Extract page-protection definitions from "exec/cpu-all.h"
to "exec/page-protection.h".
The list of files requiring the new header was generated
using:
$ git grep -wE \
'PAGE_(READ|WRITE|EXEC|RWX|VALID|ANON|RESERVED|TARGET_.|PASSTHROUGH)'
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240427155714.53669-3-philmd@linaro.org>
The following CPUTLBEntry helpers are only used in accel/tcg/cputlb.c:
- tlb_index()
- tlb_entry()
- tlb_read_idx()
- tlb_addr_write()
Move them to this file, allowing to remove the huge "cpu.h" header
inclusion from "exec/cpu_ldst.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240418192525.97451-13-philmd@linaro.org>
tlb_set_dirty() is only used in accel/tcg/cputlb.c,
where it is defined. Declare it statically, removing
the stub.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240418192525.97451-11-philmd@linaro.org>
This creates a per-page method for checking of alignment.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240301204110.656742-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allow the target to set tlb flags to apply to all of the
comparators. Remove MemTxAttrs.byte_swap, as the bit is
not relevant to memory transactions, only the page mapping.
Adjust target/sparc to set TLB_BSWAP directly.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240301204110.656742-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On i386, after fixing the page walking code to work with pages in
MMIO memory (specifically CXL emulated interleaved memory),
a crash was seen in an interrupt handling path.
Useful part of backtrace
7 0x0000555555ab1929 in bql_lock_impl (file=0x555556049122 "../../accel/tcg/cputlb.c", line=2033) at ../../system/cpus.c:524
8 bql_lock_impl (file=file@entry=0x555556049122 "../../accel/tcg/cputlb.c", line=line@entry=2033) at ../../system/cpus.c:520
9 0x0000555555c9f7d6 in do_ld_mmio_beN (cpu=0x5555578e0cb0, full=0x7ffe88012950, ret_be=ret_be@entry=0, addr=19595792376, size=size@entry=8, mmu_idx=4, type=MMU_DATA_LOAD, ra=0) at ../../accel/tcg/cputlb.c:2033
10 0x0000555555ca0fbd in do_ld_8 (cpu=cpu@entry=0x5555578e0cb0, p=p@entry=0x7ffff4efd1d0, mmu_idx=<optimized out>, type=type@entry=MMU_DATA_LOAD, memop=<optimized out>, ra=ra@entry=0) at ../../accel/tcg/cputlb.c:2356
11 0x0000555555ca341f in do_ld8_mmu (cpu=cpu@entry=0x5555578e0cb0, addr=addr@entry=19595792376, oi=oi@entry=52, ra=0, ra@entry=52, access_type=access_type@entry=MMU_DATA_LOAD) at ../../accel/tcg/cputlb.c:2439
12 0x0000555555ca5f59 in cpu_ldq_mmu (ra=52, oi=52, addr=19595792376, env=0x5555578e3470) at ../../accel/tcg/ldst_common.c.inc:169
13 cpu_ldq_le_mmuidx_ra (env=0x5555578e3470, addr=19595792376, mmu_idx=<optimized out>, ra=ra@entry=0) at ../../accel/tcg/ldst_common.c.inc:301
14 0x0000555555b4b5fc in ptw_ldq (ra=0, in=0x7ffff4efd320) at ../../target/i386/tcg/sysemu/excp_helper.c:98
15 ptw_ldq (ra=0, in=0x7ffff4efd320) at ../../target/i386/tcg/sysemu/excp_helper.c:93
16 mmu_translate (env=env@entry=0x5555578e3470, in=0x7ffff4efd3e0, out=0x7ffff4efd3b0, err=err@entry=0x7ffff4efd3c0, ra=ra@entry=0) at ../../target/i386/tcg/sysemu/excp_helper.c:174
17 0x0000555555b4c4b3 in get_physical_address (ra=0, err=0x7ffff4efd3c0, out=0x7ffff4efd3b0, mmu_idx=0, access_type=MMU_DATA_LOAD, addr=18446741874686299840, env=0x5555578e3470) at ../../target/i386/tcg/sysemu/excp_helper.c:580
