-global lets you set a nice booby-trap for yourself:
$ qemu-system-x86_64 -nodefaults -S -display none -usb -monitor stdio -global usb-mouse.usb_version=l
QEMU 2.1.94 monitor - type 'help' for more information
(qemu) device_add usb-mouse
Parameter 'usb_version' expects an int64 value or range
$ echo $?
1
Not nice. Until commit 3196270 we even abort()ed.
The same error triggers if you manage to screw up a machine type's
compat_props. To demonstrate, change HW_COMPAT_2_1's entry to
.driver = "usb-mouse",\
.property = "usb_version",\
.value = "1", \
Then run
$ qemu-system-x86_64 -usb -M pc-i440fx-2.1 -device usb-mouse
upstream-qemu: -device usb-mouse: Parameter 'usb_version' expects an int64 value or range
$ echo $?
1
One of our creatively cruel error messages.
Since this is actually a coding error, we *should* abort() here.
Replace the error by an assertion failure in this case.
But turn the fatal error into a mere warning when the faulty
GlobalProperty comes from the user. Looks like this:
$ qemu-system-x86_64 -nodefaults -S -display none -usb -monitor stdio -global usb-mouse.usb_version=l
QEMU 2.1.94 monitor - type 'help' for more information
(qemu) device_add usb-mouse
Warning: global usb-mouse.usb_version=l ignored (Parameter 'usb_version' expects an int64 value or range)
(qemu)
This is consistent with how we handle similarly unusable -global in
qdev_prop_check_globals().
You could argue that the error should make device_add fail. Would be
harder, because we're running within TypeInfo's instance_post_init()
method device_post_init(), which can't fail.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
We get two error messages: a specific one from qdev_init(), and a
generic one from qdev_init_nofail(). The specific one gets suppressed
in QMP context. qdev_init_nofail() failing there is a bug, though.
Cut out the qdev_init() middle-man: realize the device, and on error
exit with a single error message.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Currently when *obj is not a TYPE_DEVICE, QEMU will abort. This patch
fixes it. When *obj is not a TYPE_DEVICE, just do not add it to hotpluggable
device list.
This patch also fixes the following issue:
1. boot QEMU using cli:
$ /opt/qemu-git-arm/bin/qemu-system-x86_64 -monitor stdio -enable-kvm \
-device virtio-scsi-pci,id=scsi0
2. device_del scsi0 via hmp using tab key(first input device_del, then press
"Tab" key).
(qemu) device_del
After step 2, QEMU will abort.
(qemu) device_del hw/core/qdev.c:930:qdev_build_hotpluggable_device_list:
Object 0x5555563a2460 is not an instance of type device
Signed-off-by: Jun Li <junmuzi@gmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
commit 6b1566c (qdev: Introduce FWPathProvider interface) did a
good job for supproting to get firmware path on some different
architectures.
Moreover further more, we can use the interface to get firmware
path name for a device which isn't attached a specific bus,
such as virtio-bus, scsi-bus etc.
When the device (such as vhost-scsi) realize the TYPE_FW_PATH_PROVIDER
interface, we should introduce a new function to get the correct firmware
path name for it.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Xen ioreq-server API, introduced in Xen 4.5, requires that PCI device
models explicitly register with Xen for config space accesses. This patch
adds a listener interface into qdev-core which can be used by the Xen
interface code to monitor for arrival and departure of PCI devices.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The commits:
- 6a1fa9f5 (monitor: add del completion for peripheral device)
- 66e56b13 (qdev: add qdev_build_hotpluggable_device_list helper)
cause a QEMU crash when trying to use HMP device_del auto-completion.
It can be easily reproduced by:
<qemu-bin> -enable-kvm ~/images/fedora.qcow2 -monitor stdio -device virtio-net-pci,id=vnet
(qemu) device_del
/home/mapfelba/git/upstream/qemu/hw/core/qdev.c:941:qdev_build_hotpluggable_device_list: Object 0x7f6ce04e4fe0 is not an instance of type device
Aborted (core dumped)
The root cause is qdev_build_hotpluggable_device_list going recursively over
all peripherals and their children assuming all are devices. It doesn't work
since PCI devices have at least on child which is a memory region (bus master).
