Make debug tests conditional on the presence of the debug option in the
config and tests that depend on the presence/number of instruction or
data breakpoint registers on the corresponding definitions. Use
configured debug interrupt level instead of the hardcoded value to set
up IRQ handler and access debug EPC register.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Uncomment test_boolean in the test makefile. Make actual tests code
conditional on the presence of boolean option in the config.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Use bbci.l/bbsi.l instead of bbci/bbsi, as they are assembly macros that
accept little-endian bit number and produce correct immediate for both
little and big endian configurations. Choose value loaded into register
for bbc/bbs opcodes based on configuration endianness.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Don't use 'loop' opcode in generic testsuite completion code, only use
core opcodes to make it work with any configuration.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Configurations with LITBASE register may use absolute literals by
default. Pass --no-absolute-literals option to assembler to use
PC-relative literals instead.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Configurations w/o vecbase may have vectors not grouped together and not
in fixed order. They may not always be grouped into single output
sections by assigning next offset to dot, as it may sometimes move dot
backwards and sometimes they may even belong to different memory region.
Don't group vectors into single output section. Instead put each vector
into its own section ant put it at its default virtual address.
Reserve 4KBytes from the default vectors base and put rest of the code
and data starting from there. Mark vectors sections as executable,
otherwise their contents is discarded. There may be as little as 16
bytes reserved for some vectors, load handler address into a0 and use
ret.n to jump there to make vector code fit into this 16 byte space.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
When test suite with multiple tests fails it's not obvious which test
failed. Pring "failed" in every invocation of test_fail. Do printing
when DEBUG preprocessor macro is defined.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Add tests for MSA integer max/min instructions. This includes
following instructions:
* MAX_A.B - maximum of absolute of two signed values (bytes)
* MAX_A.H - maximum of absolute of two signed values (halfwords)
* MAX_A.W - maximum of absolute of two signed values (words)
* MAX_A.D - maximum of absolute of two signed values (doublewords)
* MIN_A.B - minimum of absolute of two signed values (bytes)
* MIN_A.H - minimum of absolute of two signed values (halfwords)
* MIN_A.W - minimum of absolute of two signed values (words)
* MIN_A.D - minimum of absolute of two signed values (doublewords)
* MAX_S.B - maximum of two signed values (bytes)
* MAX_S.H - maximum of two signed values (halfwords)
* MAX_S.W - maximum of two signed values (words)
* MAX_S.D - maximum of two signed values (doublewords)
* MIN_S.B - minimum of two signed values (bytes)
* MIN_S.H - minimum of two signed values (halfwords)
* MIN_S.W - minimum of two signed values (words)
* MIN_S.D - minimum of two signed values (doublewords)
* MAX_U.B - maximum of two unsigned values (bytes)
* MAX_U.H - maximum of two unsigned values (halfwords)
* MAX_U.W - maximum of two unsigned values (words)
* MAX_U.D - maximum of two unsigned values (doublewords)
* MIN_U.B - minimum of two unsigned values (bytes)
* MIN_U.H - minimum of two unsigned values (halfwords)
* MIN_U.W - minimum of two unsigned values (words)
* MIN_U.D - minimum of two unsigned values (doublewords)
Each test consists of 80 test cases, so altogether there are 1920
test cases.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551185735-17154-8-git-send-email-aleksandar.markovic@rt-rk.com>
Add tests for MSA integer compare instructions. This includes
following instructions:
* CEQ.B - integer compare equal (bytes)
* CEQ.H - integer compare equal (halfwords)
* CEQ.W - integer compare equal (words)
* CEQ.D - integer compare equal (doublewords)
* CLE_S.B - signed integer compare less or equal (bytes)
* CLE_S.H - signed integer compare less or equal (halfwords)
* CLE_S.W - signed integer compare less or equal (words)
* CLE_S.D - signed integer compare less or equal (doublewords)
* CLE_U.B - unsigned integer compare less or equal (bytes)
* CLE_U.H - unsigned integer compare less or equal (halfwords)
* CLE_U.W - unsigned integer compare less or equal (words)
* CLE_U.D - unsigned integer compare less or equal (doublewords)
* CLT_S.B - signed integer compare less or equal (bytes)
* CLT_S.H - signed integer compare less or equal (halfwords)
* CLT_S.W - signed integer compare less or equal (words)
* CLT_S.D - signed integer compare less or equal (doublewords)
* CLT_U.B - unsigned integer compare less or equal (bytes)
* CLT_U.H - unsigned integer compare less or equal (halfwords)
* CLT_U.W - unsigned integer compare less or equal (words)
* CLT_U.D - unsigned integer compare less or equal (doublewords)
Each test consists of 80 test cases, so altogether there are 1600 test
cases.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551185735-17154-2-git-send-email-aleksandar.markovic@rt-rk.com>
Add wrappers for MSA integer compare instructions.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Change directory name 'bit-counting' to 'bit-count'. This is just for
