The generic vhost code expects that many of the VhostOps methods in the
respective backends set errno on errors. However, none of the existing
backends actually bothers to do so. In a number of those methods errno
from the failed call is clobbered by successful later calls to some
library functions; on a few code paths the generic vhost code then
negates and returns that errno, thus making failures look as successes
to the caller.
As a result, in certain scenarios (e.g. live migration) the device
doesn't notice the first failure and goes on through its state
transitions as if everything is ok, instead of taking recovery actions
(break and reestablish the vhost-user connection, cancel migration, etc)
before it's too late.
To fix this, consolidate on the convention to return negated errno on
failures throughout generic vhost, and use it for error propagation.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Message-Id: <20211111153354.18807-10-rvkagan@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VhostOps methods in user_ops are not very consistent in their error
returns: some return negated errno while others just -1.
Make sure all of them consistently return negated errno. This also
helps error propagation from the functions being called inside.
Besides, this synchronizes the error return convention with the other
two vhost backends, kernel and vdpa, and will therefore allow for
consistent error propagation in the generic vhost code (in a followup
patch).
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Message-Id: <20211111153354.18807-9-rvkagan@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Almost all VhostOps methods in vdpa_ops follow the convention of
returning negated errno on error.
Adjust the few that don't. To that end, rework vhost_vdpa_add_status to
check if setting of the requested status bits has succeeded and return
the respective error code it hasn't, and propagate the error codes
wherever it's appropriate.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Message-Id: <20211111153354.18807-8-rvkagan@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Almost all VhostOps methods in kernel_ops follow the convention of
returning negated errno on error.
Adjust the only one that doesn't.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Message-Id: <20211111153354.18807-7-rvkagan@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Fix the (hypothetical) potential problem when the value parsed out of
the vhost module parameter in sysfs overflows the return value from
vhost_kernel_memslots_limit.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Message-Id: <20211111153354.18807-6-rvkagan@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
After the return from tcp_chr_recv, tcp_chr_sync_read calls into a
function which eventually makes a system call and may clobber errno.
Make a copy of errno right after tcp_chr_recv and restore the errno on
return from tcp_chr_sync_read.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Message-Id: <20211111153354.18807-4-rvkagan@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
tcp_chr_recv communicates the specific error condition to the caller via
errno. However, after setting it, it may call into some system calls or
library functions which can clobber the errno.
Avoid this by moving the errno assignment to the end of the function.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Message-Id: <20211111153354.18807-3-rvkagan@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
vhost-user-blk realize only attempts to reconnect if the previous
connection attempt failed on "a problem with the connection and not an
error related to the content (which would fail again the same way in the
next attempt)".
However this distinction is very subtle, and may be inadvertently broken
if the code changes somewhere deep down the stack and a new error gets
propagated up to here.
OTOH now that the number of reconnection attempts is limited it seems
harmless to try reconnecting on any error.
So relax the condition of whether to retry connecting to check for any
error.
This patch amends a527e312b5 "vhost-user-blk: Implement reconnection
during realize".
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Message-Id: <20211111153354.18807-2-rvkagan@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Unify format used by trace_pci_update_mappings_del(),
trace_pci_update_mappings_add(), trace_pci_cfg_write() and
trace_pci_cfg_read() to print the device name and bus number,
slot number and function number.
