Currently the number of registers exposed to GDB is written as magic
numbers in code. Derive the number of registers GDB actually see from
XML files to replace the magic numbers in code later.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231025093128.33116-2-akihiko.odaki@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231106185112.2755262-9-alex.bennee@linaro.org>
There are a number of things that are broken on the test currently so
lets fix that up:
- replace retired Debian kernel for tuxrun_baseline one
- remove "detected repeat instructions test" since ea185a55
- log total counted instructions/memory accesses
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231106185112.2755262-8-alex.bennee@linaro.org>
We already do a couple of "info registers" for specific tests but this
is a more comprehensive multiarch test. It also has some output
helpful for debugging the gdbstub by showing which XML features are
advertised and what the underlying register numbers are.
My initial motivation was to see if there are any duplicate register
names exposed via the gdbstub while I was reviewing the proposed
register interface for TCG plugins.
Mismatches between the xml and remote-desc are reported for debugging
but do not fail the test.
We also skip the tests for the following arches for now until we can
investigate and fix any issues:
- s390x (fails to read v0l->v15l, not seen in remote-registers)
- ppc64 (fails to read vs0h->vs31h, not seen in remote-registers)
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Cc: Luis Machado <luis.machado@linaro.org>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: qemu-s390x@nongnu.org
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Daniel Henrique Barboza <danielhb413@gmail.com>
Cc: qemu-ppc@nongnu.org
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231106185112.2755262-7-alex.bennee@linaro.org>
This is just a constant alias register with the same value as the
"other" MIDR so it serves no purpose being presented to gdbstub.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20231106185112.2755262-6-alex.bennee@linaro.org>
This avoids two duplicates being presented to gdbstub. As the
registers are RAZ anyway it is unlikely their value would be of use to
someone using gdbstub anyway.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231106185112.2755262-5-alex.bennee@linaro.org>
We also mark it ARM_CP_NO_GDB so we avoid duplicate PAR's in the
system register XML we send to gdb.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231107105145.2916124-1-alex.bennee@linaro.org>
loongarch64-linux-user has references to XML files so include them.
Fixes: d32688ecdb ("default-configs: Add loongarch linux-user support")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20231030054834.39145-6-akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[AJB: remove base32 from list]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231106185112.2755262-2-alex.bennee@linaro.org>
This queue, the last one before the 8.2 feature freeze, has miscellanous
changes that includes new PowerNV features and the new AmigaONE XE
board.
-----BEGIN PGP SIGNATURE-----
iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZUqiORYcZGFuaWVsaGI0
MTNAZ21haWwuY29tAAoJEDzZypbeAzFkBSUA/2qm8CyrRqY5+tsjtWQqZmPZ3L1F
CgnXFNqtY2tzbTe5AQCi6FeQBEmXbZYVfryZyA+CQ4DUERc+18pe6hV3bBR9Cg==
=cnHS
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20231107' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2023-11-07:
This queue, the last one before the 8.2 feature freeze, has miscellanous
changes that includes new PowerNV features and the new AmigaONE XE
board.
# -----BEGIN PGP SIGNATURE-----
#
# iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZUqiORYcZGFuaWVsaGI0
# MTNAZ21haWwuY29tAAoJEDzZypbeAzFkBSUA/2qm8CyrRqY5+tsjtWQqZmPZ3L1F
# CgnXFNqtY2tzbTe5AQCi6FeQBEmXbZYVfryZyA+CQ4DUERc+18pe6hV3bBR9Cg==
# =cnHS
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 08 Nov 2023 04:46:49 HKT
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: issuer "danielhb413@gmail.com"
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20231107' of https://gitlab.com/danielhb/qemu:
ppc: qtest already exports qtest_rtas_call()
hw/pci-host: Update PHB5 XSCOM registers
ppc/pnv: Fix number of I2C engines and ports for power9/10
ppc/pnv: Connect PNV I2C controller to powernv10