cosmetic and consistency sake. This was the only subdirectory in MSA
test directory that uses ending 'ing'.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Correct path to headers in tests/tcg/mips/user/ase/msa/bit-counting/*
source files.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Add tests for MSA logic instructions. This includes following
instructions:
* AND.V - logical AND
* NOR.V - logical NOR
* OR.V - logical OR
* XOR.V - logical XOR
Each test consists of 80 test cases, so altogether there are 320
test cases.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add wrappers for MSA logic instructions.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add tests for MSA interleave instructions. This includes following
instructions:
* ILVEV.B - interleave even (bytes)
* ILVEV.H - interleave even (halfwords)
* ILVEV.W - interleave even (words)
* ILVEV.D - interleave even (doublewords)
* ILVOD.B - interleave odd (bytes)
* ILVOD.H - interleave odd (halfwords)
* ILVOD.W - interleave odd (words)
* ILVOD.D - interleave odd (doublewords)
* ILVL.B - interleave left (bytes)
* ILVL.H - interleave left (halfwords)
* ILVL.W - interleave left (words)
* ILVL.D - interleave left (doublewords)
* ILVR.B - interleave right (bytes)
* ILVR.H - interleave right (halfwords)
* ILVR.W - interleave right (words)
* ILVR.D - interleave right (doublewords)
Each test consists of 80 test cases, so altogether there are 1280
test cases.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add wrappers for MSA interleave instructions.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add tests for MSA bit counting instructions. This includes following
instructions:
* NLOC.B - number of leading ones (bytes)
* NLOC.H - number of leading ones (halfwords)
* NLOC.W - number of leading ones (words)
* NLOC.D - number of leading ones (doublewords)
* NLZC.B - number of leading zeros (bytes)
* NLZC.H - number of leading zeros (halfwords)
* NLZC.W - number of leading zeros (words)
* NLZC.D - number of leading zeros (doublewords)
* PCNT.B - population count / number of ones (bytes)
* PCNT.H - population count / number of ones (halfwords)
* PCNT.W - population count / number of ones (words)
* PCNT.D - population count / number of ones (doublewords)
Each test consists of 80 test cases, so altogether there are 960 test
cases.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a header that contains wrappers around MSA instructions assembler
invocations. For now, only bit counting instructions (NLOC, NLZC, and
PCNT; each in four data format flavors) are supported.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a header that contains test utilities. For now, it contains
only a function for checking and printing test results for bit
counting and similar MSA instructions.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
The file tests/tcg/mips/include/test_inputs.h is planned to
contain various test inputs. For now, it contains 64 128-bit
pattern inputs (alternating groups od ones and zeroes) and
16 128-bit random inputs.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Remove a file that was added long time ago by mistake. The commit
that introduced this file was commit d70080c4 (from 2012).
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
We can't build QEMU with this but we can use this image to build newer
arm64 testcases which need more up to date tools.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190201195404.30486-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add Makefiles for two new direcitories.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
MIPS TCG test will be organized by ISAs and ASEs in future.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Most files that have TABs only contain a handful of them. Change
them to spaces so that we don't confuse people.
disas, standard-headers, linux-headers and libdecnumber are imported
from other projects and probably should be exempted from the check.
Outside those, after this patch the following files still contain both
8-space and TAB sequences at the beginning of the line. Many of them
have a majority of TABs, or were initially committed with all tabs.
bsd-user/i386/target_syscall.h
bsd-user/x86_64/target_syscall.h
crypto/aes.c
hw/audio/fmopl.c
hw/audio/fmopl.h
hw/block/tc58128.c
hw/display/cirrus_vga.c
hw/display/xenfb.c
hw/dma/etraxfs_dma.c
hw/intc/sh_intc.c
hw/misc/mst_fpga.c
hw/net/pcnet.c
hw/sh4/sh7750.c
hw/timer/m48t59.c
hw/timer/sh_timer.c
include/crypto/aes.h
include/disas/bfd.h
include/hw/sh4/sh.h
libdecnumber/decNumber.c
linux-headers/asm-generic/unistd.h
linux-headers/linux/kvm.h
linux-user/alpha/target_syscall.h
linux-user/arm/nwfpe/double_cpdo.c
linux-user/arm/nwfpe/fpa11_cpdt.c
linux-user/arm/nwfpe/fpa11_cprt.c
linux-user/arm/nwfpe/fpa11.h
linux-user/flat.h
linux-user/flatload.c
linux-user/i386/target_syscall.h
linux-user/ppc/target_syscall.h
linux-user/sparc/target_syscall.h
linux-user/syscall.c
linux-user/syscall_defs.h
linux-user/x86_64/target_syscall.h
slirp/cksum.c
slirp/if.c
slirp/ip.h
slirp/ip_icmp.c
slirp/ip_icmp.h
slirp/ip_input.c
slirp/ip_output.c
slirp/mbuf.c
slirp/misc.c
slirp/sbuf.c
slirp/socket.c
slirp/socket.h
slirp/tcp_input.c
slirp/tcpip.h
slirp/tcp_output.c
slirp/tcp_subr.c
slirp/tcp_timer.c
slirp/tftp.c
slirp/udp.c
slirp/udp.h
target/cris/cpu.h
target/cris/mmu.c
target/cris/op_helper.c
target/sh4/helper.c
target/sh4/op_helper.c
target/sh4/translate.c
tcg/sparc/tcg-target.inc.c
