Enable SVQ with VIRTIO_NET_F_CTRL_RX_EXTRA feature.
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <15ecc49975f9b8d1316ed4296879564a18abf31e.1688797728.git.yin31149@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch refactors vhost_vdpa_net_load_rx() to
restore the packet receive filtering state in relation to
VIRTIO_NET_F_CTRL_RX_EXTRA feature at device's startup.
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Message-Id: <abddc477a476f756de6e3d24c0e9f7b21c99a4c1.1688797728.git.yin31149@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Enable SVQ with VIRTIO_NET_F_CTRL_RX feature.
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <5d6173a6d7c4c514c98362b404c019f52d73b06c.1688743107.git.yin31149@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Due to the size limitation of the out buffer sent to the vdpa device,
which is determined by vhost_vdpa_net_cvq_cmd_len(), excessive CVQ
command is truncated in QEMU. As a result, the vdpa device rejects
this flawd CVQ command.
However, the problem is that, the VIRTIO_NET_CTRL_MAC_TABLE_SET
CVQ command has a variable length, which may exceed
vhost_vdpa_net_cvq_cmd_len() if the guest sets more than
`MAC_TABLE_ENTRIES` MAC addresses for the filter table.
This patch solves this problem by following steps:
* Increase the out buffer size to vhost_vdpa_net_cvq_cmd_page_len(),
which represents the size of the buffer that is allocated and mmaped.
This ensures that everything works correctly as long as the guest
sets fewer than `(vhost_vdpa_net_cvq_cmd_page_len() -
sizeof(struct virtio_net_ctrl_hdr)
- 2 * sizeof(struct virtio_net_ctrl_mac)) / ETH_ALEN` MAC addresses.
Considering the highly unlikely scenario for the guest setting
more than that number of MAC addresses for the filter table, this
should work fine for the majority of cases.
* If the CVQ command exceeds vhost_vdpa_net_cvq_cmd_page_len(),
instead of directly sending this CVQ command, QEMU should send
a VIRTIO_NET_CTRL_RX_PROMISC CVQ command to vdpa device. Addtionally,
a fake VIRTIO_NET_CTRL_MAC_TABLE_SET command including
(`MAC_TABLE_ENTRIES` + 1) non-multicast MAC addresses and
(`MAC_TABLE_ENTRIES` + 1) multicast MAC addresses should be provided
to the device model.
By doing so, the vdpa device turns promiscuous mode on, aligning
with the VirtIO standard. The device model marks
`n->mac_table.uni_overflow` and `n->mac_table.multi_overflow`,
which aligns with the state of the vdpa device.
Note that the bug cannot be triggered at the moment, since
VIRTIO_NET_F_CTRL_RX feature is not enabled for SVQ.
Fixes: 7a7f87e94c ("vdpa: Move command buffers map to start of net device")
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Message-Id: <267e15e4eed2d7aeb9887f193da99a13d22a2f1d.1688743107.git.yin31149@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We can access the CVQ header through `struct virtio_net_ctrl_hdr`,
instead of accessing it through a `uint8_t` pointer,
which improves the code's readability and maintainability.
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Message-Id: <cd522e06a4371e9d6b8a1c1a86f90a92401d56e8.1688743107.git.yin31149@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduces vhost_vdpa_net_load_rx_mode()
and vhost_vdpa_net_load_rx() to restore the packet
receive filtering state in relation to
VIRTIO_NET_F_CTRL_RX feature at device's startup.
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Message-Id: <804cedac93e19ba3b810d52b274ca5ec11469f09.1688743107.git.yin31149@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch refactors vhost_vdpa_net_load_mac() to
restore the MAC address filtering state at device's startup.
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Message-Id: <4b9550c14bc8c98c8f48e04dbf3d3ac41489d3fd.1688743107.git.yin31149@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to VirtIO standard, "The driver MUST follow
the VIRTIO_NET_CTRL_MAC_TABLE_SET command by a le32 number,
followed by that number of non-multicast MAC addresses,
followed by another le32 number, followed by that number
of multicast addresses."
Considering that these data is not stored in contiguous memory,
this patch refactors vhost_vdpa_net_load_cmd() to accept
scattered data, eliminating the need for an addtional data copy or
packing the data into s->cvq_cmd_out_buffer outside of
vhost_vdpa_net_load_cmd().
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Message-Id: <3482cc50eebd13db4140b8b5dec9d0cc25b20b1b.1688743107.git.yin31149@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
QEMU uses vhost_handle_guest_kick() to forward guest's available
buffers to the vdpa device in SVQ avail ring.
