Affects documentation and a few error messages.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-2-armbru@redhat.com>
In order to test that the NBD server is properly advertising
dirty bitmaps, we need a bare minimum client that can request
and read the context. Since feature freeze for 3.0 is imminent,
this is the smallest workable patch, which replaces the qemu
block status report with the results of the NBD server's dirty
bitmap (making it very easy to use 'qemu-img map --output=json'
to learn where the dirty portions are). Note that the NBD
protocol defines a dirty section with the same bit but opposite
sense that normal "base:allocation" uses to report an allocated
section; so in qemu-img map output, "data":true corresponds to
clean, "data":false corresponds to dirty.
A more complete solution that allows dirty bitmaps to be queried
at the same time as normal block status will be required before
this addition can lose the x- prefix. Until then, the fact that
this replaces normal status with dirty status means actions
like 'qemu-img convert' will likely misbehave due to treating
dirty regions of the file as if they are unallocated.
The next patch adds an iotest to exercise this new code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180702191458.28741-2-eblake@redhat.com>
Commit 51f63ec7d tried to change all references to 2.13 into 3.0, but
it failed to achieve this because it was not properly rebased on top of
the series introducing qapi/job.json. Change the references now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This patch adds Windows crashdumping feature. Now QEMU can produce ELF-dump
containing Windows crashdump header, which can help to convert to a valid
WinDbg-understandable crashdump file, or immediately create such file.
The crashdump will be obtained by joining physical memory dump and 8K header
exposed through vmcoreinfo/fw_cfg device by guest driver at BSOD time. Option
'-w' was added to dump-guest-memory command. At the moment, only x64
configuration is supported.
Suitable driver can be found at
https://github.com/virtio-win/kvm-guest-drivers-windows/tree/master/fwcfg64
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180517162342.4330-2-viktor.prutyanov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let management know if there were any problems communicating with
qemu-pr-helper. The event is edge-triggered, and is sent every time
the connection status of the pr-manager-helper object changes.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will include how many bytes they are sent through multifd.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Only one existing trace event uses a floating point type. Unfortunately
float and double cannot be supported since SystemTap does not have
floating point types.
Remove float and double from the whitelist and document this limitation.
Update the migrate_transferred trace event to use uint64_t instead of
double.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 20180621150254.4922-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Flat unions may now have uncovered branches, so it is possible to get rid
of empty types defined for that purpose only.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1529311206-76847-3-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Minor fixes and reenable preconfig
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJbK9WdAAoJEAUWMx68W/3njg0P/0qdP1TctuwwikSbRuEPLVCa
nwqfsEMomiukC9wD4DR4opsupY+e5Ugeje+TTK8oF+CzamD70XXtLoeR2JSXEon2
ZlN3MxOv/4ibP3f5pjgJc0skzhD3y/FAD3qzBkaaHwsudBSjZ7rlOGS3E5U3tOxy
JLKrotjV9W6qtwO6DNKE7+DcnJPbb6zNtKjt00BuYghVn8K5zXyTKOsxK6QLH9b3
txdeVmqMnIhpFavLESMOgE3HicTATLJsRREqmnZz+fPPP0Yiz/2tyLXEV64v9BLu
G99/FeqtLVvxyeKCAn/dWbbLqrsAV7pgnyaQfE55EzjpSO2xl8hayNUUqbgqsNwW
nKSQO0P2iFU1zQTHs5hJyBaqjdlOOsPdM6tO9UywSERiyAlxosVr0K+gFYVcQi56
2BelxNeAvqIDrWPPvaSLZhNXGUxpk3LwSzS9Ma5KqHFb+MaW++hZhkVy4exRm+NN
OIk+Em5QCBMp0AoNaVsf+qGpy0wkfUDB4OVycDscr1dRx5uKmgMl6qDh1nwg3a73
527ui0+qpI2/3zLlG6ohazGiVLwio005MJkYG2dAvobwZC0p5MnbFkjPML444EDj
3QAFzzUHJkFusmsNl1Jkgf1Uh1mXCwovE6fU/fa/I0HxS/M7lJob0NLRMctL60Q7
O9R6jhRh0vsCHepCYOH6
=Gxyi
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-hmp-20180621' into staging
HMP pull 2018-06-21
Minor fixes and reenable preconfig
# gpg: Signature made Thu 21 Jun 2018 17:43:09 BST
# gpg: using RSA key 0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-hmp-20180621:
hmp: Allow HMP in preconfig state again
hmp: add exit_preconfig
hmp: Add commands for preconfig
qmp: Enable a few commands in preconfig state
hmp: Restrict auto-complete in preconfig
hmp: Allow help on preconfig commands
hmp: Add flag for preconfig commands
hmp-commands: use long for begin and length in dump-guest-memory
monitor: report entirety of hmp command on error
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For now, the actual command ix x-nbd-server-add-bitmap, reflecting
the fact that we are still working on libvirt code that proves the
command works as needed, and also the fact that we may remove
bitmap-export-name (and just require that the exported name be the
bitmap name).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180609151758.17343-6-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: make the command experimental by adding x- prefix]
Signed-off-by: Eric Blake <eblake@redhat.com>
Commands query-chardev, query-version, query-name, query-uuid,
query-iothreads, query-memdev are informational and do not depend on
the machine being initialized. Make them available in preconfig
runstate to make the latter a little bit more useful.
The generic qom commands don't depend on the machine being initialized
either; so enabled qom-list, qom-get, qom-set, qom-list-types,
qom-list-properties.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180620153947.30834-5-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This patch allows the user to specify whether to use active or only
background mode for mirror block jobs. Currently, this setting will
remain constant for the duration of the entire block job.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180613181823.13618-14-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch implements active synchronous mirroring. In active mode, the
passive mechanism will still be in place and is used to copy all
initially dirty clusters off the source disk; but every write request
will write data both to the source and the target disk, so the source
cannot be dirtied faster than data is mirrored to the target. Also,
once the block job has converged (BLOCK_JOB_READY sent), source and
target are guaranteed to stay in sync (unless an error occurs).
Active mode is completely optional and currently disabled at runtime. A
later patch will add a way for users to enable it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20180613181823.13618-13-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Limit the background transfer bandwidth during the postcopy
phase to the value set on this new parameter. The default, 0,
corresponds to the existing behaviour which is unlimited bandwidth.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180613102642.23995-2-dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Legacy -drive supports "password-secret" parameter that isn't
available with -blockdev / blockdev-add. That's because we backed out
our first try to provide it there due to interface design doubts, in
commit 577d8c9a81, v2.9.0.
This is the second try. It brings back the parameter, except it's
named "key-secret" now.
Let's review our reasons for backing out the first try, as stated in
the commit message:
* BlockdevOptionsRbd member @password-secret isn't actually a
password, it's a key generated by Ceph.
Addressed by the rename.
* We're not sure where member @password-secret belongs (see the
previous commit).
See previous commit.
* How @password-secret interacts with settings from a configuration
file specified with @conf is undocumented.
Not actually true, the documentation for @conf says "Values in the
configuration file will be overridden by options specified via QAPI",
and we've tested this.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Parameter auth-client-required lets you configure authentication
methods. We tried to provide that in v2.9.0, but backed out due to
interface design doubts (commit 464444fcc1).
This commit is similar to what we backed out, but simpler: we use a
list of enumeration values instead of a list of objects with a member
of enumeration type.
Let's review our reasons for backing out the first try, as stated in
the commit message:
* The implementation uses deprecated rados_conf_set() key
"auth_supported". No biggie.
Fixed: we use "auth-client-required".
