It is possible to hit the assertTrue(delta_t < 2.0) on very loaded
systems. Increase the value to 5.0 to ease the situation a little bit.
Message-Id: <20220802123101.430757-1-thuth@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Thomas Huth <thuth@redhat.com>
qemu-iotests fails in the following setup:
./configure --enable-modules --enable-smartcard \
--target-list=x86_64-softmmu,s390x-softmmu
make
cd build
QEMU_PROG=`pwd`/s390x-softmmu/qemu-system-s390x \
../tests/check-block.sh qcow2
...
--- /home/crobinso/src/qemu/tests/qemu-iotests/127.out
+++ /home/crobinso/src/qemu/build/tests/qemu-iotests/scratch/127.out.bad
@@ -1,4 +1,18 @@
QA output created by 127
+Failed to open module: /home/crobinso/src/qemu/build/hw-usb-smartcard.so: undefined symbol: ccid_card_ccid_attach
...
--- /home/crobinso/src/qemu/tests/qemu-iotests/267.out
+++ /home/crobinso/src/qemu/build/tests/qemu-iotests/scratch/267.out.bad
@@ -1,4 +1,11 @@
QA output created by 267
+Failed to open module: /home/crobinso/src/qemu/build/hw-usb-smartcard.so: undefined symbol: ccid_card_ccid_attach
The stderr spew is its own known issue, but seems like iotests should
be discarding stderr in this case.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test an allocating write to a parallels image that has a backing node.
Before HEAD^, doing so used to give me a failed assertion (when the
backing node contains only `42` bytes; the results varies with the value
chosen, for `0` bytes, for example, all I get is EIO).
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-Id: <20220714132801.72464-3-hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
e7874a50ff ("python: update for mypy 0.950") has added
`warn_unused_ignores = False` to python/setup.cfg, to be able to keep
compatibility with both pre- and post-0.950 mypy versions.
The iotests' mypy.ini needs the same, or 297 will fail (on both pre- and
post-0.950 mypy, as far as I can tell; just for different `ignore`
lines).
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220621092536.19837-1-hreitz@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
In certain container environments we may not have FUSE at all, so skip
the test in this circumstance too.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20220616142659.3184115-3-jsnow@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Fixes: 58a6fdcc
Signed-off-by: John Snow <jsnow@redhat.com>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220616142659.3184115-2-jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Declare that we need copy-before-write filter to avoid failure when
filter is not whitelisted.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220706170834.242277-1-vsementsov@yandex-team.ru>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
strerror() represents ETIMEDOUT a bit different in Linux and macOS /
FreeBSD. Let's support the latter too.
Fixes: 9d05a87b77 ("iotests: copy-before-write: add cases for cbw-timeout option")
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220705153708.186418-1-vsementsov@yandex-team.ru>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add two simple test-cases: timeout failure with
break-snapshot-on-cbw-error behavior and similar with
break-guest-write-on-cbw-error behavior.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Add tests for new option of copy-before-write filter: on-cbw-error.
Note that we use QEMUMachine instead of VM class, because in further
commit we'll want to use throttling which doesn't work with -accel
qtest used by VM.
We also touch pylintrc to not break iotest 297.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
[vsementsov: add arguments to QEMUMachine constructor]
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
common.rc has some complicated logic to find the common.config that
dates back to xfstests and is completely unnecessary now. Just include
the contents of the file.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220505094723.732116-1-pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
According to the NBD spec, a server that advertises
NBD_FLAG_CAN_MULTI_CONN promises that multiple client connections will
not see any cache inconsistencies: when properly separated by a single
flush, actions performed by one client will be visible to another
client, regardless of which client did the flush.
We always satisfy these conditions in qemu - even when we support
multiple clients, ALL clients go through a single point of reference
into the block layer, with no local caching. The effect of one client
is instantly visible to the next client. Even if our backend were a
network device, we argue that any multi-path caching effects that
would cause inconsistencies in back-to-back actions not seeing the
effect of previous actions would be a bug in that backend, and not the
fault of caching in qemu. As such, it is safe to unconditionally
advertise CAN_MULTI_CONN for any qemu NBD server situation that
supports parallel clients.
Note, however, that we don't want to advertise CAN_MULTI_CONN when we
know that a second client cannot connect (for historical reasons,
qemu-nbd defaults to a single connection while nbd-server-add and QMP
commands default to unlimited connections; but we already have
existing means to let either style of NBD server creation alter those
defaults). This is visible by no longer advertising MULTI_CONN for
'qemu-nbd -r' without -e, as in the iotest nbd-qemu-allocation.
