complete we can finally
add the necessary options to create and read images with this feature,
which we call "extended L2 entries".
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <6476caaa73216bd05b7bb2d504a20415e1665176.1594396418.git.berto@igalia.com>
[mreitz: %s/5\.1/5.2/; fixed 302's and 303's reference output]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Some qcow2 create options can't be used for amend.
Remove them from the qcow2 create options and add generic logic to detect
such options in qemu-img
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[mreitz: Dropped some iotests reference output hunks that became
unnecessary thanks to
"iotests: Make _filter_img_create more active"]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200625125548.870061-12-mreitz@redhat.com>
The patch adds some preparation parts for incompatible compression type
feature to qcow2 allowing the use different compression methods for
image clusters (de)compressing.
It is implied that the compression type is set on the image creation and
can be changed only later by image conversion, thus compression type
defines the only compression algorithm used for the image, and thus,
for all image clusters.
The goal of the feature is to add support of other compression methods
to qcow2. For example, ZSTD which is more effective on compression than ZLIB.
The default compression is ZLIB. Images created with ZLIB compression type
are backward compatible with older qemu versions.
Adding of the compression type breaks a number of tests because now the
compression type is reported on image creation and there are some changes
in the qcow2 header in size and offsets.
The tests are fixed in the following ways:
* filter out compression_type for many tests
* fix header size, feature table size and backing file offset
affected tests: 031, 036, 061, 080
header_size +=8: 1 byte compression type
7 bytes padding
feature_table += 48: incompatible feature compression type
backing_file_offset += 56 (8 + 48 -> header_change + feature_table_change)
* add "compression type" for test output matching when it isn't filtered
affected tests: 049, 060, 061, 065, 082, 085, 144, 182, 185, 198, 206,
242, 255, 274, 280
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
QAPI part:
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200507082521.29210-2-dplotnikov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We generally include relevant HMP input in .out files, by virtue of
the fact that HMP echoes its input. But QMP does not, so we have to
explicitly inject it in the output stream (appropriately filtered to
keep the tests passing), in order to make it easier to read .out files
to see what behavior is being tested (especially true where the output
file is a sequence of {'return': {}}).
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191114213415.23499-4-eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
drv_co_block_status digs bs->file for additional, more accurate search
for hole inside region, reported as DATA by bs since 5daa74a6eb.
This accuracy is not free: assume we have qcow2 disk. Actually, qcow2
knows, where are holes and where is data. But every block_status
request calls lseek additionally. Assume a big disk, full of
data, in any iterative copying block job (or img convert) we'll call
lseek(HOLE) on every iteration, and each of these lseeks will have to
iterate through all metadata up to the end of file. It's obviously
ineffective behavior. And for many scenarios we don't need this lseek
at all.
However, lseek is needed when we have metadata-preallocated image.
So, let's detect metadata-preallocation case and don't dig qcow2's
protocol file in other cases.
The idea is to compare allocation size in POV of filesystem with
allocations size in POV of Qcow2 (by refcounts). If allocation in fs is
significantly lower, consider it as metadata-preallocation case.
102 iotest changed, as our detector can't detect shrinked file as
metadata-preallocation, which don't seem to be wrong, as with metadata
preallocation we always have valid file length.
Two other iotests have a slight change in their QMP output sequence:
Active 'block-commit' returns earlier because the job coroutine yields
earlier on a blocking operation. This operation is loading the refcount
blocks in qcow2_detect_metadata_preallocation().
Suggested-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a QMP event that is emitted whenever a job transitions from
one status to another.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Historically the qcow & qcow2 image formats supported a property
"encryption=on" to enable their built-in AES encryption. We'll
soon be supporting LUKS for qcow2, so need a more general purpose
way to enable encryption, with a choice of formats.
This introduces an "encrypt.format" option, which will later be
joined by a number of other "encrypt.XXX" options. The use of
a "encrypt." prefix instead of "encrypt-" is done to facilitate
mapping to a nested QAPI schema at later date.
e.g. the preferred syntax is now
qemu-img create -f qcow2 -o encrypt.format=aes demo.qcow2
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-8-berrange@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Some guests (win2008 server for example) do a lot of unnecessary
flushing when underlying media has not changed. This adds additional
overhead on host when calling fsync/fdatasync.
This change introduces a write generation scheme in BlockDriverState.
Current write generation is checked against last flushed generation to
avoid unnessesary flushes.
The problem with excessive flushing was found by a performance test
which does parallel directory tree creation (from 2 processes).
Results improved from 0.424 loops/sec to 0.432 loops/sec.
Each loop creates 10^3 directories with 10 files in each.
This affected some blkdebug testcases that were expecting error logs from
failure-injected flushes which are now skipped entirely
(tests 026 071 089).
This also affects the performance of block jobs and thus BLOCK_JOB_READY
events for driver-mirror and active block-commit commands now arrives
faster, before QMP send successfully returns to caller (tests 141 144).
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1468870792-7411-5-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