* The implementation makes -drive silently ignore invalid parameters
"auth" and "auth-supported.*.X" where X isn't "auth". Fixable (in
fact I'm going to fix similar bugs around parameter server), so
again no biggie.
That fix is commit 2836284db6. This commit doesn't bring the bugs
back.
* BlockdevOptionsRbd member @password-secret applies only to
authentication method cephx. Should it be a variant member of
RbdAuthMethod?
We've had time to ponder, and we decided to stick to the way Ceph
configuration works: the key configured separately, and silently
ignored if the authentication method doesn't use it.
* BlockdevOptionsRbd member @user could apply to both methods cephx
and none, but I'm not sure it's actually used with none. If it
isn't, should it be a variant member of RbdAuthMethod?
Likewise.
* The client offers a *set* of authentication methods, not a list.
Should the methods be optional members of BlockdevOptionsRbd instead
of members of list @auth-supported? The latter begs the question
what multiple entries for the same method mean. Trivial question
now that RbdAuthMethod contains nothing but @type, but less so when
RbdAuthMethod acquires other members, such the ones discussed above.
Again, we decided to stick to the way Ceph configuration works, except
we make auth-client-required a list of enumeration values instead of a
string containing keywords separated by delimiters.
* How BlockdevOptionsRbd member @auth-supported interacts with
settings from a configuration file specified with @conf is
undocumented. I suspect it's untested, too.
Not actually true, the documentation for @conf says "Values in the
configuration file will be overridden by options specified via QAPI",
and we've tested this.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These point to the job versions now, not the blockjob versions which
don't really exist anymore.
Except set-speed, which does. It sticks out like a sore thumb. This
patch doesn't fix that, but it doesn't make it any worse, either.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
During the design for manual completion, we decided not to use the
"manual" property as a shorthand for both auto-dismiss and auto-finalize.
Fix the wording.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is needed, for example, to create a new bitmap and merge several
disabled bitmaps into a new one. Without this flag we will have to
put block-dirty-bitmap-add and block-dirty-bitmap-disable into one
transaction.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20180606182449.1607-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20180606182449.1607-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Expose the ability to turn bitmaps "on" or "off". This is experimental
and principally for the sake of the Libvirt Checkpoints API, and it may
or may not be committed for 3.0.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 20180606182449.1607-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Activating the block devices causes the locks to be taken on
the backing file. If we're running with -S and the destination libvirt
hasn't started the destination with 'cont', it's expecting the locks are
still untaken.
Don't activate the block devices if we're not going to autostart the VM;
'cont' already will do that anyway. This change is tied to the new
migration capability 'late-block-activate' that defaults to off, keeping
the old behaviour by default.
bz: https://bugzilla.redhat.com/show_bug.cgi?id=1560854
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The recently introduced qom-list-properties QMP command raised
a question what properties it (and its cousin - device-list-properties)
can possibly print - only those defined by DeviceClass::props
or dynamically created in TypeInfo::instance_init() so properties created
elsewhere won't show up and this behaviour might confuse the user.
For example, PIIX4 does that from piix4_pm_realize() via
piix4_pm_add_propeties():
object_property_add_uint8_ptr(OBJECT(s), ACPI_PM_PROP_ACPI_ENABLE_CMD,
&acpi_enable_cmd, NULL);
This adds a note to the command descriptions about the limitation.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20180530071129.9013-1-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch will allow the user to include the domainname option in
replies from the built-in DHCP server.
Signed-off-by: Benjamin Drung <benjamin.drung@profitbricks.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
* New command-line option: --preconfig
This option allows pausing QEMU and allow the configuration
using QMP commands before running board initialization code.
* New QMP set-numa-node, now made possible because of --preconfig
* Small update on -numa error messages
-----BEGIN PGP SIGNATURE-----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=RHIj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/numa-next-pull-request' into staging
NUMA queue, 2018-05-30
* New command-line option: --preconfig
This option allows pausing QEMU and allow the configuration
using QMP commands before running board initialization code.
* New QMP set-numa-node, now made possible because of --preconfig
* Small update on -numa error messages
# gpg: Signature made Thu 31 May 2018 00:02:59 BST
# gpg: using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/numa-next-pull-request:
tests: functional tests for QMP command set-numa-node
qmp: add set-numa-node command
qmp: permit query-hotpluggable-cpus in preconfig state
tests: extend qmp test with preconfig checks
cli: add --preconfig option
tests: qapi-schema tests for allow-preconfig
qapi: introduce new cmd option "allow-preconfig"
hmp: disable monitor in preconfig state
qapi: introduce preconfig runstate
numa: split out NumaOptions parsing into set_numa_options()
numa: postpone options post-processing till machine_run_board_init()
numa: clarify error message when node index is out of range in -numa dist, ...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
it will allow mgmt to query possible CPUs, which depends on
used machine(version)/-smp options, without restarting
QEMU and use results to configure numa mapping or adding
CPUs with device_add* later.
PS:
*) device_add is not allowed to run at preconfig in this series
but later it could be dealt with by injecting -device
in preconfig state and letting existing -device handling
to actually plug devices
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1525423069-61903-10-git-send-email-imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This option allows pausing QEMU in the new RUN_STATE_PRECONFIG state,
allowing the configuration of QEMU from QMP before the machine jumps
into board initialization code of machine_run_board_init()
The intent is to allow management to query machine state and additionally
configure it using previous query results within one QEMU instance
(i.e. eliminate the need to start QEMU twice, 1st to query board specific
parameters and 2nd for actual VM start using query results for
additional parameters).
The new option complements -S option and could be used with or without
it. The difference is that -S pauses QEMU when the machine is completely
initialized with all devices wired up and ready to execute guest code
(QEMU needs only to unpause VCPUs to let guest execute its code),
while the "preconfig" option pauses QEMU early before board specific init
callback (machine_run_board_init) is executed and allows the configuration
of machine parameters which will be used by board init code.
When early introspection/configuration is done, command 'exit-preconfig'
should be used to exit RUN_STATE_PRECONFIG and transition to the next
requested state (i.e. if -S is used then QEMU will pause the second
time when board/device initialization is completed or start guest
execution if -S isn't provided on CLI)
PS:
Initially 'preconfig' is planned to be used for configuring numa
topology depending on board specified possible cpus layout.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1526059483-42847-1-git-send-email-imammedo@redhat.com>
[ehabkost: Changed "since 2.13" to "since 3.0"]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
New option will be used to allow commands, which are prepared/need
to run, during preconfig state. Other commands that should be able
to run in preconfig state, should be amended to not expect machine
in initialized state or deal with it.
For compatibility reasons, commands that don't use new flag
'allow-preconfig' explicitly are not permitted to run in
preconfig state but allowed in all other states like they used
to be.
Within this patch allow following commands in preconfig state:
qmp_capabilities
query-qmp-schema
query-commands
query-command-line-options
query-status
exit-preconfig
to allow qmp connection, basic introspection and moving to the next
state.
PS:
set-numa-node and query-hotpluggable-cpus will be enabled later in
a separate patches.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1526057503-39287-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[ehabkost: Changed "since 2.13" to "since 3.0"]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
New preconfig runstate will be used in follow up patches
related to introducing --preconfig CLI option and is
intended to replace prelaunch runstate from QEMU start
up to machine_init callback.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1525423069-61903-4-git-send-email-imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[ehabkost: Changed "since 2.13" to "since 3.0"]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We're ready to declare the blockdev-create job stable. This renames the
corresponding QMP command from x-blockdev-create to blockdev-create.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
This changes the x-blockdev-create QMP command so that it doesn't block
the monitor and the main loop any more, but starts a background job that
performs the image creation.
