Commit Graph

5361 Commits

Author SHA1 Message Date
Gerd Hoffmann
aee32bf333 spice/qxl: move worker wrappers
Move the wrapper functions which are used by qxl only to qxl.c.
Rename them from qemu_spice_* to qxl_spice_*.  Also pass in a
qxl state pointer instead of a SimpleSpiceDisplay pointer.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-08-01 12:43:49 +02:00
Gerd Hoffmann
a963f876c8 spice: add qemu_spice_display_init_common
Factor out SimpleSpiceDisplay initialization into
qemu_spice_display_init_common() and call it from
both qxl.c (for vga mode) and spice-display.c

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-08-01 12:43:49 +02:00
Gerd Hoffmann
5c59d11816 spice: add worker wrapper functions.
Add wrapper functions for all spice worker calls.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-08-01 12:43:49 +02:00
Hannes Reinecke
f37bd73b76 scsi-disk: Remove 'drive_kind'
Instead of using its own definitions scsi-disk should
be using the device type of the parent device.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-01 12:10:28 +02:00
Hannes Reinecke
5e30a07d6d scsi: Sanitize command definitions
Sanitize SCSI command definitions.
Add _10 suffix to READ_CAPACITY, WRITE_VERIFY, VERIFY, READ_LONG,
WRITE_LONG, and WRITE_SAME.
Add new command definitions for LOCATE_10, UNMAP, VARLENGTH_CDB,
WRITE_FILEMARKS_16, EXTENDED_COPY, ATA_PASSTHROUGH, ACCESS_CONTROL_IN,
ACCESS_CONTROL_OUT, COMPARE_AND_WRITE, VERIFY_16, SYNCHRONIZE_CACHE_16,
LOCATE_16, ERASE_16, WRITE_LONG_16, LOAD_UNLOAD, VERIFY_12.
Remove invalid definition of WRITE_LONG_2.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-01 12:10:28 +02:00
Hannes Reinecke
8bd3e139c6 scsi: Remove REZERO_UNIT emulation
REZERO_UNIT command is obsolete. Remove support for it.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-01 12:10:28 +02:00
Hannes Reinecke
3790372c96 scsi: Remove references to SET_WINDOW
SET_WINDOW command is vendor-specific only.
So we shouldn't try to emulate it.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-01 12:10:28 +02:00
Hannes Reinecke
5f71d32f0d scsi-disk: Codingstyle fixes
Replace tabs with spaces.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-01 12:10:28 +02:00
Blue Swirl
3e4571724f exec.h cleanup
Move softmmu_exec.h include directives from target-*/exec.h to
target-*/op_helper.c. Move also various other stuff only used in
op_helper.c there.

Define global env in dyngen-exec.h.

For i386, move wrappers for segment and FPU helpers from user-exec.c
to op_helper.c. Implement raise_exception_err_env() to handle dynamic
CPUState. Move the function declarations to cpu.h since they can be
used outside of op_helper.c context.

LM32, s390x, UniCore32: remove unused cpu_halted(), regs_to_env() and
env_to_regs().

ARM: make raise_exception() static.

Convert
#include "exec.h"
to
#include "cpu.h"
#include "dyngen-exec.h"
and remove now unused target-*/exec.h.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-30 09:41:14 +00:00
Michael Tokarev
104bf02eb5 revamp acpitable parsing and allow to specify complete (headerful) table
This patch almost rewrites acpi_table_add() function
(but still leaves it using old get_param_value() interface).
The result is that it's now possible to specify whole table
(together with a header) in an external file, instead of just
data portion, with a new file= parameter, but at the same time
it's still possible to specify header fields as before.

Now with the checkpatch.pl formatting fixes, thanks to
Stefan Hajnoczi for suggestions, with changes from
Isaku Yamahata, and with my further refinements.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Isaku Yamahata <yamahata@valinux.co.jp>
Cc: John Baboval <john.baboval@virtualcomputer.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
[yamahata@valinux.co.jp: fix compile error, comment fallthrough]
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-30 09:33:31 +00:00
Vincent Palatin
5e37141bbb sd: do not add one sector to the disk size
This leads to random off-by-one error.
When the size of the SD is exactly 1GB, the emulation was returning a
wrong SDHC CSD descriptor.

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30 07:26:40 +02:00
Jan Kiszka
8534b8ba33 usb-hid: Fix 0/0 position for Windows in tablet mode
For unknown reasons, Windows drivers (tested with XP and Win7) ignore
usb-tablet events that move the pointer to 0/0. So always report 0/0 as
1/0.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30 07:18:41 +02:00
Vasily Khoruzhick
3bf11207c0 Add support for Zipit Z2 machine
Zipit Z2 is small PXA270 based handheld.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30 07:08:30 +02:00
Andrzej Zaborowski
63efb1d9c4 onenand: Add missing brace.
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30 06:53:39 +02:00
Juha Riihimäki
f1588dd26c hw/onenand: program actions can only clear bits
The program actions onenand_prog_main() and onenand_prog_spare()
can only set bits.

This implies a rewrite of onenand_erase() to not use the program
functions, since erase does need to set bits.

Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by:  Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30 06:42:31 +02:00
Juha Riihimäki
5923ba424b onenand: Handle various ID fields separately
Handle the manufacturer, device and version IDs separately rather than
smooshing them all together into a single uint32_t. Note that the ID
registers are actually 16 bit, even though typically the top bits are 0
and the Read Identification Data command only returns the bottom 8 bits.

Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by:  Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30 06:42:16 +02:00
Peter Maydell
af5a75f41c onenand: Pass BlockDriverState to init function
Pass the BlockDriverState to the onenand init function so it doesn't
need to look up the drive itself.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30 06:42:03 +02:00
Juha Riihimäki
d4220389ff hw/nand: qdevify
Qdevify the NAND device.

Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by:  Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30 06:21:31 +02:00
Peter Maydell
89f640bc04 hw/nand: Writing to NAND can only clear bits
Writing to a NAND device cannot set bits, it can only clear them;
implement this rather than simply copying the data.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30 06:11:24 +02:00
Juha Riihimäki
d72245fbcf hw/nand: Support multiple reads following READ STATUS
After receiving READ STATUS command all subsequent IO reads should return
the status register value until another command is issued.

Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by:  Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30 06:10:06 +02:00
Juha Riihimäki
48197dfa6a hw/nand: Support devices wider than 8 bits
Support NAND devices which are wider than 8 bits.

Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by:  Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30 06:09:32 +02:00
Andrzej Zaborowski
ac2466cdc6 nand: Bump vmstate version after changing structure.
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30 06:01:37 +02:00
Juha Riihimäki
d5f2fd586f hw/nand: Support large NAND devices
Add support for NAND devices of over 1Gb.

Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by:  Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30 06:00:48 +02:00
Peter Maydell
522f253ca8 hw/nand: Pass block device state to init function
Pass the BlockDeviceState to the nand_init() function rather
than having it look it up via drive_get() itself.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30 06:00:45 +02:00
Peter Maydell
c4f05c8cf7 lm832x: Take DeviceState pointer in lm832x_key_event()
Since lm832x has been qdev'ified, its users will generally
have a DeviceState pointer rather than an i2c_slave pointer,
so adjust lm832x_key_event's prototype to suit.

This allows the n810 (its only user) to actually pass a correct
pointer to it rather than NULL. The effect is that we no longer
segfault when a key is pressed.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30 06:00:42 +02:00
Juha Riihimäki
77831c204f hw/omap_gpio.c: Convert to qdev
Convert the OMAP GPIO module to qdev.

Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by:  Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30 06:00:40 +02:00
Peter Maydell
0a34f96690 hw/omap_clk: Add the clock for the OMAP2430-specific fifth GPIO module
The OMAP2430 has a fifth GPIO module which earlier OMAP2 models lack; add
the clock definition for it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30 06:00:38 +02:00
Juha Riihimäki
f9049203d3 hw/omap_l4.c: Add helper function omap_l4_region_base
Add helper function omap_l4_region_base() to return the base address
of a particular region of an L4 target agent.

Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by:  Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-30 06:00:33 +02:00
Anthony Liguori
3046c98404 Merge remote-tracking branch 'agraf/xen-next' into staging 2011-07-29 09:42:12 -05:00
Anthony Liguori
e374560232 Merge remote-tracking branch 'kraxel/migration.2' into staging 2011-07-29 09:39:37 -05:00
Göran Weinholt
6b8273a1b9 multiboot: Fix bss segment support
Multiboot images can specify a bss segment. The boot loader must clear
the memory of the bss and ensure that no modules or structures are
allocated inside it. Several fields are provided in the Multiboot
header that were previously not used properly. The header is now used
to determine how much data should be read from the image and how much
memory should be reserved to the bss segment.