For instance:
pci_cfg_read virtio-net-pci 00:0 @0x20 -> 0xffffc00c
pci_cfg_write virtio-net-pci 00:0 @0x20 <- 0xfea0000c
pci_update_mappings_del d=0x555810b92330 01:00.0 4,0xffffc000+0x4000
pci_update_mappings_add d=0x555810b92330 01:00.0 4,0xfea00000+0x4000
becomes
pci_cfg_read virtio-net-pci 01:00.0 @0x20 -> 0xffffc00c
pci_cfg_write virtio-net-pci 01:00.0 @0x20 <- 0xfea0000c
pci_update_mappings_del virtio-net-pci 01:00.0 4,0xffffc000+0x4000
pci_update_mappings_add virtio-net-pci 01:00.0 4,0xfea00000+0x4000
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20211105192541.655831-1-lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add support for configure interrupt, The process is used kvm_irqfd_assign
to set the gsi to kernel. When the configure notifier was signal by
host, qemu will inject a msix interrupt to guest
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20211104164827.21911-11-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add configure interrupt support for virtio-mmio bus. This
interrupt will be working while the backend is vhost-vdpa
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20211104164827.21911-10-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add functions to support configure interrupt in virtio_net
The functions are config_pending and config_mask, while
this input idx is VIRTIO_CONFIG_IRQ_IDX will check the
function of configure interrupt.
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20211104164827.21911-9-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add functions to support configure interrupt.
The configure interrupt process will start in vhost_dev_start
and stop in vhost_dev_stop.
Also add the functions to support vhost_config_pending and
vhost_config_mask, for masked_config_notifier, we only
use the notifier saved in vq 0.
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20211104164827.21911-8-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the functions to support the configure interrupt in virtio
The function virtio_config_guest_notifier_read will notify the
guest if there is an configure interrupt.
The function virtio_config_set_guest_notifier_fd_handler is
to set the fd hander for the notifier
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20211104164827.21911-7-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add new call back function in vhost-vdpa, this function will
set the event fd to kernel. This function will be called
in the vhost_dev_start and vhost_dev_stop
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20211104164827.21911-6-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduces new VhostOps vhost_set_config_call. This function allows the
vhost to set the event fd to kernel
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20211104164827.21911-5-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To reuse the interrupt process in configure interrupt
Need to decouple the single vector from the interrupt process. Add new function
kvm_virtio_pci_vector_use_one and _release_one. These functions are use
for the single vector, the whole process will finish in a loop for the vq number.
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20211104164827.21911-4-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To reuse the notifier process in configure interrupt.
Use the virtio_pci_get_notifier function to get the notifier.
the INPUT of this function is the IDX, the OUTPUT is notifier and
the vector
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20211104164827.21911-3-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To support configure interrupt for vhost-vdpa
Introduce VIRTIO_CONFIG_IRQ_IDX -1 as configure interrupt's queue index,
Then we can reuse the functions guest_notifier_mask and guest_notifier_pending.
Add the check of queue index in these drivers, if the driver does not support
configure interrupt, the function will just return
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20211104164827.21911-2-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When bus is looked up on a pci write, we didn't
validate that the lookup succeeded.
Fuzzers thus can trigger QEMU crash by dereferencing the NULL
bus pointer.
Fixes: b32bd763a1 ("pci: introduce acpi-index property for PCI device")
Fixes: CVE-2021-4158
Cc: "Igor Mammedov" <imammedo@redhat.com>
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/770
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
add IFLA_BRPORT_MCAST_EHT_HOSTS_LIMIT and IFLA_BRPORT_MCAST_EHT_HOSTS_CNT
# QEMU_LOG=unimp ip a
Unknown QEMU_IFLA_BRPORT type 37
Unknown QEMU_IFLA_BRPORT type 38
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211219154514.2165728-3-laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Use g_try_malloc instead of malloc to alocate the target ifconfig.
Also replace the corresponding free with g_free.
Signed-off-by: Ahmed Abouzied <email@aabouzied.com>
Message-Id: <20220104143841.25116-1-email@aabouzied.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Using do_sigprocmask directly was incorrect, as it will
leave the signal blocked by the outer layers of linux-user.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211221025012.1057923-8-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Do not cast the signal mask elements; trust __put_user.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211221025012.1057923-7-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The real kernel will talk about the user PC as EA,
because that's where the hardware will have copied it,
and where it expects to put it to then use ERET.
But qemu does not emulate all of the exception stuff
while emulating user-only. Manipulate PC directly.
