* extend --extra-*flags behavior to meson-based tests
* allow using snappy in static builds
* i386 TCG fixes
* fix build failure when libgbm is not available
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmGJB/gUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM0+gf/STwGM2h7I/1V/rAQnLzpA4Y9iMwB
urMjz5rBqSpBSvyxA83JAj7a/6V70U+gm+03Nh4zdKyvKKzVmsSHtLU6EbZFUy5y
+agY6AoB/3VLIWSf8zJ5KsxLS3r030mvu6XBbs94AEDbQ5O4YjO+Tb5r/dIOVhJb
W1B59cPvkSmmBoFnJe2/CNcHf0AMDQ96ge2su+Sx909Lyo94r6kibFb1bkjep/ke
0f21o3nAXSN/GBoZutLyZvMdEpwddrYwjVIyV2zCKL2XjTVXDKIphHM2iLyJxNli
mnsQY51ZVdNkNAVy76nUWQ4+nJ/kT8Dhcl+6kWvI373PgokmEVpgZ0QKHQ==
=GH6j
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Fix off-by-one in MODE SELECT commands
* extend --extra-*flags behavior to meson-based tests
* allow using snappy in static builds
* i386 TCG fixes
* fix build failure when libgbm is not available
# gpg: Signature made Mon 08 Nov 2021 12:20:24 PM CET
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* remotes/bonzini/tags/for-upstream:
ui/gtk-egl: Fix build failure when libgbm is not available
configure: ignore preexisting QEMU_*FLAGS envvars
configure: propagate --extra-cflags and --extra-ldflags to meson compile tests
configure: preserve CFLAGS, CXXFLAGS and LDFLAGS in config.status
configure: simplify calls to meson_quote
docs: adjust for demise of scripts/create_config
meson: perform snappy test with the C++ compiler if used
hw/scsi/scsi-disk: MODE_PAGE_ALLS not allowed in MODE SELECT commands
target-i386: mmu: fix handling of noncanonical virtual addresses
target-i386: mmu: use pg_mode instead of HF_LMA_MASK
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The config-host.h, $TARGET_NAME-config-target.h,
$TARGET_NAME-config-devices.h files are now generated by
configure_file() rather than scripts/create_config. Adjust
he relevant paragraph in docs/devel/build-system.rst, and take
the occasion to fix a preexisting confusion of *.h vs *.mak.
Reported-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The series rotted already. Here's the new changes.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
[ extra backticks fixes ]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20211004215238.1523082-3-jsnow@redhat.com>
The single backtick markup in ReST is the "default role". Currently,
Sphinx's default role is called "content". Sphinx suggests you can use
the "Any" role instead to turn any single-backtick enclosed item into a
cross-reference.
This is useful for things like autodoc for Python docstrings, where it's
often nicer to reference other types with `foo` instead of the more
laborious :py:meth:`foo`. It's also useful in multi-domain cases to
easily reference definitions from other Sphinx domains, such as
referencing C code definitions from outside of kerneldoc comments.
Before we do that, though, we'll need to turn all existing usages of the
"content" role to inline verbatim markup wherever it does not correctly
resolve into a cross-refernece by using double backticks instead.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20211004215238.1523082-2-jsnow@redhat.com>
cache plugin now allows optional L2 per-core cache emulation that can be
configured through plugin arguments, this commit adds this functionality
to the docs.
While I'm at it, I editted the bullet point for cache plugin to say:
contrib/plugins/cache.c
instead of
contrib/plugins/cache
to match other plugins.
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210810134844.166490-6-ma.mandourr@gmail.com>
Message-Id: <20211026102234.3961636-18-alex.bennee@linaro.org>
We no longer wish to have commands implemented in HMP only. All commands
should start with a QMP implementation and the HMP merely be a shim
around this. To reduce the burden of implementing QMP commands where
there is low expectation of machine usage, requirements for QAPI
modelling are relaxed provided the command is under the "x-" name
prefix.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This illustrates how to add a QMP command returning unstructured text,
following the guidelines added in the previous patch. The example uses
a simplified version of 'info roms'.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Traditionally we have required that newly added QMP commands will model
any returned data using fine grained QAPI types. This is good for
commands that are intended to be consumed by machines, where clear data
representation is very important. Commands that don't satisfy this have
generally been added to HMP only.
In effect the decision of whether to add a new command to QMP vs HMP has
been used as a proxy for the decision of whether the cost of designing a
fine grained QAPI type is justified by the potential benefits.
As a result the commands present in QMP and HMP are non-overlapping
sets, although HMP comamnds can be accessed indirectly via the QMP
command 'human-monitor-command'.
One of the downsides of 'human-monitor-command' is that the QEMU monitor
APIs remain tied into various internal parts of the QEMU code. For
example any exclusively HMP command will need to use 'monitor_printf'
to get data out. It would be desirable to be able to fully isolate the
monitor implementation from QEMU internals, however, this is only
possible if all commands are exclusively based on QAPI with direct
QMP exposure.
The way to achieve this desired end goal is to finese the requirements
for QMP command design. For cases where the output of a command is only
intended for human consumption, it is reasonable to want to simplify
the implementation by returning a plain string containing formatted
data instead of designing a fine grained QAPI data type. This can be
permitted if-and-only-if the command is exposed under the 'x-' name
prefix. This indicates that the command data format is liable to
future change and that it is not following QAPI design best practice.
The poster child example for this would be the 'info registers' HMP
command which returns printf formatted data representing CPU state.
This information varies enourmously across target architectures and
changes relatively frequently as new CPU features are implemented.
It is there as debugging data for human operators, and any machine
usage would treat it as an opaque blob. It is thus reasonable to
expose this in QMP as 'x-query-registers' returning a 'str' field.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Best practice is to use the 'hmp_handle_error' function, not
'monitor_printf' or 'error_report_err'. This ensures that the
message always gets an 'Error: ' prefix, distinguishing it
from normal command output.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The new headings reflect the intended structure of the document and will
better suit additions that follow.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The file already covers writing HMP commands, in addition to
the QMP commands, so it deserves a more general name.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
By convention, names starting with "x-" are experimental. The parts
of external interfaces so named may be withdrawn or changed
incompatibly in future releases.
The naming convention makes unstable interfaces easy to recognize.
Promoting something from experimental to stable involves a name
change. Client code needs to be updated. Occasionally bothersome.
Worse, the convention is not universally observed:
* QOM type "input-barrier" has properties "x-origin", "y-origin".
Looks accidental, but it's ABI since 4.2.
* QOM types "memory-backend-file", "memory-backend-memfd",
"memory-backend-ram", and "memory-backend-epc" have a property
"x-use-canonical-path-for-ramblock-id" that is documented to be
stable despite its name.
We could document these exceptions, but documentation helps only
humans. We want to recognize "unstable" in code, like "deprecated".
So support recognizing it the same way: introduce new special feature
flag "unstable". It will be treated specially by the QAPI generator,
like the existing feature flag "deprecated", and unlike regular
feature flags.
This commit updates documentation and prepares tests. The next commit
updates the QAPI schema. The remaining patches update the QAPI
generator and wire up -compat policy checking.
Management applications can then use query-qmp-schema and -compat to
manage or guard against use of unstable interfaces the same way as for
deprecated interfaces.
docs/devel/qapi-code-gen.txt no longer mandates the naming convention.
Using it anyway might help writers of programs that aren't
full-fledged management applications. Not using it can save us
bothersome renames. We'll see how that shakes out.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-Id: <20211028102520.747396-2-armbru@redhat.com>
This is quite similar to commit 84ab008687 "qapi: Add feature flags to
struct members", only for enums instead of structs.
Special feature flag 'deprecated' is silently ignored there. This is
okay only because it will be implemented shortly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20211025042405.3762351-3-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
The next commit will add feature flags to enum members. There's a
problem, though: query-qmp-schema shows an enum type's members as an
array of member names (SchemaInfoEnum member @values). If it showed
an array of objects with a name member, we could simply add more
members to these objects. Since it's just strings, we can't.
I can see three ways to correct this design mistake:
1. Do it the way we should have done it, plus compatibility goo.
We want a ['SchemaInfoEnumMember'] member in SchemaInfoEnum. Since
changing @values would be a compatibility break, add a new member
@members instead.
@values is now redundant. In my testing, output of
qemu-system-x86_64's query-qmp-schema grows by 11% (18.5KiB).
We can deprecate @values now and drop it later. This will break
outmoded clients. Well-behaved clients such as libvirt are
expected to break cleanly.
2. Like 1, but omit "boring" elements of @member, and empty @member.
@values does not become redundant. @members augments it. Somewhat
cumbersome, but output of query-qmp-schema grows only as we make
enum members non-boring.
There is nothing to deprecate here.
3. Versioned query-qmp-schema.
query-qmp-schema provides either @values or @members. The QMP
client can select which version it wants. There is no redundant
output.
We can deprecate old versions and eventually drop them. This will
break outmoded clients. Breaking cleanly is easier than for 1.
While 1 and 2 operate within the common rules for compatible
evolution apply (section "Compatibility considerations" in
docs/devel/qapi-code-gen.rst), 3 bypasses them. Attractive when
operating within the rules is just too awkward. Not the case here.
This commit implements 1. Libvirt developers prefer it.
Deprecate @values in favour of @members. Since query-qmp-schema
compatibility is pretty fundamental for management applications, an
extended grace period is advised.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <20211025042405.3762351-2-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Right now meson_options.txt lists about 90 options. Each option
needs code in configure to parse it and pass the option down to Meson as
a -D command-line argument; in addition the default must be duplicated
between configure and meson_options.txt. This series tries to remove
the code duplication by generating the case statement for those --enable
and --disable options, as well as the corresponding help text.
About 80% of the options can be handled completely by the new mechanism.
Eight meson options are not of the --enable/--disable kind. Six more need
to be parsed in configure for various reasons documented in the patch,
but they still have their help automatically generated.
The advantages are:
- less code in configure
- parsing and help is more consistent (for example --enable-blobs was
not supported)
- options are described entirely in one place, meson_options.txt.
This make it more attractive to use Meson options instead of
hand-crafted configure options and config-host.mak
A few options change name: --enable-tcmalloc and --enable-jemalloc
become --enable-malloc={tcmalloc,jemalloc}; --disable-blobs becomes
--disable-install-blobs; --enable-trace-backend becomes
--enable-trace-backends. However, the old names are allowed
for backwards compatibility.
