The system emulation code was not merged before the branch.
Let's leave that work for the next release.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
With vhost_net="" (most non-Linux hosts), configure prints an
error message:
test: 2551: =: unexpected operator
Fix this and similar code by adding the missing "".
Cc: Wolfgang Mauerer <wolfgang.mauerer@siemens.com>
Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fix configure display for non-Linux OS's and the KVM /
vhost-net features to show "no" output instead of nothing
at the end of the line.
Signed-off-by: Brad Smith <brad@comstyle.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
On platforms that don't support makecontext(3) use gthread based
coroutine implementation.
Darwin has makecontext(3) but getcontext(3) is stubbed out to return
ENOTSUP. Andreas Färber <andreas.faerber@web.de> debugged this and
contributed the ./configure test which solves the issue for Darwin/ppc64
(and ppc) v10.5.
[Original patch by Aneesh, made consistent with coroutine-ucontext.c and
switched to GStaticPrivate by Stefan. Tested on Linux and OpenBSD.]
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This is required for building libcacard which doesn't itself require
zlib without bringing in this requirement to the build environment.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is just code movement, and moving the fpu/ include path from
target-dependent to target-independent Make variables.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
vhost.c uses __sync_fetch_and_and(), which is only
available for -march=i486 and above (see
https://bugzilla.redhat.com/show_bug.cgi?id=624279).
Signed-off-by: Wolfgang Mauerer <wolfgang.mauerer@siemens.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
When using xen_enabled() we're currently only checking if xen is enabled
at all during the build. But what if you want to build multiple targets
out of which only one can potentially run xen code?
That means that for generic code we'll still have to fall back to the
variable and potentially slow the code down, but it's not as important as
that is mostly xen device emulation which is not touched for non-xen targets.
The target specific code however can with this patch see that it's unable to
ever execute xen code. We can thus always return 0 on xen_enabled(), giving
gcc enough hints to evict the mapcache code from the target memory management
code.
Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Add configure check for python, exit if not found. Add switches
for specifying the path to python, use the path in Makefile.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
As far as I can tell, there isn't a dependency on gthread. Also, the only use
of gio was to enable GSocket to accept a unix domain socket.
Since GSocket isn't available on OpenSuSE 11.1, let's just remove that
dependency.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds support for a usb-redir device, which takes a chardev
as a communication channel to an actual usbdevice using the usbredir protocol.
Compiling the usb-redir device requires usbredir-0.3 to be installed for
the usbredir protocol parser, usbredir-0.3 also contains a server for
redirecting usb traffic from an actual usb device. You can get the 0.3
release of usbredir here:
http://people.fedoraproject.org/~jwrdegoede/usbredir-0.3.tar.bz2
(getting a more formal site for it is a WIP)
Example usage:
1) Start usbredirserver for a usb device:
sudo usbredirserver 045e:0772
2) Start qemu with usb2 support + a chardev talking to usbredirserver +
a usb-redir device using this chardev:
qemu ... \
-readconfig docs/ich9-ehci-uhci.cfg \
-chardev socket,id=usbredirchardev,host=localhost,port=4000 \
-device usb-redir,chardev=usbredirchardev,id=usbredirdev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This is the actual guest daemon, it listens for requests over a
virtio-serial/isa-serial/unix socket channel and routes them through
to dispatch routines, and writes the results back to the channel in
a manner similar to QMP.
A shorthand invocation:
qemu-ga -d
Is equivalent to:
qemu-ga -m virtio-serial -p /dev/virtio-ports/org.qemu.guest_agent.0 \
-f /var/run/qemu-ga.pid -d
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
Base definitions/includes for Visiter interface used by generated
visiter/marshalling code.
Includes a GenericList type. Our lists require an embedded element.
Since these types are generated, if you want to use them in a different
type of data structure, there's no easy way to add another embedded
element. The solution is to have non-embedded lists and that what this is.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
GLib is an extremely common library that has a portable thread implementation
along with tons of other goodies.
GLib and GObject have a fantastic amount of infrastructure we can leverage in
QEMU including an object oriented programming infrastructure.
Short term, it has a very nice thread pool implementation that we could leverage
in something like virtio-9p. It also has a test harness implementation that
this series will use.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
Introduce CONFIG_XEN_BACKEND so that this new config solely controls the
target-independent backend build and CONFIG_XEN can focus on per-target
building.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This is an all-in-one fix for the smaller and bigger mistakes of the
build system changes for accompanied Linux headers:
- only enable KVM and vhost on Linux hosts
- fix powerpc asm header symlink
- do not use Linux headers on non-Linux hosts
- fix kvmclock for !CONFIG_KVM
- fix s390 build on non-Linux hosts
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Tested-by: Andreas Färber <andreas.faerber@web.de>
Tested-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
pulse/simple.h does not include stdlib.h
We cannot use NULL since it may not be defined
Use 0 instead
Signed-off-by: Marc-Antoine Perennou <Marc-Antoine@Perennou.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
When we create the symlinks to source tree files, don't create them
if the file is not actually present in the source tree; this will
happen if the file is in a git submodule that wasn't checked out.
This also avoids the odd effect where an in-source-tree configure
will end up creating the missing file as a symlink to itself.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Required header support is now unconditionally available.
CC: Alexander Graf <agraf@suse.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This helps reducing our build-time checks for feature support in the
available Linux kernel headers. And it helps users that do not have
sufficiently recent headers installed on their build machine.
Consequently, the patch removes and build-time checks for kvm and vhost
in configure, the --kerneldir switch, and KVM_CFLAGS. Kernel headers are
supposed to be provided by QEMU only.
s390 needs some extra love as it carries redefinitions from kernel
headers.
CC: Alexander Graf <agraf@suse.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This function will be used to support sync dirty bitmap.
This come with a check against every Xen release, and special
implementation for Xen version that doesn't have this specific call.
This function will not be usable with Xen 3.3 because the behavior is
different.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
BeOS and Haiku on i386 use long for 32-bit types, including pid_t.
Using %d with pid_t therefore results in a warning.
Unfortunately POSIX:2008 does not define a PRId* string for pid_t.
In some places pid_t was previously casted to long and %ld hardcoded.
The predecessor of this patch added another upcast for the simpletrace
filename but was not applied to date.
Since new uses of pid_t with %d keep creeping in, let's instead define
an OS-dependent format string and use that consistently.
Cc: Stefan Hajnoczi <stefanha@gmail.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Ingo Weinhold <ingo_weinhold@gmx.de>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* 'cocoa-for-upstream' of git://repo.or.cz/qemu/afaerber:
Darwin: Fix compilation warning regarding the deprecated daemon() function
cocoa: Avoid warning related to multiple handleEvent: definitions
cocoa: Revert dependency on VNC
cocoa: Provide central qemu_main() prototype
Fix libfdt warnings on Darwin
configure: Fix check for fdatasync()
Remove warning in printf due to type mismatch
Cocoa: avoid displaying window when command-line contains '-h' or '-help'
Fix compilation warning due to incorrectly specified type
cocoa: do not create a spurious window for -version
No flag to configure is required. Instead, added a libcacard.la target that
is not built by default, only when requested explicitly via:
mkdir build
cd build
../configure
make libcacard.la
make install-libcacard
Uses libtool to do actual linking of object files and shared library, and
installing. Tested only under linux, but supposed to work on other systems as
well.
If libtool isn't found you get a message complaining about that, only at build
time (since it is not a default target I did not add a message at configure
time).
New build artifacts:
.libs subdirectories (at <buildroot> and <buildroot>/libcacard)
*.lo files (at same locations as the respective o files)
Added %.lo : %.c rule that uses libtool.
Updated clean rule to clean up those artifacts.
Added specific rule to call dtrace with libtool wrapper (note that because of
a current upstream dtrace bug fixed by systemtap b1568fd85 commit the -fPIC flag
isn't actually passed on. still current dtrace+libtool produced object links fine).