In vhost_handle_guest_kick(), a `g_autofree` `elem` is used to
iterate through the available VirtQueueElements. This `elem` is
then passed to `svq->ops->avail_handler`, specifically to the
vhost_vdpa_net_handle_ctrl_avail(). If this handler fails to
process the CVQ command, vhost_handle_guest_kick() regains
ownership of the `elem`, and either frees it or requeues it.
Yet the problem is that, vhost_vdpa_net_handle_ctrl_avail()
mistakenly frees the `elem`, even if it fails to forward the
CVQ command to vdpa device. This can result in a use-after-free
for the `elem` in vhost_handle_guest_kick().
This patch solves this problem by refactoring
vhost_vdpa_net_handle_ctrl_avail() to only freeing the `elem` if
it owns it.
Fixes: bd907ae4b0 ("vdpa: manual forward CVQ buffers")
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Message-Id: <e3f2d7db477734afe5c6a5ab3fa8b8317514ea34.1688746840.git.yin31149@gmail.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to VirtIO standard, "The class, command and
command-specific-data are set by the driver,
and the device sets the ack byte.
There is little it can do except issue a diagnostic
if ack is not VIRTIO_NET_OK."
Therefore, QEMU should stop sending the queued SVQ commands and
cancel the device startup if the device's ack is not VIRTIO_NET_OK.
Yet the problem is that, vhost_vdpa_net_load_offloads() returns 1 based on
`*s->status != VIRTIO_NET_OK` when the device's ack is VIRTIO_NET_ERR.
As a result, net->nc->info->load() also returns 1, this makes
vhost_net_start_one() incorrectly assume the device state is
successfully loaded by vhost_vdpa_net_load() and return 0, instead of
goto `fail` label to cancel the device startup, as vhost_net_start_one()
only cancels the device startup when net->nc->info->load() returns a
negative value.
This patch fixes this problem by returning -EIO when the device's
ack is not VIRTIO_NET_OK.
Fixes: 0b58d3686a ("vdpa: Add vhost_vdpa_net_load_offloads()")
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <b0396b80e96322b86f1a0b10c098fc1edd947d72.1688438055.git.yin31149@gmail.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to VirtIO standard, "The class, command and
command-specific-data are set by the driver,
and the device sets the ack byte.
There is little it can do except issue a diagnostic
if ack is not VIRTIO_NET_OK."
Therefore, QEMU should stop sending the queued SVQ commands and
cancel the device startup if the device's ack is not VIRTIO_NET_OK.
Yet the problem is that, vhost_vdpa_net_load_mq() returns 1 based on
`*s->status != VIRTIO_NET_OK` when the device's ack is VIRTIO_NET_ERR.
As a result, net->nc->info->load() also returns 1, this makes
vhost_net_start_one() incorrectly assume the device state is
successfully loaded by vhost_vdpa_net_load() and return 0, instead of
goto `fail` label to cancel the device startup, as vhost_net_start_one()
only cancels the device startup when net->nc->info->load() returns a
negative value.
This patch fixes this problem by returning -EIO when the device's
ack is not VIRTIO_NET_OK.
Fixes: f64c7cda69 ("vdpa: Add vhost_vdpa_net_load_mq")
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <ec515ebb0b4f56368751b9e318e245a5d994fa72.1688438055.git.yin31149@gmail.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to VirtIO standard, "The class, command and
command-specific-data are set by the driver,
and the device sets the ack byte.
There is little it can do except issue a diagnostic
if ack is not VIRTIO_NET_OK."
Therefore, QEMU should stop sending the queued SVQ commands and
cancel the device startup if the device's ack is not VIRTIO_NET_OK.
Yet the problem is that, vhost_vdpa_net_load_mac() returns 1 based on
`*s->status != VIRTIO_NET_OK` when the device's ack is VIRTIO_NET_ERR.
As a result, net->nc->info->load() also returns 1, this makes
vhost_net_start_one() incorrectly assume the device state is
successfully loaded by vhost_vdpa_net_load() and return 0, instead of
goto `fail` label to cancel the device startup, as vhost_net_start_one()
only cancels the device startup when net->nc->info->load() returns a
negative value.
This patch fixes this problem by returning -EIO when the device's
ack is not VIRTIO_NET_OK.
Fixes: f73c0c43ac ("vdpa: extract vhost_vdpa_net_load_mac from vhost_vdpa_net_load")
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <a21731518644abbd0c495c5b7960527c5911f80d.1688438055.git.yin31149@gmail.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch sorts the vdpa_feature_bits array
alphabetically in ascending order to avoid future duplicates.