18 x86_cpu_tlb_fill (cs=0x5555578e0cb0, addr=18446741874686299840, size=<optimized out>, access_type=MMU_DATA_LOAD, mmu_idx=0, probe=<optimized out>, retaddr=0) at ../../target/i386/tcg/sysemu/excp_helper.c:606
19 0x0000555555ca0ee9 in tlb_fill (retaddr=0, mmu_idx=0, access_type=MMU_DATA_LOAD, size=<optimized out>, addr=18446741874686299840, cpu=0x7ffff4efd540) at ../../accel/tcg/cputlb.c:1315
20 mmu_lookup1 (cpu=cpu@entry=0x5555578e0cb0, data=data@entry=0x7ffff4efd540, mmu_idx=0, access_type=access_type@entry=MMU_DATA_LOAD, ra=ra@entry=0) at ../../accel/tcg/cputlb.c:1713
21 0x0000555555ca2c61 in mmu_lookup (cpu=cpu@entry=0x5555578e0cb0, addr=addr@entry=18446741874686299840, oi=oi@entry=32, ra=ra@entry=0, type=type@entry=MMU_DATA_LOAD, l=l@entry=0x7ffff4efd540) at ../../accel/tcg/cputlb.c:1803
22 0x0000555555ca3165 in do_ld4_mmu (cpu=cpu@entry=0x5555578e0cb0, addr=addr@entry=18446741874686299840, oi=oi@entry=32, ra=ra@entry=0, access_type=access_type@entry=MMU_DATA_LOAD) at ../../accel/tcg/cputlb.c:2416
23 0x0000555555ca5ef9 in cpu_ldl_mmu (ra=0, oi=32, addr=18446741874686299840, env=0x5555578e3470) at ../../accel/tcg/ldst_common.c.inc:158
24 cpu_ldl_le_mmuidx_ra (env=env@entry=0x5555578e3470, addr=addr@entry=18446741874686299840, mmu_idx=<optimized out>, ra=ra@entry=0) at ../../accel/tcg/ldst_common.c.inc:294
25 0x0000555555bb6cdd in do_interrupt64 (is_hw=1, next_eip=18446744072399775809, error_code=0, is_int=0, intno=236, env=0x5555578e3470) at ../../target/i386/tcg/seg_helper.c:889
26 do_interrupt_all (cpu=cpu@entry=0x5555578e0cb0, intno=236, is_int=is_int@entry=0, error_code=error_code@entry=0, next_eip=next_eip@entry=0, is_hw=is_hw@entry=1) at ../../target/i386/tcg/seg_helper.c:1130
27 0x0000555555bb87da in do_interrupt_x86_hardirq (env=env@entry=0x5555578e3470, intno=<optimized out>, is_hw=is_hw@entry=1) at ../../target/i386/tcg/seg_helper.c:1162
28 0x0000555555b5039c in x86_cpu_exec_interrupt (cs=0x5555578e0cb0, interrupt_request=<optimized out>) at ../../target/i386/tcg/sysemu/seg_helper.c:197
29 0x0000555555c94480 in cpu_handle_interrupt (last_tb=<synthetic pointer>, cpu=0x5555578e0cb0) at ../../accel/tcg/cpu-exec.c:844
Peter identified this as being due to the BQL already being
held when the page table walker encounters MMIO memory and attempts
to take the lock again. There are other examples of similar paths
TCG, so this follows the approach taken in those of simply checking
if the lock is already held and if it is, don't take it again.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240219173153.12114-4-Jonathan.Cameron@huawei.com>
[rth: Use BQL_LOCK_GUARD]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The term "iothread lock" is obsolete. The APIs use Big QEMU Lock (BQL)
in their names. Update the code comments to use "BQL" instead of
"iothread lock".
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-id: 20240102153529.486531-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The Big QEMU Lock (BQL) has many names and they are confusing. The
actual QemuMutex variable is called qemu_global_mutex but it's commonly
referred to as the BQL in discussions and some code comments. The
locking APIs, however, are called qemu_mutex_lock_iothread() and
qemu_mutex_unlock_iothread().
The "iothread" name is historic and comes from when the main thread was
split into into KVM vcpu threads and the "iothread" (now called the main
loop thread). I have contributed to the confusion myself by introducing
a separate --object iothread, a separate concept unrelated to the BQL.