The basic job as implemented here is all that is necessary to make image
creation asynchronous and to provide a QMP interface that can be marked
stable, but it still lacks a few features that jobs usually provide: The
job will ignore pause commands and it doesn't publish more than very
basic progress yet (total-progress is 1 and current-progress advances
from 0 to 1 when the driver callbacks returns). These features can be
added later without breaking compatibility.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
We're going to make the next release be 3.0, not 2.13; change
the annotations in our json appropriately.
Changes produced with
sed -i -e 's/2\.13/3.0/g' qapi/*.json
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20180522104000.9044-2-peter.maydell@linaro.org
This adds a minimal query-jobs implementation that shouldn't pose many
design questions. It can later be extended to expose more information,
and especially job-specific information.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a QMP event that is emitted whenever a job transitions from
one status to another.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This adds a separate schema file for all job-related definitions that
aren't tied to the block layer.
For a start, move the enums JobType, JobStatus and JobVerb.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This moves BlockJob.status and the closely related functions
(block_)job_state_transition() and (block_)job_apply_verb to Job. The
two QAPI enums are renamed to JobStatus and JobVerb.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
QAPI types aren't externally visible, so we can rename them without
causing problems. Before we add a job type to Job, rename the enum
so it can be used for more than just block jobs.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Clarify that len is just an estimation of the end value of offset, and
that offset increases monotonically while len can change arbitrarily.
While touching the documentation of offset, move it directly after len
to match the order of the declaration below.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Commit 0ec4dfb8d changed block-job_pause/resume so that they return an
error if they don't do anything because the job is already
paused/running. It forgot to update the documentation, so do that now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
"vlan" will be dropped in 2.13, not in 2.12. And while we're at it,
use the better wording "dropped in" instead of "removed with" (also
for the "dump" removal).
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Blank lines and comments as suggested by Eric.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180427111502.9822-1-dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It pauses an ongoing migration. Currently it only supports postcopy.
Note that this command will work on either side of the migration.
Basically when we trigger this on one side, it'll interrupt the other
side as well since the other side will get notified on the disconnect
event.
However, it's still possible that the other side is not notified, for
example, when the network is totally broken, or due to some firewall
configuration changes. In that case, we will also need to run the same
command on the other side so both sides will go into the paused state.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-24-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
s/2.12/2.13/
The first allow-oob=true command. It's used on destination side when
the postcopy migration is paused and ready for a recovery. After
execution, a new migration channel will be established for postcopy to
continue.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-21-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
s/2.12/2.13/
Introducing new migration state "postcopy-recover". If a migration
procedure is paused and the connection is rebuilt afterward
successfully, we'll switch the source VM state from "postcopy-paused" to
the new state "postcopy-recover", then we'll do the resume logic in the
migration thread (along with the return path thread).
This patch only do the state switch on source side. Another following up
patch will handle the state switching on destination side using the same
status bit.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-10-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
s/2.11/2.13/
It will be used when we want to resume one paused migration.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-8-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
s/2.12/2.13/
Introducing a new state "postcopy-paused", which can be used when the
postcopy migration is paused. It is targeted for postcopy network
failure recovery.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-3-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This adds a simple copy-on-read filter driver. It relies on the already
existing COR functionality in the central block layer code, which may be
moved here once we no longer need it there.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180421132929.21610-2-mreitz@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
When we've reached the concluded state, we need to expose the error
state if applicable. Add the new field.
This should be sufficient for determining if a job completed
successfully or not after concluding; if we want to discriminate
based on how it failed more mechanically, we can always add an
explicit return code enumeration later.
I didn't bother to make it only show up if we are in the concluded
state; I don't think it's necessary.
Cc: qemu-stable@nongnu.org
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's been marked as deprecated since QEMU v2.9.0, so that should have
been enough time for everybody to either just drop unnecessary "vlan=0"
parameters, to switch to the modern -device + -netdev syntax for connecting
guest NICs with host network backends, or to switch to the "hubport" netdev
in case hubs are really wanted instead.
Buglink: https://bugs.launchpad.net/qemu/+bug/658904
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
mincore(2) checks whether pages are resident. Use it to verify that
page cache has been dropped.
You can trigger a verification failure by mmapping the image file from
another process that loads a byte from a page, forcing it to become
resident. bdrv_co_invalidate_cache() will fail while that process is
alive.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20180427162312.18583-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The TARGET_BASE_ARCH values from "configure" don't all map to the
@CpuInfoArch enum constants; in particular "s390x" from the former does
not match @s390 in the latter. Clients are known to rely on the @s390
constant specifically, so we can't change it silently. Instead, deprecate
the @CpuInfoFast.@arch member (in favor of @CpuInfoFast.@target) using the
regular deprecation process.
(No deprecation reminder is added to sysemu_target_to_cpuinfo_arch(): once
@CpuInfoFast.@arch is removed, the assignment expression that calls
sysemu_target_to_cpuinfo_arch() from qmp_query_cpus_fast() will have to
disappear; in turn the static function left without callers will also
break the build, thus it'll have to go.)
Cc: "Daniel P. Berrange" <berrange@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20180427192852.15013-6-lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add a new field @target (of type @SysEmuTarget) to the output of the
@query-cpus-fast command, which provides more information about the
emulation target than the field @arch (of type @CpuInfoArch). Make @target
the new discriminator for the @CpuInfoFast return structure. Keep @arch
for compatibility.
Cc: "Daniel P. Berrange" <berrange@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180427192852.15013-5-lersek@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we have @SysEmuTarget, it makes sense to restrict
@TargetInfo.@arch to valid sysemu targets at the schema level.
Cc: "Daniel P. Berrange" <berrange@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180427192852.15013-4-lersek@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We'll soon need an enumeration type that lists all the softmmu targets
that QEMU (the project) supports. Introduce @SysEmuTarget to
"common.json".
The enum constant @x86_64 doesn't match the QAPI convention of preferring
hyphen ("-") over underscore ("_"). This is intentional; the @SysEmuTarget
constants are supposed to produce QEMU executable names when stringified
and appended to the "qemu-system-" prefix. Put differently, the
replacement text of the TARGET_NAME preprocessor macro must be possible to
look up in the list of (stringified) enum constants.
Like other enum types, @SysEmuTarget too can be used for discriminator
fields in unions. For the @i386 constant, a C-language union member called
"i386" would be generated. On mingw build hosts, "i386" is a macro
however. Add "i386" to "polluted_words" at once.
Cc: "Daniel P. Berrange" <berrange@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20180427192852.15013-3-lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
* Commit ca230ff33f added the @arch field to @CpuInfoFast, but it failed
to set the new field in qmp_query_cpus_fast(), when TARGET_S390X was not
defined. The updated @query-cpus-fast example in "qapi-schema.json"
showed "arch":"x86" only because qmp_query_cpus_fast() calls g_malloc0()
to allocate @CpuInfoFast, and the CPU_INFO_ARCH_X86 enum constant is
generated with value 0.
All @arch values other than @s390 implied the @CpuInfoOther sub-struct
for @CpuInfoFast -- at the time of writing the patch --, thus no fields
other than @arch needed to be set when TARGET_S390X was not defined. Set
@arch now, by copying the corresponding assignments from
qmp_query_cpus().
* Commit 25fa194b7b added the @riscv enum constant to @CpuInfoArch (used
in both @CpuInfo and @CpuInfoFast -- the return types of the @query-cpus
and @query-cpus-fast commands, respectively), and assigned, in both
return structures, the @CpuInfoRISCV sub-structure to the new enum
value.
However, qmp_query_cpus_fast() would not populate either the @arch field
or the @CpuInfoRISCV sub-structure, when TARGET_RISCV was defined; only
qmp_query_cpus() would.