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This entry was duplicated on referenced commit. Removing it.
Fixes: 402378407d ("vhost-vdpa: multiqueue support")
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When a peer nic is still attached to the vdpa backend, it is too early to free
up the vhost-net and vdpa structures. If these structures are freed here, then
QEMU crashes when the guest is being shut down. The following call chain
would result in an assertion failure since the pointer returned from
vhost_vdpa_get_vhost_net() would be NULL:
do_vm_stop() -> vm_state_notify() -> virtio_set_status() ->
virtio_net_vhost_status() -> get_vhost_net().
Therefore, we defer freeing up the structures until at guest shutdown
time when qemu_cleanup() calls net_cleanup() which then calls
qemu_del_net_client() which would eventually call vhost_vdpa_cleanup()
again to free up the structures. This time, the loop in net_cleanup()
ensures that vhost_vdpa_cleanup() will be called one last time when
all the peer nics are detached and freed.
All unit tests pass with this change.
CC: imammedo@redhat.com
CC: jusual@redhat.com
CC: mst@redhat.com
Fixes: CVE-2023-3301
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2128929
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20230619065209.442185-1-anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Bug introducing when refactoring. Otherway, the guest never received
the used buffer.
Fixes: be4278b65f ("vdpa: extract vhost_vdpa_net_cvq_add from vhost_vdpa_net_handle_ctrl_avail")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230602173451.1917999-1-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
QEMU does not emulate it so it must be disabled as long as the backend
does not support it.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230602173328.1917385-1-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Enable SVQ with VIRTIO_NET_F_CTRL_GUEST_OFFLOADS feature.
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <778d642ecae6deed8a218b0e6232e4d7bb96b439.1685704856.git.yin31149@gmail.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Tested-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduces vhost_vdpa_net_load_offloads() to
restore offloads state at device's startup.
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Message-Id: <7e2b5cad9c48c917df53d80dec27dbfeb513e1a3.1685704856.git.yin31149@gmail.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Tested-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We can use virtio_vdev_has_feature() instead of manually
accessing the features.
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <ff838d30206209fd865511b16ffb34cc0d5e8d8f.1685704856.git.yin31149@gmail.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Tested-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The vdpa devices that use va addresses neeeds these maps shared.
Otherwise, vhost_vdpa checks will refuse to accept the maps.
The mmap call will always return a page aligned address, so removing the
qemu_memalign call. Keeping the ROUND_UP for the size as we still need
to DMA-map them in full.
Not applying fixes tag as it never worked with va devices.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230602143854.1879091-4-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We need to call it from resource cleanup context, as munmap needs the
size of the mappings.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230602143854.1879091-3-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It was a mistake to forbid in all cases, as SVQ is already able to send
all the CVQ messages before start forwarding data vqs. It actually
caused a regression, making impossible to migrate device previously
migratable.
Fixes: 36e4647247 ("vdpa: add vhost_vdpa_net_valid_svq_features")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230602143854.1879091-2-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Evaluating it at start time instead of initialization time may make the
guest capable of dynamically adding or removing migration blockers.
Also, moving to initialization reduces the number of ioctls in the
migration, reducing failure possibilities.
As a drawback we need to check for CVQ isolation twice: one time with no
MQ negotiated and another one acking it, as long as the device supports
it. This is because Vring ASID / group management is based on vq
indexes, but we don't know the index of CVQ before negotiating MQ.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230526153143.470745-3-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
We need to tell in the caller, as some errors are expected in a normal
workflow. In particular, parent drivers in recent kernels with
VHOST_BACKEND_F_IOTLB_ASID may not support vring groups. In that case,
-ENOTSUP is returned.
This is the case of vp_vdpa in Linux 6.2.
Next patches in this series will use that information to know if it must
abort or not. Also, next patches return properly an errp instead of
printing with error_report.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230526153143.470745-2-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There is no reason to block it as it has nothing to do with the vrings.
All the support of the feature comes via config space.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Suggested-by: Alvaro Karsz <alvaro.karsz@solid-run.com>
Message-Id: <20230307170018.260557-1-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since some actions move to the start function instead of init, the
device features may not be the parent vdpa device's, but the one
returned by vhost backend. If transition to SVQ is supported, the vhost
backend will return _F_LOG_ALL to signal the device is migratable.
