Processes incoming requests on the vhost-user fd.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Listen on our unix socket for the connection from QEMU, when we get it
initialise vhost-user and dive into our own loop variant (currently
dummy).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When run with vhost-user options we conect to the QEMU instead
via a socket. Start this off by creating the socket.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The -o source=PATH option will be used by most command-line invocations.
Let's document it!
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add options to specify parameters for virtio-fs paths, i.e.
./virtiofsd -o vhost_user_socket=/tmp/vhostqemu
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
If caller has not sent file handle in request, then using inode, retrieve
the fd opened using O_PATH and use that to open file again and issue
fsync. This will be needed when dax_flush() calls fsync. At that time
we only have inode information (and not file).
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
1) Use correct CONFIG_FALLOCATE macro to check if fallocate() is supported.(i.e configure
script sets CONFIG_FALLOCATE intead of HAVE_FALLOCATE if fallocate() is supported)
2) Replace HAVE_POSIX_FALLOCATE with CONFIG_POSIX_FALLOCATE.
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Merged from two of Xiao Yang's patches
virtiofsd only supports major=7, minor>=31; trim out a lot of
old compatibility code.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
All of the fuse files include config.h and define GNU_SOURCE
where we don't have either under our build - remove them.
Fixup path to the kernel's fuse.h in the QEMUs world.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
QEMU's compiler enables warnings/errors for ignored values
and the (void) trick used in the fuse code isn't enough.
Turn all the return values into a return value on the function.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Notify reply support is unused by virtiofsd. The code would need to be
updated to validate input buffer sizes. Remove this unused code since
changes to it are untestable.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Classic FUSE file system daemons take a mountpoint argument but
virtiofsd exposes a vhost-user UNIX domain socket instead. The
mountpoint argument is not used by virtiofsd but the user is still
required to pass a dummy argument on the command-line.
Remove the mountpoint argument to clean up the command-line.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
There's a lot of the original fuse code we don't need; trim them down.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
with additional trimming by:
Signed-off-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
passthrough_ll is one of the examples in the upstream fuse project
and is the main part of our daemon here. It passes through requests
from fuse to the underlying filesystem, using syscalls as directly
as possible.
From libfuse fuse-3.8.0
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixed up 'GPL' to 'GPLv2' as per Dan's comments and consistent
with the 'LICENSE' file in libfuse; patch sent to libfuse to fix
it upstream.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
fuse_lowlevel is one of the largest files from the library
and does most of the work. Add it separately to keep the diff
sizes small.
Again this is from upstream fuse-3.8.0
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add most of the non-main .c files we need from upstream fuse-3.8.0
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Update scripts/update-linux-headers.sh to add fuse.h and
use it to pull in fuse.h from the kernel; from v5.5-rc1
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Pull in headers fromlibfuse's upstream fuse-3.8.0
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The Exynos4210 serial driver uses an interrupt line to signal if receive
data is available. Connect that interrupt with the DMA controller's
'peripheral busy' gpio pin to stop the DMA if there is no more receive
data available. Without this patch, receive DMA runs wild and fills the
entire receive DMA buffer with invalid data.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20200123052540.6132-9-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To support receive DMA, we need to inform the DMA controller if receive data
is available. Otherwise the DMA controller keeps requesting data, causing
receive errors.
Implement this using an interrupt line. The instantiating code then needs
to connect the interrupt with the matching DMA controller GPIO pin.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20200123052540.6132-8-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The driver already implements a receive FIFO, but it does not
handle receive FIFO trigger levels and timeout. Implement the
missing functionality.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20200123052540.6132-7-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
After restoring a VM, serial parameters need to be updated to reflect
restored register values. Implement a post_load function to handle this
situation.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20200123052540.6132-6-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace debug code with tracing to aid debugging.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20200123052540.6132-5-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
First parameter to exynos4210_get_irq() is not the SPI port number,
but the interrupt group number. Interrupt groups are 20 for mdma
and 21 for pdma. Interrupts are not inverted. Controllers support 32
events (pdma) or 31 events (mdma). Events must all be routed to a single
interrupt line. Set other parameters as documented in Exynos4210 datasheet,
section 8 (DMA controller).
Fixes: 59520dc65e ("hw/arm/exynos4210: Add DMA support for the Exynos4210")
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20200123052540.6132-4-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Exynos DMA requires up to 33 interrupt lines (32 event interrupts
plus abort interrupt), which all need to be wired together. Increase
the maximum number of or-irq lines to 48 to support this configuration.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20200123052540.6132-3-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Missed in 870c034da0, hopefully reported by Coverity.
