If the smartcard configure check passes, add '-I\$(SRC_PATH)/libcacard'
to QEMU_INCLUDES, not QEMU_CFLAGS. Otherwise the unexpanded SRC_PATH
will cause a warning in every following configure test.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fix compile warning in the utimensat/futimens test ("implicit
declaration of function 'utimensat'", ditto futimens) by
adding a missing include.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fix compile warning (variable 'png_ptr' set but not used) in the
PNG detection test code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The old test code raises two compiler warnings which are errors since
commit 417c9d72d4.
These errors could result in compilations with compiler flag
-march486 (so all nice features of newer processors got lost).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The distinction between QEMU_CFLAGS and CFLAGS is that the
former is for flags without which QEMU can't compile, whereas
the latter is for flags like "-g -O2" which the user can
safely override. "-march=i486" is in the former category, and
so belongs in QEMU_CFLAGS.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
"+=" does not work with dash and other simple /bin/sh implementations.
The new code prepends the flag while the old code either did not work
(it continued after an error message which typically was not read) or
appended the flag. That difference should not matter here.
Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Since commit 417c9d72d4 all configure tests
normally run with -Werror. Some of these tests now fail because they
raised a compiler warning.
This patch fixes support for capabilities.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Since commit 417c9d72d4,
all configure tests normally run with -Werror.
Some of these tests now fail because they raised a compiler warning.
Here a build breakage for ALSA (configure --audio-drv-list=alsa) is fixed.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Don't run configure tests with -Werror in the compiler flags. The idea
of -Werror is that it makes problems very obvious to developers, so
they get fixed quickly. However, when running configure tests, failures
due to -Werror are far from obvious -- they simply result in the test
quietly failing when it should have passed. Not using -Werror is in
line with recommended practice in the Autoconf world.
This commit is essentially backing out the changes in commit 417c9d72.
Instead we fix the problem that commit was trying to address in a
different way: we add -Werror only for the test of the nss headers,
with a comment that this is specifically intended to detect a bug
in some releases of nss.
We also have to clean up a bug in the smartcard test where it was
trying to include smartcard_cflags in the test compile flags: this
would always result in a failure with -Werror, because they include
an escaped "$(SRC_PATH)" which is only valid when used in the final
makefile.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Split the configure test that checks for valgrind into two, one
part checking whether we have the gcc pragma to disable unused-but-set
variables, and the other part checking for the existence of valgrind.h.
The first of these has to be compiled with -Werror and the second
does not and shouldn't generate any warnings.
This (a) allows us to enable "make errors in configure tests be
build failures" and (b) enables use of valgrind on systems with
a gcc which doesn't know about -Wunused-but-set-varibale, like
Debian squeeze.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This reverts commit 504972922d which broke the
build for ARM.
I don't think this change is necessary. If I'm wrong, please recommit this
changeset with an appropriate fix for ARM.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
[ The following text is in the "ISO-8859-1" character set. ]
[ Your display is set for the "KOI8-R" character set. ]
[ Some special characters may be displayed incorrectly. ]
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: malc <av1474@comtv.ru>
valgrind tends to get confused and report false positives when you
switch stacks and don't tell it about it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
We want all configure tests pass with -Werror if it is enabled. So we
need to update QEMU_CFLAGS early on to make sure we also pass it in to
all the compile test jobs.
This fixes a warning-became-error bug in nss for me with the default
configuration:
In file included from /usr/include/nss3/pkcs11t.h:1780,
from /usr/include/nss3/keythi.h:41,
from /usr/include/nss3/keyt.h:41,
from /usr/include/nss3/pk11pub.h:43,
from libcacard/vcard_emul_nss.c:21:
/usr/include/nss3/pkcs11n.h:365:26: error: "__GNUC_MINOR" is not defined
Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Make target_phys_addr_t 64 bits for ARM targets, and set
TARGET_PHYS_ADDR_SPACE_BITS to 40. This should have no effect for ARM
boards where physical addresses really are 32 bits (except perhaps a
slight performance hit on 32 bit hosts for system emulation) but allows
us to implement the Large Physical Address Extensions for Cortex-A15,
which mean 40 bit physical addresses.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 2624bab836 removed these
configure arguments. Now the help text for both is removed, too.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
QEMU now has a fundamental requirement for pthreads, so there
is no compelling reason to retain support for the non-threaded
VNC server. Remove the --{enable,disable}-vnc-thread configure
arguments, and all CONFIG_VNC_THREAD conditionals
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit ec5b06d (configure: ensure directory exists when creating symlinks)
moved the creation of directories into the symlink() function but forgot
the case where no symlink is created.
This leads to build errors on arm Linux due to -I../linux-headers.
Unbreak the build on arm Linux by reverting part of that commit.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* stefanha/trivial-patches:
tci: Support INDEX_op_bswap64_i64
target-i386: Use QEMU instead of Qemu
Makefile.hw: avoid overly large 'make clean' rm command
configure: Fix typo
arm_gic: Send dbg msgs to stderr not stdout
checkpatch: Add QEMU specific rule
qemu-config: Use QEMU instead of Qemu
libqtest: Fix socket_accept() to pass address_len
Makefile.user: Define CONFIG_USER_ONLY for libuser/
Makefile: Remove macro qapi-dir
Makefile: Remove BUILD_DIR from qapi-dir
Install 'bepo' keymap already included in Qemu source
Add an explicit CPUPPCState parameter instead of relying on AREG0
and rename op_helper.c (which only contains load and store helpers)
to mem_helper.c. Remove AREG0 swapping in
tlb_fill().
Switch to AREG0 free mode. Use cpu_ld{l,uw}_code in translation
and interrupt handling, cpu_{ld,st}{l,uw}_data in loads and stores.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
The typo did not cause an error because open_by_handle_at
was only compared to "yes".
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
In the next release of Xen (4.2), xs.h became deprecated.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Fedora 17's toolchain wants optimization enabled for _FORTIFY_SOURCE;
so disable _FORTIFY_SOURCE when debugging.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Some versions declare open_by_handle_at, but don't define AT_EMPTY_PATH.
Extend the check in configure to test both preconditions.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Add env parameter to every helper function that needs it, update
'configure' script.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This completes the move to nested Makefiles for virtio and a few
other files that were not part of obj-TARGET-y, but still were
compiled separately for each target.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After this patch, the libhw* directories will have a hierarchy
that mimics the source tree. This is useful because we do have
a couple of files there that are in the top source directory.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch starts converting the hw/ directory. Some files in hw/
are compiled once, some twice (32-/64-bit), some once per target.
Each category is moved in a separate patch.
After this patch, the files that are compiled once will show the
same hierarchy in the build tree as they do in the source tree,
for example hw/qdev.o instead of just qdev.o.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The core file contains register's value. These APIs write registers to
core file, and them will be called in the following patch.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Walk cpu's page table and collect all virtual address and physical address mapping.
Then, add these mapping into memory mapping list. If the guest does not use paging,
it will do nothing. Note: the I/O memory will be skipped.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Some systems may declare environ automatically, others don't. Check for it.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This new 'Qemu' was recently added.
Replace it by the official all upper case 'QEMU'.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
When auto-detecting VirtFS support, virtfs="". Set it to "no" after
checking whether it was explicitly requested through --enable-virtfs.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avoid tab-indention and fit in with the surrounding code.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* bonzini/scsi-next:
scsi: Add assertion for use-after-free errors
scsi: remove useless debug messages
scsi: set VALID bit to 0 in fixed format sense data
scsi: do not require a minimum allocation length for REQUEST SENSE
scsi: do not require a minimum allocation length for INQUIRY
scsi: parse 16-byte tape CDBs
scsi: do not report bogus overruns for commands in the 0x00-0x1F range
scsi-disk: add dpofua property
scsi: change "removable" field to host many features
scsi: Specify the xfer direction for UNMAP and ATA_PASSTHROUGH commands
scsi: fix WRITE SAME transfer length and direction
scsi: fix refcounting for reads
scsi: prevent data transfer overflow
ISCSI: Add support for thin-provisioning via discard/UNMAP and bigger LUNs
Update the configure test for libiscsi support to detect version 1.3
or later. Version 1.3 of libiscsi provides both READCAPACITY16 as well
as UNMAP commands.