The harder part of this patch is setting up an iotest to demonstrate
behavior of multiple NBD clients to a single server. It might be
possible with parallel qemu-io processes, but I found it easier to do
in python with the help of libnbd, and help from Nir and Vladimir in
writing the test.
Signed-off-by: Eric Blake <eblake@redhat.com>
Suggested-by: Nir Soffer <nsoffer@redhat.com>
Suggested-by: Vladimir Sementsov-Ogievskiy <v.sementsov-og@mail.ru>
Message-Id: <20220512004924.417153-3-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When running I/O tests using TAP output mode, we get a single TAP test
with a sub-test reported for each I/O test that is run. The output looks
something like this:
1..123
ok qcow2 011
ok qcow2 012
ok qcow2 013
ok qcow2 217
...
If everything runs or fails normally this is fine, but periodically we
have been seeing the test harness abort early before all 123 tests have
been run, just leaving a fairly useless message like
TAP parsing error: Too few tests run (expected 123, got 107)
we have no idea which tests were running at the time the test harness
abruptly exited. This change causes us to print a message about our
intent to run each test, so we have a record of what is active at the
time the harness exits abnormally.
1..123
# running qcow2 011
ok qcow2 011
# running qcow2 012
ok qcow2 012
# running qcow2 013
ok qcow2 013
# running qcow2 217
ok qcow2 217
...
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220509124134.867431-2-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When stdout is not a terminal, the buffer may not be flushed at each end
of line, so we should flush after each test is done. This is especially
apparent when run by check-block, in two ways:
First, when running make check-block -jX with X > 1, progress indication
was missing, even though testrunner.py does theoretically print each
test's status once it has been run, even in multi-processing mode.
Flushing after each test restores this progress indication.
Second, sometimes make check-block failed altogether, with an error
message that "too few tests [were] run". I presume that's because one
worker process in the job pool did not get to flush its stdout before
the main process exited, and so meson did not get to see that worker's
test results. In any case, by flushing at the end of run_test(), the
problem has disappeared for me.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220506134215.10086-1-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This should work for all format drivers that support reopening, so test
it.
(This serves as a regression test for HEAD^: This test used to fail for
VMDK before HEAD^.)
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220314162719.65384-3-hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Create a VM with a BDS in an iothread, add -incoming defer to the
command line, and then export this BDS via NBD. Doing so should not
fail an assertion.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220427114057.36651-5-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add simple test that new interface introduced in previous commit works.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Message-Id: <20220314213226.362217-4-v.sementsov-og@mail.ru>
[eblake: Adjust S-o-b to Vladimir's new email, with permission]
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
FUSE exports' allow-other option defaults to "auto", which means that it
will try passing allow_other as a mount option, and fall back to not
using it when an error occurs. We make no effort to hide fusermount's
error message (because it would be difficult, and because users might
want to know about the fallback occurring), and so when allow_other does
not work (primarily when /etc/fuse.conf does not contain
user_allow_other), this error message will appear and break the
reference output.
We do not need allow_other here, though, so we can just pass
allow-other=off to fix that.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220421142435.569600-1-hreitz@redhat.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Just like qemu_img_log(), upgrade qemu_io_log() to enforce a return code
of zero by default.
Tests that use qemu_io_log(): 242 245 255 274 303 307 nbd-reconnect-on-open
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-13-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Like qemu-img, qemu-io returning 0 should be the norm and not the
exception. Remove all calls to qemu_io_silent that just assert the
return code is zero (That's every last call, as it turns out), and
replace them with a normal qemu_io() call.
qemu_io_silent_check() appeared to have been unused already.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-12-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
I know we just added it, sorry. This is done in favor of qemu_io() which
*also* returns the console output and status, but with more robust error
handling on failure.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-11-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
This test expects failure ... but only sometimes. When? Why?
It's for reads of a region not defined by a bitmap. Adjust the test to
be more explicit about what it expects to fail and why.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-10-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Modify this test to use assertRaises for its negative testing of
qemu_io. If the exception raised does not match the one we tell it to
expect, we get *that* exception unhandled. If we get no exception, we
get a unittest assertion failure and the provided emsg printed to
screen.
If we get the CalledProcessError exception but the output is not what we
expect, we re-raise the original CalledProcessError.
Tidy.
