On x86, there are two notifiers registered due to vtd-ir memory region
splitting the whole address space. During replay of the address space
for each notifier, the whole address space is scanned which is
unnecessory.
We only need to scan the space belong to notifier montiored space.
Assert when notifier is used to monitor beyond iommu memory region's
address space.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20230215065238.713041-1-zhenzhong.duan@intel.com>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The 'hwaddr' type is defined in "exec/hwaddr.h" as:
hwaddr is the type of a physical address
(its size can be different from 'target_ulong').
All definitions use the 'HWADDR_' prefix, except TARGET_FMT_plx:
$ fgrep define include/exec/hwaddr.h
#define HWADDR_H
#define HWADDR_BITS 64
#define HWADDR_MAX UINT64_MAX
#define TARGET_FMT_plx "%016" PRIx64
^^^^^^
#define HWADDR_PRId PRId64
#define HWADDR_PRIi PRIi64
#define HWADDR_PRIo PRIo64
#define HWADDR_PRIu PRIu64
#define HWADDR_PRIx PRIx64
#define HWADDR_PRIX PRIX64
Since hwaddr's size can be *different* from target_ulong, it is
very confusing to read one of its format using the 'TARGET_FMT_'
prefix, normally used for the target_long / target_ulong types:
$ fgrep TARGET_FMT_ include/exec/cpu-defs.h
#define TARGET_FMT_lx "%08x"
#define TARGET_FMT_ld "%d"
#define TARGET_FMT_lu "%u"
#define TARGET_FMT_lx "%016" PRIx64
#define TARGET_FMT_ld "%" PRId64
#define TARGET_FMT_lu "%" PRIu64
Apparently this format was missed during commit a8170e5e97
("Rename target_phys_addr_t to hwaddr"), so complete it by
doing a bulk-rename with:
$ sed -i -e s/TARGET_FMT_plx/HWADDR_FMT_plx/g $(git grep -l TARGET_FMT_plx)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230110212947.34557-1-philmd@linaro.org>
[thuth: Fix some warnings from checkpatch.pl along the way]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Tweak the semantic patch to drop redundant parenthesis around the
return expression.
Coccinelle drops a comment in hw/rdma/vmw/pvrdma_cmd.c; restored
manually.
Coccinelle messes up vmdk_co_create(), not sure why. Change dropped,
will be done manually in the next commit.
Line breaks in target/avr/cpu.h and hw/rdma/vmw/pvrdma_cmd.c tidied up
manually.
Whitespace in tools/virtiofsd/fuse_lowlevel.c tidied up manually.
checkpatch.pl complains "return of an errno should typically be -ve"
two times for hw/9pfs/9p-synth.c. Preexisting, the patch merely makes
it visible to checkpatch.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221122134917.1217307-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
- Move the implement vfio_get_xlat_addr to softmmu/memory.c, and
change the name to memory_get_xlat_addr(). So we can use this
function on other devices, such as vDPA device.
- Add a new function vfio_get_xlat_addr in vfio/common.c, and it will check
whether the memory is backed by a discard manager. then device can
have its own warning.
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20221031031020.1405111-2-lulu@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Convert the TARGET_WORDS_BIGENDIAN macro, similarly to what was done
with HOST_BIG_ENDIAN. The new TARGET_BIG_ENDIAN macro is either 0 or 1,
and thus should always be defined to prevent misuse.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-8-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
memory_region_readd_subregion() wants to readd a region by first
removing it and then readding it. For readding, it doesn't use one of
the memory_region_add_*() variants, which is why fail to re-increment the
mr->mapped_via_alias counters, resulting in the
assert(alias->mapped_via_alias >= 0) in memory_region_del_subregion()
triggering the next time we call memory_region_readd_subregion().
Fix it by using memory_region_add_subregion_common() for readding the
region.