Update the iscsi block layer to use READCAPACITY16 to detect the size of
the LUN instead of READCAPACITY10. This allows support for LUNs larger
than 2TB.
Update to implement bdrv_aio_discard() using the UNMAP command.
This allows us to use thin-provisioned LUNs from TGTD and other iSCSI
targets that support thin-provisioning.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
[squashed in subsequent patch from Ronnie to fix off-by-one in LBA count]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Requiring spice-server >= 0.8.2 is not enough since spice-server.pc
doesn't require spice-protocol (any version). Until that is fixed
upstream an explicit requirement in qemu fixes compilation broken since
commit 2e1a98c9c1
Author: Alon Levy <alevy@redhat.com>
Date: Fri Feb 24 23:19:30 2012 +0200
qxl: introduce QXLCookie
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* stefanha/trivial-patches:
iohandler: Use bool for boolean struct member and remove holes
async: Use bool for boolean struct members and remove a hole
configure: Fix creation of symbolic links for MinGW toolchain
The tracetool code requires Python 2.4, which was released in 2004.
Check for a supported Python version so we can give a clear error
message.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Lluís Vilanova <vilanova@ac.upc.edu>
Move socket-related Solaris libraries to $solarisnetlibs and use them
for both $LIBS and $libs_qga.
Fixes build on illumos without --disable-guest-agent.
Signed-off-by: Lee Essen <lee.essen@nowonline.co.uk>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The MinGW toolchain on w32/w64 hosts does not create symbolic links,
but implements 'ln -s' similar to 'cp -r'.
In incremental out of tree builds, this resulted in files which
were not updated when their counterparts in the QEMU source tree
changed. Especially for Makefile* this happened very often.
With this patch, the 'symlinked' files are now always updated for
out of tree builds. Similar code was already used for the symbolic
link of libcacard/Makefile.
The symlink macro always removes the target before it is created
again, therefore the rm command for libcacard/Makefile was redundant
and is removed now.
Macro symlink is also used with directories. To remove them on w32
hosts, a recursive rm is needed.
v2:
Quote arguments in shell function symlink, and also quote any argument
which is passed to symlink and which contains macros. This should reduce
the chance of accidents caused by rm -rf.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
It's been orphaned, not compiling for a long time and despite Apple's
drop of their Rosetta ppc emulation technology with Mac OS X Lion no one
has stepped up to fix it.
Testing necessary changes wrt QOM'ification thus is impossible, so we
might as well remove it completely.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
When SDL support is disabled, there is no way to build QEMU without
Cocoa support on MacOS X. This patch adds '--disable-cocoa' switch and
allows to build QEMU without both SDL and Cocoa frontends.
Signed-off-by: Pavel Borzenkov <pavel.borzenkov@gmail.com>
[AF: Adapt help output]
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Fixes the build when combined with the drop of darwin-user.
Enthusiasts can still try building it using --enable-bsd-user.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Cc: Bernhard Walle <bernhard@bwalle.de>
Tested-by: Bernhard Walle <bernhard@bwalle.de> [Mac OS 10.7.3]
Acked-by: Bernhard Walle <bernhard@bwalle.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
remove the extra pthread switch which might be there
from the package config check for gthreads.
Signed-off-by: Peter Portante <peter.portante@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This will allow the user to make Qemu use a different subdirectory name
inside $datadir and $sysconfdir, instead of "/qemu".
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Autoconf uses --datadir for the /usr/share directory, not the
program-specific subdirectory inside /usr/share. This changes configure
to match autoconf behavior.
Note that this will break compatibility with existing build scripts.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There is no code using that variable according to 'git grep', so kill
it.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
$confdir is a confusing name, as it's not clear if it's "the system
config dir" or "the Qemus-specific directory inside the config dir".
$qemu_confdir makes it more clear.
The current C code that uses CONFIG_QEMU_CONFDIR should be safe, as now
create_config generates the same #define name (CONFIG_QEMU_CONFDIR) for
both "confdir" and "qemu_confdir" variables.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Autoconf concept of "datadir" is supposed to be "$prefix/share", not
"$prefix/share/PACKAGE", so using datadir for the Qemu-specific
directory is confusing.
The current C code that uses CONFIG_QEMU_DATADIR should be safe, as now
create_config generates the same #define name (CONFIG_QEMU_DATADIR) for
both "datadir" and "qemu_datadir" variables.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There's no "confdir" variable on Autoconf, but it's good to make it
clear that it's a variable for the Qemu-specific subdirectory inside
$sysconfdir.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The autoconf "docdir" variable is used for the program-specific
subdirectory, but anyway it's better to make it clear that the variable
is used for the qemu-specific subdirectory path.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The variable is used for the qemu-specific directory and has a different
meaning of the autoconf "datadir" variable (that's used for the
$prefix/share directory, not for $prefix/share/PACKAGE).
This doesn't change behavior or interfaces, it's just an internal
variable rename.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The tracetool script is written in shell and has hit several portability
problems due to shell quirks or external tools across host platforms.
Additionally the amount of string processing and lack of real data
structures makes it tough to implement code generator backends for
tracers that are more complex.
This patch replaces the shell version of tracetool with a Python
version. The new tracetool design is:
scripts/tracetool.py - top-level script
scripts/tracetool/backend/ - tracer backends live here (simple, ust)
scripts/tracetool/format/ - output formats live here (.c, .h)
There is common code for trace-events definition parsing so that
backends can focus on generating code rather than parsing input.
Support for all existing backends (nop, stderr, simple, ust,
and dtrace) is added back in follow-up patches.
[Commit description written by Stefan Hajnoczi]
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Xen 4.2 is the first to support xc_hvm_inject_msi: use it to determine
if we are running on it.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Our Python scripts require Python 2 and will fail on Python 3, eg:
File "/home/petmay01/linaro/qemu-from-laptop/qemu/scripts/qapi-commands.py", line 378
except getopt.GetoptError, err:
^
SyntaxError: invalid syntax
Add a check to configure that Python is not a Python 3, so we can
fail with a comprehensible error rather than an obscure one.
Reported-by: Boris Matti <swiftos@lavabit.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
#abort is not a preprocessor statement. It aborts, but the preprocessor
statement #error is more common to abort a compilation.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Remove some useless uses of ARCH_CFLAGS -- this variable was never set
so will always be empty. The uses were accidental: in commit 0c439cbf8
Juan Quintela removed ARCH_CFLAGS in favour of CFLAGS (which in turn
became QEMU_CFLAGS). However in commit be17dc90 a use of it was
reintroduced (apparently accidentally) by Michael S. Tsirkin, and then
I subsequently cut-n-pasted that into a number of other configure
feature tests.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
* stefanha/trivial-patches:
make: fix clean rule by removing build file in qom/
configure: Link qga against UST tracing related libraries
configure: Link QEMU against 'liburcu-bp'
main-loop: make qemu_event_handle static
block/curl: Replace usleep by g_usleep
qtest: Add missing GCC_FMT_ATTR
w32: Undefine error constants before their redefinition
configure: fix mingw32 libs_qga typo
The official spelling is QEMU.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
These are pretty sane requirements to move forward with glib usage.
2.12 is the version found in RHEL/CentOS 5, and 2.20 is the
first version to support g_poll. Without g_poll, we cannot
integrate well with the glib main loop.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This library is needed when using 'ust/tracepoint.h'.
Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
It's typical to prepend or append parameters to an argument string so
that other places in ./configure can add parameters without clobbering
the string. In the mingw32 libs_qga case there is a typo "$lib_qga"
instead of "$libs_qga".
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Older pod2man don't have a --utf8 switch, check for this in conffigure
and use it only when present. Fixes build on RHEL-5.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Some locale settings let make fail or create wrong results
because tr '[:lower:]' '[:upper:]' which is used to convert
from lower to upper case depends on the locale.
With locale tr_TR.UTF-8, lower case 'i' is not converted to 'I'.
