All callers pass "false" keeping the old semantics. The windows
implementation doesn't distinguish the flag yet. On posix, it is passed
down to the underlying aio context.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QEMU complains about -cpu host on an AMD machine:
warning: host doesn't support requested feature: CPUID.80000001H:EDX [bit 0]
For bits 0,1,3,4,5,6,7,8,9,12,13,14,15,16,17,23,24.
KVM_GET_SUPPORTED_CPUID and and x86_cpu_get_migratable_flags()
don't handle the AMD CPUID aliases bits, making
x86_cpu_filter_features() print warnings and clear those CPUID
bits incorrectly.
To avoid hacking x86_cpu_get_migratable_flags() to handle
CPUID_EXT2_AMD_ALIASES (just like the existing hack inside
kvm_arch_get_supported_cpuid()), simply move the
CPUID_EXT2_AMD_ALIASES code in x86_cpu_realizefn() after the
x86_cpu_filter_features() call.
This will probably make the CPUID_EXT2_AMD_ALIASES hack in
kvm_arch_get_supported_cpuid() unnecessary, too. The hack will be
removed in a follow-up patch after v2.6.0.
Reported-by: Radim Krčmář <rkrcmar@redhat.com>
Tested-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Xiao Guangrong ran kvm-unit-tests on an actual machine with PKU and
found that it fails:
test pte.p pte.user pde.p pde.user pde.a pde.pse pkru.wd pkey=1 user write efer.nx cr4.pke: FAIL: error code 27 expected 7
Dump mapping: address: 0x123400000000
------L4: 2ebe007
------L3: 2ebf007
------L2: 8000000020000a5
(All failures are combinations of "pde.user pde.p pkru.wd pkey=1",
plus either "pde.pse" or "pte.p pte.user", plus one of "user cr0.wp",
"cr0.wp" or "user", plus unimportant bits such as accessed/dirty or
efer.nx).
So PFEC.PKEY is set even if the ordinary check failed (which it did
because pde.w is zero). Adjust QEMU to match behavior of silicon.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM does not let you read or write this MSR if the corresponding CPUID
bit is not set. This in turn causes MSRs that come after MSR_TSC_AUX
to be ignored by KVM_SET_MSRS.
One visible symptom is that s3.flat from kvm-unit-tests fails with
CPUs that do not have RDTSCP, because the SMBASE is not reset to
0x30000 after reset.
Fixes: c9b8f6b621
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=1WTP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging
X86 fixes
# gpg: Signature made Mon 14 Mar 2016 20:26:25 GMT using RSA key ID 984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
* remotes/ehabkost/tags/x86-pull-request:
kvm: Remove x2apic feature from CPU model when kernel_irqchip is off
hyperv: cpu hotplug fix with HyperV enabled
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
x2apic feature is in the kvm_default_props and automatically added to all
CPU models when KVM is enabled. But userspace devices don't support x2apic
which can't be enabled without the in-kernel irqchip. It will trigger
warning of "host doesn't support requested feature: CPUID.01H:ECX.x2apic
[bit 21]" when kernel_irqchip is off. This patch is to fix it via removing
x2apic feature when kernel_irqchip is off.
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
With Hyper-V enabled CPU hotplug stops working. The CPU appears
in device manager on Windows but does not appear in peformance
monitor and control panel.
The root of the problem is the following. Windows checks
HV_X64_CPU_DYNAMIC_PARTITIONING_AVAILABLE bit in CPUID. The
presence of this bit is enough to cure the situation.
The bit should be set when CPU hotplug is allowed for HyperV VM.
The check that hot_add_cpu callback is defined is enough from the
protocol point of view. Though this callback is defined almost
always thus there is no need to export that knowledge in the
other way.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Eduardo Habkost <ehabkost@redhat.com>
CC: "Andreas Färber" <afaerber@suse.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We discriminate here between opcodes that are illegal in the current
cpu mode or with illegal arguments (such as modrm.mod == 3) and
encodings that are unknown (such as an unimplemented isa extension).
Signed-off-by: Richard Henderson <rth@twiddle.net>
The patch in 7f0b714 was too simplistic, in that we wound up setting
the flag and then resetting it immediately in gen_eob.
Fixes the reported boot problem with Windows XP.
