Add tests for MSA bit set instructions. This includes following
instructions:
* BCLR.B - clear bit (bytes)
* BCLR.H - clear bit (halfwords)
* BCLR.W - clear bit (words)
* BCLR.D - clear bit (doublewords)
* BNEG.B - negate bit (bytes)
* BNEG.H - negate bit (halfwords)
* BNEG.W - negate bit (words)
* BNEG.D - negate bit (doublewords)
* BSET.B - set bit (bytes)
* BSET.H - set bit (halfwords)
* BSET.W - set bit (words)
* BSET.D - set bit (doublewords)
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1555699081-24577-5-git-send-email-aleksandar.markovic@rt-rk.com>
Add missing bits and peaces of the tests of the emulation of certain
MSA (non-immediate variants): some tests were missing two last cases;
some instructions were missing wrappers; some test included wrong
headers; some tests were missing altogether; updated some copywright
preambles; do several other minor cleanups.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1555699081-24577-4-git-send-email-aleksandar.markovic@rt-rk.com>
We currently have docker cross building targets for powerpc (32-bit, BE)
and ppc64el (64-bit, LE), but not for pcp64 (64-bit, BE). This is an
irritating gap in make check-tcg coverage so correct it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This provides the bootstrap and low level helper functions for an
alpha kernel. We use direct access to the DP264 serial port for
test output, and hard machine halt to exit the emulation.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190501184306.15208-1-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Expand the memory test to cover move of the softmmu code. Specifically
we:
- improve commentary
- add some helpers (for later BE support)
- reduce boiler plate into helpers
- add signed reads at various sizes/offsets
- required -DCHECK_UNALIGNED
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
There is nothing inherently architecture specific about the memory
test although we may have to manage different restrictions of
unaligned access across architectures.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This provides the bootstrap and low level helper functions for an
aarch64 kernel. We use semihosting to handle test output and exiting
the emulation. semihosting's parameter passing is a little funky so we
end up using the stack and pointing to that as the parameter block.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This is not really i386 only, we can have the same test for all
architectures supporting system tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We can certainly support some common tests for system emulation that
make use of our minimal defined boot.S support. It will still be up to
individual architectures to ensure they build so we provide a
MULTIARCH_TESTS variable that they can tack onto TESTS themselves.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The Exclusive Instructions provide a general-purpose mechanism for
atomic updates of memory-based synchronization variables that can be
used for exclusion algorithms.
Use cmpxchg-based implementation that is sufficient for the typical use
of exclusive access in atomic operations.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Drop test_fail: we know that exit simcall works. Now that it's not run
automatically there's no point in keeping it.
Drop test_pipeline: we're not modeling pipeline, we don't control ccount
and there's no plan to do so.
Enable test_boolean: it won't break on cores without boolean option, it
will do testing on cores with boolean option.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
break_dependency incorrectly handles the case of dependency on an opcode
that references the same register multiple times. E.g. the following
instruction is translated incorrectly:
{ or a2, a3, a3 ; or a3, a2, a2 }
This happens because resource indices of both dependency graph nodes are
incremented, and a copy for the second instance of the same register in
the ending node is not done.
Only increment resource index of the ending node of the dependency.
Add test.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Pointer authentication isn't guaranteed to always detect a clash
between different keys. Take this into account in the test by running
several times and checking the percentage hit rate of the test.
Cc: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This introduces the build framework for simple i386 system tests. The
first test is the eponymous "Hello World" which simply outputs the
text on the serial port and then exits.
I've included the framework for x86_64 but it is not in this series as
it is a work in progress.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We will likely want a few common functions to make up for the fact we
don't have a libc and we don't want to feel like we are programming by
banging rocks together.
I've purloined the printf function from:
https://git.virtualopensystems.com/dev/tcg_baremetal_tests
Although I have tweaked the names to avoid confusing GCC about clashing
with builtins.
Cc: Alexander Spyridakis <a.spyridakis@virtualopensystems.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This converts the existing Makefile into a Makefile.target and updates
it so it can be called by the tcg build system. The original Makefile
didn't set -cpu except for the v17 tests however that has broken (I
assume because linux-user is a "max" cpu) so here I force it to be
crisv17.