Solved by observing that all devices appear as direct children of
/machine/peripheral container. No need of going recursively
over all the children.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reported-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 1417002601-20799-1-git-send-email-marcel.a@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Sysbus devices can get their IRQ lines connected to other devices. It is
possible to figure out which IRQ line a connection is on and whether a sysbus
device even provides an IRQ connector at a specific offset.
This patch exposes helpers to make this information publicly accessible. We
will need it for the platform bus dynamic sysbus enumeration.
Signed-off-by: Alexander Graf <agraf@suse.de>
MAINTAINERS updates, and AVX512 support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJUTmDNAAoJEL/70l94x66DPb0IAKKhf8IRfQZPEQgOWD2YeANd
vwAZ4JcqAl2/dbeOTrs5TXOWdoNVXUFDmeHh4zsgUB7poxsOqZ/M7N844UGR5duC
f4fKYXAkjyqocKH7dbpf/S+YuJtU40qowI02HQeEmGpZaJUjmfMAFwrguqerdMaB
pGA79948XeoAjP8jNgf1EqCqLi31GBEfiU2q05xLKxd+M0xSFIM7IM2hGZfFv7Hq
bbE2CGuCyj4NST/GH2C/22QBz9MyqFaL2prtDqoMugAHTKE7vO/rpFti9oTDRCXa
x8U/JcBf/puBNI+Kq+cdxTJicwIuqrcBkNmjP9sLv/nJ37QwEG06VDCd4Xj9mEs=
=zXqD
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
virtio-scsi fixes, the first part of dynamic sysbus devices,
MAINTAINERS updates, and AVX512 support.
# gpg: Signature made Mon 27 Oct 2014 15:12:13 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (28 commits)
aio / timers: De-document -clock
hw/scsi/virtio-scsi.c: fix the "type" use error in virtio_scsi_handle_ctrl
virtio-scsi: sense in virtio_scsi_command_complete
target-i386: add Intel AVX-512 support
get_maintainer.pl: restrict cases where it falls back to --git
get_maintainer.pl: move git loop under "if ($email) {"
qtest: fix qtest log fd should be initialized before qtest chardev
MAINTAINERS: avoid M entries that point to mailing lists
MAINTAINERS: add some tests directories
MAINTAINERS: Add more TCG files
MAINTAINERS: add myself for X86
MAINTAINERS: add Samuel Thibault as usb-serial.c and baum.c maintainer
MAINTAINERS: grab more files from Anthony's pile
target-i386: warns users when CPU threads>1 for non-Intel CPUs
sysbus: Use TYPE_DEVICE GPIO functionality
qdev: gpio: Define qdev_pass_gpios()
qdev: gpio: Remove qdev_init_gpio_out x1 restriction
qdev: gpio: delete NamedGPIOList::out
irq: Remove qemu_irq_intercept_out
qtest/irq: Rework IRQ interception
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allows a container to take ownership of GPIOs in a contained
device and automatically connect them as GPIOs to the container.
This prepares for deprecation of the SYSBUS IRQ functionality, which
has this feature. We push it up to the device level instead of sysbus
level. There's nothing sysbus specific about passing GPIOs to
containers so its a legitimate device-level generic feature.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Previously this was restricted to a single call per-dev/per-name. With
the conversion of the GPIO output state to QOM the implementation can
now handle repeated calls. Remove the restriction.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All users of GPIO outputs are fully QOMified, using QOM properties to
access the GPIO data. Delete.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To replace the old qemu_irq intercept API (which had users reaching
into qdev private state for GPIOs).
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Re-implement as a link setter. This should allow the QOM framework to
keep track of ref counts properly etc.
We need to add a default parent for the connecting input incase it's
coming from a non-qdev source. We simply parent the IRQ to the machine
in this case.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For peripheral device del completion, add a function to build a list for
hotpluggable devices.
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Set all static qdev properties' descriptions to object property's
description.
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It removes not needed anymore BusState::allow_hotplug field and
DeviceClass::unplug callback.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Check is too restrictive and does not allow
to add children to just created bus during hotplug
when the bus is part of composite device.