Add VHOST_F_LOG_ALL. HW dirty page tracking can be added on top of this
change if the device supports it in the future.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230303172445.1089785-14-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A vdpa net device must initialize with SVQ in order to be migratable at
this moment, and initialization code verifies some conditions. If the
device is not initialized with the x-svq parameter, it will not expose
_F_LOG so the vhost subsystem will block VM migration from its
initialization.
Next patches change this, so we need to verify migration conditions
differently.
QEMU only supports a subset of net features in SVQ, and it cannot
migrate state that cannot track or restore in the destination. Add a
migration blocker if the device offers an unsupported feature.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230303172445.1089785-12-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Devices with CVQ need to migrate state beyond vq state. Leaving this to
future series.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230303172445.1089785-11-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows net to restart the device backend to configure SVQ on it.
Ideally, these changes should not be net specific and they could be done
in:
* vhost_vdpa_set_features (with VHOST_F_LOG_ALL)
* vhost_vdpa_set_vring_addr (with .enable_log)
* vhost_vdpa_set_log_base.
However, the vdpa net backend is the one with enough knowledge to
configure everything because of some reasons:
* Queues might need to be shadowed or not depending on its kind (control
vs data).
* Queues need to share the same map translations (iova tree).
Also, there are other problems that may have solutions but complicates
the implementation at this stage:
* We're basically duplicating vhost_dev_start and vhost_dev_stop, and
they could go out of sync. If we want to reuse them, we need a way to
skip some function calls to avoid recursiveness (either vhost_ops ->
vhost_set_features, vhost_set_vring_addr, ...).
* We need to traverse all vhost_dev of a given net device twice: one to
stop and get the vq state and another one after the reset to
configure properties like address, fd, etc.
Because of that it is cleaner to restart the whole net backend and
configure again as expected, similar to how vhost-kernel moves between
userspace and passthrough.
If more kinds of devices need dynamic switching to SVQ we can:
* Create a callback struct like VhostOps and move most of the code
there. VhostOps cannot be reused since all vdpa backend share them,
and to personalize just for networking would be too heavy.
* Add a parent struct or link all the vhost_vdpa or vhost_dev structs so
we can traverse them.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230303172445.1089785-9-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Only create iova_tree if and when it is needed.
The cleanup keeps being responsible for the last VQ but this change
allows it to merge both cleanup functions.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230303172445.1089785-2-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VHOST_BACKEND_F_IOTLB_ASID is the feature bit, not the bitmask. Since
the device under test also provided VHOST_BACKEND_F_IOTLB_MSG_V2 and
VHOST_BACKEND_F_IOTLB_BATCH, this went unnoticed.
Fixes: c1a1008685 ("vdpa: always start CVQ in SVQ mode if possible")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We should stop if the GET_IOVA_RANGE ioctl failed.
Signed-off-by: Longpeng <longpeng2@huawei.com>
Message-Id: <20221224114848.3062-3-longpeng2@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
In commit a585fad26b ("vdpa: request iova_range only once") we remove
GET_IOVA_RANGE form vhost_vdpa_init, the generic vdpa device will start
without iova_range populated, so the device won't work. Let's call
GET_IOVA_RANGE ioctl explicitly.
Fixes: a585fad26b ("vdpa: request iova_range only once")
Signed-off-by: Longpeng <longpeng2@huawei.com>
Message-Id: <20221224114848.3062-2-longpeng2@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
So qemu emulates it even in case the device does not support it.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221221115015.1400889-5-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since this capability is emulated by qemu shadowed CVQ cannot forward it
to the device. Process all that command within qemu.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20221221115015.1400889-4-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Isolate control virtqueue in its own group, allowing to intercept control
commands but letting dataplane run totally passthrough to the guest.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20221215113144.322011-13-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
The memory listener that thells the device how to convert GPA to qemu's
va is registered against CVQ vhost_vdpa. memory listener translations
are always ASID 0, CVQ ones are ASID 1 if supported.
Let's tell the listener if it needs to register them on iova tree or
not.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221215113144.322011-12-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CVQ can be shadowed two ways:
- Device has x-svq=on parameter (current way)
- The device can isolate CVQ in its own vq group
QEMU needs to check for the second condition dynamically, because CVQ
index is not known before the driver ack the features. Since this is
dynamic, the CVQ isolation could vary with different conditions, making
it possible to go from "not isolated group" to "isolated".
Saving the cmdline parameter in an extra field so we never disable CVQ
SVQ in case the device was started with x-svq cmdline.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221215113144.322011-11-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
So the caller can choose which ASID is destined.
No need to update the batch functions as they will always be called from
memory listener updates at the moment. Memory listener updates will
always update ASID 0, as it's the passthrough ASID.
