Some devices need to distinguish cold start reset from waking up from a
suspended state. This patch adds new value to the enum, and updates the
i386 wakeup method to use this new reset type.
Message-ID: <20240904103722.946194-3-jmarcin@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Juraj Marcin <jmarcin@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Currently, both qemu_devices_reset() and MachineClass::reset() use
ShutdownCause for the reason of the reset. However, the Resettable
interface uses ResetState, so ShutdownCause needs to be translated to
ResetType somewhere. Translating it qemu_devices_reset() makes adding
new reset types harder, as they cannot always be matched to a single
ShutdownCause here, and devices may need to check the ResetType to
determine what to reset and if to reset at all.
This patch moves this translation up in the call stack to
qemu_system_reset() and updates all MachineClass children to use the
ResetType instead.
Message-ID: <20240904103722.946194-2-jmarcin@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Juraj Marcin <jmarcin@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Virtio memory devices rely on PCI BARs to expose the contents of memory.
Because of this they cannot be used (yet) with virtio-mmio or virtio-ccw.
In fact the code that is common to virtio-mem and virtio-pmem, which
is in hw/virtio/virtio-md-pci.c, is only included if CONFIG_VIRTIO_PCI
is set. Reproduce the same condition in the Kconfig file, only allowing
VIRTIO_MEM and VIRTIO_PMEM to be defined if the transport supports it.
Without this patch it is possible to create a configuration with
CONFIG_VIRTIO_PCI=n and CONFIG_VIRTIO_MEM=y, but that causes a
linking failure.
Message-ID: <20240906101658.514470-1-pbonzini@redhat.com>
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Since kernel v6.11 loongarch has moved from syscall_nr.h file
to syscall.tbl (26a3b85bac08 ("loongarch: convert to generic syscall
table"))
Update linux-user scripts to be able to retrieve syscall numbers
from linux syscall.tbl instead of syscall_nr.h.
New syscall.tbl is imported from linux v6.11 using updated
scripts/update-syscalltbl.sh
Remove scripts/gensyscalls.sh that is now useless.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20240920151034.859533-6-laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since kernel v6.11 hexagon has moved from syscall_nr.h file
to syscall.tbl (36d69c29759e ("hexagon: use new system call table"))
Update linux-user scripts to be able to retrieve syscall numbers
from linux syscall.tbl instead of syscall_nr.h.
New syscall.tbl is imported from linux v6.11 using updated
scripts/update-syscalltbl.sh
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20240920151034.859533-5-laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since kernel v6.11 riscv has moved from syscall_nr.h file
to syscall.tbl (3db80c999deb ("riscv: convert to generic syscall
table"))
Update linux-user scripts to be able to retrieve syscall numbers
from linux syscall.tbl instead of syscall_nr.h.
New syscall.tbl is imported from linux v6.11 using updated
scripts/update-syscalltbl.sh
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20240920151034.859533-4-laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since kernel v6.11 openrisc has moved from syscall_nr.h file
to syscall.tbl (See 77122bf9e3df ("openrisc: convert to generic syscall
table"))
Update linux-user scripts to be able to retrieve syscall numbers
from linux syscall.tbl instead of syscall_nr.h.
New syscall.tbl is imported from linux v6.11 using updated
scripts/update-syscalltbl.sh
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20240920151034.859533-3-laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since kernel v6.11 aarch64 has moved from syscall_nr.h file
to syscall_64.tbl (See e632bca07c8e ("arm64: generate 64-bit
syscall.tbl"))
Update linux-user scripts to be able to retrieve syscall numbers
from linux syscall_64.tbl instead of syscall_nr.h.
New syscall_64.tbl is imported from linux v6.11 using
updated scripts/update-syscalltbl.sh
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-ID: <20240920151034.859533-2-laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The XT check for the lxvx/stxvx instructions is currently
inverted. This was introduced during the move to decodetree.