ppc/pnv: Connect I2C controller model to powernv9 chip
ppc/pnv: Add an I2C controller model
tests/avocado: Add test for amigaone board
hw/ppc: Add emulation of AmigaOne XE board
hw/pci-host: Add emulation of Mai Logic Articia S
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* Fix condition code problem in the CLC and LAALG instruction
* Fix ordering of the new s390x topology list entries
* Add some more files to the MAINTAINERS file
* Allow newer versions of Tesseract in the m68k nextcube test
-----BEGIN PGP SIGNATURE-----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=y+cC
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-11-07' of https://gitlab.com/thuth/qemu into staging
* Fix s390x CPU reconfiguration information in the SCLP facility map
* Fix condition code problem in the CLC and LAALG instruction
* Fix ordering of the new s390x topology list entries
* Add some more files to the MAINTAINERS file
* Allow newer versions of Tesseract in the m68k nextcube test
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmVKgksRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbWIHg//TM3JOpsMEqHKlUKqOJH02mFQrK6H7LG0
# BC56FG7T+/mpYs1NTG92t8nCK03C2ZCweQWD7ZulRJAjPhZv+TF5bJEForivU7+k
# PKEshz9xKCWn2YGyNnf2LA06J1JkF215+KlReOoxwSgj1cPlHfBLQ0DtxmpJJZ1G
# h5p4d26BbSlwR58HrFWTlhgJMPenl59BETUGIK1FklBxunmZeeijddfniAhOT44y
# i0u9/H9KCg3tkwBROUy+42QV+ef32kz/yvi5RmYQI5W7PixO4sxH6MYduOjshsu9
# wK70f8EOwiZV6lFxqmbV7vxFeNnp5IuaVU7PMBoAkwZqLw99mSFy1+1BabCuL5b+
# 3iUTiD4UW48MYwE2Ua6Lit4kpfjhwcp/UYz6pIk6TCBQX6LfzO+nj+rod0GdIpyZ
# 4Lwm7jBtpTlYkGrsMvpA/qcidOtqPA1lmBTNlY1hFodQF6KWtyObn0w5AM80xeeU
# /mGxQDz97Bpz7LKZvhu+k38jaWvnJFnl3jF1zet88CYL9YL+YI/k1KjhFafCXb0V
# 38Xpt5JTWxyLSh2B3gx0OpokX5bftvW9GlLix0HqL7c23uYwR2Bq+Rd6I8SAlk4C
# uJq6gqP8IFBFHfgbmyqf/fyd/eHxm7J1voIdy9PZyxZ1JYT9A7yu56qV6SJYwCpr
# aARwui/Dm4o=
# =y+cC
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 08 Nov 2023 02:30:35 HKT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-11-07' of https://gitlab.com/thuth/qemu:
target/s390x/cpu topology: Fix ordering and creation of TLEs
tests/tcg/s390x: Test ADD LOGICAL WITH CARRY
tests/tcg/s390x: Test LAALG with negative cc_src
target/s390x: Fix LAALG not updating cc_src
tests/tcg/s390x: Test CLC with inaccessible second operand
target/s390x: Fix CLC corrupting cc_src
target/s390x/cpu_models: Use 'first_cpu' in s390_get_feat_block()
s390/sclp: fix SCLP facility map
tests/avocado: Allow newer versions of tesseract in the nextcube test
MAINTAINERS: Add artist.c to the hppa machine section
MAINTAINERS: Add the virtio-gpu documentation to the corresponding section
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Having two functions with the same name is a bad idea. As spapr only
uses the function locally, made it static.
When you compile with clang, you get this compilation error:
/usr/bin/ld: tests/qtest/libqos/libqos.fa.p/.._libqtest.c.o: in function `qtest_rtas_call':
/scratch/qemu/clang/full/all/../../../../../mnt/code/qemu/full/tests/qtest/libqtest.c:1195: multiple definition of `qtest_rtas_call'; libqemu-ppc64-softmmu.fa.p/hw_ppc_spapr_rtas.c.o:/scratch/qemu/clang/full/all/../../../../../mnt/code/qemu/full/hw/ppc/spapr_rtas.c:536: first defined here
clang-16: error: linker command failed with exit code 1 (use -v to see invocation)
ninja: build stopped: subcommand failed.
make: *** [Makefile:162: run-ninja] Error 1
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20231030163834.4638-1-quintela@redhat.com>
[dhb: remove 'spapr_rtas.h' include from spapr_rtas.c]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Add new XSCOM registers introduced in PHB5.
Apply bit-masks within xscom-write methods.
Bit-masks specified using PPC_BITMASK macro.
Signed-off-by: Saif Abrar <saif.abrar@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-ID: <20231016175948.10869-1-saif.abrar@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Power9 is supposed to have 4 PIB-connected I2C engines with the
following number of ports on each engine:
0: 2
1: 13
2: 2
3: 2
Power10 also has 4 engines but has the following number of ports
on each engine:
0: 14
1: 14
2: 2
3: 16
Current code assumes that they all have the same (maximum) number.
This can be a problem if software expects to see a certain number
of ports present (Power Hypervisor seems to care).