This results in wrong entries in config-host.h like these ones:
#define CONFIG_QEMU_PREFiX "/usr/local"
#define CONFIG_QEMU_BiNDiR "/usr/local/bin"
This problem was reported by Emre Ersin.
The same problem occurs when configure creates the target specific
files config-target.mak. They get wrong declarations:
TARGET_CRiS=y
TARGET_i386=y
TARGET_MiCROBLAZE=y
TARGET_MiPS64=y
TARGET_MiPS=y
TARGET_UNiCORE32=y
It is sufficient to restrict the conversion to the characters a-z.
Using this explicit range avoids the dependency on the locale
settings and is also shorter.
v2:
POSIX says that 'tr a-z' is unspecified outside of the POSIX
locale, so we must set LC_ALL=C to make sure that we are using
POSIX (hint from Eric Blake, thanks).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This completes the transition away from AREG0. This patch must
be last because it requires CONFIG_TCG_PASS_AREG0 set too.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Adjust generation of load and store templates so that the functions
take a parameter for CPUState instead of relying on global env.
Remove wrappers. Move remaining memory helpers to ldst_helper.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reintroduce CPUState as QOM object: It's abstract and derived directly
from TYPE_OBJECT for compatibility with the user emulators.
The identifier CPUState avoids conflicts between CPU() and the struct.
Introduce $(qom-twice-y) to build it separately for system and for user
emulators.
Prepare a virtual reset method, (re)introduce cpu_reset() as wrapper.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Reorganize usb source files. Create a new hw/usb/ directory and move
all usb source code to that place. Also make filenames a bit more
descriptive. Host adapters are prefixed with "hch-" now, usb device
emulations are prefixed with "dev-". Fixup paths Makefile and include
paths to make it compile. No code changes.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Implement guest-suspend-disk RPC for Windows. Functionally this should be
equivalent to the posix implementation.
Signed-off-by: Gal Hammer <ghammer@redhat.com>
It's possible to use sigaltstack backend with --with-coroutine=sigaltstack
v2: changed from enable/disable configure flags
Signed-off-by: Alex Barcelo <abarcelo@ac.upc.edu>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Configure tries, as a default, ucontext functions for the
coroutines. But now the user can force another backend by
--with-coroutine=BACKEND option
v2: Using --with-coroutine=BACKEND instead of enable
disable individual configure options
Signed-off-by: Alex Barcelo <abarcelo@ac.upc.edu>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
MinGW-w64 and some versions of MinGW32 don't provide libiberty.a,
so add this library only if it was found.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Use the same mechanism we use for printing the configure command
line to config-host.mak to print it to config.log. This fixes a
bug where the config.log version didn't quote arguments with spaces.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The macro offsetof is defined in stddef.h. It is conforming to
the standards C89, C99 and POSIX.1-2001 (see man page), so it
is a sufficiently old standard.
Therefore chances are very high that QEMU never needs a local
definition of this macro.
osdep.h already includes stddef.h, so this patch simply removes
the unneeded code from the files configure and osdep.h.
If we ever need the local definition again, it should be added
to compiler.h (the macro is usually provided with the compiler,
it is not OS specific).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
* it's -> its (fixed for all files)
* dont -> don't (only fixed in a line which was touched by the previous fix)
* distrub -> disturb (fixed in the same line)
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
* 'upstream' of git://qemu.weilnetz.de/qemu:
Move definition of HOST_LONG_BITS to qemu-common.h
target-xtensa: Clean includes
target-unicore32: Clean includes
target-sh4: Clean includes
target-s390x: Clean includes
target-ppc: Clean includes
target-mips: Clean includes
target-microblaze: Clean includes
target-m68k: Clean includes
target-lm32: Clean includes
target-i386: Clean includes
target-cris: Clean includes
target-arm: Clean includes
target-alpha: Clean includes
Remove macro HOST_LONG_SIZE
If compiled with CONFIG_FDT, allow user to specify a device tree file using
the -dtb argument. If the machine supports it then the dtb will be loaded
into memory and passed to the kernel on boot.
Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
[Peter Maydell: Use machine opt rather than global to pass dtb filename]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* kraxel/usb.39: (21 commits)
usb: Resolve warnings about unassigned bus on usb device creation
usb-redir: Return USB_RET_NAK when we've no data for an interrupt endpoint
usb-redir: Limit return values returned by iso packets
usb-redir: Let the usb-host know about our device filtering
usb-redir: Always clear device state on filter reject
usb-redir: Fix printing of device version
ehci: drop old stuff
usb-ehci: Handle ISO packets failing with an error other then NAK
libcacard: fix reported ATR length
usb-ccid: advertise SELF_POWERED
libcacard: link with glib for g_strndup
usb-desc: fix user trigerrable segfaults (!config)
usb-ehci: sanity-check iso xfers
usb: add tracepoint for usb packet state changes.
usb-xhci: enable packet queuing
usb-uhci: implement packet queuing
usb-uhci: process uhci_handle_td return code via switch.
usb-uhci: add UHCIQueue
usb-uhci: cleanup UHCIAsync allocation & initialization.
usb-ehci: fix reset
...
Like the related macro TCG_TARGET_LONG, HOST_LONG_BITS can be determined
by the C preprocessor. It is also not used in Makefiles.
So there is no need to calculate it in configure, and it can be defined
in qemu-common.h.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
libusbredirparser-0.3.4 adds 2 new packets which allows us to notify
the usb-host:
-about the usb device filter we have (if any), so that it knows not the even
try to redirect certain devices
-when we reject a device based on filtering (in case it tries anyways)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Without it the produced library for make libcacard.la has an unresolved
symbol.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
drop all ifdefs on SPICE_INTERFACE_QXL_MINOR >= 1 as a result,
any check for SPICE_SERVER_VERSION that is now always satisfied,
and SPICE_INTERFACE_CORE_MINOR >= 3 tests, because
0.8.2 has SPICE_INTERFACE_QXL_MINOR == 1 and
SPICE_INTERFACE_CORE_MINOR == 3.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
On some systems (notably ARM Linux) glibc provides implementations
of makecontext(), getcontext() and friends which are stubs which
always return failure. Make the configure test for makecontext()
also check for the presence of the __stub_makecontext macro which
indicates the presence of these stubs, so we can avoid trying to use
them and fall back to a different coroutine implementation instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds --{enable,disable}-debug-info switches to configure
which allows to include/exclude the '-g' switch on the gcc & ld
command lines. Not building debug info reduces ressource usage
(especially disk) alot and is quite useful for test builds.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Various stubs and #ifdefs to compile for Windows using mingw
cross-build. Still has 1 linker error due to a dependency on the
forthcoming win32 versions of the GAChannel/transport class.
Remove the OpenBSD workaround for the curses probe. This has not been
necessary for 5 releases now.
Signed-off-by: Brad Smith <brad@comstyle.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
libcacard is only used by system emulation.
Only define libcacard_libs/cflags once.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds the posibility to filter out certain devices from redirecion.
To use this pass the filter property to -device usb-redir. The filter
property takes a string consisting of filter rules, the format for a rule is:
<class>:<vendor>:<product>:<version>:<allow>
-1 can be used to allow any value for a field.
Muliple rules can be concatonated using | as a separator. Note that if
a device matches none of the passed in rules, redirecting it will not be
allowed!
Example:
-device usb-redir,filter='-1:0x0781:0x5567👎0|0x08👎-1👎1'
This example will deny the Sandisk Cruzer Blade being redirected, as it
has a usb id of 0781:5567, it will allow any other usb mass storage devices,
and it will deny any other devices (the default for devices not matching any
of the rules.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The most common use of -net tap is to connect a tap device to a bridge. This
requires the use of a script and running qemu as root in order to allocate a
tap device to pass to the script.
This model is great for portability and flexibility but it's incredibly
difficult to eliminate the need to run qemu as root. The only really viable
mechanism is to use tunctl to create a tap device, attach it to a bridge as
root, and then hand that tap device to qemu. The problem with this mechanism
is that it requires administrator intervention whenever a user wants to create
a guest.
By essentially writing a helper that implements the most common qemu-ifup
script that can be safely given cap_net_admin, we can dramatically simplify
things for non-privileged users. We still support existing -net tap options
as a mechanism for advanced users and backwards compatibility.
