bdrv_co_debug_event was recently introduced, with bdrv_debug_event
becoming a wrapper for use in unknown context. Because most of the
time bdrv_debug_event is used on a BdrvChild via the wrapper macro
BLKDBG_EVENT, introduce a similar macro BLKDBG_CO_EVENT that calls
bdrv_co_debug_event, and switch whenever possible.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20230601115145.196465-13-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mark functions as coroutine_fn when they are only called by other coroutine_fns
and they can suspend. Change calls to co_wrappers to use the non-wrapped
functions, which in turn requires adding GRAPH_RDLOCK annotations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20230601115145.196465-11-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When we for example have a sparse qcow2 image and discard: unmap is enabled,
there can be a lot of fragmentation in the image after some time. Especially on VM's
that do a lot of writes/deletes.
This causes the qcow2 image to grow even over 110% of its virtual size,
because the free gaps in the image get too small to allocate new
continuous clusters. So it allocates new space at the end of the image.
Disabling discard is not an option, as discard is needed to keep the
incremental backup size as low as possible. Without discard, the
incremental backups would become large, as qemu thinks it's just dirty
blocks but it doesn't know the blocks are unneeded.
So we need to avoid fragmentation but also 'empty' the unneeded blocks in
the image to have a small incremental backup.
In addition, we also want to send the discards further down the stack, so
the underlying blocks are still discarded.
Therefor we introduce a new qcow2 option "discard-no-unref".
When setting this option to true, discards will no longer have the qcow2
driver relinquish cluster allocations. Other than that, the request is
handled as normal: All clusters in range are marked as zero, and, if
pass-discard-request is true, it is passed further down the stack.
The only difference is that the now-zero clusters are preallocated
instead of being unallocated.
This will avoid fragmentation on the qcow2 image.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1621
Signed-off-by: Jean-Louis Dupond <jean-louis@dupond.be>
Message-Id: <20230605084523.34134-2-jean-louis@dupond.be>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
qcow2_open() doesn't work correctly when opening the 'file' child moves
bs to an iothread, for several reasons:
- It uses BDRV_POLL_WHILE() to wait for the qcow2_open_entry()
coroutine, which involves dropping the AioContext lock for bs when it
is not in the main context - but we don't hold it, so this crashes.
- It runs the qcow2_open_entry() coroutine in the current thread instead
of the new AioContext of bs.
- qcow2_open_entry() doesn't notify the main loop when it's done.
This patches fixes these issues around delegating work to a coroutine.
Temporarily dropping the main AioContext lock is not necessary because
we know we run in the main thread.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230525124713.401149-7-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qcow2_do_open() calls a few no_co_wrappers that wrap functions taking
the graph lock internally as a writer. Therefore, it can't hold the
reader lock across these calls, it causes deadlocks. Drop the lock
temporarily around the calls.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230510203601.418015-4-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These are functions that modify the graph, so they must be able to take
a writer lock. This is impossible if they already hold the reader lock.
If they need a reader lock for some of their operations, they should
take it internally.
Many of them go through blk_*(), which will always take the lock itself.
Direct calls of bdrv_*() need to take the reader lock. Note that while
locking for bdrv_co_*() calls is checked by TSA, this is not the case
for the mixed_coroutine_fns bdrv_*(). Holding the lock is still required
when they are called from coroutine context like here!
This effectively reverts 4ec8df0183, but adds some internal locking
instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230510203601.418015-2-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Drivers were a bit confused about whether .bdrv_open can run in a
coroutine and whether or not it holds a graph lock.
It cannot keep a graph lock from the caller across the whole function
because it both changes the graph (requires a writer lock) and does I/O
(requires a reader lock). Therefore, it should take these locks
internally as needed.
The functions used to be called in coroutine context during image
creation. This was buggy for other reasons, and as of commit 32192301,
all block drivers go through no_co_wrappers. So it is not called in
coroutine context any more.
Fix qcow2 and qed to work with the correct assumptions: The graph lock
needs to be taken internally instead of just assuming it's already
there, and the coroutine path is dead code that can be removed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-9-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These functions must not be called in coroutine context, because they
need write access to the graph.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-4-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is a bdrv_co_getlength() now, which should be used in coroutine
context.