Fixes: Coverity CID 1412793 (Incorrect expression)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200121213853.9601-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When dumping a guest with dump-guest-memory also dump the SVE
registers if they are in use.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200120101832.18781-1-drjones@redhat.com
[PMM: fixed checkpatch nits]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The qemu-block-drivers documentation is currently in
docs/qemu-block-drivers.texi in Texinfo format, which we present
to the user as:
* a qemu-block-drivers manpage
* a section of the main qemu-doc HTML documentation
Convert the documentation to rST format, and present it to
the user as:
* a qemu-block-drivers manpage
* part of the system/ Sphinx manual
This follows the same pattern we've done for qemu-ga and qemu-nbd.
We have to drop a cross-reference from the documentation of the
-cdrom option back to the qemu-block-drivers documentation, since
they're no longer within the same texinfo document.
As noted in a comment, the manpage output is slightly compromised
due to limitations in Sphinx. In an ideal world, the HTML output
would have the various headings like 'Disk image file formats'
as top-level section headings (which then appear in the overall
system manual's table-of-contents), and it would not have the
section headings which make sense only for the manpage like
'synopsis', 'description', and 'see also'. Unfortunately, the
mechanism Sphinx provides for restricting pieces of documentation
is limited to the point of being flawed: the 'only::' directive
is implemented as a filter that is applied at a very late stage
in the document processing pipeline, rather than as an early
equivalent of an #ifdef. This means that Sphinx's process of
identifying which section heading markup styles are which levels
of heading gets confused if the 'only::' directive contains
section headings which would affect the heading-level of a
later heading. I have opted to prioritise making the HTML format
look better, with the compromise being that in the manpage
the 'Disk image file formats' &c headings are top-level headings
rather than being sub-headings under the traditional 'Description'
top-level section title.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200116141511.16849-4-peter.maydell@linaro.org
We want a user-facing manual which contains system emulation
documentation. Create an empty one which we can populate.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200116141511.16849-3-peter.maydell@linaro.org
The qemu-nbd documentation is currently in qemu-nbd.texi in Texinfo
format, which we present to the user as:
* a qemu-nbd manpage
* a section of the main qemu-doc HTML documentation
Convert the documentation to rST format, and present it to the user as:
* a qemu-nbd manpage
* part of the interop/ Sphinx manual
This follows the same pattern as commit 27a296fce9 did for the
qemu-ga manpage.
All the content of the old manpage is retained, except that I have
dropped the "This is free software; see the source for copying
conditions. There is NO warranty..." text that was in the old AUTHOR
section; Sphinx's manpage builder doesn't expect that much text in
the AUTHOR section, and since none of our other manpages have it it
seems easiest to delete it rather than try to figure out where else
in the manpage to put it.
The only other textual change is that I have had to give the
--nocache option its own description ("Equivalent to --cache=none")
because Sphinx doesn't have an equivalent of using item/itemx
to share a description between two options.
Some minor aspects of the formatting have changed, to suit what is
easiest for Sphinx to output. (The most notable is that Sphinx
option section option syntax doesn't support '--option foo=bar'
with bar underlined rather than bold, so we have to switch to
'--option foo=BAR' instead.)
The contents of qemu-option-trace.texi are now duplicated in
docs/interop/qemu-option-trace.rst.inc, until such time as we complete
the conversion of the other files which use it; since it has had only
3 changes in 3 years, this shouldn't be too awkward a burden.
(We use .rst.inc because if this file fragment has a .rst extension
then Sphinx complains about not seeing it in a toctree.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200116141511.16849-2-peter.maydell@linaro.org
We can use existing helper function to trigger hotplug handler
plug, which makes code clearer.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Message-id: 20200120012755.44581-3-zhukeqian1@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is extra indent in ACPI GED hotplug cb that should be
deleted.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Message-id: 20200120012755.44581-2-zhukeqian1@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Perform the set of operations and test described in LP 1859713.
Suggested-by: Adrien GRASSEIN <adrien.grassein@smile.fr>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200116230809.19078-5-richard.henderson@linaro.org
[PMM: fixed hard-coded tabs]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the test vector from the QARMA paper, run through PACGA.
Suggested-by: Vincent Dehors <vincent.dehors@smile.fr>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200116230809.19078-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We were incorrectly requiring ARMv8.4 support for the pauth
tests, but Pointer Authentication is an ARMv8.3 extension.
Further, hiding the required architecture within asm() is
not correct.
Correct the architecture version requested, and specify it
in the cflags of the (cross-) compiler rather than in the asm.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200116230809.19078-3-richard.henderson@linaro.org
[PMM: tweaked commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the PAC computation, sbox was applied over wrong bits.
As this is a 4-bit sbox, bit index should be incremented by 4 instead of 16.