Currently, this is very Linux centric but there's really no reason why it
couldn't be extended for other Unixes.
A typical invocation would be similar to one of the following:
qemu linux.img -net bridge -net nic,model=virtio
qemu linux.img -net tap,helper="/usr/local/libexec/qemu-bridge-helper"
-net nic,model=virtio
qemu linux.img -netdev bridge,id=hn0
-device virtio-net-pci,netdev=hn0,id=nic1
qemu linux.img -netdev tap,helper="/usr/local/libexec/qemu-bridge-helper",id=hn0
-device virtio-net-pci,netdev=hn0,id=nic1
The default bridge that we attach to is br0. The thinking is that a distro
could preconfigure such an interface to allow out-of-the-box bridged networking.
Alternatively, if a user wants to use a different bridge, a typical invocation
would be simliar to one of the following:
qemu linux.img -net bridge,br=qemubr0 -net nic,model=virtio
qemu linux.img -net tap,helper="/usr/local/libexec/qemu-bridge-helper --br=qemubr0"
-net nic,model=virtio
qemu linux.img -netdev bridge,br=qemubr0,id=hn0
-device virtio-net-pci,netdev=hn0,id=nic1
qemu linux.img -netdev tap,helper="/usr/local/libexec/qemu-bridge-helper --br=qemubr0",id=hn0
-device virtio-net-pci,netdev=hn0,id=nic1
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Richa Marwaha <rmarwah@linux.vnet.ibm.com>
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The ideal way to use qemu-bridge-helper is to give it an fscap of using:
setcap cap_net_admin=ep qemu-bridge-helper
Unfortunately, most distros still do not have a mechanism to package files
with fscaps applied. This means they'll have to SUID the qemu-bridge-helper
binary.
To improve security, use libcap to reduce our capability set to just
cap_net_admin, then reduce privileges down to the calling user. This is
hopefully close to equivalent to fscap support from a security perspective.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Richa Marwaha <rmarwah@linux.vnet.ibm.com>
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds a helper that can be used to create a tap device attached to
a bridge device. Since this helper is minimal in what it does, it can be
given CAP_NET_ADMIN which allows qemu to avoid running as root while still
satisfying the majority of what users tend to want to do with tap devices.
The way this all works is that qemu launches this helper passing a bridge
name and the name of an inherited file descriptor. The descriptor is one
end of a socketpair() of domain sockets. This domain socket is used to
transmit a file descriptor of the opened tap device from the helper to qemu.
The helper can then exit and let qemu use the tap device.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Richa Marwaha <rmarwah@linux.vnet.ibm.com>
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Current './configure --static && make' fails for me:
LINK qemu-nbd
/usr/lib/gcc/x86_64-pc-linux-gnu/4.5.3/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lssl3
/usr/lib/gcc/x86_64-pc-linux-gnu/4.5.3/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lsmime3
/usr/lib/gcc/x86_64-pc-linux-gnu/4.5.3/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lnssutil3
/usr/lib/gcc/x86_64-pc-linux-gnu/4.5.3/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lnss3
/usr/lib/gcc/x86_64-pc-linux-gnu/4.5.3/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lplds4
/usr/lib/gcc/x86_64-pc-linux-gnu/4.5.3/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lplc4
/usr/lib/gcc/x86_64-pc-linux-gnu/4.5.3/../../../../x86_64-pc-linux-gnu/bin/ld: cannot find -lnspr4
My system does not provide static libraries for nss, so
fix autoconfiguration by link checking.
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
CC: qemu-trivial <qemu-trivial@nongnu.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Added wrapper around pkg-config to allow:
- safe options injection via ${QEMU_PKG_CONFIG_FLAGS}
- spaces in path to pkg-config
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
CC: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This class provides the main building block for QEMU Object Model and is
extensively documented in the header file. It is largely inspired by GObject.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
v1 -> v2
- remove printf() in type registration
- fix typo in comment (Paolo)
- make Interface private
- move object into a new directory and move header into include/qemu/
- don't make object.h depend on qemu-common.h
- remove Type and replace it with TypeImpl * (Paolo)
- use hash table to store types (Paolo)
- aggressively cache parent type (Paolo)
- make a type_register and use it with interfaces (Paolo)
- fix interface cast comment (Paolo)
- add a few more functions required in later series
More KVM-specific devices will come, so let's start with moving the
kvmclock into a dedicated folder.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reversing the order of the warning options and -Werror is important
when clang is used instead of gcc. It changes nothing for gcc.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
* stefanha/trivial-patches:
qemu-nbd: drop loop which can never loop
Make python mandatory
net/socket.c: Fix fd leak in net_socket_listen_init() error paths
gdbstub: Fix fd leak in gdbserver_open() error path
configure: Fix test for supported host CPU type
configure: CONFIG_QEMU_INTERP_PREFIX only for user mode
scsi virtio-blk usb-msd: Clean up device init error messages
Strip trailing '\n' from error_report()'s first argument (again)
qemu-options.hx: fix tls-channel help text
The QEMU build depends on Python so make it an explicit requirement.
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Sebastian Herbszt <herbszt@gmx.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The test for whether the host CPU is supported had several problems:
* the attempt to fall back to TCI was done as a duplicate
test, very late (so "--cpu foo" would fail early but "--cpu unicore32"
would fail late, differently, and after configure had already
printed a lot of output)
* a number of CPUs only supported as guests were included in the
list of CPUs we would accept as valid hosts, which would result
in a late compile failure on those systems rather than a
configure failure or fallback to TCI
* bailing out for an unsupported CPU happened before the main
option parsing, so "configure --help" wouldn't work
Fix these by folding the setting of ARCH into the first test for
supported host CPU, removing spurious guest-only CPU names from it,
and moving the "fall back to TCI" code earlier.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Provide root privilege access to QEMU 9p proxy filesystem using socket
communication.
Proxy helper is started by root user as:
~ # virtfs-proxy-helper -f|--fd <socket descriptor> -p|--path <path-to-share>
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
With this patch, it only takes one test (instead of four)
to detect that there is no Xen support at all.
For most build hosts, this will reduce the time configure needs.
It will also reduce noisy output in config.log.
Build hosts with Xen now need up to five (instead of up to four)
tests. They get improved diagnostics when Xen support fails.
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
warning: ‘fd’ is used uninitialized in this function
warning: ‘id’ is used uninitialized in this function
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
warning: "_GNU_SOURCE" redefined
The macro is already defined on the command line.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
warning: null argument where non-null required (argument 1)
warning: null argument where non-null required (argument 3)
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
warning: return makes integer from pointer without a cast
v2: Removed type cast.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
warning: function declaration isn’t a prototype
In function ‘foo’:
warning: old-style function definition
The function name was changed, too, to avoid an additional warning.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Fix several "warning: control reaches end of non-void function".
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Since commit 1d14ffa97e (in 2005),
QEMU applications on W32 don't use the default SDL compiler flags:
Instead of a GUI application, a console application is created.
This has disadvantages (there is always an empty console window) and
no obvious reason, so this patch removes the strange flag modification.
The SDL GUI applications still can be run from a console window
and even send stdout and stderr to that console by setting environment
variable SDL_STDIO_REDIRECT=no.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Enable build by default PIE / read-only relocation sections for the QEMU
binaries on OpenBSD amd64/i386.
Signed-off-by: Brad Smith <brad@comstyle.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
test-coroutine is listed as a libcheck test in the 'checks' variable. This
is not right because 'make check' won't run test-coroutine if libcheck
tests are not enabled (either because libcheck isn't detected or because
--disable-check-utests is passed).
Tests using the glib test framework are independent from libcheck and
afaik are always present (although having a configure switch to disable
them is probably worth it).
Untangle test-coroutine from the libcheck tests by introducing the
'test_progs' variable and using it to generate the test list used by
'make check'.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Pull the creation of the linux-headers/asm symlink out of the loop
so we don't pointlessly delete and recreate it once for each target.
