Make "drive_backup" available on the HMP monitor:
drive_backup [-n] [-f] device target [format]
The -n flag requests QEMU to reuse the image found in new-image-file,
instead of recreating it from scratch.
The -f flag requests QEMU to copy the whole disk, so that the result
does not need a backing file. Note that this flag *must* currently be
passed since the other sync modes ('none' and 'top') have not been
implemented yet. Requiring it ensures that "drive_backup" behaves like
"drive_mirror".
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
pci-hotplug.c and the CONFIG_PCI_HOTPLUG variable which controls its
compilation are misnamed. They're not about PCI hotplug in general, but
rather about the pci_add/pci_del interface which are now deprecated in
favour of the more general device_add/device_del interface. This patch
therefore renames them to pci-hotplug-old.c and CONFIG_PCI_HOTPLUG_OLD.
CONFIG_PCI_HOTPLUG=y was listed twice in {i386,x86_64}-softmmu.make for no
particular reason, so we clean that up too. In addition it was included in
ppc64-softmmu.mak for which the old hotplug interface was never used and is
unsuitable, so we remove that too.
Most of pci-hotplug.c was additionaly protected by #ifdef TARGET_I386. The
small piece which wasn't is only called from the pci_add and pci_del hooks
in hmp-commands.hx, which themselves were protected by #ifdef TARGET_I386.
This patch therefore also removes the #ifdef from pci-hotplug-old.c,
and changes the ifdefs in hmp-commands.hx to use CONFIG_PCI_HOTPLUG_OLD.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qmp_dump_guest_memory() calls dump_init() and returns an Error when
cpu_get_dump_info() returns an error, as done by the stub.
So there is no need to have a stub for qmp_dump_guest_memory().
Enable the documentation of the always-present dump-guest-memory command.
That way we can drop CONFIG_HAVE_CORE_DUMP and leave configure
completely out of the picture for target CPU features.
Signed-off-by: Andreas Färber <afaerber@suse.de>
It was decided to not make this command available in QMP in order to
make clear that this is not supposed to be a stable API and should be
used only for testing and debugging purposes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Paolo Bonzini <pbonzini@redhat.com> suggested the following test case:
1. Launch a guest and wait at the GRUB boot menu:
qemu-system-x86_64 -enable-kvm -m 1024 \
-drive if=none,cache=none,file=test.img,id=foo,werror=stop,rerror=stop
-device virtio-blk-pci,drive=foo,id=virtio0,addr=4
2. Hot unplug the device:
(qemu) drive_del foo
3. Select the first boot menu entry
Without this patch the guest pauses due to ENOMEDIUM. The guest is
stuck in a continuous pause loop since the I/O request is retried and
fails immediately again when the guest is resumed.
With this patch the error is reported to the guest.
Note that this scenario actually happens sometimes during libvirt disk
hot unplug, where device_del is followed by drive_del. I/O may still be
submitted to the drive after drive_del if the guest does not process the
PCI hot unplug notification.
Reported-by: Dafna Ron <dron@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Several targets can have wavcapture/-soundhw support via PCI cards.
HAS_AUDIO is a useless limitation, remove it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1366303444-24620-4-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This reverts commit 4d700430a2 as asked by
Luiz. The patch has been obsoleted by extending MachineInfo structure
by cpu-max field.
Signed-off-by: Michal Novotny <minovotn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
These commands return the maximum number of CPUs supported by the
currently running emulator instance, as defined in its QEMUMachine
struct.
Signed-off-by: Michal Novotny <minovotn@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This patch adds support for TPM command line options.
The command line options supported here are
./qemu-... -tpmdev passthrough,path=<path to TPM device>,id=<id>
-device tpm-tis,tpmdev=<id>,id=<other id>
and
./qemu-... -tpmdev help
where the latter works similar to -soundhw help and shows a list of
available TPM backends (for example 'passthrough').
Using the type parameter, the backend is chosen, i.e., 'passthrough' for the
passthrough driver. The interpretation of the other parameters along
with determining whether enough parameters were provided is pushed into
the backend driver, which needs to implement the interface function
'create' and return a TPMDriverOpts structure if the VM can be started or
'NULL' if not enough or bad parameters were provided.
Monitor support for 'info tpm' has been added. It for example prints the
following:
(qemu) info tpm
TPM devices:
tpm0: model=tpm-tis
\ tpm0: type=passthrough,path=/dev/tpm0,cancel-path=/sys/devices/pnp0/00:09/cancel
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-2-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Switch the default for qemu_log logging output from "/tmp/qemu.log"
to stderr. This is an incompatible change in some sense, but logging
is mostly used for debugging purposes so it shouldn't affect production
use. The previous behaviour can be obtained by adding "-D /tmp/qemu.log"
to the command line.
This change requires us to:
* update all the documentation/help text (we take the opportunity
to smooth out minor inconsistencies between the phrasing in
linux-user/bsd-user/system help messages)
* make linux-user and bsd-user defer to qemu-log for the default
logging destination rather than overriding it themselves
* ensure that all logfile closing is done via qemu_log_close()
and that that function doesn't close stderr
as well as the obvious change to the behaviour of do_qemu_set_log()
when no logfile name has been specified.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1361901160-28729-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
As a general rule, HMP commands must be built on top of the QMP API.
Luiz and others have worked long & hard to make HMP conform to this
rule.
Commit f1088908 added chardev-add, in violation of this rule. QMP
command chardev-add was added right before, with minimal features, and
the idea to complete it step by step, then switch over the HMP command
to use it.
Unfortunately, we're not there, yet, and we don't want to release with
chardev-add in a "HMP is more powerful than QMP" state.
Disable the HMP command for now, along with its chardev-remove buddy.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
New device, has never been released, so we can still improve things
without worrying about compatibility.
Naming is a mess. The code calls the device driver CirMemCharDriver,
the public API calls it "memory", "memchardev", or "memchar", and the
special commands are named like "memchar-FOO". "memory" is a
particularly unfortunate choice, because there's another character
device driver called MemoryDriver. Moreover, the device's distinctive
property is that it's a ring buffer, not that's in memory. Therefore:
* Rename CirMemCharDriver to RingBufCharDriver, and call the thing a
"ringbuf" in the API.
* Rename QMP and HMP commands from memchar-FOO to ringbuf-FOO.
* Rename device parameter from maxcapacity to size (simple words are
good for you).
* Clearly mark the parameter as optional in documentation.
* Fix error reporting so that chardev-add reports to current monitor,
not stderr.
* Replace cirmem in C identifiers by ringbuf.
* Rework documentation. Document the impact of our crappy UTF-8
handling on reading.
* QMP examples that even work.
I could split this up into multiple commits, but they'd change the
same documentation lines multiple times. Not worth it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now info command takes a table of sub info commands,
and changed do_info() to do_info_help() to do help funtion
only.
Note that now "info <unknown-topic>" returns error instead
of list of info topics.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Add chardev-add and chardev-remove commands to the human monitor.
chardev-add accepts the same syntax as -chardev, chardev-remove
expects a chardev id.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
commit 88affa1c monitor: remove unused do_info_trace
has removed "info trace" function from monitor, so remove it from documents.
Signed-off-by: Liming Wang <walimisdev@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds the monitor commands that start the mirroring job.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
While streaming can be dropped as soon as it progressed through the whole
image, mirroring needs to be completed manually for two reasons: 1) so that
management knows exactly when the VM switches to the target; 2) because
for other use cases such as replication, we may leave the operation running
for the whole life of the virtual machine.
Add a new block job command that manually completes background operations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* kwolf/for-anthony: (30 commits)
qemu-iotests: add tests for streaming error handling
qemu-iotests: map underscore to dash in QMP argument names
blkdebug: process all set_state rules in the old state
stream: add on-error argument
block: introduce block job error
iostatus: reorganize io error code
iostatus: change is_read to a bool
iostatus: move BlockdevOnError declaration to QAPI
iostatus: rename BlockErrorAction, BlockQMPEventAction
qemu-iotests: add test for pausing a streaming operation
qmp: add block-job-pause and block-job-resume
block: add support for job pause/resume
qmp: add 'busy' member to BlockJobInfo
block: add block_job_query
block: move job APIs to separate files
block: fix documentation of block_job_cancel_sync
qerror/block: introduce QERR_BLOCK_JOB_NOT_ACTIVE
qemu-iotests: add initial tests for live block commit
QAPI: add command for live block commit, 'block-commit'
block: helper function, to find the base image of a chain
...
Add QMP commands matching the functionality.
Paused jobs cannot be canceled without first resuming them. This
ensures that I/O errors are never missed by management. However, an
optional force argument can be specified to allow that.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Today, it's necessary to specify the protocol you want to use
when dumping the guest memory, for example:
(qemu) dump-guest-memory file:/tmp/guest-memory
This has a few issues:
1. It's cumbersome to type
2. We loose file path autocompletion
3. Being able to specify fd:X in HMP makes little sense for humans
Because of these reasons, hardcode the 'protocol' argument to
'file:' in HMP.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Convert 'sendkey' to use QAPI.
QAPI passes key's index of mapping table to qmp_send_key(),
not keycode. So we use help functions to convert key/code to
index of key_defs, and 'index' will be converted to 'keycode'
inside qmp_send_key().
For qmp, QAPI would check invalid key and raise error.
For hmp, invalid key is checked in hmp_send_key().
'send-key' of QMP doesn't support key in hexadecimal format.
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
(qemu) sendkey a
(qemu) sendkey 0x1e
(qemu) sendkey #0x1e
unknown key: '#0x1e'
The last command doesn't work, '#' is not requested before
raw values, and the raw value in decimal format is not supported.
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Change XBZRLE cache size in bytes (the size should be a power of 2, it will be
rounded down to the nearest power of 2).
If XBZRLE cache size is too small there will be many cache miss.
New query-migrate-cache-size QMP command and 'info migrate_cache_size' HMP
command to query cache value.
Signed-off-by: Benoit Hudzia <benoit.hudzia@sap.com>
Signed-off-by: Petter Svard <petters@cs.umu.se>
Signed-off-by: Aidan Shribman <aidan.shribman@sap.com>
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The management can enable/disable a capability for the next migration by using
migrate-set-capabilities QMP command.
The user can use migrate_set_capability HMP command.
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The management can query the current migration capabilities using
query-migrate-capabilities QMP command.
The user can use 'info migrate_capabilities' HMP command.
Currently only XBZRLE capability is available.
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Talk about background operations in general, rather than specifically
about streaming.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is not a full QAPI conversion, but an intermediate step.
In essence, do_netdev_add() is split into three functions:
1. netdev_add(): performs the actual work. This function is fully
converted to Error (thus, it's "qapi-friendly")
2. qmp_netdev_add(): the QMP front-end for netdev_add(). This is
coded by hand and not auto-generated (gen=no in the schema). The
reason for this it's a lot easier and simpler to with QemuOpts
this way
3. hmp_netdev_add(): HMP front-end.
This design was suggested by Paolo Bonzini.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-By: Laszlo Ersek <lersek@redhat.com>
The command's usage:
dump-guest-memory [-p] protocol [begin] [length]
The supported protocol can be file or fd:
1. file: the protocol starts with "file:", and the following string is
the file's path.
2. fd: the protocol starts with "fd:", and the following string is the
fd's name.
Note:
1. If you want to use gdb to process the core, please specify -p option.
The reason why the -p option is not default is:
a. guest machine in a catastrophic state can have corrupted memory,
which we cannot trust.
b. The guest machine can be in read-mode even if paging is enabled.
For example: the guest machine uses ACPI to sleep, and ACPI sleep
state goes in real-mode.
2. If you don't want to dump all guest's memory, please specify the start
physical address and the length.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Allow streaming operations to be started with an initial speed limit.
This eliminates the window of time between starting streaming and
issuing block-job-set-speed. Users should use the new optional 'speed'
parameter instead so that speed limits are in effect immediately when
the job starts.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The migrate command is one of those commands where HMP and QMP completely
mix up together. This made the conversion to the QAPI (which separates the
command into QMP and HMP parts) a bit difficult.
The first important change to be noticed is that this commit completes the
removal of the Monitor object from migration code, started by the previous
commit.
Another important and tricky change is about supporting the non-detached
mode. That is, if the user doesn't pass '-d' the migrate command will lock
the monitor and will only release it when migration is finished.
To support this in the new HMP command (hmp_migrate()), it is necessary
to create a timer which runs every second and checks if the migration is
still active. If it is, the timer callback will re-schedule itself to run
one second in the future. If the migration has already finished, the
monitor lock is released and the user can use it normally.
All these changes should be transparent to the user.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Simplify the blockdev-snapshot-sync code and gain failsafe operation
by turning it into a wrapper around the new transaction command. A new
option is also added matching "mode".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds the system_wakeup monitor command which will simply
wake up suspended guests.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add block_job_cancel, which stops an active block streaming operation.
When the operation has been cancelled the new BLOCK_JOB_CANCELLED event
is emitted.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add block_job_set_speed, which sets the maximum speed for a background
block operation.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add the block_stream command, which starts copy backing file contents
into the image file. Also add the BLOCK_JOB_COMPLETED QMP event which
is emitted when image streaming completes. Later patches add control
over the background copy speed, cancelation, and querying running
streaming operations.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