This requires adding GRAPH_RDLOCK to some functions so that this still
compiles with TSA because bdrv_co_getlength() is GRAPH_RDLOCK.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-2-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Functions that can do I/O (including calling bdrv_is_allocated
and bdrv_block_status functions) are prime candidates for being
coroutine_fns. Make the change for those that are themselves called
only from coroutine_fns. Also annotate that they are called with the
graph rdlock taken, thus allowing them to call bdrv_co_*() functions
for I/O.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230309084456.304669-9-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_create() need to hold a reader lock for the graph.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-17-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_copy_range() need to hold a reader lock for the graph.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-15-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_pread*/pwrite*() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-12-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_driver_*() need to hold a reader lock for the graph. It doesn't add
the annotation to public functions yet.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-11-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_pwrite_zeroes() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-10-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_truncate() need to hold a reader lock for the graph.
For some places, we know that they will hold the lock, but we don't have
the GRAPH_RDLOCK annotations yet. In this case, add assume_graph_lock()
with a FIXME comment. These places will be removed once everything is
properly annotated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230203152202.49054-4-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
.bdrv_co_create implementations run in a coroutine, as does
qcow2_do_open(). Therefore they are not allowed to open images directly.
Fix the calls to use the corresponding no_co_wrappers instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230126172432.436111-7-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since these functions always run in coroutine context, adjust
their name to include "_co_", just like all other BlockDriver callbacks.
No functional change intended.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230113204212.359076-15-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_get_info() is categorized as an I/O function, and it currently
doesn't run in a coroutine. We should let it take a graph rdlock since
it traverses the block nodes graph, which however is only possible in a
coroutine.
Therefore turn it into a co_wrapper to move the actual function into a
coroutine where the lock can be taken.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230113204212.359076-11-kwolf@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have two inclusion loops:
block/block.h
-> block/block-global-state.h
-> block/block-common.h
-> block/blockjob.h
-> block/block.h
block/block.h
-> block/block-io.h
-> block/block-common.h
-> block/blockjob.h
-> block/block.h
I believe these go back to Emanuele's reorganization of the block API,
merged a few months ago in commit d7e2fe4aac.
Fortunately, breaking them is merely a matter of deleting unnecessary
includes from headers, and adding them back in places where they are
now missing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221221133551.3967339-2-armbru@redhat.com>
It is always called in coroutine_fn callbacks, therefore
it can directly call bdrv_co_create().
Rename it to bdrv_co_create_file too.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20221128142337.657646-9-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The has_FOO for pointer-valued FOO are redundant, except for arrays.
They are also a nuisance to work with. Recent commit "qapi: Start to
elide redundant has_FOO in generated C" provided the means to elide
them step by step. This is the step for qapi/block*.json.
Said commit explains the transformation in more detail.
There is one instance of the invariant violation mentioned there:
qcow2_signal_corruption() passes false, "" when node_name is an empty
string. Take care to pass NULL then.
The previous two commits cleaned up two more.
Additionally, helper bdrv_latency_histogram_stats() loses its output
parameters and returns a value instead.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Hanna Reitz <hreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221104160712.3005652-11-armbru@redhat.com>
[Fixes for #ifndef LIBRBD_SUPPORTS_ENCRYPTION and MacOS squashed in]
Signed-off-by: Alberto Faria <afaria@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221013123711.620631-20-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Alberto Faria <afaria@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221013123711.620631-10-pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Almost all drivers call bdrv_open_child() similarly. Let's create a
helper for this.
The only not updated drivers that call bdrv_open_child() to set
bs->file are raw-format and snapshot-access:
raw-format sometimes want to have filtered child but
don't set drv->is_filter to true.
snapshot-access wants only DATA | PRIMARY
Possibly we should implement drv->is_filter_func() handler, to consider
raw-format as filter when it works as filter.. But it's another story.
Note also, that we decrease assignments to bs->file in code: it helps
us restrict modifying this field in further commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220726201134.924743-3-vsementsov@yandex-team.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Callers of coroutine_fn must be coroutine_fn themselves, or the call
must be within "if (qemu_in_coroutine())". Apply coroutine_fn to
functions where this holds.