Removing check from bus_add_child() doesn't affect
devices creatable with device_add/del commands since
they have a similar builtin check and patch will
allow to create complex composite devices during
hotplug.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
To be used for conversion of SCSI and USB devices,
and would allow to make every HBA/USB host switch
to HotplugHandler API without touching each controller
explicitly.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It will be used in shallow conversion from legacy hotplug
mechanism and eventually replace all the uses of old mechanism
DeviceClass::unplug = qdev_simple_unplug_cb()
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It is to be called for actual device removal and
will allow to separate request and removal handling
phases of x86-CPU devices and also it's a handler
to be called for synchronously removable devices.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
'HotplugHandler.unplug' callback is currently used as async
call to issue unplug request for device that implements it.
Renaming 'unplug' callback to 'unplug_request' should help to
avoid confusion about what callback does and would allow to
introduce 'unplug' callback that would perform actual device
removal when guest is ready for it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It would allow to transparently switch detection whether Bus
is hotpluggable from allow_hotplug field to hotplug_handler
link and to drop allow_hotplug field once all users are
converted to hotplug handler API.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Within the object that contains the GPIO output. This allows for
connecting GPIO outputs via setting of a Link property.
Also clear the link value to zero. This catch-alls the case
where a device improperly inits a gpio_out (malloc instead of
malloc0).
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
To the device that contains them. This will allow for referencing
a GPIO input from it's canonical path (exciting for dynamic machine
generation!)
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Only allow a GPIO name to be one or the other. Inputs and outputs are
functionally different and should be in different namespaces. Prepares
support for the QOMification of IRQs as Links or Child objects.
The alternative is to munge names .e.g. with "-in" or "-out" suffixes
when giving QOM names. But that reduces clarity and if there are cases
out there where users want I and O with same name they can manually add
their own suffixes.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
At present, this function doesn't have partial cleanup implemented,
which will cause resource leaks in some scenarios.
Example:
1. Assume that "dc->realize(dev, &local_err)" executes successful
and local_err == NULL;
2. device hotplug in hotplug_handler_plug() executes but fails
(it is prone to occur). Then local_err != NULL;
3. error_propagate(errp, local_err) and return. But the resources
which have been allocated in dc->realize() will be leaked.
Simple backtrace:
dc->realize()
|->device_realize
|->pci_qdev_init()
|->do_pci_register_device()
|->etc.
Add fuller cleanup logic which assures that function can
goto appropriate error label as local_err population is
detected at each relevant point.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
Forcefully unrealize all children regardless of errors in earlier
iterations (if any). We should keep going with cleanup operation
rather than report an error immediately. Therefore store the first
child unrealization failure and propagate it at the end. We also
forcefully unregister vmsd and unrealize actual object, too.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
This error can not happen normally. If it happens, it indicates
something very wrong, we should abort QEMU. Moreover, the
user can only refer to /machine/peripheral or /objects, not
/machine/unattached.
While at it, remove superfluous check about local_err.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
It would be much better if we didn't terminate QEMU inside
device_post_init(), but at least exiting cleanly is better than aborting
and dumping core.
Before this patch:
$ qemu-system-x86_64 -global cpu.xxx=y
qemu-system-x86_64: Property '.xxx' not found
Aborted (core dumped)
After this patch:
$ qemu-system-x86_64 -global cpu.xxx=y
qemu-system-x86_64: Property '.xxx' not found
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-By: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTsnWTAAoJEJykq7OBq3PIKXMH/0+fWDs4ZnAl32AVmHTYFNZS
AJHkzdRCWAsq2E7jqoPficjZSy7oZMvgWN7t30SxljlhRVfilr+KXNHl0sxXFRAn
rnjWIPBATcVYpHaPcjP85YTsJitjj08eUYVD2HgbtIarQyyUdhEG5l1voAI8oxkY
7T92X+olbyI+NqdDUMvQUt0gdoptZPEnieCI5rScQQiwXKRv9uEJBYBSlTFJ5BTb
6XOszj62Yk25W3Sq74yfvvecFhNIXAOlzXqD03DSKHos0pLIJhMxEeYZrKIacBqP
HspYKFwOjRAflp3Pcv29m+6IjnL33IJJK6dou9Aou4UqsLRReDeeeiU1aX9ym2Q=
=txun
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Block pull request
# gpg: Signature made Tue 01 Jul 2014 09:47:15 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/block-pull-request: (23 commits)
block: add backing-file option to block-stream
block: extend block-commit to accept a string for the backing file
block: add helper function to determine if a BDS is in a chain
block: add QAPI command to allow live backing file change
qapi: Change back sector-count to sectors-count in quorum QAPI events.