Message-Id: <20211007130829.632254-19-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These functions are much closer to the softmmu helper
functions, in that they take the complete MemOpIdx,
and from that they may enforce required alignment.
The previous cpu_ldst.h functions did not have alignment info,
and so did not enforce it. Retain this by adding MO_UNALN to
the MemOp that we create in calling the new functions.
Note that we are not yet enforcing alignment for user-only,
but we now have the information with which to do so.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Clean up the heading levels to use === --- ~~~ ^^^ '''. Reorganize the
outline for the Avocado part, and always include headings for the
class names.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up the heading levels to use === --- ~~~, and move the command line
building near to the other execution steps.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the possibility of running all the tests from a single file, or
multiple files, running a single test within a file or multiple tests
within multiple files using `make check-acceptance` and the
AVOCADO_TESTS environment variable.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210923161141.232208-4-willianr@redhat.com>
Add instructions to the Acceptance tests section about running a
single test file or a test within the test file.
Signed-off-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210923161141.232208-3-willianr@redhat.com>
Although it is possible to run a specific test using the avocado
command-line, a user may want to use a specific tag while running the
``make check-acceptance`` during the development or debugging.
This allows using the AVOCADO_TAGS environment variable where the user
takes total control of which tests should run based on the tags defined.
This also makes the check-acceptance command flexible to restrict tests
based on tags while running on CI.
e.g.:
AVOCADO_TAGS="foo bar baz" make check-acceptance
Signed-off-by: Willian Rampazzo <willianr@redhat.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210923161141.232208-2-willianr@redhat.com>
Simple unions predate flat unions. Having both complicates the QAPI
schema language and the QAPI generator. We haven't been using simple
unions in new code for a long time, because they are less flexible and
somewhat awkward on the wire.
The previous commits eliminated simple union from the tree. Now drop
them from the QAPI schema language entirely, and update mentions of
"flat union" to just "union".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210917143134.412106-22-armbru@redhat.com>
Break lines between members instead of within members.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210917143134.412106-2-armbru@redhat.com>
Fedora has switched to a different CoC. QEMU's own code of conduct
is based on the previous version and cites it as a source. Replace
the link with one to the Wayback Machine.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use a standard heading format for the index.rst file in a directory.
Using overlines makes it clear that individual documents can use e.g.
=== for chapter titles and --- for section titles, as suggested in the
Linux kernel guidelines[1]. They could do it anyway, because documents
included in a toctree are parsed separately and therefore are not tied
to the same conventions for headings. However, keeping some consistency is
useful since sometimes files are included from multiple places.
[1] https://www.kernel.org/doc/html/latest/doc-guide/sphinx.html
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now we have removed all the uses of gen_io_end() from target frontends,
the only callsite is inside gen_tb_start(). Inline the code there,
and remove the reference to it from the documentation.
While we are inlining the code, switch it to use tcg_constant_i32()
so we don't have to manually create and destroy a TCG temporary.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210724134902.7785-3-peter.maydell@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
To understand the current state of QEMU CI/testing and have a base to
discuss the plans for the future, it is important to define some usual
terms. This patch defines the terms for "Automated tests", "Unit
testing", "Functional testing", "System testing", "Flaky tests",
"Gating", and "Continuous Integration".
Signed-off-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210831152939.97570-2-willianr@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
- fix typo in execlog plugin
- clean-up and document gitlab FOO_RUNNER_AVAILABLE vars
- fix plugin build issue on OSX and modules
- add multi-core support to cache modelling plugin
- clean-ups for plugin arg=FOO handling
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmEwqF4ACgkQ+9DbCVqe
KkTCcAf/fCHK1hhXJIaxpFyMGvCkhYzUgKlpL4b05ofXFyQJ4JWp+0OadQzBcVIN
PwsVVsXik/5ibKvQiud8wt3/kbr9gj5RZdwVITZMEpod6hy9Nt5oaUhxEZpiVs3f
XZG17zaK8huwTwU6EtHWOnvIWMCuvBXpw8cM/6jF6pEiq162VJbiRo9L/aQ+n0Io
TZTy9YqEbrZUTj+XrvgPV0TewjM6T/zTujXFJtyCzYJ3P3kx9z5a3/KzfyJI9qkk
TYw0MX9MY8J5/sXcP6OjOqXqppsRe+G5Uaz0BoW9SvOmR/0nNGy/N8mVCZTD6mqs
zMsWw5RyIZsZCyWEYj4TYWEORv5Kiw==
=CBs1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-for-6.2-020921-1' into staging
Testing and plugin updates:
- fix typo in execlog plugin
- clean-up and document gitlab FOO_RUNNER_AVAILABLE vars
- fix plugin build issue on OSX and modules
- add multi-core support to cache modelling plugin
- clean-ups for plugin arg=FOO handling
# gpg: Signature made Thu 02 Sep 2021 11:33:02 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-for-6.2-020921-1: (22 commits)
docs/devel: be consistent about example plugin names
docs/deprecated: deprecate passing plugin args through `arg=`
tests/plugins/syscalls: adhere to new arg-passing scheme
tests/plugins/mem: introduce "track" arg and make args not positional
tests/plugins/insn: made arg inline not positional and parse it as bool
tests/plugins/bb: adapt to the new arg passing scheme
docs/tcg-plugins: new passing parameters scheme for cache docs
plugins/howvec: adapting to the new argument passing scheme
plugins/hwprofile: adapt to the new plugin arguments scheme
plugins/lockstep: make socket path not positional & parse bool arg
plugins/hotblocks: Added correct boolean argument parsing
plugins/hotpages: introduce sortby arg and parsed bool args correctly
plugins/api: added a boolean parsing plugin api
plugins: allow plugin arguments to be passed directly
docs/devel/tcg-plugins: added cores arg to cache plugin
plugins: sort exported symbol list
plugins/cache: supported multicore cache modelling
plugins: do not limit exported symbols if modules are active
gitlab-ci: Fix ..._RUNNER_AVAILABLE variables and document them
gitlab-ci: Remove superfluous "dnf install" statement
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Make the backup-top filter driver available for user-created block
nodes (i.e. via blockdev-add)
- Allow running iotests with gdb or valgrind being attached to qemu
instances
- Fix the raw format driver's permissions: There is no metadata, so we
only need WRITE or RESIZE when the parent needs it
- Basic reopen implementation for win32 files (file-win32.c) so that
qemu-img commit can work
- uclibc/musl build fix for the FUSE export code
- Some iotests delinting
- block-hmp-cmds.c refactoring
-----BEGIN PGP SIGNATURE-----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=0tJJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/hreitz/tags/pull-block-2021-09-01' into staging
Block patches:
- Make the backup-top filter driver available for user-created block
nodes (i.e. via blockdev-add)
- Allow running iotests with gdb or valgrind being attached to qemu
instances
- Fix the raw format driver's permissions: There is no metadata, so we
only need WRITE or RESIZE when the parent needs it
- Basic reopen implementation for win32 files (file-win32.c) so that
qemu-img commit can work
- uclibc/musl build fix for the FUSE export code
- Some iotests delinting
- block-hmp-cmds.c refactoring
# gpg: Signature made Wed 01 Sep 2021 16:01:54 BST
# gpg: using RSA key CB62D7A0EE3829E45F004D34A1FA40D098019CDF
# gpg: issuer "hreitz@redhat.com"
# gpg: Good signature from "Hanna Reitz <hreitz@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: CB62 D7A0 EE38 29E4 5F00 4D34 A1FA 40D0 9801 9CDF
* remotes/hreitz/tags/pull-block-2021-09-01: (56 commits)
block/file-win32: add reopen handlers
block/export/fuse.c: fix fuse-lseek on uclibc or musl
block/block-copy: block_copy_state_new(): drop extra arguments
iotests/image-fleecing: add test-case for copy-before-write filter
iotests/image-fleecing: prepare for adding new test-case
iotests/image-fleecing: rename tgt_node
iotests/image-fleecing: proper source device
iotests.py: hmp_qemu_io: support qdev
iotests: move 222 to tests/image-fleecing
iotests/222: constantly use single quotes for strings
iotests/222: fix pylint and mypy complains
python:QEMUMachine: template typing for self returning methods
python/qemu/machine: QEMUMachine: improve qmp() method
python/qemu/machine.py: refactor _qemu_args()
qapi: publish copy-before-write filter
block/copy-before-write: make public block driver
block/block-copy: make setting progress optional
block/copy-before-write: initialize block-copy bitmap
block/copy-before-write: cbw_init(): use options
block/copy-before-write: bdrv_cbw_append(): drop unused compress arg
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some plugins were prefixed with `.c`, some were not. Since the name is
essentially the full-name of the plugin file, it's logical to include
the extension.
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Message-Id: <20210830121534.656559-1-ma.mandourr@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Correctly parsing plugin argument since they now must be provided as
full-form boolean parameters, e.g.:
-plugin ./contrib/plugins/libhowvec.so,verbose=on,inline=on
Also, introduced the argument "count" that accepts one opt to count
individually at a time.
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210730135817.17816-8-ma.mandourr@gmail.com>
Parsing boolean arguments correctly (e.g. pattern=on or source=false).
Introduced a new "track" argument that takes a [read|write] value. This
substitutes passing read or write to "arg=" that is deprecated.
Also, matches are now taken one by one through the "match" argument.
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210730135817.17816-7-ma.mandourr@gmail.com>
Since plugin arguments now expect boolean arguments, a plugin argument
name "sortby" now expects a value of "read", "write", or "address".
"io" arg is now expected to be passed as a full-form boolean parameter,
i.e. "io=on|true|yes|off|false|no"
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210730135817.17816-4-ma.mandourr@gmail.com>
The patch that recently introduced the S390X_RUNNER_AVAILABLE variable
in custom-runners.yml missed that the bottom half of the file is rather
about aarch64 than s390x. Thus rename the S390X_RUNNER_AVAILABLE to
AARCH64_RUNNER_AVAILABLE in those jobs.
Finally mention both variables in our CI documentation, too.
Fixes: c5dd0f0342 ("Improve rules for the staging branch")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210730143809.717079-4-thuth@redhat.com>
[AJB: moved due to docu changes]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210806141015.2487502-5-alex.bennee@linaro.org>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210809090114.64834-17-eesposit@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210809090114.64834-15-eesposit@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210809090114.64834-10-eesposit@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Introduce the "Debugging a test case" section, in preparation
to the additional flags that will be added in the next patches.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210809090114.64834-5-eesposit@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
It is quite common for a clock tree to involve possibly programmable
clock multipliers or dividers, where the frequency of a clock is for
instance divided by 8 to produce a slower clock to feed to a
particular device.