tests/tcg/cris/check_addo.c
tests/tcg/cris/check_moveq.c
tests/tcg/cris/check_swap.c
tests/tcg/multiarch/test-mmap.c
ui/vnc-enc-hextile-template.h
ui/vnc-enc-zywrle.h
util/envlist.c
util/readline.c
The following have only TABs:
bsd-user/i386/target_signal.h
bsd-user/sparc64/target_signal.h
bsd-user/sparc64/target_syscall.h
bsd-user/sparc/target_signal.h
bsd-user/sparc/target_syscall.h
bsd-user/x86_64/target_signal.h
crypto/desrfb.c
hw/audio/intel-hda-defs.h
hw/core/uboot_image.h
hw/sh4/sh7750_regnames.c
hw/sh4/sh7750_regs.h
include/hw/cris/etraxfs_dma.h
linux-user/alpha/termbits.h
linux-user/arm/nwfpe/fpopcode.h
linux-user/arm/nwfpe/fpsr.h
linux-user/arm/syscall_nr.h
linux-user/arm/target_signal.h
linux-user/cris/target_signal.h
linux-user/i386/target_signal.h
linux-user/linux_loop.h
linux-user/m68k/target_signal.h
linux-user/microblaze/target_signal.h
linux-user/mips64/target_signal.h
linux-user/mips/target_signal.h
linux-user/mips/target_syscall.h
linux-user/mips/termbits.h
linux-user/ppc/target_signal.h
linux-user/sh4/target_signal.h
linux-user/sh4/termbits.h
linux-user/sparc64/target_syscall.h
linux-user/sparc/target_signal.h
linux-user/x86_64/target_signal.h
linux-user/x86_64/termbits.h
pc-bios/optionrom/optionrom.h
slirp/mbuf.h
slirp/misc.h
slirp/sbuf.h
slirp/tcp.h
slirp/tcp_timer.h
slirp/tcp_var.h
target/i386/svm.h
target/sparc/asi.h
target/xtensa/core-dc232b/xtensa-modules.inc.c
target/xtensa/core-dc233c/xtensa-modules.inc.c
target/xtensa/core-de212/core-isa.h
target/xtensa/core-de212/xtensa-modules.inc.c
target/xtensa/core-fsf/xtensa-modules.inc.c
target/xtensa/core-sample_controller/core-isa.h
target/xtensa/core-sample_controller/xtensa-modules.inc.c
target/xtensa/core-test_kc705_be/core-isa.h
target/xtensa/core-test_kc705_be/xtensa-modules.inc.c
tests/tcg/cris/check_abs.c
tests/tcg/cris/check_addc.c
tests/tcg/cris/check_addcm.c
tests/tcg/cris/check_addoq.c
tests/tcg/cris/check_bound.c
tests/tcg/cris/check_ftag.c
tests/tcg/cris/check_int64.c
tests/tcg/cris/check_lz.c
tests/tcg/cris/check_openpf5.c
tests/tcg/cris/check_sigalrm.c
tests/tcg/cris/crisutils.h
tests/tcg/cris/sys.c
tests/tcg/i386/test-i386-ssse3.c
ui/vgafont.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181213223737.11793-3-pbonzini@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are not many, and they are all simple mistakes that ended up
being committed. Remove them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181213223737.11793-2-pbonzini@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Test R5900 three-operand MADDU1.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Test R5900 three-operand MADDU.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Test R5900 three-operand MADD1.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Test R5900 three-operand MADD.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
As "xchg" reads and writes both operands, the "+m" is required to avoid
undefined behavior on -O2 compilation.
Signed-off-by: Fabrice Desclaux <fabrice.desclaux@cea.fr>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <03506cf0-a204-f619-8ee4-4990a5e69af5@cea.fr>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fix:
TEST linux-test on i386
.../tests/tcg/multiarch/linux-test.c:201: readdir
readdir() calls getdents64() to have the list of the entries in a
directory, and getdents64() can return 64bit d_off values (with ext4,
for instance) that will not fit in the 32bit d_off field of the
readdir() dirent structure.
To avoid that, use readdir64() to use a 64bit d_off field too.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Fix also a grammar issue.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20180713054755.23323-1-sw@weilnetz.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Point to the right and obvious location for lm32 tests.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20181004161852.11673-3-crosa@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add a test for DIVU1.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a test for DIV1.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a test for MTLO1 and MTHI1.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a test for MFLO1 and MFHI1.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a test for MULTU1.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a test for MULT1.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a test for MULTU.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a test for MULT.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Don't generate handlers for IRQ levels that are not defined for the CPU
or for window overflow/underflow exceptions for configs w/o windowed
registers.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Not all CPU configurations may have enough space for handler code
between exception/interrupt vectors. Leave jumps to the handlers at the
vectors, but move all handlers past the vectors area.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Failed memory transactions should raise exceptions 14 (for fetch) or 15
(for load/store) with XEA2.
Memory accesses that result in TLB miss followed by an attempt to load
PTE from physical memory which fails should raise InstTLBMiss or
LoadStoreTLBMiss with XEA2.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
PACK fails on the test from the Principles of Operation: F1F2F3F4
becomes 0000234C instead of 0001234C due to an off-by-one error.
Furthermore, it overwrites one extra byte to the left of F1.