block/cow: Avoid use of uninitialized cow_bs in error path
block: simplify bdrv_find_base() and bdrv_find_overlay()
block: make 'top' argument to block-commit optional
iotests: Add more tests to quick group
iotests: Add qemu tests to quick group
iotests: Simplify qemu-iotests-quick.sh
qemu-img create: add 'nocow' option
virtio-blk: remove need for explicit x-data-plane=on option
qdev: drop iothread property type
virtio-blk: replace x-iothread with iothread link property
virtio-blk: move qdev properties into virtio-blk.c
virtio: fix virtio-blk child refcount in transports
virtio-blk: drop virtio_blk_set_conf()
virtio-blk: use aliases instead of duplicate qdev properties
qdev: add qdev_alias_all_properties()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/bonzini/memory:
qdev: correctly send DEVICE_DELETED for recursively-deleted devices
memory: do not give a name to the internal exec.c regions
memory: MemoryRegion: Add size property
memory: MemoryRegion: Add may-overlap and priority props
memory: MemoryRegion: Add container and addr props
memory: MemoryRegion: replace owner field with QOM parent
memory: MemoryRegion: QOMify
memory: MemoryRegion: use /machine as default owner
libqtest: escape strings in QMP commands, fix leak
qom: object: Ignore refs/unrefs of NULL
qom: object: remove parent pointer when unparenting
mc146818rtc: add "rtc-time" link to "/machine/rtc"
qom: allow creating an alias of a child<> property
qom: add a generic mechanism to resolve paths
qom: add object_property_add_alias()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When a device is unparented (i.e. made completely hidden from management)
we want to send a DEVICE_DELETED event only if the device actually was
realized. This avoids raising DEVICE_DELETED events when device_add
fails.
However, this does not work right for recursively-deleted
devices: the whole tree is _first_ unrealized, _then_ unparented.
Then device_unparent sees realized==false and fails to trigger
the event. The solution is simply to move have_realized into
the DeviceState struct. If device_add fails, we never set the
new field to true and DEVICE_DELETED is not sent.
Fixes qemu-iotests testcase 067 (broken by commit 5942a19, though that
commit in turn fixed a possible segfault in the same test).
Reported-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The qdev_alias_all_properties() function creates QOM alias properties
for each qdev property on a DeviceState. This is useful for parent
objects that wish to forward property accesses to their children.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Allocate each IRQ individually on array allocations. This prepares for
QOMification of IRQs, where pointers to individual IRQs may be taken
and handed around for usage as QOM Links. The g_renew() scheme used here
is too fragile and would break all existing links should an IRQ list
be extended.
We now have to pass the IRQ count to qemu_free_irqs(). We have so few
call sites however, so this change is reasonably trivial.
Cc: agarcia@igalia.com
Cc: mst@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alberto Garcia <agarcia@igalia.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
When the patch was posted that became 5c21ce7 (qdev: Realize buses
on device realization, 2014-03-12), it included recursive realization
and unrealization of devices when the bus's "realized" property
was toggled.
However, due to the same old worries about recursive realization
and prerequisites not being realized yet, those hunks were dropped when
committing the patch. Unfortunately, this causes a use-after-free bug
(easily reproduced by a PCI hot-unplug action).
Before the patch, device_unparent behaved as follows:
for each child bus
unparent bus ----------------------------.
| for each child device |
| unparent device ---------------. |
| | unrealize device | |
| | call dc->unparent | |
| '------------------------------- |
'----------------------------------------'
unrealize device
After the patch, it behaves as follows instead:
unrealize device --------------------.
| for each child bus |
| unrealize bus (A) |
'------------------------------------'
for each child bus
unparent bus ----------------------.
| for each child device |
| unrealize device (B) |
| call dc->unparent |
'----------------------------------'
At the step marked (B) the device might use data from the bus that is
not available anymore due to step (A).