All vhost devices's ASID are 0 at this moment.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221215113144.322011-10-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The next patches will start control SVQ if possible. However, we don't
know if that will be possible at qemu boot anymore.
Since the moved checks will be already evaluated at net/ to know if it
is ok to shadow CVQ, move them.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221215113144.322011-8-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently iova range is requested once per queue pair in the case of
net. Reduce the number of ioctls asking it once at initialization and
reusing that value for each vhost_vdpa.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20221215113144.322011-7-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasonwang@redhat.com>
It will be reused at vdpa device start so let's extract in its own
function.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20221215113144.322011-6-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The has_FOO for pointer-valued FOO are redundant, except for arrays.
They are also a nuisance to work with. Recent commit "qapi: Start to
elide redundant has_FOO in generated C" provided the means to elide
them step by step. This is the step for qapi/net.json.
Said commit explains the transformation in more detail. The invariant
violations mentioned there do not occur here.
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221104160712.3005652-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[Fixes for MacOS squashed in]
Commit 69e1c14aa2 ("virtio: core: vq reset feature negotation support")
enabled VIRTIO_F_RING_RESET by default for all virtio devices.
This feature is not currently emulated by QEMU, so for vhost and
vhost-user devices we need to make sure it is supported by the offloaded
device emulation (in-kernel or in another process).
To do this we need to add VIRTIO_F_RING_RESET to the features bitmap
passed to vhost_get_features(). This way it will be masked if the device
does not support it.
This issue was initially discovered with vhost-vsock and vhost-user-vsock,
and then also tested with vhost-user-rng which confirmed the same issue.
They fail when sending features through VHOST_SET_FEATURES ioctl or
VHOST_USER_SET_FEATURES message, since VIRTIO_F_RING_RESET is negotiated
by the guest (Linux >= v6.0), but not supported by the device.
Fixes: 69e1c14aa2 ("virtio: core: vq reset feature negotation support")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1318
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20221121101101.29400-1-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Acked-by: Jason Wang <jasowang@redhat.com>
The citing commit has incorrect code in vhost_vdpa_receive() that returns
zero instead of full packet size to the caller. This renders pending packets
unable to be freed so then get clogged in the tx queue forever. When device
is being reset later on, below assertion failure ensues:
0 0x00007f86d53bb387 in raise () from /lib64/libc.so.6
1 0x00007f86d53bca78 in abort () from /lib64/libc.so.6
2 0x00007f86d53b41a6 in __assert_fail_base () from /lib64/libc.so.6
3 0x00007f86d53b4252 in __assert_fail () from /lib64/libc.so.6
4 0x000055b8f6ff6fcc in virtio_net_reset (vdev=<optimized out>) at /usr/src/debug/qemu/hw/net/virtio-net.c:563
5 0x000055b8f7012fcf in virtio_reset (opaque=0x55b8faf881f0) at /usr/src/debug/qemu/hw/virtio/virtio.c:1993
6 0x000055b8f71f0086 in virtio_bus_reset (bus=bus@entry=0x55b8faf88178) at /usr/src/debug/qemu/hw/virtio/virtio-bus.c:102
7 0x000055b8f71f1620 in virtio_pci_reset (qdev=<optimized out>) at /usr/src/debug/qemu/hw/virtio/virtio-pci.c:1845
8 0x000055b8f6fafc6c in memory_region_write_accessor (mr=<optimized out>, addr=<optimized out>, value=<optimized out>,
size=<optimized out>, shift=<optimized out>, mask=<optimized out>, attrs=...) at /usr/src/debug/qemu/memory.c:483
9 0x000055b8f6fadce9 in access_with_adjusted_size (addr=addr@entry=20, value=value@entry=0x7f867e7fb7e8, size=size@entry=1,
access_size_min=<optimized out>, access_size_max=<optimized out>, access_fn=0x55b8f6fafc20 <memory_region_write_accessor>,
mr=0x55b8faf80a50, attrs=...) at /usr/src/debug/qemu/memory.c:544
