Commit Graph

140 Commits

Author SHA1 Message Date
Blue Swirl
49a2942d9b Delete write only variables
Compiling with GCC 4.6.0 20100925 produced warnings like:
/src/qemu/net/tap-win32.c: In function 'tap_win32_open':
/src/qemu/net/tap-win32.c:582:12: error: variable 'hThread' set but not used [-Werror=unused-but-set-variable]

Fix by removing the unused variables.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-13 18:41:29 +00:00
Stefan Weil
8b7968f7c4 Use GCC_FMT_ATTR (format checking)
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-03 06:34:51 +00:00
Stefan Weil
f36d53ef6c mips_malta: Fix format strings
Fix two compiler warnings (when format attribute is applied).

Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-09-21 18:55:09 +00:00
Blue Swirl
2446333cd5 Rearrange block headers
Changing block.h or blockdev.h resulted in recompiling most objects.

Move DriveInfo typedef and BlockInterfaceType enum definitions
to qemu-common.h and rearrange blockdev.h use to decrease churn.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-24 15:22:24 +00:00
Alex Williamson
1724f04985 qemu_ram_alloc: Add DeviceState and name parameters
These will be used to generate unique id strings for ramblocks.  The name
field is required, the device pointer is optional as most callers don't
have a device.  When there's no device or the device isn't a child of
a bus implementing BusInfo.get_dev_path, the name should be unique for
the platform.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-07-06 10:36:28 -05:00
Blue Swirl
738012bec4 Remove useless device dependency of HAS_AUDIO
System architecture dictates whether HAS_AUDIO is defined. It's then
useless to check for HAS_AUDIO in files which are only used on those
architectures which always have audio.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-27 16:04:31 +00:00
Jan Kiszka
7d932dfdc5 hpet/rtc: Rework RTC IRQ replacement by HPET
Allow the intercept the RTC IRQ for the HPET legacy mode. Then push
routing to IRQ8 completely into the HPET. This allows to turn
hpet_in_legacy_mode() into a private function. Furthermore, this stops
the RTC from clearing IRQ8 even if the HPET is in control.

This patch comes with a side effect: The RTC timers will no longer be
stoppend when there is no IRQ consumer, possibly causing a minor
performance degration. But as the guest may want to redirect the RTC to
the SCI in that mode, it should normally disable unused IRQ source
anyway.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-13 15:33:00 +03:00
Blue Swirl
4556bd8b25 Compile dma only once
Use a qemu_irq to request CPU exit.

7 compilations less for the full build.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-22 08:00:52 +00:00
Isaku Yamahata
1d914fa0af rtc: make rtc_xxx accept/return ISADevice instead of RTCState.
To match rtc_xxx with qdev, make rtc_xxx accept and return ISADevice
instead of RTCState.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15 16:21:49 +00:00
Blue Swirl
3d08ff698b Compile pflash_cfi01 only once
Push TARGET_WORDS_BIGENDIAN dependency to board level.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29 19:23:56 +00:00
Blue Swirl
53b67b3052 Compile acpi only once
Use qemu_irqs to trigger CMOS S3 and SMI events.

Avoid using kvm.h, which uses CPUState.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-29 19:23:52 +00:00
Blue Swirl
b970ea8f8d Compile some MIPS devices only once
Move CPU specific declarations to a separate file.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-27 07:26:16 +00:00
Blue Swirl
2d48377a85 Compile serial only once
Push TARGET_WORDS_BIGENDIAN dependency to board level.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-21 19:47:11 +00:00
Aurelien Jarno
409dbce54b load_elf: replace the address addend by a translation function
A few machines need to translate the ELF header addresses into physical
addresses. Currently the only possibility is to add a value to the
addresses.

This patch replaces the addend argument by and a translation function
and an opaque passed to the function. A NULL function does not translate
the address.

The patch also convert all machines that have an addend, simplify the
PowerPC kernel loading and fix the MIPS kernel loading using this new
feature. Other machines may benefit from this feature.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-16 08:38:05 +01:00
Blue Swirl
5c02c03348 fdc: don't use reserved _t suffix
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-07 09:01:18 +00:00
Aurelien Jarno
5c43485f1b mips/malta: fix typo
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-06 17:14:24 +01:00
Michael S. Tsirkin
18e08a5529 pci: pci.h cleanup: move out stuff not in pci.c
pci.h declares some functions which aren't
defined in pci.h. Clean up moving things
to appropriate headers, and update all users.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-12-01 17:51:04 +02:00
Aurelien Jarno
593c0d103c mips malta: fix indentation
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-11-14 13:10:43 +01:00
Aurelien Jarno
c938ada244 mips-malta: fix reset
(broken by 45a50b1668)

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-11-14 13:04:29 +01:00
Aurelien Jarno
e16ad5b044 mips: fix CPU reset
Don't load the kernel twice during reset.
See f2d7497876.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-11-14 01:11:27 +01:00
Gerd Hoffmann
3c178e72e0 rom loader: fix sparc -kernel boot.
Changes:
(1) register pstrcpy_targphys() in rom list, it is used for kernel
command lines by a number of architectures.
(2) add rom_ptr() function to get a pointer for applying changes
to loaded images.  Needed for example to tell the linux kernel
where it finds the initrd image by updating the header.
(3) make sparc use rom_ptr for initrd setup.