If libtool is missing any of the following targets will complain and exit 1:
any subdir: *.lo
root and libcacard: libcacard.la, libcacard-instsall
Tested to link and load with all tracing backends.
Under Darwin, a symbol exists for the fdatasync() function, so that our
link test succeeds. However _POSIX_SYNCHRONIZED_IO is set to '-1'.
According to POSIX:2008, a value of -1 means the feature is not supported.
A value of 0 means supported at compilation time, and a value greater 0
means supported at both compilation and run time.
Enable fdatasync() only if _POSIX_SYNCHRONIZED_IO is '>0'.
Signed-off-by: Alexandre Raymond <cerbere@gmail.com>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Older versions of libcurl don't have some of the features we try to
use, in particular curl_multi_setopt(). Check for this in the 'is
libcurl available?' configure test so we disable curl support if the
library is too old.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
* rth/axp-next: (26 commits)
target-alpha: Implement TLB flush primitives.
target-alpha: Use a fixed frequency for the RPCC in system mode.
target-alpha: Trap for unassigned and unaligned addresses.
target-alpha: Remap PIO space for 43-bit KSEG for EV6.
target-alpha: Implement cpu_alpha_handle_mmu_fault for system mode.
target-alpha: Implement more CALL_PAL values inline.
target-alpha: Disable interrupts properly.
target-alpha: All ISA checks to use TB->FLAGS.
target-alpha: Swap shadow registers moving to/from PALmode.
target-alpha: Implement do_interrupt for system mode.
target-alpha: Add IPRs to be used by the emulation PALcode.
target-alpha: Use kernel mmu_idx for pal_mode.
target-alpha: Add various symbolic constants.
target-alpha: Use do_restore_state for arithmetic exceptions.
target-alpha: Tidy up arithmetic exceptions.
target-alpha: Tidy exception constants.
target-alpha: Enable the alpha-softmmu target.
target-alpha: Rationalize internal processor registers.
target-alpha: Merge HW_REI and HW_RET implementations.
target-alpha: Cleanup MMU modes.
...
librbd stacks on top of librados to provide access
to rbd images.
Using librbd simplifies the qemu code, and allows
qemu to use new versions of the rbd format
with few (if any) changes.
Reviewed-by: Christian Brunner <chb@muc.de>
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch raises the minimum required spice version to 0.6.0 and drops
a few ifdefs.
0.6.0 is the first stable release with the current libspice-server API,
there shouldn't be any 0.5.x development versions deployed any more.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Older gcc compilers do not support -Wendif-labels, so move it from the
hardcoded list to the dynamically detected list.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Remove softfloat-native support, all targets are now using softfloat
instead.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
With all of the pre-existing code that would not compile gone,
this is the earliest point at which the target can be enabled.
There is no machine defined yet, so this will crash on startup.
Enable the target anyway, to make sure that further compilation
problems do not creep back in.
Signed-off-by: Richard Henderson <rth@twiddle.net>
The --disable-slirp option was undocumented; add it to configure's
--help output.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Include the list of available targets in the --help output
for the --target-list= option.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
* 'ppc-next' of git://repo.or.cz/qemu/agraf:
PPC: Qdev'ify e500 pci
PPC MPC7544DS: Use new TLB helper function
PPC: Implement e500 (FSL) MMU
PPC: Add another 64 bits to instruction feature mask
PPC: Add GS MSR definition
PPC: Make MPC8544DS emulation work w/o KVM
PPC: Make MPC8544DS obey -cpu switch
Fix off-by-one error in sizing pSeries hcall table
ppc64: Fix out-of-tree builds
kvm: ppc: warn user on PAGE_SIZE mismatch
kvm: ppc: detect old headers
monitor: add PPC BookE SPRs
kvm: ppc: fixes for KVM_SET_SREGS on init
ppc64: Don't try to build sPAPR RTAS on Darwin
Place pseries vty devices at addresses more similar to existing machines
Make pSeries 'model' property more closely resemble real hardware
pseries: Increase maximum CPUs to 256
On ppc64 host, recursion into pc-bios/spapr-rtas/ fails for
out-of-tree builds. Add missing dir and symlink.
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
When compiling Qemu with older kernel headers, the PVR setting
mechanism isn't available yet. Unfortunately, back then I didn't add
a capability we could check against, so all we can do is add a configure
test to see if we support PVR setting. For BookE, we don't care yet.
This fixes compilation errors with KVM enabled on older kernel headers
(like 2.6.32).
Signed-off-by: Alexander Graf <agraf@suse.de>
The Darwin assembler fails to build it.
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
With MapCache, we can handle a 64b target, even with a 32b host/qemu.
So, we need to have target_phys_addr_t to 64bits.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
On IA32 host or IA32 PAE host, at present, generally, we can't create
an HVM guest with more than 2G memory, because generally it's almost
impossible for Qemu to find a large enough and consecutive virtual
address space to map an HVM guest's whole physical address space.
The attached patch fixes this issue using dynamic mapping based on
little blocks of memory.
Each call to qemu_get_ram_ptr makes a call to qemu_map_cache with the
lock option, so mapcache will not unmap these ram_ptr.
Blocks that do not belong to the RAM, but usually to a device ROM or to
a framebuffer, are handled in a separate function. So the whole RAMBlock
can be map.
Signed-off-by: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch updates the libxenctrl calls in Qemu to use the new interface,
otherwise Qemu wouldn't be able to build against new versions of the
library.
We check libxenctrl version in configure, from Xen 3.3.0 to Xen
unstable.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that we start adding more files related to 9pfs
it make sense to move them to a separate directory
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Because the opengl library is only linked to for the lm32 target, we can
now safely enable opengl by default again.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This patch is the first attempt to make configure more intelligent with
regard to how it links to libraries. It divides the softmmu libraries into
two lists, a general one and a list which depends on the target
architecture.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Work around a SPARC glibc bug which caused the epoll_create1 configure
test to wrongly claim that the function was present. Some versions of
SPARC glibc provided the function in the library but didn't declare
it in the include file; the result is that gcc warns about an implicit
declaration but a link succeeds. So we reference the function as a
value rather than a function call to induce a compile time error
if the declaration was not present.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This increase the correctness (precision, NaN values, corner cases) on
non-x86 machines, and add the possibility to handle the exception
correctly.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
There is a bug in nvidia's binary GPU driver, which causes a segmentation
fault if linked to libGL.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The alignment for longs on s390x is 8. That's the only place where it differs
from the default alignments found in configure already. The example alignment
program from Laurent printed the following on a real s390x:
alignof(short) 2
alignof(int) 4
alignof(long) 8
alignof(long long) 8
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
basename prints a missing-argument error when sdlconfig is empty
and we're cross-compiling.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Standard autoconf scripts include a --version flag so people can easily
query things. Add this to qemu's configure so it too can integrate with
build systems that have standard autotool helpers.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch introduce a new config option CONFIG_OPENGL.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for the Milkymist AC97 compatible sound output and
input core.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
S390x user emulation can do nptl. Reflect this in the configure script.
Signed-off-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
libcacard emulates a Common Access Card (CAC) which is a standard
for smartcards. It is used by the emulated ccid card introduced in
a following patch. Docs are available in docs/libcacard.txt
Signed-off-by: Alon Levy <alevy@redhat.com>
---
changes from v24->v25:
* Fix out of tree builds.
