Make CONFIG_TCG_INTERPRETER a Meson option, and enable TCI (though with
a warning) if the host CPU is unsupported, making it more similar to
other --enable-* options.
Remove TCG-specific include paths from !CONFIG_TCG builds.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Prior to 2a4b472c3c, sys/signal.h was only included on OpenBSD
(apart from two .c files). The POSIX standard location for this
header is just <signal.h> and in fact, OpenBSD's signal.h includes
sys/signal.h itself.
Unconditionally including <sys/signal.h> on musl causes warnings
for just about every source file:
/usr/include/sys/signal.h:1:2: warning: #warning redirecting incorrect #include <sys/signal.h> to <signal.h> [-Wcpp]
1 | #warning redirecting incorrect #include <sys/signal.h> to <signal.h>
| ^~~~~~~
Since there don't seem to be any platforms which require including
<sys/signal.h> in addition to <signal.h>, and some platforms like
Haiku lack it completely, just remove it.
Tested building on OpenBSD after removing this include.
Signed-off-by: Michael Forney <mforney@mforney.org>
Tested-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210113215600.16100-1-mforney@mforney.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The ADC is part of NPCM7XX Module. Its behavior is controled by the
ADC_CON register. It converts one of the eight analog inputs into a
digital input and stores it in the ADC_DATA register when enabled.
Users can alter input value by using qom-set QMP command.
Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20210108190945.949196-4-wuhaotsh@google.com
[PMM: Added missing hw/adc/trace.h file]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The cocoa UI code currently assumes it is always the active UI
and does not interact well with other UI frontend code. Move
the relevant checks to Meson now that all other frontends
have become Meson options. This way, SDL/GTK+/Cocoa can be
parsed entirely by scripts/configure-parse-buildoptions.pl.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This also allows removing CONFIG_NEED_X11, all the ingredients
can be computed easily in meson.build.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For now move the logic verbatim. GTK+ actually has a hard requirement
on X11 if gtk+x11 is present, but we will sort that out later.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CONFIG_GTK_GL is defined if OpenGL is present and GTK+
is 3.16 or newer. Since GTK+ 3.22 is the minimum supported
version, just use CONFIG_OPENGL instead.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
crypto/tlscreds.h includes GnuTLS headers if CONFIG_GNUTLS is set, but
GNUTLS_CFLAGS, that describe include path, are not propagated
transitively to all users of crypto and build fails if GnuTLS headers
reside in non-standard directory (which is a case for homebrew on Apple
Silicon).
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20210102125213.41279-1-r.bolshakov@yadro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This change moves host OS and arch dependent code for the sysarch
system call related to the -strace functionality into the
appropriate host OS and target arch directories.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Sean Bruno <sburno@FreeBSD.org>
[ imp integrated minor build fixes from sbruno ]
Signed-off-by: Warner Losh <imp@FreeBSD.org>
Message-Id: <20201218205451.10559-4-imp@freebsd.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The tracetool.py script writes to stdout. This means the output filename
is not available to the script. Add the output filename to the
command-line so that the script has access to the filename.
This also simplifies the tracetool.py invocation. It's no longer
necessary to use meson's custom_build(capture : true) to save output.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200827142915.108730-2-stefanha@redhat.com>
Build the array of command line arguments coming from config_host
once for all targets. Add all accelerators to accel/Kconfig so
that the command line arguments for accelerators can be computed
easily in the existing "foreach sym: accelerators" loop.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix linking vhost-user binaries with with ./configure -static, by
overriding glib-2.0 dependency with configure results.
Fixes: 0df750e9d3 ("libvhost-user: make it a meson subproject")
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20201215080319.136228-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds a flag to enable/disable control flow integrity checks
on indirect function calls.
This feature only allows indirect function calls at runtime to functions
with compatible signatures.
This feature is only provided by LLVM/Clang, and depends on link-time
optimization which is currently supported only with LLVM/Clang >= 6.0
We also add an option to enable a debugging version of cfi, with verbose
output in case of a CFI violation.