This fixes signal entry and return, and eliminates
some slight confusion from target_cpu_copy_regs.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211221025012.1057923-6-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The first word of page1 is data, so the whole thing
can't be implemented with emulation of addresses.
Use init_guest_commpage for the allocation.
Hijack trap number 16 to implement cmpxchg.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211221025012.1057923-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Arm will no longer be the only target requiring a commpage,
but it will continue to be the only target placing the page
at the high end of the address space.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211221025012.1057923-4-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Do not confuse host and guest addresses. Lock and unlock
the target_rt_sigframe structure in setup_rt_sigframe.
Since rt_setup_ucontext always returns 0, drop the return
value entirely. This eliminates the only write to the err
variable in setup_rt_sigframe.
Always copy the siginfo structure.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211221025012.1057923-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The real kernel has to load the instruction and extract
the imm5 field; for qemu, modify the translator to do this.
The use of R_AT for this in cpu_loop was a bug. Handle
the other trap numbers as per the kernel's trap_table.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211221025012.1057923-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The possible variants for region type in /proc/self/maps are either
private "p" or shared "s". In the current implementation,
we mark shared regions as "-". It could break memory mapping parsers
such as included into ASan/HWASan sanitizers.
Fixes: 01ef6b9e4e ("linux-user: factor out reading of /proc/self/maps")
Signed-off-by: Andrey Kazmin <a.kazmin@partner.samsung.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20211227125048.22610-1-a.kazmin@partner.samsung.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
There seems to be difference in syscall and libc definition of these
methods and therefore musl does not implement them (1e21e78bf7). Call
syscall directly to ensure the behavior of the libc of user application,
not the libc that was used to build QEMU.
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
Message-Id: <20220105041819.24160-3-tonistiigi@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
These syscalls are not exposed by glibc. The struct type need to be
redefined as it can't be included directly before
https://lkml.org/lkml/2020/5/28/810 .
sched_attr type can grow in future kernel versions. When client sends
values that QEMU does not understand it will return E2BIG with same
semantics as old kernel would so client can retry with smaller inputs.
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
Message-Id: <20220105041819.24160-2-tonistiigi@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When converting a siginfo_t from waitid(), the interpretation of si_status
depends on the value of si_code: For CLD_EXITED, it is an exit code and
should be copied verbatim. For other codes, it is a signal number
(possibly with additional high bits from ptrace) that should be mapped.
This code was previously changed in commit 1c3dfb506e
("linux-user/signal: Decode waitid si_code"), but the fix was
incomplete.
Tested with the following test program:
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/wait.h>
int main() {
pid_t pid = fork();
if (pid == 0) {
exit(12);
} else {
siginfo_t siginfo = {};
waitid(P_PID, pid, &siginfo, WEXITED);
printf("Code: %d, status: %d\n", (int)siginfo.si_code, (int)siginfo.si_status);
}
pid = fork();
if (pid == 0) {
raise(SIGUSR2);
} else {
siginfo_t siginfo = {};
waitid(P_PID, pid, &siginfo, WEXITED);
printf("Code: %d, status: %d\n", (int)siginfo.si_code, (int)siginfo.si_status);
}
}
Output with an x86_64 host and mips64el target before 1c3dfb506e
(incorrect: exit code 12 is translated like a signal):
Code: 1, status: 17
Code: 2, status: 17
After 1c3dfb506e (incorrect: signal number is not translated):
Code: 1, status: 12
Code: 2, status: 12
With this patch:
Code: 1, status: 12
Code: 2, status: 17
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <81534fde7cdfc6acea4889d886fbefdd606630fb.1635019124.git.mschiffer@universe-factory.net>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Leave TARGET_ALIGNED_ONLY set, but use the new CPUState
flag to set MO_UNALN for the instructions that the kernel
handles in the unaligned trap.