To fix this, we need to unrealize devices before step (A). To sidestep
concerns about recursive realization, only do recursive unrealization
and leave the "value && !bus->realized" case as it is.
The resulting flow is:
for each child bus
unrealize bus ---------------------.
| for each child device |
| unrealize device (B) |
| call bc->unrealize (A) |
'----------------------------------'
unrealize device
for each child bus
unparent bus ----------------------.
| for each child device |
| unparent device |
'----------------------------------'
where everything is "powered down" before it is unassembled.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
No semantic change.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
so that management could detect via QOM interface if device was
hotplugged
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add get_hotplug_handler() method to machine, and
make bus-less device use it during hotplug
as a means to discover a hotplug handler controller.
The returned controller is used to perform hotplug
actions.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Implement named GPIOs on the Device layer. Listifies the existing GPIOs
stuff using string keys. Legacy un-named GPIOs are preserved by using
a NULL name string - they are just a single matchable element in the
name list.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
QEMU supports firmware names for all devices in the QEMU tree but
some architectures expect some parts of firmware path names in different
format.
This introduces a firmware-pathname-change interface definition.
If some machines needs to redefine the firmware path format, it has
to add the TYPE_FW_PATH_PROVIDER interface to an object that is above
the device on the QOM tree (typically /machine).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Andreas Färber <afaerber@suse.de>
There are currently three types of object_property_add_link() callers:
1. The link property may be set at any time.
2. The link property of a DeviceState instance may only be set before
realize.
3. The link property may never be set, it is read-only.
Something similar can already be achieved with
object_property_add_str()'s set() argument. Follow its example and add
a check() argument to object_property_add_link().
Also provide default check() functions for case #1 and #2. Case #3 is
covered by passing a NULL function pointer.
Cc: Peter Crosthwaite <peter.crosthwaite@petalogix.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Tweaked documentation comment]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Some object_property_add_link() callers expect property deletion to
unref the link property object. Other callers expect to manage the
refcount themselves. The former are currently broken and therefore leak
the link property object.
This patch adds a flags argument to object_property_add_link() so the
caller can specify which refcount behavior they require. The new
OBJ_PROP_LINK_UNREF_ON_RELEASE flag causes the link pointer to be
unreferenced when the property is deleted.
This fixes refcount leaks in qdev.c, xilinx_axidma.c, xilinx_axienet.c,
s390-virtio-bus.c, virtio-pci.c, virtio-rng.c, and ui/console.c.
Rationale for refcount behavior:
* hw/core/qdev.c
- bus children are explicitly unreferenced, don't interfere
- parent_bus is essentially a read-only property that doesn't hold a
refcount, don't unref
- hotplug_handler is leaked, do unref
* hw/dma/xilinx_axidma.c
- rx stream "dma" links are set using set_link, therefore they
need unref
- tx streams are set using set_link, therefore they need unref
* hw/net/xilinx_axienet.c
- same reasoning as hw/dma/xilinx_axidma.c
* hw/pcmcia/pxa2xx.c
- pxa2xx bypasses set_link and therefore does not use refcounts
* hw/s390x/s390-virtio-bus.c
* hw/virtio/virtio-pci.c
* hw/virtio/virtio-rng.c
* ui/console.c
- set_link is used and there is no explicit unref, do unref
Cc: Peter Crosthwaite <peter.crosthwaite@petalogix.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Integrate (un)realization of child buses with realization/unrealization
of the device hosting them. Code in device_unparent() is reordered for
unrealization of buses to work as part of device unrealization.
That way no changes need to be made to bus instantiation.
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Add a "realized" property calling realize/unrealize hooks as for devices.
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move setting DeviceClass::hotpluggable default from device's
class_base_init() to device's class_init().
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Commit 1a37eca107 (qdev: add
"hotpluggable" property to Device) added a property "hotpluggable" to
each device, with its getter accessing parent_bus->allow_hotplug.
Add a NULL check.
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
When we have 2 separate qdev devices that both create a qbus of the
same type without specifying a bus name or device name, we end up
with two buses of the same name, such as ide.0 on the Mac machines:
dev: macio-ide, id ""
bus: ide.0
type IDE
dev: macio-ide, id ""
bus: ide.0
type IDE
If we now spawn a device that connects to a ide.0 the last created
bus gets the device, with the first created bus inaccessible to the
command line.