10 0x000055b8f6fb1d0b in memory_region_dispatch_write (mr=mr@entry=0x55b8faf80a50, addr=addr@entry=20, data=0, op=<optimized out>,
attrs=attrs@entry=...) at /usr/src/debug/qemu/memory.c:1470
11 0x000055b8f6f62ada in flatview_write_continue (fv=fv@entry=0x7f86ac04cd20, addr=addr@entry=549755813908, attrs=...,
attrs@entry=..., buf=buf@entry=0x7f86d0223028 <Address 0x7f86d0223028 out of bounds>, len=len@entry=1, addr1=20, l=1,
mr=0x55b8faf80a50) at /usr/src/debug/qemu/exec.c:3266
12 0x000055b8f6f62c8f in flatview_write (fv=0x7f86ac04cd20, addr=549755813908, attrs=...,
buf=0x7f86d0223028 <Address 0x7f86d0223028 out of bounds>, len=1) at /usr/src/debug/qemu/exec.c:3306
13 0x000055b8f6f674cb in address_space_write (as=<optimized out>, addr=<optimized out>, attrs=..., buf=<optimized out>,
len=<optimized out>) at /usr/src/debug/qemu/exec.c:3396
14 0x000055b8f6f67575 in address_space_rw (as=<optimized out>, addr=<optimized out>, attrs=..., attrs@entry=...,
buf=buf@entry=0x7f86d0223028 <Address 0x7f86d0223028 out of bounds>, len=<optimized out>, is_write=<optimized out>)
at /usr/src/debug/qemu/exec.c:3406
15 0x000055b8f6fc1cc8 in kvm_cpu_exec (cpu=cpu@entry=0x55b8f9aa0e10) at /usr/src/debug/qemu/accel/kvm/kvm-all.c:2410
16 0x000055b8f6fa5f5e in qemu_kvm_cpu_thread_fn (arg=0x55b8f9aa0e10) at /usr/src/debug/qemu/cpus.c:1318
17 0x000055b8f7336e16 in qemu_thread_start (args=0x55b8f9ac8480) at /usr/src/debug/qemu/util/qemu-thread-posix.c:519
18 0x00007f86d575aea5 in start_thread () from /lib64/libpthread.so.0
19 0x00007f86d5483b2d in clone () from /lib64/libc.so.6
Make vhost_vdpa_receive() return the size passed in as is, so that the
caller qemu_deliver_packet_iov() would eventually propagate it back to
virtio_net_flush_tx() to release pending packets from the async_tx queue.
Which corresponds to the drop path where qemu_sendv_packet_async() returns
non-zero in virtio_net_flush_tx().
Fixes: 846a1e85da ("vdpa: Add dummy receive callback")
Cc: Eugenio Perez Martin <eperezma@redhat.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221108041929.18417-2-jasowang@redhat.com>
Commit 8801ccd050 introduced a compilation failure with clang
version 10.0.0-4ubuntu1:
../../net/vhost-vdpa.c:654:16: error: variable 'vdpa_device_fd' is
used uninitialized whenever 'if' condition is false
[-Werror,-Wsometimes-uninitialized]
} else if (opts->has_vhostfd) {
^~~~~~~~~~~~~~~~~
../../net/vhost-vdpa.c:662:33: note: uninitialized use occurs here
r = vhost_vdpa_get_features(vdpa_device_fd, &features, errp);
^~~~~~~~~~~~~~
../../net/vhost-vdpa.c:654:12: note: remove the 'if' if its condition
is always true
} else if (opts->has_vhostfd) {
^~~~~~~~~~~~~~~~~~~~~~~
../../net/vhost-vdpa.c:629:23: note: initialize the variable
'vdpa_device_fd' to silence this warning
int vdpa_device_fd;
^
= 0
1 error generated.
It's a false positive -- the compiler doesn't manage to figure out
that the error checks further up mean that there's no code path where
vdpa_device_fd isn't initialized. Put another way, the problem is
that we check "if (opts->has_vhostfd)" when in fact that condition
must always be true. A cleverer static analyser would probably warn
that we were checking an always-true condition.
Fix the compilation failure by removing the unnecessary if().
Fixes: 8801ccd050 ("vhost-vdpa: allow passing opened vhostfd to vhost-vdpa")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20221031132901.1277150-1-peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Embed the setting of info_str in a function.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Similar to other vhost backends, vhostfd can be passed to vhost-vdpa
backend as another parameter to instantiate vhost-vdpa net client.
This would benefit the use case where only open file descriptors, as
opposed to raw vhost-vdpa device paths, are accessible from the QEMU
process.
(qemu) netdev_add type=vhost-vdpa,vhostfd=61,id=vhost-vdpa1
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The guest will see undefined behavior if it issue not negotiate
commands, bit it is expected somehow.
Simplify code deleting this check.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This entry was duplicated on referenced commit. Removing it.