(Note: Yes, you can reference "with" objects after that block ends; it
just means that ctx.__exit__(...) will have been called on it. It does
not *actually* go out of scope. unittests expects you to want to inspect
the Exception object, so they leave it defined post-exit.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-9-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
reimplement qemu_img() in terms of qemu_tool() in preparation for doing
the same with qemu_io().
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-7-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Without this change, asserting that qemu_io always returns 0 causes this
test to fail in a way we happened not to be catching previously:
qemu.utils.VerboseProcessError: Command
'('/home/jsnow/src/qemu/bin/git/tests/qemu-iotests/../../qemu-io',
'--cache', 'writeback', '--aio', 'threads', '-f', 'qcow2', '-c',
'read -P 4 3M 1M',
'/home/jsnow/src/qemu/bin/git/tests/qemu-iotests/scratch/3.img')'
returned non-zero exit status 1.
┏━ output ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
┃ qemu-io: can't open device
┃ /home/jsnow/src/qemu/bin/git/tests/qemu-iotests/scratch/3.img:
┃ Could not open backing file: Could not open backing file: Throttle
┃ group 'tg' does not exist
┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
The commit jobs changes the backing file string stored in the image file
header belonging to the node above the commit’s top node to point to the
commit target (the base node). QEMU tries to be as accurate as
possible, and so in these test cases will include the filter that is
part of the block graph in that backing file string (by virtue of making
it a json:{} description of the post-commit subgraph). This makes
little sense outside of QEMU, though: Specifically, the throttle node in
that subgraph will dearly miss its supposedly associated throttle group
object.
When starting the commit job, we can specify a custom backing file
string to write into said image file, so let’s use that feature to write
the plain filename of the backing chain’s next actual image file there.
Explicitly provide the backing file so that opening the file outside of
QEMU (Where we will not have throttle groups) will succeed.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20220418211504.943969-6-jsnow@redhat.com>
qemu-io fails on read/write beyond end-of-file on raw images, so skip
these invocations when running the zero-length image tests.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-5-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
A forthcoming commit updates qemu_io() to raise an exception on non-zero
return by default, and changes its return type.
In preparation, simplify some calls to qemu_io() that assert that
specific error message strings do not appear in qemu-io's
output. Asserting that all of these calls return a status code of zero
will be a more robust way to guard against failure.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-4-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
The 'read' commands to qemu-io were malformed, and this invocation only
worked by coincidence because the error messages were identical. Oops.
There's no point in checking the patterning of the reference image, so
just check the empty image by itself instead.
(Note: as of this commit, nothing actually enforces that this command
completes successfully, but a forthcoming commit in this series will
enforce that qemu_io() must have a zero status code.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-3-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
This makes these callsites a little simpler, but the real motivation is
a forthcoming commit will change the return type of qemu_io(), so removing
users of the return value now is helpful.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220418211504.943969-2-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Now that we are fully switched over to the new QMP library, move it back
over the old namespace. This is being done primarily so that we may
upload this package simply as "qemu.qmp" without introducing confusion
over whether or not "aqmp" is a new protocol or not.
The trade-off is increased confusion inside the QEMU developer
tree. Sorry!
Note: the 'private' member "_aqmp" in legacy.py also changes to "_qmp";
not out of necessity, but just to remove any traces of the "aqmp"
name.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Acked-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org>
Message-id: 20220330172812.3427355-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
iotests is already using async QMP, but to finalize the switchover we
only need to update any remaining import paths to rely solely on the new
library instead.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Acked-by: Hanna Reitz <hreitz@redhat.com>
Message-id: 20220321203315.909411-5-jsnow@redhat.com
[Fixed minor rebase conflict. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
We don't have to maintain compatibility with both QMP libraries anymore,
so we can just remove the old exception. While we're here, take
advantage of the extra fields present in the VMLaunchFailure exception
that machine.py now raises.
(Note: I'm leaving the logging suppression here unchanged. I had
suggested previously we use filters to scrub the PID out of the logging
information so it could just be diffed as part of the iotest output, but
that meant *always* scrubbing PID from logger output, which defeated the
point of even offering that information in the output to begin with.
Ultimately, I decided it's fine to just suppress the logger temporarily.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Hanna Reitz <hreitz@redhat.com>
Message-id: 20220321203315.909411-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
One clear problem with how qcow2's refcount structure rebuild algorithm
used to be before "qcow2: Improve refcount structure rebuilding" was
that it is prone to failure for qcow2 images on block devices: There is
generally unused space after the actual image, and if that exceeds what
one refblock covers, the old algorithm would invariably write the
reftable past the block device's end, which cannot work. The new
algorithm does not have this problem.