Reported-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Fixes: 5ead62185d ("memory: Make memory_region_is_mapped() succeed when mapped via an alias")
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: "Philippe Mathieu-Daudé" <f4bug@amsat.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220201100940.47788-1-david@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
QEMU can now easily crash with two continuous migration carried out:
(qemu) migrate -d exec:cat>out
(qemu) migrate_cancel
(qemu) migrate -d exec:cat>out
[crash] ../softmmu/memory.c:2782: memory_global_dirty_log_start: Assertion
`!(global_dirty_tracking & flags)' failed.
It's because memory API provides a way to postpone dirty log stop if the VM is
stopped, and that'll be re-done until the next VM start. It was added in 2017
with commit 1931076077 ("migration: optimize the downtime", 2017-08-01).
However the recent work on allowing dirty tracking to be bitmask broke it,
which is commit 63b41db4bc ("memory: make global_dirty_tracking a bitmask",
2021-11-01).
The fix proposed in this patch contains two things:
(1) Instead of passing over the flags to postpone stop dirty track, we add a
global variable (along with current vmstate_change variable) to record
what flags to stop dirty tracking.
(2) When start dirty tracking, instead if remove the vmstate hook directly,
we also execute the postponed stop process so that we make sure all the
starts and stops will be paired.
This procedure is overlooked in the bitmask-ify work in 2021.
Cc: Hyman Huang <huangy81@chinatelecom.cn>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2044818
Fixes: 63b41db4bc ("memory: make global_dirty_tracking a bitmask")
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220207123019.27223-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We should only call the log_global_start/stop when the global dirty track
bitmask changes from zero<->non-zero.
No real issue reported for this yet probably because no immediate user to
enable both dirty rate measurement and migration at the same time. However
it'll be good to be prepared for it.
Fixes: 63b41db4bc ("memory: make global_dirty_tracking a bitmask")
Cc: qemu-stable@nongnu.org
Cc: Hyman Huang <huangy81@chinatelecom.cn>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20211130080028.6474-1-peterx@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
memory_region_is_mapped() currently does not return "true" when a memory
region is mapped via an alias.
Assuming we have:
alias (A0) -> alias (A1) -> region (R0)
Mapping A0 would currently only make memory_region_is_mapped() succeed
on A0, but not on A1 and R0.
Let's fix that by adding a "mapped_via_alias" counter to memory regions and
updating it accordingly when an alias gets (un)mapped.
I am not aware of actual issues, this is rather a cleanup to make it
consistent.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20211102164317.45658-3-david@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
While mtree_info() handles both ASes and flatviews cases,
the two cases share basically no code. Split mtree_info()
as mtree_info_flatview() + mtree_info_as() to simplify.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210904231101.1071929-2-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Since commit 2cdfcf272d ("memory: assign MemoryRegionOps to all
regions"), all newly created regions are assigned with
unassigned_mem_ops (which might be then overwritten).
When using aliased container regions, and there is no region mapped
at address 0 in the container, the memory_region_dispatch_read()
and memory_region_dispatch_write() calls incorrectly return the
container unassigned_mem_ops, because the alias offset is not used.
Consider the following setup:
+--------------------+ < - - - - - - - - - - - +
| Container | mr
| (unassigned_mem) | |
| |
| | |
| | alias_offset
+ + <- - - - - - +----------+---------+
| +----------------+ | | |
| | MemoryRegion0 | | | |
| +----------------+ | | Alias | addr1
| | MemoryRegion1 | | <~ ~ ~ ~ ~ | | <~~~~~~
| +----------------+ | | |
| | +--------------------+
| |
| |
| |
| |
| +----------------+ |
| | MemoryRegionX | |
| +----------------+ |
| | MemoryRegionY | |
| +----------------+ |
| | MemoryRegionZ | |
| +----------------+ |
+--------------------+
The memory_region_init_alias() flow is:
memory_region_init_alias()
-> memory_region_init()
-> object_initialize(TYPE_MEMORY_REGION)
-> memory_region_initfn()
-> mr->ops = &unassigned_mem_ops;
Later when accessing offset=addr1 via the alias, we expect to hit
MemoryRegion1. The memory_region_dispatch_read() flow is:
memory_region_dispatch_read(addr1)
-> memory_region_access_valid(mr) <- addr1 offset is ignored
-> mr->ops->valid.accepts()
-> unassigned_mem_accepts()
<- false
<- false
<- MEMTX_DECODE_ERROR
The caller gets a MEMTX_DECODE_ERROR while the access is OK.