Fixes: 402378407d ("vhost-vdpa: multiqueue support")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
So we are sure we can update the device model properly before sending to
the device.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Same way as with the MAC, restore the expected number of queues at
device's start.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Since there may be many commands we need to issue to load the NIC
state, let's split them in individual functions
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This allows to simplify the code. Rename to status while we're at it.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We can restore the device state in the destination via CVQ now. Remove
the migration blocker.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This is needed so the destination vdpa device see the same state a the
guest set in the source.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
So we can reuse it to inject state messages.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
--
v7:
* Remove double free error
v6:
* Do not assume in buffer sent to the device is sizeof(virtio_net_ctrl_ack)
v5:
* Do not use an artificial !NULL VirtQueueElement
* Use only out size instead of iovec dev_buffers for these functions.
Signed-off-by: Jason Wang <jasowang@redhat.com>
As this series will reuse them to restore the device state at the end of
a migration (or a device start), let's allocate only once at the device
start so we don't duplicate their map and unmap.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Next patches will add a new info callback to restore NIC status through
CVQ. Since only the CVQ vhost device is needed, create it with a new
NetClientInfo.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It's convenient to call iova_tree_remove from a map returned from
iova_tree_find or iova_tree_find_iova. With the current code this is not
possible, since we will free it, and then we will try to search for it
again.
Fix it making accepting the map by value, forcing a copy of the
argument. Not applying a fixes tag, since there is no use like that at
the moment.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
File descriptor vdpa_device_fd is not free in the case of returning
error from vhost_vdpa_get_features. Fixing it by making all errors go to
the same error path.
Resolves: Coverity CID 1490785
Fixes: 8170ab3f43 ("vdpa: Extract get features part from vhost_vdpa_get_max_queue_pairs")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220802112447.249436-2-eperezma@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Finally offering the possibility to enable SVQ from the command line.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
To know the device features is needed for CVQ SVQ, so SVQ knows if it
can handle all commands or not. Extract from
vhost_vdpa_get_max_queue_pairs so we can reuse it.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Introduce the control virtqueue support for vDPA shadow virtqueue. This
is needed for advanced networking features like rx filtering.
Virtio-net control VQ copies the descriptors to qemu's VA, so we avoid
TOCTOU with the guest's or device's memory every time there is a device
model change. Otherwise, the guest could change the memory content in
the time between qemu and the device read it.
To demonstrate command handling, VIRTIO_NET_F_CTRL_MACADDR is
implemented. If the virtio-net driver changes MAC the virtio-net device
model will be updated with the new one, and a rx filtering change event
will be raised.
More cvq commands could be added here straightforwardly but they have
not been tested.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Do a simple forwarding of CVQ buffers, the same work SVQ could do but
through callbacks. No functional change intended.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
... such that no memory leaks on dangling net clients in case of
error.
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <1651890498-24478-4-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Qemu falls back on userland handlers even if vhost-user and vhost-vdpa
cases. These assumes a tap device can handle the packets.
If a vdpa device fail to start, it can trigger a sigsegv because of
that. Add dummy receiver that returns no progress so it can keep
running.
Fixes: 1e0a84ea49 ("vhost-vdpa: introduce vhost-vdpa net client")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20211125101614.76927-2-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Since net_init_vhost_vdpa is trying to open it. Not specifying it in the
command line crash qemu.
Fixes: 7327813d17 ("vhost-vdpa: open device fd in net_init_vhost_vdpa()")
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20211112193431.2379298-3-eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There is no reason to keep using the old one, since we neither use the
variadics arguments nor open it with O_DIRECT.
Also, net_client_init1, the caller of net_init_vhost_vdpa, wants all
net_client_init_fun to use Error API, so it's a good step in that
direction.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20211112193431.2379298-2-eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use g_autofree to ensure that `config` is freed when
vhost_vdpa_get_max_queue_pairs() returns.
Reported-by: Coverity (CID 1465228: RESOURCE_LEAK)
Fixes: 402378407d ("vhost-vdpa: multiqueue support")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20211102155157.241034-1-sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
This patch implements the multiqueue support for vhost-vdpa. This is
done simply by reading the number of queue pairs from the config space
and initialize the datapath and control path net client.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211020045600.16082-11-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch switches to let net_vhost_vdpa_init() to return
NetClientState *. This is used for the callers to allocate multiqueue
NetClientState for multiqueue support.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211020045600.16082-5-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch switches to open device fd in net_init_vhost_vpda(). This is
used to prepare for the multiqueue support.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211020045600.16082-2-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost-vdpa works only with specific devices. At startup, it second
guesses what the command line option handling will do and error out if
it thinks a non-virtio device will attach to them.
This second guessing is not only ugly, it can lead to wrong error
messages ('-device floppy,netdev=foo' should complain about an unknown
property, not about the wrong kind of network device being attached) and
completely ignores hotplugging.
