Make the cache ID system registers (CLIDR, CSSELR, CCSIDR, CTR)
visible to AArch64. These are mostly simple 64-bit extensions of the
existing 32 bit system registers and so can share reginfo definitions.
CTR needs to have a split definition, but we can clean up the
temporary user-mode implementation in favour of using the CPU-specified
reset value, and implement the system-mode-required semantics of
restricting its EL0 accessibility if SCTLR.UCT is not set.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
The raw read and write functions were using the ARM_CP_64BIT flag in
ri->type to determine whether to treat the register's state field as
uint32_t or uint64_t; however AArch64 register info structs don't use
that flag. Abstract out the "how big is the field?" test into a
function and fix it to work for AArch64 registers. For this to work
we must ensure that the reginfo structs put into the hashtable have
the correct state field for their use, not the placeholder STATE_BOTH.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Save and restore the ARM KVM VGIC state from the kernel. We rely on
QEMU to marshal the GICState data structure and therefore simply
synchronize the kernel state with the QEMU emulated state in both
directions.
We take some care on the restore path to check the VGIC has been
configured with enough IRQs and CPU interfaces that we can properly
restore the state, and for separate set/clear registers we first fully
clear the registers and then set the required bits.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1392687921-26921-1-git-send-email-christoffer.dall@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Support creating the ARM vgic device through the device control API and
setting the base address for the distributor and cpu interfaces in KVM
VMs using this API.
Because the older KVM_CREATE_IRQCHIP interface needs the irq chip to be
created prior to creating the VCPUs, we first test if we can use the
device control API in kvm_arch_irqchip_create (using the test flag from
the device control API). If we cannot, it means we have to fall back to
KVM_CREATE_IRQCHIP and use the older ioctl at this point in time. If
however, we can use the device control API, we don't do anything and
wait until the arm_gic_kvm driver initializes and let that use the
device control API.
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1392687720-26806-5-git-send-email-christoffer.dall@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduces two simple functions:
int kvm_device_ioctl(int fd, int type, ...);
int kvm_create_device(KVMState *s, uint64_t type, bool test);
These functions wrap the basic ioctl-based interactions with KVM in a
way similar to other KVM ioctl wrappers.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1392687720-26806-4-git-send-email-christoffer.dall@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce kvm_arch_irqchip_create an arch-specific hook in preparation
for architecture-specific use of the device control API to create IRQ
chips.
Following patches will implement the ARM irqchip create method to prefer
the device control API over the older KVM_CREATE_IRQCHIP API.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1392687720-26806-3-git-send-email-christoffer.dall@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update to tag v3.14-rc3 (6d0abeca3242a88cab8232e4acd7e2bf088f3bc2)
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1392687720-26806-2-git-send-email-christoffer.dall@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The GIC_SET_LEVEL macro unfortunately overwrote the entire level
bitmask instead of just or'ing on the necessary bits, causing active
level PPIs on a core to clear PPIs on other cores.
Cc: qemu-stable@nongnu.org
Reported-by: Rob Herring <rob.herring@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1393031030-8692-1-git-send-email-christoffer.dall@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In ARMv5 level 2 page table descriptors, each 4K or 64K page is split into
four subpages, each of which can have different access permission settings,
which are specified by four two-bit fields in the l2 descriptor. A
long-standing cut-and-paste error meant we were using the wrong bits in
the virtual address to select the access-permission field for 4K pages.
The error has presumably not been noticed before because most guests don't
make use of the ability to set the access permissions differently for
each 1K subpage: if the guest gives the whole page the same access
permissions it doesn't matter which of the 4 AP fields we select.
(The whole issue is irrelevant for ARMv7 CPUs anyway because subpages
aren't supported there.)
Reported-by: Vivek Rai <Vivek.Rai@emulex.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1392667690-8731-1-git-send-email-peter.maydell@linaro.org
The ethernet device in the musicpal only has two tx queues,
but we modelled it with four CTDP registers, presumably a
cut and paste from the rx queue registers. Since the tx_queue[]
array is only 2 entries long this allowed a guest to overrun
this buffer. Remove the nonexistent registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1392737293-10073-1-git-send-email-peter.maydell@linaro.org
Acked-by: Jan Kiszka <jan.kiszka@web.de>
Cc: qemu-stable@nongnu.org
The Exynos4210 combiner has IIC_NIRQ inputs and IIC_NGRP outputs;
use the correct constant in the loop initializing our output
sysbus IRQs so that we don't overrun the output_irq[] array.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1392659611-8439-1-git-send-email-peter.maydell@linaro.org
Reviewed-by: Andreas Färber <afaerber@suse.de>
Cc: qemu-stable@nongnu.org
Correct some obviously nonsensical bit manipulation spotted by Coverity
when constructing the short-form PAR value for ATS operations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1392659525-8335-1-git-send-email-peter.maydell@linaro.org
The integrator's timer read/write functions log an error for
bad addresses in guest accesses, but were falling through and
using an out of bounds array index rather than returning early.