Assign @CpuInfoOther to the @riscv enum constant in @CpuInfoFast, and
populate only the @arch field in qmp_query_cpus_fast(). Getting CPU
state without interrupting KVM is an exceptional thing that only S390X
does currently. Quoting Cornelia Huck <cohuck@redhat.com>, "s390x is
exceptional in that it has state in QEMU that is actually interesting
for upper layers and can be retrieved without performance penalty". See
also
<https://www.redhat.com/archives/libvir-list/2018-February/msg00121.html>.
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Viktor VM Mihajlovski <mihajlov@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Fixes: ca230ff33f
Fixes: 25fa194b7b
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180427192852.15013-2-lersek@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
For convenience and clarity, make it possible to call qobject_ref() at
the time when the reference is associated with a variable, or
argument, by making qobject_ref() return the same pointer as given.
Use that to simplify the callers.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-5-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Useless change to qobject_ref_impl() dropped, commit message improved
slightly]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we can safely call QOBJECT() on QObject * as well as its
subtypes, we can have macros qobject_ref() / qobject_unref() that work
everywhere instead of having to use QINCREF() / QDECREF() for QObject
and qobject_incref() / qobject_decref() for its subtypes.
The replacement is mechanical, except I broke a long line, and added a
cast in monitor_qmp_cleanup_req_queue_locked(). Unlike
qobject_decref(), qobject_unref() doesn't accept void *.
Note that the new macros evaluate their argument exactly once, thus no
need to shout them.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, semantic conflict resolved, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
v2: Rebase on top of master
v3: Fix the json format (Eric Blake)
Fix a comparison issue (Gerd Hoffmann)
Signed-off-by: Elie Tournier <elie.tournier@collabora.com>
Message-id: 20180413135842.21325-2-tournier.elie@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Postcopy total blocktime is available on destination side only.
But query-migrate was possible only for source. This patch
adds ability to call query-migrate on destination.
To be able to see postcopy blocktime, need to request postcopy-blocktime
capability.
The query-migrate command will show following sample result:
{"return":
"postcopy-vcpu-blocktime": [115, 100],
"status": "completed",
"postcopy-blocktime": 100
}}
postcopy_vcpu_blocktime contains list, where the first item is the first
vCPU in QEMU.
This patch has a drawback, it combines states of incoming and
outgoing migration. Ongoing migration state will overwrite incoming
state. Looks like better to separate query-migrate for incoming and
outgoing migration or add parameter to indicate type of migration.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1521742647-25550-7-git-send-email-a.perevalov@samsung.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Right now it could be used on destination side to
enable vCPU blocktime calculation for postcopy live migration.
vCPU blocktime - it's time since vCPU thread was put into
interruptible sleep, till memory page was copied and thread awake.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1521742647-25550-2-git-send-email-a.perevalov@samsung.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
What static=on really does is what we call metadata preallocation for
other block drivers. While we can still change the QMP interface, make
it more consistent by using 'preallocation' for VDI, too.
This doesn't implement any new functionality, so the only supported
preallocation modes are 'off' and 'metadata' for now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
It may need to treat PC-DIMM and NVDIMM differently, e.g., when
deciding the necessity of non-volatile flag bit in SRAT memory
affinity structures.
A new field 'nvdimm' is added to the union type MemoryDeviceInfo for
such purpose. Its type is currently PCDIMMDeviceInfo and will be
updated when necessary in the future.
It also fixes "info memory-devices"/query-memory-devices which
currently show nvdimm devices as dimm devices since
object_dynamic_cast(obj, TYPE_PC_DIMM) happily cast nvdimm to
TYPE_PC_DIMM which it's been inherited from.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Set (and clear) histograms through new command
block-latency-histogram-set and show new statistics in
query-blockstats results.
For now, the command is marked experimental with prefix 'x-',
to gain experience with the interface without being stuck
with design decisions.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180309165212.97144-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[eblake: fix typos, mention x- prefix in commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
This command is only used to test OOB functionality. It should not be
used for any other purposes.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-22-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweak]
Signed-off-by: Eric Blake <eblake@redhat.com>
Having "allow-oob":true for a command does not mean that this command
will always be run in out-of-band mode. The out-of-band quick path will
only be executed if we specify the extra "run-oob" flag when sending the
QMP request:
{ "execute": "command-that-allows-oob",
"arguments": { ... },
"control": { "run-oob": true } }
The "control" key is introduced to store this extra flag. "control"
field is used to store arguments that are shared by all the commands,
rather than command specific arguments. Let "run-oob" be the first.
Note that in the patch I exported qmp_dispatch_check_obj() to be used to
check the request earlier, and at the same time allowed "id" field to be
there since actually we always allow that.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-19-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: rebase to qobject_to(), spelling fix]
Signed-off-by: Eric Blake <eblake@redhat.com>
Here "oob" stands for "Out-Of-Band". When "allow-oob" is set, it means
the command allows out-of-band execution.
The "oob" idea is proposed by Markus Armbruster in following thread:
https://lists.gnu.org/archive/html/qemu-devel/2017-09/msg02057.html
This new "allow-oob" boolean will be exposed by "query-qmp-schema" as
well for command entries, so that QMP clients can know which commands
can be used in out-of-band calls. For example the command "migrate"
originally looks like:
{"name": "migrate", "ret-type": "17", "meta-type": "command",
"arg-type": "86"}
And it'll be changed into:
{"name": "migrate", "ret-type": "17", "allow-oob": false,
"meta-type": "command", "arg-type": "86"}
This patch only provides the QMP interface level changes. It does not
contain the real out-of-band execution implementation yet.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-18-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: rebase on introspection done by qlit]
Signed-off-by: Eric Blake <eblake@redhat.com>
This event will be emitted if one QMP command is dropped. Also,
declare an enum for the reasons.
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-16-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
There were no QMP capabilities defined. Define the first capability,
"oob", to allow out-of-band messages.
After this patch, we will allow QMP clients to enable QMP capabilities
when sending the first "qmp_capabilities" command. Originally we are
starting QMP session with no arguments like:
{ "execute": "qmp_capabilities" }
Now we can enable some QMP capabilities using (take OOB as example,
which is the only capability that we support):
{ "execute": "qmp_capabilities",
"arguments": { "enable": [ "oob" ] } }
When the "arguments" key is not provided, no capability is enabled.
For capability "oob", the monitor needs to be run on a dedicated IO
thread, otherwise the command will fail. For example, trying to enable
OOB on a MUXed typed QMP monitor will fail.
One thing to mention is that QMP capabilities are per-monitor, and also
when the connection is closed due to some reason, the capabilities will
be reset.
Also, touch up qmp-test.c to test the new bits.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-11-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: touch up commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
We have a clear replacement, so let's deprecate it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20180224154033.29559-8-mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch reworks some places which use either qobject_type() checks
plus qobject_to(), where the latter alone is sufficient, or NULL checks
plus qobject_type() checks where we can simply do a qobject_to() != NULL
check.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20180224154033.29559-6-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: rebase to qobject_to() parameter ordering]
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch was generated using the following Coccinelle script:
@@
expression Obj;
@@
(
- qobject_to_qnum(Obj)
+ qobject_to(QNum, Obj)
|
- qobject_to_qstring(Obj)
+ qobject_to(QString, Obj)
|
- qobject_to_qdict(Obj)
+ qobject_to(QDict, Obj)
|
- qobject_to_qlist(Obj)
+ qobject_to(QList, Obj)
|
- qobject_to_qbool(Obj)
+ qobject_to(QBool, Obj)
)
and a bit of manual fix-up for overly long lines and three places in
tests/check-qjson.c that Coccinelle did not find.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20180224154033.29559-4-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: swap order from qobject_to(o, X), rebase to master, also a fix
to latent false-positive compiler complaint about hw/i386/acpi-build.c]
Signed-off-by: Eric Blake <eblake@redhat.com>
When doing drive mirror to a low speed shared storage, if there was heavy
BLK IO write workload in VM after the 'ready' event, drive mirror block job
can't be canceled immediately, it would keep running until the heavy BLK IO
workload stopped in the VM.