* Fix build with linux-user targets.
changes from v23->v24: (Jes Sorensen review 2)
* Makefile.target: use obj-$(CONFIG_*) +=
* remove unrequired includes, include qemu-common before qemu-thread
* required adding #define NO_NSPR_10_SUPPORT (harmless)
changes from v22->v23:
* configure fixes: (reported by Stefan Hajnoczi)
* test a = b, not a == b (second isn't portable)
* quote $source_path in case it contains spaces
- this doesn't really help since there are many other places
that need similar fixes, not introduced by this patch.
changes from v21->v22:
* fix configure to not link libcacard if nss not found
(reported by Stefan Hajnoczi)
* fix vscclient linkage with simpletrace backend
(reported by Stefan Hajnoczi)
* card_7816.c: add missing break in ERROR_DATA_NOT_FOUND
(reported by William van de Velde)
changes from v20->v21: (Jes Sorensen review)
* use qemu infrastructure: qemu-thread, qemu-common (qemu_malloc
and qemu_free), error_report
* assert instead of ASSERT
* cosmetic fixes
* use strpbrk and isspace
* add --disable-nss --enable-nss here, instead of in the final patch.
* split vscclient, passthru and docs to following patches.
changes from v19->v20:
* checkpatch.pl
changes from v15->v16:
Build:
* don't erase self with distclean
* fix make clean after make distclean
* Makefile: make vscclient link quiet
Behavioral:
* vcard_emul_nss: load coolkey in more situations
* vscclient:
* use hton,ntoh
* send init on connect, only start vevent thread on response
* read payload after header check, before type switch
* remove Reconnect
* update for vscard_common changes, empty Flush implementation
Style/Whitespace:
* fix wrong variable usage
* remove unused variable
* use only C style comments
* add copyright header
* fix tabulation
Signed-off-by: Alon Levy <alevy@redhat.com>
libcacard: fix out of tree builds
A CCID device is a smart card reader. It is a USB device, defined at [1].
This patch introduces the usb-ccid device that is a ccid bus. Next patches will
introduce two card types to use it, a passthru card and an emulated card.
[1] http://www.usb.org/developers/devclass_docs/DWG_Smart-Card_CCID_Rev110.
Signed-off-by: Alon Levy <alevy@redhat.com>
---
changes from v20->v21: (Jes Sorenson review)
* cosmetic changes - fix multi line comments.
* reorder fields in USBCCIDState
* add reference to COPYING
* add --enable-smartcard and --disable-smartcard here (moved
from last patch)
changes from v19->v20:
* checkpatch.pl
changes from v18->v19:
* merged: ccid.h: add copyright, fix define and remove non C89 comments
* add qdev.desc
changes from v15->v16:
Behavioral changes:
* fix abort on client answer after card remove
* enable migration
* remove side affect code from asserts
* return consistent self-powered state
* mask out reserved bits in ccid_set_parameters
* add missing abRFU in SetParameters (no affect on linux guest)
whitefixes / comments / consts defines:
* remove stale comment
* remove ccid_print_pending_answers if no DEBUG_CCID
* replace printf's with DPRINTF, remove DEBUG_CCID, add verbosity defines
* use error_report
* update copyright (most of the code is not original)
* reword known bug comment
* add missing closing quote in comment
* add missing whitespace on one line
* s/CCID_SetParameter/CCID_SetParameters/
* add comments
* use define for max packet size
Comment for "return consistent self-powered state":
the Configuration Descriptor bmAttributes claims we are self powered,
but we were returning not self powered to USB_REQ_GET_STATUS control message.
In practice, this message is not sent by a linux 2.6.35.10-74.fc14.x86_64
guest (not tested on other guests), unless you issue lsusb -v as root (for
example).
On pSeries machines, operating systems can instantiate "RTAS" (Run-Time
Abstraction Services), a runtime component of the firmware which implements
a number of low-level, infrequently used operations. On logical partitions
under a hypervisor, many of the RTAS functions require hypervisor
privilege. For simplicity, therefore, hypervisor systems typically
implement the in-partition RTAS as just a tiny wrapper around a hypercall
which actually implements the various RTAS functions.
This patch implements such a hypercall based RTAS for our emulated pSeries
machine. A tiny in-partition "firmware" calls a new hypercall, which
looks up available RTAS services in a table.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
rbd support tries to both link with -lrados and -lcrypto. While the
first one is of course necessary, the second is not necessary (only
librados ifself needs to link with libcrypto).
This fixes a licensing issue: qemu as a whole is GPL v2, and thus can't
be linked with OpenSSL without an exception in the license, which seems
difficult to get given the number of persons involved.
Cc: Christian Brunner <chb@muc.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
MinGW optionally includes pdcurses, so add support for it.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
libiberty.a is part of MinGW and provides useful functions
like ffs (MinGW) and getopt (MinGW-w64).
It is needed for w64 compilations and allows simpler code for w32.
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
qemu i386 used to support more than 4GB of RAM through PAE, but it has
been disabled for an unknown reason. Reenable it.
Note that simply running qemu x86_64 and emulating a 32-bit CPU is not
a solution to this problem as it is about 15% slower (it needs to
emulate 64 bit registers even if half of them are not used). On the
other hand, I haven't seen any measurable impact by switching
target_phys_bits to 64.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Support the epoll family of syscalls: epoll_create(), epoll_create1(),
epoll_ctl(), epoll_wait() and epoll_pwait(). Note that epoll_create1()
and epoll_pwait() are later additions, so we have to test separately
in configure for their presence.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Found by Stefan Hajnoczi: There is a race in kvm_cpu_exec between
checking for exit_request on vcpu entry and timer signals arriving
before KVM starts to catch them. Plug it by blocking both timer related
signals also on !CONFIG_IOTHREAD and process those via signalfd.
As this fix depends on real signalfd support (otherwise the timer
signals only kick the compat helper thread, and the main thread hangs),
we need to detect the invalid constellation and abort configure.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
CC: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This backend sends trace events to standard error output during the emulation.
Also add a "--list-backends" option to tracetool, so configure script can
display the list of available backends.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Acked-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Non-existent $pkgconfig instead of $pkg_config was used when configure
probes for spice availability.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Instead of splattering the code with #ifdefs and runtime checks for
capabilities we cannot work without anyway, provide central test
infrastructure for verifying their availability both at build and
runtime.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Make use of the new KVM_NMI IOCTL to send NMIs into the KVM guest if the
user space raised them. (example: qemu monitor's "nmi" command)
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
We need to be able to catch exceptions correctly and thus enable softfloat
on SH4.
As all machines except i386 and x86_64 are using softfloat, make it the
default and change the case to detect i386 and x86_64. Note that CRIS
doesn't have an FPU, so it can be configured with both softfloat-native
and softfloat.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Since commit d1807a4f83 ./configure tries
to test files and directories with "test -f", which only test for regular
files. Test with "test -e", which looks for any kind of files.
This unbreak the configure script when not using a separate object
directory.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
These are not in any release, so I am just renaming them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This will help getting config.guess and config.sub from the srcdir.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Not necessary since we use mkdir -p and from this patch test -f.
Also, dirname returns "." if a path has no directory component,
as is the case for "sh configure".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
"ln -sf" does not really do anything more than "ln -s" on Solaris.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This also allows overriding it with SDL_CONFIG, and warning in suspicious
cross-compilation scenarios.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This can still be requested with PKG_CONFIG=/path/to/pkg-config.
Just do not use it as a default, and print a warning.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Do not hardcode the list of 64-bit CPUs. Use sizeof(void *) to
compute it. Renaming it to HOST_LONG_BITS to HOST_POINTER_BITS
is left for later.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Non-existent -I paths are dropped silently by the compiler, but still
it is not polite to pass bogus options. Configure-time tests do not
need any include files from the source path, so only include -I flags
at make time (when they're properly expanded).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The "test the C compiler works ok" comes before a bunch of flags
are added for --cpu or just depending on the host. It helps
debugging if the test is done after these flags are (unconditionally)
added.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
I didn't test with sparse, but the old code using += before a variable
was set was wrong. Sparse support should probably be ripped out or
redone, but this at least keeps some sanity.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add a configure check for the existence of linux/fiemap.h and the
IOC_FS_FIEMAP ioctl. This fixes a compilation failure on Linux
systems which don't have that header file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Implement the missing syscalls sync_file_range and sync_file_range2.