I've also replicated the GNU simulator targets (run-FOO-on-sim).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Bare tests are standalone assembly tests that don't require linking to
any libc and hence can be built with kernel only compilers. The libc
tests need a compiler capable of building properly linked userspace
binaries. As we don't have such a cross compiler at the moment we
won't be building those tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This is a mini library which provides helper functions to the tests
which are all currently written in assembly. A bunch of minor changes:
- removed libc related headers (fedora-cris-cross is a system compiler)
- re-organised the functions to avoid forward declarations
- cleaned up brace usage
- restored exit for _fail case
- removed tabs and fixed indentation
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Test that 32-bit instructions declared UNDEFINED in the ARMv6-M
Reference Manual really do raise an exception. Also test that the 6
32-bit instructions defined in the ARMv6-M Reference Manual do not raise
an exception.
Based-on: <20181029194519.15628-1-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20181129185113.30353-1-stefanha@redhat.com>
[AJB: integrated into system tests]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The compilation flags for proper building are in the source tree. We
also fix exit to 0 so the result is counted as a success.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
With this you can launch a test in gdb with:
cd $(BUILD)/tests
make -f $(SRC)/tests/tcg/Makefile gdb-$(TEST_NAME)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We can't rely on shell redirect magic to get things right so lets
setup a common output chardev that is expecting to write to files. As
we have split run-test up we might as well move the default monitor
bits into the call.
Finally a little make sophistry is required to correctly quote
$(COMMA) and as we don't inherit common rules we have our own little
copy here.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This will allow tests to modify the QEMU invocation with for example
different -cpu stazas without having to define a whole new set of
runner types.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Add tests for a variety of MSA integer subtract instructions.
Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1551964929-17845-6-git-send-email-mateja.marjanovic@rt-rk.com>
Add tests for a variety of MSA integer multiply instructions.
Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1551964929-17845-5-git-send-email-mateja.marjanovic@rt-rk.com>
Add tests for a variety of MSA integer dot product instructions.
Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1551964929-17845-4-git-send-email-mateja.marjanovic@rt-rk.com>
Add tests for a variety of MSA integer divide instructions.
Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1551964929-17845-3-git-send-email-mateja.marjanovic@rt-rk.com>
Add tests for a variety of MSA integer average instructions.
Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1551964929-17845-2-git-send-email-mateja.marjanovic@rt-rk.com>
Rename two header files for consistency and clarity. Do all other
changes to accommodate new names.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <amarkovic@wavecomp.com>
Message-Id: <1551981716-30664-3-git-send-email-aleksandar.markovic@rt-rk.com>
Correct preambles of test source files.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <amarkovic@wavecomp.com>
Message-Id: <1551981716-30664-2-git-send-email-aleksandar.markovic@rt-rk.com>
These are the regression tests for integer addition MSA instruction
- various flavors of instruction add (ADD, ADDS, HADD,...).
Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1551718283-4487-3-git-send-email-mateja.marjanovic@rt-rk.com>
Add tests for MSA pack instructions. This includes following
instructions:
* PCKEV.B - pack even (bytes)
* PCKEV.H - pack even (halfwords)
* PCKEV.W - pack even (words)
* PCKEV.D - pack even (doublewords)
* PCKOD.B - pack odd (bytes)
* PCKOD.H - pack odd (halfwords)
* PCKOD.W - pack odd (words)
* PCKOD.D - pack odd (doublewords)
* VSHF.B - data preserving shuffle (bytes)
* VSHF.H - data preserving shuffle (halfwords)
* VSHF.W - data preserving shuffle (words)
* VSHF.D - data preserving shuffle (doublewords)
Each test consists of 80 test cases, so altogether there are 960
test cases.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551800076-8104-15-git-send-email-aleksandar.markovic@rt-rk.com>
Add tests for MIPS64R6 integer multiply instructions: MUL, MUH, MULU,
MUHU, DMUL, DMUH, DMULU, and DMUHU.