Libvirt depends on the current block-job-cancel semantics, which is that
when used without a flag after the 'ready' event, the command blocks
until data is in sync. However, these semantics are awkward in other
situations, for example, people may use drive mirror for realtime
backups while still wanting to use block live migration. Libvirt cannot
start a block live migration while another drive mirror is in progress,
but the user would rather abandon the backup attempt as broken and
proceed with the live migration than be stuck waiting for the current
drive mirror backup to finish.
The drive-mirror command already includes a 'force' flag, which libvirt
does not use, although it documented the flag as only being useful to
quit a job which is paused. However, since quitting a paused job has
the same effect as abandoning a backup in a non-paused job (namely, the
destination file is not in sync, and the command completes immediately),
we can just improve the documentation to make the force flag obviously
useful.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jeff Cody <jcody@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Reported-by: Huaitong Han <huanhuaitong@didichuxing.com>
Signed-off-by: Huaitong Han <huanhuaitong@didichuxing.com>
Signed-off-by: Liang Li <liliangleo@didichuxing.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds the .bdrv_co_create driver callback to vpc, which
enables image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This adds the .bdrv_co_create driver callback to vhdx, which
enables image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This adds the .bdrv_co_create driver callback to qed, which
enables image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This adds the .bdrv_co_create driver callback to qcow, which
enables image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
This adds the .bdrv_co_create driver callback to parallels, which
enables image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
In preparation of QAPI-fying VDI image creation, we have to create a
BlockdevCreateOptionsVdi type which is received by a (future)
vdi_co_create().
vdi_co_create_opts() now converts the QemuOpts object into such a
BlockdevCreateOptionsVdi object. The protocol-layer file is still
created in vdi_co_do_create() (and BlockdevCreateOptionsVdi.file is set
to an empty string), but that will be addressed by a follow-up patch.
Note that cluster-size is not part of the QAPI schema because it is not
supported by default.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds the .bdrv_co_create driver callback to luks, which enables
image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Expose the "manual" property via QAPI for the backup-related jobs.
As of this commit, this allows the management API to request the
"concluded" and "dismiss" semantics for backup jobs.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of automatically transitioning from PENDING to CONCLUDED, gate
the .prepare() and .commit() phases behind an explicit acknowledgement
provided by the QMP monitor if auto_finalize = false has been requested.
This allows us to perform graph changes in prepare and/or commit so that
graph changes do not occur autonomously without knowledge of the
controlling management layer.
Transactions that have reached the "PENDING" state together can all be
moved to invoke their finalization methods by issuing block_job_finalize
to any one job in the transaction.
Jobs in a transaction with mixed job->auto_finalize settings will all
remain stuck in the "PENDING" state, as if the entire transaction was
specified with auto_finalize = false. Jobs that specified
auto_finalize = true, however, will still not emit the PENDING event.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For jobs utilizing the new manual workflow, we intend to prohibit
them from modifying the block graph until the management layer provides
an explicit ACK via block-job-finalize to move the process forward.
To distinguish this runstate from "ready" or "waiting," we add a new
"pending" event and status.
For now, the transition from PENDING to CONCLUDED/ABORTING is automatic,
but a future commit will add the explicit block-job-finalize step.
Transitions:
Waiting -> Pending: Normal transition.
Pending -> Concluded: Normal transition.
Pending -> Aborting: Late transactional failures and cancellations.
Removed Transitions:
Waiting -> Concluded: Jobs must go to PENDING first.
Verbs:
Cancel: Can be applied to a pending job.
+---------+
|UNDEFINED|
+--+------+
|
+--v----+
+---------+CREATED+-----------------+
| +--+----+ |
| | |
| +--+----+ +------+ |
+---------+RUNNING<----->PAUSED| |
| +--+-+--+ +------+ |
| | | |
| | +------------------+ |
| | | |
| +--v--+ +-------+ | |
+---------+READY<------->STANDBY| | |
| +--+--+ +-------+ | |
| | | |
| +--v----+ | |
+---------+WAITING<---------------+ |
| +--+----+ |
| | |
| +--v----+ |
+---------+PENDING| |
| +--+----+ |
| | |
+--v-----+ +--v------+ |
|ABORTING+--->CONCLUDED| |
+--------+ +--+------+ |
| |
+--v-+ |
|NULL<--------------------+
+----+
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For jobs that are stuck waiting on others in a transaction, it would
be nice to know that they are no longer "running" in that sense, but
instead are waiting on other jobs in the transaction.
Jobs that are "waiting" in this sense cannot be meaningfully altered
any longer as they have left their running loop. The only meaningful
user verb for jobs in this state is "cancel," which will cancel the
whole transaction, too.
Transitions:
Running -> Waiting: Normal transition.
Ready -> Waiting: Normal transition.
Waiting -> Aborting: Transactional cancellation.
Waiting -> Concluded: Normal transition.
Removed Transitions:
Running -> Concluded: Jobs must go to WAITING first.
Ready -> Concluded: Jobs must go to WAITING first.
Verbs:
Cancel: Can be applied to WAITING jobs.
+---------+
|UNDEFINED|
+--+------+
|
+--v----+
+---------+CREATED+-----------------+
| +--+----+ |
| | |
| +--v----+ +------+ |
+---------+RUNNING<----->PAUSED| |
| +--+-+--+ +------+ |
| | | |
| | +------------------+ |
| | | |
| +--v--+ +-------+ | |
+---------+READY<------->STANDBY| | |
| +--+--+ +-------+ | |
| | | |
| +--v----+ | |
+---------+WAITING<---------------+ |
| +--+----+ |
| | |
+--v-----+ +--v------+ |
|ABORTING+--->CONCLUDED| |
+--------+ +--+------+ |
| |
+--v-+ |
|NULL<--------------------+
+----+
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For jobs that have reached their CONCLUDED state, prior to having their
last reference put down (meaning jobs that have completed successfully,
unsuccessfully, or have been canceled), allow the user to dismiss the
job's lingering status report via block-job-dismiss.
This gives management APIs the chance to conclusively determine if a job
failed or succeeded, even if the event broadcast was missed.
Note: block_job_do_dismiss and block_job_decommission happen to do
exactly the same thing, but they're called from different semantic
contexts, so both aliases are kept to improve readability.
Note 2: Don't worry about the 0x04 flag definition for AUTO_DISMISS, she
has a friend coming in a future patch to fill the hole where 0x02 is.
Verbs:
Dismiss: operates on CONCLUDED jobs only.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a new state that specifically demarcates when we begin to permanently
demolish a job after it has performed all work. This makes the transition
explicit in the STM table and highlights conditions under which a job may
be demolished.
Alongside this state, add a new helper command "block_job_decommission",
which transitions to the NULL state and puts down our implicit reference.
This separates instances in the code for "block_job_unref" which merely
undo a matching "block_job_ref" with instances intended to initiate the
full destruction of the object.
This decommission action also sets a number of fields to make sure that
block internals or external users that are holding a reference to a job
to see when it "finishes" are convinced that the job object is "done."
This is necessary, for instance, to do a block_job_cancel_sync on a
created object which will not make any progress.