Currently we provide no convenient mechanism for modelling this. You
can implement it by having an input Clock and an output Clock, and
manually setting the period of the output clock in the period-changed
callback of the input clock, but that's quite clunky.
This patch adds support in the Clock objects themselves for setting a
multiplier or divider. The effect of setting this on a clock is that
when the clock's period is changed, all the children of the clock are
set to period * multiplier / divider, rather than being set to the
same period as the parent clock.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alexandre Iooss <erdnaxe@crans.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Message-id: 20210812093356.1946-10-peter.maydell@linaro.org
Commit 155e1c82ed deprecated the raspi2/raspi3 machine names.
Use the recommended new names: raspi2b and raspi3b.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20210827060815.2384760-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update the documentation describing the changes in this series.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210804083105.97531-2-marcandre.lureau@redhat.com>
[Rebased with straightforward conflicts]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This splits the CI docs into one file talking about job setup and usage
and another file describing provisioning of custom runners.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210812180403.4129067-2-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This does about the bare minimum, converting section headers to ReST
ones and adding an indent for code blocks.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210721165015.2180311-1-jsnow@redhat.com>
Reviewed-by: Connor Kuehl <ckuehl@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add clickables to many places.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210720235619.2048797-4-jsnow@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Mostly, add ``literal`` markers to a lot of things like C types, add
code blocks, and fix the way a few things render.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210720235619.2048797-3-jsnow@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This is a very rudimentary conversion from .txt to .rst changing as
little as possible, but getting it to render somewhat nicely; without
using any Sphinx directives. (It is 'native' ReST.)
Further patches will add cross-references and Sphinx-specific extensions
to make it sparkle.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210720235619.2048797-2-jsnow@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
In rST markup, single backticks `like this` represent "interpreted
text", which can be handled as a bunch of different things if tagged
with a specific "role":
https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#interpreted-text
(the most common one for us is "reference to a URL, which gets
hyperlinked").
The default "role" if none is specified is "title_reference",
intended for references to book or article titles, and it renders
into the HTML as <cite>...</cite> (usually comes out as italics).
Fix various places in the devel section of the manual which were
using single backticks when double backticks (for literal text)
were intended.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210726142338.31872-6-peter.maydell@linaro.org
In rST markup, single backticks `like this` represent "interpreted
text", which can be handled as a bunch of different things if tagged
with a specific "role":
https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#interpreted-text
(the most common one for us is "reference to a URL, which gets
hyperlinked").
The default "role" if none is specified is "title_reference",
intended for references to book or article titles, and it renders
into the HTML as <cite>...</cite> (usually comes out as italics).
To format a literal (generally rendered as fixed-width font),
double-backticks are required.
Mostly migration.rst gets this right, but some places incorrectly use
single backticks where double backticks were intended; correct them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 20210726142338.31872-5-peter.maydell@linaro.org
In rST markup, single backticks `like this` represent "interpreted
text", which can be handled as a bunch of different things if tagged
with a specific "role":
https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#interpreted-text
(the most common one for us is "reference to a URL, which gets
hyperlinked").
The default "role" if none is specified is "title_reference",
intended for references to book or article titles, and it renders
into the HTML as <cite>...</cite> (usually comes out as italics).
To format a literal (generally rendered as fixed-width font),
double-backticks are required.
ebpf_rss.rst gets this wrong in a few places; correct them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210726142338.31872-4-peter.maydell@linaro.org
One of the example meson.build fragments incorrectly quotes some
symbols as 'CONFIG_FOO`; the correct syntax here is 'CONFIG_FOO'.
(This isn't a rST formatting mistake because the example is displayed
literally; it's just the wrong kind of quote.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210726142338.31872-3-peter.maydell@linaro.org
In rST markup, single backticks `like this` represent "interpreted
text", which can be handled as a bunch of different things if tagged
with a specific "role":
https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#interpreted-text
(the most common one for us is "reference to a URL, which gets
hyperlinked").
The default "role" if none is specified is "title_reference",
intended for references to book or article titles, and it renders
into the HTML as <cite>...</cite> (usually comes out as italics).
build-system.rst seems to have been written under the mistaken
assumption that single-backticks mark up literal text (function
names, etc) which should be rendered in a fixed-width font.
The rST markup for this is ``double backticks``.
Update all the markup.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210726142338.31872-2-peter.maydell@linaro.org
We introduced the QEMU_CI_AVOCADO_TESTING variable in commit f56bf4caf
("gitlab: Run Avocado tests manually (except mainstream CI)"), but
forgot to document it properly. Do it now.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210727142431.1672530-2-philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since the top-level subsections aren't self-contained manuals
any more, the "Contents:" lines at the top of each of their
index pages look a bit odd; remove them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20210705095547.15790-4-peter.maydell@linaro.org
We merged our previous multiple-manual setup into a single Sphinx
manual, but we left some text in the various index.rst lines that
still calls the top level subsections separate 'manuals'. Update
them to talk about "this section of the manual" instead, and remove
now-obsolete comments about how the index.rst files are the "top
level page for the 'foo' manual".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20210705095547.15790-3-peter.maydell@linaro.org
- custom runner playbooks for configuring GitLab runners
- integrate Cirrus jobs into GitLab via cirrus-run
- clean-up docker package lists
- bump NetBSD to 9.2
- bump OpenBSD to 6.9
- make test-mmap more hexagon friendly
- fixup handling of hostaddr for plugins
- disallow some incompatible plugin configurations
- fix handling of -ldl for BSDs
- remove some old unused symbols from the plugin symbol map
- enable plugins by default for most TCG builds
- honour main build -Wall settings for plugins
- new execlog plugin
- new cache modelling plugin
- fix io_uring build regression
- disable modular TCG on Darwin
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmDu+xsACgkQ+9DbCVqe
KkQ2XAf+MRBeSMX9J091iloiqSjpuobAcVuoIFciG7gEqWd2iTQVPDqJNgBJUANQ
vTA7f89ljxj/FZjSZwLgR6cqY6X0ufXI1BLEIt7s78LJtVp14sHVo89GwNBzmRwo
615T49KG8b5EBBU5YlVcAW/m8DlfgI4b1ufS/qHldOukKegu+haoCDjGG6RNpYNx
mmXgLOBJiB/p2u2S73KTIa+3AEIIlsTJZpdLPus8hby+/Q4qB9t8YbdHaweyM9qs
NjiojczvlbHLFd/IQSl6fqBS9QI+KWf4+oFd6ZB4THhr9/GUYTiMeLjRKucBgDQG
TwGtd1RN3gAPI5aEJ0xlgCL/crz1qg==
=dQl6
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-plugins-140721-5' into staging
Testing and plugin updates:
- custom runner playbooks for configuring GitLab runners
- integrate Cirrus jobs into GitLab via cirrus-run
- clean-up docker package lists
- bump NetBSD to 9.2
- bump OpenBSD to 6.9
- make test-mmap more hexagon friendly
- fixup handling of hostaddr for plugins
- disallow some incompatible plugin configurations
- fix handling of -ldl for BSDs
- remove some old unused symbols from the plugin symbol map
- enable plugins by default for most TCG builds
- honour main build -Wall settings for plugins
- new execlog plugin
- new cache modelling plugin
- fix io_uring build regression
- disable modular TCG on Darwin
# gpg: Signature made Wed 14 Jul 2021 15:56:27 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-plugins-140721-5: (44 commits)
MAINTAINERS: Added myself as a reviewer for TCG Plugins
docs/devel: Added cache plugin to the plugins docs
plugins/cache: Added FIFO and LRU eviction policies
plugins/cache: Enable cache parameterization
plugins: Added a new cache modelling plugin
docs/devel: tcg-plugins: add execlog plugin description
contrib/plugins: add execlog to log instruction execution and memory access
contrib/plugins: enable -Wall for building plugins
tcg/plugins: enable by default for most TCG builds
configure: stop user enabling plugins on Windows for now
configure: add an explicit static and plugins check
configure: don't allow plugins to be enabled for a non-TCG build
tcg/plugins: remove some stale entries from the symbol list
meson.build: relax the libdl test to one for the function dlopen
meson.build: move TCG plugin summary output
plugins: fix-up handling of internal hostaddr for 32 bit
tests/tcg: make test-mmap a little less aggressive
tests/vm: update openbsd to release 6.9
tests/vm: update NetBSD to 9.2
tests/docker: expand opensuse-leap package list
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds description of the execlog TCG plugin with an example.
Signed-off-by: Alexandre Iooss <erdnaxe@crans.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210702081307.1653644-3-erdnaxe@crans.org>
Message-Id: <20210709143005.1554-36-alex.bennee@linaro.org>
Aside from a minor bloat to file size the ability to have TCG plugins
has no real impact on performance unless a plugin is actively loaded.
Even then the libempty.so plugin shows only a minor degradation in
performance caused by the extra book keeping the TCG has to do to keep
track of instructions. As it's a useful feature lets just enable it by
default and reduce our testing matrix a little.
We need to move our linker testing earlier so we can be sure we can
enable the loader module required. As we have ruled out static &
plugins in an earlier patch we can also reduce the indent a little.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210709143005.1554-33-alex.bennee@linaro.org>
To have the jobs dispatched to custom runners, gitlab-runner must
be installed, active as a service and properly configured. The
variables file and playbook introduced here should help with those
steps.
The playbook introduced here covers the Linux distributions and
has been primarily tested on OS/machines that the QEMU project
has available to act as runners, namely:
* Ubuntu 20.04 on aarch64
* Ubuntu 18.04 on s390x
But, it should work on all other Linux distributions. Earlier
versions were tested on FreeBSD too, so chances of success are
high.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Willian Rampazzo <willianr@redhat.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210630012619.115262-4-crosa@redhat.com>
Message-Id: <20210709143005.1554-4-alex.bennee@linaro.org>
To run basic jobs on custom runners, the environment needs to be
properly set up. The most common requirement is having the right
packages installed.
The playbook introduced here covers the QEMU's project s390x and
aarch64 machines. At the time this is being proposed, those machines
have already had this playbook applied to them.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210630012619.115262-3-crosa@redhat.com>
Message-Id: <20210709143005.1554-3-alex.bennee@linaro.org>
As described in the included documentation, the "custom runner" jobs
extend the GitLab CI jobs already in place. One of their primary
goals of catching and preventing regressions on a wider number of host
systems than the ones provided by GitLab's shared runners.