MUH and MUHU require 64 bit inputs in the form of 64-bit sign-extended
32-bit inputs.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551800076-8104-14-git-send-email-aleksandar.markovic@rt-rk.com>
Add tests for MIPS64R6 bit count instructions: CLO, CLZ, DCLO, and DCLZ.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551800076-8104-12-git-send-email-aleksandar.markovic@rt-rk.com>
Add tests for MIPS64R6 bit swap instructions: BITSWAP and DBITSWAP.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551800076-8104-11-git-send-email-aleksandar.markovic@rt-rk.com>
Add wrappers for some MIPS64R6 instructions.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551800076-8104-9-git-send-email-aleksandar.markovic@rt-rk.com>
Add macros that will allow testing cases when one of the source
registers is identical to the destination register.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551800076-8104-8-git-send-email-aleksandar.markovic@rt-rk.com>
Add "static" and "const" modifiers where appropriate, and fix other
minor issues.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551800076-8104-7-git-send-email-aleksandar.markovic@rt-rk.com>
Add test utilities for 64-bit tests. Some of MIPS64R6 instructions
require 64-bit inputs to be 32-bit integers sign-extedned to 64 bits,
hence the need for sets of such inputs.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551800076-8104-6-git-send-email-aleksandar.markovic@rt-rk.com>
Add test utilities for 32-bit tests.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551800076-8104-5-git-send-email-aleksandar.markovic@rt-rk.com>
Add wrappers for various MSA integer instructions.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551800076-8104-4-git-send-email-aleksandar.markovic@rt-rk.com>
Make windowed register tests conditional on the presence of this option.
Fix tests to work correctly for both 32 and 64 physical registers.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Make s32c1i tests conditional on the presence of this option. Initialize
ATOMCTL SR when it's present to allow RCW transactions on uncached
memory.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
SR tests generate instructions that the assembler does not recognize and
thus must take care about configuration endianness.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Make tests for specific special registers conditional on the presence of
the options that add these registers and test that the registers are not
accessible otherwise.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Make timer/CCOUNT tests conditional on the presence of timer option and
number of configured timers. Don't use hard coded interrupt levels for
timers, use configured values.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Make interrupt tests conditional on the presence of interrupt option and
on the presence of level-1 and high level software interrupts. Don't use
hard-coded interrupt level for the high level interrupt tests, choose
high level software IRQ and use its configured level.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Make tests for optional instruction groups conditional on the presence
of corresponding options in the config.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Make data/instruction tests conditional on the presence of
data/instruction cache, whether they're lockable and whether data cache
is writeback.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Make debug tests conditional on the presence of the debug option in the
config and tests that depend on the presence/number of instruction or
data breakpoint registers on the corresponding definitions. Use
configured debug interrupt level instead of the hardcoded value to set
up IRQ handler and access debug EPC register.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Uncomment test_boolean in the test makefile. Make actual tests code
conditional on the presence of boolean option in the config.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Use bbci.l/bbsi.l instead of bbci/bbsi, as they are assembly macros that
accept little-endian bit number and produce correct immediate for both
little and big endian configurations. Choose value loaded into register
for bbc/bbs opcodes based on configuration endianness.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Don't use 'loop' opcode in generic testsuite completion code, only use
core opcodes to make it work with any configuration.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Configurations with LITBASE register may use absolute literals by
default. Pass --no-absolute-literals option to assembler to use
PC-relative literals instead.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Configurations w/o vecbase may have vectors not grouped together and not
in fixed order. They may not always be grouped into single output
sections by assigning next offset to dot, as it may sometimes move dot
backwards and sometimes they may even belong to different memory region.
Don't group vectors into single output section. Instead put each vector
into its own section ant put it at its default virtual address.