Now, all jobs must go through block_job_decommission prior to being
freed, giving us start-to-finish state machine coverage for jobs.
Transitions:
Created -> Null: Early failure event before the job is started
Concluded -> Null: Standard transition.
Verbs:
None. This should not ever be visible to the monitor.
+---------+
|UNDEFINED|
+--+------+
|
+--v----+
+---------+CREATED+------------------+
| +--+----+ |
| | |
| +--v----+ +------+ |
+---------+RUNNING<----->PAUSED| |
| +--+-+--+ +------+ |
| | | |
| | +------------------+ |
| | | |
| +--v--+ +-------+ | |
+---------+READY<------->STANDBY| | |
| +--+--+ +-------+ | |
| | | |
+--v-----+ +--v------+ | |
|ABORTING+--->CONCLUDED<-------------+ |
+--------+ +--+------+ |
| |
+--v-+ |
|NULL<---------------------+
+----+
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
add a new state "CONCLUDED" that identifies a job that has ceased all
operations. The wording was chosen to avoid any phrasing that might
imply success, error, or cancellation. The task has simply ceased all
operation and can never again perform any work.
("finished", "done", and "completed" might all imply success.)
Transitions:
Running -> Concluded: normal completion
Ready -> Concluded: normal completion
Aborting -> Concluded: error and cancellations
Verbs:
None as of this commit. (a future commit adds 'dismiss')
+---------+
|UNDEFINED|
+--+------+
|
+--v----+
+---------+CREATED|
| +--+----+
| |
| +--v----+ +------+
+---------+RUNNING<----->PAUSED|
| +--+-+--+ +------+
| | |
| | +------------------+
| | |
| +--v--+ +-------+ |
+---------+READY<------->STANDBY| |
| +--+--+ +-------+ |
| | |
+--v-----+ +--v------+ |
|ABORTING+--->CONCLUDED<-------------+
+--------+ +---------+
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a new state ABORTING.
This makes transitions from normative states to error states explicit
in the STM, and serves as a disambiguation for which states may complete
normally when normal end-states (CONCLUDED) are added in future commits.
Notably, Paused/Standby jobs do not transition directly to aborting,
as they must wake up first and cooperate in their cancellation.
Transitions:
Created -> Aborting: can be cancelled (by the system)
Running -> Aborting: can be cancelled or encounter an error
Ready -> Aborting: can be cancelled or encounter an error
Verbs:
None. The job must finish cleaning itself up and report its final status.
+---------+
|UNDEFINED|
+--+------+
|
+--v----+
+---------+CREATED|
| +--+----+
| |
| +--v----+ +------+
+---------+RUNNING<----->PAUSED|
| +--+----+ +------+
| |
| +--v--+ +-------+
+---------+READY<------->STANDBY|
| +-----+ +-------+
|
+--v-----+
|ABORTING|
+--------+
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Which commands ("verbs") are appropriate for jobs in which state is
also somewhat burdensome to keep track of.
As of this commit, it looks rather useless, but begins to look more
interesting the more states we add to the STM table.
A recurring theme is that no verb will apply to an 'undefined' job.
Further, it's not presently possible to restrict the "pause" or "resume"
verbs any more than they are in this commit because of the asynchronous
nature of how jobs enter the PAUSED state; justifications for some
seemingly erroneous applications are given below.
=====
Verbs
=====
Cancel: Any state except undefined.
Pause: Any state except undefined;
'created': Requests that the job pauses as it starts.
'running': Normal usage. (PAUSED)
'paused': The job may be paused for internal reasons,
but the user may wish to force an indefinite
user-pause, so this is allowed.
'ready': Normal usage. (STANDBY)
'standby': Same logic as above.
Resume: Any state except undefined;
'created': Will lift a user's pause-on-start request.
'running': Will lift a pause request before it takes effect.
'paused': Normal usage.
'ready': Will lift a pause request before it takes effect.
'standby': Normal usage.
Set-speed: Any state except undefined, though ready may not be meaningful.
Complete: Only a 'ready' job may accept a complete request.
=======
Changes
=======
(1)
To facilitate "nice" error checking, all five major block-job verb
interfaces in blockjob.c now support an errp parameter:
- block_job_user_cancel is added as a new interface.
- block_job_user_pause gains an errp paramter
- block_job_user_resume gains an errp parameter
- block_job_set_speed already had an errp parameter.
- block_job_complete already had an errp parameter.
(2)
block-job-pause and block-job-resume will no longer no-op when trying
to pause an already paused job, or trying to resume a job that isn't
paused. These functions will now report that they did not perform the
action requested because it was not possible.
iotests have been adjusted to address this new behavior.
(3)
block-job-complete doesn't worry about checking !block_job_started,
because the permission table guards against this.
(4)
test-bdrv-drain's job implementation needs to announce that it is
'ready' now, in order to be completed.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We're about to add several new states, and booleans are becoming
unwieldly and difficult to reason about. It would help to have a
more explicit bookkeeping of the state of blockjobs. To this end,
add a new "status" field and add our existing states in a redundant
manner alongside the bools they are replacing:
UNDEFINED: Placeholder, default state. Not currently visible to QMP
unless changes occur in the future to allow creating jobs
without starting them via QMP.
CREATED: replaces !!job->co && paused && !busy
RUNNING: replaces effectively (!paused && busy)
PAUSED: Nearly redundant with info->paused, which shows pause_count.
This reports the actual status of the job, which almost always
matches the paused request status. It differs in that it is
strictly only true when the job has actually gone dormant.
READY: replaces job->ready.
STANDBY: Paused, but job->ready is true.
New state additions in coming commits will not be quite so redundant:
WAITING: Waiting on transaction. This job has finished all the work
it can until the transaction converges, fails, or is canceled.
PENDING: Pending authorization from user. This job has finished all the
work it can until the job or transaction is finalized via
block_job_finalize. This implies the transaction has converged
and left the WAITING phase.
ABORTING: Job has encountered an error condition and is in the process
of aborting.
CONCLUDED: Job has ceased all operations and has a return code available
for query and may be dismissed via block_job_dismiss.
NULL: Job has been dismissed and (should) be destroyed. Should never
be visible to QMP.
Some of these states appear somewhat superfluous, but it helps define the
expected flow of a job; so some of the states wind up being synchronous
empty transitions. Importantly, jobs can be in only one of these states
at any given time, which helps code and external users alike reason about
the current condition of a job unambiguously.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>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=QeRU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange/tags/socket-next-pull-request' into staging
# gpg: Signature made Tue 13 Mar 2018 18:12:14 GMT
# gpg: using RSA key BE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>"
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange/tags/socket-next-pull-request:
char: allow passing pre-opened socket file descriptor at startup
char: refactor parsing of socket address information
sockets: allow SocketAddress 'fd' to reference numeric file descriptors
sockets: check that the named file descriptor is a socket
sockets: move fd_is_socket() into common sockets code
sockets: strengthen test suite IP protocol availability checks
sockets: pull code for testing IP availability out of specific test
cutils: add qemu_strtoi & qemu_strtoui parsers for int/unsigned int types
char: don't silently skip tn3270 protocol init when TLS is enabled
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add special state, when qmp operations on the bitmap are disabled.
It is needed during bitmap migration. "Frozen" state is not
appropriate here, because it looks like bitmap is unchanged.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20180207155837.92351-5-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
The SocketAddress 'fd' kind accepts the name of a file descriptor passed
to the monitor with the 'getfd' command. This makes it impossible to use
the 'fd' kind in cases where a monitor is not available. This can apply in
handling command line argv at startup, or simply if internal code wants to
use SocketAddress and pass a numeric FD it has acquired from elsewhere.