Fix this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1392647854-8067-4-git-send-email-peter.maydell@linaro.org
Cc: qemu-stable@nongnu.org
Add a cast to avoid an unintended sign extension that
would mean we returned 0xffffffff in the high 32 bits
for an IA0 read if bit 31 in the MAC address was 1.
(This is harmless since we'll only be doing 4 byte
reads, but it could be confusing, so best avoided.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1392647854-8067-3-git-send-email-peter.maydell@linaro.org
Fix incorrect use of sizeof() rather than ARRAY_SIZE() to guard
accesses into the mb_clock[] array, which was allowing a malicious
guest to overwrite the end of the array.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1392647854-8067-2-git-send-email-peter.maydell@linaro.org
Cc: qemu-stable@nongnu.org
This is now obsolete - remove the header and all its inclusions.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Inline the only usage of each of xilinx_axiethernet_init and
xilinx_axidma_init. Converts this init to at least a semi-recent QOM
styling.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Inline the only usage. Converts this init to at least a semi-recent QOM
styling.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Inline these usages. Converts these init to at least a semi-recent QOM
styling.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Inline these usages. Converts these init to at least a semi-recent QOM
styling.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Define (missing) macros for the interrupt and memory maps for the sake
of self documentation.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Define macros for the interrupt and memory maps for the sake of self
documentation.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Define macros for the interrupt map for the sake of self documentation.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
gmodule-2.0's pkg-config files include -Wl,--export-dynamic, which breaks
static builds. It is a glib bug, but we need to support --static builds for
the linux-user targets, and in the end all that is needed to fix this is:
* outlaw --enable-modules --static, which makes little sense anyway
* only include gmodule-2.0's cflags and ldflags if --enable-modules is
specified on the command line.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1393346215-5636-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qemu_get_queue() is a shorthand for qemu_get_subqueue(n->nic, 0). Use
the shorthand where possible.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There is no need to access backend->info->has_vnet_hdr() and friends
anymore. Use the qemu_has_vnet_hdr() API instead.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The virtio_net offload APIs are used on the NIC's peer (i.e. the tap
device). The API was defined to implicitly use nc->peer, saving the
caller the trouble.
This wasn't ideal because:
1. There are callers who have the peer but not the NIC. Currently they
are forced to bypass the API and access peer->info->... directly.
2. The rest of the net.h API uses nc, not nc->peer, so it is
inconsistent.
This patch pushes nc->peer back up to callers.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
As far as we can tell, all known bugs have been fixed:
1. Parallel migrations are working
2. IPv6 migration is working
3. virt-test is working
I'm not comfortable sending the revised libvirt patch
until this is accepted or review suggestions are addressed,
(including pin-all support. It does not make sense to
remove experimental for one thing and not the other. That's
too many trips through the libvirt community).
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Push zero'd pages into the XBZRLE cache
A page that was cached by XBZRLE, zero'd and then XBZRLE'd again
was being compared against a stale cache value
Don't use 'qemu_put_buffer_async' to put pages from the XBZRLE cache
Since the cache might change before the data hits the wire
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Fix comparison of vmstate_info_int32_le so that it succeeds if loaded
value is (l)ess than or (e)qual
When the comparison succeeds, assign the value loaded
This is a change in behaviour but I think the original intent, since
the idea is to check if the version/size of the thing you're loading is
less than some limit, but you might well want to do something based on
the actual version/size in the file
Fix up comment and name text
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
fwrite() returns the number of items written. But when there is one
error, it can return a short write.
In the particular bug that I was tracking, I did a migration to a
read-only filesystem. And it was able to finish the migration
correctly. fwrite() never returned a negative error code, nor zero,
always 4096. (migration writes chunks of about 14000 bytes). And it
was able to "complete" the migration with success (yes, reading the
file was a bit more difficult).
To add insult to injury, if your amount of memory was big enough (12GB
on my case), it overwrote some important structure, and from them,
malloc failed. This check makes the problem go away.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
* remotes/mdroth/qga-pull-2014-02-24:
qemu-ga: isa-serial support on Windows
qga: Fix memory allocation pasto
qga: Don't require 'time' argument in guest-set-time command
qga: vss-win32: Fix interference with snapshot deletion by other VSS request
qga: vss-win32: Fix interference with snapshot creation by other VSS requesters
qga: vss-win32: Use NULL as an invalid pointer for OpenEvent and CreateEvent
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- add support for ML605 and KC705 FPGA boards;
- flush opencores_eth queue when new RX descriptor is available;
- add basic checks to cache opcodes;
- make core configuration available to tests;
- implement HW config ID special registers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=qbXq
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/xtensa/tags/20140224-xtensa' into staging
Xtensa fixes and improvements queue 2014-02-24:
- add support for ML605 and KC705 FPGA boards;
- flush opencores_eth queue when new RX descriptor is available;
- add basic checks to cache opcodes;
- make core configuration available to tests;
- implement HW config ID special registers.
