Commit Graph

12 Commits

Author SHA1 Message Date
Anthony Liguori
c227f0995e Revert "Get rid of _t suffix"
In the very least, a change like this requires discussion on the list.

The naming convention is goofy and it causes a massive merge problem.  Something
like this _must_ be presented on the list first so people can provide input
and cope with it.

This reverts commit 99a0949b72.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01 16:12:16 -05:00
malc
99a0949b72 Get rid of _t suffix
Some not so obvious bits, slirp and Xen were left alone for the time
being.

Signed-off-by: malc <av1474@comtv.ru>
2009-10-01 22:45:02 +04:00
Gerd Hoffmann
3d2bf4a109 ide: split away ide-mmio.c
create ide-mmio.c and place mmio support there.
only build ide-mmio support for platforms using it.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27 20:43:33 -05:00
balrog
5c16736a37 SH4: Eliminate P4 to A7 mangling (Takashi YOSHII).
Main purpose of this is to delete
       *physical = address & 0x1fffffff;
at target-sh4/helper.c:449, using new mmio rule introduced by 
This masking is a nice trick to realize P4/A7 duality of SH registers.
But, IMHO, it is logically wrong.

Most of SH4 cpu control registers in P4 area(0xfc000000...0xffffffff) have
one more address called A7 which is usually P4 address with upper 3bits masked.
This is an address only appears in TLB's physical address part.

Current code use trick writing drivers as if they are really in A7
(that's why you see many *_A7 in hw/sh*.c), and using translation P4 to A7.

Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5935 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-07 19:39:58 +00:00
balrog
c6d86a33d3 sh4: Add IRL (4-bit encoded interrupt input) support (Takashi YOSHII).
This patch adds IRL(4bit encoded 15 level interrupt input) support
to SH using qemu_irq as a multi level (!=on/off) signal.

Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5925 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-07 18:49:57 +00:00
balrog
a4a771c055 sh4: mmio based CF support on r2d board (Takashi YOSHII).
This patch adds emulation for a CompactFlash on sh4/r2d board.
 The device is CF, but wired to be worked as True-IDE mode, and connected
 directly to SH bus. So, this code is to support generally mmio based
 IDEs which are supported by "pata_platform" driver in linux kernel.

Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5924 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-07 18:41:42 +00:00
aurel32
4e7ed2d1d3 SH4: Switch serial emulation to qemu_irq
This patches makes SH serial emulation use qemu_irq in its interface.

        * hw/sh.h (sh_serial_init): Take qemu_irq, not intc_source.
        * hw/sh7750.c (sh7750_init): Adjust.
        * hw/sh_intc.c (sh_intc_set_irq): Don't assert or deassert
        irq more than once.
        * hw/sh_serial.c (sh_serial_state): Use qemu_irq, not intc_source.
        (sh_serial_clear_fifo, sh_serial_ioport_write)
        (sh_serial_receive_byte): Adjust.
        (sh_serial_init): Take qemu_irq, not intc_source.

(Vladimir Prus)

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5769 c046a42c-6fe2-441c-8c8c-71466251a162
2008-11-21 21:06:51 +00:00
aurel32
96e2fc41a9 SH4: Use qemu_irq in timer emulation.
* hw/sh.h (tmu012_init): Accept qemu_irq, not intc_source.
        * hw/sh7750.c (sh7750_init): Pass qemu_irq to tmu012_init.
        * hw/sh_intc.c (sh_intc_set_irq): New.
        (sh_intc_init): Allocate irqs.
        * hw/sh_intc.h (struct intc_desc): New field irqs.
        * hw/sh_timer.c (sh_timer_state): Use qemu_irq, not intc_source.
        (sh_timer_update): Use qemu_set_irq, not sh_intc_toggle_source.
        (sh_timer_init, tmu012_init): Adjust.

(Vladimir Prus)

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5768 c046a42c-6fe2-441c-8c8c-71466251a162
2008-11-21 21:06:42 +00:00
blueswir1
7ccfb2eb5f Fix warnings that would be caused by gcc flag -Wwrite-strings
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5206 c046a42c-6fe2-441c-8c8c-71466251a162
2008-09-14 06:45:34 +00:00
aurel32
bf5b742308 SH4 serial controler improvements
(Shin-ichiro KAWASAKI)


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4397 c046a42c-6fe2-441c-8c8c-71466251a162
2008-05-09 18:46:04 +00:00
balrog
703243a044 Adds interrupt support to the sh specific timer code (Magnus Damm).
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3812 c046a42c-6fe2-441c-8c8c-71466251a162
2007-12-12 01:11:42 +00:00
pbrook
87ecb68bdf Break up vl.h.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3674 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-17 17:14:51 +00:00