Use a common helper with PACK ASCII as the differences are limited to
the stride of the source operand.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <20170531220129.27724-25-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
For that we need to make program_interrupt available to qemu-user.
Fortunately there is almost nothing to change as both kvm_enabled and
CONFIG_KVM evaluate to false in that case.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <20170531220129.27724-22-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
As MVCL and MVCLE only differ by their operands, use a common
do_mvcl helper. Optimize it calling fast_memmove and fast_memset.
Correctly write back addresses. Check that r1 and r2/r3 registers
are even.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <20170531220129.27724-21-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
adj_len_to_page doesn't return the correct result when the address
is already page aligned and the length is bigger than a page. Fix that.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <20170531220129.27724-20-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
As CLCL and CLCLE mostly differ by their operands, use a common do_clcl
helper. Another difference is that CLCL is not interruptible.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <20170531220129.27724-19-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
There are multiple issues with the COMPARE LOGICAL LONG EXTENDED
instruction:
- The test between the two operands is inverted, leading to an inversion
of the cc values 1 and 2.
- The address and length of an operand continue to be decreased after
reaching the end of this operand. These values are then wrong write
back to the registers.
- We should limit the amount of bytes to process, so that interrupts can
be served correctly.
At the same time rename dest into src1 and src into src3 to match the
operand names and make the code less confusing.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <20170531220129.27724-18-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Improve fix_address to also handle the 24-bit mode. Rename fix_address
to wrap_address to better explain what is changed.
Replace the calls to get_address with x2 = 0 and b2 = 0 by
call to wrap_address, leading to the removal of this function. Rename
get_address_31fix into get_address.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <20170531220129.27724-15-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
And at the same time make IPTE SMP aware.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Message-Id: <20170531220129.27724-4-aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
While the previous patch is required for proper conformance,
the vast majority of target insns are MVC and XC for implementing
memmove and memset respectively. The next most common are CLC,
TR, and SVC.
Implementing these (and a few others for which we already have
an implementation) directly is faster than going through full
translation to a TB.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Previously, helper_ex would construct the insn and then implement
the insn via direct calls other helpers. This was sufficient to
boot Linux but that is all.
It is easy enough to go the whole nine yards by stashing state for
EXECUTE within the cpu, and then rely on a new TB to be created
that properly and completely interprets the insn.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This split will be required for implementing EXECUTE properly.
Do this now as a separate step to aid comparison of before and
after TB listings.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Also provide the cross-cpu tlb flushing required by the PoO.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
(1) The OR of the low bits or R1 into INSN were not being done
consistently; it was forgotten along all but the SVC path.
(2) The setting of ILEN was wrong on SVC path for EXRL.
(3) The data load for ICM read too much.
Fix these by consolidating data load at the beginning, using
get_ilen to control the number of bytes loaded, and ORing in
the byte from R1. Use extract64 from the full aligned insn
to extract arguments.
Pass in ILEN rather than RET as the more natural way to give
the required data along the SVC path.
Modify ENV->CC_OP directly rather than include it in the
functional interface.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Fix saving exception_index around mmu_translate; eliminate a dead store.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This will avoid needing forward declarations in following patches.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
TEST BLOCK was likely once used to execute basic memory
tests, but nowadays it's just a (slow) way to clear a page.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1495128400-23759-1-git-send-email-thuth@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We have never has the concept of global TLB entries which would avoid
the flush so we never actually use this flag. Drop it and make clear
that tlb_flush is the sledge-hammer it has always been.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
[DG: ppc portions]
Acked-by: David Gibson <david@gibson.dropbear.id.au>
We've currently got 18 architectures in QEMU, and thus 18 target-xxx
folders in the root folder of the QEMU source tree. More architectures
(e.g. RISC-V, AVR) are likely to be included soon, too, so the main
folder of the QEMU sources slowly gets quite overcrowded with the
target-xxx folders.
To disburden the main folder a little bit, let's move the target-xxx
folders into a dedicated target/ folder, so that target-xxx/ simply
becomes target/xxx/ instead.
Acked-by: Laurent Vivier <laurent@vivier.eu> [m68k part]
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> [tricore part]
Acked-by: Michael Walle <michael@walle.cc> [lm32 part]
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x part]
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [s390x part]
Acked-by: Eduardo Habkost <ehabkost@redhat.com> [i386 part]
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [sparc part]
Acked-by: Richard Henderson <rth@twiddle.net> [alpha part]
Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa part]
Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ppc part]
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [crisµblaze part]
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32 part]
Signed-off-by: Thomas Huth <thuth@redhat.com>