Signed-off-by: Göran Weinholt <goran@weinholt.se>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-29 09:33:56 -05:00
Dr. David Alan Gilbert
33fa8234c3 Fix last sector write on sd card
When writing the last sector of an SD card using WRITE_MULTIPLE_BLOCK
QEmu throws an error saying that we've run off the end, and leaves
itself in the wrong state.

    Tested on ARM Vexpress model.

Signed-off-by: Dr. David Alan Gilbert <david.gilbert@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-29 09:33:48 -05:00
wayne
3d3b8303c6 showing a splash picture when start
Added options to let qemu transfer two configuration files to bios:
"bootsplash.bmp" and "etc/boot-menu-wait", which could be specified by command
    -boot splash=P,splash-time=T
P is jpg/bmp file name or an absolute path, T have a max value of 0xffff, unit
is ms. With these two options, if user invoke qemu with menu=on option, then
a splash picture would be showed in a given time. For example:
    qemu -boot menu=on,splash=/root/boot.bmp,splash-time=5000
would make boot.bmp shown as a brand with 5 seconds in the booting up process.
This feature need the new seabios's support, which could be got from git.

Signed-off-by: Wayne Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-29 08:25:44 -05:00
Avi Kivity
6da48311bb usb-ohci: convert to MemoryRegion
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-29 08:25:44 -05:00
Avi Kivity
ec3bb837a2 sysbus: add MemoryRegion based memory management API
Allow registering sysbus device memory using a MemoryRegion.  Once all users
are converted, sysbus_init_mmio() and sysbus_init_mmio_cb() will be removed.

Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-29 08:25:44 -05:00
Avi Kivity
79ff8cb0df pci: add MemoryRegion based BAR management API
Allow registering a BAR using a MemoryRegion.  Once all users are converted,
pci_register_bar() and pci_register_bar_simple() will be removed.

Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-29 08:25:44 -05:00
Avi Kivity
1e39101c64 pci: pass address space to pci bus when created
This is now done sloppily, via get_system_memory().  Eventually callers
will be converted to stop using that.

Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-29 08:25:44 -05:00
Avi Kivity
6bd105151a pc: move global memory map out of pc_init1() and into its callers
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-29 08:25:44 -05:00
Avi Kivity
00cb2a99f5 pc: convert pc_memory_init() to memory API
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-29 08:25:44 -05:00
Avi Kivity
4aa63af149 pc: grab system_memory
While eventually this should come from the machine initialization function,
take a short cut to avoid converting all machines now.

Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-29 08:25:44 -05:00
Jan Kiszka
5ab28c8340 qdev: Reset hot-plugged devices
Device models rely on the core invoking their reset handlers after init.
We do this in the cold-plug case, but so far we miss this step after
hot-plug.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-29 08:17:40 -05:00
Isaku Yamahata
43e86c8f5b pcie_host: verify mmcfg address range
For a conventional pci device behind
a pcie-to-pci bridge, pci_host handlers get confused by
an out of bounds access in the range [256, 4K).

Check for such an access and make it have no effect.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-07-29 08:01:52 +03:00
Amit Shah
845f85fa15 virtio: Plug memleak by freeing vdev
virtio_common_init() allocates RAM for the vdev struct (and any
additional memory, depending on the size passed to the function).  This
memory wasn't being freed until now.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-07-27 20:19:27 +03:00
Amit Shah
b52dfd71f3 virtio-net: don't use vdev after virtio_cleanup
virtio_cleanup() will be changed by the following patch to remove the
VirtIONet struct that gets allocated via virtio_common_init().  Ensure
we don't dereference the structure after calling the cleanup function.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-07-27 20:18:47 +03:00
Amit Shah
d92551f28e virtio-blk: Fix memleak on exit
Calling virtio_cleanup() will free up memory allocated in
virtio_common_init().

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-07-27 20:08:19 +03:00
Michael S. Tsirkin
1129714ff4 virtio-pci: use generic logic for command access
In practice, guests don't generate config requests
that cross a word boundary, so the logic to
detect command word access is correct because
PCI_COMMAND is 0x4. But depending on this is
tricky, further, it will break with guests
that do try to generate a misaligned access
as we pass it to devices without splitting.

Better to use the generic range_covers_byte for this.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-07-27 20:08:15 +03:00
Jan Kiszka
42e4126b79 pci: Common overflow prevention
Introduce pci_config_read/write_common helpers to prevent passing
accesses down the callback chain that go beyond the config space limits.
Adjust length assertions as they are no longer correct (cutting may
generate valid 3 byte accesses).

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-07-27 10:57:22 +03:00
Stefano Stabellini
679f4f8b17 xen: implement unplug protocol in xen_platform
The unplug protocol is necessary to support PV drivers in the guest: the
drivers expect to be able to "unplug" emulated disks and nics before
initializing the Xen PV interfaces.
It is responsibility of the guest to make sure that the unplug is done
before the emulated devices or the PV interface start to be used.

We use pci_for_each_device to walk the PCI bus, identify the devices and
disks that we want to disable and dynamically unplug them.

Changes in v2:

- use PCI_CLASS constants;

- replace pci_unplug_device with qdev_unplug;

- do not import hw/ide/internal.h in xen_platform.c;

Changes in v3:

- introduce piix3-ide-xen, that support hot-unplug;

- move the unplug code to hw/ide/piix.c;

- just call qdev_unplug from xen_platform.c to unplug the IDE disks;

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-26 07:02:17 +02:00
Alexander Graf
59d21e537b xen: make xen_enabled even more clever
When using xen_enabled() we're currently only checking if xen is enabled
at all during the build. But what if you want to build multiple targets
out of which only one can potentially run xen code?

That means that for generic code we'll still have to fall back to the
variable and potentially slow the code down, but it's not as important as
that is mostly xen device emulation which is not touched for non-xen targets.

The target specific code however can with this patch see that it's unable to
ever execute xen code. We can thus always return 0 on xen_enabled(), giving
gcc enough hints to evict the mapcache code from the target memory management
code.

Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
2011-07-26 06:43:11 +02:00
Anthony PERARD
30ab61252b xen: Fix xen_enabled().
Use the "host" CONFIG_ define instead of the "target" one.

Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-26 06:43:10 +02:00
Blue Swirl
aad04cd024 Fix chrdev return value conversion
6e1db57b2a didn't
convert brlapi or win32 chrdevs, breaking build for those.

Fix by converting the chrdevs.

Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-24 14:48:57 +00:00
Matthew Fernandez
8e31bf388e Correct spelling of licensed
Correct typos of "licenced" to "licensed".

Reviewed-by: Stefan Weil <weil@mail.berlios.de>
Reviewed-by: Andreas F=E4rber <andreas.faerber@web.de>
Signed-off-by: Matthew Fernandez <matthew.fernandez@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23 11:26:12 -05:00
Jan Kiszka
17604dac28 mc146818rtc: Handle host clock resets
Make use of the new clock reset notifier to update the RTC whenever
rtc_clock is the host clock and that happens to jump backward. This
avoids that the RTC stalls for the period the host clock was set back.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23 11:26:12 -05:00
Jan Kiszka
9e8dd45164 notifier: Pass data argument to callback
This allows to pass additional information to the notifier callback
which is useful if sender and receiver do not share any other distinct
data structure.

Will be used first for the clock reset notifier.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23 11:26:06 -05:00
Markus Armbruster
e0e8384dd4 ide: Turn properties any IDE device must have into bus properties
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23 11:21:29 -05:00
Markus Armbruster
d6cca4b048 virtio-serial: Turn props any virtio-serial-bus device must have into bus props
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23 11:20:41 -05:00
Markus Armbruster
021a131860 virtio-serial: Clean up virtser_bus_dev_print() output
Old version looks like this in info qtree (last four lines):

          dev: virtconsole, id ""
            dev-prop: is_console = 1
            dev-prop: nr = 0
            dev-prop: chardev = <null>
            dev-prop: name = <null>
             dev-prop-int: id: 0
             dev-prop-int: guest_connected: 1
             dev-prop-int: host_connected: 0
             dev-prop-int: throttled: 0

Indentation is off, and "dev-prop-int" suggests these are properties
you can configure with -device, which isn't the case.  The other
buses' print_dev() callbacks don't do that.  For instance, PCI's
output looks like this:

        class Ethernet controller, addr 00:03.0, pci id 1af4:1000 (sub 1af4:0001)
        bar 0: i/o at 0xffffffffffffffff [0x1e]
        bar 1: mem at 0xffffffffffffffff [0xffe]
        bar 6: mem at 0xffffffffffffffff [0xfffe]

Change virtser_bus_dev_print() to that style.  Result:

          dev: virtconsole, id ""
            dev-prop: is_console = 1
            dev-prop: nr = 0
            dev-prop: chardev = <null>
            dev-prop: name = <null>
            port 0, guest on, host off, throttle off

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23 11:20:02 -05:00
Markus Armbruster
1cc2428cce usb-ccid: Drop unused CCIDCardInfo callback print()
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23 11:20:02 -05:00
Richard Henderson
0fe28e0d9f vga: Fix type of lfb/map_addr/end.
These addresses have been passed through pci_to_cpu_addr,
and thus need to be full target_phys_addr_t.

Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23 11:19:02 -05:00
Kevin Wolf
6e1db57b2a qemu-char: Print strerror message on failure
The only way for chardev drivers to communicate an error was to return a NULL
pointer, which resulted in an error message that said _that_ something went
wrong, but not _why_.

This patch changes the interface to return 0/-errno and updates
qemu_chr_open_opts to use strerror to display a more helpful error message.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23 11:18:57 -05:00
Adam Lackorzynski
49e40b6627 multiboot: Support commas in module parameters
Support commas in the parameter list of multiboot modules as well as for the
kernel command line, by using double commas (via get_opt_value()).

Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23 10:56:55 -05:00
Paolo Bonzini
6141dbfe0a report serial devices created with -device in the PIIX4 config space
Serial and parallel devices created with -device are not reported in
the PIIX4 configuration space, and are hence not picked up by the DSDT.
This upsets Windows, which hides them altogether from the guest.

To avoid this, check at the end of machine initialization whether the
corresponding I/O ports have been registered.  The new function in
ioport.c does this; this also requires a tweak to isa_unassign_ioport.

I left the comment in piix4_pm_initfn since the registers I moved do
seem to match the 82371AB datasheet.  There are some quirks though.
We are setting this bit:

    "Device 8 EIO Enable (EIO_EN_DEV8)—R/W. 1=Enable PCI access to the
    device 8 enabled I/O ranges to be claimed by PIIX4 and forwarded
    to the ISA/EIO bus. 0=Disable. The LPT_MON_EN must be set to enable
    the decode."

but not LPT_MON_EN (bit 18 at 50h):

    LPT Port Enable (LPT_MON_EN)—R/W. 1=Enable accesses to parallel
    port address range (LPT_DEC_SEL) to generate a device 8 (parallel
    port) decode event. 0=Disable.

We're also setting the LPT_DEC_SEL field (that's the 0x60 written to
63h) to 11, which means reserved, rather than to 01 (378h-37Fh).

Likewise we're not setting SA_MON_EN, SB_MON_EN (respectively bit 14
and bit 16 at address 50h) for the serial ports.  However, we're setting
COMA_DEC_SEL and COMB_DEC_SEL correctly, unlike the corresponding register
for the parallel port.

All these fields are left as they are, since they are probably only
meant to be used in the DSDT.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23 10:56:55 -05:00
Jan Kiszka
6eed18568d net: Consistently use qemu_macaddr_default_if_unset
Drop the open-coded MAC assignment from net_init_nic and replace it with
standard qemu_macaddr_default_if_unset which is also used by qdev. That
avoid creating colliding MACs when instantiating NICs via different
mechanisms.

This change requires to store the MAC as MACAddr in NICInfo, and the
remaining nd_table users need to be updated.

Based on suggestion by Peter Maydell.

CC: Markus Armbruster <armbru@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23 10:19:50 -05:00
Anthony Liguori
e07fc405dc Merge remote-tracking branch 'spice/spice.v39' into staging 2011-07-22 09:24:07 -05:00
Anthony Liguori
cfe7bb19d2 Merge remote-tracking branch 'kraxel/usb.21' into staging 2011-07-22 09:23:49 -05:00
Anthony Liguori
bf1cd9b4f5 Merge remote-tracking branch 'kwolf/for-anthony' into staging 2011-07-22 09:23:43 -05:00
Gerd Hoffmann
0070f095d9 usb-uhci: fix irq handling on error.
Spec on UHCI_STS_USBERR: "If the TD on which the error interrupt
occurred also had its IOC bit set, both this bit and Bit 0 are set."

Make UHCI emulation do that.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-22 13:36:31 +02:00
Gerd Hoffmann
e7e73892a6 usb-hid: fixup changed tracking.
Remove leftover calls to usb_hid_changed().

Take care to update the changed flag after delivering a event via
GET_REPORT like we do when sending events via interrupt endpoint.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-22 13:36:31 +02:00
Hervé Poussineau
cd3e2409a3 ds1225y: convert to qdev device, and use it in MIPS Jazz emulation
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-20 20:54:51 +00:00
Hervé Poussineau
d43ed9ec25 ds1225y: use trace framework
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-20 20:54:50 +00:00
Hervé Poussineau
86f25c7c37 ds1225y: Remove protection stuff, which doesn't belong to this device
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-20 20:54:49 +00:00
Gerd Hoffmann
98e51ec92e usb-serial doesn't support migration
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-20 14:49:41 +02:00
Gerd Hoffmann
4ab0ba9e26 usb-net doesn't support migration
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-20 14:49:41 +02:00
Gerd Hoffmann
2474e5052b usb-bt doesn't support migration
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-20 14:49:41 +02:00
Gerd Hoffmann
ccce9fd205 usb-wacom doesn't support migration
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-20 14:49:41 +02:00
Gerd Hoffmann
f54b656303 usb storage: first migration support bits.
Tag vmstate as unmigratable for the time being,
to be removed when mgration support is finished.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-20 14:49:41 +02:00
Gerd Hoffmann
9490fb0624 ehci doesn't support migration
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-20 14:49:41 +02:00
Gerd Hoffmann
b7ce1b27f6 ahci doesn't support migration
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-20 14:49:41 +02:00
Yonit Halperin
8927cfbba2 qxl: upon reset, if spice worker is stopped, the command rings can be not empty
Spice worker does no longer process commands when it is stopped.
Otherwise, it might crash during migration when attempting to process
commands while the guest is not completely loaded.

Cc: Alon Levy <alevy@redhat.com>

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-20 10:08:53 +02:00
Gerd Hoffmann
2837c8ea1f vmstate: add no_migrate flag to VMStateDescription
This allows to easily tag devices as non-migratable,
so any attempt to migrate a virtual machine with the
device in question active will make migration fail.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-20 09:23:33 +02:00
Hannes Reinecke
3e1c0c9a4b scsi-disk: Mask out serial number EVPD
If the serial number is not set we should mask it out in the
list of supported VPD pages and mark it as not supported.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-19 15:39:05 +02:00
Hannes Reinecke
653c1c3fb6 scsi-disk: Fixup debugging statement
A debugging statement wasn't converted to the new interface.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-19 15:39:05 +02:00
Hannes Reinecke
c5bf71a9a3 scsi: Add 'hba_private' to SCSIRequest
'tag' is just an abstraction to identify the command
from the driver. So we should make that explicit by
replacing 'tag' with a driver-defined pointer 'hba_private'.
This saves the lookup for driver handling several commands
in parallel.
'tag' is still being kept for tracing purposes.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-19 15:38:58 +02:00
Anthony Liguori
03ff09580e Merge remote-tracking branch 'agraf/xen-next' into staging 2011-07-19 08:04:35 -05:00
Anthony Liguori
b4dabf9587 Merge remote-tracking branch 'kraxel/usb.19' into staging 2011-07-19 08:03:20 -05:00
Anthony Liguori
de20fbcac9 Merge remote-tracking branch 'spice/spice.v38' into staging 2011-07-19 08:02:35 -05:00
Anthony Liguori
6734529435 Merge remote-tracking branch 'mst/for_anthony' into staging 2011-07-19 07:43:54 -05:00
Hannes Reinecke
348e7b8dcd iov: Update parameter usage in iov_(to|from)_buf()
iov_to_buf() has an 'offset' parameter, iov_from_buf() hasn't.
This patch adds the missing parameter to iov_from_buf().
It also renames the 'offset' parameter to 'iov_off' to
emphasize it's the offset into the iovec and not the buffer.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-18 16:06:27 +02:00
Amit Shah
0219d73283 virtio-console: Prevent abort()s in case of host chardev close
A host chardev could close just before the guest sends some data to be
written.  This will cause an -EPIPE error.  This shouldn't be propagated
to virtio-serial-bus.

Ideally we should close the port once -EPIPE is received, but since the
chardev interface doesn't return such meaningful values to its users,
all we get is -1 for any kind of error.  Just return 0 for now and wait
for chardevs to return better error messages to act better on the return
messages.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
2011-07-18 15:30:15 +05:30
Amit Shah
95c9cde2df virtio-serial-bus: Fix trailing \n in error_report string
Markus fixed offenders in the file but one instance sneaked in via
another patch.  Fix it.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
2011-07-18 15:30:15 +05:30
Amit Shah
d02e4fa4a8 virtio-console: Add some trace events
Add some trace events for messages passed between the char layer and the
virtio-serial bus.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
2011-07-18 15:30:14 +05:30
Amit Shah
49e3fdd7f2 virtio-serial-bus: Add trace events
Add some trace events for messages passed between the guest and host.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
2011-07-18 15:30:14 +05:30
Michael S. Tsirkin
c8eac1cfa1 virtio: fix indirect descriptor buffer overflow
We were previously allowing arbitrarily-long indirect descriptors, which
could lead to a buffer overflow in qemu-kvm process.