Fix by dispatching aliases recursively, accessing its origin region
after adding the alias offset.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210418055708.820980-1-f4bug@amsat.org>
Introduce replay_discarded callback similar to our existing
replay_populated callback, to be used my migration code to never migrate
discarded memory.
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
since dirty ring has been introduced, there are two methods
to track dirty pages of vm. it seems that "logging" has
a hint on the method, so rename the global_dirty_log to
global_dirty_tracking would make description more accurate.
dirty rate measurement may start or stop dirty tracking during
calculation. this conflict with migration because stop dirty
tracking make migration leave dirty pages out then that'll be
a problem.
make global_dirty_tracking a bitmask can let both migration and
dirty rate measurement work fine. introduce GLOBAL_DIRTY_MIGRATION
and GLOBAL_DIRTY_DIRTY_RATE to distinguish what current dirty
tracking aims for, migration or dirty rate.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <9c9388657cfa0301bd2c1cfa36e7cf6da4aeca19.1624040308.git.huangy81@chinatelecom.cn>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In memory_region_access_valid() invalid accesses are logged to help
debugging but the log message does not say if it was a read or write.
Log that too to better identify the access causing the problem.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20211011173616.F1DE0756022@zero.eik.bme.hu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Trace at memory_region_sync_dirty_bitmap() for log_sync() or global_log_sync()
on memory regions. One trace line should suffice when it finishes, so as to
estimate the time used for each log sync process.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210817013706.30986-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new RAMBlock flag to denote "protected" memory, i.e. memory that
looks and acts like RAM but is inaccessible via normal mechanisms,
including DMA. Use the flag to skip protected memory regions when
mapping RAM for DMA in VFIO.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
MemoryRegion names is cached on first call to memory_region_name(),
so displaying the name is trace events is cheap. Add it for read /
write ops.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210307074833.143106-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In case one wants to create a permanent copy of a MemoryRegionSections,
one needs access to flatview_ref()/flatview_unref(). Instead of exposing
these, let's just add helpers to copy/free a MemoryRegionSection and
properly adjust references.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210413095531.25603-3-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We have some special RAM memory regions (managed by virtio-mem), whereby
the guest agreed to only use selected memory ranges. "unused" parts are
discarded so they won't consume memory - to logically unplug these memory
ranges. Before the VM is allowed to use such logically unplugged memory
again, coordination with the hypervisor is required.
This results in "sparse" mmaps/RAMBlocks/memory regions, whereby only
coordinated parts are valid to be used/accessed by the VM.
In most cases, we don't care about that - e.g., in KVM, we simply have a
single KVM memory slot. However, in case of vfio, registering the
whole region with the kernel results in all pages getting pinned, and
therefore an unexpected high memory consumption - discarding of RAM in
that context is broken.
Let's introduce a way to coordinate discarding/populating memory within a
RAM memory region with such special consumers of RAM memory regions: they
can register as listeners and get updates on memory getting discarded and
populated. Using this machinery, vfio will be able to map only the
currently populated parts, resulting in discarded parts not getting pinned
and not consuming memory.
A RamDiscardManager has to be set for a memory region before it is getting
mapped, and cannot change while the memory region is mapped.
Note: At some point, we might want to let RAMBlock users (esp. vfio used
for nvme://) consume this interface as well. We'll need RAMBlock notifier
calls when a RAMBlock is getting mapped/unmapped (via the corresponding
memory region), so we can properly register a listener there as well.
Reviewed-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Auger Eric <eric.auger@redhat.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: teawater <teawaterz@linux.alibaba.com>
Cc: Marek Kedzierski <mkedzier@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210413095531.25603-2-david@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Let's pass ram_flags to qemu_ram_alloc() and qemu_ram_alloc_internal(),
preparing for passing additional flags.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com> for memory backend and machine core
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210510114328.21835-7-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let's pass in ram flags just like we do with qemu_ram_alloc_from_file(),
to clean up and prepare for more flags.