This sets the stage in which other community members can add their own
machine configuration documentation/scripts, and accompanying job
definitions. As a general rule, those newly added contributed jobs
should run as "non-gating", until their reliability is verified (AKA
"allow_failure: true").
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210630012619.115262-2-crosa@redhat.com>
Message-Id: <20210709143005.1554-2-alex.bennee@linaro.org>
This introduces a new feature to the functional tests: automatic setting of
the '-cpu VALUE' option to the created vm if the test is tagged with
'cpu:VALUE'. The 'cpu' property is made available to the test object as well.
For example, for a simple test as:
def test(self):
"""
🥑 tags=cpu:host
"""
self.assertEqual(self.cpu, "host")
self.vm.launch()
The resulting QEMU evocation will be like:
qemu-system-x86_64 -display none -vga none \
-chardev socket,id=mon,path=/var/tmp/avo_qemu_sock_pdgzbgd_/qemu-1135557-monitor.sock \
-mon chardev=mon,mode=control -cpu host
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210430133414.39905-2-wainersm@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
The tests based on the LinuxTest class give the test writer a ready to
use guest operating system, currently pinned to Fedora 31.
With this change, it's now possible to choose different distros and
versions, similar to how other tags and parameter can be set for the
target arch, accelerator, etc.
One of the reasons for this work, is that some development features
depend on updates on the guest side. For instance the tests on
virtiofs_submounts.py, require newer kernels, and may benefit from
running, say on Fedora 34, without the need for a custom kernel.
Please notice that the pre-caching of the Fedora 31 images done during
the early stages of `make check-acceptance` (before the tests are
actually executed) are not expanded here to cover every new image
added. But, the tests will download other needed images (and cache
them) during the first execution.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20210414221457.1653745-4-crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-25-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-23-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Jose R. Ziviani <jziviani@suse.de>
Message-Id: <20210624103836.2382472-22-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a duplicate of CONFIG_EVENTFD, handle it directly in meson.build.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Without a single top-level header in the .rst file, the index ended
up linking to all of the top-level headers separately. Now the index
links to the top-level header at the beginning of the document and
any inner headers are correctly linked as sub-items in the index.
Signed-off-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210528123526.144065-1-luis.pires@eldorado.org.br>
Message-Id: <20210623102749.25686-3-alex.bennee@linaro.org>
Document interfaces used for VFIO device migration. Added flow
of state changes during live migration with VFIO device.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Co-developed-by: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Tarun Gupta <targupta@nvidia.com>
Message-Id: <20210418122251.88809-1-targupta@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Luis Pires <luis.pires@eldorado.org.br>
Message-Id: <20210601125143.191165-1-luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
- NBD server: Fix crashes related to switching between AioContexts
- file-posix: Workaround for discard/write_zeroes on buggy filesystems
- Follow-up fixes for the reopen vs. permission changes
- quorum: Fix error handling for flush
- block-copy: Refactor copy_range handling
- docs: Describe how to use 'null-co' block driver
-----BEGIN PGP SIGNATURE-----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=gSq/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
- NBD server: Fix crashes related to switching between AioContexts
- file-posix: Workaround for discard/write_zeroes on buggy filesystems
- Follow-up fixes for the reopen vs. permission changes
- quorum: Fix error handling for flush
- block-copy: Refactor copy_range handling
- docs: Describe how to use 'null-co' block driver
# gpg: Signature made Wed 02 Jun 2021 14:44:15 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
docs/secure-coding-practices: Describe how to use 'null-co' block driver
block-copy: refactor copy_range handling
block-copy: fix block_copy_task_entry() progress update
nbd/server: Use drained block ops to quiesce the server
block-backend: add drained_poll
block: improve permission conflict error message
block: simplify bdrv_child_user_desc()
block/vvfat: inherit child_vvfat_qcow from child_of_bds
block: improve bdrv_child_get_parent_desc()
block-backend: improve blk_root_get_parent_desc()
block: document child argument of bdrv_attach_child_common()
block/file-posix: Try other fallbacks after invalid FALLOC_FL_ZERO_RANGE
block/file-posix: Fix problem with fallocate(PUNCH_HOLE) on GPFS
block: drop BlockBackendRootState::read_only
block: drop BlockDriverState::read_only
block: consistently use bdrv_is_read_only()
block/vvfat: fix vvfat_child_perm crash
block/vvfat: child_vvfat_qcow: add .get_parent_aio_context, fix crash
qemu-io-cmds: assert that we don't have .perm requested in no-blk case
block/quorum: Provide .bdrv_co_flush instead of .bdrv_co_flush_to_disk
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Bump minimum versions of some requirements after removing CentOS 7 support
-----BEGIN PGP SIGNATURE-----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=RAkI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2021-06-02' into staging
* Update the references to some doc files (use *.rst instead of *.txt)
* Bump minimum versions of some requirements after removing CentOS 7 support
# gpg: Signature made Wed 02 Jun 2021 08:12:18 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/thuth-gitlab/tags/pull-request-2021-06-02:
configure: bump min required CLang to 6.0 / XCode 10.0
configure: bump min required GCC to 7.5.0
configure: bump min required glib version to 2.56
tests/docker: drop CentOS 7 container
tests/vm: convert centos VM recipe to CentOS 8
crypto: drop used conditional check
crypto: bump min gnutls to 3.5.18, dropping RHEL-7 support
crypto: bump min gcrypt to 1.8.0, dropping RHEL-7 support
crypto: drop back compatibility typedefs for nettle
crypto: bump min nettle to 3.4, dropping RHEL-7 support
patchew: move quick build job from CentOS 7 to CentOS 8 container
block/ssh: Bump minimum libssh version to 0.8.7
docs: fix references to docs/devel/s390-dasd-ipl.rst
docs: fix references to docs/specs/tpm.rst
docs: fix references to docs/devel/build-system.rst
docs: fix references to docs/devel/atomics.rst
docs: fix references to docs/devel/tracing.rst
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Document that security reports must use 'null-co,read-zeroes=on'
because otherwise the memory is left uninitialized (which is an
on-purpose performance feature).
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210601162548.2076631-1-philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 15e8699f00 ("atomics: convert to reStructuredText") converted
docs/devel/atomics.txt to docs/devel/atomics.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/atomics.txt/atomics.rst/ $(git grep -l docs/devel/atomics.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-3-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The default "alabaster" sphinx theme has a couple shortcomings:
- the navbar moves along the page
- the search bar is not always at the same place
- it lacks some contrast and colours
The "rtd" theme from readthedocs.org is a popular third party theme used
notably by the kernel, with a custom style sheet. I like it better,
perhaps others do too. It also simplifies the "Edit on Gitlab" links.
Tweak a bit the custom theme to match qemu.org style, use the
QEMU logo, and favicon etc.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20210323115328.4146052-1-marcandre.lureau@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
It can be tricky to troubleshoot qos-test when a test won't execute. Add
an explanation of how to trace qgraph node connectivity and find which
node has the problem.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210412143437.727560-3-stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Rather than force all structure members to be 'int',
allow the type of the member to be specified.
Reviewed-by: Luis Pires <luis.pires@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Some small documentation updates
* Some small misc fixes
-----BEGIN PGP SIGNATURE-----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=nOMd
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2021-04-01' into staging
* Updates for the MAINTAINERS file
* Some small documentation updates
* Some small misc fixes
# gpg: Signature made Thu 01 Apr 2021 13:30:39 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/thuth-gitlab/tags/pull-request-2021-04-01:
device-crash-test: Ignore errors about a bus not being available
docs: Fix typo in the default name of the qemu-system-x86_64 binary
docs: Remove obsolete paragraph about config-target.mak
util/compatfd.c: Fixed style issues
qom: Fix default values in help
MAINTAINERS: Mark SH-4 hardware emulation orphan
MAINTAINERS: Mark RX hardware emulation orphan
MAINTAINERS: add virtio-fs mailing list
MAINTAINERS: Drop the line with Xiang Zheng
MAINTAINERS: replace Huawei's email to personal one
MAINTAINERS: Drop the lines with Sarah Harris
MAINTAINERS: add/replace backups for some s390 areas
MAINTAINERS: Fix tests/migration maintainers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
V2:
- "tests: Add tests for yank with the chardev-change case" updated
- drop the readthedoc theme patch
-----BEGIN PGP SIGNATURE-----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=UwXe
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/marcandre/tags/for-6.0-pull-request' into staging
For 6.0 misc patches under my radar.
V2:
- "tests: Add tests for yank with the chardev-change case" updated
- drop the readthedoc theme patch
# gpg: Signature made Thu 01 Apr 2021 12:54:52 BST
# gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg: issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/marcandre/tags/for-6.0-pull-request:
tests: Add tests for yank with the chardev-change case
chardev: Fix yank with the chardev-change case
chardev/char.c: Always pass id to chardev_new
chardev/char.c: Move object_property_try_add_child out of chardev_new
yank: Always link full yank code
yank: Remove dependency on qiochannel
docs: simplify each section title
dbus-vmstate: Increase the size of input stream buffer used during load
util: fix use-after-free in module_load_one
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
$TARGET-NAME/config-target.mak has been removed a while ago.
Remove it now from the documentation, too.
Fixes: fdb75aeff7 ("configure: remove target configuration")
Message-Id: <20210316124208.455456-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that we merged into one doc, it makes the nav looks nicer.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210323074704.4078381-1-marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
In an ideal world, we would all get along together very well, always be
polite and never end up in huge conflicts. And even if there are conflicts,
we would always handle each other fair and respectfully. Unfortunately,
this is not an ideal world and sometimes people forget how to interact with
each other in a professional and respectful way. Fortunately, this seldom
happens in the QEMU community, but for such rare cases it is preferrable
to have a basic code of conduct document available to show to people
who are misbehaving. In case that does not help yet, we should also have
a conflict resolution policy ready that can be applied in the worst case.
The Code of Conduct document tries to be short and to the point while
trying to remain friendly and welcoming; it is based on the Fedora Code
of Conduct[1] with extra detail added based on the Contributor Covenant
1.3.0[2]. Other proposals included the Contributor Covenant 1.3.0 itself
or the Django Code of Conduct[3] (which is also a derivative of Fedora's)
but, in any case, there was agreement on keeping the conflict resolution
policy separate from the CoC itself.
