To test ACPI tables, edk2 needs to be booted with a disk image having
EFI partition. This image is created using UefiTestToolsPkg.
The image is generated using tests/uefi-test-tools source.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Message-Id: <20240625150839.1358279-5-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
edk2-funcs.sh which is used in this Makefile, was removed in the commit
c28a2891f3 ("edk2: update build script"). It is replaced with a python
based script. So, update the Makefile and add the configuration file as
required to support the python based build script.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-4-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Enable building the test application for RISC-V with appropriate
dependencies updated.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240625150839.1358279-3-sunilvl@ventanamicro.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
with some rewording in
tests/qemu-iotests/298
tests/qtest/fuzz/generic_fuzz.c
tests/unit/test-throttle.c
as suggested by Eric.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Since we are now always doing out-of-tree builds, these gitignore
files should not be necessary anymore.
Message-Id: <20200919133637.72744-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In edk2 commit 06033f5abad3 ("BaseTools: Make brotli a submodule",
2020-04-16), part of edk2-stable202005, the Brotli compressor /
decompressor source code that edk2 had flattened into BaseTools was
replaced with a git submodule.
This means we have to initialize edk2's own submodules before building
BaseTools not just in "roms/Makefile.edk2", but in "roms/Makefile" (for
the sake of the "efirom" target) and "tests/uefi-test-tools/Makefile" as
well.
Right now this patch is effectively a no-op; it will become meaningful
after we move the edk2 submodule to edk2-stable202008.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugs.launchpad.net/qemu/+bug/1852196
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200908072939.30178-3-lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
It turns out that forcing python2 for running the edk2 "build" utility is
neither necessary nor sufficient.
Forcing python2 is not sufficient for two reasons:
- QEMU is moving away from python2, with python2 nearing EOL,
- according to my most recent testing, the lacking dependency information
in the makefiles that are generated by edk2's "build" utility can cause
parallel build failures even when "build" is executed by python2.
And forcing python2 is not necessary because we can still return to the
original idea of filtering out jobserver-related options from MAKEFLAGS.
So do that.
While at it, cut short edk2's auto-detection of the python3.* minor
version, by setting PYTHON_COMMAND to "python3" (which we expect to be
available wherever we intend to build edk2).
With this patch, the guest UEFI binaries that are used as part of the BIOS
tables test, and the OVMF and ArmVirtQemu platform firmwares, will be
built strictly in a single job, regardless of an outermost "-jN" make
option. Alas, there appears to be no reliable way to build edk2 in an
(outer make, inner make) environment, with a jobserver enabled.
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Reported-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190920083808.21399-3-lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Unify the recipe for "build-edk2-tools" in
"tests/uefi-test-tools/Makefile" with the recipe for "edk2-basetools" in
"roms/Makefile".
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190920083808.21399-2-lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Commit 58ea30f514 "Clean up header guards that don't match their file
name" messed up contrib/elf2dmp/qemu_elf.h and
tests/migration/migration-test.h.
It missed target/cris/opcode-cris.h and
tests/uefi-test-tools/UefiTestToolsPkg/Include/Guid/BiosTablesTest.h
due to the scripts/clean-header-guards.pl bug fixed in the previous
commit.
Commit a8b991b52d "Clean up ill-advised or unusual header guards"
missed include/hw/xen/io/ring.h for the same reason.
Commit 3979fca4b6 "disas: Rename include/disas/bfd.h back to
include/disas/dis-asm.h" neglected to update the guard symbol for the
rename.
Commit a331c6d774 "semihosting: implement a semihosting console"
created include/hw/semihosting/console.h with an ill-advised guard
symbol.
Clean them up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190604181618.19980-4-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
On UEFI systems, the SMBIOS entry point (a.k.a. anchor) structures are
found similarly to the ACPI RSD PTR table(s): by scanning the
ConfigurationTable array in the EFI system table for well-known GUIDs.
Locate the SMBIOS 2.1 (32-bit) and 3.0 (64-bit) anchors in the
BiosTablesTest UEFI application, and report the addresses in new fields
appended to the BIOS_TABLES_TEST structure.
Cc: "Philippe Mathieu-Daud" <philmd@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Launchpad: https://bugs.launchpad.net/qemu/+bug/1821884
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daud <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Philippe Mathieu-Daud <philmd@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
The edk2-stabe201903 release introduced Python3 support to edk2's
BaseTools; however the Python3 enablement breaks in a corner case (which
is nevertheless supported by the edk2 community), namely the in-module
parallelization that we utilize.
This is tracked under
<https://bugzilla.tianocore.org/show_bug.cgi?id=1607>. For now, work
around the issue (in advance) by forcing Python2. (The workaround is a
no-op before we move to edk2-stabe201903 in the roms/edk2 submodule.)