Reserve 4KBytes from the default vectors base and put rest of the code
and data starting from there. Mark vectors sections as executable,
otherwise their contents is discarded. There may be as little as 16
bytes reserved for some vectors, load handler address into a0 and use
ret.n to jump there to make vector code fit into this 16 byte space.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
When test suite with multiple tests fails it's not obvious which test
failed. Pring "failed" in every invocation of test_fail. Do printing
when DEBUG preprocessor macro is defined.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Add tests for MSA integer max/min instructions. This includes
following instructions:
* MAX_A.B - maximum of absolute of two signed values (bytes)
* MAX_A.H - maximum of absolute of two signed values (halfwords)
* MAX_A.W - maximum of absolute of two signed values (words)
* MAX_A.D - maximum of absolute of two signed values (doublewords)
* MIN_A.B - minimum of absolute of two signed values (bytes)
* MIN_A.H - minimum of absolute of two signed values (halfwords)
* MIN_A.W - minimum of absolute of two signed values (words)
* MIN_A.D - minimum of absolute of two signed values (doublewords)
* MAX_S.B - maximum of two signed values (bytes)
* MAX_S.H - maximum of two signed values (halfwords)
* MAX_S.W - maximum of two signed values (words)
* MAX_S.D - maximum of two signed values (doublewords)
* MIN_S.B - minimum of two signed values (bytes)
* MIN_S.H - minimum of two signed values (halfwords)
* MIN_S.W - minimum of two signed values (words)
* MIN_S.D - minimum of two signed values (doublewords)
* MAX_U.B - maximum of two unsigned values (bytes)
* MAX_U.H - maximum of two unsigned values (halfwords)
* MAX_U.W - maximum of two unsigned values (words)
* MAX_U.D - maximum of two unsigned values (doublewords)
* MIN_U.B - minimum of two unsigned values (bytes)
* MIN_U.H - minimum of two unsigned values (halfwords)
* MIN_U.W - minimum of two unsigned values (words)
* MIN_U.D - minimum of two unsigned values (doublewords)
Each test consists of 80 test cases, so altogether there are 1920
test cases.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551185735-17154-8-git-send-email-aleksandar.markovic@rt-rk.com>
Add tests for MSA integer compare instructions. This includes
following instructions:
* CEQ.B - integer compare equal (bytes)
* CEQ.H - integer compare equal (halfwords)
* CEQ.W - integer compare equal (words)
* CEQ.D - integer compare equal (doublewords)
* CLE_S.B - signed integer compare less or equal (bytes)
* CLE_S.H - signed integer compare less or equal (halfwords)
* CLE_S.W - signed integer compare less or equal (words)
* CLE_S.D - signed integer compare less or equal (doublewords)
* CLE_U.B - unsigned integer compare less or equal (bytes)
* CLE_U.H - unsigned integer compare less or equal (halfwords)
* CLE_U.W - unsigned integer compare less or equal (words)
* CLE_U.D - unsigned integer compare less or equal (doublewords)
* CLT_S.B - signed integer compare less or equal (bytes)
* CLT_S.H - signed integer compare less or equal (halfwords)
* CLT_S.W - signed integer compare less or equal (words)
* CLT_S.D - signed integer compare less or equal (doublewords)
* CLT_U.B - unsigned integer compare less or equal (bytes)
* CLT_U.H - unsigned integer compare less or equal (halfwords)
* CLT_U.W - unsigned integer compare less or equal (words)
* CLT_U.D - unsigned integer compare less or equal (doublewords)
Each test consists of 80 test cases, so altogether there are 1600 test
cases.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551185735-17154-2-git-send-email-aleksandar.markovic@rt-rk.com>
Add wrappers for MSA integer compare instructions.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Change directory name 'bit-counting' to 'bit-count'. This is just for
cosmetic and consistency sake. This was the only subdirectory in MSA
test directory that uses ending 'ing'.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Correct path to headers in tests/tcg/mips/user/ase/msa/bit-counting/*
source files.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Add tests for MSA logic instructions. This includes following