Drop the old checks and implement .check_peer_type() instead to fix
this. As a nice side effect, it also removes one more dependency on the
legacy QemuOpts infrastructure and even reduces the code size.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20211008133442.141332-4-kwolf@redhat.com>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The queue_index of NetClientState should be assigned in set_netdev()
afterwards, so trying to net_vhost_vdpa_init() is meaningless. This
patch removes this.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210903091031.47303-12-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Vhost_vdpa_add() can fail for various reasons, so the assertion of the
succeed is wrong. Instead, we should free the NetClientState and
propagate the error to the caller
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210903091031.47303-11-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce new error label to avoid the unnecessary checking of net
pointer.
Fixes: 1e0a84ea49 ("vhost-vdpa: introduce vhost-vdpa net client")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210903091031.47303-10-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: 1e0a84ea49 ("vhost-vdpa: introduce vhost-vdpa net client")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210903091031.47303-9-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The previous vhost_net_cleanup is sufficient for freeing, calling
vhost_vdpa_del() in this case will lead an extra round of free. Note
that this kind of "double free" is safe since vhost_dev_cleanup() zero
the whole structure.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210903091031.47303-8-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The VhostVDPAState is just allocated by qemu_new_net_client() via
g_malloc0() in net_vhost_vdpa_init(). So s->vhost_net is NULL for
sure, let's remove this unnecessary check in vhost_vdpa_add().
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210903091031.47303-7-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch switches to initialize dev.nvqs from the VhostNetOptions
instead of assuming it was 2. This is useful for implementing control
virtqueue support which will be a single vhost_net structure with a
single cvq.
Note that nvqs is still set to 2 for all users and this patch does not
change functionality.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210903091031.47303-6-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
"acked_features" is unused, let's remove that.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210903091031.47303-2-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When RSS is enabled the device tries to load the eBPF program
to select RX virtqueue in the TUN. If eBPF can be loaded
the RSS will function also with vhost (works with kernel 5.8 and later).
Software RSS is used as a fallback with vhost=off when eBPF can't be loaded
or when hash population requested by the guest.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Several issues has been reported for query-netdev series. Consider
it's late in the rc, this reverts commit
d32ad10a14.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Several issues has been reported for query-netdev info
series. Consider it's late in the rc, this reverts commit
commit 59b5437eb7.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Several issues has been reported for query-netdev info
series. Consider it's late in the rc, this reverts commit
f2e8319d45.
Signed-off-by: Jason Wang <jasowang@redhat.com>
As we use QAPI NetClientState->stored_config to store and get information
about backend network devices, we can drop fill of legacy field info_str
for them.
We still use info_str field for NIC and hubports, so we can not completely
remove it.
Signed-off-by: Alexey Kirillov <lekiravi@yandex-team.ru>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The info_str field of the NetClientState structure is static and has a size
of 256 bytes. This amount is often unclaimed, and the field itself is used
exclusively for HMP "info network".
The patch translates info_str to dynamic memory allocation.
This action is also allows us to painlessly discard usage of this field
for backend devices.
Signed-off-by: Alexey Kirillov <lekiravi@yandex-team.ru>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The query-netdev command is used to get the configuration of the current
network device backends (netdevs).
This is the QMP analog of the HMP command "info network" but only for
netdevs (i.e. excluding NIC and hubports).
The query-netdev command returns an array of objects of the NetdevInfo
type, which are an extension of Netdev type. It means that response can
be used for netdev-add after small modification. This can be useful for
recreate the same netdev configuration.
Information about the network device is filled in when it is created or
modified and is available through the NetClientState->stored_config.
Signed-off-by: Alexey Kirillov <lekiravi@yandex-team.ru>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
fix the bug that fd will still open after the cleanup
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20201016030909.9522-1-lulu@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Vendor driver may not support or implement config
interrupt delivery for link status notifications.
In this event, vendor driver is expected to NACK
the feature, but guest will keep link always up.
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Message-Id: <1601582985-14944-1-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We want to introduce a new version of qemu_open() that uses an Error
object for reporting problems and make this it the preferred interface.
Rename the existing method to release the namespace for the new impl.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This patch set introduces a new net client type: vhost-vdpa.
vhost-vdpa net client will set up a vDPA device which is specified
by a "vhostdev" parameter.
Signed-off-by: Lingshan Zhu <lingshan.zhu@intel.com>
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Signed-off-by: Cindy Lu <lulu@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20200701145538.22333-15-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