If len_dest is 0, then we only want to flip the 1st byte and never loop
over the rest. Therefore, the loop condition should be > and not >=.
If len_src is 1, then we should flip the 1st byte and pack the 2nd.
Since len_src is already decremented before the loop, the first
condition should be >=, and not >.
Likewise for len_src == 2 and the second condition.
Signed-off-by: Pavel Zbitskiy <pavel.zbitskiy@gmail.com>
Message-Id: <20180821025104.19604-7-pavel.zbitskiy@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Improves "b213c9f5: target/s390x: Implement TRTR" by introducing the
intermediate functions, which are compatible with dx_helper type.
Signed-off-by: Pavel Zbitskiy <pavel.zbitskiy@gmail.com>
Message-Id: <20180821025104.19604-6-pavel.zbitskiy@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Suppose psw.mask=0x0000000080000000, cc=2, r1=0 and we do "ipm 1".
This command must touch only bits 32-39, so the expected output
is r1=0x20000000. However, currently qemu yields r1=0x20008000,
because irrelevant parts of PSW leak into r1 during program mask
transfer.
Signed-off-by: Pavel Zbitskiy <pavel.zbitskiy@gmail.com>
Message-Id: <20180821025104.19604-5-pavel.zbitskiy@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
CSST is defined as:
C(0xc802, CSST, SSF, CASS, la1, a2, 0, 0, csst, 0)
It means that the first parameter is handled by in1_la1().
in1_la1() fills addr1 field, and not in1.
Furthermore, when extract32() is used for the alignment check, the
third parameter should specify the number of trailing bits that must
be 0. For FC these numbers are:
FC=0 (word, 4 bytes): 2
FC=1 (double word, 8 bytes): 3
FC=2 (quad word, 16 bytes): 4
For SC these numbers correspond to the size:
SC=0: 0
SC=1: 1
SC=2: 2
SC=3: 3
SC=4: 4
Signed-off-by: Pavel Zbitskiy <pavel.zbitskiy@gmail.com>
Message-Id: <20180821025104.19604-4-pavel.zbitskiy@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This adds a test to make sure we fail properly for a 0 length mmap.
There are most likely other failure conditions we should also check.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: umarcor <1783362@bugs.launchpad.net>
Message-Id: <20180730134321.19898-3-alex.bennee@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The combination of being rather esoteric and needing to support mmap @
0 means this only ever worked under translation. It has now regressed
even further and is no longer useful. Kill it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
One problem with satisfying your docker dependencies in a sub-make it
you might end up trying to satisfy the dependency multiple times. This
is especially a problem with debian-sid based cross compilers and CI
setups. We solve this by doing a docker build pass at the top level
before any sub-makes are called.
We still need to satisfy dependencies in the Makefile.target call so
people can run tests from individual target directories. We introduce
a new Makefile.probe which gets called for each PROBE_TARGET and
allows us to build up the list. It does require multiply including
config-target.mak which shouldn't cause any issues as it shouldn't
define anything that clashes with config-host.mak. However we undefine
a few key variables each time around.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The Travis hardware can be a little slow and the runcom test is fairly
heavy in calculating pi. Lets double the timeout so we don't trip up
during CI by mistake.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
To get a clean run of check-tcg these tests are currently skipped:
- hello-mips for mips
- linux-test for sparc
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
As we aren't using the default runners for all the test cases it is
easy to miss out things like timeouts. To help with this we add some
helpers and use them so we only need to make core changes in one
place.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Now all the build infrastructure is in place we can build tests for
each guest that we support. That support mainly depends on having
cross compilers installed or docker setup. To keep all the logic for
that together we put the rules in tests/tcg/Makefile.include and
include it from the main Makefile.target.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This make is now invoked from each individual target make with the
appropriate CC and EXTRA_CFLAGS set for each guest. It then includes
additional Makefile.targets from:
- tests/tcg/multiarch (always)
- tests/tcg/$(TARGET_BASE_ARCH) (if available)
- tests/tcg/$(TARGET_NAME)
The order is important as the later Makefile's may want to suppress
TESTS from its base arch profile. Each included Makefile.target is
responsible for adding TESTS as well as defining any special build
instructions for individual tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Now we have restored debian-image-powerpc-cross using Debian SID
compilers we can build for 32 bit powerpc. Although PPC32 supports a
range of pages sizes currently only 4k works so the others are
commented out for now.