Test it with three tests:
(1) Create an image with more empty space at the end than what one
refblock covers, see whether rebuilding the refcount structures
results in a change in the image file length. (It should not.)
(2) Leave precisely enough space somewhere at the beginning of the image
for the new reftable (and the refblock for that place), see whether
the new algorithm puts the reftable there. (It should.)
(3) Test the original problem: Create (something like) a block device
with a fixed size, then create a qcow2 image in there, write some
data, and then have qemu-img check rebuild the refcount structures.
Before HEAD^, the reftable would have been written past the image
file end, i.e. outside of what the block device provides, which
cannot work. HEAD^ should have fixed that.
("Something like a block device" means a loop device if we can use
one ("sudo -n losetup" works), or a FUSE block export with
growable=false otherwise.)
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220405134652.19278-3-hreitz@redhat.com>
303 runs two test cases, one of which requires zstd support.
Unfortunately, given that this is not a unittest-style test, we cannot
easily skip that single case, and instead can only skip the whole test.
(Alternatively, we could split this test into a zlib and a zstd part,
but that seems excessive, given that this test is not in auto and thus
likely only run by developers who have zstd support compiled in.)
Fixes: 677e0bae68 ("iotest 303: explicit compression type")
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <v.sementsov-og@mail.ru>
Message-Id: <20220323105522.53660-4-hreitz@redhat.com>
Some test cases run in iotest 065 want to run with zstd compression just
for added coverage. Run them with zlib if there is no zstd support
compiled in.
Reported-by: Thomas Huth <thuth@redhat.com>
Fixes: 12a936171d ("iotest 065: explicit compression type")
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220323105522.53660-3-hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <v.sementsov-og@mail.ru>
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220323105522.53660-2-hreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <v.sementsov-og@mail.ru>
We want to get rid of check-block.sh in the long run, so let's move
the checks for the bash version and sanitizers from check-block.sh
into the meson.build file instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220223093840.2515281-4-thuth@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
By using subdir_done(), we can get rid of one level of indentation
in this file. This will make it easier to add more conditions to
skip the iotests in future patches.
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220223093840.2515281-3-thuth@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
An iotest's 'paused' condition is fickle; it will be reported as true
whenever the job is drained, for example, or when it is in the process
of completing.
030 and 041 contain such checks, we should replace them by checking the
job status instead. (As was done for 129 in commit f9a6256b48
for the 'busy' condition.)
Additionally, when we want to test that a job is paused on error, we
might want to give it some time to actually switch to the paused state.
Do that by waiting on the corresponding JOB_STATUS_CHANGE event. (But
only if they are not already paused; the loops these places are in fetch
all VM events, so they may have already fetched that event from the
queue.)
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220324180221.24508-1-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
When the stream block job cuts out the nodes between top and base in
stream_prepare(), it does not drain the subtree manually; it fetches the
base node, and tries to insert it as the top node's backing node with
bdrv_set_backing_hd(). bdrv_set_backing_hd() however will drain, and so
the actual base node might change (because the base node is actually not
part of the stream job) before the old base node passed to
bdrv_set_backing_hd() is installed.
This has two implications:
First, the stream job does not keep a strong reference to the base node.
Therefore, if it is deleted in bdrv_set_backing_hd()'s drain (e.g.
because some other block job is drained to finish), we will get a
use-after-free. We should keep a strong reference to that node.
Second, even with such a strong reference, the problem remains that the
base node might change before bdrv_set_backing_hd() actually runs and as
a result the wrong base node is installed.
Both effects can be seen in 030's TestParallelOps.test_overlapping_5()
case, which has five nodes, and simultaneously streams from the middle
node to the top node, and commits the middle node down to the base node.
As it is, this will sometimes crash, namely when we encounter the
above-described use-after-free.
Taking a strong reference to the base node, we no longer get a crash,
but the resuling block graph is less than ideal: The expected result is
obviously that all middle nodes are cut out and the base node is the
immediate backing child of the top node. However, if stream_prepare()
takes a strong reference to its base node (the middle node), and then
the commit job finishes in bdrv_set_backing_hd(), supposedly dropping
that middle node, the stream job will just reinstall it again.