CVE-2011-2212

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-07-17 18:47:34 +03:00
Michael S. Tsirkin
0d2b962d16 xen: move to new pci initializers
move ids to pci info structure

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-07-17 18:47:34 +03:00
Anthony PERARD
ce4fd422a6 hw/piix_pci.c: Fix PIIX3-xen to initialize ids
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-07-17 18:47:34 +03:00
Michael S. Tsirkin
33d5ad53c1 pci_ids: tweak names to match linux/pci_ids.h
Sync xen names to ones used by linux. Add
xen platform device id as well.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-07-17 18:47:34 +03:00
Michael S. Tsirkin
c1be973ae1 vhost: fix double free on device stop
vhost dev stop failed to clear the log field.
Typically not an issue as dev start overwrites this field,
but if logging gets disabled before the following start,
it doesn't so this causes a double free.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-07-17 18:47:33 +03:00
Alexander Graf
25a118130f xen_console: fall back to qemu serial device
The new xen_console protocol changed the default xen_console output device
from whatever Qemu chose to whatever xenstore choses and "pty" as fallback.

This is not how Qemu works. It has its own serial redirection semantics. So
it xenstore doesn't contain information on what to do, Qemu is the place to
ask.

Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-17 01:54:25 +02:00
Stefano Stabellini
0f51726adc xen_console: support the new extended xenstore protocol
Since CS 21994 on xen-unstable.hg and CS
466608f3a32e1f9808acdf832a5843af37e5fcec on qemu-xen-unstable.git, few
changes have been introduced to the PV console xenstore protocol, as
described by the document docs/misc/console.txt under xen-unstable.hg.

From the Qemu point of view, very few modifications are needed to
correctly support the protocol: read from xenstore the "output" node
that tell us what the output of the PV console is going to be.
In case the output is a tty, write to xenstore the device name.

Changes in v2:

- fix error paths: free malloc'ed strings and close the xenstore
connection before returning;

- remove useless snprintf in xenstore_store_pv_console_info if i == 0.

Changes in v3:

- replace xs_daemon_open/xs_daemon_close with xs_open/xs_close.

Changes in v4:

- add a compatibility implementation of xs_open/xs_close.

Changes in v5:

- fix code style.

[agraf] fix build error due to missing stub

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-17 01:54:25 +02:00
Stefano Stabellini
7cef3f4fdb xen_disk: treat "aio" as "raw"
Sometimes the toolstack uses "aio" without an additional format
identifier, in such cases use "raw".

Updated in v2:

- fix code style.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-17 01:54:25 +02:00
Stefano Stabellini
5ea3c2b405 xen_disk: cope with missing xenstore "params" node
When disk is a cdrom and the drive is empty the "params" node in
xenstore might be missing completely: cope with it instead of
segfaulting.

Updated in v2:

- actually removed the strchr(blkdev->params, ':') that caused the
segfault;

- free all the allocated strings from xenstore before returning;

Updated in v3:

- set blkdev fields to NULL after free'ing them.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-17 01:54:25 +02:00
Stefano Stabellini
37cdfcf194 xen: add vkbd support for PV on HVM guests
Register the vkbd backend even when running as device emulator for HVM
guests: it is useful because it doesn't need a frequent timer like usb.

Check whether the XenInput DisplayState has been set in the initialise
state, rather than the input state.
In case the DisplayState hasn't been set and there is no vfb for this
domain, then set the XenInput DisplayState to the default one.

Changed in v2:

- use qemu_free instead of free;

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-17 01:54:25 +02:00
Stefano Stabellini
5e6b701aba xen_console: fix memory leak
con_init leaks the string "type", fix it.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-17 01:54:25 +02:00
Jan Kiszka
868bb33faa xen: Fold CONFIG_XEN_MAPCACHE into CONFIG_XEN
Xen won't be enabled if there is no backend support available for the
host. And that also means the map cache will work. So drop the separate
config switch and move the required stubs over to xen-stub.c.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-07-17 01:54:24 +02:00
Hervé Poussineau
429bef6912 esp: cancel current request only if some request is in flight
This bug was introduced in 94d3f98a3f:
scsi_cancel_io was checking if some request was pending before trying
to cancel it, while scsi_req_cancel always cancels the request.

This may lead to a crash of Qemu due to dereferencing a NULL pointer,
as exhibited by NetBSD 5.1 installer on MIPS Magnum emulation.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12 21:29:39 +00:00
Alexander Graf
06c46bbab0 spapr: use specific endian ld/st_phys
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12 20:00:33 +00:00
Alexander Graf
04bc74edec s390-virtio: use specific endian ld/st_phys
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12 20:00:32 +00:00
Alexander Graf
db663d0f7a ppc405_uc: use specific endian ld/st_phys
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12 20:00:31 +00:00
Alexander Graf
75b0646f9e pl080: use specific endian ld/st_phys
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12 20:00:30 +00:00
Alexander Graf
ae5d3eb474 msix: use specific endian ld/st_phys
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12 20:00:29 +00:00
Alexander Graf
c5d29d2fec msi: use specific endian ld/st_phys
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12 20:00:28 +00:00
Alexander Graf
6c7796e5c1 intel-hda: use specific endian ld/st_phys
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12 20:00:27 +00:00
Alexander Graf
8517263fcb hpet: use specific endian ld/st_phys
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-12 20:00:26 +00:00
Gerd Hoffmann
3dc345d587 usb-ohci: raise interrupt on attach
Got lost in commit 618c169b57,
add it back in.  Also fix codestyle while we are at it.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-08 11:26:10 +02:00
Gerd Hoffmann
6c2385270b usb-hub: remove unused descriptor arrays
Somehow they where left over when converting the hub
to the new usb descriptor infrastructure ...

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-08 11:26:10 +02:00
Gerd Hoffmann
dd850cf203 usb: fixup bluetooth descriptors
Commit 4696425cd0 changes some
endpoints from isocrounous to interrupt by mistake.  Fix it.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-08 11:26:10 +02:00
Jes Sorensen
eb3b58f96f usb_register_port(): do not set port->opaque and port->index twice
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-08 11:26:10 +02:00
Gerd Hoffmann
3028376ea0 ehci: add ich9 controller.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-05 15:09:02 +02:00
Gerd Hoffmann
5cc194caeb ehci: fix port count.
The ICH4 EHCI controller which we emulate has six ports not four.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-05 15:09:02 +02:00
Gerd Hoffmann
1b5a757067 uhci: add ich9 controllers
Add ich9 controllers,  Factor out properties to a separate
struct and reference it to reduce duplication.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-05 15:09:02 +02:00
Gerd Hoffmann
f9ebf5e564 pci: add ich9 usb controller ids
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-05 15:09:02 +02:00
Hans de Goede
9c9fc3346b usb-ohci: Add support for being a companion controller
To use as a companion controller, use pci-ohci as device and set the
masterbus and num-ports properties, ie:

-device usb-ehci,addr=0b.1,multifunction=on,id=ehci0
-device pci-ohci,addr=0b.0,multifunction=on,masterbus=ehci0.0,num-ports=4

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-05 15:09:02 +02:00
Hans de Goede
35e4977f57 usb-uhci: Add support for being a companion controller
To use as a companion controller set the masterbus property.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-05 15:09:02 +02:00
Hans de Goede
a0a3167a91 usb-ehci: Add support for registering companion controllers
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-05 15:09:02 +02:00
Hans de Goede
fbd97532d2 usb-ehci: Fix handling of PED and PEDC port status bits
The PED bit should only be set for highspeed devices and the PEDC bit
should not be set on "normal" PED bit changes, only on io errors.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-05 15:09:02 +02:00
Hans de Goede
45b9fd3480 usb: assert on calling usb_attach(port, NULL) on a port without a dev
with the "usb-ehci: cleanup port reset handling" patch in place no callers
are calling usb_attach(port, NULL) for a port where port->dev is NULL.

Doing that makes no sense as that causes the port detach op to get called
for a port with nothing attached. Add an assert that port->dev != NULL when
dev == NULL, and remove the check for not having a port->dev in the dev == NULL
case.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-05 15:09:02 +02:00
Hans de Goede
fbf9db6457 usb-ehci: cleanup port reset handling
Doing a usb_attach when dev is NULL will just result in the
port detach op getting called even though nothing was connected in
the first place.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-05 15:09:02 +02:00
Hans de Goede
c44fd61c0f usb-ehci: Connect Status bit is read only, don't allow changing it by the guest
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-05 15:09:02 +02:00
Hans de Goede
053f9fcfb1 usb-ehci: drop unused num-ports state member
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-05 15:09:02 +02:00
Hans de Goede
4706ab6cc0 usb: Replace device_destroy bus op with a child_detach port op
Note this fixes 2 things in one go, first of all the device_destroy bus
op should be a device_detach bus op, as pending async packets from the
device should be cancelled on detach not on destroy.