We can also merge the ppc64 support under the base architecture
directory to avoid too much proliferation of directories.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
As before, using Debian SID compilers.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
As before, using Debian SID compilers.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
As before, using Debian SID compilers.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
As before, using Debian SID compilers. While the compiler can be
coerced into generating big-endian code it seems the linker can't deal
with it so we only enable the building for little endian SH4.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
As before, using Debian SID compilers.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
These tests did use their own crt.o stub however that is a little
stone age so we drop crt.S and just statically link to the cross
compilers libraries.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
We can't use our normal Debian based compilers as Alpha isn't an
officially supported architecture. However it is available as a port
and fortunately cross compilers for all these targets are included in
Debian Sid, the perpetual rolling/unstable/testing version of Debian.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Currently this just enables building the multiarch tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This doesn't add any additional tests but enables building the
multiarch tests for s390x.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This doesn't add any additional tests but enables building the
multiarch tests for MIPS using docker cross compilers. We don't have a
cross compiler for mips64 big endian though.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
These only need to be built for MIPS guests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This runs through the usual float to float conversions and crucially
also runs with ARM Alternative Half Precision Format.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
We only have compilers for the (default) little endian variants.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
We need to rename the source file to a .S so we can do a single-line
assemble and link invocation. We also specify the additional CFLAGS
for the compile as it's a non-standard ARM binary.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
[rth: force fpu configuration]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This allows us to use the docker cross compiler image to build these
tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
These only need to be built for ARM guests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The compiler complains about the old __mode__ style attributes.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The sources for x86_64 are shared in the i386 directory which will be
included thanks to TARGET_BASE_ARCH. However not all sources build so
we need to filter out the ones we can't build in the 64 bit world and
those that can't be built for 32 bit.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The runner needs to compare against a reference run. We also only run
this test when SPEED=slow as it takes a while.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
We don't include anything from qemu itself for the build.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We have -Werror=missing-prototype, add a dummy prototype to avoid that
warning.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
While you can construct a compile command that does work using the
x86_64 host compiler that most people use this is flakey. Different
distros handle this is different ways so we default to using a known
good i386 compiler via docker.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
These only need to be built for i386 guests. This includes a stub
tests/tcg/i386/Makfile.target which absorbs some of what was in
tests/tcg/Makefile.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The default test run outputs to stdout so it can be re-directed.
Errors are still reported to stderr.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The fixed path and ports get in the way of running our tests and
builds in parallel. Instead of using TESTPATH we use mkdtemp() and
instead of a fixed port we allow the kernel to assign one and query it
afterwards.
Ideally test directory creation should be common functionally across
all TCG tests but this could complicate an already huge patch series
so we mark it as a TODO for next time.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Un-comment the remaining tests.
I removed the itimer value tests because I'm fairly sure a re-arming
timer will always have a different value in it when you grab it.
I've also fixed up the clone thread flags as QEMU will only allow a
clone to use flags which match glibc. However the test is still racey
so it remains disabled by default - it can be run by passing any
additional parameters on the command line.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
To keep the compiler happy, and to fit in our buildsys flags:
- Make local functions "static"
- #ifdef out unused functions
- drop cutils/osdep dependencies
Signed-off-by: Fam Zheng <famz@redhat.com>
[AJB: drop cutils/osdep dependencies]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We will want to build these for all supported guest architectures so
lets move them all into one place. We also drop test_path at this
point because it needs qemu utils and glib bits which is hard to
support for cross compiling.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The value of CCOUNT special register is calculated as time elapsed
since CCOUNT == 0 multiplied by the core frequency. In icount mode time
increment between consecutive instructions that don't involve time
warps is constant, but unless the result of multiplication of this
constant by the core frequency is a whole number the CCOUNT increment
between these instructions may not be constant. E.g. with icount=7 each
instruction takes 128ns, with core clock of 10MHz CCOUNT values for
consecutive instructions are:
502: (128 * 502 * 10000000) / 1000000000 = 642.56
503: (128 * 503 * 10000000) / 1000000000 = 643.84
504: (128 * 504 * 10000000) / 1000000000 = 645.12
I.e.the CCOUNT increments depend on the absolute time. This results in
varying CCOUNT differences for consecutive instructions in tests that
involve time warps and don't set CCOUNT explicitly.
Change frequency of the core used in tests so that clock cycle takes
exactly 64ns. Change icount power used in tests to 6, so that each
instruction takes exactly 1 clock cycle. With these changes CCOUNT
increments only depend on the number of executed instructions and that's
what timer tests expect, so they work correctly.
Longer story:
http://lists.nongnu.org/archive/html/qemu-devel/2018-03/msg04326.html
Cc: Pavel Dovgaluk <Pavel.Dovgaluk@ispras.ru>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
The point of writing a macro embedded in a 'do { ... } while (0)'
loop (particularly if the macro has multiple statements or would
otherwise end with an 'if' statement) is so that the macro can be
used as a drop-in statement with the caller supplying the
trailing ';'. Although our coding style frowns on brace-less 'if':
if (cond)
statement;
else
something else;
that is the classic case where failure to use do/while(0) wrapping
would cause the 'else' to pair with any embedded 'if' in the macro
rather than the intended outer 'if'. But conversely, if the macro
includes an embedded ';', then the same brace-less coding style
would now have two statements, making the 'else' a syntax error
rather than pairing with the outer 'if'. Thus, even though our
coding style with required braces is not impacted, ending a macro
with ';' makes our code harder to port to projects that use
brace-less styles.
The change should have no semantic impact. I was not able to
fully compile-test all of the changes (as some of them are
examples of the ugly bit-rotting debug print statements that are
completely elided by default, and I didn't want to recompile
with the necessary -D witnesses - cleaning those up is left as a
bite-sized task for another day); I did, however, audit that for
all files touched, all callers of the changed macros DID supply
a trailing ';' at the callsite, and did not appear to be used
as part of a brace-less conditional.