An important point is whether to apply the code of conduct to violations
that occur outside public spaces. The text herein restricts that to
individuals acting as a representative or a member of the project or
its community. This is intermediate between the Contributor Covenant
(which only mentions representatives of the community, for example using
an official project e-mail address or posting via an official social media
account), and the Django Code of Conduct, which says that violations of
this code outside these spaces "may" be considered but otherwise applies
no limit.
The conflict resolution policy is based on the Drupal Conflict Resolution
Policy[4] and its derivative, the Mozilla Consequence Ladder[5].
[1] https://www.fedoraproject.com/code-of-conduct/
[2] https://www.contributor-covenant.org/version/1/3/0/code-of-conduct/
[3] https://www.djangoproject.com/conduct/
[4] https://www.drupal.org/conflict-resolution
[5] https://github.com/mozilla/diversity/blob/master/code-of-conduct-enforcement/consequence-ladder.md
Co-developed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This aims to provide a bit more guidance for those who take on one of
our "clean up memory allocation" bite-sized tasks.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210323165308.15244-4-alex.bennee@linaro.org>
We have kerneldoc tags for the headers so we might as well extract
them into our developer documentation whilst we are at it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Aaron Lindsay <aaron@os.amperecomputing.com>
Message-Id: <20210323165308.15244-3-alex.bennee@linaro.org>
Struct members, including command arguments, event data, and union
inline base members, should use '-', not '_'. Enforce this. Fix the
fixable offenders (all in tests/), and add the remainder to pragma
member-name-exceptions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-27-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Command names should be lower-case. Enforce this. Fix the fixable
offenders (all in tests/), and add the remainder to pragma
command-name-exceptions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-25-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Rename pragma returns-whitelist to command-returns-exceptions, and
name-case-whitelist to member-name-case-exceptions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-20-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
With the recent move of the unit tests to tests/unit directory some
instructions under the "Unit tests" section became imprecise, which
are fixed by this change.
Fixes: da668aa15b ("tests: Move unit tests into a separate directory")
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210318174407.2299930-1-wainersm@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The generic 'migrate_set_parameters' command handle all types of param.
Only the QMP commands were documented in the deprecations page, but the
rationale for deprecating applies equally to HMP, and the replacements
exist. Furthermore the HMP commands are just shims to the QMP commands,
so removing the latter breaks the former unless they get re-implemented.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We have several scripts that help build reproducers, but no
documentation for how they should be used. Add some documentation
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Improve current qgraph documentation with a more concrete example
and clearer motivation.
This patch depends on the previous serie
"libqos/qgraph: format qgraph comments for sphinx documentation"
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210301092432.20342-1-eesposit@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Change documentation style and fix minor typos in tests/qtest/libqos/qgraph.h
to automatically generate sphinx documentation in docs/devel/qgraph.rst
The mechanism explanation that once was in qgraph.h is now moved to qgraph.rst
There is no functional change intended.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210308073240.6363-1-eesposit@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a clock_ns_to_ticks() function which does the opposite of
clock_ticks_to_ns(): given a duration in nanoseconds, it returns the
number of clock ticks that would happen in that time. This is useful
for devices that have a free running counter register whose value can
be calculated when it is read.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210219144617.4782-4-peter.maydell@linaro.org
Add a new callback event type ClockPreUpdate, which is called on
period changes before the period is updated.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210219144617.4782-3-peter.maydell@linaro.org
The Clock framework allows users to specify a callback which is
called after the clock's period has been updated. Some users need to
also have a callback which is called before the clock period is
updated.
As the first step in adding support for notifying Clock users on
pre-update events, add an argument to the ClockCallback to specify
what event is being notified, and add an argument to the various
functions for registering a callback to specify which events are
of interest to that callback.
Note that the documentation update renders correct the previously
incorrect claim in 'Adding a new clock' that callbacks "will be
explained in a following section".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210219144617.4782-2-peter.maydell@linaro.org
* target/i386: Add bus lock debug exception support (Chenyi)
* update documentation for preferred boolean option syntax (Daniel)
* make SCSI io_timeout configurable (Hannes)
* fix handling of guest recoverable SCSI errors (myself)
* misc fixes (Pavel, Zheng Zhan Liang, Zihao)
* fix installation of binaries with entitlements (Akihiko)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmA3tzQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMsngf+OkbgTDouxq3qnn1K89n6j2wKlAj0
qPP+57o1sv5u5MjX0BkawXCMJfvTKJaOt/Cs8S0FaPTehfR5H0T2tL76KZBEdlEP
/+V3EC0Qmd1S47LKIOuDkV15szvnccyjpgwaL7Osjb0Eh0SxeXd4pBTc3yYtkacu
zb/srZ63U2iJZr93QwGmEJjuW57WNym6QWXF3Mrg9PFXybkXFTGumB2vZMlQc+MN
RWPTUKZKAiIr/HfdvpIETXY+HzJhylvIQ8OVWtM3XDorl48OWcOat/jyeNEVYgG3
o+gxIRnfvIL+42GkmUFbOKLzT5SV6p9EYYGLTuE1kU7nc6HWoD0CdPxA3A==
=UBVO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging
* fix --enable-fuzzing linker failures (Alexander)
* target/i386: Add bus lock debug exception support (Chenyi)
* update documentation for preferred boolean option syntax (Daniel)
* make SCSI io_timeout configurable (Hannes)
* fix handling of guest recoverable SCSI errors (myself)
* misc fixes (Pavel, Zheng Zhan Liang, Zihao)
* fix installation of binaries with entitlements (Akihiko)
# gpg: Signature made Thu 25 Feb 2021 14:41:56 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini-gitlab/tags/for-upstream: (29 commits)
tcg/i386: rdpmc: fix the the condtions
chardev: do not use short form boolean options in non-QemuOpts character device descriptions
vl: deprecate -writeconfig
target/i386: Add bus lock debug exception support
qom/object.c: Fix typo
target/i386: update to show preferred boolean syntax for -cpu
docs: update to show preferred boolean syntax for -cpu
docs: update to show preferred boolean syntax for -vnc
docs: update to show preferred boolean syntax for -chardev
qemu-options: update to show preferred boolean syntax for -vnc
qemu-options: update to show preferred boolean syntax for -incoming
qemu-options: update to show preferred boolean syntax for -netdev
qemu-options: update to show preferred boolean syntax for -spice
qemu-options: update to show preferred boolean syntax for -chardev
gdbstub: use preferred boolean option syntax
char: don't fail when client is not connected
scsi: drop 'result' argument from command_complete callback
scsi-disk: pass guest recoverable errors through even for rerror=stop
scsi-disk: pass SCSI status to scsi_handle_rw_error
scsi: introduce scsi_sense_from_errno()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The preferred syntax is to use "foo=on|off", rather than a bare
"foo" or "nofoo".
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210216191027.595031-8-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no particular reason to keep this on it's own in the root of
the tree. Move it into the rest of the fine developer manual and fixup
any links to it. The only tweak I've made is to fix the code-block
annotations to mention the language C.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210223095931.16908-1-alex.bennee@linaro.org>
For completeness reference the check-tcg tests in the container
preamble text.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Message-Id: <20210222101455.12640-7-alex.bennee@linaro.org>
This section has grown a little stale so clean-up the language and
examples for current usage:
- refer to containers at the top
- mention podman can also be used
- add podman prerequisites section
- move to using "docker-help" for online help
- mention the registry and it's purpose
- don't refer to out-of-date min-glib image
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210222101455.12640-6-alex.bennee@linaro.org>
Expand on the usage of containers for building tests and why we have
some that are not used to build QEMU itself.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Message-Id: <20210222101455.12640-5-alex.bennee@linaro.org>
This is a plugin intended to help with profiling access to various
bits of system hardware. It only really makes sense for system
emulation.
It takes advantage of the recently exposed helper API that allows us
to see the device name (memory region name) associated with a device.
You can specify arg=read or arg=write to limit the tracking to just
reads or writes (by default it does both).
The pattern option:
-plugin ./tests/plugin/libhwprofile.so,arg=pattern
will allow you to see the access pattern to devices, eg:
gic_cpu @ 0xffffffc010040000
off:00000000, 8, 1, 8, 1
off:00000000, 4, 1, 4, 1
off:00000000, 2, 1, 2, 1
off:00000000, 1, 1, 1, 1
The source option:
-plugin ./tests/plugin/libhwprofile.so,arg=source
will track the virtual source address of the instruction making the
access:
pl011 @ 0xffffffc010031000
pc:ffffffc0104c785c, 1, 4, 0, 0
pc:ffffffc0104c7898, 1, 4, 0, 0
pc:ffffffc010512bcc, 2, 1867, 0, 0
You cannot mix source and pattern.
Finally the match option allow you to limit the tracking to just the
devices you care about.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Message-Id: <20210213130325.14781-4-alex.bennee@linaro.org>
The float-access functions stfl_*, stfq*, ldfl* and ldfq* are now
unused; remove them. (Accesses to float64 and float32 types can be
made with the ldl/stl/ldq/stq functions, as float64 and float32 are
guaranteed to be typedefs for normal integer types.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210208113428.7181-6-peter.maydell@linaro.org>
Message-Id: <20210211122750.22645-15-alex.bennee@linaro.org>
The travis container that we have no longer matches what travis
currently uses. As all x86 jobs are being moved to GitLab CI too,
there is no compelling reason to update the travis container. It
is simpler to just remove it.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210209135011.1224992-2-berrange@redhat.com>
Message-Id: <20210211122750.22645-9-alex.bennee@linaro.org>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 02a68adef99f5df6a380bf8fd7b90948777e411c.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The "🥑 enable" is not necessary and was removed in 9531d26c,
so let's remove from the docs.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210203172357.1422425-4-crosa@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Meson's "static" argument to cc.find_library is a tri-state. By default
Meson *prefers* a shared library, which basically means using -l to
look for it; instead, "static: false" *requires* a shared library. Of
course, "static: true" requires a static library, which is all good
for --enable-static builds.
For --disable-static, "static: false" is rarely desirable; it does not
match what the configure script used to do and the test is more complex
(and harder to debug if it fails, which was reported by Peter Lieven
for librbd).