Test vector from QARMA paper (https://eprint.iacr.org/2016/444.pdf) was
used to verify one computation of the pauth_computepac() function which
uses sbox2.
Launchpad: https://bugs.launchpad.net/bugs/1859713
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Vincent DEHORS <vincent.dehors@smile.fr>
Signed-off-by: Adrien GRASSEIN <adrien.grassein@smile.fr>
Message-id: 20200116230809.19078-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The PMU is not optional on cortex-r5 and cortex-r5f (see
the "Features" chapter of the Technical Reference Manual).
Signed-off-by: Clement Deschamps <clement.deschamps@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200114105918.2366370-1-clement.deschamps@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add FS/FD/RTC/KCOV ioctls
-----BEGIN PGP SIGNATURE-----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=2qso
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-5.0-pull-request' into staging
Fix mmap guest space and brk
Add FS/FD/RTC/KCOV ioctls
# gpg: Signature made Thu 23 Jan 2020 08:21:41 GMT
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/linux-user-for-5.0-pull-request:
linux-user: Add support for read/clear RTC voltage low detector using ioctls
linux-user: Add support for getting/setting RTC PLL correction using ioctls
linux-user: Add support for getting/setting RTC wakeup alarm using ioctls
linux-user: Add support for getting/setting RTC periodic interrupt and epoch using ioctls
linux-user: Add support for getting/setting RTC time and alarm using ioctls
linux-user: Add support for enabling/disabling RTC features using ioctls
linux-user: Add support for TYPE_LONG and TYPE_ULONG in do_ioctl()
linux-user: Add support for KCOV_INIT_TRACE ioctl
linux-user: Add support for KCOV_<ENABLE|DISABLE> ioctls
configure: Detect kcov support and introduce CONFIG_KCOV
linux-user: Add support for FDFMT<BEG|TRK|END> ioctls
linux-user: Add support for FD<SETEMSGTRESH|SETMAXERRS|GETMAXERRS> ioctls
linux-user: Add support for FS_IOC32_<GET|SET>VERSION ioctls
linux-user: Add support for FS_IOC32_<GET|SET>FLAGS ioctls
linux-user: Add support for FS_IOC_<GET|SET>VERSION ioctls
linux-user: Reserve space for brk
linux-user:Fix align mistake when mmap guest space
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop a trailing whitespace. Make line shorter.
Fixes: 7652511473 ("vhost: Only align sections for vhost-user")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch implements functionalities of following ioctls:
RTC_VL_READ - Read voltage low detection information
Read the voltage low for RTCs that support voltage low.
The third ioctl's' argument points to an int in which
the voltage low is returned.
RTC_VL_CLR - Clear voltage low information
Clear the information about voltage low for RTCs that
support voltage low. The third ioctl(2) argument is
ignored.
Implementation notes:
Since one ioctl has a pointer to 'int' as its third agrument,
and another ioctl has NULL as its third argument, their
implementation was straightforward.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Filip Bozuta <Filip.Bozuta@rt-rk.com>
Message-Id: <1579117007-7565-7-git-send-email-Filip.Bozuta@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch implements functionalities of following ioctls:
RTC_PLL_GET - Getting PLL correction
Read the PLL correction for RTCs that support PLL. The PLL correction
is returned in the following structure:
struct rtc_pll_info {
int pll_ctrl; /* placeholder for fancier control */
int pll_value; /* get/set correction value */
int pll_max; /* max +ve (faster) adjustment value */
int pll_min; /* max -ve (slower) adjustment value */
int pll_posmult; /* factor for +ve correction */
int pll_negmult; /* factor for -ve correction */
long pll_clock; /* base PLL frequency */
};
A pointer to this structure should be passed as the third
ioctl's argument.
RTC_PLL_SET - Setting PLL correction
Sets the PLL correction for RTCs that support PLL. The PLL correction
that is set is specified by the rtc_pll_info structure pointed to by
the third ioctl's' argument.
Implementation notes:
All ioctls in this patch have a pointer to a structure rtc_pll_info
as their third argument. All elements of this structure are of
type 'int', except the last one that is of type 'long'. That is
the reason why a separate target structure (target_rtc_pll_info)
is defined in linux-user/syscall_defs. The rest of the
implementation is straightforward.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Filip Bozuta <Filip.Bozuta@rt-rk.com>
Message-Id: <1579117007-7565-6-git-send-email-Filip.Bozuta@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch implements functionalities of following ioctls:
RTC_WKALM_SET, RTC_WKALM_GET - Getting/Setting wakeup alarm
Some RTCs support a more powerful alarm interface, using these
ioctls to read or write the RTC's alarm time (respectively)
with this structure:
struct rtc_wkalrm {
unsigned char enabled;
unsigned char pending;
struct rtc_time time;
};
The enabled flag is used to enable or disable the alarm
interrupt, or to read its current status; when using these
calls, RTC_AIE_ON and RTC_AIE_OFF are not used. The pending
flag is used by RTC_WKALM_RD to report a pending interrupt
(so it's mostly useless on Linux, except when talking to the
RTC managed by EFI firmware). The time field is as used with
RTC_ALM_READ and RTC_ALM_SET except that the tm_mday, tm_mon,
and tm_year fields are also valid. A pointer to this structure
should be passed as the third ioctl's argument.