The "iothread" name is no longer appropriate for the BQL. Rename the
locking APIs to:
- void bql_lock(void)
- void bql_unlock(void)
- bool bql_locked(void)
There are more APIs with "iothread" in their names. Subsequent patches
will rename them. There are also comments and documentation that will be
updated in later patches.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Acked-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20240102153529.486531-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Without this, we just dirty a single byte, and so if the caller writes
more than one byte to the host memory then we won't have invalidated any
translation blocks that start after the first byte and overlap those
writes. In particular, AArch64's DC ZVA implementation uses probe_access
(via probe_write), and so we don't invalidate the entire block, only the
TB overlapping the first byte (and, in the unusual case an unaligned VA
is given to the instruction, we also probe that specific address in
order to get the right VA reported on an exception, so will invalidate a
TB overlapping that address too). Since our IC IVAU implementation is a
no-op for system emulation that relies on the softmmu already having
detected self-modifying code via this mechanism, this means we have
observably wrong behaviour when jumping to code that has been DC ZVA'ed.
In practice this is an unusual thing for software to do, as in reality
the OS will DC ZVA the page and the application will go and write actual
instructions to it that aren't UDF #0, but you can write a test that
clearly shows the faulty behaviour.
For functions other than probe_access it's not clear what size to use
when 0 is passed in. Arguably a size of 0 shouldn't dirty at all, since
if you want to actually write then you should pass in a real size, but I
have conservatively kept the implementation as dirtying the first byte
in that case so as to avoid breaking any assumptions about that
behaviour.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Message-Id: <20231104031232.3246614-1-jrtc27@jrtc27.com>
[rth: Move the dirtysize computation next to notdirty_write.]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
"exec/cpu-common.h" is meant to contain the declarations
related to CPU usable with any accelerator / target
combination.
tcg_flush_jmp_cache() is specific to TCG, so restrict its
declaration by moving it to "exec/tb-flush.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230918104153.24433-2-philmd@linaro.org>
Store bytes under a mask is fundamentally a cmpxchg, not a straight store.
Use HAVE_CMPXCHG128 instead of HAVE_ATOMIC128_RW.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230916220151.526140-8-richard.henderson@linaro.org>
Move all of it into accel/tcg/monitor.c. This puts everything
about tcg that is only used by the monitor in the same place.
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
cpu_in_serial_context() is not target specific,
move it declaration to "internal-common.h" (which
we include in the 4 source files modified).
Remove the unused "exec/exec-all.h" header from
cpu-exec-common.c. There is no more target specific
code in this file: make it target agnostic.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-12-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
accel/tcg/internal.h contains target specific declarations.
Unit files including it become "target tainted": they can not
be compiled as target agnostic. Rename using the '-target'
suffix to make this explicit.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-9-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A large chunk of ld/st functions are moved from cputlb.c and user-exec.c
to ldst_common.c.inc as their implementation is the same between both
modes.
Eventually, ldst_common.c.inc could be compiled into a separate
target-specific compilation unit, and be linked in with the targets.
Keeping CPUArchState usage out of cputlb.c (CPUArchState is primarily
used to access the mmu index in these functions).
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-12-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The prototype of do_[st|ld]*_mmu() is unified between system- and
user-mode allowing a large chunk of helper_[st|ld]*() and cpu_[st|ld]*()
functions to be expressed in same manner between both modes. These
functions will be moved to ldst_common.c.inc in a following commit.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-11-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Makes ldst_atomicity.c.inc almost target-independent, with the exception
of TARGET_PAGE_MASK, which will be addressed in a future patch.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-8-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The goal is to (in the future) allow for per-target compilation of
functions in atomic_template.h whilst atomic_mmu_lookup() and cputlb.c
are compiled once-per user- or system mode.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-7-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[rth: Use cpu->neg.tlb instead of cpu_tlb()]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
do_[ld|st]*() and mmu_lookup*() are changed to use CPUState over
CPUArchState, moving the target-dependence to the target-facing facing
cpu_[ld|st] functions.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-6-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[rth: Use cpu->neg.tlb instead of cpu_tlb; cpu_env instead of env_ptr.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
probe_access_internal() is changed to instead take the generic CPUState
over CPUArchState, in order to lessen the target-specific coupling of
cputlb.c. Note: probe_access*() also don't need the full CPUArchState,
but aren't touched in this patch as they are target-facing.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-5-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[rth: Use cpu->neg.tlb instead of cpu_tlb()]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Changes tlb_*() functions to take CPUState instead of CPUArchState, as
they don't require the full CPUArchState. This makes it easier to
decouple target-(in)dependent code.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-4-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[rth: Use cpu->neg.tlb instead of cpu_tlb()]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Minimize the displacement to can_do_io, since it may
be touched at the start of each TranslationBlock.