booting sparc-test works now, and 'info roms' shows this:

(qemu) info roms
addr=0000000000000000 size=0x2a3828 mem=ram name="phdr #0: vmlinux-2.6.11+tcx"
addr=00000000007ff000 size=0x00000e mem=ram name="cmdline"
addr=0000000000800000 size=0x400000 mem=ram name="/root/qemu-test/sparc-test/linux.img"
addr=0000000070000000 size=0x0e4000 mem=rom name="phdr #0: /home/kraxel/projects/qemu/build-zfull/pc-bios/openbios-sparc32"

reboot via 'system_reset' works too.

Patchworks-ID: 35262
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-12 09:42:31 -05:00
Markus Armbruster
e23a1b33b5 New qdev_init_nofail()
Like qdev_init(), but terminate program via hw_error() instead of
returning an error value.

Use it instead of qdev_init() where terminating the program on failure
is okay, either because it's during machine construction, or because
we know that failure can't happen.

Because relying in the latter is somewhat unclean, and the former is
not always obvious, it would be nice to go back to qdev_init() in the
not-so-obvious cases, only with proper error handling.  I'm leaving
that for another day, because it involves making sure that error
values are properly checked by all callers.

Patchworks-ID: 35168
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-07 08:54:54 -05:00
Markus Armbruster
07caea315a Fix pci_add nic not to exit on bad model
Monitor command "pci_add ADDR nic model=MODEL" uses pci_nic_init() to
create the NIC.  When MODEL is unknown or "?", this prints to stderr
and terminates the program.

Change pci_nic_init() not to treat "?" specially, and to return NULL
on failure.  Switch uses during startup to new convenience wrapper
pci_nic_init_nofail(), which behaves just like pci_nic_init() used to
do.

Bonus bug fix: we now check for qdev_init() failing there.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05 09:32:53 -05:00
Gerd Hoffmann
ac0be99800 serial: convert isa to qdev
Everything using standard isa I/O ports and IRQ windup is considerd
being an actual isa device.  That are all serial_init() users except
mips_mipssim() which seems to have a non-standard IRQ windup.

baud rate is fixed at 115200 now as no caller passed in something else.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05 09:32:50 -05:00
Gerd Hoffmann
fd8014e132 floppy: add drive properties.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05 09:32:49 -05:00
Gerd Hoffmann
021f067459 parallel: convert isa to qdev
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05 09:32:47 -05:00
Juan Quintela
5b7f53270a i2c: addresses are load/save as uint8_t values, change types to reflect this
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05 09:32:37 -05:00
Anthony Liguori
c227f0995e Revert "Get rid of _t suffix"
In the very least, a change like this requires discussion on the list.

The naming convention is goofy and it causes a massive merge problem.  Something
like this _must_ be presented on the list first so people can provide input
and cope with it.

This reverts commit 99a0949b72.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01 16:12:16 -05:00
malc
99a0949b72 Get rid of _t suffix
Some not so obvious bits, slirp and Xen were left alone for the time
being.

Signed-off-by: malc <av1474@comtv.ru>
2009-10-01 22:45:02 +04:00
Blue Swirl
284b08f174 Fix Sparse warning about obsolete struct initializer
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-21 19:50:05 +00:00
Blue Swirl
ca20cf32ab Compile loader only once
Callers must pass ELF machine, byte swapping and symbol LSB clearing
information to ELF loader. A.out loader needs page size information, pass
that too as a parameter.

Extract prototypes to a separate file. Move loader.[ch] and elf_ops.h under hw.

Adjust callers. Also use target_phys_addr_t instead of target_ulong for
addresses: loader addresses aren't virtual.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-20 14:58:02 +00:00
Aurelien Jarno
ffabf03718 mips malta: ensure that the serial ports are associated with a device
The serial ports should be present even if associated with a null device
as some firmware wants to initialize them.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-09-15 01:17:57 +02:00
Gerd Hoffmann
32e0c8260d qdev/isa: convert real time clock
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2009-09-10 19:48:01 +04:00
Gerd Hoffmann
2e15e23b8a qdev: simplify isa irq assignments
isa-bus owns the isa irqs now, so it can hand them out directly.
There is no need for the separate isa_connect_irqs step, drop it.

Also hard-code isa interrupts which can't be configured anyway.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2009-09-10 19:47:59 +04:00
Gerd Hoffmann
86c8615784 qdev: drop iobase properties from isa bus
Lot of ISA devices work at fixed addresses, so having iobase
as bus property doesn't make much sense.  Devices which can
have different iobases will get a device property.

Also simply hard-code stuff which can't be configured anyway.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2009-09-10 19:47:58 +04:00
Stefan Weil
ae027ad3c5 mips malta: Fix fdc regression and use qdev for i8042 setup
8baf73adf6 (qdev/isa: convert fdc)
breaks MIPS Malta:

Tried to create isa device isa-fdc with no isa bus present

Fix this by creating an isa bus for piix4.
This change also requires some more qdev related changes
(similar changes were applied to pc.c) and allows
cleaning of piix3/piix4 code.

