The two thing that should be handled are cipher and ivgen. For ivgen
the solution is just mutex, as iv calculations should not be long in
comparison with encryption/decryption. And for cipher let's just keep
per-thread ciphers.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Format drivers such as qcow2 don't allow sharing the same image between
two QEMU instances in order to prevent image corruptions, because of
metadata cache. LUKS driver don't modify metadata except for when
creating image, so it is safe to relax the permission. This makes
share-rw=on property work on virtual devices.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
block_crypto_open_opts_init() and block_crypto_create_opts_init()
contain a virtual visit of QCryptoBlockOptions and
QCryptoBlockCreateOptions less member "format", respectively.
Change their callers to put member "format" in the QDict, so they can
use the generated visitors for these types instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_truncate() is an operation that can block (even for a quite long
time, depending on the PreallocMode) in I/O paths that shouldn't block.
Convert it to a coroutine_fn so that we have the infrastructure for
drivers to make their .bdrv_co_truncate implementation asynchronous.
This change could potentially introduce new race conditions because
bdrv_truncate() isn't necessarily executed atomically any more. Whether
this is a problem needs to be evaluated for each block driver that
supports truncate:
* file-posix/win32, gluster, iscsi, nfs, rbd, ssh, sheepdog: The
protocol drivers are trivially safe because they don't actually yield
yet, so there is no change in behaviour.
* copy-on-read, crypto, raw-format: Essentially just filter drivers that
pass the request to a child node, no problem.
* qcow2: The implementation modifies metadata, so it needs to hold
s->lock to be safe with concurrent I/O requests. In order to avoid
double locking, this requires pulling the locking out into
preallocate_co() and using qcow2_write_caches() instead of
bdrv_flush().
* qed: Does a single header update, this is fine without locking.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Coverity can't see that qobject_input_visitor_new_flat_confused()
returns non-null when it doesn't set @local_err. Check the return
value instead, like all the other callers do.
Fixes: CID 1393615
Fixes: CID 1393616
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Remaining uses of qobject_input_visitor_new_keyval() in the block
subsystem:
* block_crypto_open_opts_init()
Currently doesn't visit any non-string scalars, thus safe. It's
called from
- block_crypto_open_luks()
Creates the QDict with qemu_opts_to_qdict_filtered(), which
creates only string scalars, but has a TODO asking for other types.
- qcow_open()
- qcow2_open(), qcow2_co_invalidate_cache(), qcow2_reopen_prepare()
* block_crypto_create_opts_init(), called from
- block_crypto_co_create_opts_luks()
Also creates the QDict with qemu_opts_to_qdict_filtered().
* vdi_co_create_opts()
Also creates the QDict with qemu_opts_to_qdict_filtered().
Replace these uses by qobject_input_visitor_new_flat_confused() for
robustness. This adds crumpling. Right now, that's a no-op, but if
we ever extend these things in non-flat ways, crumpling will be
needed.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When pulling in headers that are in the same directory as the C file (as
opposed to one in include/), we should use its relative path, without a
directory.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Now that we can safely call QOBJECT() on QObject * as well as its
subtypes, we can have macros qobject_ref() / qobject_unref() that work
everywhere instead of having to use QINCREF() / QDECREF() for QObject
and qobject_incref() / qobject_decref() for its subtypes.
The replacement is mechanical, except I broke a long line, and added a
cast in monitor_qmp_cleanup_req_queue_locked(). Unlike
qobject_decref(), qobject_unref() doesn't accept void *.
Note that the new macros evaluate their argument exactly once, thus no
need to shout them.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, semantic conflict resolved, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Commit e39e959e fixed an invalid assertion in the .bdrv_length
implementation, but left a similar assertion in place for
.bdrv_truncate. Instead of crashing when the user requests a too large
image size, fail gracefully.
A file size of exactly INT64_MAX caused failure before, but is actually
legal.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When you request an image size close to UINT64_MAX, the addition of the
crypto header may cause an integer overflow. Catch it instead of
silently truncating the image size.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The .bdrv_getlength implementation of the crypto block driver asserted
that the payload offset isn't after EOF. This is an invalid assertion to
make as the image file could be corrupted. Instead, check it and return
-EIO if the file is too small for the payload offset.