Reported-by: Peter Lieven <pl@kamp.de>
Tested-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20210117230924.449676-3-alxndr@bu.edu>
The documentation still refers to the makefile and the old sub-directory
layout. Meson works differently: tracetool output is placed into the
builddir with mangled filenames like <builddir>/trace/trace-accel_kvm.h
for the accel/kvm/ trace.h definition.
This meson setup also requires a manually-created accel/kvm/trace.h file
that #includes the <builddir>/trace/trace-accel_kvm.h file. Document
this!
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20210112165859.225534-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It is possible to repeat the --trace option to specify multiple
patterns. This may be preferrable to users who do not want to create a
file with a list of patterns.
Suggested-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210112165859.225534-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Timestamps in tracing output can be distracting. Make it possible to
control tid/timestamp printing with -msg timestamp=on|off. The default
is no tid/timestamps. Previously they were always printed.
Suggested-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210125113507.224287-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The "simple" backend is actually more complicated to use than the "log"
backend. Update the quickstart documentation to feature the "log"
backend instead of the "simple" backend.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20201216160923.722894-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is a simple rST conversion of the documentation.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20201216160923.722894-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The simpletrace documentation section was accidentally split when the
ftrace section was introduced. Move the simpletrace-specific
documentation back into the simpletrace section.
Fixes: e64dd5efb2 ("trace: document ftrace backend")
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20201216160923.722894-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a function for checking whether a clock has a source. This is
useful for devices which have input clocks that must be wired up by
the board as it allows them to fail in realize rather than ploughing
on with a zero-period clock.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-3-peter.maydell@linaro.org
Message-id: 20210121190622.22000-3-peter.maydell@linaro.org
- Fix crash on write to read-only devices
- iotests: Rewrite 'check' in Python, get rid of 'groups' and allow
non-numeric test case names
-----BEGIN PGP SIGNATURE-----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=gFsg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- Fix crash on write to read-only devices
- iotests: Rewrite 'check' in Python, get rid of 'groups' and allow
non-numeric test case names
# gpg: Signature made Wed 27 Jan 2021 19:56:00 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
iotests: rename and move 169 and 199 tests
iotests: rewrite check into python
iotests: add testrunner.py
iotests: add testenv.py
iotests: add findtests.py
iotests: 146: drop extra whitespaces from .out file
virtio-scsi-test: Test writing to scsi-cd device
block: Separate blk_is_writable() and blk_supports_write_perm()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add python script with new logic of searching for tests:
Current ./check behavior:
- tests are named [0-9][0-9][0-9]
- tests must be registered in group file (even if test doesn't belong
to any group, like 142)
Behavior of findtests.py:
- group file is dropped
- tests are all files in tests/ subdirectory (except for .out files),
so it's not needed more to "register the test", just create it with
appropriate name in tests/ subdirectory. Old names like
[0-9][0-9][0-9] (in root iotests directory) are supported too, but
not recommended for new tests
- groups are parsed from '# group: ' line inside test files
- optional file group.local may be used to define some additional
groups for downstreams
- 'disabled' group is used to temporary disable tests. So instead of
commenting tests in old 'group' file you now can add them to
disabled group with help of 'group.local' file
- selecting test ranges like 5-15 are not supported more
(to support restarting failed ./check command from the middle of the
process, new argument is added: --start-from)
Benefits:
- no rebase conflicts in group file on patch porting from branch to
branch
- no conflicts in upstream, when different series want to occupy same
test number
- meaningful names for test files
For example, with digital number, when some person wants to add some
test about block-stream, he most probably will just create a new
test. But if there would be test-block-stream test already, he will
at first look at it and may be just add a test-case into it.
And anyway meaningful names are better.
This commit doesn't update check behavior (which will be done in
further commit), still, the documentation changed like new behavior is
already here. Let's live with this small inconsistency for the
following few commits, until final change.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210125185056.129513-3-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Documented under the "Acceptance tests using the Avocado Framework"
section in testing.rst how environment variables are used to skip tests.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20210115210022.417996-1-wainersm@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When we first converted our documentation to Sphinx, we split it into
multiple manuals (system, interop, tools, etc), which are all built
separately. The primary driver for this was wanting to be able to
avoid shipping the 'devel' manual to end-users. However, this is
working against the grain of the way Sphinx wants to be used and
causes some annoyances:
* Cross-references between documents become much harder or
possibly impossible
* There is no single index to the whole documentation
* Within one manual there's no links or table-of-contents info
that lets you easily navigate to the others
* The devel manual doesn't get published on the QEMU website
(it would be nice to able to refer to it there)
Merely hiding our developer documentation from end users seems like
it's not enough benefit for these costs. Combine all the
documentation into a single manual (the same way that the readthedocs
site builds it) and install the whole thing. The previous manual
divisions remain as the new top level sections in the manual.
* The per-manual conf.py files are no longer needed
* The man_pages[] specifications previously in each per-manual
conf.py move to the top level conf.py
* docs/meson.build logic is simplified as we now only need to run
Sphinx once for the HTML and then once for the manpages5B
* The old index.html.in that produced the top-level page with
links to each manual is no longer needed
Unfortunately this means that we now have to build the HTML
documentation into docs/manual in the build tree rather than directly
into docs/; otherwise it is too awkward to ensure we install only the
built manual and not also the dependency info, stamp file, etc. The
manual still ends up in the same place in the final installed
directory, but anybody who was consulting documentation from within
the build tree will have to adjust where they're looking.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20210115154449.4801-1-peter.maydell@linaro.org
It's common to want to print a human-readable indication of a clock's
frequency. Provide a utility function in the clock API to return a
string which is a displayable representation of the frequency,
and use it in qdev-monitor.c.
Before:
(qemu) info qtree
[...]
dev: xilinx,zynq_slcr, id ""
clock-in "ps_clk" freq_hz=3.333333e+07
mmio 00000000f8000000/0000000000001000
After:
dev: xilinx,zynq_slcr, id ""
clock-in "ps_clk" freq_hz=33.3 MHz
mmio 00000000f8000000/0000000000001000
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201215150929.30311-5-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Remove the now-unused clock_get_ns() API and the CLOCK_PERIOD_TO_NS()
macro that only it was using.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201215150929.30311-4-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The clock_get_ns() API claims to return the period of a clock in
nanoseconds. Unfortunately since it returns an integer and a
clock's period is represented in units of 2^-32 nanoseconds,
the result is often an approximation, and calculating a clock
expiry deadline by multiplying clock_get_ns() by a number-of-ticks
is unacceptably inaccurate.
Introduce a new API clock_ticks_to_ns() which returns the number
of nanoseconds it takes the clock to make a given number of ticks.
This function can do the complete calculation internally and
will thus give a more accurate result.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201215150929.30311-2-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The tracetool.py script writes to stdout. This means the output filename
is not available to the script. Add the output filename to the
command-line so that the script has access to the filename.
This also simplifies the tracetool.py invocation. It's no longer
necessary to use meson's custom_build(capture : true) to save output.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200827142915.108730-2-stefanha@redhat.com>
Build the array of command line arguments coming from config_host
once for all targets. Add all accelerators to accel/Kconfig so
that the command line arguments for accelerators can be computed
easily in the existing "foreach sym: accelerators" loop.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Document how to compile with CFI and how to maintain CFI-safe code
Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Message-Id: <20201204230615.2392-6-dbuono@linux.vnet.ibm.com>
[Make build system section in index.rst and add the new file. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----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=vGLy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-12-19' into staging
QAPI patches patches for 2020-12-19
# gpg: Signature made Sat 19 Dec 2020 09:40:05 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2020-12-19: (33 commits)
qobject: Make QString immutable
block: Use GString instead of QString to build filenames
keyval: Use GString to accumulate value strings
json: Use GString instead of QString to accumulate strings
migration: Replace migration's JSON writer by the general one
qobject: Factor JSON writer out of qobject_to_json()
qobject: Factor quoted_str() out of to_json()
qobject: Drop qstring_get_try_str()
qobject: Drop qobject_get_try_str()
Revert "qobject: let object_property_get_str() use new API"
block: Avoid qobject_get_try_str()
qmp: Fix tracing of non-string command IDs
qobject: Move internals to qobject-internal.h
hw/rdma: Replace QList by GQueue
Revert "qstring: add qstring_free()"
qobject: Change qobject_to_json()'s value to GString
qobject: Use GString instead of QString to accumulate JSON
qobject: Make qobject_to_json_pretty() take a pretty argument
monitor: Use GString instead of QString for output buffer
hmp: Simplify how qmp_human_monitor_command() gets output
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Anywhere we create a list of just one item or by prepending items
(typically because order doesn't matter), we can use
QAPI_LIST_PREPEND(). But places where we must keep the list in order
by appending remain open-coded until later patches.
Note that as a side effect, this also performs a cleanup of two minor
issues in qga/commands-posix.c: the old code was performing
new = g_malloc0(sizeof(*ret));
which 1) is confusing because you have to verify whether 'new' and
'ret' are variables with the same type, and 2) would conflict with C++
compilation (not an actual problem for this file, but makes
copy-and-paste harder).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201113011340.463563-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
[Straightforward conflicts due to commit a8aa94b5f8 "qga: update
schema for guest-get-disks 'dependents' field" and commit a10b453a52
"target/mips: Move mips_cpu_add_definition() from helper.c to cpu.c"
resolved. Commit message tweaked.]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fix typos, and make the example work out of the box.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201217071450.701909-1-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201023151923.3243652-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix the example of add qmp hello-world example.
Without ":", make will report error:
../qapi/misc.json:573:2: line should end with ':'
Signed-off-by: Zihao Chang <changzihao1@huawei.com>
Message-Id: <20201201143308.1626-1-changzihao1@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add a link to the top of the sidebar in every docs page that takes the
user back to the source code in gitlab.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20201102130926.161183-5-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Avocado documentation referred returns 404 error.
Update the broken links.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20201010080741.2932406-1-philmd@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201023150746.107063-13-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Current documentation is not too clear on the GETPC usage.
In particular, when used outside the top level helper function
it causes unexpected behavior.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Message-id: 20201015095147.1691-1-e.emanuelegiuseppe@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that the build is done entirely by Meson, there is no need
to keep the Makefile conversion. Instead, we can ask Ninja about
the targets it exposes and forward them.
The main advantages are, from smallest to largest:
- reducing the possible namespace pollution within the Makefile
- removal of a relatively large Python program
- faster build because parsing Makefile.ninja is slower than
parsing build.ninja; and faster build after Meson runs because
we do not have to generate Makefile.ninja.