The latter in particular is used by newer versions of apt on Ubuntu
for ARM.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Add support to discard blocks in a raw image residing on an XFS filesystem
by calling the XFS_IOC_UNRESVSP64 ioctl to punch holes. Support for other
hole punching mechanisms can be added when they become available.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
RBD is an block driver for the distributed file system Ceph
(http://ceph.newdream.net/). This driver uses librados (which is part
of the Ceph server) for direct access to the Ceph object store and is
running entirely in userspace (Yehuda also wrote a driver for the
linux kernel, that can be used to access rbd volumes as a block
device).
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Christian Brunner <chb@muc.de>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This introduces generation of a qemu.stp/qemu-system-XXX.stp
files which provides tapsets with friendly names for static
probes & their arguments. Instead of
probe process("qemu").mark("qemu_malloc") {
printf("Malloc %d %p\n", $arg1, $arg2);
}
It is now possible todo
probe qemu.system.i386.qemu_malloc {
printf("Malloc %d %p\n", size, ptr);
}
There is one tapset defined per target arch, for both
user and system emulators.
* Makefile.target: Generate stp files for each target
* tracetool: Support for generating systemtap tapsets
* configure: Check for whether systemtap is available
with the DTrace backend
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This introduces a new tracing backend that targets the SystemTAP
implementation of DTrace userspace tracing. The core functionality
should be applicable and standard across any DTrace implementation
on Solaris, OS-X, *BSD, but the Makefile rules will likely need
some small additional changes to cope with OS specific build
requirements.
This backend builds a little differently from the other tracing
backends. Specifically there is no 'trace.c' file, because the
'dtrace' command line tool generates a '.o' file directly from
the dtrace probe definition file. The probe definition is usually
named with a '.d' extension but QEMU uses '.d' files for its
external makefile dependancy tracking, so this uses '.dtrace' as
the extension for the probe definition file.
The 'tracetool' program gains the ability to generate a trace.h
file for DTrace, and also to generate the trace.d file containing
the dtrace probe definition.
Example usage of a dtrace probe in systemtap looks like:
probe process("qemu").mark("qemu_malloc") {
printf("Malloc %d %p\n", $arg1, $arg2);
}
* .gitignore: Ignore trace-dtrace.*
* Makefile: Extra rules for generating DTrace files
* Makefile.obj: Don't build trace.o for DTrace, use
trace-dtrace.o generated by 'dtrace' instead
* tracetool: Support for generating DTrace data files
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This introduces generation of a qemu.stp/qemu-system-XXX.stp
files which provides tapsets with friendly names for static
probes & their arguments. Instead of
probe process("qemu").mark("qemu_malloc") {
printf("Malloc %d %p\n", $arg1, $arg2);
}
It is now possible todo
probe qemu.system.i386.qemu_malloc {
printf("Malloc %d %p\n", size, ptr);
}
There is one tapset defined per target arch.
* Makefile: Generate a qemu.stp file for systemtap
* tracetool: Support for generating systemtap tapsets
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This introduces a new tracing backend that targets the SystemTAP
implementation of DTrace userspace tracing. The core functionality
should be applicable and standard across any DTrace implementation
on Solaris, OS-X, *BSD, but the Makefile rules will likely need
some small additional changes to cope with OS specific build
requirements.
This backend builds a little differently from the other tracing
backends. Specifically there is no 'trace.c' file, because the
'dtrace' command line tool generates a '.o' file directly from
the dtrace probe definition file. The probe definition is usually
named with a '.d' extension but QEMU uses '.d' files for its
external makefile dependancy tracking, so this uses '.dtrace' as
the extension for the probe definition file.
The 'tracetool' program gains the ability to generate a trace.h
file for DTrace, and also to generate the trace.d file containing
the dtrace probe definition.
Example usage of a dtrace probe in systemtap looks like:
probe process("qemu").mark("qemu_malloc") {
printf("Malloc %d %p\n", $arg1, $arg2);
}
* .gitignore: Ignore trace-dtrace.*
* Makefile: Extra rules for generating DTrace files
* Makefile.obj: Don't build trace.o for DTrace, use
trace-dtrace.o generated by 'dtrace' instead
* tracetool: Support for generating DTrace data files
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds three devices to qemu:
intel-hda
Intel HD Audio Controller, the PCI device. Provides a HDA bus.
Emulates ICH6 at the moment. Adding a ICH9 PCIE
variant shouldn't be hard.
hda-duplex
HDA Codec. Attaches to the HDA bus. Supports 16bit stereo,
rates 16k -> 96k, playback, recording and volume control
(with CONFIG_MIXEMU=y).
hda-output
HDA Codec without recording support. Subset of the hda-duplex
codec. Use this if you don't want your guests access your mic.
Usage: add '-device intel-hda -device hda-duplex' to your command line.
Tested guests:
* Linux works.
* Win7 works.
* DOS (mpxplay) works.
* WinXP doesn't work.
[ v2 changes ]
* Fixed endianess, big endian hosts work now.
* Fixed some emulation bugs.
* Added immediate command emulation.
* Added vmstate support.
* Make it behave like all other sound card drivers:
- can be configured via '--audio-card-list=hda'
- can be added to a VM using '-soundhw hda'
* Code style fixups.
* Zapped guest-triggerable asserts.
* Handle partial reads/writes of audio data correctly.
Cc: malc <av1474@comtv.ru>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
1) compute path to i386 compiler from configure. If it is found, run
the i386 tests. I use macros so that this approach could be applied
for other arches as well.
2) provide an easily extensible way to add tests
Most tests fail, but at least "make test" does something meaningful.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Port qemu-kvm's signalfd compat code.
commit 5a7fdd0abd7cd24dac205317a4195446ab8748b5
Author: Anthony Liguori <aliguori@us.ibm.com>
Date: Wed May 7 11:55:47 2008 -0500
Use signalfd() in io-thread
This patch reworks the IO thread to use signalfd() instead of sigtimedwait()
This will eliminate the need to use SIGIO everywhere.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
-Wall enables a bunch of warnings at once. configure puts it after
$gcc_flags. This makes it impossible to disable warnings enabled by
-Wall there. Fix by putting configured flags last.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Only Mac-on-Linux stuff used video.x, OpenBIOS does not need it.
Remove video.x MoL hacks.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
pkg-config is not always available (e.g. on win32 hosts),
but we don't want to see the 'command not found' error message.
Redirect stdout and stderr to /dev/null.
v2:
* Removed changes which should not have been here.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
_GNU_SOURCE is already defined in QEMU_CFLAGS which
is passed to gcc in shell function compile_prog.
Removing the definition from several checks avoids compiler warnings
(which are now written to config.log).
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This fixes an observed failure to detect madvise() on Linux.
To avoid similar issues, all other tests that use NULL but don't already
have stddef.h (or another header that is defined to provide NULL,
such as stdio.h, unistd.h, or time.h) are also fixed.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Haiku has pthreads integrated into its libroot.so library. No linker arguments
are needed for it, so don't fail if -lpthread and similar don't link.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
For compatibility with BeOS, Haiku's error codes are negative whereas recent
POSIX versions require them to be positive. As spotted by François, some
parts of QEMU code rely on this, so use a mapper library to convert them
to positive ones.
Cc: François Revol <revol@free.fr>
Cc: Ingo Weinhold <ingo_weinhold@gmx.de>
Haiku has network functions in libnetwork.so. It doesn't ship libutil.so.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add QEMU version information to the executables, based on earlier
work by C. W. Betts and Robert Riebisch.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Don't call exit in the trap handler as it causes the return code to be
zero with some buggy shells (dash and pdksh at least) and is useless
here anyway.