Fortunately the 'getfd' command mandated that the FD names must not start
with a leading digit. We can thus safely extend semantics of the
SocketAddress 'fd' kind, to allow a purely numeric name to reference an
file descriptor that QEMU already has open. There will be restrictions on
when each kind can be used.
In codepaths where we are handling a monitor command (ie cur_mon != NULL),
we will only support use of named file descriptors as before. Use of FD
numbers is still not permitted for monitor commands.
In codepaths where we are not handling a monitor command (ie cur_mon ==
NULL), we will not support named file descriptors. Instead we can reference
FD numers explicitly. This allows the app spawning QEMU to intentionally
"leak" a pre-opened socket to QEMU and reference that in a SocketAddress
definition, or for code inside QEMU to pass pre-opened FDs around.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The command can be used by libvirt to query the SEV capabilities.
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The command can be used by libvirt to retrieve the measurement of SEV guest.
This measurement is a signature of the memory contents that was encrypted
through the LAUNCH_UPDATE_DATA.
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The QMP query command can used to retrieve the SEV information when
memory encryption is enabled on AMD platform.
Cc: Eric Blake <eblake@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU's screendump command can only take dumps from the primary display.
When using multiple VGA cards, there is no way to get a dump from a
secondary card or other display heads yet. So let's add a 'device' and
a 'head' parameter to the HMP and QMP commands to be able to specify
alternative devices and heads with the screendump command, too.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1520267868-31778-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This adds the .bdrv_co_create driver callback to ssh, which enables
image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This makes the host-key-check option available in blockdev-add.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This adds the .bdrv_co_create driver callback to sheepdog, which enables
image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The "redundancy" option for Sheepdog image creation is currently a
string that can encode one or two integers depending on its format,
which at the same time implicitly selects a mode.
This patch turns it into a QAPI union and converts the string into such
a QAPI object before interpreting the values.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This adds the .bdrv_co_create driver callback to nfs, which enables
image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This adds the .bdrv_co_create driver callback to rbd, which enables
image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This adds the .bdrv_co_create driver callback to gluster, which enables
image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This adds the .bdrv_co_create driver callback to file, which enables
image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This adds a synchronous x-blockdev-create QMP command that can create
qcow2 images on a given node name.
We don't want to block while creating an image, so this is not the final
interface in all aspects, but BlockdevCreateOptionsQcow2 and
.bdrv_co_create() are what they actually might look like in the end. In
any case, this should be good enough to test whether we interpret
BlockdevCreateOptions as we should.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This creates a BlockdevCreateOptions union type that will contain all of
the options for image creation. We'll start out with an empty struct
type BlockdevCreateNotSupported for all drivers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This adds RISC-V into the build system enabling the following targets:
- riscv32-softmmu
- riscv64-softmmu
- riscv32-linux-user
- riscv64-linux-user
This adds defaults configs for RISC-V, enables the build for the RISC-V
CPU core, hardware, and Linux User Emulation. The 'qemu-binfmt-conf.sh'
script is updated to add the RISC-V ELF magic.
Expected checkpatch errors for consistency reasons:
ERROR: line over 90 characters
FILE: scripts/qemu-binfmt-conf.sh
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu>
Signed-off-by: Michael Clark <mjc@sifive.com>
There is already 'device-list-properties' which does most of the job,
however it does not handle everything returned by qom-list-types such
as machines as they inherit directly from TYPE_OBJECT and not TYPE_DEVICE.
It does not handle abstract classes either.
This adds a new qom-list-properties command which prints properties
of a specific class and its instance. It is pretty much a simplified copy
of the device-list-properties handler.
Since it creates an object instance, device properties should appear
in the output as they are copied to QOM properties at the instance_init
hook.
This adds a object_class_property_iter_init() helper to allow class
properties enumeration uses it in the new QMP command to allow properties
listing for abstract classes.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20180301130939.15875-3-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ObjectPropertyInfo is more generic and only missing @description.
This adds a description to ObjectPropertyInfo and removes
DevicePropertyInfo so the resulting ObjectPropertyInfo can be used
elsewhere.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20180301130939.15875-2-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----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=2axz
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Mon 05 Mar 2018 17:45:51 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (38 commits)
block: Fix NULL dereference on empty drive error
qcow2: Replace align_offset() with ROUND_UP()
block/ssh: Add basic .bdrv_truncate()
block/ssh: Make ssh_grow_file() blocking
block/ssh: Pull ssh_grow_file() from ssh_create()
qemu-img: Make resize error message more general
qcow2: make qcow2_co_create2() a coroutine_fn
block: rename .bdrv_create() to .bdrv_co_create_opts()
Revert "IDE: Do not flush empty CDROM drives"
block: test blk_aio_flush() with blk->root == NULL
block: add BlockBackend->in_flight counter
block: extract AIO_WAIT_WHILE() from BlockDriverState
aio: rename aio_context_in_iothread() to in_aio_context_home_thread()
docs: document how to use the l2-cache-entry-size parameter
specs/qcow2: Fix documentation of the compressed cluster descriptor
iotest 033: add misaligned write-zeroes test via truncate
block: fix write with zero flag set and iovector provided
block: Drop unused .bdrv_co_get_block_status()
vvfat: Switch to .bdrv_co_block_status()
vpc: Switch to .bdrv_co_block_status()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# include/block/block.h
blk_error_action() sends a BLOCK_IO_ERROR QMP event which includes the
node name of its root node. If the BlockBackend represents an empty
drive, there is no root node, so we should not try to access its node
name. Make the field optional in the event and include it only when
the BlockBackend isn't empty.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJanLRTAAoJEO8Ells5jWIRAxsH/3wX62o+msLjJHakjcu2OTMG
vdhnB8GfjC5HgMYbovG7TJ95KXg7VRodwru9zgJheTK7DG8fG0nFRuzr8L2tSAph
3s0YTFYDXJ6MBYD//ubdX+jNnchIvMlTX6yheAzcXvQb+nCcN2efN0XpSlGR+g4D
wGi1lWKurGEJE6RUfYPpbbUkjXjbbKyclE0RL+WBmmyruerXI8OxuXQ3GuHK75fb
cZLiToyP9+qnnDyT4lceG5vGRjYLtL8t1nB01M4UTr+tlCkMMsoOjufzGB/CDUdm
oGi1OuKRw06xTLroUJ/uiwSKQH6dMbrv6sLvk92dHnL9k2ZAjv2bVAgz8eAG7o0=
=pPIZ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Mon 05 Mar 2018 03:06:59 GMT
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
tap: setting error appropriately when calling net_init_tap_one()
hw/net: Remove unnecessary header includes
net: Add a new convenience option "--nic" to configure default/on-board NICs
net: Remove the deprecated 'host_net_add' and 'host_net_remove' HMP commands
net: Remove the deprecated way of dumping network packets
net: Make net_client_init() static
net: Only show vhost-user in the help text if CONFIG_POSIX is defined
net: List available netdevs with "-netdev help"
net: Move error reporting from net_init_client/netdev to the calling site
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
"-net dump" has been marked as deprecated since QEMU v2.10, since it
only works with the deprecated 'vlan' parameter (or hubs). Network
dumping should be done with "-object filter-dump" nowadays instead.
Since nobody complained so far about the deprecation message, let's
finally get rid of "-net dump" now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Move qapi-schema.json to qapi/, so it's next to its modules, and all
files get generated to qapi/, not just the ones generated for modules.
Consistently name the generated files qapi-MODULE.EXT:
qmp-commands.[ch] become qapi-commands.[ch], qapi-event.[ch] become
qapi-events.[ch], and qmp-introspect.[ch] become qapi-introspect.[ch].