CFI on indirect function calls does not support calls to functions in
shared libraries (since they were not known at compile time), and such
calls are forbidden. QEMU relies on dlopen/dlsym when using modules,
so we make modules incompatible with CFI.
All the checks are performed in meson.build. configure is only used to
forward the flags to meson
Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Message-Id: <20201204230615.2392-5-dbuono@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch allows to compile QEMU with link-time optimization (LTO).
Compilation with LTO is handled directly by meson. This patch only
adds the option in configure and forwards the request to meson
Tested with all major versions of clang from 6 to 12
Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Message-Id: <20201204230615.2392-2-dbuono@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This check can be done in a much shorter way in meson.build. And while
we're at it, rename the #define to HAVE_BTRFS_H to match the other
HAVE_someheader_H symbols that we already have.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201118171052.308191-7-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This check can be done in a much shorter way in meson.build. And while
we're at it, rename the #define to HAVE_SYS_KCOV_H to match the other
HAVE_someheader_H symbols that we already have.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201118171052.308191-6-thuth@redhat.com>
[lv: s/signal/kcov/]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This check can be done in a much shorter way in meson.build
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201118171052.308191-5-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This check can be done in a much shorter way in meson.build
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201118171052.308191-4-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This check can be done in a much shorter way in meson.build
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201118171052.308191-3-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is a relatively new feature in libfuse (available since 3.8.0,
which was released in November 2019), so we have to add a dedicated
check whether it is available before making use of it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201027190600.192171-7-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The Xilinx ZynqMP CAN controller is developed based on SocketCAN, QEMU CAN bus
implementation. Bus connection and socketCAN connection for each CAN module
can be set through command lines.
Example for using single CAN:
-object can-bus,id=canbus0 \
-machine xlnx-zcu102.canbus0=canbus0 \
-object can-host-socketcan,id=socketcan0,if=vcan0,canbus=canbus0
Example for connecting both CAN to same virtual CAN on host machine:
-object can-bus,id=canbus0 -object can-bus,id=canbus1 \
-machine xlnx-zcu102.canbus0=canbus0 \
-machine xlnx-zcu102.canbus1=canbus1 \
-object can-host-socketcan,id=socketcan0,if=vcan0,canbus=canbus0 \
-object can-host-socketcan,id=socketcan1,if=vcan0,canbus=canbus1
To create virtual CAN on the host machine, please check the QEMU CAN docs:
https://github.com/qemu/qemu/blob/master/docs/can.txt
Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com>
Message-id: 1605728926-352690-2-git-send-email-fnu.vikram@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
By making libvhost-user a subproject, check it builds
standalone (without the global QEMU cflags etc).
Note that the library still relies on QEMU include/qemu/atomic.h and
linux_headers/.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20201125100640.366523-6-marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Pass cpu instead of cpu_family to the NSIS installer script.
That script checks for "x86_64" which is the cpu value,
while cpu_family is "x86".
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20201125191833.964753-1-sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Prefer pkg-config to find_library because some installations of libjpeg
may place it outside the default search path.
Reported-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes regression on curses detection in msys2
by commit#925a40df2828d32d3aaaf022282cba81082fb263
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Message-Id: <20201116213106.589-1-luoyonggang@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Update NetBSD VM to version 9.1
* Misc fixes (e.g. categorize some devices)
-----BEGIN PGP SIGNATURE-----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=A3/B
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-11-17' into staging
* Fixes for compiling on Haiku, and add Haiku VM for compile-testing
* Update NetBSD VM to version 9.1
* Misc fixes (e.g. categorize some devices)
# gpg: Signature made Tue 17 Nov 2020 09:20:31 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2020-11-17:
max111x: put it into the 'misc' category
nand: put it into the 'storage' category
ads7846: put it into the 'input' category
ssd0323: put it into the 'display' category
gitlab-ci: Use $CI_REGISTRY instead of hard-coding registry.gitlab.com
target/microblaze: Fix possible array out of bounds in mmu_write()
tests/vm: update NetBSD to 9.1
tests/vm: Add Haiku test based on their vagrant images
configure: Add a proper check for sys/ioccom.h and use it in tpm_ioctl.h
configure: Do not build pc-bios/optionrom on Haiku
configure: Fix the _BSD_SOURCE define for the Haiku build
qemu/bswap: Remove unused qemu_bswap_len()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On Solaris and Haiku, the _IO() macros are defined in <sys/ioccom.h>.