instructions:
* AND.V - logical AND
* NOR.V - logical NOR
* OR.V - logical OR
* XOR.V - logical XOR
Each test consists of 80 test cases, so altogether there are 320
test cases.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add wrappers for MSA logic instructions.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add tests for MSA interleave instructions. This includes following
instructions:
* ILVEV.B - interleave even (bytes)
* ILVEV.H - interleave even (halfwords)
* ILVEV.W - interleave even (words)
* ILVEV.D - interleave even (doublewords)
* ILVOD.B - interleave odd (bytes)
* ILVOD.H - interleave odd (halfwords)
* ILVOD.W - interleave odd (words)
* ILVOD.D - interleave odd (doublewords)
* ILVL.B - interleave left (bytes)
* ILVL.H - interleave left (halfwords)
* ILVL.W - interleave left (words)
* ILVL.D - interleave left (doublewords)
* ILVR.B - interleave right (bytes)
* ILVR.H - interleave right (halfwords)
* ILVR.W - interleave right (words)
* ILVR.D - interleave right (doublewords)
Each test consists of 80 test cases, so altogether there are 1280
test cases.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add wrappers for MSA interleave instructions.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add tests for MSA bit counting instructions. This includes following
instructions:
* NLOC.B - number of leading ones (bytes)
* NLOC.H - number of leading ones (halfwords)
* NLOC.W - number of leading ones (words)
* NLOC.D - number of leading ones (doublewords)
* NLZC.B - number of leading zeros (bytes)
* NLZC.H - number of leading zeros (halfwords)
* NLZC.W - number of leading zeros (words)
* NLZC.D - number of leading zeros (doublewords)
* PCNT.B - population count / number of ones (bytes)
* PCNT.H - population count / number of ones (halfwords)
* PCNT.W - population count / number of ones (words)
* PCNT.D - population count / number of ones (doublewords)
Each test consists of 80 test cases, so altogether there are 960 test
cases.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a header that contains wrappers around MSA instructions assembler
invocations. For now, only bit counting instructions (NLOC, NLZC, and
PCNT; each in four data format flavors) are supported.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add a header that contains test utilities. For now, it contains
only a function for checking and printing test results for bit
counting and similar MSA instructions.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
The file tests/tcg/mips/include/test_inputs.h is planned to
contain various test inputs. For now, it contains 64 128-bit
pattern inputs (alternating groups od ones and zeroes) and
16 128-bit random inputs.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Remove a file that was added long time ago by mistake. The commit
that introduced this file was commit d70080c4 (from 2012).
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
We can't build QEMU with this but we can use this image to build newer
arm64 testcases which need more up to date tools.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190201195404.30486-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add Makefiles for two new direcitories.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
MIPS TCG test will be organized by ISAs and ASEs in future.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Most files that have TABs only contain a handful of them. Change
them to spaces so that we don't confuse people.
disas, standard-headers, linux-headers and libdecnumber are imported
from other projects and probably should be exempted from the check.
Outside those, after this patch the following files still contain both
8-space and TAB sequences at the beginning of the line. Many of them
have a majority of TABs, or were initially committed with all tabs.
bsd-user/i386/target_syscall.h
bsd-user/x86_64/target_syscall.h
crypto/aes.c
hw/audio/fmopl.c
hw/audio/fmopl.h
hw/block/tc58128.c
hw/display/cirrus_vga.c
hw/display/xenfb.c
hw/dma/etraxfs_dma.c
hw/intc/sh_intc.c
hw/misc/mst_fpga.c
hw/net/pcnet.c
hw/sh4/sh7750.c
hw/timer/m48t59.c
hw/timer/sh_timer.c