Secondly having this as a bus op won't work with companion controllers, since
then there will be 1 bus driven by the ehci controller and thus 1 set of bus
ops, but the device being detached may be downstream of a handed over port.
Making the detach of a downstream device a port op allows the ehci controller
to forward this to the companion controller port for handed over ports.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-05 15:09:02 +02:00
Hans de Goede
d47e59b8b8 usb: Make port wakeup and complete ops take a USBPort instead of a Device
This makes them consistent with the attach and detach ops, and in general
it makes sense to make portops take a port as argument. This also makes
adding support for a companion controller easier / cleaner.

[ kraxel: fix usb-musb.c build ]

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-05 15:09:02 +02:00
Hans de Goede
ae60fea97c usb: Add a register_companion USB bus op.
This is a preparation patch for adding support for USB companion controllers.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-05 15:09:02 +02:00
Hans de Goede
3631e6c8c2 usb: Move (initial) call of usb_port_location to usb_fill_port
Cleanup / preparation patch for companion controller support. Note that
as a "side-effect" this patch also fixes the milkymist-softusb controller
not having a port_location set for its ports.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-05 15:09:02 +02:00
Hans de Goede
090ac6425a usb: Add a usb_fill_port helper function
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-05 15:09:01 +02:00
Peter Maydell
000eb4fa52 hw/usb-musb.c: Don't misuse usb_packet_complete()
In musb_packet() handle final processing of non-asynchronous
USB packets by directly calling musb_schedule_cb() rather than
going through usb_packet_complete(). The latter will trigger
an assertion because the packet doesn't belong to a device.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-05 15:09:01 +02:00
Kevin Wolf
c925400ba8 ide: Initialise buffers with zeros
Just in case there's still a way how a guest can read out buffers when it's not
supposed to, let's zero the buffers during initialisation so that we don't leak
information to the guest.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2011-07-05 11:23:43 +02:00
Kevin Wolf
40c4ed3f95 ide: Ignore reads during PIO in and writes during PIO out
This fixes https://bugs.launchpad.net/qemu/+bug/786209:

    When the DRQ_STAT bit is set, the IDE core permits both data reads
    and data writes, regardless of whether the current transfer was
    initiated as a read or write.

    This potentially leaks uninitialized host memory into the guest,
    if, before doing anything else to an IDE device, the guest begins a
    write transaction (e.g. WIN_WRITE), but then *reads* from the IO
    port instead of writing to it.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2011-07-05 11:23:42 +02:00
Markus Armbruster
a8686a9b2b virtio-blk: Turn drive serial into a qdev property
It needs to be a qdev property, because it belongs to the drive's
guest part.  Precedence: commit a0fef654 and 6ced55a5.

Bonus: info qtree now shows the serial number.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-05 11:23:29 +02:00
Vasily Khoruzhick
9312805d33 pxa2xx_lcd: add proper rotation support
Until now, pxa2xx_lcd only supported 90deg rotation, but
some machines (for example Zipit Z2) needs 270deg rotation.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-04 22:12:21 +02:00
Stefan Weil
462a8bc646 arm: Add const attribute to some arm_boot_info pointers
Parameter 'info' is const, so add the missing attribute.

v2:
Add 'const' to the local variable info in do_cpu_reset() and to
the boot_info field in CPUARMState (suggested by Peter Maydell).

Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-07-04 21:58:25 +02:00
Alon Levy
a3d14054d7 qxl: allow QXL_IO_LOG also in vga
The driver may change us to vga mode and still issue a QXL_IO_LOG,
which we can easily support.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-04 15:35:12 +02:00
Gerd Hoffmann
81144d1a36 qxl: put QXL_IO_UPDATE_IRQ into vgamode whitelist
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-04 15:35:12 +02:00
Yonit Halperin
868379ce69 qxl: make sure primary surface is saved on migration
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-04 15:35:12 +02:00
Alon Levy
6ebebb551a qxl: add dev id to guest prints
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-04 15:35:12 +02:00
Alon Levy
1f0ff2fb99 qxl-logger: add timestamp to command log
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-04 15:35:12 +02:00
Alon Levy
5b77870ce0 qxl: interface_get_command: fix reported mode
report correct mode when in undefined mode.
introduces qxl_mode_to_string(), and uses it in other places too.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-04 15:35:12 +02:00
Gerd Hoffmann
638f4e4779 qxl: device id fixup
Move device ID to PCIDeviceInfo.
Remove support for the unused unstable device ID.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-07-04 15:35:12 +02:00
Hervé Poussineau
75ef849696 esp: correctly fill bus id with requested lun
This bug showed up after 1455084ea2, and
may be seen only on operating systems *not* using DMA to give commands
to SCSI adapter.

Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-07-02 18:50:19 +00:00
Blue Swirl
3b88670664 Merge branch 'ppc-next' of git://repo.or.cz/qemu/agraf
* 'ppc-next' of git://repo.or.cz/qemu/agraf:
  PPC: move TLBs to their own arrays
  PPC: 440: Use 440 style MMU as default, so Qemu knows the MMU type
  PPC: E500: Use MAS registers instead of internal TLB representation
  PPC: Only set lower 32bits with mtmsr
  PPC: update openbios firmware
  PPC: mpc8544ds: Add hypervisor node
  PPC: calculate kernel,initrd,cmdline locations dynamically
  target-ppc: Handle memory-forced I/O controller access
  PPC: E500: Implement reboot controller
2011-07-01 21:12:50 +00:00
Edgar E. Iglesias
20be39de59 etraxfs-ser: Correct default value for RW_REC_CTRL
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-06-30 10:52:22 +02:00
Anthony Liguori
656acddb39 Merge remote-tracking branch 'kraxel/usb.17' into staging 2011-06-27 14:59:08 -05:00
Anthony Liguori
c45d1fc191 Merge remote-tracking branch 'amit/for-anthony' into staging 2011-06-27 11:27:15 -05:00
Anthony Liguori
bb820c03e2 Merge remote-tracking branch 'stefanha/trivial-patches' into staging 2011-06-27 11:25:23 -05:00
Luiz Capitulino
d2e4d08b3e virtio-serial: Fix segfault on guest boot
If I start qemu with:

  # qemu -hda disks/test.img -enable-kvm -m 1G -snapshot \
         -device virtio-serial \
         -chardev socket,host=localhost,port=1234,server,nowait,id=foo \
         -device virtserialport,chardev=foo,name=org.qemu.guest_agent

I get a segfault when booting a Fedora 14 guest. The backtrace says:

  Program terminated with signal 11, Segmentation fault.
    #0  0x0000000000420850 in handle_control_message (vser=0x3732bd0, buf=0x2c173e0, len=8) at /home/lcapitulino/src/qmp-unstable/hw/virtio-serial-bus.c:335
    335     info = DO_UPCAST(VirtIOSerialPortInfo, qdev, port->dev.info);

What's happening is VIRTIO_CONSOLE_DEVICE_READY is a message for the
whole device, not for an individual port. So port is NULL. This bug was
introduced by commit a15bb0d6a9.

This commit fixes that by making the port returned by find_port_by_id()
be used only by the VIRTIO_CONSOLE_PORT_READY and
VIRTIO_CONSOLE_PORT_OPEN messages.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
2011-06-27 15:04:54 +05:30
Blue Swirl
2b41f10e18 Remove exec-all.h include directives
Most exec-all.h include directives are now useless, remove them.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26 18:25:35 +00:00
Jan Kiszka
af2be20777 Fix fallouts from Linux header inclusion
This is an all-in-one fix for the smaller and bigger mistakes of the
build system changes for accompanied Linux headers:
 - only enable KVM and vhost on Linux hosts
 - fix powerpc asm header symlink
 - do not use Linux headers on non-Linux hosts
 - fix kvmclock for !CONFIG_KVM
 - fix s390 build on non-Linux hosts

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Tested-by: Andreas Färber <andreas.faerber@web.de>
Tested-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26 17:35:47 +00:00
Matthew Fernandez
2167f7bc28 Fix comment typos in hw/armv7m.c
Fix a couple of typos in comments.