Implementation notes:
All ioctls in this patch have a pointer to a structure
rtc_wkalrm as their third argument. That is the reason why
corresponding definition is added in linux-user/syscall_types.h.
Since all elements of this structure are either of type
'unsigned char' or 'struct rtc_time' (that was covered in one
of previous patches), the rest of the implementation is
straightforward.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Filip Bozuta <Filip.Bozuta@rt-rk.com>
Message-Id: <1579117007-7565-5-git-send-email-Filip.Bozuta@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch implements functionalities of following ioctls:
RTC_IRQP_READ, RTC_IRQP_SET - Getting/Setting IRQ rate
Read and set the frequency for periodic interrupts, for RTCs
that support periodic interrupts. The periodic interrupt must
be separately enabled or disabled using the RTC_PIE_ON,
RTC_PIE_OFF requests. The third ioctl's argument is an
unsigned long * or an unsigned long, respectively. The value
is the frequency in interrupts per second. The set of allow‐
able frequencies is the multiples of two in the range 2 to
8192. Only a privileged process (i.e., one having the
CAP_SYS_RESOURCE capability) can set frequencies above the
value specified in /proc/sys/dev/rtc/max-user-freq. (This
file contains the value 64 by default.)
RTC_EPOCH_READ, RTC_EPOCH_SET - Getting/Setting epoch
Many RTCs encode the year in an 8-bit register which is either
interpreted as an 8-bit binary number or as a BCD number. In
both cases, the number is interpreted relative to this RTC's
Epoch. The RTC's Epoch is initialized to 1900 on most systems
but on Alpha and MIPS it might also be initialized to 1952,
1980, or 2000, depending on the value of an RTC register for
the year. With some RTCs, these operations can be used to
read or to set the RTC's Epoch, respectively. The third
ioctl's argument is an unsigned long * or an unsigned long,
respectively, and the value returned (or assigned) is the
Epoch. To set the RTC's Epoch the process must be privileged
(i.e., have the CAP_SYS_TIME capability).
Implementation notes:
All ioctls in this patch have a pointer to 'ulong' as their
third argument. That is the reason why corresponding parts
of added code in linux-user/syscall_defs.h contain special
handling related to 'ulong' type: they use 'abi_ulong' type
to make sure that ioctl's code is calculated correctly for
both 32-bit and 64-bit targets. Also, 'MK_PTR(TYPE_ULONG)'
is used for the similar reason in linux-user/ioctls.h.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Filip Bozuta <Filip.Bozuta@rt-rk.com>
Message-Id: <1579117007-7565-4-git-send-email-Filip.Bozuta@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch implements functionalities of following ioctls:
RTC_RD_TIME - Getting RTC time
Returns this RTC's time in the following structure:
struct rtc_time {
int tm_sec;
int tm_min;
int tm_hour;
int tm_mday;
int tm_mon;
int tm_year;
int tm_wday; /* unused */
int tm_yday; /* unused */
int tm_isdst; /* unused */
};
The fields in this structure have the same meaning and ranges
as the tm structure described in gmtime man page. A pointer
to this structure should be passed as the third ioctl's argument.
RTC_SET_TIME - Setting RTC time
Sets this RTC's time to the time specified by the rtc_time
structure pointed to by the third ioctl's argument. To set
the RTC's time the process must be privileged (i.e., have the
CAP_SYS_TIME capability).
RTC_ALM_READ, RTC_ALM_SET - Getting/Setting alarm time
Read and set the alarm time, for RTCs that support alarms.
The alarm interrupt must be separately enabled or disabled
using the RTC_AIE_ON, RTC_AIE_OFF requests. The third
ioctl's argument is a pointer to a rtc_time structure. Only
the tm_sec, tm_min, and tm_hour fields of this structure are
used.
Implementation notes:
All ioctls in this patch have pointer to a structure rtc_time
as their third argument. That is the reason why corresponding
definition is added in linux-user/syscall_types.h. Since all
elements of this structure are of type 'int', the rest of the
implementation is straightforward.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Filip Bozuta <Filip.Bozuta@rt-rk.com>
Message-Id: <1579117007-7565-3-git-send-email-Filip.Bozuta@rt-rk.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