Signed-off-by: Loïc Minier <loic.minier@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
vl.c has a Sun-specific hack to supply a prototype for madvise(),
but the call site has apparently moved to arch_init.c.
Haiku doesn't implement madvise() in favor of posix_madvise().
OpenBSD and Solaris 10 don't implement posix_madvise() but madvise().
MinGW implements neither.
Check for madvise() and posix_madvise() in configure and supply qemu_madvise()
as wrapper. Prefer madvise() over posix_madvise() due to flag availability.
Convert all callers to use qemu_madvise() and QEMU_MADV_*.
Note that on Solaris the warning is fixed by moving the madvise() prototype,
not by qemu_madvise() itself. It helps with porting though, and it simplifies
most call sites.
v7 -> v8:
* Some versions of MinGW have no sys/mman.h header. Reported by Blue Swirl.
v6 -> v7:
* Adopt madvise() rather than posix_madvise() semantics for returning errors.
* Use EINVAL in place of ENOTSUP.
v5 -> v6:
* Replace two leftover instances of POSIX_MADV_NORMAL with QEMU_MADV_INVALID.
Spotted by Blue Swirl.
v4 -> v5:
* Introduce QEMU_MADV_INVALID, suggested by Alexander Graf.
Note that this relies on -1 not being a valid advice value.
v3 -> v4:
* Eliminate #ifdefs at qemu_advise() call sites. Requested by Blue Swirl.
This will currently break the check in kvm-all.c by calling madvise() with
a supported flag, which will not fail. Ideas/patches welcome.
v2 -> v3:
* Reuse the *_MADV_* defines for QEMU_MADV_*. Suggested by Alexander Graf.
* Add configure check for madvise(), too.
Add defines to Makefile, not QEMU_CFLAGS.
Convert all callers, untested. Suggested by Blue Swirl.
* Keep Solaris' madvise() prototype around. Pointed out by Alexander Graf.
* Display configure check results.
v1 -> v2:
* Don't rely on posix_madvise() availability, add qemu_madvise().
Suggested by Blue Swirl.
Signed-off-by: Andreas Färber <afaerber@opensolaris.org>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
If the linker supports the flags --dynamicbase, --no-seh,
or --nxcompat, use them.
Tested on Windows Vista: Process Explorer reports that ASLR and DEP
are in use. No effect seen on Wine or Windows XP.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
If the compiler supports the warning flag -Wnested-externs, use it.
Avoid the only warning by moving the declaration of xml_builtin to a
more proper place.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
If the compiler supports the warning flag -Wempty-body, use it.
Adjust the code to avoid the warnings.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
If the compiler supports the following warning flags, use them:
-Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers
-Wmissing-include-dirs
Currently, these flags don't produce any warnings.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch adds LTTng Userspace Tracer (UST) backend support. The UST
system requires no kernel support but libust and liburcu must be
installed.
$ ./configure --trace-backend ust
$ make
Start the UST daemon:
$ ustd &
List available tracepoints and enable some:
$ ustctl --list-markers $(pgrep qemu)
[...]
{PID: 5458, channel/marker: ust/paio_submit, state: 0, fmt: "acb %p
opaque %p sector_num %lu nb_sectors %lu type %lu" 0x4b32ba}
$ ustctl --enable-marker "ust/paio_submit" $(pgrep qemu)
Run the trace:
$ ustctl --create-trace $(pgrep qemu)
$ ustctl --start-trace $(pgrep qemu)
[...]
$ ustctl --stop-trace $(pgrep qemu)
$ ustctl --destroy-trace $(pgrep qemu)
Trace results can be viewed using lttv-gui.
More information about UST:
http://lttng.org/ust
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
trace: Check for LTTng Userspace Tracer headers
When using the 'ust' backend, check if the relevant headers are
available at host.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Allow users to specify a file for trace-outputs at configuration.
Also, allow trace files to be annotated by <pid> so each qemu instance has
unique traces.
The trace file name can be passed as a config option:
--trace-file=/path/to/file
(Default: trace )
At runtime, the pid of the qemu process is appended to the filename so
that mutiple qemu instances do not have overlapping logs.
Eg : trace-1234 for qemu launched with pid 1234.
I have yet to test this on windows. getpid() is used at many places
in code(including vnc.c), so I'm hoping this would be okay too.
Edited-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch adds support for dynamically enabling/disabling of trace events.
This is done by internally maintaining each trace event's state, and
permitting logging of data from a trace event only if it is in an
'active' state.
Monitor commands added :
1) info trace-events : to view all available trace events and
their state.
2) trace-event NAME on|off : to enable/disable data logging from a
given trace event.
Eg, trace-event paio_submit off
disables logging of data when
paio_submit is hit.
By default, all trace-events are disabled. One can enable desired trace-events
via the monitor.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
trace: Monitor command 'info trace'
Monitor command 'info trace' to display contents of trace buffer
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
trace: Remove monitor.h dependency from simpletrace
User-mode targets don't have a monitor so the simple trace backend
currently does not build on those targets. This patch abstracts the
monitor printing interface so there is no direct coupling between
simpletrace and the monitor.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch adds a simple tracer which produces binary trace files. To
try out the simple backend:
$ ./configure --trace-backend=simple
$ make
After running QEMU you can pretty-print the trace:
$ ./simpletrace.py trace-events trace.log
The output of simpletrace.py looks like this:
qemu_realloc 0.699 ptr=0x24363f0 size=0x3 newptr=0x24363f0
qemu_free 0.768 ptr=0x24363f0
^ ^---- timestamp delta (us)
|____ trace event name
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
trace: Make trace record fields 64-bit
Explicitly use 64-bit fields in trace records so that timestamps and
magic numbers work for 32-bit host builds.
Includes fixes from Prerna Saxena <prerna@linux.vnet.ibm.com>.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch introduces the trace-events file where trace events can be
declared like so:
qemu_malloc(size_t size) "size %zu"
qemu_free(void *ptr) "ptr %p"
These trace event declarations are processed by a new tool called
tracetool to generate code for the trace events. Trace event
declarations are independent of the backend tracing system (LTTng User
Space Tracing, ftrace markers, DTrace).
The default "nop" backend generates empty trace event functions.
Therefore trace events are disabled by default.
The trace-events file serves two purposes:
1. Adding trace events is easy. It is not necessary to understand the
details of a backend tracing system. The trace-events file is a
single location where trace events can be declared without code
duplication.
2. QEMU is not tightly coupled to one particular backend tracing system.
In order to support tracing across QEMU host platforms and to
anticipate new backend tracing systems that are currently maturing,
it is important to be flexible and not tied to one system.
This commit includes fixes from Prerna Saxena
<prerna@linux.vnet.ibm.com> and Blue Swirl <blauwirbel@gmail.com>.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
We must be able to use a non-native strip executable, but not all
versions of 'install' support the --strip-program option (e.g.
OpenBSD). Accordingly, we can't use 'install -s', and we must run strip
separately.
Signed-off-by: Hollis Blanchard <hollis@penguinppc.org>
Cc: blauwirbel@gmail.com
vnc_jpeg and vnc_png are now "auto" by default, this means that
if the dependencies are installed (libjpeg or libpng), then they
will be enabled.
vnc_thread is disabled by default. It should be enabled by default
as soon as it's stable enougth.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Implement a threaded VNC server using the producer-consumer model.
The main thread will push encoding jobs (a list a rectangles to update)
in a queue, and the VNC worker thread will consume that queue and send
framebuffer updates to the output buffer.
The threaded VNC server can be enabled with ./configure --enable-vnc-thread.
If you don't want it, just use ./configure --disable-vnc-thread and a syncrhonous
queue of job will be used (which as exactly the same behavior as the old queue).