It fits into other padding within the substructure.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split out int_st_mmio_leN, to be used by both do_st_mmio_leN
and do_st16_mmio_leN. Move the locks down into the two
functions, since each one now covers all accesses to once page.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split out int_ld_mmio_beN, to be used by both do_ld_mmio_beN
and do_ld16_mmio_beN. Move the locks down into the two
functions, since each one now covers all accesses to once page.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Avoid multiple calls to io_prepare for unaligned acceses.
One call to do_st_mmio_leN will never cross pages.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Avoid multiple calls to io_prepare for unaligned acceses.
One call to do_ld_mmio_beN will never cross pages.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Push computation down into the if statements to the point
the data is used.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rather than saving MemoryRegionSection and offset,
save phys_addr and MemoryRegion. This matches up
much closer with the plugin api.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since the introduction of CPUTLBEntryFull, we can recover
the full cpu address space physical address without having
to examine the MemoryRegionSection.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These are common code from io_readx and io_writex.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that we defer address space update and tlb_flush until
the next async_run_on_cpu, the plugin run at the end of the
instruction no longer has to contend with a flushed tlb.
Therefore, delete SavedIOTLB entirely.
Properly return false from tlb_plugin_lookup when we do
not have a tlb match.
Fixes a bug in which SavedIOTLB had stale data, because
there were multiple i/o accesses within a single insn.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When memory region is ram, the lower TARGET_PAGE_BITS is not the
physical section number. Instead, its value is always 0.
Add comment and assert to make it clear.
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-Id: <20230901060118.379-1-zhiwei_liu@linux.alibaba.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
As we are now using vaddr for representing guest addresses, update the
static assert to check that vaddr fits in the run_on_cpu_data union.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230807155706.9580-10-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230807155706.9580-9-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Changes the address type of the guest memory read/write functions from
target_ulong to abi_ptr. (abi_ptr is currently typedef'd to target_ulong
but that will change in a following commit.) This will reduce the
coupling between accel/ and target/.
Note: Function pointers that point to cpu_[st|ld]*() in target/riscv and
target/rx are also updated in this commit.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230807155706.9580-6-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Apply save_iotlb_data() to io_readx() as well as to io_writex().
This fixes SEGFAULT on qemu_plugin_hwaddr_phys_addr() call plugins
for addresses inside of MMIO region.
Signed-off-by: Dmitriy Solovev <d.solovev@yadro.com>
Signed-off-by: Mikhail Tyutin <m.tyutin@yadro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230804110903.19968-1-m.tyutin@yadro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In the single-page case we were issuing misaligned i/o to
the memory subsystem, which does not handle it properly.
Split such accesses via do_{ld,st}_mmio_*.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1800
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If the address and size are aligned, send larger chunks
to the memory subsystem. This will be required to make
more use of these helpers.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace MMULookupPageData* with CPUTLBEntryFull, addr, size.
Move QEMU_IOTHREAD_LOCK_GUARD to the caller.
This simplifies the usage from do_ld16_beN and do_st16_leN, where
we weren't locking the entire operation, and required hoop jumping
for passing addr and size.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In replacing target_ulong with vaddr and TARGET_FMT_lx with VADDR_PRIx,
the zero-padding of TARGET_FMT_lx got lost. Readd 16-wide zero-padding
for logging consistency.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230713120746.26897-1-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We adjust CONFIG_ATOMIC128 and CONFIG_CMPXCHG128 with
CONFIG_ATOMIC128_OPT in atomic128.h. It is difficult
to tell when those changes have been applied with the
ifdef we must use with CONFIG_CMPXCHG128. So instead
use HAVE_CMPXCHG128, which triggers -Werror-undef when
the proper header has not been included.
Improves tcg_gen_atomic_cmpxchg_i128 for s390x host, which
requires CONFIG_ATOMIC128_OPT. Without this we fall back
to EXCP_ATOMIC to single-step 128-bit atomics, which is
slow enough to cause some tests to time out.
