Compute the correct size for test_bits().
qemu_get_ram_ptr() and qemu_safe_ram_ptr() will call xen_map_cache()
with size is 0 if the requested address is in the RAM. Then
xen_map_cache() will pass the size 0 to test_bits() for checking if the
corresponding pfn was mapped in cache. But test_bits() will always
return 1 when size is 0 without any bit testing. Actually, for this
case, test_bits should check one bit. So this patch introduced a
__test_bit_size which is greater than 0 and a multiple of XC_PAGE_SIZE,
then test_bits can work correctly with __test_bit_size
>> XC_PAGE_SHIFT as its size.
Signed-off-by: Zhenguo Wang <wangzhenguo@huawei.com>
Signed-off-by: Weidong Han <hanweidong@huawei.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Replace last_address_index and last_address_vaddr with a single pointer
to the last MapCacheEntry used.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are
reserved) and its purpose doesn't match the name (most target_phys_addr_t
addresses are not target specific). Replace it with a finger-friendly,
standards conformant hwaddr.
Outstanding patchsets can be fixed up with the command
git rebase -i --exec 'find -name "*.[ch]"
| xargs s/target_phys_addr_t/hwaddr/g' origin
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When memory is mapped in qemu_map_cache with lock != 0 a reverse mapping
is created pointing to the virtual address of location requested.
The cached mapped entry is saved in last_address_vaddr with the memory
location of the base virtual address (without bucket offset).
However when this entry is invalidated the virtual address saved in the
reverse mapping is used. This cause that the mapping is freed but the
last_address_vaddr is not reset.
Signed-off-by: Frediano Ziglio <frediano.ziglio@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
When an IOREQ_TYPE_INVALIDATE is sent to QEMU, it invalidates all entry
of the map cache even if it's locked.
QEMU is not able to know that entry was invalidated, so when an IO
access is requested a segfault occured.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Because the size of a mapping is wrong when there is an offset and a
size >= bucket_size.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This patch changes the xen_map_cache behavior. Before trying to map a guest
addr, mapcache will look into the list of range of address that have been moved
(physmap/set_memory). There is currently one memory space like this, the vram,
"moved" from were it's allocated to were the guest will look into.
This help to have a succefull migration.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
All files under GPLv2 will get GPLv2+ changes starting tomorrow.
event_notifier.c and exec-obsolete.h were only ever touched by Red Hat
employees and can be relicensed now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Many places in QEMU call qemu_aio_flush() to complete all pending
asynchronous I/O. Most of these places actually want to drain all block
requests but there is no block layer API to do so.
This patch introduces the bdrv_drain_all() API to wait for requests
across all BlockDriverStates to complete. As a bonus we perform checks
after qemu_aio_wait() to ensure that requests really have finished.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Previously, the address space soft limit was set mcache_max_size. So,
before the mcache_max_size was reached by the mapcache, QEMU was killed
for overuse of the virtual address space.
This patch fix that by setting the soft limit the maximum than can have
QEMU. So the soft and hard limit are always set to RLIM_INFINITY if QEMU
is privileged.
In case QEMU is not run as root and the limit is too low, the maximum
mapcache size will be set the rlim_max - 80MB because observed that QEMU
use 75MB more than the maximum mapcache size after several empirical
tests.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This patch fixes a compilation error in xen-mapcache.c .
/home/stefanb/qemu/qemu-git/xen-mapcache.c: In function ‘xen_ram_addr_from_mapcache’:
/home/stefanb/qemu/qemu-git/xen-mapcache.c:240:42: error: variable ‘pentry’ set but not used [-Werror=unused-but-set-variable]
cc1: all warnings being treated as errors
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The map cache is a Xen thing, so its API should make this clear.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Replace xen_map_block with qemu_map_cache with the appropriate locking
and size parameters.
Replace xen_unmap_block with qemu_invalidate_entry.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
There is no need for qemu_map_cache_unlock, just use
qemu_invalidate_entry instead.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Fix the implementation of qemu_map_cache: correctly support size
arguments different from 0 or MCACHE_BUCKET_SIZE.
The new implementation supports locked mapcache entries with size
multiple of MCACHE_BUCKET_SIZE. qemu_invalidate_entry can correctly
find and unmap these "large" mapcache entries given that the virtual
address passed to qemu_invalidate_entry is the same returned by
qemu_map_cache when the locked mapcache entry was created.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This function allows to unlock a ram_ptr give by qemu_get_ram_ptr. After
a call to qemu_put_ram_ptr, the pointer may be unmap from QEMU when
used with Xen.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Adds a cap to the number of map cache entries. This prevents the map
cache from overwhelming system memory.
I also removed the bitmap macros and #included bitmap.h instead.
Signed-off-By: John Baboval <john.baboval@virtualcomputer.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
On IA32 host or IA32 PAE host, at present, generally, we can't create
an HVM guest with more than 2G memory, because generally it's almost
impossible for Qemu to find a large enough and consecutive virtual
address space to map an HVM guest's whole physical address space.
The attached patch fixes this issue using dynamic mapping based on
little blocks of memory.
Each call to qemu_get_ram_ptr makes a call to qemu_map_cache with the
lock option, so mapcache will not unmap these ram_ptr.
Blocks that do not belong to the RAM, but usually to a device ROM or to
a framebuffer, are handled in a separate function. So the whole RAMBlock
can be map.
Signed-off-by: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