Zero length images are fine, so trigger -EIO only on offset > len, not
on offset >= len as the assertion did before.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This adds the .bdrv_co_create driver callback to luks, which enables
image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Everything that refers to the protocol layer or QemuOpts is moved out of
block_crypto_create_generic(), so that the remaining function is
suitable to be called by a .bdrv_co_create implementation.
LUKS is the only driver that actually implements the old interface, and
we don't intend to use it in any new drivers, so put the moved out code
directly into a LUKS function rather than creating a generic
intermediate one.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The crypto driver used to create the image file in a callback from the
crypto subsystem. If we want to implement .bdrv_co_create, this needs to
go away because that callback will get a reference to an already
existing block node.
Move the image file creation to block_crypto_create_generic().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If the bdrv_reopen_prepare helper isn't provided, the qemu-img commit
command fails to re-open the base layer after committing changes into
it. Provide a no-op implementation for the LUKS driver, since there
is not any custom work that needs doing to re-open it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJanYJPAAoJEH8JsnLIjy/WxjUQAJA+DTOmGXvaNpMs65BrU79K
/r/iGVrzHv/RMLmrWMnqj96W9SnpMuiAP9hVLNsekqClY9q4ME4DpGcXhWfhSvF5
FC51ehvFJdfo8cPorsevcqNj60iWebjcx3lFfUq2606UOyYih3oijYxr6gSwWbRc
GAgdGMqsvGYpzgqAQVEWHUhaX0La49/OzY42aR+E+LCBNfTYvlydvyoc+tUTdIpW
1eM/ASGndGsN0Cf2vxlbKgJ0/P6v+cRZuuIDhKZqre+YG+yM+pq7yZb+o7nf/P36
TPR93BsT7FSVAizRK7VFRuPIynHpiaxYygrJERCXF0sxsV4OlKjpmt/uUPamWFh+
46Jx2NK1AuAx87BdErgmA119ObO3oAPxK0+2p981obb6SphTbbPxDj6SOlYCt4mJ
mhff4JtIiwCmDSckAwd2mkBI1Tvl9qqcELrpyd2t2eU4ec2vf7fPd85EsK/Mq6Kr
dbfqFvjNaaMxChoqFgkHAveYJ7zYqRFI2IY5o9c1QyZehCGPWjScxHXZZYdpDl59
YF9DkYQDOyvEX2jmMECaO1r/0nnO+BqQHu5ItJuTte9rjP9Q0do3iBISiIefewtf
yji6/QNn2hFrnr1HPAwLFFC3kPgc8Mq8mIUb53j8vG/01KhVRCcnJm2K6D4IUwLZ
S6ZnQJB97eE4y7YR5dNt
=2axz
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Mon 05 Mar 2018 17:45:51 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (38 commits)
block: Fix NULL dereference on empty drive error
qcow2: Replace align_offset() with ROUND_UP()
block/ssh: Add basic .bdrv_truncate()
block/ssh: Make ssh_grow_file() blocking
block/ssh: Pull ssh_grow_file() from ssh_create()
qemu-img: Make resize error message more general
qcow2: make qcow2_co_create2() a coroutine_fn
block: rename .bdrv_create() to .bdrv_co_create_opts()
Revert "IDE: Do not flush empty CDROM drives"
block: test blk_aio_flush() with blk->root == NULL
block: add BlockBackend->in_flight counter
block: extract AIO_WAIT_WHILE() from BlockDriverState
aio: rename aio_context_in_iothread() to in_aio_context_home_thread()
docs: document how to use the l2-cache-entry-size parameter
specs/qcow2: Fix documentation of the compressed cluster descriptor
iotest 033: add misaligned write-zeroes test via truncate
block: fix write with zero flag set and iovector provided
block: Drop unused .bdrv_co_get_block_status()
vvfat: Switch to .bdrv_co_block_status()
vpc: Switch to .bdrv_co_block_status()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# include/block/block.h
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.
The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h. Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.