Reported-by: Hervé Poussineau <hpoussin@reactos.org>
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
While ADDSEG will only be false in 16-bit mode for LEA, it can be
false even in other cases when 16-bit addresses are obtained via
the 67h prefix in 32-bit mode. In this case, gen_lea_v_seg forgets
to add a nonzero FS or GS base if CS/DS/ES/SS are all zero. This
case is pretty rare but happens when booting Windows 95/98, and
this patch fixes it.
The bug is visible since commit d6a291498, but it was introduced
together with gen_lea_v_seg and it probably could be reproduced
with a "addr16 gs movsb" instruction as early as in commit
ca2f29f555.
Reported-by: Hervé Poussineau <hpoussin@reactos.org>
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1456931078-21635-1-git-send-email-pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
In non-64-bit modes, the instruction always stores 16 bits.
But in 64-bit mode, when the destination is a register, the
instruction can write 32 or 64 bits.
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Two flags were tested the wrong way.
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1456845145-18891-1-git-send-email-pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
[rth: Fixed enable test as well.]
Adds the 'TCGv_env' type for pointers to 'CPUArchState' objects. The
tracing infrastructure later needs to differentiate between regular
pointers and pointers to vCPUs.
Also changes all targets to use the new 'TCGv_env' type instead of the
generic 'TCGv_ptr'. As of now, the change is merely cosmetic ('TCGv_env'
translates into 'TCGv_ptr'), but that could change in the future to
enforce the difference.
Note that a 'TCGv_env' type (for 'CPUState') is not added, since all
helpers currently receive the architecture-specific
pointer ('CPUArchState').
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Acked-by: Richard Henderson <rth@twiddle.net>
Message-id: 145641859552.30295.7821536833590725201.stgit@localhost
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The xsave and xrstor helpers are accessing the x86_ext_save_areas array
using a bit mask instead of a bit position. Provide two sets of XSTATE_*
definitions and use XSTATE_*_BIT when a bit position is requested.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is immediately usable by lea and multi-byte nop,
and will be required to implement parts of the mpx spec.
Signed-off-by: Richard Henderson <rth@twiddle.net>
This includes XSAVE, XRSTOR, XGETBV, XSETBV, which are all related,
as well as the associate cpuid bits.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Rather than nesting tests of OP, MOD, and RM, decode them all at once
with a switch. Also, add some missing #UD checks for e.g. incorrect
LOCK prefix.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Rather than nesting tests of OP, MOD, and RM, decode them
all at once with a switch. Fixes incorrect decoding of
AMD Pacifica extensions (aka vmrun et al) via op==2 path.
Signed-off-by: Richard Henderson <rth@twiddle.net>
(pde & 0x1fe000) is a 32-bit integer; when shifting it
into bits 39-32 the result is zero. Fix it by making the
mask (and thus the result of the AND) a 64-bit integer.
Reported by Coverity.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All references to cpu_T are done with a constant index. It aids
readability to decompose the array into two scalar variables.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1436426122-12276-11-git-send-email-rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Merge gen_op_addl_A0_im and gen_op_addq_A0_im into gen_add_A0_im
and clean up the ifdef.
Replace the one remaining user of gen_op_addl_A0_im with gen_add_A0_im.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1450379966-28198-10-git-send-email-rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unify the code across stack pointer widths. Fix the note about
not updating ESP before the potential exception.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1450379966-28198-9-git-send-email-rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use gen_lea_v_seg for centralized segment base knowledge. Unify
code across 32- and 64-bit. Fix note about "must save state"
before using the out-of-line helpers.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1450379966-28198-8-git-send-email-rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
More centralization of handling of segment bases.
Also fixes the note about 16-bit wrap around not fully handled.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1450379966-28198-7-git-send-email-rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Having segs[].base as a register significantly improves code
generation for real and protected modes, particularly for TBs
that have multiple memory references where the segment base
can be held in a hard register through the TB.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1450379966-28198-6-git-send-email-rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I.e. gen_push_v, gen_pop_T0, gen_stack_A0.
More centralization of handling of segment bases.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1450379966-28198-5-git-send-email-rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Centralize handling of segment bases.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1450379966-28198-4-git-send-email-rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Centralize computation of a MO_SIZE for the stack pointer.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1450379966-28198-3-git-send-email-rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