- tracking of command lines, which provides more accurate rebuilds
In addition the change removes the requirement for GNU make 3.82, which
was annoying on Mac, and avoids bugs on Windows due to ninjatool not
knowing how to convert Windows escapes to POSIX escapes.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Include the QTest Protocol doc string in docs/devel/qtest.rst,
after converting it to use Sphinx syntax.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201005205228.697463-3-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The qtest and libqtest doc comments will be parsed to generate
API documentation, so move QTest documentation to its own
document where the API and format documentation and will be
included.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201005205228.697463-2-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In two different places, we are not making a cross-reference to some
resource correctly.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20201009161558.107041-2-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Often, QMP command handlers are not only called to handle QMP commands,
but also from a corresponding HMP command handler. In order to give them
a consistent environment, optionally run HMP command handlers in a
coroutine, too.
The implementation is a lot simpler than in QMP because for HMP, we
still block the VM while the coroutine is running.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20201005155855.256490-11-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This patch adds a new 'coroutine' flag to QMP command definitions that
tells the QMP dispatcher that the command handler is safe to be run in a
coroutine.
The documentation of the new flag pretends that this flag is already
used as intended, which it isn't yet after this patch. We'll implement
this in another patch in this series.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-9-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Long code lines don't look good in the rendered documents, make
them shorter.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201003025424.199291-7-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Some code blocks had one extra space, fix that.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201003025424.199291-4-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The list was incorrectly parsed as a literal block due to
indentation.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201003025424.199291-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We have a very frequent pattern of creating a coroutine from a function
with several arguments:
- create a structure to pack parameters
- create _entry function to call original function taking parameters
from struct
- do different magic to handle completion: set ret to NOT_DONE or
EINPROGRESS or use separate bool field
- fill the struct and create coroutine from _entry function with this
struct as a parameter
- do coroutine enter and BDRV_POLL_WHILE loop
Let's reduce code duplication by generating coroutine wrappers.
This patch adds scripts/block-coroutine-wrapper.py together with some
friends, which will generate functions with declared prototypes marked
by the 'generated_co_wrapper' specifier.
The usage of new code generation is as follows:
1. define the coroutine function somewhere
int coroutine_fn bdrv_co_NAME(...) {...}
2. declare in some header file
int generated_co_wrapper bdrv_NAME(...);
with same list of parameters (generated_co_wrapper is
defined in "include/block/block.h").
3. Make sure the block_gen_c declaration in block/meson.build
mentions the file with your marker function.
Still, no function is now marked, this work is for the following
commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200924185414.28642-5-vsementsov@virtuozzo.com>
[Added encoding='utf-8' to open() calls as requested by Vladimir. Fixed
typo and grammar issues pointed out by Eric Blake. Removed clang-format
dependency that caused build test issues.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Move the whole contents of the overview doc comment from object.h
to qom.rst.
This makes the documentation source easier to read and edit, and
also solves the backslash escaping issue at the typecasting macro
examples.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200910221526.10041-10-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Build all executables by default except for the known-broken ones.
This also allows running qemu-iotests without manually building
socket_scm_helper.
Reported-by: Max Reitz <mreitz@redhat.com>
Tested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update the documentation of QAPI document comment syntax to match
the new rST backend requirements. The principal changes are:
* whitespace is now significant, and multiline definitions
must have their second and subsequent lines indented to
match the first line
* general rST format markup is permitted, not just the small
set of markup the old texinfo generator handled. For most
things (notably bulleted and itemized lists) the old format
was the same as rST is.
* Specific things that might trip people up:
- instead of *bold* and _italic_ rST has **bold** and *italic*
- lists need a preceding and following blank line
- a lone literal '*' will need to be backslash-escaped to
avoid a rST syntax error
* the old leading '|' for example (literal text) blocks is
replaced by the standard rST '::' literal block.
* we support arbitrary levels of sub- and sub-sub-heading, not
just a main and sub-heading like the old texinfo generator
* lists can now be nested
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-18-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message improved slightly]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Make the handling of indentation in doc comments more sophisticated,
so that when we see a section like:
Notes: some text
some more text
indented line 3
we save it for the doc-comment processing code as:
some text
some more text
indented line 3
and when we see a section with the heading on its own line:
Notes:
some text
some more text
indented text
we also accept that and save it in the same form.
If we detect that the comment document text is not indented as much
as we expect it to be, we throw a parse error. (We don't complain
about over-indented sections, because for rST this can be legitimate
markup.)
The golden reference for the doc comment text is updated to remove
the two 'wrong' indents; these now form a test case that we correctly
stripped leading whitespace from an indented multi-line argument
definition.
We update the documentation in docs/devel/qapi-code-gen.txt to
describe the new indentation rules.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-6-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Whitespace between sentences tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
clang's C11 atomic_fetch_*() functions only take a C11 atomic type
pointer argument. QEMU uses direct types (int, etc) and this causes a
compiler error when a QEMU code calls these functions in a source file
that also included <stdatomic.h> via a system header file:
$ CC=clang CXX=clang++ ./configure ... && make
../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid)
Avoid using atomic_*() names in QEMU's atomic.h since that namespace is
used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h
and <stdatomic.h> can co-exist. I checked /usr/include on my machine and
searched GitHub for existing "qatomic_" users but there seem to be none.
This patch was generated using:
$ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \
sort -u >/tmp/changed_identifiers
$ for identifier in $(</tmp/changed_identifiers); do
sed -i "s%\<$identifier\>%q$identifier%g" \
$(git grep -I -l "\<$identifier\>")
done
I manually fixed line-wrap issues and misaligned rST tables.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
I found that there are many spelling errors in the comments of qemu,
so I used the spellcheck tool to check the spelling errors
and finally found some spelling errors in the docs folder.
Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200917075029.313-4-zhaolichang@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We have an exploding complexity problem in the testing so lets just
move the more involved plugins into contrib. tests/plugins still exist
for the basic plugins that exercise the API. We restore the old
pre-meson style Makefile for contrib as it also doubles as a guide for
out-of-tree plugin builds.
While we are at it add some examples to the documentation and a
specific plugins build target.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200909112742.25730-11-alex.bennee@linaro.org>
Most of the Makefile bits are obsolete and can be removed.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Section markup in definition documentation makes no sense and can
produce invalid Texinfo. Reject.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200320091805.5585-2-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Currently QAPI generates a type and function for free'ing it:
typedef struct QCryptoBlockCreateOptions QCryptoBlockCreateOptions;
void qapi_free_QCryptoBlockCreateOptions(QCryptoBlockCreateOptions *obj);
This is used in the traditional manner:
QCryptoBlockCreateOptions *opts = NULL;
opts = g_new0(QCryptoBlockCreateOptions, 1);
....do stuff with opts...
qapi_free_QCryptoBlockCreateOptions(opts);
Since bumping the min glib to 2.48, QEMU has incrementally adopted the
use of g_auto/g_autoptr. This allows the compiler to run a function to
free a variable when it goes out of scope, the benefit being the
compiler can guarantee it is freed in all possible code ptahs.
This benefit is applicable to QAPI types too, and given the seriously
long method names for some qapi_free_XXXX() functions, is much less
typing. This change thus makes the code generator emit:
G_DEFINE_AUTOPTR_CLEANUP_FUNC(QCryptoBlockCreateOptions,
qapi_free_QCryptoBlockCreateOptions)
The above code example now becomes
g_autoptr(QCryptoBlockCreateOptions) opts = NULL;
opts = g_new0(QCryptoBlockCreateOptions, 1);
....do stuff with opts...
Note, if the local pointer needs to live beyond the scope holding the
variable, then g_steal_pointer can be used. This is useful to return the
pointer to the caller in the success codepath, while letting it be freed
in all error codepaths.
return g_steal_pointer(&opts);
The crypto/block.h header needs updating to avoid symbol clash now that
the g_autoptr support is a standard QAPI feature.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200723153845.2934357-1-berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We do not need to ask cmake for the dependencies, so just use the
pkg-config mechanism. Keep "auto" for SDL so that it tries using
sdl-config too.
The documentation is adjusted to use SDL2_image as the example,
rather than SDL which does not use the "pkg-config" method.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The binaries move to the root directory, e.g. qemu-system-i386 or
qemu-arm. This requires changes to qtests, CI, etc.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This shows how to do some "computations" in meson.build using its array
and dictionary data structures, and also a basic usage of the sourceset
module for conditional compilation.
Notice the new "if have_system" part of util/meson.build, which fixes
a bug in the old build system was buggy: util/dbus.c was built even for
non-softmmu builds, but the dependency on -lgio was lost when the linking
was done through libqemuutil.a. Because all of its users required gio
otherwise, the bug was hidden. Meson instead propagates libqemuutil's
dependencies down to its users, and shows the problem.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When support for this feature went in, the update to the
documentation was forgotten.
Fixes: 067e8b0f45
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200803205708.315829-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200706195534.14962-5-alxndr@bu.edu>
[thuth: Replaced --enable-sanitizers with --enable-fuzzing]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200706195534.14962-3-alxndr@bu.edu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Review comment came just too late ;-)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200713200415.26214-9-alex.bennee@linaro.org>
Fix typo - the option is called "--fuzz-target" and not "--fuzz_taget".
Also use a different fuzzer in the example, since "virtio-net-fork-fuzz"
does not seem to be a valid fuzzer target (anymore?).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200709084059.22539-1-thuth@redhat.com>
This attempts to bring together my understanding of the requirements
for icount behaviour into one reference document for our developer
notes.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Pavel Dovgalyuk <dovgaluk@ispras.ru>
Cc: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200709141327.14631-3-alex.bennee@linaro.org>
Do a light conversion to .rst and clean-up some of the language at the
start now MTTCG has been merged for a while.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200709141327.14631-2-alex.bennee@linaro.org>
Use visitor functions' return values to check for failure. Eliminate
error_propagate() that are now unnecessary. Delete @err that are now
unused.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-41-armbru@redhat.com>
See recent commit "error: Document Error API usage rules" for
rationale.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-18-armbru@redhat.com>
Adds TSan details to testing.rst.
This includes background and reference details on TSan,
and details on how to build and test with TSan
both with and without docker.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200609200738.445-13-robert.foley@linaro.org>
Message-Id: <20200612190237.30436-16-alex.bennee@linaro.org>
We currently have target-endian versions of these operations,
but no easy way to force a specific endianness. This can be
helpful if the target has endian-specific operations, or a mode
that swaps endianness.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200508154359.7494-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Explain how to use analyze-migration.py, this may help.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200330174852.456148-1-marcandre.lureau@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add the documentation about the clock inputs and outputs in devices.