Found mechanically via: $ git grep -B1 'while (0);' | grep -A1 \\\\
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20171201232433.25193-7-eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
memctl SR is not available on dc232b, as it was introduced in more
recent hardware release. Now that this information is available through
the libisa the test fails. Fix the test.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
glibc used to have:
typedef struct ucontext { ... } ucontext_t;
glibc now has:
typedef struct ucontext_t { ... } ucontext_t;
(See https://sourceware.org/bugzilla/show_bug.cgi?id=21457
for detail and rationale for the glibc change)
However, QEMU used "struct ucontext" in declarations. This is a
private name and compatibility cannot be guaranteed. Switch to
only using the standardized type name.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Message-id: 20170628204452.41230-1-raj.khem@gmail.com
Cc: Kamil Rytarowski <kamil@netbsd.org>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Laurent Vivier <laurent@vivier.eu>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[PMM: Rewrote commit message, based mostly on the one from
Nathaniel McCallum]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
POSIX says that backslashes in the arguments to 'echo', as well as
any use of 'echo -n' and 'echo -e', are non-portable; it recommends
people should favor 'printf' instead. This is definitely true where
we do not control which shell is running (such as in makefile snippets
or in documentation examples). But even for scripts where we
require bash (and therefore, where echo does what we want by default),
it is still possible to use 'shopt -s xpg_echo' to change bash's
behavior of echo. And setting a good example never hurts when we are
not sure if a snippet will be copied from a bash-only script to a
general shell script (although I don't change the use of non-portable
\e for ESC when we know the running shell is bash).
Replace 'echo -n "..."' with 'printf %s "..."', and 'echo -e "..."'
with 'printf %b "...\n"', with the optimization that the %s/%b
argument can be omitted if the string being printed is a strict
literal with no '%', '$', or '`' (we could technically also make
this optimization when there are $ or `` substitutions but where
we can prove their results will not be problematic, but proving
that such substitutions are safe makes the patch less trivial
compared to just being consistent).
In the qemu-iotests check script, fix unusual shell quoting
that would result in word-splitting if 'date' outputs a space.
In test 051, take an opportunity to shorten the line.
In test 068, get rid of a pointless second invocation of bash.
CC: qemu-trivial@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170703180950.9895-1-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Don't use hardcoded software interrupt masks, use XCHAL macros.
Mask off timer interrupt bits that are not checked for.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Don't expect that CCOUNT increments are equal to the number of executed
instructions. Verify that timer interrupt does not fire before the
programmed CCOMPARE value and does fire after.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Timer tests expect certain determinism in CCOUNT updates and timer
interrupts firing. Run QEMU with -icount to get deterministic results.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
We've currently got 18 architectures in QEMU, and thus 18 target-xxx
folders in the root folder of the QEMU source tree. More architectures
(e.g. RISC-V, AVR) are likely to be included soon, too, so the main
folder of the QEMU sources slowly gets quite overcrowded with the
target-xxx folders.
To disburden the main folder a little bit, let's move the target-xxx
folders into a dedicated target/ folder, so that target-xxx/ simply
becomes target/xxx/ instead.
Acked-by: Laurent Vivier <laurent@vivier.eu> [m68k part]
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> [tricore part]
Acked-by: Michael Walle <michael@walle.cc> [lm32 part]
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x part]
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [s390x part]
Acked-by: Eduardo Habkost <ehabkost@redhat.com> [i386 part]
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [sparc part]
Acked-by: Richard Henderson <rth@twiddle.net> [alpha part]
Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa part]
Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ppc part]
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [crisµblaze part]
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32 part]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a test for the newly implemented ADDC instruction in the v17 CRIS
CPU.
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
This test, borrowed from the GDB simulator test suite, checks that every
syscall increments the time returned by gettimeofday() by exactly 1 ms.
This is not guaranteed or even desirable on QEMU so remove this test.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
This test, borrowed from the GDB simulator test suite, is meant to test
the GDB simulator's --sysroot feature and always fails in QEMU. Remove
it. openpf3 tests the same sequence of system calls (without assuming
the precence of --sysroot).
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Add the appropriate register constraints for the inline asm for the
write and exit system calls. Without the correct constraints for the
write() function, correct failure messages are not printed succesfully
on newer version of GCC.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
The CRIS tests expect that functions marked inline are always inline.
With newer versions of GCC, building them results warnings like the
following and spurious failures when they are run.
In file included from tests/tcg/cris/check_moveq.c:5:0:
tests/tcg/cris/crisutils.h:66:20: warning: inlining failed in call to
'cris_tst_cc.constprop.0': call is unlikely and code size would grow [-Winline]
tests/tcg/cris/check_moveq.c:28:13: warning: called from here [-Winline]
Use the always_inline attribute when building them to fix this.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tracked down with an ugly, brittle and probably buggy Perl script.
Also move includes converted to <...> up so they get included before
ours where that's obviously okay.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Manually drop redundant includes that scripts/clean-includes misses,
e.g. because they're hidden in generator programs, or they use the
wrong kind of delimiter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A number of files were including signal.h but not using any
of the functions it provides
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Check that entry instruction raises window overflow exception when
PS.CALLINC points to live registers.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Xtensa cores have configurable interrupt vectors and endiannes. This
information is needed to link executable images correctly for a specific
core configuration. Instead of hard-coding dc232 defaults pull endianness,
number of high-priority interrupts and location of vectors from the core
configuration and pass it through the C preprocessor.