Also move the setting of the includes variable up so that it is
in the same place as the other code which sets this variable.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Print a banner comment at the top of config.log identifying
when configure was run and the arguments used. This is occasionally
useful for debugging purposes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Include the name of the #define being tested for in the compiler
error produced when a check_define test is run and fails. This
appears only in the config.log, but it does make it a little easier
to debug problems by inspecting config.log.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Drop the distinction between armv4l/armv4b in the $cpu variable
(ie host cpu type) in favour of calling everything 'arm'. This
makes it the same as the ARCH setting and removes some special
casing. The only thing we were using the distinction for was to
decide which endianness to use in cross compilation; do a cpp
define check there instead.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
--*dir) option pattern precede --{en,dis}able-usb-redir) patterns in the
option analysis switch, making the latter options have no effect.
There were some --*dir that are supported by Autoconf and not by QEMU configure.
The aim was to let QEMU packagers use the rpm (or similar) macro that overrides
directories for their distribution.
Replace --*dir with exact option names.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Some toolchains don't support pie properly when tls variables are
in use. Disallow pie when such toolchains are detected.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add check for the EFD_NONBLOCK and EFD_CLOEXEC flags to the
CONFIG_EVENTFD test.
This fixes the following build failure on Fedora 9:
CC event_notifier.o
event_notifier.c: In function `event_notifier_init':
event_notifier.c:21: error: `EFD_NONBLOCK' undeclared (first use in this function)
event_notifier.c:21: error: (Each undeclared identifier is reported only once
event_notifier.c:21: error: for each function it appears in.)
event_notifier.c:21: error: `EFD_CLOEXEC' undeclared (first use in this function)
make: *** [event_notifier.o] Error 1
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Change the default on x86 Linux hosts to building PIE (position
independent executables); instead of restricting the option to
user-only targets, apply it to all targets.
In addition, set the relocation sections to read-only (relro) when
available; this reduces the attack surface by disallowing changes to
relocation tables at runtime.
While PIE reduces performance and relro increases load time, it
greatly improves security, with the potential to reduce a code
execution vulnerability to a self denial of service.
Non-x86 are not changed, as they require TCG changes; neither are
non-Linux, due to lack of test coverage.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
'sed -i' is not defined in POSIX. It doesn't work on Mac OS X the way
it's used in configure (without suffix argument). This patch implements
Peter Maydell's idea of xattr.h detection.
Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Pavel Borzenkov <pavel.borzenkov@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Modern distributions place xattr.h in /usr/include/sys, and fold
libattr.so into libc. They also don't have an ENOATTR.
Make configure detect this, and add a qemu-xattr.h file that
directs the #include to the right place.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* 'tci' of git://qemu.weilnetz.de/qemu:
tcg: Add tcg interpreter to configure / make
tcg: Add tci disassembler
tcg: Add interpreter for bytecode
tcg: Add bytecode generator for tcg interpreter
tcg: Make ARRAY_SIZE(tcg_op_defs) globally available
tcg: TCG targets may define tcg_qemu_tb_exec
Suppress confusing messages from pkg_config when probing for
'check' by sending them to /dev/null as we do with other
similar probes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* 'ppc-next' of git://repo.or.cz/qemu/agraf: (24 commits)
pseries: Add partial support for PCI
ppc: Alter CPU state to mask out TCG unimplemented instructions as appropriate
pseries: Allow writes to KVM accelerated TCE table
KVM: PPC: Override host vmx/vsx/dfp only when information known
ppc: Fix up usermode only builds
pseries: Correct vmx/dfp handling in both KVM and TCG cases
PPC: Fail configure when libfdt is not available
ppc: Avoid decrementer related kvm exits
PPC: Disable non-440 CPUs for ppcemb target
PPC: Bump qemu-system-ppc to 64-bit physical address space
pseries: Under kvm use guest cpu = host cpu by default
ppc: Add cpu defs for POWER7 revisions 2.1 and 2.3
ppc: First cut implementation of -cpu host
ppc: Remove broken partial PVR matching
pseries: Update SLOF firmware image
pseries: Add device tree properties for VMX/VSX and DFP under kvm
ppc: Generalize the kvmppc_get_clockfreq() function
Set an invalid-bits mask for each SPE instructions
pseries: Update SLOF firmware image
pseries: Use Book3S-HV TCE acceleration capabilities
...
There is a "test-coroutine" which isn't in the list.
Add it so "make check" runs it too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Create a new CHECKS variable. Put the checks there instead
of adding them to the TOOLS variable.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Probe for libcheck and build checks (if found) by default.
Can be explicitly disabled using --disable-check-utests.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
According to David Gibson for some compiler/libc combinations, open_by_handle_at
test in configure isn't quite right: because the file_handle pointer is never
dereferenced, gcc doesn't complain even if it is undefined. Change the test
as suggested by him.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
We have several targets in the PPC tree now that basically require libfdt
to function properly, namely the pseries and the e500 targets. This dependency
will rather increase than decrease in the future, so I want to make sure
that people building shiny new 1.0 actually have libfdt installed to get
rid of a few ifdefs in the code.
Warning: This patch will likely make configure fail for people who don't
select their own --target-list, but don't have libfdt development packages
installed. However, we really need this new dependency to move on.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
v1 -> v2:
- no paranthesis
- no fdt check for config_pseries
- add . in error message
Some 32-bit PPC CPUs can use up to 36 bit of physical address space.
Treat them accordingly in the qemu-system-ppc binary type.
Signed-off-by: Alexander Graf <agraf@suse.de>
This provides built-in support for iSCSI to QEMU.
This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices.
It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host.
This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at
git://github.com/sahlberg/libiscsi.git
The patch adds the driver to interface with the iscsi library.
It also updated the configure script to
* by default, probe is libiscsi is available and if so, build
qemu against libiscsi.
* --enable-libiscsi
Force a build against libiscsi. If libiscsi is not available
the build will fail.
* --disable-libiscsi
Do not link against libiscsi, even if it is available.
When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host.
You can specify devices using a iscsi url of the form :
iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun>
When using authentication, the password can optionally be set with
LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch use file system specific ioctl for getting i_generation
value. Not all file system support the ioctl. So we add an export
specific extended operation and assign right callback for the
file system that support i_generation ioctl
["M. Mohan Kumar" <mohan@in.ibm.com> we can do ioctl only for
regular files and directories on the server]
Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Also don't do glibc version check to find handle support. Instead
do handle syscall support in configure.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
We only support -M pseries when certain prerequisites are met, such
as a PPC64 guest and libfdt. To only gather these requirements in
a single place, this patch introduces a new CONFIG_PSERIES variable
that gets set when all prerequisites are met.
Signed-off-by: Alexander Graf <agraf@suse.de>
To be able to detect some ARM / HPPA based architectures such as with
OpenBSD/(armish / zaurus) or OpenBSD/hppa.
Signed-off-by: Brad Smith <brad@comstyle.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The code which tests whether gcc supports warn_unused_result was wrong.
Remove the wrong test from configure and replace it by code using
macro QEMU_GNUC_PREREQ in compiler.h.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Since qapi-generated/ is a global QEMU include path, we need to make
sure it is created before anything is compiled, so do this in the
configure phase rather than via the Makefile.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If pkg-config doesn't exist then make configure fail immediately
with a useful error message. Now that glib is a required dependency,
proceeding despite the missing pkg-config will just cause us to
fail later with a misleading message about glib not being present.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This reverts commit 46f08792bb.
This was not supposed to be applied to mainline.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This will apply libuser-specific compilation flags (like the ones added by
--enable-user-pie), but keep softmmu emulation targets "as-is".
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch removes redundant shell code and cleans it a little bit.
Shell macro compile_prog takes two arguments:
local_cflags and local ldflags.
$QEMU_CFLAGS is added automatically to the cflags, so there is no need
to pass it as an argument.
It is also unnecessary to pass -Werror twice.
$flag is a compiler warning option, so it should be in local_cflags
instead of local_ldflags.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Commit 12d4536f7d removed
configure option --enable-io-thread.
Remove help message which is now no longer valid.
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The QDict unit-tests (check-qdict) will fail when ran on a different
build directory. That's, it only works when ran on the source dir.