>From the ISA:
Chapter 7. Vector-Scalar Extension Facility
Load VSX Vector Indexed X-form
lxvx XT,RA,RB
if TX=0 & MSR.VSX=0 then VSX_Unavailable()
if TX=1 & MSR.VEC=0 then Vector_Unavailable()
...
Let XT be the value 32×TX + T.
The code currently does the opposite:
if (paired || a->rt >= 32) {
REQUIRE_VSX(ctx);
} else {
REQUIRE_VECTOR(ctx);
}
This was already fixed for lxv/stxv at commit "2cc0e449d1 (target/ppc:
Fix lxv/stxv MSR facility check)", but the indexed forms were missed.
Cc: qemu-stable@nongnu.org
Fixes: 70426b5bb7 ("target/ppc: moved stxvx and lxvx from legacy to decodtree")
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-ID: <20240911141651.6914-1-farosas@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These can be simplified to and/or/andc/orc,
avoiding the load of the constantinto a register.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not allow cmpsel_vec to be expanded early, so that we can
make the correct decision wrt the sense of the comparison.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These can be simplified to and/or/andc/orc,
avoiding the load of the constantinto a register.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not allow cmpsel_vec to be expanded early, so that we can
make the correct decision wrt the sense of the comparison.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The avx512 vpblendm* instructions exactly implement cmpsel,
using a predicate input. Of course this matches nicely with
the avx512 predicate comparison instructions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Extend tcg_out_evex_opc to handle the predicate and
zero-merging parameters of the evex prefix.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The sse/avx instruction set only has EQ and GT as direct comparisons.
Other signed comparisons can be generated from swapping and inversion.
However unsigned comparisons are not available and must be transformed
to signed comparisons by biasing the inputs.
The avx512 instruction set has a complete set of comparisons, with
results placed into a predicate register. We can produce the normal
cmp_vec result by using VPMOVM2*.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Place immediate values second in the comparison.
Place destination matches first in the true/false values.
All of this mirrors what we do for integer setcond and movcond.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fold "x = cond ? y : y" to "x = y".
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Expand during output instead of during opcode generation.
Remove x86_vpblendvb_vec opcode, this this removes the only user.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move most of expansion to opcode generation, leaving the
conversion of unsigned to signed to be done in the early phase.
Small inefficiencies, but not incorrect results, are introduced
until cmpsel_vec is converted in the next patch.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Helper function to handle setting of VEXL based
on the type of the operation.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add declaration to tcg-internal.h, making it available for
use from tcg backend vector expanders.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The loop in the 32-bit case of the vector compare operation
was incorrectly incrementing by 8 bytes per iteration instead
of 4 bytes. This caused the function to process only half of
the intended elements.
Cc: qemu-stable@nongnu.org
Fixes: 9622c697d1 (tcg: Add gvec compare with immediate and scalar operand)
Signed-off-by: TANG Tiancheng <tangtiancheng.ttc@alibaba-inc.com>
Reviewed-by: Liu Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240904142739.854-2-zhiwei_liu@linux.alibaba.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The use of tcg_last_op does not interact well with
TCGContext.emit_before_op, resulting in the label
being linked to something other than the branch op.
In this case it is easier to simply collect the emitted
branch op and pass it directly to add_as_label_use.
Reported-by: Elisha Hollander <just4now666666@gmail.com>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
TCGOp to be propagated further in the next patch.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The 'GPL-2.0' license identifier has been deprecated since license
list version 3.0 [1] and replaced by the 'GPL-2.0-only' tag [2].
[1] https://spdx.org/licenses/GPL-2.0.html
[2] https://spdx.org/licenses/GPL-2.0-only.html
Mechanical patch running:
$ sed -i -e s/GPL-2.0/GPL-2.0-only/ \
$(git grep -l 'SPDX-License-Identifier: GPL-2.0[ $]' \
| egrep -v '^linux-headers|^include/standard-headers')
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The 'GPL-2.0+' license identifier has been deprecated since license
list version 2.0rc2 [1] and replaced by the 'GPL-2.0-or-later' [2]
tag.
[1] https://spdx.org/licenses/GPL-2.0+.html
[2] https://spdx.org/licenses/GPL-2.0-or-later.html
Mechanical patch running:
$ sed -i -e s/GPL-2.0+/GPL-2.0-or-later/ \
$(git grep -lP 'SPDX-License-Identifier: \W+GPL-2.0\+[ $]' \
| egrep -v '^linux-headers|^include/standard-headers')
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The 'LGPL-2.0+' license identifier has been deprecated since license
list version 2.0rc2 [1] and replaced by the 'LGPL-2.0-or-later' [2]
tag.
[1] https://spdx.org/licenses/LGPL-2.0+.html
[2] https://spdx.org/licenses/LGPL-2.0-or-later.html
Mechanical patch running:
$ sed -i -e s/LGPL-2.0+/LGPL-2.0-or-later/ \
$(git grep -l 'SPDX-License-Identifier: LGPL-2.0+$')
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since the "2 | 3+" expression can be simplified as "2+",
it is pointless to mention the GPLv3 license.
Add the corresponding SPDX identifier to remove all doubt.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Alex Bennée <alex.bennee@linaro.org>
Fixes: 9f95111474 ("tests/avocado: re-factor igb test to avoid timeouts")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since commit 139c1837db ("meson: rename included C source files
to .c.inc"), QEMU standard procedure for included C files is to
use *.c.inc.
Besides, since commit 6a0057aa22 ("docs/devel: make a statement
about includes") this is documented in the Coding Style:
If you do use template header files they should be named with
the ``.c.inc`` or ``.h.inc`` suffix to make it clear they are
being included for expansion.
Rename "test_akcipher_keys.inc" as "test_akcipher_keys.c.inc".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since commits 139c1837db ("meson: rename included C source files
to .c.inc") and 0979ed017f ("meson: rename .inc.h files to .h.inc"),
EMU standard procedure for included header files is to use *.h.inc.
Besides, since commit 6a0057aa22 ("docs/devel: make a statement
about includes") this is documented in the Coding Style:
If you do use template header files they should be named with
the ``.c.inc`` or ``.h.inc`` suffix to make it clear they are
being included for expansion.
Therefore rename "macros.inc" as "macros.h.inc".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Looks like a copy-n-paste mistake while adding the or1k_sim test
here: The test downloads an asset from the internet, so it should
be in the thorough category, not in the quick one.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit 0ea0538fae516f9b4 removed the default machine of the sh4
binaries, so a lot of iotests are failing now without such a default
machine. Teach the iotest harness to use the "r2d" machine instead
to fix this problem.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When compiling QEMU just with "--target-list=or1k-softmmu", there
are 8 iotests failing that try to use PCI devices - but the default
or1k machine does not have a PCI bus. The "virt" machine is better
suited for running the iotests than the or1k default machine since
it provides PCI and thus e.g. support for virtio-blk and virtio-scsi,
too. With this change, there are no failing iotests anymore when
using the qemu-system-or1k binary for running the tests.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
qemu_get_exec_dir has been unused since commit:
5bebe03f51 ("util/cutils: Clean up global variable shadowing in get_relocated_path()")
Remove it, and fix up a comment that pointed to it.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The last use of sysbus_mmio_unmap was removed by
981b1c6266 ("spapr/xive: rework the mapping the KVM memory regions")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
envlist_parse, envlist_parse_set, envlist_parse_unset were added
in 2009 but never used, see:
04a6dfebb6 ("linux-user: Add generic env variable handling")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
DM163 is an emulated 8x8 LED matrix. This commit flips the image
horizontally so it's rendered the same way as on the hardware.
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The System Control and Management Interface is specific to arm
machines, so don't include this device in non-arm targets.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fix a typo to run the pbkdf crypto cipher tests on macOS.
$ make check-unit
...
87/102 qemu:unit / test-crypto-pbkdf OK 2.35s 17 subtests passed
Fixes: ebe0302ac8 ("tests/unit: build pbkdf test on macOS")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