While at it clean up tabs and align the initial stack on 16 bytes.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
- fix cross-page jumps/calls at the end of TB;
- add tests for TBs and instructions crossing page boundary.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=4dqX
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/xtensa/tags/20140526-xtensa' into staging
Xtensa fixes queue 2014-05-26:
- fix cross-page jumps/calls at the end of TB;
- add tests for TBs and instructions crossing page boundary.
# gpg: Signature made Mon 26 May 2014 09:37:39 BST using RSA key ID F83FA044
# gpg: Can't check signature: public key not found
* remotes/xtensa/tags/20140526-xtensa:
target-xtensa: add tests for cross-page TB
target-xtensa: completely clean TLB between MMU tests
target-xtensa: fix cross-page jumps/calls at the end of TB
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make test cases independent from from each other. Eg. if a test case needs
a specific value in register A, don't rely on the fact that it is already
set by the preceding test case.
Signed-off-by: Michael Walle <michael@walle.cc>
The test_path binary is (unlike the other test binaries in tests/tcg)
actually intended to be compiled with the same compiler used to build
the main QEMU executables. It actually #includes a number of the
QEMU source files in an attempt to unit-test the util/path.c functions,
and so if it is not compiled with the same compiler used by configure
to set CONFIG_ settings then it is liable to fail to build.
Fix the makefile to build it with the default C compiler rules, not
CC_I386, and fix the test itself not to include a lot of unnecessary
trace related source files which cause the build to fail if the trace
backend is anything other than 'simple'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
'make test' is broken at least since commit
baacf04799. Several source files were moved
to util/, and some of them there split, so add the missing prefix and new
files to fix the compiler and linker errors.
There remain more issues, but these changes allow running the test on a
Linux i686 host.
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Test that non-locking prefetch operations don't cause exceptions on
missing TLB and that other 'hit' cache operations do.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Add path to the core configuration directory to test build command and
replace .include asm directive with #include to enable preprocessing.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Some test suites, like MMU, need per-test initialization. Don't make them
redefine test macro, add test_init for that purpose.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Introduce new target "check_%" to run individual test caes, eg.
make check_mmu
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
The test cases did not correctly test for the carry flag.
Signed-off-by: Sebastian Macke <sebastian@macke.de>
Reviewed-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Jia Liu <proljc@gmail.com>
Five tests files for DSP instructions had wrong expected values in the tests.
This change fixes this, and this has been cross-checked by running the same
test binaries on Malta 74K board.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Multiplication of two fractional word elements is not correct when sign
extension/promotion is needed. This change fixes it by adding correct
casts from unsigned to signed values.
In addition, the tests (dpaq_sa_l_w.c and dpsq_sa_l_w.c) have been extended
to trigger the current issue.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This change corrects rounding and saturation of Q31 fractional value in
mipsdsp_trunc16_sat16_round(). Overflow detection was incorrect for the
corner case for PRECRQ_RS.PH, and this test case is also part of the change.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Multiplication of Q15 fractional halfword vectors was incorrect in the
previous implementation of mipsdsp_rndq15_mul_q15_q15. It failed to take
element signs into account. This change fixes it, and it adds a test case
for it.
The change also removes unnecessary cast in the function
mipsdsp_mul_q15_q15_overflowflag21().
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
# By Christophe Lyon (1) and others
# Via Michael Tokarev
* mjt/trivial-patches:
target-moxie: replace target_phys_addr_t with hwaddr
Rename hexdump to avoid FreeBSD libutil conflict
remove some double-includes
translate: remove redundantly included qemu/timer.h
Remove twice include of qemu-common.h
fix /proc/self/maps output
Message-id: 51977B44.1000302@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This change makes sure that modifications of pos field in the DSPControl
register do not trash other bits in the register. This bug can be triggered
with the additional test case in mips32-dsp/extpdp.c in this commit.
In addition to this, this change corrects incorrect calculation of the mask
for EXTPDP.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Some source files #include the same header more than
once for no good reason. Remove second #includes in
such cases.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The mask for EXTP instruction when size=31 has not been correctly
calculated.
The test (mips32-dsp/extp.c) has been extended to include the case that
triggers the issue.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Corner case for INSV instruction when size=32 has not been correctly
implemented. The mask for size should be one bit wider, and preparing the
filter variable should be aware of this case too.
The test for INSV has been extended to include the case that triggers the
bug.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This change corrects and simplifies how discard is calculated for shift
left logical vector instructions. It is used to detect overflow and set bit
22 in the DSPControl register.
The existing tests (shll_ph.c, shll_qb.c) are extended with the corner cases
that expose incorrectness in the previous implementation.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The operands for MAQ_SA_W.PHL/MAQ_SA_W.PHR must in specified format.
Otherwise, the results are unpredictable. Once the operands were corrected
in the tests (part of this change), a bug in mipsdsp_mul_q15_q15 became
visible.
This change corrects the tests for MAQ_SA_W.PHL/MAQ_SA_W.PHR and fixes
sign-related issue in mipsdsp_mul_q15_q15. It also removes unnecessary
comment.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Fix for rndrashift_short_acc to set correct value to higher 64 bits.