This happens because its data file (qdict-test-data.txt) is not
copied to the build dir. Fix it.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Allow overriding the location of Samba's smbd.
Pretty much every OS I look at has some means of
changing this path (patching) so lets just make
it easier for OS developers creating packages
and/or end users to override the location.
Signed-off-by: Brad Smith <brad@comstyle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fix install(1) usage to be compatible with OpenBSD's install(1).
When creating a directory via the -d flag the -p flag cannot be
used at the same time. Also in the context of installing QEMU it
doesn't make sense to use the -p flag anyway so use the [default]
-c flag instead.
Signed-off-by: Brad Smith <brad@comstyle.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Enabling the I/O thread by default seems like an important part of declaring
1.0. Besides allowing true SMP support with KVM, the I/O thread means that the
TCG VCPU doesn't have to multiplex itself with the I/O dispatch routines which
currently requires a (racey) signal based alarm system.
I know there have been concerns about performance. I think so far the ones that
have come up (virtio-net) are most likely due to secondary reasons like
decreased batching.
I think we ought to force enabling I/O thread early in 1.0 development and
commit to resolving any lingering issues.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Uses the generic interface provided in "trace/control.h" in order to provide
a programmatic interface as well as command line and monitor controls.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
A default implementation for backend-specific routines is provided in
"trace/default.c", which backends can override by setting "trace_default=no" in
"configure".
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Provides a more hierarchical view of the variable domain.
Also adds the CONFIG_TRACE_* variables for all backends.
[Stefan added missing 'test' in stap if statement]
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Improvements to the libtool support in QEMU. Replace hard coded
libtool in the infrastructure with $(LIBTOOL) and allow
overriding the libtool binary used via the configure
script.
Reviewed-by: Andreas F=E4rber <andreas.faerber@web.de>
Signed-off-by: Brad Smith <brad@comstyle.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch tries to cull any uneeded library dependencies from the guest
agent to improve portability across various distros. We do so by being
as explicit as possible about in-tree dependencies rather than relying
on existing *-obj-y targets, and by manually setting LIBS for the
qemu-ga target to avoid pulling in LIBS_TOOLS libraries discovered by
configure.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
OpenBSD / FreeBSD and some other OS's require the use of
cc -pthread to link threaded programs so have QEMU's
configure script check for the presence of the flag
and use it if so.
Signed-off-by: Brad Smith <brad@comstyle.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
guest_agent is not supported for mingw32, so the default value
should be 'no', not 'yes'.
This removes the dependencies to glib-2.0 and python which
makes native and cross builds for w32 much easier (no need
to get and install these extra packages).
It also avoids the problems caused by different bitfield alignment
which is required by glib-2.0.
It is still possible to set guest_agent=yes via configure option.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 1fc7bd4a86 removed the gthread and
gio dependency since qemu-ga did not require it. Coroutines require
gthread, so add it back in.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
When overriding a tool name via a shell variable, don't
tack on the cross-prefix. This specifically allows the
pkg-config command to be overridden and work where it
does not exist in some cross build environments.
Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
QAPI will require glib/python, but for now the guest agent is the only
user. For now, make these dependencies an explicit guest agent one, and
give users the option to disable it if need be.
Once QAPI is adopted in core QEMU code, we would basically revert this
patch.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The system emulation code was not merged before the branch.
Let's leave that work for the next release.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
With vhost_net="" (most non-Linux hosts), configure prints an
error message:
test: 2551: =: unexpected operator
Fix this and similar code by adding the missing "".
Cc: Wolfgang Mauerer <wolfgang.mauerer@siemens.com>
Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fix configure display for non-Linux OS's and the KVM /
vhost-net features to show "no" output instead of nothing
at the end of the line.
Signed-off-by: Brad Smith <brad@comstyle.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
On platforms that don't support makecontext(3) use gthread based
coroutine implementation.
Darwin has makecontext(3) but getcontext(3) is stubbed out to return
ENOTSUP. Andreas Färber <andreas.faerber@web.de> debugged this and
contributed the ./configure test which solves the issue for Darwin/ppc64
(and ppc) v10.5.
[Original patch by Aneesh, made consistent with coroutine-ucontext.c and
switched to GStaticPrivate by Stefan. Tested on Linux and OpenBSD.]
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This is required for building libcacard which doesn't itself require
zlib without bringing in this requirement to the build environment.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is just code movement, and moving the fpu/ include path from
target-dependent to target-independent Make variables.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
vhost.c uses __sync_fetch_and_and(), which is only
available for -march=i486 and above (see
https://bugzilla.redhat.com/show_bug.cgi?id=624279).
Signed-off-by: Wolfgang Mauerer <wolfgang.mauerer@siemens.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
When using xen_enabled() we're currently only checking if xen is enabled
at all during the build. But what if you want to build multiple targets
out of which only one can potentially run xen code?
That means that for generic code we'll still have to fall back to the
variable and potentially slow the code down, but it's not as important as
that is mostly xen device emulation which is not touched for non-xen targets.
The target specific code however can with this patch see that it's unable to
ever execute xen code. We can thus always return 0 on xen_enabled(), giving
gcc enough hints to evict the mapcache code from the target memory management
code.
Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Add configure check for python, exit if not found. Add switches
for specifying the path to python, use the path in Makefile.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
As far as I can tell, there isn't a dependency on gthread. Also, the only use
of gio was to enable GSocket to accept a unix domain socket.
Since GSocket isn't available on OpenSuSE 11.1, let's just remove that
dependency.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds support for a usb-redir device, which takes a chardev
as a communication channel to an actual usbdevice using the usbredir protocol.
Compiling the usb-redir device requires usbredir-0.3 to be installed for
the usbredir protocol parser, usbredir-0.3 also contains a server for
redirecting usb traffic from an actual usb device. You can get the 0.3
release of usbredir here:
http://people.fedoraproject.org/~jwrdegoede/usbredir-0.3.tar.bz2
(getting a more formal site for it is a WIP)
Example usage:
1) Start usbredirserver for a usb device:
sudo usbredirserver 045e:0772
2) Start qemu with usb2 support + a chardev talking to usbredirserver +
a usb-redir device using this chardev:
qemu ... \
-readconfig docs/ich9-ehci-uhci.cfg \
-chardev socket,id=usbredirchardev,host=localhost,port=4000 \
-device usb-redir,chardev=usbredirchardev,id=usbredirdev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This is the actual guest daemon, it listens for requests over a
virtio-serial/isa-serial/unix socket channel and routes them through
to dispatch routines, and writes the results back to the channel in
a manner similar to QMP.
A shorthand invocation:
qemu-ga -d
Is equivalent to:
qemu-ga -m virtio-serial -p /dev/virtio-ports/org.qemu.guest_agent.0 \
-f /var/run/qemu-ga.pid -d
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
Base definitions/includes for Visiter interface used by generated
visiter/marshalling code.
Includes a GenericList type. Our lists require an embedded element.
Since these types are generated, if you want to use them in a different
type of data structure, there's no easy way to add another embedded
element. The solution is to have non-embedded lists and that what this is.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
GLib is an extremely common library that has a portable thread implementation
along with tons of other goodies.
GLib and GObject have a fantastic amount of infrastructure we can leverage in
QEMU including an object oriented programming infrastructure.
Short term, it has a very nice thread pool implementation that we could leverage
in something like virtio-9p. It also has a test harness implementation that
this series will use.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
Introduce CONFIG_XEN_BACKEND so that this new config solely controls the
target-independent backend build and CONFIG_XEN can focus on per-target
building.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This is an all-in-one fix for the smaller and bigger mistakes of the
build system changes for accompanied Linux headers:
- only enable KVM and vhost on Linux hosts
- fix powerpc asm header symlink
- do not use Linux headers on non-Linux hosts
- fix kvmclock for !CONFIG_KVM
- fix s390 build on non-Linux hosts
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Tested-by: Andreas Färber <andreas.faerber@web.de>
Tested-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
pulse/simple.h does not include stdlib.h
We cannot use NULL since it may not be defined
Use 0 instead
Signed-off-by: Marc-Antoine Perennou <Marc-Antoine@Perennou.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
When we create the symlinks to source tree files, don't create them
if the file is not actually present in the source tree; this will
happen if the file is in a git submodule that wasn't checked out.