Add a proper check for this header to our build system, and make sure
to include the header in tpm_ioctl.h to fix a build failure on Solaris
and Haiku.
Message-Id: <20201115152317.42752-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Xen is supported on ARM although weirdly using the i386-softmmu model.
Checking based on the host CPU meant we never enabled Xen support. It
would be nice to enable CONFIG_XEN for aarch64-softmmu to make it not
seem weird but that will require further build surgery.
Fixes: 8a19980e3f ("configure: move accelerator logic to meson")
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu@linaro.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Paul Durrant <paul@xen.org>
Message-Id: <20201110192316.26397-4-alex.bennee@linaro.org>
I interpreted CONFIG_VHOST_USER as controlling only QEMU's vhost-user
device frontends. However, virtiofsd and contrib/ vhost-user device
backends are also controlled by CONFIG_VHOST_USER. Make the
vhost-user-blk server depend on CONFIG_VHOST_USER for consistency.
Now the following error is printed when the vhost-user-blk server is
enabled without CONFIG_VHOST_USER:
$ ./configure --disable-vhost-user --enable-vhost-user-blk ...
../meson.build:761:8: ERROR: Problem encountered: vhost_user_blk_server requires vhost-user support
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201110171121.1265142-3-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The --enable/disable-vhost-user-blk-server options were implemented in
./configure. There has been confusion about them and part of the problem
is that the shell syntax used for setting the default value is not easy
to read. Move the option over to meson where the conditions are easier
to understand:
have_vhost_user_blk_server = (targetos == 'linux')
if get_option('vhost_user_blk_server').enabled()
if targetos != 'linux'
error('vhost_user_blk_server requires linux')
endif
elif get_option('vhost_user_blk_server').disabled() or not have_system
have_vhost_user_blk_server = false
endif
This patch does not change behavior.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201110171121.1265142-2-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
libvhost-user is needed when CONFIG_LINUX is set. The CONFIG_VHOST_USER
check in meson.build is incorrect.
In fact, no explicit check is needed since this dependency is not built
by default. If something declares a dependency on libvhost-user then it
will be built, otherwise it won't be built (i.e. on non-Linux hosts).
This fixes ./configure --disable-vhost-user && make.
Fixes: bc15e44cb2 ("configure: introduce --enable-vhost-user-blk-server")
Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201106210340.698771-1-stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The configuration summary prints a line with "vhost-user: YES/NO",
but the value is currently the vhost-kernel setting instead which
looks wrong. Print the kernel setting in a separate line and switch
the "vhost-user:" line to CONFIG_VHOST_USER instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201109085906.87921-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson 0.56.0 correctly builds non-PIC static libraries with -fPIE if
b_pie=true. We do not have to pass b_staticpic=true if PIE is requested
if Meson is new-enough, which improves performance.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check whether the glibc provides statx() and if so, define CONFIG_STATX.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201102161859.156603-4-mreitz@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently it is unknown whether virtiofsd will be built at
configuration time. It will be automatically built when dependency
is met. Also, required libraries are not clear.
To make this clear, add configure option --{enable,disable}-virtiofsd.