# gpg: Signature made Mon 24 Feb 2014 00:52:42 GMT using RSA key ID F83FA044
# gpg: Good signature from "Max Filippov <max.filippov@cogentembedded.com>"
# gpg: aka "Max Filippov <jcmvbkbc@gmail.com>"
* remotes/xtensa/tags/20140224-xtensa:
target-xtensa: provide HW confg ID registers
target-xtensa: refactor standard core configuration
target-xtensa: add basic tests for cache opcodes
target-xtensa: allow using core configuration in tests
target-xtensa: add overridable test_init macro
target-xtensa: add basic checks to icache opcodes
target-xtensa: add basic checks to dcache opcodes
target-xtensa: add RRRI4 opcode format fields
opencores_eth: flush queue whenever can_receive can go from false to true
hw/xtensa: add support for ML605 and KC705 FPGA board
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch fixes configure so that the netmap backend is not compiled in if the
host doesn't support an API version >= 11. A version upper bound (15) has been
added so that the netmap API can be extended with some minor features without
requiring QEMU code modifications.
Moreover, some changes have been done to net/netmap.c in order to reflect the
current netmap API/ABI (11).
The NETMAP_WITH_LIBS macro makes possible to include some utilities (e.g.
netmap ring macros, D(), RD() and other high level functions) through the netmap
headers. In this way we get rid of the D and RD macro definitions in the QEMU
code, and we open the way for further code simplifications that will be
introduced by future patches.
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Whit this patch, the netmap backend supports TSO/UFO/CSUM
offloadings, and accepts the virtio-net header, similarly to what
happens with TAP. The offloading callbacks in the NetClientInfo
interface have been implemented.
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Since TAP offloadings are manipulated through a new API, it's
not necessary to export them in include/net/tap.h anymore.
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
With this patch, virtio-net and vmxnet3 frontends make
use of the qemu_peer_* API for backend offloadings manipulations,
instead of calling TAP-specific functions directly.
We also remove the existing checks which prevent those frontends
from using offloadings with backends different from TAP (e.g. netmap).
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The TAP NetClientInfo structure is inizialized with the TAP-specific
functions that manipulates offloading features.
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some new callbacks have been added to generalize the operations done
by virtio-net and vmxnet3 frontends to manipulate TAP offloadings.
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The tap_has_vnet_hdr() and tap_has_vnet_hdr_len() functions used
to return int, even though they only return true/false values.
This patch changes the prototypes to return bool.
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The following registers control whether MAC can receive frames:
- MODER.RXEN bit that enables/disables receiver;
- TX_BD_NUM register that specifies number of RX descriptors.
Notify QEMU networking core when the MAC is ready to receive frames.
Discard frame and raise BUSY interrupt when the frame arrives but the
current RX descriptor is not empty.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ZaDG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches
# gpg: Signature made Fri 21 Feb 2014 21:42:24 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (54 commits)
iotests: Mixed quorum child device specifications
quorum: Simplify quorum_open()
quorum: Add unit test.
quorum: Add quorum_open() and quorum_close().
quorum: Implement recursive .bdrv_recurse_is_first_non_filter in quorum.
quorum: Add quorum_co_flush().
quorum: Add quorum_invalidate_cache().
quorum: Add quorum_getlength().
quorum: Add quorum mechanism.
quorum: Add quorum_aio_readv.
blkverify: Extract qemu_iovec_clone() and qemu_iovec_compare() from blkverify.
quorum: Add quorum_aio_writev and its dependencies.
quorum: Create BDRVQuorumState and BlkDriver and do init.
quorum: Create quorum.c, add QuorumChildRequest and QuorumAIOCB.
check-qdict: Test termination of qdict_array_split()
check-qdict: Adjust test for qdict_array_split()
qdict: Extract non-QDicts in qdict_array_split()
qemu-config: Sections must consist of keys
qemu-iotests: Check qemu-img command line parsing
qemu-img: Allow -o help with incomplete argument list
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/bonzini/configure:
build: softmmu targets do not have a "main.o" file
configure: Disable libtool if -fPIE does not work with it (bug #1257099)
block: convert block drivers linked with libs to modules
Makefile: introduce common-obj-m and block-obj-m for DSO
Makefile: install modules with "make install"
module: implement module loading
rules.mak: introduce DSO rules
darwin: do not use -mdynamic-no-pic
block: use per-object cflags and libs
rules.mak: allow per object cflags and libs
rules.mak: fix $(obj) to a real relative path
util: Split out exec_dir from os_find_datadir
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Check that the C++ compiler works with the C compiler; if it
does not, then don't pass CXX to the build process. This
fixes a regression where QEMU was no longer building if the
build environment didn't have a C++ compiler (introduced
in commit 3144f78b, which incorrectly assumed that rules.mak
would only see a non-empty $(CXX) if configure had actually
found a working C++ compiler).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reported-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Tested-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-id: 1392909016-14028-1-git-send-email-peter.maydell@linaro.org
Add HDA_AUDIO type and macro, drop DO_UPCAST().
Had to add a abstract hda audio class as parent
for all hda-* variants to make that fly. Killed
some init code duplication while being at it.
Cc: Andreas Färber <afaerber@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Coalesce all standard configuration sections into single
DEFAULT_SECTIONS macro for all cores. This allows to add new features in
a single place: overlay_tool.h
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