This is based on the original work of Frederic Konrad.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20200406135251.157596-6-damien.hedde@greensocs.com
[PMM: Editing pass for minor grammar, style and Sphinx
formatting fixes]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For QMP commands without arguments, gen_marshal() laboriously
generates a qmp_marshal_FOO() that copes with null @args. Turns
there's just one caller that passes null instead of an empty QDict.
Adjust that caller, and simplify gen_marshal().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200424084338.26803-15-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-7-armbru@redhat.com>
Some of the constraints on operand sizes have been relaxed, so adjust the
documentation.
Deprecate atomic_mb_read and atomic_mb_set; it is not really possible to
use them correctly because they do not interoperate with sequentially-consistent
RMW operations.
Finally, extend the memory barrier pairing section to cover acquire and
release semantics in general, roughly based on the KVM Forum 2016 talk,
"<atomic.h> weapons".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unlike regular feature flags, the new special feature flag
"deprecated" is recognized by the QAPI generator. For now, it's only
permitted with commands, events, and struct members. It will be put
to use shortly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200317115459.31821-26-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Doc typo fixed]
In v4.1.0, we added feature flags just to struct types (commit
6a8c0b5102^..f3ed93d545), to satisfy an immediate need (commit
c9d4070991 "file-posix: Add dynamic-auto-read-only QAPI feature"). In
v4.2.0, we added them to commands (commit 23394b4c39 "qapi: Add
feature flags to commands") to satisfy another immediate need (commit
d76744e65e "qapi: Allow introspecting fix for savevm's cooperation
with blockdev").
Add them to the remaining definitions: enumeration types, union types,
alternate types, and events.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200317115459.31821-13-armbru@redhat.com>
Commit 6a8c0b5102 "qapi: Add feature flags to struct types" neglected
to update section "Client JSON Protocol introspection", and commit
23394b4c39 "qapi: Add feature flags to commands" didn't either. Make
up for that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200317115459.31821-5-armbru@redhat.com>
Mention SchemaInfo variant member "allow-oob" defaults to false.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200317115459.31821-4-armbru@redhat.com>
An ALTERNATIVE's value can only be a type name. Arrays are not
supported, yet. The text gets it right: "The form STRING is shorthand
for { 'type': STRING }." The grammar doesn't. Fix it.
Fixes: b6c37ebaaf
Reported-by: John Snow <jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200309142638.19988-1-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
The company 'Arm' went through a rebranding some years back
involving a recapitalization from 'ARM' to 'Arm'. As a result
our documentation is a bit inconsistent between the two forms.
It's not worth trying to update everywhere in QEMU, but it's
easy enough to make docs/ consistent.
Note that "ARMv8" and similar architecture names, and
older CPU names like "ARM926" still retain all-caps.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20200309215818.2021-6-peter.maydell@linaro.org
While at it, also fix the numbering in 'What QEMU does'.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200213162942.14177-2-cohuck@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
I forgot to document the lifetime of handles in the developer
documentation. Do so now.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Message-Id: <20200225124710.14152-11-alex.bennee@linaro.org>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200220041118.23264-23-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The qtests have recently been moved to a separate subdirectory, so
the paths that are mentioned in the documentation have to be adjusted
accordingly. And some of the iotests are now always run as part of
"make check", so this information has to be adjusted here, too.
Message-Id: <20200122134511.23806-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Instead of recommending checking the TRACE_FOO_ENABLED macro to
skip expensive computations needed only for tracing, recommend
only using trace_event_get_state_backends(). This works for both
compile-time and run-time disabling of events, and has no extra
performance impact if the event is compile-time disabled.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200120151142.18954-2-peter.maydell@linaro.org
Message-Id: <20200120151142.18954-2-peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This finishes the new interface began with the previous patch.
Document the interface and deprecate MMU_MODE<N>_SUFFIX.
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are no uses of the *_cmmu names other than the bare wrapping
within the *_code inlines. Therefore rename the functions so we
can drop the inlines.
Use abi_ptr instead of target_ulong in preparation for user-only;
the two types are identical for softmmu.
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Having to include qapi-commands.h just for qmp_init_marshal() is
suboptimal. Generate it into separate files. This lets
monitor/misc.c, qga/main.c, and the generated qapi-commands-FOO.h
include less.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191120182551.23795-4-armbru@redhat.com>
[Typos in docs/devel/qapi-code-gen.txt fixed]
Reviewed-by: Eric Blake <eblake@redhat.com>
- test tci with Travis
- enable multiarch testing in Travis
- default to out-of-tree builds
- make changing logfile safe via RCU
- remove redundant tests
- remove gtester test from docker
- convert DEBUG_MMAP to tracepoints
- remove hand rolled glob function
- trigger tcg re-configure when needed
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl37M6gACgkQ+9DbCVqe
KkQ0Rwf/d0lGDPQN1Uf0zqZRQQmDCqWVuqHhZJ5xWDjbyVT2eUwR07TvNZeUKEWX
iO+u6S7Tv91oLjZN5WjhaiuSjtJaEzCdcpkIJAWXLP/lzse37HEwvLBsdg71y+46
LNvBrJRPpQotdb7fjr8RgCwc1qg2Bz15ekSn7XIA175zTMmUsshLJBVhLbGNqrVm
F2UmjB9oFJ0+nzrcEnpFmWw7xvVrX1dImZXv5C2pvuHF7efSjGwiFviTRZgDjOGs
V7HiWRV1QcgTigncncxTMbhMTKTVKK+e7O+y0DZWt/NSrT/yLDy5rcwySpmvu6C+
cRmh/0tMo1KAhiz8Xy8LookhVj6hdA==
=OAkV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-tesing-and-misc-191219-1' into staging
Various testing and logging updates
- test tci with Travis
- enable multiarch testing in Travis
- default to out-of-tree builds
- make changing logfile safe via RCU
- remove redundant tests
- remove gtester test from docker
- convert DEBUG_MMAP to tracepoints
- remove hand rolled glob function
- trigger tcg re-configure when needed
# gpg: Signature made Thu 19 Dec 2019 08:24:08 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-tesing-and-misc-191219-1: (25 commits)
tests/tcg: ensure we re-configure if configure.sh is updated
trace: replace hand-crafted pattern_glob with g_pattern_match_simple
linux-user: convert target_munmap debug to a tracepoint
linux-user: log page table changes under -d page
linux-user: add target_mmap_complete tracepoint
linux-user: convert target_mmap debug to tracepoint
linux-user: convert target_mprotect debug to tracepoint
travis.yml: Remove the redundant clang-with-MAIN_SOFTMMU_TARGETS entry
docker: gtester is no longer used
Added tests for close and change of logfile.
Add use of RCU for qemu_logfile.
qemu_log_lock/unlock now preserves the qemu_logfile handle.
Add a mutex to guarantee single writer to qemu_logfile handle.
Cleaned up flow of code in qemu_set_log(), to simplify and clarify.
Fix double free issue in qemu_set_log_filename().
ci: build out-of-tree
travis.yml: Enable builds on arm64, ppc64le and s390x
tests/test-util-filemonitor: Skip test on non-x86 Travis containers
tests/hd-geo-test: Skip test when images can not be created
iotests: Skip test 079 if it is not possible to create large files
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
By default VM build test use qemu-img from system's PATH to
create the image disk. Due the lack of qemu-img on the system
or the desire to simply use a version built with QEMU, it would
be nice to allow one to set its path. So this patch makes that
possible by reading the path to qemu-img from QEMU_IMG if set,
otherwise it fallback to default behavior.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Message-Id: <20191114134246.12073-2-wainersm@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Create a bitops.rst which is just a container for the
kernel-doc comments in qemu/bitops.h.
This is mostly a test of the kernel-doc extension machinery.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20190521122519.12573-7-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The same way the arch tag is being used as a fallback for the arch
parameter, let's do the same for QEMU's machine and avoid some boiler
plate code.
This is now possible because, since Avocado 72.0, it's possible to use
tags with names that match the machine types on QEMU.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20191104151323.9883-4-crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
While we are at it fix up the quoted code sections with the inline ::
approach.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
This makes it a bit clearer what this is about.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This is mostly extracted from Emilio's more verbose commit comments
with some additional verbiage from me.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Similarly to features for struct types introduce the feature flags also
for commands. This will allow notifying management layers of fixes and
compatible changes in the behaviour of a command which may not be
detectable any other way.
The changes were heavily inspired by commit 6a8c0b5102.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191018081454.21369-3-armbru@redhat.com>
tracetool needs to know the group name ("all", "root", or a specific
subdirectory). Also remove the stdin redirection because tracetool.py
needs the path to the trace-events file. Update the documentation.
Fixes: 2098c56a9b
("trace: move setting of group name into Makefiles")
Buglink: https://bugs.launchpad.net/bugs/1844814
Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20191009135154.10970-1-stefanha@redhat.com>
RCU_READ_LOCK_GUARD() takes the rcu_read_lock and then uses glib's
g_auto infrastructure (and thus whatever the compiler's hooks are) to
release it on all exits of the block.
WITH_RCU_READ_LOCK_GUARD() is similar but is used as a wrapper for the
lock, i.e.:
WITH_RCU_READ_LOCK_GUARD() {
stuff under lock
}
Note the 'unused' attribute is needed to work around clang bug:
https://bugs.llvm.org/show_bug.cgi?id=43482
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20191007143642.301445-2-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It was pointed out we haven't documented the check-tcg part of the
build system. Attempt to rectify that now.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We represent the parse tree as OrderedDict. We fetch optional dict
members with .get(). So far, so good.
We represent null literals as None. .get() returns None both for
"absent" and for "present, value is the null literal". Uh-oh.
Test features-if-invalid exposes this bug: "'if': null" is
misinterpreted as absent "if".
We added null to the schema language to "allow [...] an explicit
default value" (commit e53188ada5 "qapi: Allow true, false and null in
schema json", v2.4.0). Hasn't happened; null is still unused except
as generic invalid value in tests/.
To fix, we'd have to replace .get() by something more careful, or
represent null differently. Feasible, but we got more and bigger fish
to fry right now. Remove the null literal from the schema language.
Replace null in tests by another invalid value.
Test features-if-invalid now behaves as it should.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190914153506.2151-10-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