To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects. The next commit will
improve it further.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
BlockDriver->bdrv_create() has been called from coroutine context since
commit 5b7e1542cf ("block: make
bdrv_create adopt coroutine").
Make this explicit by renaming to .bdrv_co_create_opts() and add the
coroutine_fn annotation. This makes it obvious to block driver authors
that they may yield, use CoMutex, or other coroutine_fn APIs.
bdrv_co_create is reserved for the QAPI-based version that Kevin is
working on.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20170705102231.20711-2-stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We don't need the can_write_zeroes_with_unmap field in
BlockDriverInfo, because it is redundant information with
supported_zero_flags & BDRV_REQ_MAY_UNMAP. Note that
BlockDriverInfo and supported_zero_flags are both per-device
settings, rather than global state about the driver as a
whole, which means one or both of these bits of information
can already be conditional. Let's audit how they were set:
crypto: always setting can_write_ to false is pointless (the
struct starts life zero-initialized), no use of supported_
nbd: just recently fixed to set can_write_ if supported_
includes MAY_UNMAP (thus this commit effectively reverts
bca80059e and solves the problem mentioned there in a more
global way)
file-posix, iscsi, qcow2: can_write_ is conditional, while
supported_ was unconditional; but passing MAY_UNMAP would
fail with ENOTSUP if the condition wasn't met
qed: can_write_ is unconditional, but pwrite_zeroes lacks
support for MAY_UNMAP and supported_ is not set. Perhaps
support can be added later (since it would be similar to
qcow2), but for now claiming false is no real loss
all other drivers: can_write_ is not set, and supported_ is
either unset or a passthrough
Simplify the code by moving the conditional into
supported_zero_flags for all drivers, then dropping the
now-unused BDI field. For callers that relied on
bdrv_can_write_zeroes_with_unmap(), we return the same
per-device settings for drivers that had conditions (no
observable change in behavior there); and can now return
true (instead of false) for drivers that support passthrough
(for example, the commit driver) which gives those drivers
the same fix as nbd just got in bca80059e. For callers that
relied on supported_zero_flags, we now have a few more places
that can avoid a wasted call to pwrite_zeroes() that will
just fail with ENOTSUP.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180126193439.20219-1-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
qemu-common.h includes qemu/option.h, but most places that include the
former don't actually need the latter. Drop the include, and add it
to the places that actually need it.
While there, drop superfluous includes of both headers, and
separate #include from file comment with a blank line.
This cleanup makes the number of objects depending on qemu/option.h
drop from 4545 (out of 4743) to 284 in my "build everything" tree.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-20-armbru@redhat.com>
[Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
The BDRV_REQ_FUA flag can trivially be allowed in the crypt driver
as a passthrough to the underlying block driver.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170927125340.12360-7-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Instead of sector offset, take the bytes offset when encrypting
or decrypting data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170927125340.12360-6-berrange@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Make the crypto driver implement the bdrv_co_preadv|pwritev
callbacks, and also use bdrv_co_preadv|pwritev for I/O
with the protocol driver beneath. This replaces sector based
I/O with byte based I/O, and allows us to stop assuming the
physical sector size matches the encryption sector size.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170927125340.12360-5-berrange@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The crypto APIs report the offset of the data payload as an uint64_t
type, but the block driver is casting to size_t or ssize_t which will
potentially truncate.
Most of the block APIs use int64_t for offsets meanwhile, so even if
using uint64_t in the crypto block driver we are still at risk of
truncation.
Change the block crypto driver to use uint64_t, but add asserts that
the value is less than INT64_MAX.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170927125340.12360-4-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Using 16KB bounce buffers creates a significant performance
penalty for I/O to encrypted volumes on storage which high
I/O latency (rotating rust & network drives), because it
triggers lots of fairly small I/O operations.