Signed-off-by: Matthew Fernandez <matthew.fernandez@gmail.com>
Acked-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-06-24 09:13:37 +01:00
Markus Armbruster
dd3d677512 Spell "unkown" correctly in error_report() arguments
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-06-24 09:13:37 +01:00
Markus Armbruster
6daf194dde Strip trailing '\n' from error_report()'s first argument
error_report() prepends location, and appends a newline.  The message
constructed from the arguments should not contain a newline.  Fix the
obvious offenders.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-06-24 09:13:36 +01:00
Gerd Hoffmann
a7fb71d1b2 usb: ignore USB_DT_DEBUG
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-23 17:15:55 +02:00
Markus Armbruster
c3a90cb120 usb-storage: Turn drive serial into a qdev property usb-storage.serial
It needs to be a qdev property, because it belongs to the drive's
guest part.  Precedence: commit a0fef654 and 6ced55a5.

Bonus: info qtree now shows the serial number.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-23 17:09:31 +02:00
Peter Maydell
f3dc0051dc hw/usb-ohci.c: Fix handling of remote wakeup corner cases
Correct a number of minor errors in the OHCI wakeup implementation:
 * when the port is suspended but the controller is not, raise RHSC
 * when the controller is suspended but the port is not, raise RD
 * when the controller is suspended, move it to resume state

These fix some edge cases where a USB device might not successfully get
the attention of the guest OS if it tried to do so at the wrong time.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-23 11:28:07 +02:00
Hans de Goede
bf5547f536 usb-bus: Don't allow speed mismatch while attaching devices
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-23 11:28:07 +02:00
Hans de Goede
ba3f9bfba9 usb: Add a speedmask to devices
This is used to indicate at which speed[s] the device can operate,
so that this can be checked to match the ports capabilities when it gets
attached to a bus.

Note that currently all usb1 emulated device claim to be fullspeed, this
seems to not cause any problems, but still seems wrong, because with real
hardware keyboards, mice and tablets usually are lo-speed, so reporting these
as fullspeed devices seems wrong.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-23 11:28:06 +02:00
Hans de Goede
fa19bf831b usb: Proper error propagation for usb_device_attach errors
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-23 11:28:06 +02:00
Hans de Goede
ee210d6390 usb-bus: Don't allow attaching a device to a bus with no free ports
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-23 11:28:06 +02:00
Gerd Hoffmann
adddecb169 ehci: switch to nanoseconds
Make ehci use nanoseconds everywhere.
Simplifies time calculations.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-23 11:28:06 +02:00
Gerd Hoffmann
16a2dee6b9 ehci: add freq + maxframes properties
Add properties for the wakeup rate and the max number of frames ehci
will process at once.

The wakeup rate defaults to 1000 which equals the usb frame rate.  This
can be reduced to make qemu wake up less often when ehci is active.

In case the wakeup rate is reduced or the ehci timer is delayed due to
latency issues elsewhere in qemu ehci will process multiple frames at
once.  The maxframes property specifies the upper limit for this.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-23 11:28:06 +02:00
Peter Maydell
48e2faf222 net: Warn about "-net nic" options which were ignored
Diagnose the case where the user asked for a NIC via "-net nic"
but the board didn't instantiate that NIC (for example where the
user asked for two NICs but the board only supports one). Note
that this diagnostic doesn't apply to NICs created through -device,
because those are always instantiated.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-06-22 07:18:39 -05:00
Avi Kivity
f8e378f27f Optimize screendump
When running kvm-autotest, fputc() is often the second highest (sometimes #1)
function showing up in a profile.  This is due to fputc() locking the file
for every byte written.

Optimize by buffering a line's worth of pixels and writing that out in a
single call.

Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-06-22 07:18:38 -05:00
Anthony Liguori
d6034a3a61 Merge remote-tracking branch 'qemu-kvm/uq/master' into staging 2011-06-22 07:13:10 -05:00
Anthony Liguori
fdba9594df Merge remote-tracking branch 'mst/for_anthony' into staging
Conflicts:
	hw/usb-uhci.c
2011-06-22 07:11:09 -05:00
Anthony Liguori
7ee28fd303 Merge remote-tracking branch 'agraf/xen-next' into staging 2011-06-22 07:07:55 -05:00
Jan Kiszka
5802e066eb kvm: Drop CONFIG_KVM_PARA
The kvm_para.h header is now always available.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2011-06-20 15:16:45 -03:00
Christophe Fergeau
bf79d49982 lsi: Fix unused-but-set-variable warning
This warning is new in gcc 4.6.

Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-06-20 16:42:35 +01:00
Steven Smith
01195b7347 xen: Add the Xen platform pci device
Introduce a new emulated PCI device, specific to fully virtualized Xen
guests.  The device is necessary for PV on HVM drivers to work.

Signed-off-by: Steven Smith <ssmith@xensource.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-19 04:43:04 +02:00
Stefano Stabellini
bf09551a6b xen: fix interrupt routing
Compared to the last version I only added a comment to the code.

- remove i440FX-xen and i440fx_write_config_xen
we don't need to intercept pci config writes to i440FX anymore;

- introduce PIIX3-xen and piix3_write_config_xen
we do need to intercept pci config write to the PCI-ISA bridge to update
the PCI link routing;

- set the number of PIIX3-xen interrupts line to 128;

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-19 04:42:57 +02:00
Stefano Stabellini
45dcd36e1e cirrus_vga: reset lfb_addr after a pci config write if the BAR is unmapped
If the cirrus_vga PCI BAR is unmapped than we should not only reset
map_addr but also lfb_addr, otherwise we'll keep trying to map
the old lfb_addr in map_linear_vram.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-19 04:40:05 +02:00
Anthony PERARD
b87de24e6c xen: Add xc_domain_add_to_physmap to xen_interface.
This function will be used to support sync dirty bitmap.

This come with a check against every Xen release, and special
implementation for Xen version that doesn't have this specific call.

This function will not be usable with Xen 3.3 because the behavior is
different.

Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-19 04:40:04 +02:00
Alexander Graf
1c53acccee PPC: move TLBs to their own arrays
Until now, we've created a union over multiple different TLB types and
allocated that union. While it's a waste of memory (and cache) to allocate
TLB information for a TLB type with much information when you only need
little, it also inflicts another issue.

With the new KVM API, we can now share the TLB between KVM and qemu, but
for that to work we need to have both be in the same layout. We can't just
stretch it over to fit some internal different TLB representation.

Hence this patch moves all TLB types to their own array, allowing us to only
address and allocate exactly the boundaries required for the specific TLB
type at hand.

Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-17 02:58:37 +02:00
Alexander Graf
0dd4bc7dd4 PPC: 440: Use 440 style MMU as default, so Qemu knows the MMU type
We have some KVM interaction code in Qemu that tries to be clever and
ignore some capabilities when running on BookE style MMUs. Unfortunately,
the default CPU bamboo was defaulting to was not a BookE-style MMU,
resulting in the check to fail.

With this patch, guests can run again on 440 with -enable-kvm.

Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-17 02:58:35 +02:00
Alexander Graf
d1e256fe47 PPC: E500: Use MAS registers instead of internal TLB representation
The natural format for e500 cores to do TLB manipulation with are the MAS
registers. Instead of converting them into some internal representation
and back again when the guest reads them, we can just keep the data
identical to the way the guest passed it to us.

The main advantage of this approach is that we're getting closer to being
able to share MMU data with KVM using shared memory, so that we don't need
to copy lots of MMU data back and forth all the time. For this to work
however, another patch is required that gets rid of the TLB union, as that
destroys our memory layout that needs to be identical with the kernel one.

Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-17 02:58:34 +02:00
Alexander Graf
5de6b46db5 PPC: mpc8544ds: Add hypervisor node
When running a PPC guest with KVM that can do PV operations, we need
to indicate the guest which instructions to use for a hypercall and
that it is running as KVM guest.

This logic was available on openbios based machines already. This patch
also adds said functionality to the mpc8544ds machine.

Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Scott Wood <scottwood@freescale.com>
2011-06-17 02:58:28 +02:00
Alexander Graf
b9e17a3453 PPC: calculate kernel,initrd,cmdline locations dynamically
During testing, I was generating a vmlinux binary that easily occupied
more than 20MB of RAM. Since the current -kernel code loads the initrd
at a fixed address behind the kernel, we were overwriting kernel data
when the kernel got too big.

To finally get rid of the issue, let's calculate the initrd and cmdline
addresses relative to the kernel size, so we can have kernels and initrds
that are as big as they want to - as long as they fit in RAM.

Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-17 02:58:27 +02:00
Alexander Graf
b0fb84236d PPC: E500: Implement reboot controller
When Linux reboots an e500 VM, it writes to a magic register in the
"global-utilities" device indicated by the device tree. We were not
emulating that device so far, rendering the VM reboot-less.

