trivial: initialize the dirty buffer with a random-ish byte.
Stops valgrind from whining about uninitialized buffers.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Some tests use the "-vnc none" option without any clear reason,
making those tests break when --disable-vnc is specified on
./configure. Remove the unnecessary option.
Reviewed-by: John Snow <jsnow@redhat.com>
Tested-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The usual use model for the libqos PCI functions is to map a specific PCI
BAR using qpci_iomap() then pass the returned token into IO accessor
functions. This, and the fact that iomap() returns a (void *) which
actually contains a PCI space address, kind of suggests that the return
value from iomap is supposed to be an opaque token.
..except that the callers expect to be able to add offsets to it. Which
also assumes the compiler will support pointer arithmetic on a (void *),
and treat it as working with byte offsets.
To clarify this situation change iomap() and the IO accessors to take
a definitely opaque BAR handle (enforced with a wrapper struct) along with
an offset within the BAR. This changes both the functions and all the
callers.
There were a number of places that checked if iomap() returned non-NULL,
and or initialized it to NULL before hand. Since iomap() already assert()s
if it fails to map the BAR, these tests were mostly pointless and are
removed.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
ide-test uses many explicit inb() / outb() operations for its IO, which
means it's not portable to non-x86 platforms. This cleans it up to use
the libqos PCI accessors instead.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Due to changes in flush behaviour clean disks stopped generating
flush_to_disk events and IDE and AHCI tests that test flush commands
started to fail.
This change adds additional DMA writes to affected tests before sending
flush commands so that bdrv_flush actually generates flush_to_disk event.
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1468870792-7411-4-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Remove glib.h includes, as it is provided by osdep.h.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Move it to the actual users. There are still a few includes of
qemu/bswap.h in headers; removing them is left for future work.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-17-git-send-email-peter.maydell@linaro.org
We have several function parameters declared as void (*fn). This is
just a stupid way to write void *, and the only purpose writing it
like that could serve is obscuring the sin of bypassing the type
system without need.
The original sin is commit 49ee359: its qtest_add_func() is a wrapper
for g_test_add_func(). Fix the parameter type to match
g_test_add_func()'s. This uncovers type errors in ide-test.c; fix
them.
Commit 7949c0e faithfully repeated the sin for qtest_add_data_func().
Fix it the same way, along with a harmless type error uncovered in
vhost-user-test.c.
Commit 063c23d repeated it for qtest_add_abrt_handler(). The screwy
parameter gets assigned to GHook member func, so change its type to
match. Requires wrapping kill_qemu() to keep the type checker happy.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[AF/armbru: Inline GTestFunc/GTestDataFunc typedef for old GLib]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Use explicit timeouts instead of trying to approximate it by counting
the cumulative duration of nsleep calls.
In practice, the timeout if inb() dwarfed the nsleep delays, and as a
result the real timeout value became a lot larger than 5 seconds.
So: change the semantics from "Not sooner than 5 seconds" to "no more
than 5 seconds" to ensure we don't hang the tester for very long.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1448393771-15483-2-git-send-email-jsnow@redhat.com
Final tidying: move the interrupt wait into the loop,
document that the status read clears the IRQ, and move
the final interrupt check outside of the loop.
This should be functionally equivalent to how it works
currently, but a little less ambiguous and slightly more
explicit about the state transitions.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1448060035-31973-3-git-send-email-jsnow@redhat.com
The check for the cleared BSY flag has to be performed
before each data transfer and not just before the
first one.
Commit 5f81724d revealed this glitch as the BSY flag
was not set in ATAPI PIO transfers before.
While at it fix the descriptions and add a comment before
the nested for loop that transfers the data.
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-id: 1448029742-19771-1-git-send-email-pl@kamp.de
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
New convenience function hmp() to facilitate use of
human-monitor-command in tests. Use it to simplify its existing uses.
To blend into existing libqtest code, also add qtest_hmpv() and
qtest_hmp(). That, and the egregiously verbose GTK-Doc comment format
make this patch look bigger than it is.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1443689999-12182-7-git-send-email-armbru@redhat.com>
The existing short PRDT test case does not transfer any data because the
first PRD is less than 1 sector.
This patch adds another short PRDT test case where the first sector can
be read but the PRDT is still smaller than the requested number of
sectors. This exercises a different code path in ide_dma_cb().
Cc: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1435770571-9906-1-git-send-email-stefanha@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
This patch adds tests for werror and rerror functionality
for the PCI and ISA ide buses.
Tests for the AHCI device are to be included at a later
date after requisite patches have been merged upstream
to support needed functionality by the tests.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1424708286-16483-18-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1416497234-29880-5-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use the new call to pc_alloc_uninit
as a test for the new pathways.
The leak checking / assert pathways are
not enabled in this patch, leaving this
as an option to future test writers.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
For libqos debugging purposes, it's nice to
be able to assert that tests and associated libraries
have no memory leaks. To that end, free up the
trivial cmdline leak.
The remaining leaks caused by pc_alloc_init are fixed
instead by my first-fit pc_alloc implementation already
on the qemu-devel mailing list.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch allows qpci_iomap to return the size of the
BAR mapping that it created, to allow driver applications
(e.g, ahci-test) to make determinations about the suitability
or the mapping size, or in the specific case of AHCI, how
many ports are supported by the HBA.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When we disable vnc from "./configure", QEMU can't use the vnc option.
So qtest can't use the "vnc -none ", otherwise "make check" fails.
If QEMU uses "-display none", "-vnc none" is excrescent, So we just need to drop it.
Signed-off-by: Kewei Yu <keweihk@gmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Existing qmp() callers do not expect a response object. In order to
implement real QMP test cases it will be necessary to inspect the
response object.
Rename qmp() to qmp_discard_response(). Later patches will introduce a
qmp() function that returns the response object and tests that use it.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1371711329-9144-3-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
bd07684aac added a test to ensure BSY
flag is set when a flush request is in flight. It does this by setting
a blkdebug breakpoint on flush_to_os before issuing a CMD_FLUSH_CACHE.
It then resumes CMD_FLUSH_CACHE operation and checks that BSY is unset.
The actual unsetting of BSY does not occur until ide_flush_cb gets
called in a bh, however, so in some cases this check will race with
the actual completion.
Fix this by polling the ide status register until BSY flag gets unset
before we do our final sanity checks. According to
f68ec8379e this is in line with how a guest
would determine whether or not the device is still busy.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This checks in particular that BSY is set while the flush request is in
flight.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The test case passes on big endian hosts now (tested on ppc64)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1368622839-7084-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This tests the behaviour of the DMA engine when the given PRDT contains
physical region descriptors for either more or less bytes than the
IDE request is for.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a simple IDE test case and starts by verifying that IDENTIFY
can be successfully used and return the correct serial number, version
and the WCE flag is set for cache=writeback.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