After some discussion on IRC we concluded that the best quick fix way
forward for this is to make automated bus-class type based allocation
count a global counter. That's what this patch implements. With this
we instead get
dev: macio-ide, id ""
bus: ide.1
type IDE
dev: macio-ide, id ""
bus: ide.0
type IDE
on the example mentioned above.
This also means that if you did -device ...,bus=ide.0 you got a device
on the first bus (the last created one) before this patch and get that
device on the second one (the first created one) now. Breaks
migration unless you change bus=ide.0 to bus=ide.1 on the destination.
This is intended and makes the bus enumeration work as expected.
As per review request follows a list of otherwise affected boards and
the reasoning for the conclusion that they are ok:
target machine bus id times
------ ------- ------ -----
aarch64 n800 i2c-bus.0 2
aarch64 n810 i2c-bus.0 2
arm n800 i2c-bus.0 2
arm n810 i2c-bus.0 2
-> Devices are only created explicitly on one of the two buses, using
s->mpu->i2c[0], so no change to the guest.
aarch64 vexpress-a15 virtio-mmio-bus.0 4
aarch64 vexpress-a9 virtio-mmio-bus.0 4
aarch64 virt virtio-mmio-bus.0 32
arm vexpress-a15 virtio-mmio-bus.0 4
arm vexpress-a9 virtio-mmio-bus.0 4
arm virt virtio-mmio-bus.0 32
-> Makes -device bus= work for all virtio-mmio buses. Breaks
migration. Workaround for migration from old to new: specify
virtio-mmio-bus.4 or .32 respectively rather than .0 on the
destination.
aarch64 xilinx-zynq-a9 usb-bus.0 2
arm xilinx-zynq-a9 usb-bus.0 2
mips64el fulong2e usb-bus.0 2
-> Normal USB operation not affected. Migration driver needs command
line to use the other bus.
i386 isapc ide.0 2
x86_64 isapc ide.0 2
mips mips ide.0 2
mips64 mips ide.0 2
mips64el mips ide.0 2
mipsel mips ide.0 2
ppc g3beige ide.0 2
ppc mac99 ide.0 2
ppc prep ide.0 2
ppc64 g3beige ide.0 2
ppc64 mac99 ide.0 2
ppc64 prep ide.0 2
-> Makes -device bus= work for all IDE buses. Breaks migration.
Workaround for migration from old to new: specify ide.1 rather than
ide.0 on the destination.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
* QTest cleanups and test cases for PCI NICs
* NAND fix for "info qtree"
* Cleanup and extension of QOM machine tests
* IndustryPack test cases and conversion to QOM realize
* I2C cleanups
* Cleanups of legacy qdev properties
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=KRcc
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' into staging
QOM infrastructure fixes and device conversions
* QTest cleanups and test cases for PCI NICs
* NAND fix for "info qtree"
* Cleanup and extension of QOM machine tests
* IndustryPack test cases and conversion to QOM realize
* I2C cleanups
* Cleanups of legacy qdev properties
# gpg: Signature made Mon 17 Feb 2014 22:15:37 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
* remotes/afaerber/tags/qom-devices-for-peter: (49 commits)
qtest: Include system headers before user headers
qapi: Refine human printing of sizes
qdev: Use QAPI type names for properties
qdev: Add enum property types to QAPI schema
block: Handle "rechs" and "large" translation options
qdev: Remove hex8/32/64 property types
qdev: Remove most legacy printers
qdev: Use human mode in "info qtree"
qapi: Add human mode to StringOutputVisitor
qdev: Inline qdev_prop_parse()
qdev: Legacy properties are just strings
qdev: Legacy properties are now read-only
qdev: Remove legacy parsers for hex8/32/64
qdev: Sizes are now parsed by StringInputVisitor
qapi: Add size parser to StringInputVisitor
qtest: Don't segfault with invalid -qtest option
ipack: Move IndustryPack out of hw/char/
ipoctal232: QOM parent field cleanup
ipack: QOM parent field cleanup for IPackDevice
ipack: QOM parent field cleanup for IPackBus
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
prop->info->legacy_name is still used by "-device foo,?".