Thanks to Gerd Hoffmann for his hints.

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-04 09:37:34 -05:00
Gerd Hoffmann
f455e98cf4 ide: pass down DriveInfo instead of BlockDriverState
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-04 09:37:27 -05:00
Gerd Hoffmann
977e1244e8 ide: split away ide-pci.c
create ide-pci.c and place pci bus support there.
only build ide-pci support for platforms using it.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>

Fix build (merge with isa mmio split)
2009-08-27 20:43:33 -05:00
Gerd Hoffmann
2091ba23e8 isa bus irq changes and fixes.
Changes:

  (1) make isa-bus maintain isa irqs, complain when allocating
      already taken irqs.
  (2) note that (1) works only for isa devices converted to qdev
      already (floppy and ps2/kbd/mouse right now), so more work
      is needed to make this really useful.
  (3) split floppy init into isa and sysbus versions.
  (4) add sysbus->isa bridge & fix -M isapc breakage.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27 20:30:11 -05:00
Blue Swirl
d60efc6b0d Make CPURead/WriteFunc structure 'const'
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-25 18:29:31 +00:00
Gerd Hoffmann
751c6a1704 kill drives_table
First step cleaning up the drives handling.  This one does nothing but
removing drives_table[], still it became seriously big.

drive_get_index() is gone and is replaced by drives_get() which hands
out DriveInfo pointers instead of a table index.  This needs adaption in
*tons* of places all over.

The drives are now maintained as linked list.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-27 14:08:23 -05:00
Gerd Hoffmann
ee6847d19b qdev: rework device properties.
This patch is a major overhaul of the device properties.  The properties
are saved directly in the device state struct now, the linked list of
property values is gone.

Advantages:
  * We don't have to maintain the list with the property values.
  * The value in the property list and the value actually used by
    the device can't go out of sync any more (used to happen for
    the pci.devfn == -1 case) because there is only one place where
    the value is stored.
  * A record describing the property is required now, you can't set
    random properties any more.

There are bus-specific and device-specific properties.  The former
should be used for properties common to all bus drivers.  Typical
use case is bus addressing, i.e. pci.devfn and i2c.address.

Properties have a PropertyInfo struct attached with name, size and
function pointers to parse and print properties.  A few common property
types have PropertyInfos defined in qdev-properties.c.  Drivers are free
to implement their own very special property parsers if needed.

Properties can have default values.  If unset they are zero-filled.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-16 17:28:51 -05:00
Jan Kiszka
a08d43677f Revert "Introduce reset notifier order"
This reverts commit 8217606e6e (and
updates later added users of qemu_register_reset), we solved the
problem it originally addressed less invasively.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29 14:18:08 -05:00
Markus Armbruster
5607c38820 Support addr=... in option argument of -net nic
Make net_client_init() accept addr=, put the value into struct
NICinfo.  Use it in pci_nic_init(), and remove arguments bus and
devfn.

Don't support addr= in third argument of monitor command pci_add,
because that clashes with its first argument.  Admittedly unelegant.

Machines "malta" and "r2d" have a default NIC with a well-known PCI
address.  Deal with that the same way as the NIC model: make
pci_nic_init() take an optional default to be used when the user
doesn't specify one.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-22 10:15:29 -05:00
Avi Kivity
1eed09cb4a Remove io_index argument from cpu_register_io_memory()
The parameter is always zero except when registering the three internal
io regions (ROM, unassigned, notdirty).  Remove the parameter to reduce
the API's power, thus facilitating future change.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16 15:18:37 -05:00
Paul Brook
5cea8590ea Use relative path for bios
Look for bios and other support files relative to qemu binary, rather than
a hardcoded prefix.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-30 01:59:37 +01:00
Paul Brook
02e2da45c4 Add common BusState
Implement and use a common device bus state.  The main side-effect is
that creating a bus and attaching it to a parent device are no longer
separate operations.  For legacy code we allow a NULL parent, but that
should go away eventually.

Also tweak creation code to veriry theat a device in on the right bus.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-23 00:13:41 +01:00
Jan Kiszka
8217606e6e Introduce reset notifier order
Add the parameter 'order' to qemu_register_reset and sort callbacks on
registration. On system reset, callbacks with lower order will be
invoked before those with higher order. Update all existing users to the
standard order 0.

Note: At least for x86, the existing users seem to assume that handlers
are called in their registration order. Therefore, the patch preserves
this property. If someone feels bored, (s)he could try to identify this
dependency and express it properly on callback registration.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-22 10:50:34 -05:00
Anthony Liguori
0c257437b2 Introduce is_default field for QEMUMachine
f80f9ec changed the order that machines are registered which had the effect of
changing the default machine.  This changeset introduces a new is_default field
so that machine types can declare that they are the default for an architecture.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-21 20:54:40 -05:00
Anthony Liguori
f80f9ec9a6 Convert machine registration to use module init functions
This cleans up quite a lot of #ifdefs, extern variables, and other ugliness.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-21 08:47:55 -05:00