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daud <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daud <philmd@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Extract the dense logic for architecture and toolchain massaging from
"tests/uefi-test-tools/build.sh", to a set of small functions. We'll reuse
these functions for building full platform firmware images.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daud <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daud <philmd@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Introduce the following build scripts under "tests/uefi-test-tools":
* "build.sh" builds a single module (a UEFI application) from
UefiTestToolsPkg, for a single QEMU emulation target.
"build.sh" relies on cross-compilers when the emulation target and the
build host architecture don't match. The cross-compiler prefix is
computed according to a fixed, Linux-specific pattern. No attempt is
made to copy or reimplement the GNU Make magic from "qemu/roms/Makefile"
for cross-compiler prefix determination. The reason is that the build
host OSes that are officially supported by edk2, and those that are
supported by QEMU, intersect only in Linux. (Note that the UNIXGCC
toolchain is being removed from edk2,
<https://bugzilla.tianocore.org/show_bug.cgi?id=1377>.)
* "Makefile" currently builds the "UefiTestToolsPkg/BiosTablesTest"
application, for arm, aarch64, i386, and x86_64, with the help of
"build.sh".
"Makefile" turns each resultant UEFI executable into a UEFI-bootable,
qcow2-compressed ISO image. The ISO images are output as
"tests/data/uefi-boot-images/bios-tables-test.<TARGET>.iso.qcow2".
Each ISO image should be passed to QEMU as follows:
-drive id=boot-cd,if=none,readonly,format=qcow2,file=$ISO \
-device virtio-scsi-pci,id=scsi0 \
-device scsi-cd,drive=boot-cd,bus=scsi0.0,bootindex=0 \
"Makefile" assumes that "mkdosfs", "mtools", and "genisoimage" are
present.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Shannon Zhao <shannon.zhaosl@gmail.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190204160325.4914-5-lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The "bios-tables-test" program in QEMU's test suite locates the RSD PTR
ACPI table in guest RAM, and (chasing pointers to other ACPI tables)
performs various sanity checks on the QEMU-generated and
firmware-installed tables.
Currently this set of test cases doesn't work with UEFI guests. The ACPI
spec defines distinct methods for OSPM to locate the RSD PTR on
traditional BIOS vs. UEFI platforms, and the UEFI method is more difficult
to implement from the hypervisor side with just raw guest memory access.
Add a UEFI application (to be booted in the UEFI guest) that populates a
small, MB-aligned structure in guest RAM. The structure begins with a
signature GUID. The hypervisor should loop over all MB-aligned pages in
guest RAM until one matches the signature GUID at offset 0, at which point
the hypervisor can fetch the RSDP address field(s) from the structure.
QEMU's test logic currently spins on a pre-determined guest address, until
that address assumes a magic value. The method described in this patch is
conceptually the same ("busy loop until match is found"), except there is
no hard-coded address. This plays a lot more nicely with UEFI guest
firmware (we'll be able to use the normal page allocation UEFI service).
Given the size of EFI_GUID (16 bytes -- 128 bits), mismatches should be
astronomically unlikely. In addition, given the typical guest RAM size for
such tests (128 MB), there are 128 locations to check in one iteration of
the "outer" loop, which shouldn't introduce an intolerable delay after the
guest stores the RSDP address(es), and then the GUID.
The GUID that the hypervisor should search for is
AB87A6B1-2034-BDA0-71BD-375007757785
Expressed as a byte array:
{
0xb1, 0xa6, 0x87, 0xab,
0x34, 0x20,
0xa0, 0xbd,
0x71, 0xbd, 0x37, 0x50, 0x07, 0x75, 0x77, 0x85
}
Note that in the patch, we define "gBiosTablesTestGuid" with all bits
inverted. This is a simple method to prevent the UEFI binary, which
incorporates "gBiosTablesTestGuid", from matching the actual GUID in guest
RAM.
The UEFI application is written against the edk2 framework, which was
introduced earlier as a git submodule. The next patch will provide build
scripts for maintainers.
The source code follows the edk2 coding style, and is licensed under the
2-clause BSDL (in case someone would like to include UefiTestToolsPkg
content in a different edk2 platform).
The "UefiTestToolsPkg.dsc" platform description file resolves the used
edk2 library classes to instances (= library implementations) such that
the UEFI binaries inherit no platform dependencies. They are expected to
run on any system that conforms to the UEFI-2.3.1 spec (which was released
in 2012). The arch-specific build options are carried over from edk2's
ArmVirtPkg and OvmfPkg platforms.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Shannon Zhao <shannon.zhaosl@gmail.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190204160325.4914-4-lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
