The PCI version is supported in lots of Operating Systems,
and has been successfully tested on:
- MS DOS 6.22 (using DC390 driver)
- MS Windows 3.11 (using DC390 driver)
- MS Windows 98 SE (using default driver)
- MS Windows NT 3.1 (using DC390 driver)
- MS Windows NT 4.0 (using default driver)
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The Buildbot has detected a new failure on builder default_i386_rhel61 while
building qemu.
Full details are available at:
http://buildbot.b1-systems.de/qemu/builders/default_i386_rhel61/builds/304
The proper fix is non-trivial so let's disable the build by default until it's
fixed properly.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds an emulation for the LSI Megaraid SAS 8708EM2 HBA.
I've tested it to work with Linux, Windows Vista, and Windows7.
Signed-off-by: Hannes Reinecke <hare@suse.de>
[ Squashed trivial changes from Andreas Faerber, rebased over IOMMU
and QBus changes - Paolo ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Speeds up the build.
xilinx_ethlite uses tswap32() and is thus target-dependent.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
It's been orphaned, not compiling for a long time and despite Apple's
drop of their Rosetta ppc emulation technology with Mac OS X Lion no one
has stepped up to fix it.
Testing necessary changes wrt QOM'ification thus is impossible, so we
might as well remove it completely.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Flash can be enabled by calling pc_system_firmware_init
with the system_flash_enabled parameter being non-zero.
If system_flash_enabled is zero, then the older qemu
rom creation method will be used.
If flash is enabled and a pflash image is found, then
it is used for the system firmware image.
If flash is enabled and a pflash image is not initially
found, then a read-only pflash device is created using
the -bios filename.
KVM cannot execute from a pflash region currently.
Therefore, when KVM is enabled, the old rom based
initialization method is used.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Prepare Intel 82378 emulation for use by PReP platforms.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Create ISA bus in this device (suggested by Markus).
Rebase onto Memory API, mark memory ops as Little Endian.
Add VMState. Provide access to i8259 IRQs via qdev GPIOs.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Prepare Intel 82374 emulation for use by Intel 82378 PCI->ISA bridge.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Confine to CONFIG_I82374. Add VMState.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Reviewed-by: Alexander Graf <agraf@suse.de>
Based on the implementation from Hector Martin <hector@marcansoft.com>
Hectors's implementation completely sidestepped the qemu usb system and
used libusb directly for usb device pass through. So I've ripped out
the libusb bits (or left them in disabled, as reference for further
coding) and hooked up the qemu subsystem instead. That work is not
complete yet though, partly due to limitations of the qemu usb
subsystem. Nevertheless I think it is better to continue development
in-tree, especially as the qemu usb bits need a bunch of improvements
too for decent usb 3.0 support.
Current state:
- usb-storage emulation should work ok.
- Devices which need constant polling (HID emulation like usb-tablet)
are known to not work.
- ISO xfers are not implemented yet.
- superspeed ports are not implemented yet.
- usb pass-through is completely untested so far.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
LX60 carry 4 Mbyte FLASH and 128 Kbyte SRAM, LX200 carry 16 Mbyte FLASH
and 32 Mbyte SRAM. Either of these memories may be mapped to the system
ROM region.
Select boot from FLASH if -kernel option is not specified, otherwise
boot from SRAM.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
No target-specific bits remaining, let's move it over.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
These boards carry similar hardware: SDRAM (48M for LX110, 64M for LX60,
96M for LX200), 16 Mbyte FLASH, FPGA, 10/100 Mbps Ethernet PHY and 16550
UART. FPGA may be loaded with almost any Tensilica processor. It is also
used to implement Ethernet MAC, e.g. OpenCores 10/100 Mbps Ethernet MAC
and LED/DIP switches access.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This is a DP264 variant, SMP capable, no unusual hardware present.
The emulation does not currently include any PCI IOMMU code.
Hopefully the generic support for that can be merged to HEAD soon.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Compile g364fb in hwlib. Two compilations less for the full build.
Acked-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
With all of the pre-existing code that would not compile gone,
this is the earliest point at which the target can be enabled.
There is no machine defined yet, so this will crash on startup.
Enable the target anyway, to make sure that further compilation
problems do not creep back in.
Signed-off-by: Richard Henderson <rth@twiddle.net>
This patch finally merges the EHCI host adapter aka USB 2.0 support.
Based on the ehci bits collected @ git://git.kiszka.org/qemu.git ehci
EHCI has a long out-of-tree history. Project was started by Mark
Burkley, with contributions by Niels de Vos. David S. Ahern continued
working on it. Kevin Wolf, Jan Kiszka and Vincent Palatin contributed
bugfixes.
/me (Gerd Hoffmann) picked it up where it left off, prepared the code
for merge, fixed a few bugs and added basic user docs.
Cc: David S. Ahern <daahern@cisco.com>
Cc: Jan Kiszka <jan.kiszka@web.de>
Cc: Kevin Wolf <mail@kevin-wolf.de>
Cc: Vincent Palatin <vincent.palatin_qemu@m4x.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds almost complete support for the Milkymist system-on-chip
(http://www.milkymist.org).
Additional to running bare metal applications, booting a linux kernel with
initrd is supported.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for Milkymist's memory card core.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Upcomming little endian platform will use 16550 serial driver.
Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
This patch adds support for the following two BSPs:
- LM32 EVR32 BSP (as used by RTEMS)
- uclinux BSP by Theobroma Systems
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Every device that can do PCI should also be able to do IDE. So let's move
the IDE definitions over to pci.mak.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The core pcnet emulation code is used by both the PCI "pcnet" device
and the SPARC "lance" device. Split the common code frm the PCI code so
that that can be configures independantly.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Fix breakage from previous commit (missing pci.mak, and incorrect
include in default-configs/s390x-softmmu.mak).
Signed-off-by: Paul Brook <paul@codesourcery.com>
Make virtio devices optional. Selecting individual devices is not useful
as the host bindings are all in one file.
Signed-off-by: Paul Brook <paul@codesourcery.com>
use empty_slot device for the RAM which is not installed
Models without ECC don't trap when missing ram is accessed.
v0->v1 compile only once and fix indentation
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Since commit 8da3ff1809 ("MMIO callback
interface changes"), the addresses passed to the I/O functions are an
offset to the start of the area. As a consequence, there is no need to
correct the address using the value of IOBR. This make possible the use
of the default MMIO functions. Moreover the addresses are now remaped
when the value if IOBR change.
The memory area corresponds to the devices behing the PCI bus, it should
not be mapped by the PCI controller. Remove the corresponding code.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Make win2k install hack unconditional as it is still restricted to
x86 only in vl.c.
Replace TARGET_PAGE_SIZE and 4096 with PAGE_SIZE.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
As soon as virtio-pci.c gets compiled and used on S390 the internal qdev magic
gets confused and tries to give us PCI devices instead of S390 virtio devices.
Since we don't have PCI on S390, we can safely not compile virtio-pci at all.
In order to do this I added a new config option "CONFIG_VIRTIO_PCI" that I
enabled for every platform except S390. Thanks to this the change should be a
complete nop for every other platform.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The OHCI emulation isn't obviously broken and there are people who want to use
it. Let's build it by default so that it can be enabled via -device.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Let's enable the basics for system emulation so we can run virtual machines
with KVM!
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
First user of new config-devices.mak
Patchworks-ID: 35198
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We generate config-devices.h from there automatically.
We need to do it in main Makefile, because we are going to need a main
Makefile for them.
Patchworks-ID: 35196
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