include/crypto/aes.h
include/disas/bfd.h
include/hw/sh4/sh.h
libdecnumber/decNumber.c
linux-headers/asm-generic/unistd.h
linux-headers/linux/kvm.h
linux-user/alpha/target_syscall.h
linux-user/arm/nwfpe/double_cpdo.c
linux-user/arm/nwfpe/fpa11_cpdt.c
linux-user/arm/nwfpe/fpa11_cprt.c
linux-user/arm/nwfpe/fpa11.h
linux-user/flat.h
linux-user/flatload.c
linux-user/i386/target_syscall.h
linux-user/ppc/target_syscall.h
linux-user/sparc/target_syscall.h
linux-user/syscall.c
linux-user/syscall_defs.h
linux-user/x86_64/target_syscall.h
slirp/cksum.c
slirp/if.c
slirp/ip.h
slirp/ip_icmp.c
slirp/ip_icmp.h
slirp/ip_input.c
slirp/ip_output.c
slirp/mbuf.c
slirp/misc.c
slirp/sbuf.c
slirp/socket.c
slirp/socket.h
slirp/tcp_input.c
slirp/tcpip.h
slirp/tcp_output.c
slirp/tcp_subr.c
slirp/tcp_timer.c
slirp/tftp.c
slirp/udp.c
slirp/udp.h
target/cris/cpu.h
target/cris/mmu.c
target/cris/op_helper.c
target/sh4/helper.c
target/sh4/op_helper.c
target/sh4/translate.c
tcg/sparc/tcg-target.inc.c
tests/tcg/cris/check_addo.c
tests/tcg/cris/check_moveq.c
tests/tcg/cris/check_swap.c
tests/tcg/multiarch/test-mmap.c
ui/vnc-enc-hextile-template.h
ui/vnc-enc-zywrle.h
util/envlist.c
util/readline.c
The following have only TABs:
bsd-user/i386/target_signal.h
bsd-user/sparc64/target_signal.h
bsd-user/sparc64/target_syscall.h
bsd-user/sparc/target_signal.h
bsd-user/sparc/target_syscall.h
bsd-user/x86_64/target_signal.h
crypto/desrfb.c
hw/audio/intel-hda-defs.h
hw/core/uboot_image.h
hw/sh4/sh7750_regnames.c
hw/sh4/sh7750_regs.h
include/hw/cris/etraxfs_dma.h
linux-user/alpha/termbits.h
linux-user/arm/nwfpe/fpopcode.h
linux-user/arm/nwfpe/fpsr.h
linux-user/arm/syscall_nr.h
linux-user/arm/target_signal.h
linux-user/cris/target_signal.h
linux-user/i386/target_signal.h
linux-user/linux_loop.h
linux-user/m68k/target_signal.h
linux-user/microblaze/target_signal.h
linux-user/mips64/target_signal.h
linux-user/mips/target_signal.h
linux-user/mips/target_syscall.h
linux-user/mips/termbits.h
linux-user/ppc/target_signal.h
linux-user/sh4/target_signal.h
linux-user/sh4/termbits.h
linux-user/sparc64/target_syscall.h
linux-user/sparc/target_signal.h
linux-user/x86_64/target_signal.h
linux-user/x86_64/termbits.h
pc-bios/optionrom/optionrom.h
slirp/mbuf.h
slirp/misc.h
slirp/sbuf.h
slirp/tcp.h
slirp/tcp_timer.h
slirp/tcp_var.h
target/i386/svm.h
target/sparc/asi.h
target/xtensa/core-dc232b/xtensa-modules.inc.c
target/xtensa/core-dc233c/xtensa-modules.inc.c
target/xtensa/core-de212/core-isa.h
target/xtensa/core-de212/xtensa-modules.inc.c
target/xtensa/core-fsf/xtensa-modules.inc.c
target/xtensa/core-sample_controller/core-isa.h
target/xtensa/core-sample_controller/xtensa-modules.inc.c
target/xtensa/core-test_kc705_be/core-isa.h
target/xtensa/core-test_kc705_be/xtensa-modules.inc.c
tests/tcg/cris/check_abs.c
tests/tcg/cris/check_addc.c
tests/tcg/cris/check_addcm.c
tests/tcg/cris/check_addoq.c
tests/tcg/cris/check_bound.c
tests/tcg/cris/check_ftag.c
tests/tcg/cris/check_int64.c
tests/tcg/cris/check_lz.c
tests/tcg/cris/check_openpf5.c
tests/tcg/cris/check_sigalrm.c
tests/tcg/cris/crisutils.h
tests/tcg/cris/sys.c
tests/tcg/i386/test-i386-ssse3.c
ui/vgafont.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181213223737.11793-3-pbonzini@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are not many, and they are all simple mistakes that ended up
being committed. Remove them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181213223737.11793-2-pbonzini@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Test R5900 three-operand MADDU1.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Test R5900 three-operand MADDU.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Test R5900 three-operand MADD1.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Test R5900 three-operand MADD.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
As "xchg" reads and writes both operands, the "+m" is required to avoid
undefined behavior on -O2 compilation.
Signed-off-by: Fabrice Desclaux <fabrice.desclaux@cea.fr>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <03506cf0-a204-f619-8ee4-4990a5e69af5@cea.fr>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