Simplify the documentation of passed ram flags: Looking at our
documentation of RAM_SHARED and RAM_PMEM is sufficient, no need to be
repetitive.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com> for memory backend and machine core
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210510114328.21835-5-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some of the memory listener may want to do log synchronization without
being able to specify a range of memory to sync but always globally.
Such a memory listener should provide this new method instead of the
log_sync() method.
Obviously we can also achieve similar thing when we put the global
sync logic into a log_sync() handler. However that's not efficient
enough because otherwise memory_global_dirty_log_sync() may do the
global sync N times, where N is the number of flat ranges in the
address space.
Make this new method be exclusive to log_sync().
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210506160549.130416-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stop including exec/address-spaces.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-5-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Stop including cpu.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-4-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The function flatview_for_each_range() calls a callback for each
range in a FlatView. Currently the callback gets the start and
length of the range and the MemoryRegion involved, but not the offset
within the MemoryRegion. Add this to the callback's arguments; we're
going to want it for a new use in the next commit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210318174823.18066-4-peter.maydell@linaro.org
For the sparse-mem device, we want the fuzzer to populate entire DMA
reads from sparse-mem, rather than hooking into the individual MMIO
memory_region_dispatch_read operations. Otherwise, the fuzzer will treat
each sequential read separately (and populate it with a separate
pattern). Work around this by rearranging some DMA hooks. Since the
fuzzer has it's own logic to skip accidentally writing to MMIO regions,
we can call the DMA cb, outside the flatview_translate loop.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The 'running' argument from VMChangeStateHandler does not require
other value than 0 / 1. Make it a plain boolean.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210111152020.1422021-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We forward-declare Object typedef in "qemu/typedefs.h" since commit
ca27b5eb7c ("qom/object: Move Object typedef to 'qemu/typedefs.h'").
Use it everywhere to make the code simpler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210225182003.3629342-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Allow RAM MemoryRegion to be created from an offset in a file, instead
of allocating at offset of 0 by default. This is needed to synchronize
RAM between QEMU & remote process.
Signed-off-by: Jagannathan Raman <jag.raman@oracle.com>
Signed-off-by: John G Johnson <john.g.johnson@oracle.com>
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 609996697ad8617e3b01df38accc5c208c24d74e.1611938319.git.jag.raman@oracle.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We passed an is_write flag to the fuzz_dma_read_cb function to
differentiate between the mapped DMA regions that need to be populated
with fuzzed data, and those that don't. We simply passed through the
address_space_map is_write parameter. The goal was to cut down on
unnecessarily populating mapped DMA regions, when they are not read
from.
Unfortunately, nothing precludes code from reading from regions mapped
with is_write=true. For example, see:
https://lists.gnu.org/archive/html/qemu-devel/2021-01/msg04729.html
This patch removes the is_write parameter to fuzz_dma_read_cb. As a
result, we will fill all mapped DMA regions with fuzzed data, ignoring
the specified transfer direction.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20210120060255.558535-1-alxndr@bu.edu>
There is currently no way to open(O_RDONLY) and mmap(PROT_READ) when
creating a memory region from a file. This functionality is needed since
the underlying host file may not allow writing.
Add a bool readonly argument to memory_region_init_ram_from_file() and
the APIs it calls.
Extend memory_region_init_ram_from_file() rather than introducing a
memory_region_init_rom_from_file() API so that callers can easily make a
choice between read/write and read-only at runtime without calling
different APIs.
No new RAMBlock flag is introduced for read-only because it's unclear
whether RAMBlocks need to know that they are read-only. Pass a bool
readonly argument instead.
Both of these design decisions can be changed in the future. It just
seemed like the simplest approach to me.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20210104171320.575838-2-stefanha@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Compute the DIRTY_MEMORY_CODE bit in memory_region_get_dirty_log_mask
instead of memory_region_init_*. This makes it possible to allocate
memory backend objects at any time.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Device IOTLB invalidations can unmap arbitrary ranges, eiter outside of
the memory region or even [0, ~0ULL] for all the space. The assertion
could be hit by a guest, and rhel7 guest effectively hit it.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20201116165506.31315-6-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This way we can tell between regular IOMMUTLBEntry (entry of IOMMU
hardware) and notifications.