This also avoids the odd effect where an in-source-tree configure
will end up creating the missing file as a symlink to itself.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Required header support is now unconditionally available.
CC: Alexander Graf <agraf@suse.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This helps reducing our build-time checks for feature support in the
available Linux kernel headers. And it helps users that do not have
sufficiently recent headers installed on their build machine.
Consequently, the patch removes and build-time checks for kvm and vhost
in configure, the --kerneldir switch, and KVM_CFLAGS. Kernel headers are
supposed to be provided by QEMU only.
s390 needs some extra love as it carries redefinitions from kernel
headers.
CC: Alexander Graf <agraf@suse.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This function will be used to support sync dirty bitmap.
This come with a check against every Xen release, and special
implementation for Xen version that doesn't have this specific call.
This function will not be usable with Xen 3.3 because the behavior is
different.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
BeOS and Haiku on i386 use long for 32-bit types, including pid_t.
Using %d with pid_t therefore results in a warning.
Unfortunately POSIX:2008 does not define a PRId* string for pid_t.
In some places pid_t was previously casted to long and %ld hardcoded.
The predecessor of this patch added another upcast for the simpletrace
filename but was not applied to date.
Since new uses of pid_t with %d keep creeping in, let's instead define
an OS-dependent format string and use that consistently.
Cc: Stefan Hajnoczi <stefanha@gmail.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Ingo Weinhold <ingo_weinhold@gmx.de>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* 'cocoa-for-upstream' of git://repo.or.cz/qemu/afaerber:
Darwin: Fix compilation warning regarding the deprecated daemon() function
cocoa: Avoid warning related to multiple handleEvent: definitions
cocoa: Revert dependency on VNC
cocoa: Provide central qemu_main() prototype
Fix libfdt warnings on Darwin
configure: Fix check for fdatasync()
Remove warning in printf due to type mismatch
Cocoa: avoid displaying window when command-line contains '-h' or '-help'
Fix compilation warning due to incorrectly specified type
cocoa: do not create a spurious window for -version
No flag to configure is required. Instead, added a libcacard.la target that
is not built by default, only when requested explicitly via:
mkdir build
cd build
../configure
make libcacard.la
make install-libcacard
Uses libtool to do actual linking of object files and shared library, and
installing. Tested only under linux, but supposed to work on other systems as
well.
If libtool isn't found you get a message complaining about that, only at build
time (since it is not a default target I did not add a message at configure
time).
New build artifacts:
.libs subdirectories (at <buildroot> and <buildroot>/libcacard)
*.lo files (at same locations as the respective o files)
Added %.lo : %.c rule that uses libtool.
Updated clean rule to clean up those artifacts.
Added specific rule to call dtrace with libtool wrapper (note that because of
a current upstream dtrace bug fixed by systemtap b1568fd85 commit the -fPIC flag
isn't actually passed on. still current dtrace+libtool produced object links fine).
If libtool is missing any of the following targets will complain and exit 1:
any subdir: *.lo
root and libcacard: libcacard.la, libcacard-instsall
Tested to link and load with all tracing backends.
Under Darwin, a symbol exists for the fdatasync() function, so that our
link test succeeds. However _POSIX_SYNCHRONIZED_IO is set to '-1'.
According to POSIX:2008, a value of -1 means the feature is not supported.
A value of 0 means supported at compilation time, and a value greater 0
means supported at both compilation and run time.
Enable fdatasync() only if _POSIX_SYNCHRONIZED_IO is '>0'.
Signed-off-by: Alexandre Raymond <cerbere@gmail.com>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Older versions of libcurl don't have some of the features we try to
use, in particular curl_multi_setopt(). Check for this in the 'is
libcurl available?' configure test so we disable curl support if the
library is too old.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
* rth/axp-next: (26 commits)
target-alpha: Implement TLB flush primitives.
target-alpha: Use a fixed frequency for the RPCC in system mode.
target-alpha: Trap for unassigned and unaligned addresses.
target-alpha: Remap PIO space for 43-bit KSEG for EV6.
target-alpha: Implement cpu_alpha_handle_mmu_fault for system mode.
target-alpha: Implement more CALL_PAL values inline.
target-alpha: Disable interrupts properly.
target-alpha: All ISA checks to use TB->FLAGS.
target-alpha: Swap shadow registers moving to/from PALmode.
target-alpha: Implement do_interrupt for system mode.
target-alpha: Add IPRs to be used by the emulation PALcode.
target-alpha: Use kernel mmu_idx for pal_mode.
target-alpha: Add various symbolic constants.
target-alpha: Use do_restore_state for arithmetic exceptions.
target-alpha: Tidy up arithmetic exceptions.
target-alpha: Tidy exception constants.
target-alpha: Enable the alpha-softmmu target.
target-alpha: Rationalize internal processor registers.
target-alpha: Merge HW_REI and HW_RET implementations.
target-alpha: Cleanup MMU modes.
...
librbd stacks on top of librados to provide access
to rbd images.
Using librbd simplifies the qemu code, and allows
qemu to use new versions of the rbd format
with few (if any) changes.
Reviewed-by: Christian Brunner <chb@muc.de>
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch raises the minimum required spice version to 0.6.0 and drops
a few ifdefs.
0.6.0 is the first stable release with the current libspice-server API,
there shouldn't be any 0.5.x development versions deployed any more.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Older gcc compilers do not support -Wendif-labels, so move it from the
hardcoded list to the dynamically detected list.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Remove softfloat-native support, all targets are now using softfloat
instead.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
With all of the pre-existing code that would not compile gone,
this is the earliest point at which the target can be enabled.
There is no machine defined yet, so this will crash on startup.
Enable the target anyway, to make sure that further compilation
problems do not creep back in.
Signed-off-by: Richard Henderson <rth@twiddle.net>
The --disable-slirp option was undocumented; add it to configure's
--help output.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Include the list of available targets in the --help output
for the --target-list= option.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
* 'ppc-next' of git://repo.or.cz/qemu/agraf:
PPC: Qdev'ify e500 pci
PPC MPC7544DS: Use new TLB helper function
PPC: Implement e500 (FSL) MMU
PPC: Add another 64 bits to instruction feature mask
PPC: Add GS MSR definition
PPC: Make MPC8544DS emulation work w/o KVM
PPC: Make MPC8544DS obey -cpu switch
Fix off-by-one error in sizing pSeries hcall table
ppc64: Fix out-of-tree builds
kvm: ppc: warn user on PAGE_SIZE mismatch
kvm: ppc: detect old headers
monitor: add PPC BookE SPRs
kvm: ppc: fixes for KVM_SET_SREGS on init
ppc64: Don't try to build sPAPR RTAS on Darwin
Place pseries vty devices at addresses more similar to existing machines
Make pSeries 'model' property more closely resemble real hardware
pseries: Increase maximum CPUs to 256
On ppc64 host, recursion into pc-bios/spapr-rtas/ fails for
out-of-tree builds. Add missing dir and symlink.
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
When compiling Qemu with older kernel headers, the PVR setting
mechanism isn't available yet. Unfortunately, back then I didn't add
a capability we could check against, so all we can do is add a configure
test to see if we support PVR setting. For BookE, we don't care yet.
This fixes compilation errors with KVM enabled on older kernel headers
(like 2.6.32).
Signed-off-by: Alexander Graf <agraf@suse.de>
The Darwin assembler fails to build it.
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
With MapCache, we can handle a 64b target, even with a 32b host/qemu.
So, we need to have target_phys_addr_t to 64bits.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
On IA32 host or IA32 PAE host, at present, generally, we can't create
an HVM guest with more than 2G memory, because generally it's almost
impossible for Qemu to find a large enough and consecutive virtual
address space to map an HVM guest's whole physical address space.
The attached patch fixes this issue using dynamic mapping based on
little blocks of memory.
Each call to qemu_get_ram_ptr makes a call to qemu_map_cache with the
lock option, so mapcache will not unmap these ram_ptr.