This gets rid of the temporary hacks in scripts/qapi/commands.py,
scripts/qapi/events.py, and scripts/qapi/common.py.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-28-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[eblake: Fix trailing dot in tpm.c, undo temporary hack for OSX toolchain]
Signed-off-by: Eric Blake <eblake@redhat.com>
The previous commit improved compile time by including less of the
generated QAPI headers. This is impossible for stuff defined directly
in qapi-schema.json, because that ends up in headers that that pull in
everything.
Move everything but include directives from qapi-schema.json to new
sub-module qapi/misc.json, then include just the "misc" shard where
possible.
It's possible everywhere, except:
* monitor.c needs qmp-command.h to get qmp_init_marshal()
* monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need
qapi-event.h to get enum QAPIEvent
Perhaps we'll get rid of those some other day.
Adding a type to qapi/migration.json now recompiles some 120 instead
of 2300 out of 5100 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-25-armbru@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit f0df84c6 added watchdog-set-action in the main qapi-schema.json,
but it belongs better in qapi/run-state.json alongside the definition
of WatchdogAction. The command was written prior to commit 0e201d34
creating the latter file, even though it was merged after.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180226225744.26356-1-eblake@redhat.com>
This patch is the s390 implementation of guest crash information,
similar to commit d187e08dc4 ("i386/cpu: add crash-information QOM
property") and the related commits. We will detect several crash
reasons, with the "disabled wait" being the most important one, since
this is used by all s390 guests as a "panic like" notification.
Demonstrate these ways with examples as follows.
1. crash-information QOM property;
Run qemu with -qmp unix:qmp-sock,server, then use utility "qmp-shell"
to execute "qom-get" command, and might get the result like,
(QEMU) (QEMU) qom-get path=/machine/unattached/device[0] \
property=crash-information
{"return": {"core": 0, "reason": "disabled-wait", "psw-mask": 562956395872256, \
"type": "s390", "psw-addr": 1102832}}
2. GUEST_PANICKED event reporting;
Run qemu with a socket option, and telnet or nc to that,
-chardev socket,id=qmp,port=4444,host=localhost,server \
-mon chardev=qmp,mode=control,pretty=on \
Negotiating the mode by { "execute": "qmp_capabilities" }, and the crash
information will be reported on a guest crash event like,
{
"timestamp": {
"seconds": 1518004739,
"microseconds": 552563
},
"event": "GUEST_PANICKED",
"data": {
"action": "pause",
"info": {
"core": 0,
"psw-addr": 1102832,
"reason": "disabled-wait",
"psw-mask": 562956395872256,
"type": "s390"
}
}
}
3. log;
Run qemu with the parameters: -D <logfile> -d guest_errors, to
specify the logfile and log item. The results might be,
Guest crashed on cpu 0: disabled-wait
PSW: 0x0002000180000000 0x000000000010d3f0
Co-authored-by: Jing Liu <liujbjl@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20180209122543.25755-1-borntraeger@de.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[CH: tweaked qapi comment]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Switch over all leftover users to qapi DisplayType.
Then delete the unused display_type variable.
Add 'default' DisplayType, which isn't an actual display type but
a placeholder for "user didn't specify a display". It will be replaced
by the DisplayType actually used, which in turn depends on the
DisplayTypes availabel in the particular build.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180202111022.19269-13-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add QAPI DisplayType enum, DisplayOptions union and DisplayGTK struct.
Switch gtk configuration to use the qapi type.
Some bookkeeping (fullscreen for example) is done twice now, this is
temporary until more/all UIs are switched over to qapi configuration.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180202111022.19269-5-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Note that the 'Add test for migration to bad destination' displays
a 'Connection refused' during running, but still gives the correct exit
code and OK (It's checking that the source doesn't fail when
it can't connect, so that's the right error).
If it's particularly disliked that patch can be skipped individually.
-----BEGIN PGP SIGNATURE-----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=drNV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20180214a' into staging
Migration pull 20180214
Note that the 'Add test for migration to bad destination' displays
a 'Connection refused' during running, but still gives the correct exit
code and OK (It's checking that the source doesn't fail when
it can't connect, so that's the right error).
If it's particularly disliked that patch can be skipped individually.
# gpg: Signature made Wed 14 Feb 2018 15:33:04 GMT
# gpg: using RSA key 0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20180214a:
migration: pass MigrationState to migrate_init()
migration: allow send_rq to fail
migration: provide postcopy_fault_thread_notify()
migration: reuse mis->userfault_quit_fd
migration: better error handling with QEMUFile
tests/migration: Add test for migration to bad destination
migration: Fix early failure cleanup
tests/migration: Add source to PC boot block
migration: improve documentation of postcopy-ram
migration/xen: Check return value of qemu_fclose
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This capability must have the same value on both source and destination,
otherwise migration fails (commit 875fcd013a "migration: incoming
postcopy advise sanity checks").
Let's write it down in various places where postcopy-ram is documented.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <151801810352.29167.4832480228518630626.stgit@bahia.lan>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Now that the code is ready to handle L2 slices we can finally add an
option to allow configuring their size.
An L2 slice is the portion of an L2 table that is read by the qcow2
cache. Until now the cache was always reading full L2 tables, and
since the L2 table size is equal to the cluster size this was not very
efficient with large clusters. Here's a more detailed explanation of
why it makes sense to have smaller cache entries in order to load L2
data:
https://lists.gnu.org/archive/html/qemu-block/2017-09/msg00635.html
This patch introduces a new command-line option to the qcow2 driver
named l2-cache-entry-size (cf. l2-cache-size). The cache entry size
has the same restrictions as the cluster size: it must be a power of
two and it has the same range of allowed values, with the additional
requirement that it must not be larger than the cluster size.
The L2 cache entry size (L2 slice size) remains equal to the cluster
size for now by default, so this feature must be explicitly enabled.
Although my tests show that 4KB slices consistently improve
performance and give the best results, let's wait and make more tests
with different cluster sizes before deciding on an optimal default.
Now that the cache entry size is not necessarily equal to the cluster
size we need to reflect that in the MIN_L2_CACHE_SIZE documentation.
That minimum value is a requirement of the COW algorithm: we need to
read two L2 slices (and not two L2 tables) in order to do COW, see
l2_allocate() for the actual code.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: c73e5611ff4a9ec5d20de68a6c289553a13d2354.1517840877.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
To maintain load/store disabled bitmap there is new approach:
- deprecate @autoload flag of block-dirty-bitmap-add, make it ignored
- store enabled bitmaps as "auto" to qcow2
- store disabled bitmaps without "auto" flag to qcow2
- on qcow2 open load "auto" bitmaps as enabled and others
as disabled (except in_use bitmaps)
Also, adjust iotests 165 and 176 appropriately.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180202160752.143796-1-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-14-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/qmp/qlist.h
drop from 4551 (out of 4743) to 16 in my "build everything" tree.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-12-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-11-armbru@redhat.com>
The macro expansions of qdict_put_TYPE() and qlist_append_TYPE() need
qbool.h, qnull.h, qnum.h and qstring.h to compile. We include qnull.h
and qnum.h in the headers, but not qbool.h and qstring.h. Works,
because we include those wherever the macros get used.
Open-coding these helpers is of dubious value. Turn them into
functions and drop the includes from the headers.
This cleanup makes the number of objects depending on qapi/qmp/qnum.h
from 4551 (out of 4743) to 46 in my "build everything" tree. For
qapi/qmp/qnull.h, the number drops from 4552 to 21.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-10-armbru@redhat.com>