This patch implements that device with only the reboot functionality
implemented and adds it to the device tree. With this patch applied,
I can successfully reboot a -M mpc8544ds VM.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Andreas Färber <andreas.faerber@web.de>
2011-06-17 02:58:23 +02:00
Michael S. Tsirkin
0e6264db2c wdt: remove unused variables
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
2011-06-16 00:20:12 +03:00
Michael S. Tsirkin
9047c0b406 usb-ehci: move device/vendor/class id to qdev
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-06-15 18:32:08 +03:00
Michael S. Tsirkin
cdfdec7f10 ppce500: move device/vendor/class id to qdev
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-06-15 18:32:08 +03:00
Isaku Yamahata
c2afc92290 pci: don't call qdev pci init method
As pci id initialization is moved to common layer,
some initialization function can be empty.
So don't call init method if NULL.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-06-15 18:32:08 +03:00
Michael S. Tsirkin
befeac45d4 Merge remote-tracking branch 'origin/master' into pci
Conflicts:
	hw/virtio-pci.c
2011-06-15 18:27:15 +03:00
Peter Maydell
eb47d7c5d9 hw/9118.c: Implement active-low interrupt support
The 9118 ethernet controller interrupt line is active low unless
the IRQ config register is programmed to set both the IRQ_POL
(polarity: active-high) and IRQ_TYPE (type: push-pull) bits:
implement support for inverting the irq output in other configurations.
This also requires that we support setting the bits in the first
place, and that we correctly preserve them across software reset.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-06-15 13:23:37 +02:00
Juha Riihimäki
1e36f6a5b5 smc91c111: qdevify reset
Register the smc91c111 reset function as a qdev reset function.

Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-15 19:46:46 +00:00
Anthony Liguori
f897235e0a Merge remote-tracking branch 'kraxel/usb.16' into staging 2011-06-15 09:03:22 -05:00
Anthony Liguori
1f8bedba79 Merge remote-tracking branch 'kwolf/for-anthony' into staging 2011-06-15 09:02:18 -05:00
Kevin Wolf
ee752da74f ide: Clear error_status after restarting flush
Clearing the error status flag was missing for restarting flushes. Now that the
error status is separate from the BM status register, we can simply set it to 0
after restarting the request. This ensures that we never forget to clear a bit.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-06-15 15:39:13 +02:00
Christoph Hellwig
d353fb72f5 ide: add TRIM support
Add support for TRIM sub function of the data set management command,
and wire it up to the qemu discard infrastructure.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-06-15 14:36:16 +02:00
Christoph Hellwig
4e1e00515e ide: allow other dma comands than read and write
Replace the is_read flag with a dma_cmd flag to allow the dma and
restart logic to handler other commands like TRIM.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-06-15 14:36:16 +02:00
Kevin Wolf
0754f9ecef ide: Add forgotten VMSTATE_END_OF_LIST in subsection
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-06-15 14:36:16 +02:00
Kevin Wolf
fdc650d76d ide: Fix ide_drive_pio_state_needed()
When a failed PIO request caused the VM to stop, we still need to transfer the
PIO state even though DRQ=0 at this point.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-06-15 14:36:15 +02:00
Kevin Wolf
def93791f2 ide: Split error status from status register
When adding the werror=stop mode, some flags were added to s->status
which are used to determine what kind of operation should be restarted
when the VM is continued.

Unfortunately, it turns out that s->status is in fact a device register
and as such is visible to the guest (some of the abused bits are even
writable for the guest).

For migration we keep on using the old VMState field (renamed to
migration_compat_status) if the status register doesn't use any of the
previously abused bits. If it does, we use a subsection with a clean copy of
the status register.

The error status is always sent in a subsection if there is any error. It can't
use the old field because errors happen even without PCI.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-06-15 14:36:15 +02:00
Markus Armbruster
6df658f55c usb-ccid: Plug memory leak on qdev exit()
ccid_initfn() allocates CCIDBus dynamically, but there is no exit
callback to free it.

Fix by getting rid of the allocation.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
2011-06-14 09:34:35 -05:00
Michael Tokarev
35f7546206 print meaningful error message in case of --disable-vhost-net
When qemu gets compiled without support of vhost-net, any attempt
to use it fails with a very clear error message:

 qemu-system-x86_64: -netdev ...,vhost=on: vhost-net requested but could not be initialized

there's absolutely no reason given _why_ it coult not be
initialized, and even strace'ing the process in question
does not reveal any errors.  So print a message telling
what's going on.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-06-14 16:48:04 +03:00
Michael S. Tsirkin
b91cb44215 virtio: compat event idx support
Disable event index for compat machine types.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-06-14 16:48:00 +03:00
Gerd Hoffmann
94cc916a8c usb-uhci: fix expire time initialization.
expire_time must be initialited when the guest activates the
usb scheduler, not at device creation time.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:50 +02:00
Peter Maydell
9bba1eb180 hw/usb-ohci.c: Implement remote wakeup
Implement the wakeup callback in the OHCI USBPortOps, so that when
a downstream device wakes up it correctly causes the OHCI controller
to come out of suspend.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:50 +02:00
Peter Maydell
4b0315d7ed hw/usb-ohci.c: Ignore writes to HcPeriodCurrentED register
HcPeriodCurrentED is read-only, but Linux writes to it anyway; silently
ignore this rather than printing a warning message.

(Specifically, drivers/usb/host/ohci-hub.c:ohci_rh_resume() writes a
0, in at least kernels 2.6.25 through 2.6.39.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:50 +02:00
Brad Hards
4001f22ffd usb: Use defines for serial bus release number register for EHCI
Signed-off-by: Brad Hards <bradh@frogmouth.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:50 +02:00
Brad Hards
e59d33a734 usb: Use defines for serial bus release number register for UHCI
Signed-off-by: Brad Hards <bradh@frogmouth.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:50 +02:00
Brad Hards
8e257816b0 usb: Add defines for USB Serial Bus Release Number register
Signed-off-by: Brad Hards <bradh@frogmouth.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:50 +02:00
Hans de Goede
290a5c60a3 usb-bus: Don't detach non attached devices on device exit
This causes an "Error: tried to detach unattached usb device " to be printed,
this can happen when deleting ie a usb host qdev, which did not
get attached (because a device matching the filter never got plugged in).

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:49 +02:00
Hans de Goede
290d26d2e7 usb-bus: Add knowledge of USB_SPEED_SUPER to usb_speed helper
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:49 +02:00
Gerd Hoffmann
025b168ca6 usb-ehci: split trace calls to handle arg count limits
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:49 +02:00
Gerd Hoffmann
e654887f38 usb-ehci: itd handling fixes.
This patch fixes a bunch of issues in the itd descriptor handling.
Most important fix is to handle transfers which cross page borders
correctly by looking up the address of the next page.  Luckily the
linux uses physically contigous memory so the data used to hits the
correct location even with this bug instead of corrupting guest
memory.  Also the transfer length updates for outgoing transfers wasn't
correct.

While being at it DPRINTFs have been replaced by tracepoints.

The isoch_pause logic has been disabled.  Not clear to me which propose
this serves and I think it is incorrect too as we just skip processing
itds.  Even when no xfer happens we have to clear the active bit.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:49 +02:00
Kevin O'Connor
69bf405b50 The USB tablet should not claim boot protocol support.
The USB tablet advertises that it supports the "boot" protocol.
However, its reports aren't "boot" protocol compatible.  So, it
shouldn't claim that.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:49 +02:00
Kevin O'Connor
46115ac4c4 Fix USB mouse Set_Protocol behavior
The QEMU USB mouse claims to support the "boot" protocol
(bInterfaceSubClass is 1).  However, the mouse rejects the
Set_Protocol command.

The qemu mouse does support the "boot" protocol specification, so a
simple fix is to enable the Set_Protocol request.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:49 +02:00
Gerd Hoffmann
d05393071a usb-ehci: drop EXECUTING checks.
The state machine doesn't stop in EXECUTING state any more when async
packets are in flight, so the checks are not needed any more and can
be dropped.

Also kick out the check for the frame timer.  As we don't stop & sleep
any more on async packets this is obsolete.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:49 +02:00
Gerd Hoffmann
07771f6fce usb: cancel async packets on unplug
This patch adds USBBusOps struct with (for now) only a single callback
which is called when a device is about to be destroyed.  The USB Host
adapters are implementing this callback and use it to cancel any async
requests which might be in flight before the device actually goes away.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:49 +02:00
Hans de Goede
8e4faf3de9 ehci: fix a number of unused-but-set-variable warnings (new with gcc-4.6)
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:48 +02:00
Gerd Hoffmann
d2bd525fbb usb-ehci: fix error handling.
Set the correct bits for nodev, stall and babble errors.
Raise errint irq.  Fix state transition from WRITEBACK
to the next state.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:48 +02:00
Gerd Hoffmann
ba7cb5a86a usb-ehci: fix offset writeback in ehci_buffer_rw
Two bugs at once:

First the mask is backwards, so the it used to keeps the offset and
clears the page address, which is not what we need when we update the
offset.