If you disable the VNC thread, all thread related code will not be built and there will
be no overhead.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce a new encoding: VNC_ENCODING_TIGHT_PNG [1] (-269) with a new
tight filter VNC_TIGHT_PNG (0x0A). When the client tells it supports the Tight PNG
encoding, the server will use tight, but will always send encoding pixels using
PNG instead of zlib. If the client also told it support JPEG, then the server can
send JPEG, because PNG will only be used in the cases zlib was used in normal tight.
This encoding was introduced to speed up HTML5 based VNC clients like noVNC [2], but
can also be used on devices like iPhone where PNG can be rendered in hardware.
[1] http://wiki.qemu.org/VNC_Tight_PNG
[2] http://github.com/kanaka/noVNC/
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move sdl, vnc, curses and cocoa UI into ui/ to cleanup
the root directory. Also remove some unnecessary explicit
targets from Makefile.
aliguori: fix build when srcdir != objdir
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add gradient filter and JPEG compression with an heuristic to detect how
lossy the comppression will be. This code has been adapted from
libvncserver/tight.c.
JPEG support can be enabled/disabled at compile time with --enable-vnc-jpeg
and --disable-vnc-jpeg.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Original patch from Ulrich Hecht, further work from Alexander Graf
and Richard Henderson.
Cc: Ulrich Hecht <uli@suse.de>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This patch adds required infrastructure for the new security model.
- A new configure option for attr/xattr.
- if CONFIG_VIRTFS will be defined if both CONFIG_LINUX and CONFIG_ATTR defined.
- Defines routines related to both security models.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Force -m31/-m64 based on s390/s390x target.
Force -march=z990. The TCG backend will always require the
long-displacement facility, so the compiler may as well make
use of that as well.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The default placement of the application at 0x80000000 is fine,
and will avoid the default placement for most other guests.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Making an xyzdir variable for each directory prepares for the next
patches introducing config-host.h defines and configure options for them.
It also fixes the problem where overriding prefix at "make install"
time did not override it for sysconfdir.
Removes some of the differences between sysconfdir and other variables,
the rest will go away later.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Just a personal preference against duplicating hieroglyphics.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
We forgot to propagate -fpie to the libdis-user directory.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
One of the most important missing feature in QMP today is its
supported commands documentation.
The plan is to make it part of self-description support, however
self-description is a big task we have been postponing for a
long time now and still don't know when it's going to be done.
In order not to compromise QMP adoption and make users' life easier,
this commit adds a simple text documentation which fully describes
all QMP supported commands.
This is not ideal for a number of reasons (harder to maintain,
text-only, etc) but does improve the current situation. To avoid at
least divering from the user monitor help and texi snippets, QMP bits
are also maintained inside qemu-monitor.hx, and hxtool is extended to
generate a single text file from them.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch enhances the algorithm which finds the correct settings for SDL.
For cross compilations (when cross_prefix is set), it looks for sdl-config
with cross prefix. Here is the complete search order:
$(cross_prefix}pkg-config (old, only used for cross compilation)
${cross_prefix}sdl_config (new, only used for cross compilation)
pkg-config (old, needs PATH)
sdl-config (old, needs PATH)
Cross SDL packages (or the user) now can simply set a link (for example
/usr/bin/i586-mingw32msvc-sdl-config -> /usr/i586-mingw32msvc/bin/sdl-config)
which allows cross compilations without PATH modifications.
Without the patch, configure and make (which calls configure) typically
need a non-standard PATH. Failing to set this special PATH results in
broken builds.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This patch creates a new command line option named -fsdev to hold any file
system specific information.
The option will currently hold the following attributes:
-fsdev fstype id=id,path=path_to_share
where
fstype: Type of the file system.
id: Identifier used to refer to this fsdev
path: The path on the host that is identified by this fsdev.
[aneesh.kumar@linux.vnet.ibm.com: Abstraction using FsContext]
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The ABI-specific types used by linux_binprm and image_info
are different after forcing TARGET_ABI32 on. Which means
that the parameters that load_elf_binary_multi sees are not
those that loader_exec passed. This is inherently broken
and is more trouble than it's worth fixing.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Using $pkgconfig instead of pkg-config will use
${cross_prefix}pkg-config if that is available.
This fix is needed for cross compilations without
modified PATH. Without the fix, PATH must be modified
to find the cross pkg-config before the native
pkg-config.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Delete inline functions from tcg-target.h that don't need to be there,
move the others to tcg-target.c. Add 'Z', 'I', 'J' constraints for
0, signed 11-bit, and signed 5-bit respectively. Add GUEST_BASE support
similar to ppc64, with the value stored in a register. Add missing
registers to reg_alloc_order. Add support for 12-bit branch relocations.
Add functions for synthetic operations: addi, mtctl, dep, shd, vshd, ori,
andi, shifts, rotates, multiply, branches, setcond. Split out TLB reads
from qemu_ld and qemu_st; fix argument loading for tlb external calls.
Generate the prologue.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Historically the qemu tlb "addend" field was used for both RAM and IO accesses,
so needed to be able to hold both host addresses (unsigned long) and guest
physical addresses (target_phys_addr_t). However since the introduction of
the iotlb field it has only been used for RAM accesses.
This means we can change the type of addend to unsigned long, and remove
associated hacks in the big-endian TCG backends.
We can also remove the host dependence from target_phys_addr_t.
Signed-off-by: Paul Brook <paul@codesourcery.com>
A few words about design choices:
* On IA64, instructions should be grouped by bundle, and dependencies
between instructions declared. A first version of this code tried to
schedule instructions automatically, but was very complex and too
invasive for the current common TCG code (ops not ending at
instruction boundaries, code retranslation breaking already generated
code, etc.) It was also not very efficient, as dependencies between
TCG ops is not available.
Instead the option taken by the current implementation does not try
to fill the bundle by scheduling instructions, but by providing ops
not available as an ia64 instruction, and by offering 22-bit constant
loading for most of the instructions. With both options the bundle are
filled at approximately the same level.
* Up to 128 registers can be affected to a function on IA64, but TCG
limits this number to 64, which is actually more than enough. The
register affectation is the following:
- r0: used to map a constant argument with value 0
- r1: global pointer
- r2, r3: internal use
- r4 to r6: not used to avoid saving them
- r7: env structure
- r8 to r11: free for TCG (call clobbered)
- r12: stack pointer
- r13: thread pointer
- r14 to r31: free for TCG (call clobbered)
- r32: reserved (return address)
- r33: reserved (PFS)
- r33 to r63: free for TCG
* The IA64 architecture has only 64-bit registers and no 32-bit
instructions (the only exception being cmp4). Therefore 64-bit
registers and instructions are used for 32-bit ops. The adopted
strategy is the same as the ABI, that is the higher 32 bits are
undefined. Most ops (and, or, add, shl, etc.) can directly use
the 64-bit registers, while some others have to sign-extend (sar,
div, etc.) or zero-extend (shr, divu, etc.) the register first.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This adds vhost net device support in qemu. Will be tied to tap device
and virtio by following patches. Raw backend is currently missing,
will be worked on/submitted separately.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Use kinfo_getvmmap(3) on FeeBSD >= 7.x and /compat/linux/proc on older
FreeBSD. (kinfo_getvmmap is preferred since /compat/linux/proc is
usually only mounted on hosts also using the Linuxolator.)
This patch is a bit hacky because the includes needed for kinfo_getvmmap
conflict with other definitions in exec.c by default so I had to `trick
around' a little, but I built the result in FreeBSD 6.4-stable and
7.2-stable tbs and on 8-stable on the host so the hacks at least
should be stable. (If this is a problem maybe we could also move the
kinfo_getvmmap invocations into a seperate source file but that would
be more work...)
Signed-off-by: Juergen Lock <nox@jelal.kn-bremen.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
New syscall which gets actively used when you have a
fresh kernel.
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
--sysconfdir requires a parameter (the path), this should be reflected
in the case pattern.