The Linux kernel does not handle all memory operations: no
floating-point and no MAC.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211227150127.2659293-7-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Leave TARGET_ALIGNED_ONLY set, but use the new CPUState
flag to set MO_UNALN for the instructions that the kernel
handles in the unaligned trap.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211227150127.2659293-6-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Leave TARGET_ALIGNED_ONLY set, but use the new CPUState
flag to set MO_UNALN for the instructions that the kernel
handles in the unaligned trap.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211227150127.2659293-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This requires extra work for each target, but adds the
common syscall code, and the necessary flag in CPUState.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211227150127.2659293-4-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Create a list of subcodes that we want to pass on, a list of
subcodes that should not be passed on because they would affect
the running qemu itself, and a list that probably could be
implemented but require extra work. Do not pass on unknown subcodes.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211227150127.2659293-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Since the prctl constants are supposed to be generic, supply
any that are not provided by the host.
Split out subroutines for PR_GET_FP_MODE, PR_SET_FP_MODE,
PR_GET_VL, PR_SET_VL, PR_RESET_KEYS, PR_SET_TAGGED_ADDR_CTRL,
PR_GET_TAGGED_ADDR_CTRL. Return EINVAL for guests that do
not support these options rather than pass them on to the host.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211227150127.2659293-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
TARGET_SIGSTKSZ is not used, we should remove it.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1637893388-10282-4-git-send-email-gaosong@loongson.cn>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
TARGET_MINSIGSTKSZ has been defined in generic/signal.h
or target_signal.h, We don't need to define it again.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1637893388-10282-3-git-send-email-gaosong@loongson.cn>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
cpu_loop() never exits, so mark it with QEMU_NORETURN.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-By: Warner Losh <imp@bsdimp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20211106113916.544587-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Linux Hexagon port doesn't define a specific 'struct stat'
but uses the generic one (see Linux commit 6103ec56c65c [*]
"asm-generic: add generic ABI headers" which predates the
introduction of the Hexagon port).
Remove the target specific target_stat (which in fact is the
target_stat64 structure but uses incorrect target_long and
ABI unsafe long long types) and use the generic target_stat64
instead.
[*] https://github.com/torvalds/linux/commit/6103ec56c65c3#diff-5f59b07b38273b7d6a74193bc81a8cd18928c688276eae20cb10c569de3253ee
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <20211116210919.2823206-1-f4bug@amsat.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
qemu-binfmt-conf.sh should use "-F" as short option for "--qemu-suffix".
Fix the getopt call to make this work.
Fixes: 7155be7cda ("qemu-binfmt-conf.sh: allow to provide a suffix to the interpreter name")
Signed-off-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211129135100.3934-1-mwilck@suse.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
If we warn about the block size being smaller than the default, we skip
some alignment checks.
This can currently only fail on x86-64, when specifying a block size of
1 MiB, however, we detect the THP size of 2 MiB.
Fixes: 228957fea3 ("virtio-mem: Probe THP size to determine default block size")
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20211011173305.13778-1-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* Some minor qtest and unit test improvements
* Remove -no-quit option
* Fixes for the docs
-----BEGIN PGP SIGNATURE-----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=Xv2u
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2022-01-05' of https://gitlab.com/thuth/qemu into staging
* Add compat machines for 7.0
* Some minor qtest and unit test improvements
* Remove -no-quit option
* Fixes for the docs
# gpg: Signature made Wed 05 Jan 2022 02:10:49 AM PST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [undefined]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2022-01-05' of https://gitlab.com/thuth/qemu:
docs/tools/qemu-trace-stap.rst: Do not hard-code the QEMU binary name
gitlab-ci: Enable docs in the centos job
docs/sphinx: fix compatibility with sphinx < 1.8
qemu-options: Remove the deprecated -no-quit option
tests/unit/test-util-sockets: Use g_file_open_tmp() to create temp file
tests/qtest/hd-geo-test: Check for the lsi53c895a controller before using it
tests/qtest/test-x86-cpuid-compat: Check for machines before using them
hw: Add compat machines for 7.0
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