Therefore, we need to keep the whole subtree drained in
stream_prepare(), so that the graph modification it performs is
effectively atomic, i.e. that the base node it fetches is still the base
node when bdrv_set_backing_hd() sets it as the top node's backing node.
Verify this by asserting in said 030's test case that the base node is
always the top node's immediate backing child when both jobs are done.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220324140907.17192-1-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Vladimir Sementsov-Ogievskiy <v.sementsov-og@mail.ru>
Quite a few of these tests have stale contact information. This patch
updates the stale ones that I happen to be aware of at the moment.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20220322174212.1169630-1-jsnow@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Commit e3296cc796 made the ssh block
driver's error message for fingerprint mismatches more verbose, so it
now prints the actual host key fingerprint and the key type.
iotest 207 tests such errors, but was not amended to filter that
fingerprint (which is host-specific), so do it now. Filter the key
type, too, because I guess this too can differ depending on the host
configuration.
Fixes: e3296cc796
("block: print the server key type and fingerprint on failure")
Reported-by: John Snow <jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220318125304.66131-3-hreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Allow filters for VM.run_job(), and pass the filters given to
VM.blockdev_create() to it.
(Use this opportunity to annotate VM.run_job()'s parameter types;
unfortunately, for the filter, I could not come up with anything better
than Callable[[Any], Any] that would pass mypy's scrutiny.)
At one point, a plain string is logged, so the filters passed to it must
work fine with plain strings. The only filters passed to it at this
point are the ones from VM.blockdev_create(), which are
filter_qmp_test_files() (by default) and 207's filter_hash(). Both
cannot handle plain strings yet, but we can make them by amending
filter_qmp() to treat them as plain values with a None key.
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220318125304.66131-2-hreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Add a `check: bool = True` parameter to both functions and make their
qemu_img() invocations raise on error by default.
users of img_info_log:
206, 207, 210, 211, 212, 213, 237, 242, 266, 274, 302
users of qemu_img_log:
044, 209, 274, 302, 304
iotests 242 and 266 need to use check=False for their negative tests.
iotests 206, 210, 211, 212, 213, 237, 274 and 302 continue working
normally.
As of this commit, all calls to QEMU_IMG made from iotests enforce a
return code of zero by default unless explicitly disabled or suppressed
by passing check=False or with an exception handler.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20220321201618.903471-19-jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
With the exceptional 'create' calls removed in the prior commit, change
qemu_img_log() and img_info_log() to call qemu_img() directly
instead.
For now, allow these calls to qemu-img to return non-zero on the basis
that any unusual output will be logged anyway. The very next commit
begins to enforce a successful exit code by default even for the logged
functions.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20220321201618.903471-18-jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
qemu_img_log() calls into qemu_img_pipe(), which always removes output
for 'create' commands on success anyway. Replace all of these calls to
the simpler qemu_img_create(...) which doesn't log, but raises a
detailed exception object on failure instead.
Blank lines are removed from output files where appropriate.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220321201618.903471-17-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Admittedly a mostly lateral move, but qemu_img() is essentially the
replacement for qemu_img_pipe_and_status(). It will give slightly better
diagnostics on crash.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220321201618.903471-16-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
As part of moving all python iotest invocations of qemu-img onto a
single qemu_img() implementation, remove a few lingering uses of
qemu_img_pipe() from outside of iotests.py itself.
Several cases here rely on the knowledge that qemu_img_pipe() suppresses
*all* output on a successful case when the command being issued is
'create'.
065: This call's output is inspected, but it appears as if it's expected
to succeed. Replace this call with the checked qemu_img() variant
instead to get better diagnostics if/when qemu-img itself fails.
237: "create" call output isn't actually logged. Use qemu_img_create()
instead, which checks the return code. Remove the empty lines from
the test output.
296: Two calls;
-create: Expected to succeed. Like other create calls, the output
isn't actually logged. Switch to a checked variant
(qemu_img_create) instead. The output for this test is
a mixture of both test styles, so actually replace the
blank line for readability.
-amend: This is expected to fail. Log the output.
After this patch, the only uses of qemu_img_pipe are internal to
iotests.py and will be removed in subsequent patches.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220321201618.903471-15-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
qemu_img_pipe calls blank their output when the command being run is a
'create' call and the command succeeds. Thus, the normative output for
this command in iotest 149 is to print a blank line. We can remove the
logging from this invocation and use a checked invocation, but we still
need to inspect the actual output to see if we want to retroactively
skip the test due to missing cipher support.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220321201618.903471-14-jsnow@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