Reported-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The lack of SVE memory instrumentation has been an omission in plugin
handling since it was introduced. Fortunately we can utilise the
probe_* functions to force all all memory access to follow the slow
path. We do this by checking the access type and presence of plugin
memory callbacks and if set return the TLB_MMIO flag.
We have to jump through a few hoops in user mode to re-use the flag
but it was the desired effect:
./qemu-system-aarch64 -display none -serial mon:stdio \
-M virt -cpu max -semihosting-config enable=on \
-kernel ./tests/tcg/aarch64-softmmu/memory-sve \
-plugin ./contrib/plugins/libexeclog.so,ifilter=st1w,afilter=0x40001808 -d plugin
gives (disas doesn't currently understand st1w):
0, 0x40001808, 0xe54342a0, ".byte 0xa0, 0x42, 0x43, 0xe5", store, 0x40213010, RAM, store, 0x40213014, RAM, store, 0x40213018, RAM
And for user-mode:
./qemu-aarch64 \
-plugin contrib/plugins/libexeclog.so,afilter=0x4007c0 \
-d plugin \
./tests/tcg/aarch64-linux-user/sha512-sve
gives:
1..10
ok 1 - do_test(&tests[i])
0, 0x4007c0, 0xa4004b80, ".byte 0x80, 0x4b, 0x00, 0xa4", load, 0x5500800370, load, 0x5500800371, load, 0x5500800372, load, 0x5500800373, load, 0x5500800374, load, 0x5500800375, load, 0x5500800376, load, 0x5500800377, load, 0x5500800378, load, 0x5500800379, load, 0x550080037a, load, 0x550080037b, load, 0x550080037c, load, 0x550080037d, load, 0x550080037e, load, 0x550080037f, load, 0x5500800380, load, 0x5500800381, load, 0x5500800382, load, 0x5500800383, load, 0x5500800384, load, 0x5500800385, load, 0x5500800386, lo
ad, 0x5500800387, load, 0x5500800388, load, 0x5500800389, load, 0x550080038a, load, 0x550080038b, load, 0x550080038c, load, 0x550080038d, load, 0x550080038e, load, 0x550080038f, load, 0x5500800390, load, 0x5500800391, load, 0x5500800392, load, 0x5500800393, load, 0x5500800394, load, 0x5500800395, load, 0x5500800396, load, 0x5500800397, load, 0x5500800398, load, 0x5500800399, load, 0x550080039a, load, 0x550080039b, load, 0x550080039c, load, 0x550080039d, load, 0x550080039e, load, 0x550080039f, load, 0x55008003a0, load, 0x55008003a1, load, 0x55008003a2, load, 0x55008003a3, load, 0x55008003a4, load, 0x55008003a5, load, 0x55008003a6, load, 0x55008003a7, load, 0x55008003a8, load, 0x55008003a9, load, 0x55008003aa, load, 0x55008003ab, load, 0x55008003ac, load, 0x55008003ad, load, 0x55008003ae, load, 0x55008003af
(4007c0 is the ld1b in the sha512-sve)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Robert Henry <robhenry@microsoft.com>
Cc: Aaron Lindsay <aaron@os.amperecomputing.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-20-alex.bennee@linaro.org>
This frees up one bit of the primary tlb flags without
impacting the TLB_NOTDIRTY logic.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have run out of bits we can use within the CPUTLBEntry comparators,
as TLB_FLAGS_MASK cannot overlap alignment.
Store slow_flags[] in CPUTLBEntryFull, and merge with the flags from
the comparator. A new TLB_FORCE_SLOW bit is set within the comparator
as an indication that the slow path must be used.
Move TLB_BSWAP to TLB_SLOW_FLAGS_MASK. Since we are out of bits,
we cannot create a new bit without moving an old one.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Bring the helpers into line with the rest of tcg in respecting
guest memory ordering.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Update atomic_mmu_lookup() and cpu_mmu_lookup() to take the guest
virtual address as a vaddr instead of a target_ulong.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621135633.1649-10-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Functions for probing memory accesses (and functions that call these)
are updated to take a vaddr for guest virtual addresses over
target_ulong.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621135633.1649-9-anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