Reported-by: Frank Arnold <frank.arnold@amd.com>
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
These files are created by configure and grow
unnecessarily at each new call of configure:
roms/seabios/config.mak
roms/vgabios/config.mak
libhw32/config.mak
libhw64/config.mak
libhw32/config.mak and libhw64/config.mak set
compiler options, and the wrong old code results
in very long command lines.
The new code always writes a new config.mak
instead of appending to an existing one.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To create html output from texi input, texi2html was used.
Output from makeinfo looks cleaner, so replace the old rule
and use makeinfo now.
For those who want to use their own variant of html output,
the macros MAKEINFO and MAKEINFOFLAGS allow customisation.
Option "-I ." is not needed (the current directory is
searched by default), so remove it.
Please note that the build requirements changed, too:
makeinfo is required for doc builds.
texi2html is no longer used.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Starting with mingw32-runtime 3.15, C99/POSIX
format strings (%zu, %lld, ...) are supported
by defining __USE_MINGW_ANSI_STDIO=1.
As QEMU uses such format strings, unconditionally
define this macro. It won't hurt on older revisions
of mingw32-runtime.
Tested with manually installed mingw32-runtime 3.15
on debian (cross compiled + wine).
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add configure options (--enable-debug-mon and --disable-debug-mon)
plus the MON_DEBUG() macro.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The static compilation for sdl is broken after
7942769317.
Signed-off-by: TeLeMan <geleman@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This patch adds the documentation-related options "--enable-docs" and
"--disable-docs" to the help message of "configure".
Signed-off-by: Dirk Ullrich <dirk.ullrich@googlemail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add -static to LDFLAGS earlier as to run the compile_prog() tests with
this flags, this will avoid turning on features for which a shared
library is available but not a static one.
Signed-off-by: Loïc Minier <lool@dooz.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Commit a0f291fc10 has enabled
-fstack-protector-all on all targets, as the configure test is bogus.
GCC only emits a warning and not an error if this option is not
supported, so the configure scripts doesn't detect the problem.
This patch changes the configure script to try the various flags
with -Werror in addition to catch the possible warnings.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add has() and path_of() funcs and use them across configure; has()
will test whether a command or builtin is available; path_of() will
search the PATH for executables and return the full pathname if found.
Signed-off-by: Loïc Minier <lool@dooz.org
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Check whether sdl-config is available before calling it, otherwise
./configure triggers a warning:
./configure: 957: sdl-config: not found
If neither the .pc file not sdl-config are present, disable SDL support.
Signed-off-by: Loïc Minier <lool@dooz.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
_FORTIFY_SOURCE is a Glibc feature which adds memory and string function
protection.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The default value is ${prefix}/etc/qemu. --sysconfdir can be used to override
the default to an absolute path. The expectation is that when installed to
/usr, --sysconfdir=/etc/qemu will be used.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Together with the first patch this enables using the prefixed
pkg-config, thus picking up the correct flags for SDL.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
After the next commit, pkg-config could be used for the shared library
configuration case and sdl-config for static libraries. So I prepare
the test here by doing two changes:
at the same time I remove useless backslashes from the invocation of
grep;
1) fixing a typo ($sd_cflags). The typo has been there since commit
1ac88f2 (remove sdl_static. Just do the right thing if static is yes,
2009-07-27).
2) fixing an erroneous "test `... | grep > /dev/null`" idiom that would
never succeed since grep's output would be empty;
3) checking the status code after executing sdl-config --static --libs;
this is needed for the next patch only.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Since pkgconfig can give different output for different targets,
it should be tried with the cross-compilation prefix first.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Will be required for upcoming KVM cpuid leaf. Host kernels >= 2.6.32 as
well as future kvm-kmod releases (more recent than kvm-kmod-2.6.32.3)
do/will provide them.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Since kvm-kmod-2.6.32.2 we have an alternative source for recent KVM
kernel headers. Use it when available and not overruled by --kerneldir.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This adds a few more vpath suffixes and points the remaining two paths
explicitly to $(SRC_PATH) in order to eliminate the VPATH assignment
from config-host.mak.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Juan has contributed a cool Makefile infrastructure that enables us to drop
static libraries completely:
Move shared obj-y definitions to Makefile.objs, prefixed {common-,hw-,user-},
and link those object files directly into the executables.
Replace HWLIB by HWDIR, specifying only the directory.
Drop --whole-archive and ARLIBS in Makefiles and configure.
Drop GENERATED_HEADERS dependency in rules.mak, since this rebuilds all
common objects after generating a target-specific header; add dependency
rules to Makefile and Makefile.target instead.
v2:
- Don't try to include /config.mak for user emulators
- Changes to user object paths ("Quickfix for libuser.a drop") were obsoleted
by "user_only: compile everything with -fpie" (Kirill A. Shutemov)
v3:
- Fix dependency modelling for tools
- Remove comment on GENERATED_HEADERS obsoleted by this patch
Signed-off-by: Andreas Färber <afaerber@opensolaris.org>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Palle Lyckegaard <palle@lyckegaard.dk>
Cc: Ben Taylor <bentaylor.solx86@gmail.com>
Cc: Juan Quintela <quintela@trasno.org>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
basename() needs #include <libgen.h>.
No prototype for daemon() is available on Solaris, but link
succeeds.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
We really need compile _all_ sources for user target with -fpie when
use --enable-user-pie.
It's regression introduced by commit add16157d7.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
qemu_malloc() does not allow size=0 to be passed in and aborts on this behavior.
Unfortunately, there is good reason to believe that within qemu, there are a
number of, so far, undetected places that assume size=0 can be safely passed.
Since we do not want to abort unnecessarily in production builds, return
qemu_malloc(1) whenever the version file indicates that this is a production
build.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
S390x was one of the first platforms that received support for KVM back in the
day. Unfortunately until now there hasn't been a qemu implementation that would
enable users to actually run guests.
So let's include support for KVM S390x in qemu!
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This patch makes configure aware of S390 hosts and guests. When not explicitly
defined using --target-list= no S390 targets will be built though.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
To avoid the build failing with:
gcc -Wall -Wstrict-prototypes -Werror -fomit-frame-pointer -fno-
builtin -I/export/home/andreas/QEMU/qemu -Wall -Wstrict-prototypes -
Werror -fomit-frame-pointer -fno-builtin -I/export/home/andreas/QEMU/
qemu -c -o multiboot.o multiboot.S
/var/tmp//ccd3aWyk.s: Assembler messages:
/var/tmp//ccd3aWyk.s:15: Error: value of 512 too large for field of 1
bytes at 0000000000000002
gmake[1]: *** [multiboot.o] Error 1
disable recursion into pc-bios/optionrom, as done for Darwin already.
Signed-off-by: Andreas Faerber <andreas.faerber@web.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We're leaking file descriptors to child processes. Set FD_CLOEXEC on file
descriptors that don't need to be passed to children to stop this misbehaviour.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
linux-user build on fedora 11 breaks because fallocate
is broken on that system if -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64
are specified, which is what QEMU uses.
We do have a configure check to catch this and disable fallocate,
however, it turns out that default QEMU_CFLAGS/LDFLAGS were assigned in
script *after* all compiler checks: so during checks we were not running
compiler with same flags that we used for build later.
Fix this by moving QEMU_CFLAGS to before compiler checks, and using
comple_prog when checking for fallocate. This also fixes the fact that
we do some compiler checks while assigning the flags, right below a
comment that says "no cc tests beyond this point".
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Based on a patch from Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org>
A few words about design choices:
* Two registers, at and t0, are reserved for TCG internal use. They are
useful for bswap and 64-bit ops.
* Most ops supports a constant argument with value 0, which is actually
mapped to the zero register.
* While the at register is available for constant loading, ops only
support a limited range of constants. TCG does a better job doing the
register allocation and constant loading by itself. There are plenty of
registers available anyway.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add makefile dependencies for target specific device configs.