Reviewed-by: Alberto Faria <afaria@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220922084924.201610-15-pbonzini@redhat.com>
[kwolf: Fixed up coding style]
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qcow2_do_open() is used by qcow2_co_invalidate_cache(), i.e. may be run
on an image that has been opened before. When reading the backing file
string from the image header, compare it against the existing
bs->backing_file, and update bs->auto_backing_file only if they differ.
auto_backing_file should ideally contain the filename the backing BDS
will actually have after opening, i.e. a post-bdrv_refresh_filename()
version of what is in the image header. So for example, if the image
header reports the following backing file string:
json:{"driver": "qcow2", "file": {
"driver": "file", "filename": "/tmp/backing.qcow2"
}}
Then auto_backing_file should contain simply "/tmp/backing.qcow2".
Because bdrv_refresh_filename() only works on existing BDSs, though, the
way how we get this auto_backing_file value is to have the format driver
set it to whatever is in the image header, and when the backing BDS is
opened based on that, we update it with the filename the backing BDS
actually got.
However, qcow2's qcow2_co_invalidate_cache() implementation breaks this
because it just resets auto_backing_file to whatever is in the image
file without opening a BDS based on it, so we never get
auto_backing_file back to the "refreshed" version, and in the example
above, it would stay "json:{...}".
Then, bs->backing->bs->filename will differ from bs->auto_backing_file,
making bdrv_backing_overridden(bs) return true, which will lead
bdrv_refresh_filename(bs) to generate a json:{} filename for bs, even
though that may not have been necessary. This is reported in the issue
linked below.
Therefore, skip updating auto_backing_file if nothing has changed in the
image header since we last read it.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1117
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220803144446.20723-2-hreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Free feature_table if it is failed in bdrv_pread.
Signed-off-by: lu zhipeng <luzhipeng@cestc.cn>
Message-Id: <20220921144515.1166-1-luzhipeng@cestc.cn>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Swap 'buf' and 'bytes' around for consistency with
blk_co_{pread,pwrite}(), and in preparation to implement these functions
using generated_co_wrapper.
Callers were updated using this Coccinelle script:
@@ expression blk, offset, buf, bytes, flags; @@
- blk_pread(blk, offset, buf, bytes, flags)
+ blk_pread(blk, offset, bytes, buf, flags)
@@ expression blk, offset, buf, bytes, flags; @@
- blk_pwrite(blk, offset, buf, bytes, flags)
+ blk_pwrite(blk, offset, bytes, buf, flags)
It had no effect on hw/block/nand.c, presumably due to the #if, so that
file was updated manually.
Overly-long lines were then fixed by hand.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705161527.1054072-4-afaria@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Use bdrv_pwrite_sync() instead of calling bdrv_pwrite() and bdrv_flush()
separately.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220609152744.3891847-11-afaria@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Convert uses of bdrv_pwrite_sync() into bdrv_co_pwrite_sync() when the
callers are already coroutine_fn.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <v.sementsov-og@mail.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220609152744.3891847-10-afaria@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
They currently return the value of their headerlen/buflen parameter on
success. Returning 0 instead makes it clear that short reads/writes are
not possible.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220609152744.3891847-5-afaria@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
They currently return the value of their 'bytes' parameter on success.
Make them return 0 instead, for consistency with other I/O functions and
in preparation to implement them using generated_co_wrapper. This also
makes it clear that short reads/writes are not possible.
The few callers that rely on the previous behavior are adjusted
accordingly by hand.
Signed-off-by: Alberto Faria <afaria@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220609152744.3891847-4-afaria@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
qcow2_co_invalidate_cache() closes and opens the qcow2 file, by calling
qcow2_close() and qcow2_do_open(). These two functions must thus be
usable from both a global-state and an I/O context.
As they are, they are not safe to call in an I/O context, because they
use bdrv_unref_child() and bdrv_open_child() to close/open the data_file
child, respectively, both of which are global-state functions. When
used from qcow2_co_invalidate_cache(), we do not need to close/open the
data_file child, though (we do not do this for bs->file or bs->backing
either), and so we should skip it in the qcow2_co_invalidate_cache()
path.
To do so, add a parameter to qcow2_do_open() and qcow2_close() to make
them skip handling s->data_file, and have qcow2_co_invalidate_cache()
exempt it from the memset() on the BDRVQcow2State.
(Note that the QED driver similarly closes/opens the QED image by
invoking bdrv_qed_close()+bdrv_qed_do_open(), but both functions seem
safe to use in an I/O context.)
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/945
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220427114057.36651-3-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move the various memalign-related functions out of osdep.h and into
their own header, which we include only where they are used.