Second the offset calculation is wrong in case head isn't page aligned.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:48 +02:00
Gerd Hoffmann
8ac6d699c4 usb-ehci: multiqueue support
This patch adds support for keeping multiple queues going at the same
time.  One slow device will not affect other devices any more.

The patch adds code to manage EHCIQueue structs.  It also does a number
of changes to the state machine:

 * The state machine will never ever stop in EXECUTING any more.
   Instead it will continue with the next queue (aka HORIZONTALQH) when
   the usb device returns USB_RET_ASYNC.
 * The state machine will stop processing when it figures it walks in
   circles (easy to figure now that we have a EHCIQueue struct for each
   QH we've processed).  The bailout logic should not be needed any
   more.  For now it is still in, but will assert() in case it triggers.
 * The state machine will just skip queues with a async USBPacket in
   flight.
 * The state machine will resume processing as soon as the async
   USBPacket is finished.

The patch also takes care to flush the QH struct back to guest memory
when needed, so we don't get stale data when (re-)loading it from guest
memory in FETCHQH state.

It also makes the writeback code to not touch the first three dwords of
the QH struct as the EHCI must not write them.  This actually fixes a
bug where QH chaining changes (next ptr) by the linux ehci driver where
overwritten by the emulated EHCI.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:56:40 +02:00
Gerd Hoffmann
0122f47279 usb-ehci: add queue data struct
Add EHCIQueue struct, move the fields needed to track the queue state
into that struct.  Pass the new struct instead of ehci state down to
functions which handle the queue state.  Lot of variable references have
changed due to that without an actual functional change.

Replace fetch_addr with two variables, one for async and one for
periodic schedule.  Add functions to get and set the fetch address.

Use EHCIQueue->usb_status (old name: EHCIState->exec_status) directly in
ehci_execute_complete instead of passing around the status using a
parameters and the return value.

ehci_state_fetchqh returns a EHCIQueue struct now.

No change in behavior.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:36:29 +02:00
Gerd Hoffmann
f2c88dc10e usb-ehci: trace buffer copy
Add a trace point for buffer copies and drop the DPRINTF's.

No change in behavior.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:36:29 +02:00
Gerd Hoffmann
c4f8e21165 usb-ehci: improve mmio tracing
Add a separate tracepoint to log how register values change in response
to a mmio write.  Especially useful for registers which have read-only
or clear-on-write bits in them.

No change in behavior.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:36:28 +02:00
Gerd Hoffmann
dcbd0b5c0e usb-ehci: trace port state
Trace usb port operations (attach, detach, reset),
drop a few obsolete DPRINTF's.

No change in behavior.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:36:28 +02:00
Gerd Hoffmann
26d53979db usb-ehci: trace state machine changes
Add functions to get and set the current state of the state machine,
add tracepoints there to trace state transitions.  Add support for
traceing the queue heads and transfer descriptors as we look at them.

Drop a few DPRINTFs and all DPRINTF_ST lines, they are obsolete now.

No change in behavior.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:36:28 +02:00
Gerd Hoffmann
439a97ccab usb-ehci: trace mmio and usbsts
This patch starts adding trace support to ehci.  It traces
updates of the status register (USBSTS), mmio access and
controller reset.

It also adds functions to set and clear status register bits
and puts them in use everywhere.

Some DPRINTF's are dropped in favor of the new tracepoints.

No change in behavior.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-06-14 12:36:28 +02:00
Michael S. Tsirkin
bcbabae8ff virtio: event index support
Add support for event_idx feature, and utilize it to
reduce the number of interrupts and exits for the guest.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-06-12 16:36:53 +03:00
Jan Kiszka
01731cfb39 msix: Use replace local defines with pci_regs versions
This also cleans up an open-coded 64-bit message address readout.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-06-12 10:33:39 +03:00
Jan Kiszka
81486b55f4 pci: Update pci_regs header
Pulls in latest version from kernel 3.0-rc2.

Some changes around AER now require local defines as QEMU accesses the
error source identification register via sub-words.

CC: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-06-12 10:33:39 +03:00
Jan Kiszka
4dad7f1ec5 msi: Fix copy&paste mistake in msi_uninit
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-06-12 10:33:38 +03:00
Jason Wang
d3674c5754 virtio: correctly initialize vm_running
Current vm_running was not explicitly initialized and its value was changed by
vm state notifier, this may confuse the virtio device being hotplugged such as
virtio-net with vhost backend as it may think the vm was not running. Solve this
by initialize this value explicitly in virtio_common_init().

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-06-12 10:33:38 +03:00
Stefan Hajnoczi
7157e2e23e virtio: guard against negative vq notifies
The virtio_queue_notify() function checks that the virtqueue number is
less than the maximum number of virtqueues.  A signed comparison is used
but the virtqueue number could be negative if a buggy or malicious guest
is run.  This results in memory accesses outside of the virtqueue array.

It is risky doing input validation in common code instead of at the
guest<->host boundary.  Note that virtio_queue_set_addr(),
virtio_queue_get_addr(), virtio_queue_get_num(), and many other virtio
functions do *not* validate the virtqueue number argument.

Instead of fixing the comparison in virtio_queue_notify(), move the
comparison to the virtio bindings (just like VIRTIO_PCI_QUEUE_SEL) where
we have a uint32_t value and can avoid ever calling into common virtio
code if the virtqueue number is invalid.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-06-12 10:33:38 +03:00
Isaku Yamahata
e75ccf2c03 virtio-pci.c: convert to PCIDEviceInfo to initialize ids
use PCIDeviceInfo to initialize ids.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-06-12 10:33:38 +03:00
Isaku Yamahata
5844997a28 hw/xio3130_upstream.c: convert to PCIDeviceInfo to initialize ids
use PCIDeviceInfo to initialize ids.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-06-12 10:33:38 +03:00
Isaku Yamahata
3ec39b2d20 hw/xio3130_downstream.c: convert to PCIDeviceInfo to initialize ids
use PCIDeviceInfo to initialize ids.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-06-12 10:33:38 +03:00
Isaku Yamahata
24b856ca63 hw/wdt_i6300esb.c: convert to PCIDeviceInfo to initialize ids
use PCIDeviceInfo to initialize ids.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-06-12 10:33:38 +03:00
Isaku Yamahata
1cf0d2b835 hw/vt82c686.c: convert to PCIDeviceInfo to initialize ids
use PCIDeviceInfo to initialize ids.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-06-12 10:33:37 +03:00
Isaku Yamahata
3290277283 hw/vga-pci.c: convert to PCIDeviceInfo to initialize ids
use PCIDeviceInfo to initialize ids.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-06-12 10:33:37 +03:00
Isaku Yamahata
56fe6408d7 hw/versatile_pci.c: convert to PCIDeviceInfo to initialize ids
use PCIDeviceInfo to initialize ids.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-06-12 10:33:37 +03:00
Isaku Yamahata
a8eae58556 hw/usb-ohci.c: convert to PCIDeviceInfo to initialize ids
use PCIDeviceInfo to initialize ids.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-06-12 10:33:37 +03:00
Isaku Yamahata
d7b61ecc61 hw/unin_pci.c: convert to PCIDeviceInfo to initialize ids
use PCIDeviceInfo to initialize ids.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-06-12 10:33:37 +03:00
Isaku Yamahata
e8b36ba92e hw/sun4u.c: convert to PCIDeviceInfo to initialize ids
use PCIDeviceInfo to initialize ids.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-06-12 10:33:36 +03:00
Isaku Yamahata
ae2ebad733 hw/sh_pci.c: convert to PCIDeviceInfo to initialize ids
use PCIDeviceInfo to initialize ids.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-06-12 10:33:36 +03:00
Isaku Yamahata
7cba16a748 hw/rtl8139.c: convert to PCIDeviceInfo to initialize ids
use PCIDeviceInfo to initialize ids.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-06-12 10:33:36 +03:00
Isaku Yamahata
96c05abc90 hw/qxl.c: convert to PCIDeviceInfo to initialize ids
use PCIDeviceInfo to initialize ids.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-06-12 10:33:36 +03:00
Isaku Yamahata
3a9d85491e hw/piix_pci.c: convert to PCIDeviceInfo to initialize ids
use PCIDeviceInfo to initialize ids.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-06-12 10:33:36 +03:00
Isaku Yamahata
146beee5d9 hw/piix4.c: convert to PCIDeviceInfo to initialize ids
use PCIDeviceInfo to initialize ids.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-06-12 10:33:36 +03:00
Isaku Yamahata
d7dccd1168 hw/pcnet-pci.c: convert to PCIDeviceInfo to initialize ids
use PCIDeviceInfo to initialize ids.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-06-12 10:33:36 +03:00
Isaku Yamahata
18f1c729b8 hw/ne2000.c: convert to PCIDeviceInfo to initialize ids
use PCIDeviceInfo to initialize ids.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-06-12 10:33:35 +03:00