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
make qdev_unplug()/device_set_realized() to call hotplug handler's
plug/unplug methods if available and remove not needed anymore
hot(un)plug handling from PCIDevice.
In case if hotplug handler is not available, revert to the legacy
hotplug method for compatibility with not yet converted buses.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently it's possible to make PCIDevice not hotpluggable
by using no_hotplug field of PCIDeviceClass. However it
limits this only to PCI devices and prevents from
generalizing hotplug code.
So add similar field to DeviceClass so it could be reused
with other Devices and would allow to replace PCI specific
hotplug callbacks with generic implementation. Following
patches will replace PCIDeviceClass.no_hotplug with this
new property.
In addition expose field as "hotpluggable" readonly property,
to make it possible to read its value via QOM interface.
Make DeviceClass hotpluggable by default as it was assumed
before.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It will allow to reuse field with different BUSes,
reducing code duplication. Field is intended for
replacing 'hotplug_qdev' field in PCIBus and also
will allow to avoid adding equivalent field to
DimmBus with possiblitity to refactor other BUSes
to use it instead of custom field.
In addition once all users of allow_hotplug field
are converted to new API, link could replace
allow_hotplug field in qdev hotplug code.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This includes some Preparatory patches for cpu hotplug for q25 and memory
hotplug by Igor, tests and memory mapping change
by Laszlo and pci reset cleanup by Paolo.
There are also some fixes for fedora and virtio:
included here since they are test blockers for me.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSuF+2AAoJECgfDbjSjVRpTz0IAJhNCC8L2GVt+pm1RAt6lbqZ
u9bCrqfThDORN2mUTEuLu4ZpZC0DYc7d0Jjr5NPesC5G/Afzi5/to6+l7nNZneU3
OdBPglXCCfU/cRaLu7JG2akpha0GVU0tsSCoWIYa6mwlWA4/DXVMgeKg/bh/EgfM
B1w4fE2RgRM9bEqWmX4+tZw8dgk7uVJhu95HCDnb5eikaKlFzwuOlvexrDV3KbPc
bkJe35zbGrKOws93tiSeoqcDx2dcYSzecPoJ0jiCY0KXJ17PBWAvuLTtYqkwwe9J
2FEnTslQJ3Rc8jTFiOPWx2pGaejG4y7Tnk6uuzW6fbbSLOQDPJy3KgmutJFMt1A=
=ShCj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
acpi,pci,pc,fedora,virtio fixes and enhancements
This includes some Preparatory patches for cpu hotplug for q25 and memory
hotplug by Igor, tests and memory mapping change
by Laszlo and pci reset cleanup by Paolo.
There are also some fixes for fedora and virtio:
included here since they are test blockers for me.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 23 Dec 2013 08:07:18 AM PST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
* mst/tags/for_anthony:
target-arm: fix build with gcc 4.8.2
virtio: add back call to virtio_bus_device_unplugged
piix: fix 32bit pci hole
qdev: switch reset to post-order
qdev: allow both pre- and post-order vists in qdev walking functions
pci: clean up resetting of IRQs
pci: do not export pci_bus_reset
ACPI/DSDT-CPU: cleanup bogus comment
ACPI: Q35 DSDT: fix CPU hotplug GPE0.2 handler
acpi: ich9: allow guest to clear SCI rised by GPE
acpi: factor out common pm_update_sci() into acpi core
acpi: piix4: remove not needed GPE0 mask
i440fx-test: verify firmware under 4G and 1M, both -bios and -pflash
i440fx-test: generate temporary firmware blob
i440fx-test: give each GTest case its own qtest
i440fx-test: qtest_start() should be paired with qtest_end()
hw/i386/pc_sysfw: support two flash drives
pc_piix: document gigabyte_align
piix: gigabyte alignment for ram
Message-id: 1387815007-1272-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Replace assert_no_error() usages with the error_abort system.
&error_abort is passed into API calls to signal to the Error sub-system
that any errors are fatal. Removes need for caller assertions.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This is unreachable code, as it's already asserted that no errors have
occurred. Delete.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Same reasoning as commit 02a5c4c974
("qdev: Drop misleading qdev_free() function"). The qbus_free()
function removes the child from the namespace and decrements the
reference count. It does not, however, guarantee to free the child
since the refcount may still be held.