On tests with rotating rust, and cache=none|directsync,
write speed increased from 2MiB/s to 32MiB/s, on a par
with that achieved by the in-kernel luks driver. With
other cache modes the in-kernel driver is still notably
faster because it is able to report completion of the
I/O request before any encryption is done, while the
in-QEMU driver must encrypt the data before completion.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170927125340.12360-2-berrange@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
For block drivers that just pass a truncate request to the underlying
protocol, we can now pass the preallocation mode instead of aborting if
it is not PREALLOC_MODE_OFF.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add a PreallocMode parameter to the bdrv_truncate() function implemented
by each block driver. Currently, we always pass PREALLOC_MODE_OFF and no
driver accepts anything else.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
While the crypto layer uses a fixed option name "key-secret",
the upper block layer may have a prefix on the options. e.g.
"encrypt.key-secret", in order to avoid clashes between crypto
option names & other block option names. To ensure the crypto
layer can report accurate error messages, we must tell it what
option name prefix was used.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-19-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now that all encryption keys must be provided upfront via
the QCryptoSecret API and associated block driver properties
there is no need for any explicit encryption handling APIs
in the block layer. Encryption can be handled transparently
within the block driver. We only retain an API for querying
whether an image is encrypted or not, since that is a
potentially useful piece of metadata to report to the user.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-18-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This converts the qcow driver to make use of the QCryptoBlock
APIs for encrypting image content. This is only wired up to
permit use of the legacy QCow encryption format. Users who wish
to have the strong LUKS format should switch to qcow2 instead.
With this change it is now required to use the QCryptoSecret
object for providing passwords, instead of the current block
password APIs / interactive prompting.
$QEMU \
-object secret,id=sec0,file=/home/berrange/encrypted.pw \
-drive file=/home/berrange/encrypted.qcow,encrypt.format=aes,\
encrypt.key-secret=sec0
Though note that running QEMU system emulators with the AES
encryption is no longer supported, so while the above syntax
is valid, QEMU will refuse to actually run the VM in this
particular example.
Likewise when creating images with the legacy AES-CBC format
qemu-img create -f qcow \
--object secret,id=sec0,file=/home/berrange/encrypted.pw \
-o encrypt.format=aes,encrypt.key-secret=sec0 \
/home/berrange/encrypted.qcow 64M
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-10-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
When integrating the crypto support with qcow/qcow2, we don't
want to use the bare LUKS option names "hash-alg", "key-secret",
etc. We need to namespace them to match the nested QAPI schema.
e.g. "encrypt.hash-alg", "encrypt.key-secret"
so that they don't clash with any general qcow options at a later
date.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-3-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The block/crypto.c defines a set of QemuOpts that provide
parameters for encryption. This will also be needed by
the qcow/qcow2 integration, so expose the relevant pieces
in a new block/crypto.h header. Some helper methods taking
QemuOpts are changed to take QDict to simplify usage in
other places.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-2-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Previous commit moved 'opaque' to be the 2nd parameter in the list:
commit 375092332e
Author: Fam Zheng <famz@redhat.com>
Date: Fri Apr 21 20:27:02 2017 +0800
crypto: Make errp the last parameter of functions
Move opaque to 2nd instead of the 2nd to last, so that compilers help
check with the conversion.
this puts it back to the 2nd to last position.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add an Error parameter to the block drivers' bdrv_truncate() interface.
If a block driver does not set this in case of an error, the generic
bdrv_truncate() implementation will do so.
Where it is obvious, this patch also makes some block drivers set this
value.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170328205129.15138-4-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
For one thing, this allows us to drop the error message generation from
qemu-img.c and blockdev.c and instead have it unified in
bdrv_truncate().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170328205129.15138-3-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Move opaque to 2nd instead of the 2nd to last, so that compilers help
check with the conversion.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170421122710.15373-7-famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Commit message typo corrected]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This makes use of the .bdrv_child_perm() implementation for formats that
we just added. All format drivers expose the permissions they actually
need nows, so that they can be set accordingly and updated when parents
are attached or detached.
The only format not included here is raw, which was already converted
with the other filter drivers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
The way that attaching bs->file worked was a bit unusual in that it was
the only child that would be attached to a node which is not opened yet.
Because of this, the block layer couldn't know yet which permissions the
driver would eventually need.
This patch moves the point where bs->file is attached to the beginning
of the individual .bdrv_open() implementations, so drivers already know
what they are going to do with the child. This is also more consistent
with how driver-specific children work.
For a moment, bdrv_open() gets its own BdrvChild to perform image
probing, but instead of directly assigning this BdrvChild to the BDS, it
becomes a temporary one and the node name is passed as an option to the
drivers, so that they can simply use bdrv_open_child() to create another
reference for their own use.
This duplicated child for (the not opened yet) bs is not the final
state, a follow-up patch will change the image probing code to use a
BlockBackend, which is completely independent of bs.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
As protection against bruteforcing passphrases, the PBKDF
algorithm is tuned by counting the number of iterations
needed to produce 1 second of running time. If the machine
that the image will be used on is much faster than the
machine where the image is created, it can be desirable
to raise the number of iterations. This change adds a new
'iter-time' property that allows the user to choose the
iteration wallclock time.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The qemu-img info command has the ability to expose format
specific metadata about volumes. Wire up this facility for
the LUKS driver to report on cipher configuration and key
slot usage.
$ qemu-img info ~/VirtualMachines/demo.luks
image: /home/berrange/VirtualMachines/demo.luks
file format: luks
virtual size: 98M (102760448 bytes)
disk size: 100M
encrypted: yes
Format specific information:
ivgen alg: plain64
hash alg: sha1
cipher alg: aes-128
uuid: 6ddee74b-3a22-408c-8909-6789d4fa2594
cipher mode: xts
slots:
[0]:
active: true
iters: 572706
key offset: 4096
stripes: 4000
[1]:
active: false
key offset: 135168
[2]:
active: false
key offset: 266240
[3]:
active: false
key offset: 397312
[4]:
active: false
key offset: 528384
[5]:
active: false
key offset: 659456
[6]:
active: false
key offset: 790528
[7]:
active: false
key offset: 921600
payload offset: 2097152
master key iters: 142375
One somewhat undesirable artifact is that the data fields are
printed out in (apparently) random order. This will be addressed
later by changing the way the block layer pretty-prints the
image specific data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1469192015-16487-3-git-send-email-berrange@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=BgpV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2016-07-06' into staging
QAPI patches for 2016-07-06
# gpg: Signature made Wed 06 Jul 2016 10:00:51 BST
# gpg: using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2016-07-06:
replay: Use new QAPI cloning
sockets: Use new QAPI cloning
qapi: Add new clone visitor
qapi: Add new visit_complete() function
tests: Factor out common code in qapi output tests
tests: Clean up test-string-output-visitor
qmp-output-visitor: Favor new visit_free() function
string-output-visitor: Favor new visit_free() function
qmp-input-visitor: Favor new visit_free() function
string-input-visitor: Favor new visit_free() function
opts-visitor: Favor new visit_free() function
qapi: Add new visit_free() function
qapi: Add parameter to visit_end_*
qemu-img: Don't leak errors when outputting JSON
qapi: Improve use of qmp/types.h
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we have a polymorphic visit_free(), we no longer need
opts_visitor_cleanup(); which in turn means we no longer need
to return a subtype from opts_visitor_new() nor a public upcast
function.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-6-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Rather than making the dealloc visitor track of stack of pointers
remembered during visit_start_* in order to free them during
visit_end_*, it's a lot easier to just make all callers pass the
same pointer to visit_end_*. The generated code has access to the
same pointer, while all other users are doing virtual walks and
can pass NULL. The dealloc visitor is then greatly simplified.
All three visit_end_*() functions intentionally take a void**,
even though the visit_start_*() functions differ between void**,
GenericList**, and GenericAlternate**. This is done for several
reasons: when doing a virtual walk, passing NULL doesn't care
what the type is, but when doing a generated walk, we already
have to cast the caller's specific FOO* to call visit_start,
while using void** lets us use visit_end without a cast. Also,
an upcoming patch will add a clone visitor that wants to use
the same implementation for all three visit_end callbacks,
which is made easier if all three share the same signature.
For visitors with already track per-object state (the QMP visitors
via a stack, and the string visitors which do not allow nesting),
add an assertion that the caller is indeed passing the same
pointer to paired calls.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1465490926-28625-4-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Using int for values that are only used as booleans is confusing.
While at it, rearrange a couple of members so that all the bools
are contiguous.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