These will copy the default config if none exists, obsoleting the old
configure time code. If a config already exists but is older than the
default then print a warning.
Also remove config-devices.h. Code does not and should not care which
devices are being built.
Signed-off-by: Paul Brook <paul@codesourcery.com>
* Replace vill -> will.
* Comment was formatted to make it more readable
and to conform to the coding standard, too.
* Description of foo="" was completed.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Since c32d766af1, qemu-io should be
portable. It is currently built only on linux and mingw32.
This patch enables qemu-io on all platforms. Tested on FreeBSD.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Link with -lpulse in addition to -lpulse-simple, needed when --no-add-needed
is passed to the linker (gold default).
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
We have a function for this which does not issue annoying warnings.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We have code for a quite a few block formats. While I trust that all
of these formats are useful at least for some people in some
circumstances, some of them are of a kind that friends don't let
friends use in production.
This patch provides an optional block format whitelist, default off.
If a whitelist is configured with --block-drv-whitelist, QEMU proper
can use only whitelisted formats. Other programs, like qemu-img, are
not affected.
Drivers for formats off the whitelist still participate in format
probing, to ensure all programs probe exactly the same. Without that,
QEMU proper would be prone to treat images with a format off the
whitelist as raw when the image's format is probed.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
You would only see this error on a fresh clone when srcdir == objdir. configure
will fail because roms/pcbios doesn't exist.
git submodule integration doesn't cleanup very well when switching between
branches so you'll get an roms/pcbios directory from normal operations if you
switch between old branches.
Thanks to a mistake in configure, if you build outside of srcdir, you'll also
get a valid roms/pcbios.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
So I can add a tap-linux.c and use CONFIG_LINUX to pull it in
in Makefile
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
updated fallocate check to new configure, added dup3 check as suggested
by Jan-Simon Möller.
Riku: updated to apply to current git.
Signed-off-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
This suite contains tests to assure that QList API works as expected.
To execute it you should have check installed and build QEMU with
check support enabled (--enable-check-utests) and then run:
$ ./check-qlist
Patchworks-ID: 35333
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
First user of new config-devices.mak
Patchworks-ID: 35198
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We generate config-devices.h from there automatically.
We need to do it in main Makefile, because we are going to need a main
Makefile for them.
Patchworks-ID: 35196
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add config.h file that includes config-target.h and config-host.h
Patchworks-ID: 35193
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Use timestamp based appreach to avoid not needed recompilation.
Add it to rules.mak
Many thanks to Paolo Bonzini for helpding the design, and the debug.
Patchworks-ID: 35190
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Include it directly in Makefile.target
Patchworks-ID: 35189
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This time, I add them in configure only if target compiler supports it
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If available, the Universally Unique Identifier library
is used by the vdi block driver.
Other parts of QEMU (vl.c) could also use it.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Change "ERROR: configure was not able to found it" to
"ERROR: configure was not able to find it".
Signed-off-by: Sebastian Herbszt <herbszt@gmx.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
While i386, x86_64 and Sparc64/OpenBSD still worked after
df70204db5, Sparc32 and Sparc64 Linux hosts
broke.
Partially revert the commit: make the restored code conditional to
!CONFIG_USER_PIE.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Build uset targers as true PIE if user want to keep qemu
self-virtualizable.
v5:
- Split into to patches: drop link hack and add PIE support
- do not build PIE by default and drop toolchain check
v4:
- Add test for toolchain if it has proper PIE support
v3:
- One more pice of the hack was removed
- Description updated
v2:
- Add configure options do enable/disable PIE for usermode targets.
Disabling can be useful if you build uswing toolchain which has
broken PIE support. PIE for usermode targets enabled by default.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
There is a link hack in linux-user which produces an executable that
looks like PIE, but always has text relocations since all object files
isn't position-independent (compiled without -fpic/-fpie). Dynamic loader
has to do more work to load a binary with text relocations.
The best way to keep this functionality is to build a true PIE without
text relocations.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Usermode targets are hardware-independed.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Acked-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
We need to define _XOPEN_SOURCE and __EXTENSIONS__ macros in order to get
CMSG_ and TIOCWIN macros defined. But then _POSIX_C_SOURCE gets defined, which
is (incorrectly) used as an indicator for existence of posix_memalign() in osdep.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
We should set $linux_aio to 'no' if detection failed, otherwise
its contents will be empty, which is a bug as we test for 'yes'
or 'no'.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* Add missing include for struct timeval.
* Replace non-portable strsep by local qemu_strsep.
* Use POSIX basename by including libgen.h.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This suite contains tests to assure that QDict API works as expected.
To execute it you should have check installed and build QEMU with
check support enabled (--enable-check-utests) and then run:
$ ./check-qdict
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This suite contains tests to assure that QString API works as expected.
To execute it you should have check installed and build QEMU with
check support enabled (--enable-check-utests) and then run:
$ ./check-qstring
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This suite contains tests to assure that QInt API works as expected.
To execute it you should have check installed and build QEMU with
check support enabled (--enable-check-utests) and then run:
$ ./check-qint
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Check is a unit testing framework for C.
All the QObjects have unit-tests and more will be written for the
future data types.
More info about check can be found at:
http://check.sourceforge.net/
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now that do have a nicer interface to work against we can add Linux native
AIO support. It's an extremly thing layer just setting up an iocb for
the io_submit system call in the submission path, and registering an
eventfd with the qemu poll handler to do complete the iocbs directly
from there.
This started out based on Anthony's earlier AIO patch, but after
estimated 42,000 rewrites and just as many build system changes
there's not much left of it.
To enable native kernel aio use the aio=native sub-command on the
drive command line. I have also added an option to qemu-io to
test the aio support without needing a guest.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Once there, move to a proper test to see if we are going to use it or not
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Extra error message is only given if --enable-kvm was given
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
All other features are named foo and enabled with --enable-foo.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Once there, remove extra check for package and output if bluez was found or not as the other features
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Straightforward implementation. This syscall is rare enough that we
don't need to support the odder cases, just disable it if host glibc
is too old.
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
As requested by Anthony make pthreads mandatory. This means we will always
have AIO available on posix hosts, and it will also allow enabling the I/O
thread unconditionally once it's ready.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
kqemu introduces a number of restrictions on the i386 target. The worst is that
it prevents large memory from working in the default build.
Furthermore, kqemu is fundamentally flawed in a number of ways. It relies on
the TSC as a time source which will not be reliable on a multiple processor
system in userspace. Since most modern processors are multicore, this severely
limits the utility of kqemu.
kvm is a viable alternative for people looking to accelerate qemu and has the
benefit of being supported by the upstream Linux kernel. If someone can
implement work arounds to remove the restrictions introduced by kqemu, I'm
happy to avoid and/or revert this patch.
N.B. kqemu will still function in the 0.11 series but this patch removes it from
the 0.12 series.
Paul, please Ack or Nack this patch.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Second attempt failed due to $_ not being standard and as such it's
interpretation by certain shells when they were symlinked to /bin/sh
and invoked as such led to unpredictable results. So instead of trying
to be clever just use /bin/sh directly (That's what direct execution
would have led to anyway)
Hopefully this time nothing will break (Mingw?)
Thanks to Jordan Justen for report and analysis.
[Previous attempt (THISSHELL one) deserves a credit but reporter is
too humble]
Signed-off-by: malc <av1474@comtv.ru>
http://www.opengroup.org/onlinepubs/7990989775/xbd/envvar.html
<quote>
SHELL
A pathname of the user's preferred command language
interpreter. If this interpreter does not conform to the XSI Shell
Command Language in the XCU specification, Shell Command Language,
utilities may behave differently from those described in this
specification set.
</quote>
So using shells for users who prefer csh variants is a no go.
It is used only for softmmu variables
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
Calculate its value in ./configure.
Put together all its uses
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Message-Id:
