bdrv_subtree_drained_end() requires the caller to hold the AioContext
lock for the drained node. Not doing this for nodes outside of the main
AioContext leads to crashes when AIO_WAIT_WHILE() needs to wait and
tries to temporarily release the lock.
Fixes: 3908b7a899
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2046659
Reported-by: Qing Wang <qinwang@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220203140534.36522-2-kwolf@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
TARGET_ABI_FMT_lx isn't available for softmmu which causes confusion
when trying to print. As abi_ptr == target_ulong use its format string
instead.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
It's likely broken, and nobody cared for picking it up again
during the deprecation phase, so let's remove this now.
Since this is the last entry in deprecated_targets_list, remove
the related code in the configure script, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211215084958.185214-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220112112722.3641051-32-alex.bennee@linaro.org>
We can't always guarantee we get to the end of a translator loop.
Although this can happen for a variety of reasons it does happen more
often on x86 system emulation when an instruction spans across to an
un-faulted page. This caused confusion of the instruction tracking
data resulting in apparent reverse execution (at least from the
plugins point of view).
Fix this by moving the reset code to plugin_gen_tb_start so we always
start with a clean slate.
We unconditionally reset tcg_ctx->plugin_insn as the
plugin_insn_append code uses this as a proxy for knowing if plugins
are enabled for the current instruction. Otherwise we can hit a race
where a previously instrumented thread leaves a stale value after the
main thread exits and disables instrumentation.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/824
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220204204335.1689602-27-alex.bennee@linaro.org>
I think these have been wrong since f193c7979c (do not depend on
thunk.h - more log items). Fix them so as not to confuse other
debugging.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220204204335.1689602-26-alex.bennee@linaro.org>
This adds simple instruction matching to the libinsn.so plugin which
is useful for examining the execution distance between instructions.
For example to track how often we flush in ARM due to TLB updates:
-plugin ./tests/plugin/libinsn.so,match=tlbi
which leads to output like this:
0xffffffc01019a918, 'tlbi vale1is, x1', 5702 hits, 31825 match hits, Δ+8112 since last match, 68859 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5703 hits, 56593 match hits, Δ+17712125 since last match, 33455 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5704 hits, 56594 match hits, Δ+12689 since last match, 33454 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5705 hits, 56595 match hits, Δ+12585 since last match, 33454 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5706 hits, 56596 match hits, Δ+10491 since last match, 33454 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5707 hits, 56597 match hits, Δ+4721 since last match, 33453 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5708 hits, 56598 match hits, Δ+10733 since last match, 33453 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5709 hits, 56599 match hits, Δ+61959 since last match, 33453 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5710 hits, 56600 match hits, Δ+55235 since last match, 33454 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5711 hits, 56601 match hits, Δ+54373 since last match, 33454 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5712 hits, 56602 match hits, Δ+2705 since last match, 33453 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5713 hits, 56603 match hits, Δ+17262 since last match, 33453 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5714 hits, 56604 match hits, Δ+17206 since last match, 33453 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5715 hits, 56605 match hits, Δ+28940 since last match, 33453 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5716 hits, 56606 match hits, Δ+7370 since last match, 33452 avg insns/match
0xffffffc01019a918, 'tlbi vale1is, x1', 5717 hits, 56607 match hits, Δ+7066 since last match, 33452 avg insns/match
showing we do some sort of TLBI invalidation every 33 thousand
instructions.
Cc: Vasilev Oleg <vasilev.oleg@huawei.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Emilio Cota <cota@braap.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220204204335.1689602-25-alex.bennee@linaro.org>
We won't go fully flexible but for most system emulation 8 vCPUs
resolution should be enough for anybody ;-)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220204204335.1689602-24-alex.bennee@linaro.org>
This patch adds the ability to generate files in drcov format. Primary
goal this script is to have coverage logfiles thatwork in Lighthouse.
Signed-off-by: Ivanov Arkady <arkadiy.ivanov@ispras.ru>
Message-Id: <163491884553.304355.13246023070235438959.stgit@pc-System-Product-Name>
[AJB: use g_ptr_array instead of slist]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220204204335.1689602-23-alex.bennee@linaro.org>
Now we have no TCG trace events and no longer handle them in the code
we can remove the handling from the tracetool to generate them. vcpu
tracing is still available although the existing syscall event is an
exercise in redundancy (plugins and -strace can also get the
information).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Luis Vilanova <vilanova@imperial.ac.uk>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220204204335.1689602-21-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Luis Vilanova <vilanova@imperial.ac.uk>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220204204335.1689602-20-alex.bennee@linaro.org>
If you really want to trace all memory operations TCG plugins gives
you a more flexible interface for doing so.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Luis Vilanova <vilanova@imperial.ac.uk>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220204204335.1689602-19-alex.bennee@linaro.org>
Users wanting this sort of functionality should turn to TCG plugins
instead.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Luis Vilanova <vilanova@imperial.ac.uk>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220204204335.1689602-18-alex.bennee@linaro.org>
Given the other failures it looks like general thread handling on sh4
is sketchy. It fails more often on CI than on my developer machine
though. See https://gitlab.com/qemu-project/qemu/-/issues/856 for more
details.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Laurent Vivier <laurent@vivier.eu>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220204204335.1689602-17-alex.bennee@linaro.org>
Support for CentOS 8 has stopped at the end of 2021, so let's
switch to the Stream variant instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220201101911.97900-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220204204335.1689602-16-alex.bennee@linaro.org>
When running "make lcitool-refresh" in an out-of-tree build, it
currently fails with an error message from git like this:
fatal: not a git repository (or any parent up to mount point /)
Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).
Fix it by changing to the source directory first before updating
the submodule.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220201085554.85733-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220204204335.1689602-15-alex.bennee@linaro.org>
Personal repos may not have release tags (v6.0.0, v6.1.0, etc) and this
causes cross_system_build_job to fail when pretty-printing a unique
qemu-setup-*.exe name:
version="$(git describe --match v[0-9]*)";
^^^^^^^^^^ fails ^^^^^^^^^^^
mv -v qemu-setup*.exe qemu-setup-${version}.exe;
Fall back to the short commit hash if necessary. This fixes CI failures
that Greg Kurz and I experienced in our personal repos.
Cc: Greg Kurz <groug@kaod.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220125173454.10381-1-stefanha@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220204204335.1689602-14-alex.bennee@linaro.org>
Ideally we should keep all our automatic formatting gubins in here.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220204204335.1689602-13-alex.bennee@linaro.org>
On Debian we also need libibumad to enable RDMA:
$ ../configure --enable-rdma
ERROR: OpenFabrics librdmacm/libibverbs/libibumad not present.
Your options:
(1) Fast: Install infiniband packages (devel) from your distro.
(2) Cleanest: Install libraries from www.openfabrics.org
(3) Also: Install softiwarp if you don't have RDMA hardware
Add the dependency to lcitool's qemu.yml (where librdmacm and
libibverbs are already listed) and refresh the generated files
by running:
$ make lcitool-refresh
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220121154134.315047-8-f4bug@amsat.org>
Message-Id: <20220204204335.1689602-12-alex.bennee@linaro.org>
lcitool doesn't support MSYS2 targets, so manually remove
this now unnecessary library.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220121154134.315047-7-f4bug@amsat.org>
Message-Id: <20220204204335.1689602-11-alex.bennee@linaro.org>
The previous commit removed all uses of libxml2.
Refresh lcitool submodule, update qemu.yml and refresh the generated
files by running:
$ make lcitool-refresh
Note: This refreshment also removes libudev dependency on Fedora
and CentOS due to libvirt-ci commit 18bfaee ("mappings: Improve
mapping for libudev"), since "The udev project has been absorbed
by the systemd project", and lttng-ust on FreeBSD runners due to
libvirt-ci commit 6dd9b6f ("guests: drop lttng-ust from FreeBSD
platform").
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220121154134.315047-6-f4bug@amsat.org>
Message-Id: <20220204204335.1689602-10-alex.bennee@linaro.org>
For a long time, we assumed that libxml2 is necessary for parallels
block format support (block/parallels*). However, this format actually
does not use libxml [*]. Since this is the only user of libxml2 in
whole QEMU tree, we can drop all libxml2 checks and dependencies too.
It is even more: --enable-parallels configure option was the only
option which was silently ignored when it's (fake) dependency
(libxml2) isn't installed.
Drop all mentions of libxml2.
[*] Actually the basis for libxml use were introduced in commit
ed279a06c5 ("configure: add dependency") but the implementation
was never merged:
https://lore.kernel.org/qemu-devel/70227bbd-a517-70e9-714f-e6e0ec431be9@openvz.org/
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220119090423.149315-1-mjt@msgid.tls.msk.ru>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[PMD: Updated description and adapted to use lcitool]
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220121154134.315047-5-f4bug@amsat.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220204204335.1689602-9-alex.bennee@linaro.org>
The script only include the local qemu.yml for Dockerfiles.
Since we want to keep the Cirrus-CI generated files in sync,
also use the --data-dir option in generate_cirrus().
Fixes: c45a540f4b (".gitlab-ci.d/cirrus: auto-generate variables with lcitool")
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220121154134.315047-4-f4bug@amsat.org>
Message-Id: <20220204204335.1689602-8-alex.bennee@linaro.org>
Correct the libvirt-ci repository URL to avoid this warning when
cloning / refreshing the submodule:
warning: redirecting to https://gitlab.com/libvirt/libvirt-ci.git/
Fixes: 4ebb040f1f ("tests: integrate lcitool for generating build env manifests")
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220121154134.315047-3-f4bug@amsat.org>
Message-Id: <20220204204335.1689602-7-alex.bennee@linaro.org>
lcitool is used by build test / automation, we want maintainers
to get notified if the submodule is updated.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220121154134.315047-2-f4bug@amsat.org>
Message-Id: <20220204204335.1689602-6-alex.bennee@linaro.org>
The gcovr tool is very messy and can leave a lot of crap in the source
tree even when using build directories.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220204204335.1689602-5-alex.bennee@linaro.org>
Left over .gcno files from old builds can really confuse gcov and the
user expects a clean slate after "make clean". Make clean mean clean.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220204204335.1689602-4-alex.bennee@linaro.org>
If this starts causing failures again we should probably fix that.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220204204335.1689602-3-alex.bennee@linaro.org>
This is no longer needed since a2ce7dbd91 ("meson: convert tests/qtest
to meson", 2020-08-21)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220204204335.1689602-2-alex.bennee@linaro.org>
This installs VOF-related binaries (the firmware and the preformatted
NVRAM) as those were left out when the VOF was submitted initially.
Fixes: fc8c745d50 ("spapr: Implement Open Firmware client interface")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20220208103751.1587902-1-aik@ozlabs.ru>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Also rstfy the documentation for AMD SEV, and link it.
The documentation for PEF had been merged into the pseries doc,
fix the reference.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220204161251.241877-1-cohuck@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
ISA v3.1 changed some VSX instructions behavior by changing what the
other words/doubleword in the result should contain when the result is
only one word/doubleword. e.g. xsmaxdp operates on doubleword 0 and
saves the result also in doubleword 0.
Before, the second doubleword result was undefined according to the
ISA, but now it's stated that it should be zeroed.
Even tough the result was undefined before, hardware implementing these
instructions already filled these fields with 0s. Changing every ISA
version in QEMU to this behavior makes the results match what happens
in hardware.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220204181944.65063-1-victor.colombo@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We don't really need to check for exception model while applying
AIL. We can check the lpcr_mask for the presence of
LPCR_AIL/LPCR_HAIL.
This removes one more instance of passing the exception model ID
around.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220207183036.1507882-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We currently abort QEMU during the dispatch of an interrupt if we try
to set MSR_HV without having MSR_HVB in the msr_mask. I think we
should verify this for all MSR bits. There is no reason to ever have a
MSR bit set if the corresponding bit is not set in that CPU's
msr_mask.
Note that this is not about the emulated code setting reserved
bits. We clear the new_msr when starting to dispatch an exception, so
if we end up with bits not present in the msr_mask that is a QEMU
programming error.
I kept the HSRR verification for BookS because it is the only CPU
family that has HSRRs.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220207183036.1507882-4-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Make the cpu-specific powerpc_excp_* functions a bit simpler by moving
the bounds check and logging to powerpc_excp.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220207183036.1507882-3-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Now that all CPU families have their own separate exception
dispatching code we can remove powerpc_excp_legacy.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220207183036.1507882-2-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 7xx CPUs don't have alternate/hypervisor Save and Restore
Registers, so we can set SRR0 and SRR1 directly.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-11-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This code applies only to the 7xx CPUs, so we can remove the switch
statement.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-10-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Thre is no HV support in the 7xx.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-9-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Remove the BookE code and add a comment explaining why we need to keep
hypercall support even though this CPU does not have a hypervisor
mode.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-8-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There's no ESR in the 7xx.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-7-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There is no MSR_HV in the 7xx so remove the LPES0 handling.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-6-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There's no MSR_HV in the 7xx.
Also remove 40x and BookE code.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Differences from the generic powerpc_excp code:
- Not BookE, so some MSR bits are cleared at interrupt dispatch;
- No MSR_HV;
- No power saving states;
- No Hypervisor Emulation Assistance;
- Not 64 bits;
- No System call vectored;
- No Alternate Interrupt Location.
Exceptions used:
POWERPC_EXCP_ALIGN
POWERPC_EXCP_DECR
POWERPC_EXCP_DLTLB
POWERPC_EXCP_DSI
POWERPC_EXCP_DSTLB
POWERPC_EXCP_EXTERNAL
POWERPC_EXCP_FPU
POWERPC_EXCP_IABR
POWERPC_EXCP_IFTLB
POWERPC_EXCP_ISI
POWERPC_EXCP_MCHECK
POWERPC_EXCP_PERFM
POWERPC_EXCP_PROGRAM
POWERPC_EXCP_RESET
POWERPC_EXCP_SMI
POWERPC_EXCP_SYSCALL
POWERPC_EXCP_THERM
POWERPC_EXCP_TRACE
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-4-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Introduce a new powerpc_excp function specific for PowerPC 7xx CPUs
(740, 745, 750, 750cl, 750cx, 750fx, 750gx, 755). This commit copies
powerpc_excp_legacy verbatim so the next one has a clean diff.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-3-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Since we've split the exception code by exception model, the exception
model IDs are becoming less useful. These two can be merged.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220204173430.1457358-2-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 6xx CPUs don't have alternate/hypervisor Save and Restore
Registers, so we can set SRR0 and SRR1 directly.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220203200957.1434641-12-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This code applies only to the 6xx CPUs, so we can remove the switch
statement.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220203200957.1434641-11-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There is no HV support in the 6xx.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220203200957.1434641-10-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There is no Hypervisor mode in the 6xx CPUs.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20220203200957.1434641-9-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>