While we're doing this, add some brief documentation comments.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220226180723.1706285-10-peter.maydell@linaro.org
If image doesn't have any compressed cluster we can easily switch to
zlib compression, which may allow to downgrade the image.
That's mostly needed to support IMGOPTS='compression_type=zstd' in some
iotests which do qcow2 downgrade.
While being here also fix checkpatch complain against '#' in printf
formatting.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20211223160144.1097696-13-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, convert driver discard handlers bytes parameter to int64_t.
The only caller of all updated function is bdrv_co_pdiscard in
block/io.c. It is already prepared to work with 64bit requests, but
pass at most max(bs->bl.max_pdiscard, INT_MAX) to the driver.
Let's look at all updated functions:
blkdebug: all calculations are still OK, thanks to
bdrv_check_qiov_request().
both rule_check and bdrv_co_pdiscard are 64bit
blklogwrites: pass to blk_loc_writes_co_log which is 64bit
blkreplay, copy-on-read, filter-compress: pass to bdrv_co_pdiscard, OK
copy-before-write: pass to bdrv_co_pdiscard which is 64bit and to
cbw_do_copy_before_write which is 64bit
file-posix: one handler calls raw_account_discard() is 64bit and both
handlers calls raw_do_pdiscard(). Update raw_do_pdiscard, which pass
to RawPosixAIOData::aio_nbytes, which is 64bit (and calls
raw_account_discard())
gluster: somehow, third argument of glfs_discard_async is size_t.
Let's set max_pdiscard accordingly.
iscsi: iscsi_allocmap_set_invalid is 64bit,
!is_byte_request_lun_aligned is 64bit.
list.num is uint32_t. Let's clarify max_pdiscard and
pdiscard_alignment.
mirror_top: pass to bdrv_mirror_top_do_write() which is
64bit
nbd: protocol limitation. max_pdiscard is alredy set strict enough,
keep it as is for now.
nvme: buf.nlb is uint32_t and we do shift. So, add corresponding limits
to nvme_refresh_limits().
preallocate: pass to bdrv_co_pdiscard() which is 64bit.
rbd: pass to qemu_rbd_start_co() which is 64bit.
qcow2: calculations are still OK, thanks to bdrv_check_qiov_request(),
qcow2_cluster_discard() is 64bit.
raw-format: raw_adjust_offset() is 64bit, bdrv_co_pdiscard too.
throttle: pass to bdrv_co_pdiscard() which is 64bit and to
throttle_group_co_io_limits_intercept() which is 64bit as well.
test-block-iothread: bytes argument is unused
Great! Now all drivers are prepared to handle 64bit discard requests,
or else have explicit max_pdiscard limits.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210903102807.27127-11-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, convert driver write_zeroes handlers bytes parameter to int64_t.
The only caller of all updated function is bdrv_co_do_pwrite_zeroes().
bdrv_co_do_pwrite_zeroes() itself is of course OK with widening of
callee parameter type. Also, bdrv_co_do_pwrite_zeroes()'s
max_write_zeroes is limited to INT_MAX. So, updated functions all are
safe, they will not get "bytes" larger than before.
Still, let's look through all updated functions, and add assertions to
the ones which are actually unprepared to values larger than INT_MAX.
For these drivers also set explicit max_pwrite_zeroes limit.
Let's go:
blkdebug: calculations can't overflow, thanks to
bdrv_check_qiov_request() in generic layer. rule_check() and
bdrv_co_pwrite_zeroes() both have 64bit argument.
blklogwrites: pass to blk_log_writes_co_log() with 64bit argument.
blkreplay, copy-on-read, filter-compress: pass to
bdrv_co_pwrite_zeroes() which is OK
copy-before-write: Calls cbw_do_copy_before_write() and
bdrv_co_pwrite_zeroes, both have 64bit argument.
file-posix: both handler calls raw_do_pwrite_zeroes, which is updated.
In raw_do_pwrite_zeroes() calculations are OK due to
bdrv_check_qiov_request(), bytes go to RawPosixAIOData::aio_nbytes
which is uint64_t.
Check also where that uint64_t gets handed:
handle_aiocb_write_zeroes_block() passes a uint64_t[2] to
ioctl(BLKZEROOUT), handle_aiocb_write_zeroes() calls do_fallocate()
which takes off_t (and we compile to always have 64-bit off_t), as
does handle_aiocb_write_zeroes_unmap. All look safe.
gluster: bytes go to GlusterAIOCB::size which is int64_t and to
glfs_zerofill_async works with off_t.
iscsi: Aha, here we deal with iscsi_writesame16_task() that has
uint32_t num_blocks argument and iscsi_writesame16_task() has
uint16_t argument. Make comments, add assertions and clarify
max_pwrite_zeroes calculation.
iscsi_allocmap_() functions already has int64_t argument
is_byte_request_lun_aligned is simple to update, do it.
mirror_top: pass to bdrv_mirror_top_do_write which has uint64_t
argument
nbd: Aha, here we have protocol limitation, and NBDRequest::len is
uint32_t. max_pwrite_zeroes is cleanly set to 32bit value, so we are
OK for now.
nvme: Again, protocol limitation. And no inherent limit for
write-zeroes at all. But from code that calculates cdw12 it's obvious
that we do have limit and alignment. Let's clarify it. Also,
obviously the code is not prepared to handle bytes=0. Let's handle
this case too.
trace events already 64bit
preallocate: pass to handle_write() and bdrv_co_pwrite_zeroes(), both
64bit.
rbd: pass to qemu_rbd_start_co() which is 64bit.
qcow2: offset + bytes and alignment still works good (thanks to
bdrv_check_qiov_request()), so tail calculation is OK
qcow2_subcluster_zeroize() has 64bit argument, should be OK
trace events updated
qed: qed_co_request wants int nb_sectors. Also in code we have size_t
used for request length which may be 32bit. So, let's just keep
INT_MAX as a limit (aligning it down to pwrite_zeroes_alignment) and
don't care.
raw-format: Is OK. raw_adjust_offset and bdrv_co_pwrite_zeroes are both
64bit.
throttle: Both throttle_group_co_io_limits_intercept() and
bdrv_co_pwrite_zeroes() are 64bit.
vmdk: pass to vmdk_pwritev which is 64bit
quorum: pass to quorum_co_pwritev() which is 64bit
Hooray!
At this point all block drivers are prepared to support 64bit
write-zero requests, or have explicitly set max_pwrite_zeroes.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210903102807.27127-8-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: use <= rather than < in assertions relying on max_pwrite_zeroes]
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, convert driver copy_range handlers parameters which are already
64bit to signed type.
Now let's consider all callers. Simple
git grep '\->bdrv_co_copy_range'
shows the only caller:
bdrv_co_copy_range_internal(), which does bdrv_check_request32(),
so everything is OK.
Still, the functions may be called directly, not only by drv->...
Let's check:
git grep '\.bdrv_co_copy_range_\(from\|to\)\s*=' | \
awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \
while read func; do git grep "$func(" | \
grep -v "$func(BlockDriverState"; done
shows no more callers. So, we are done.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210903102807.27127-6-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, convert driver write handlers parameters which are already 64bit to
signed type.
While being here, convert also flags parameter to be BdrvRequestFlags.
Now let's consider all callers. Simple
git grep '\->bdrv_\(aio\|co\)_pwritev\(_part\)\?'
shows that's there three callers of driver function:
bdrv_driver_pwritev() and bdrv_driver_pwritev_compressed() in
block/io.c, both pass int64_t, checked by bdrv_check_qiov_request() to
be non-negative.
qcow2_save_vmstate() does bdrv_check_qiov_request().
Still, the functions may be called directly, not only by drv->...
Let's check:
git grep '\.bdrv_\(aio\|co\)_pwritev\(_part\)\?\s*=' | \
awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \
while read func; do git grep "$func(" | \
grep -v "$func(BlockDriverState"; done
shows several callers:
qcow2:
qcow2_co_truncate() write at most up to @offset, which is checked in
generic qcow2_co_truncate() by bdrv_check_request().
qcow2_co_pwritev_compressed_task() pass the request (or part of the
request) that already went through normal write path, so it should
be OK
qcow:
qcow_co_pwritev_compressed() pass int64_t, it's updated by this patch
quorum:
quorum_co_pwrite_zeroes() pass int64_t and int - OK
throttle:
throttle_co_pwritev_compressed() pass int64_t, it's updated by this
patch
vmdk:
vmdk_co_pwritev_compressed() pass int64_t, it's updated by this
patch
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210903102807.27127-5-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We are generally moving to int64_t for both offset and bytes parameters
on all io paths.
Main motivation is realization of 64-bit write_zeroes operation for
fast zeroing large disk chunks, up to the whole disk.
We chose signed type, to be consistent with off_t (which is signed) and
with possibility for signed return type (where negative value means
error).
So, convert driver read handlers parameters which are already 64bit to
signed type.
While being here, convert also flags parameter to be BdrvRequestFlags.
Now let's consider all callers. Simple
git grep '\->bdrv_\(aio\|co\)_preadv\(_part\)\?'
shows that's there three callers of driver function:
bdrv_driver_preadv() in block/io.c, passes int64_t, checked by
bdrv_check_qiov_request() to be non-negative.
qcow2_load_vmstate() does bdrv_check_qiov_request().
do_perform_cow_read() has uint64_t argument. And a lot of things in
qcow2 driver are uint64_t, so converting it is big job. But we must
not work with requests that don't satisfy bdrv_check_qiov_request(),
so let's just assert it here.
Still, the functions may be called directly, not only by drv->...
Let's check:
git grep '\.bdrv_\(aio\|co\)_preadv\(_part\)\?\s*=' | \
awk '{print $4}' | sed 's/,//' | sed 's/&//' | sort | uniq | \
while read func; do git grep "$func(" | \
grep -v "$func(BlockDriverState"; done
The only one such caller:
QEMUIOVector qiov = QEMU_IOVEC_INIT_BUF(qiov, &data, 1);
...
ret = bdrv_replace_test_co_preadv(bs, 0, 1, &qiov, 0);
in tests/unit/test-bdrv-drain.c, and it's OK obviously.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210903102807.27127-4-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: fix typos]
Signed-off-by: Eric Blake <eblake@redhat.com>
We modify the request by adding an offset to vmstate. Let's check the
modified request. It will help us to safely move .bdrv_co_preadv_part
and .bdrv_co_pwritev_part to int64_t type of offset and bytes.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210903102807.27127-3-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Add helper to parse compressed l2_entry and use it everywhere instead
of open-coding.
Note, that in most places we move to precise coffset/csize instead of
sector-aligned. Still it should work good enough for updating
refcounts.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210914122454.141075-4-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Let's pass the whole L2 entry and not bother with
L2E_COMPRESSED_OFFSET_SIZE_MASK.
It also helps further refactoring that adds generic
qcow2_parse_compressed_l2_entry() helper.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20210914122454.141075-3-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Without an external data file, s->data_file is a second pointer with the
same value as bs->file. When changing bs->file to a different BdrvChild
and freeing the old BdrvChild, s->data_file must also be updated,
otherwise it points to freed memory and causes crashes.
This problem was caught by iotests case 245.
Fixes: df2b7086f169239ebad5d150efa29c9bb6d4f820
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210708114709.206487-2-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This was deprecated back in bc5ee6da7 (qcow2: Deprecate use of
qemu-img amend to change backing file), and no one in the meantime has
given any reasons why it should be supported. Time to make change
attempts a hard error (but for convenience, specifying the _same_
backing chain is not forbidden). Update a couple of iotests to match.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210503213600.569128-2-eblake@redhat.com>
Reviewed-by: Connor Kuehl <ckuehl@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's better to use accessor function instead of bs->read_only directly.
In some places use bdrv_is_writable() instead of
checking both BDRV_O_RDWR set and BDRV_O_INACTIVE not set.
In bdrv_open_common() it's a bit strange to add one more variable, but
we are going to drop bs->read_only in the next patch, so new ro local
variable substitutes it here.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210527154056.70294-2-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Set bdi->is_dirty, so that qemu-img info could show dirty flag.
After this commit the following check will show '"dirty-flag": true':
./build/qemu-img create -f qcow2 -o lazy_refcounts=on x 1M
./build/qemu-io x
qemu-io> write 0 1M
After "write" command success, kill the qemu-io process:
kill -9 <qemu-io pid>
./build/qemu-img info --output=json x
This will show '"dirty-flag": true' among other things. (before this
commit it shows '"dirty-flag": false')
Note, that qcow2's dirty-bit is not a "dirty bit for the image". It
only protects qcow2 lazy refcounts feature. So, there are a lot of
conditions when qcow2 session may be not closed correctly, but bit is
0. Still, when bit is set, the last session is definitely not finished
correctly and it's better to report it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210504160656.462836-1-vsementsov@virtuozzo.com>
Tested-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