The default is the same as current (enabled if available) like many
other options. When --enable-virtiofsd is given and dependency is not
met, we get:
ERROR: Problem encountered: virtiofsd requires libcap-ng-devel and seccomp-devel
or
ERROR: Problem encountered: virtiofsd needs tools and vhost-user support
In addition, configuration summary now includes virtiofsd entry:
build virtiofs daemon: YES/NO
Signed-off-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Message-Id: <20201008103133.2722903-1-misono.tomohiro@jp.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Manual merge
With upstream commit#8a19980e3fc4, logic was introduced to only
allow WHPX build on x64. But, the logic checks for the cpu family
and not the cpu. On my fedora container build, the cpu family is
x86 and the cpu is x86_64. Fixing the build break by checking for
the cpu, instead of the cpu family.
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Message-Id: <SN4PR2101MB0880D706A85793DDFC411304C01D0@SN4PR2101MB0880.namprd21.prod.outlook.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since installation is not part of Makefiles anymore, Make need not
know the directories anymore. Meson already knows them through
built-in options, do everything using them instead of the config_host
dictionary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Block exports are used by softmmu, qemu-storage-daemon, and qemu-nbd.
They are not used by other programs and are not otherwise needed in
libblock.
Undo the recent move of blockdev-nbd.c from blockdev_ss into block_ss.
Since bdrv_close_all() (libblock) calls blk_exp_close_all()
(libblockdev) a stub function is required..
Make qemu-nbd.c use signal handling utility functions instead of
duplicating the code. This helps because os-posix.c is in libblockdev
and it depends on a qemu_system_killed() symbol that qemu-nbd.c lacks.
Once we use the signal handling utility functions we also end up
providing the necessary symbol.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20200929125516.186715-4-stefanha@redhat.com
[Fixed s/ndb/nbd/ typo in commit description as suggested by Eric Blake
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce libblkdev.fa to avoid recompiling blockdev_ss twice.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200929125516.186715-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Don't compile contrib/libvhost-user/libvhost-user.c again. Instead build
the static library once and then reuse it throughout QEMU.
Also switch from CONFIG_LINUX to CONFIG_VHOST_USER, which is what the
vhost-user tools (vhost-user-gpu, etc) do.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200924151549.913737-14-stefanha@redhat.com
[Added CONFIG_LINUX again because libvhost-user doesn't build on macOS.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Redo the curses test to do the same tests that the configure
check used to do. OpenBSD triggers the warning because
it does not support NCURSES_WIDECHAR and thus the cc.links
test fails.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Message-Id: <20201015220626.418-4-luoyonggang@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Skip the test if it is system emulation is not requested, and
differentiate errors for lack of iconv and lack of curses.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It isn't necessarily the case that use of iconv requires an additional
library. For that reason we shouldn't conditionalize iconv detection on
libiconv.found.
Fixes: 5285e593c3 (configure: Fixes ncursesw detection under msys2/mingw by convert them to meson)
Signed-off-by: Bruce Rogers <brogers@suse.com>
Reviewed-by: Yonggang Luo<l <brogers@suse.com>uoyonggang@gmail.com>
Reviewed-by:Yonggang Luo <luoyonggang@gmail.com>
Message-Id: <20201014221939.196958-1-brogers@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Initially, libudev detection was bundled with --enable-mpath because
qemu-pr-helper was the only user of libudev. Recently however the USB
U2F emulation has also started using libudev, so add a separate
option. This also allows 1) disabling libudev if desired for static
builds and 2) for non-static builds, requiring libudev even if
multipath support is undesirable.
The multipath test is adjusted, because it is now possible to enter it
with configurations that should fail, such as --static --enable-mpath
--disable-libudev.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that the build is done entirely by Meson, there is no need
to keep the Makefile conversion. Instead, we can ask Ninja about
the targets it exposes and forward them.
The main advantages are, from smallest to largest:
- reducing the possible namespace pollution within the Makefile
- removal of a relatively large Python program
- faster build because parsing Makefile.ninja is slower than
parsing build.ninja; and faster build after Meson runs because
we do not have to generate Makefile.ninja.
- tracking of command lines, which provides more accurate rebuilds
In addition the change removes the requirement for GNU make 3.82, which
was annoying on Mac, and avoids bugs on Windows due to ninjatool not
knowing how to convert Windows escapes to POSIX escapes.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Confusingly, QEMU_INCLUDES is not used by configure tests. Moving
it to meson.build ensures that Windows paths are specified instead of
the msys paths like /c/Users/...
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Used for files which (with CONFIG_SPICE=y) depend on spice header files
to pick up some enum, but which do not depend on on the actual spice
shared library.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201014121120.13482-6-kraxel@redhat.com
After converting from configure to meson, KVM support is lost for MIPS,
so re-enable it in meson.build.
Fixes: fdb75aeff7 ("configure: remove target configuration")
Fixes: 8a19980e3f ("configure: move accelerator logic to meson")
Cc: aolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Message-Id: <1602059975-10115-3-git-send-email-chenhc@lemote.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Over the years, most parts of exec.c that were not specific to softmmu
have been moved to accel/tcg; what's left is mostly the low-level part
of the memory API, which includes RAMBlock and AddressSpaceDispatch.
However exec.c also hosts 4-500 lines of code for the target specific
parts of the CPU QOM object, plus a few functions for user-mode
emulation that do not have a better place (they are not TCG-specific so
accel/tcg/user-exec.c is not a good place either).
Move these parts to a new file, so that exec.c can be moved to
softmmu/physmem.c.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Be consistent creating all the libraries in the main meson.build file.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201006125602.2311423-10-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Be consistent creating all the libraries in the main meson.build file.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201006125602.2311423-9-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Be consistent creating all the libraries in the main meson.build file.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201006125602.2311423-8-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Be consistent creating all the libraries in the main meson.build file.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201006125602.2311423-7-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Be consistent creating all the libraries in the main meson.build file.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201006125602.2311423-6-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Be consistent creating all the libraries in the main meson.build file.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201006125602.2311423-5-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Be consistent creating all the libraries in the main meson.build file.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201006125602.2311423-4-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201006125602.2311423-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201006125602.2311423-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Environment variables like CFLAGS are easy to accidentally change. Meson
warns if that happens, but in a project with a lot of configuration that
is easy to lose. It is also surprising behavior since meson caches -D
options and remembers those on reconfiguration (which we rely on,
since configure options become -D options).
By placing the user-provided CFLAGS, CXXFLAGS and LDFLAGS in the
cross file, we at least get consistent behavior. These environment
variables are still ugly and not really recommended, but there are
distros that rely on them. For the gory details, refer to
https://github.com/mesonbuild/meson/issues/4664.
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923092617.1593722-5-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the CFLAGS, CXXFLAGS or LDFLAGS variables are present in the environment,
any modification made within the configure script is passed down to Meson.
This is particularly undesirable for the "-pie" option, since it overrides
"-shared" and thus messes up the linker flags for shared modules.
Using a separate variable therefore fixes the bug, while clarifying that
the scope of these CFLAGS is just the configure script.
We also do not need to pass those variables in config-host.mak; they
were only used for printing the summary now that all submodules are
built with handwritten Meson rules). For now synthesize CFLAGS in the
configuration summary, the next patch will also pass them in a cleaner
way using the cross file.
Reported-by: Frederic Bezies
Analyzed-by: Toolybird
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923092617.1593722-4-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Build the library via the main meson.build just like for capstone.
This improves the current state of affairs in that we will re-link
the qemu executables against a changed libfdt.a, which we wouldn't
do before-hand, and lets us remove the whole recursive make machinery.
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SLIRP uses Meson so it could become a subproject in the future,
but our choice of configure options is not yet supported in Meson
(https://github.com/mesonbuild/meson/pull/7740).
For now, build the library via the main meson.build just like for
capstone.
This improves the current state of affairs in that we will re-link
the qemu executables against a changed libslirp.a, which we wouldn't
do before-hand.
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pass the path to the program to scripts/check_sparse.py, which
previously was not included in config-host.mak. Change
scripts/check_sparse.py to work with cgcc, which seems to
work better with sparse 0.6.x.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