This change also corrects conditions when bit 23 of the DSPControl register
is set.
The existing test files have been extended with several examples that
trigger the issues. One bug/example in the test file for EXTR_RS_W has been
found and reported by Klaus Peichl.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The previous implementation incorrectly used same macro to detect overflow
for addition and subtraction. This patch makes distinction between these
two, and creates separate macros. The affected routines are changed
accordingly.
This change also includes additions to the existing tests for SUBQ_S_PH and
SUBQ_S_W that would trigger the fixed issue, and it removes dead code from
the test file. The last test case in subq_s_w.c is a bug found/reported/
isolated by Klaus Peichl from Dolby.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Correct sign-propagation before multiplication in MULQ_W helper.
The change also fixes previously incorrect expected values in the
tests for MULQ_RS.W and MULQ_S.W.
Signed-off-by: Petar Jovanovic <petarj@mips.com>
Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The change corrects sign-related issue with MULQ_S.PH. It also includes
extension to the already existing test which will trigger the issue.
Signed-off-by: Petar Jovanovic <petarj@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The pos field in the DSPControl register is not correctly initialized.
Per documentation, the result of MTHLIP is unpredictable if the value of the
pos field before the execution is greater than 32.
Signed-off-by: Petar Jovanovic <petarj@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Helper function for dpa_w_ph, dpax_w_ph, dps_w_ph and dpsx_w_ph incorrectly
defines halfword vector elements as unsigned values. This results in wrong
output which is not triggered in the tests as they also follow this logic.
Signed-off-by: Petar Jovanovic <petarj@mips.com>
Reviewed-by: Eric Johnson <ericj@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The change removes some unnecessary and incorrect code for EXTR_S.H.
Further, it corrects the mask for shift value in the EXTR_ instructions. It also
extends the existing tests so they trigger the issues corrected with the change.
Signed-off-by: Petar Jovanovic <petarj@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Upper 4 bits of ccond (bits 31..28 ) of DSPControl register are not used in
the MIPS32 architecture. They are used in the MIPS64 architecture. For MIPS32
these bits must be written as zero, and return zero on read.
The change fixes writes (WRDSP) and reads (RDDSP) to the register. It also fixes
the tests that use these instructions, and makes them smaller and simpler.
Signed-off-by: Petar Jovanovic <petarj@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
helper_shilo has not been shifting an accumulator value correctly for negative
values in 'shift' field. Minor optimization for shift=0 case.
This change also adds tests that will trigger issue and check for regressions.
Signed-off-by: Petar Jovanovic <petarj@mips.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Eric Johnson <ericj@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Content of register rs should be shifted for pos before applying a mask.
This change contains both fix for the instruction and to the existing test.
Signed-off-by: Petar Jovanovic <petarj@mips.com>
Reviewed-by: Eric Johnson <ericj@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This is setting the stage for a cleanup of FPREM and FPREM1 helpers while being
sure that they behave same as bare metal.
The test constructs operands using combinations of corner cases for the
floating-point bitfields and prints operands, result and FPU status word for
FPREM and FPREM1. The outputs can then be compared between bare metal and QEMU.
The 'run-test-i386-fprem' make target does just that.
Signed-off-by: Catalin Patulea <catalinp@google.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
With i386-linux-user target on x86_64 host, this does not introduce any new test
failures.
Signed-off-by: Catalin Patulea <catalinp@google.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This broke when the tests were moved from tests/ to tests/tcg/.
On x86_64 host/i386-linux-user non-kvm guest, test-i386 and test-mmap are broken, but at least they build.
To build/run the tests:
$ cd $BUILD_PATH/tests/tcg
$ SRC_PATH=path/to/qemu make <target>
Signed-off-by: Catalin Patulea <catalinp@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
These were identified using: http://github.com/lyda/misspell-check
and run like this to create a bourne shell script using GNU sed's
-i option:
git ls-files|grep -vF .bin | misspellings -f - |grep -v '^ERROR:' |perl \
-pe 's/^(.*?)\[(\d+)\]: (\w+) -> "(.*?)"$/sed -i '\''${2}s!$3!$4!'\'' $1/'
Manually eliding the FP, "rela->real" and resolving "addres" to
address (not "adders") we get this:
sed -i '450s!thru!through!' Changelog
sed -i '260s!neccessary!necessary!' coroutine-sigaltstack.c
sed -i '54s!miniscule!minuscule!' disas.c
sed -i '1094s!thru!through!' hw/usb/hcd-ehci.c
sed -i '1095s!thru!through!' hw/usb/hcd-ehci.c
sed -i '21s!unecessary!unnecessary!' qapi-schema-guest.json
sed -i '307s!explictly!explicitly!' qemu-ga.c
sed -i '490s!preceeding!preceding!' qga/commands-posix.c
sed -i '792s!addres!address!' qga/commands-posix.c
sed -i '6s!beeing!being!' tests/tcg/test-mmap.c
Also, manually fix "arithmentic", spotted by Peter Maydell:
sed -i 's!arithmentic!arithmetic!' coroutine-sigaltstack.c
Signed-off-by: Jim Meyering <meyering@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