Just call object_unparent() directly.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Post-order is the only sensible direction for the reset signals.
For example, suppose pre-order is used and the parent has some data
structures that cache children state (for example a list of active
requests). When the reset method is invoked on the parent, these caches
could be in any state.
If post-order is used, on the other hand, these will be in a known state
when the reset method is invoked on the parent.
This change means that it is no longer possible to block the visit of
the devices, so the callback is changed to return void. This is not
a problem, because PCI was returning 1 exactly in order to achieve the
same ordering that this patch implements.
PCI can then rely on the qdev core having sent a "reset signal" (whatever
that means) to the device, and only do the PCI-specific initialization
with pci_do_device_reset.
MST: fixed up virtio-ccw
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Resetting should be done in post-order, not pre-order. However,
qdev_walk_children and qbus_walk_children do not allow this. Fix
it by adding two extra arguments to the functions.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The qdev_free() function name is misleading since all the function does
is unlink the device from its parent. The device is not necessarily
freed.
The device will be freed when its QObject refcount reaches zero. It is
usual for the parent (bus) to hold the final reference but there are
cases where something else holds a reference so "free" is a misleading
name.
Call object_unparent(obj) directly instead of having a qdev wrapper
function.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
To be passed on to object_initialize_with_type().
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> (virtio-ccw)
Signed-off-by: Andreas Färber <afaerber@suse.de>
To be passed to object_initialize().
Since commit 39355c3826 the argument is
void*, so drop some superfluous (BusState *) casts or direct parent
field usages.
Signed-off-by: Andreas Färber <afaerber@suse.de>
This way, properties registered in the instance_init function of
child classes will be handled properly by qdev_prop_set_globals(), too.
Includes a unit test for the new functionality.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Recent virtio refactoring in QEMU made virtio-bus become the parent bus
of scsi-bus, and virtio-bus doesn't have get_fw_dev_path implementation,
typename will be added to fw_dev_path by default, the new fw_dev_path
could not be identified by seabios. It causes that bootindex parameter
of scsi device doesn't work.
This patch implements get_fw_dev_path() in BusClass, it will be called
if bus doesn't implement the method, tyename will be added to
fw_dev_path. If the implemented method returns NULL, nothing will be
added to fw_dev_path.
It also implements virtio_bus_get_fw_dev_path() to return NULL. Then
QEMU will still pass original style of fw_dev_path to seabios.
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1369814202-10346-1-git-send-email-akong@redhat.com
--
v2: only add nothing to fw_dev_path when get_fw_dev_path() is
implemented and returns NULL. then it will not effect other devices
don't have get_fw_dev_path() implementation.
v3: implement default get_fw_dev_path() in BusClass
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Since commit 2f7bd829db "qdev: Fix device_add bus assumptions"
it's possible to device_add bus-less device, but if such device is
unplugged it will dereference NULL parent_bus in qdev_unplug().
Fix it by taking in account that parent_bus might be NULL and
skipping bus check.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 1367587536-14964-1-git-send-email-imammedo@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Better than just releasing the error object silently.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 517E68FC.6030400@siemens.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Currently device_set_realized() sets parent only after device was realized,
but qdev_device_add() sets it before device is realized.
Make behavior consistent and alter device_set_realized() to behave like
qdev_device_add().
It will allow to set link<> properties in realize() method in classes
inherited from DEVICE.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Since commit 249d41720b (qdev: Prepare
"realized" property) setting realized = true would register the device's
VMStateDescription, but realized = false would not unregister it. Fix that.
Moving the code from unparenting also revealed that we were calling
DeviceClass::init through DeviceClass::realize as interim solution but
DeviceClass::exit still at unparenting time with a realized check.
Make this symmetrical by implementing DeviceClass::unrealize to call it,
while we're setting realized = false in the unparenting path.
The only other unrealize user is mac_nvram, which can safely override it.
Thus, mark DeviceClass::exit as obsolete, new devices should implement
DeviceClass::unrealize instead.
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1366043650-9719-1-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>