Blocks that do not belong to the RAM, but usually to a device ROM or to
a framebuffer, are handled in a separate function. So the whole RAMBlock
can be map.
Signed-off-by: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch updates the libxenctrl calls in Qemu to use the new interface,
otherwise Qemu wouldn't be able to build against new versions of the
library.
We check libxenctrl version in configure, from Xen 3.3.0 to Xen
unstable.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that we start adding more files related to 9pfs
it make sense to move them to a separate directory
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Because the opengl library is only linked to for the lm32 target, we can
now safely enable opengl by default again.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This patch is the first attempt to make configure more intelligent with
regard to how it links to libraries. It divides the softmmu libraries into
two lists, a general one and a list which depends on the target
architecture.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Work around a SPARC glibc bug which caused the epoll_create1 configure
test to wrongly claim that the function was present. Some versions of
SPARC glibc provided the function in the library but didn't declare
it in the include file; the result is that gcc warns about an implicit
declaration but a link succeeds. So we reference the function as a
value rather than a function call to induce a compile time error
if the declaration was not present.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This increase the correctness (precision, NaN values, corner cases) on
non-x86 machines, and add the possibility to handle the exception
correctly.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
There is a bug in nvidia's binary GPU driver, which causes a segmentation
fault if linked to libGL.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The alignment for longs on s390x is 8. That's the only place where it differs
from the default alignments found in configure already. The example alignment
program from Laurent printed the following on a real s390x:
alignof(short) 2
alignof(int) 4
alignof(long) 8
alignof(long long) 8
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
basename prints a missing-argument error when sdlconfig is empty
and we're cross-compiling.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Standard autoconf scripts include a --version flag so people can easily
query things. Add this to qemu's configure so it too can integrate with
build systems that have standard autotool helpers.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch introduce a new config option CONFIG_OPENGL.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for the Milkymist AC97 compatible sound output and
input core.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
S390x user emulation can do nptl. Reflect this in the configure script.
Signed-off-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
libcacard emulates a Common Access Card (CAC) which is a standard
for smartcards. It is used by the emulated ccid card introduced in
a following patch. Docs are available in docs/libcacard.txt
Signed-off-by: Alon Levy <alevy@redhat.com>
---
changes from v24->v25:
* Fix out of tree builds.
* Fix build with linux-user targets.
changes from v23->v24: (Jes Sorensen review 2)
* Makefile.target: use obj-$(CONFIG_*) +=
* remove unrequired includes, include qemu-common before qemu-thread
* required adding #define NO_NSPR_10_SUPPORT (harmless)
changes from v22->v23:
* configure fixes: (reported by Stefan Hajnoczi)
* test a = b, not a == b (second isn't portable)
* quote $source_path in case it contains spaces
- this doesn't really help since there are many other places
that need similar fixes, not introduced by this patch.
changes from v21->v22:
* fix configure to not link libcacard if nss not found
(reported by Stefan Hajnoczi)
* fix vscclient linkage with simpletrace backend
(reported by Stefan Hajnoczi)
* card_7816.c: add missing break in ERROR_DATA_NOT_FOUND
(reported by William van de Velde)
changes from v20->v21: (Jes Sorensen review)
* use qemu infrastructure: qemu-thread, qemu-common (qemu_malloc
and qemu_free), error_report
* assert instead of ASSERT
* cosmetic fixes
* use strpbrk and isspace
* add --disable-nss --enable-nss here, instead of in the final patch.
* split vscclient, passthru and docs to following patches.
changes from v19->v20:
* checkpatch.pl
changes from v15->v16:
Build:
* don't erase self with distclean
* fix make clean after make distclean
* Makefile: make vscclient link quiet
Behavioral:
* vcard_emul_nss: load coolkey in more situations
* vscclient:
* use hton,ntoh
* send init on connect, only start vevent thread on response
* read payload after header check, before type switch
* remove Reconnect
* update for vscard_common changes, empty Flush implementation
Style/Whitespace:
* fix wrong variable usage
* remove unused variable
* use only C style comments
* add copyright header
* fix tabulation
Signed-off-by: Alon Levy <alevy@redhat.com>
libcacard: fix out of tree builds
A CCID device is a smart card reader. It is a USB device, defined at [1].
This patch introduces the usb-ccid device that is a ccid bus. Next patches will
introduce two card types to use it, a passthru card and an emulated card.
[1] http://www.usb.org/developers/devclass_docs/DWG_Smart-Card_CCID_Rev110.
Signed-off-by: Alon Levy <alevy@redhat.com>
---
changes from v20->v21: (Jes Sorenson review)
* cosmetic changes - fix multi line comments.
* reorder fields in USBCCIDState
* add reference to COPYING
* add --enable-smartcard and --disable-smartcard here (moved
from last patch)
changes from v19->v20:
* checkpatch.pl
changes from v18->v19:
* merged: ccid.h: add copyright, fix define and remove non C89 comments
* add qdev.desc
changes from v15->v16:
Behavioral changes:
* fix abort on client answer after card remove
* enable migration
* remove side affect code from asserts
* return consistent self-powered state
* mask out reserved bits in ccid_set_parameters
* add missing abRFU in SetParameters (no affect on linux guest)
whitefixes / comments / consts defines:
* remove stale comment
* remove ccid_print_pending_answers if no DEBUG_CCID
* replace printf's with DPRINTF, remove DEBUG_CCID, add verbosity defines
* use error_report
* update copyright (most of the code is not original)
* reword known bug comment
* add missing closing quote in comment
* add missing whitespace on one line
* s/CCID_SetParameter/CCID_SetParameters/
* add comments
* use define for max packet size
Comment for "return consistent self-powered state":
the Configuration Descriptor bmAttributes claims we are self powered,
but we were returning not self powered to USB_REQ_GET_STATUS control message.
In practice, this message is not sent by a linux 2.6.35.10-74.fc14.x86_64
guest (not tested on other guests), unless you issue lsusb -v as root (for
example).
On pSeries machines, operating systems can instantiate "RTAS" (Run-Time
Abstraction Services), a runtime component of the firmware which implements
a number of low-level, infrequently used operations. On logical partitions
under a hypervisor, many of the RTAS functions require hypervisor
privilege. For simplicity, therefore, hypervisor systems typically
implement the in-partition RTAS as just a tiny wrapper around a hypercall
which actually implements the various RTAS functions.
This patch implements such a hypercall based RTAS for our emulated pSeries
machine. A tiny in-partition "firmware" calls a new hypercall, which
looks up available RTAS services in a table.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
rbd support tries to both link with -lrados and -lcrypto. While the
first one is of course necessary, the second is not necessary (only
librados ifself needs to link with libcrypto).
This fixes a licensing issue: qemu as a whole is GPL v2, and thus can't
be linked with OpenSSL without an exception in the license, which seems
difficult to get given the number of persons involved.
Cc: Christian Brunner <chb@muc.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
MinGW optionally includes pdcurses, so add support for it.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
libiberty.a is part of MinGW and provides useful functions
like ffs (MinGW) and getopt (MinGW-w64).
It is needed for w64 compilations and allows simpler code for w32.
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
qemu i386 used to support more than 4GB of RAM through PAE, but it has
been disabled for an unknown reason. Reenable it.
Note that simply running qemu x86_64 and emulating a 32-bit CPU is not
a solution to this problem as it is about 15% slower (it needs to
emulate 64 bit registers even if half of them are not used). On the
other hand, I haven't seen any measurable impact by switching
target_phys_bits to 64.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Support the epoll family of syscalls: epoll_create(), epoll_create1(),
epoll_ctl(), epoll_wait() and epoll_pwait(). Note that epoll_create1()
and epoll_pwait() are later additions, so we have to test separately
in configure for their presence.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Found by Stefan Hajnoczi: There is a race in kvm_cpu_exec between
checking for exit_request on vcpu entry and timer signals arriving
before KVM starts to catch them. Plug it by blocking both timer related
signals also on !CONFIG_IOTHREAD and process those via signalfd.
As this fix depends on real signalfd support (otherwise the timer
signals only kick the compat helper thread, and the main thread hangs),
we need to detect the invalid constellation and abort configure.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
CC: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>