In the notifications, we set explicitly if it is a MAPs or an UNMAP,
instead of trusting in entry permissions to differentiate them.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20201116165506.31315-3-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Previous name didn't reflect the iommu operation.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20201116165506.31315-2-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It makes no sense to track dirty pages for those un-migratable memory
regions (e.g., Memory BAR region of the VFIO PCI device) and doing so
will potentially lead to some unpleasant issues during migration [1].
Skip dirty tracking for those regions by evaluating if the region is
migratable before setting dirty_log_mask (DIRTY_MEMORY_MIGRATION).
[1] https://lists.gnu.org/archive/html/qemu-devel/2020-11/msg03757.html
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Message-Id: <20201116132210.1730-1-yuzenghui@huawei.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Eventfd can be registered with a zero length when fast_mmio is true.
Handle this case properly when dispatching through QEMU.
Signed-off-by: Elena Afanasova <eafanasova@gmail.com>
Message-id: cf71a62eb04e61932ff8ffdd02e0b2aab4f495a0.camel@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Allow to set the page size mask supported by an iommu memory region.
This enables a vIOMMU to communicate the page size granule supported by
an assigned device, on hosts that use page sizes greater than 4kB.
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20201030180510.747225-8-jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
mr->ram_block is NULL when mr->is_iommu is true, then fr.dirty_log_mask
wasn't set correctly due to which memory listener's log_sync doesn't
get called.
This patch returns log_mask with DIRTY_MEMORY_MIGRATION set when
IOMMU is enabled.
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
We should be careful to not call any functions besides fuzz_dma_read_cb.
Without --enable-fuzzing, fuzz_dma_read_cb is an empty inlined function.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20201023150746.107063-7-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch declares the fuzz_dma_read_cb function and uses the
preprocessor and linker(weak symbols) to handle these cases:
When we build softmmu/all with --enable-fuzzing, there should be no
strong symbol defined for fuzz_dma_read_cb, and we link against a weak
stub function.
When we build softmmu/fuzz with --enable-fuzzing, we link against the
strong symbol in generic_fuzz.c
When we build softmmu/all without --enable-fuzzing, fuzz_dma_read_cb is
an empty, inlined function. As long as we don't call any other functions
when building the arguments, there should be no overhead.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20201023150746.107063-6-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201023150746.107063-2-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Log invalid memory accesses with as GUEST_ERROR.
This is particularly useful since commit 5d971f9e67 which reverted
("memory: accept mismatching sizes in memory_region_access_valid").
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20201005152725.2143444-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Last uses of memory_region_clear_global_locking() have been
removed in commit 7070e085d4 ("acpi: mark PMTIMER as unlocked")
and commit 08565552f7 ("cputlb: Move NOTDIRTY handling from I/O
path to TLB path").
Remove memory_region_clear_global_locking() and the now unused
'global_locking' field in MemoryRegion.
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200806150726.962-1-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
clang's C11 atomic_fetch_*() functions only take a C11 atomic type
pointer argument. QEMU uses direct types (int, etc) and this causes a
compiler error when a QEMU code calls these functions in a source file
that also included <stdatomic.h> via a system header file:
$ CC=clang CXX=clang++ ./configure ... && make
../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid)
Avoid using atomic_*() names in QEMU's atomic.h since that namespace is
used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h
and <stdatomic.h> can co-exist. I checked /usr/include on my machine and
searched GitHub for existing "qatomic_" users but there seem to be none.
This patch was generated using:
$ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \
sort -u >/tmp/changed_identifiers
$ for identifier in $(</tmp/changed_identifiers); do
sed -i "s%\<$identifier\>%q$identifier%g" \
$(git grep -I -l "\<$identifier\>")
done
I manually fixed line-wrap issues and misaligned rST tables.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