Fixed this by adding separate tables for power9 and power10 that
map the I2C controller number to the number of I2C buses that should
be attached for that engine.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Message-ID: <20231025152714.956664-1-milesg@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Wires up four I2C controller instances to the powernv10 chip
XSCOM address space.
Each controller instance is wired up to two I2C buses of
its own. No other I2C devices are connected to the buses
at this time.
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20231017221434.810363-1-milesg@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Wires up three I2C controller instances to the powernv9 chip
XSCOM address space.
Each controller instance is wired up to a single I2C bus of
its own. No other I2C devices are connected to the buses
at this time.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[milesg: Split wiring from addition of model itself]
[milesg: Added new commit message]
[milesg: Moved hardcoded attributes into PnvChipClass]
[milesg: Removed TODO comment for I2C]
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-ID: <20231016222013.3739530-3-milesg@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The more recent IBM power processors have an embedded I2C
controller that is accessible by software via the XSCOM
address space.
Each instance of the I2C controller is capable of controlling
multiple I2C buses (one at a time). Prior to beginning a
transaction on an I2C bus, the bus must be selected by writing
the port number associated with the bus into the PORT_NUM
field of the MODE register. Once an I2C bus is selected,
the status of the bus can be determined by reading the
Status and Extended Status registers.
I2C bus transactions can be started by writing a command to
the Command register and reading/writing data from/to the
FIFO register.
Not supported :
. 10 bit I2C addresses
. Multimaster
. Slave
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[milesg: Split wiring to powernv9 into its own commit]
[milesg: Added more detail to commit message]
[milesg: Added SPDX Licensed Identifier to new files]
[milesg: updated copyright dates]
[milesg: Added use of g_autofree]
[milesg: Added NULL check after pnv_i2c_get_bus]
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-ID: <20231016222013.3739530-2-milesg@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Add an avocado test for the amigaone board that tests it with the
firmware.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-ID: <b1a0246840fcff1fe6bbd8685e2474a9231b34c5.1698406922.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The AmigaOne is a rebranded MAI Teron board that uses U-Boot firmware
with patches to support AmigaOS and is very similar to pegasos2 so can
be easily emulated sharing most code with pegasos2. The reason to
emulate it is that AmigaOS comes in different versions for AmigaOne
and PegasosII which only have drivers for one machine and firmware so
these only run on the specific machine. Adding this board allows
another AmigaOS version to be used reusing already existing peagasos2
emulation. (The AmigaOne was the first of these boards so likely most
widespread which then inspired Pegasos that was later replaced with
PegasosII due to problems with Articia S, so these have a lot of
similarity. Pegasos mainly ran MorphOS while the PegasosII version of
AmigaOS was added later and therefore less common than the AmigaOne
version.)
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-ID: <804935e7a5921548d630576159ae2c758fe6e275.1699382232.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In case of horizontal polarization entitlement has no effect on
ordering.
Moreover, since the comparison is used to insert CPUs at the correct
position in the TLE list, this affects the creation of TLEs and now
correctly collapses horizontally polarized CPUs into one TLE.
Fixes: f4f54b582f ("target/s390x/cpu topology: handle STSI(15) and build the SYSIB")
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Message-ID: <20231027163637.3060537-1-nsg@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a test that tries different combinations of ADD LOGICAL WITH
CARRY instructions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20231106093605.1349201-6-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20231106093605.1349201-5-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
LAALG uses op_laa() and wout_addu64(). The latter expects cc_src to be
set, but the former does not do it. This can lead to assertion failures
if something sets cc_src to neither 0 nor 1 before.
Fix by introducing op_laa_addu64(), which sets cc_src, and using it for
LAALG.
Fixes: 4dba4d6fef ("target/s390x: Use atomic operations for LOAD AND OP")
Cc: qemu-stable@nongnu.org
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20231106093605.1349201-4-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a small test to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20231106093605.1349201-3-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
CLC updates cc_src before accessing the second operand; if the latter
is inaccessible, the former ends up containing a bogus value.
Fix by reading cc_src into a temporary first.
Fixes: 4f7403d52b ("target-s390: Convert CLC")
Closes: https://gitlab.com/qemu-project/qemu/-/issues/1865
Cc: qemu-stable@nongnu.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-ID: <20231106093605.1349201-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We already have a global 'first_cpu' variable storing a pointer
to the first CPU, no need to use a static one.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231030093150.65297-1-philmd@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Qemu's SCLP implementation incorrectly reports that it supports CPU
reconfiguration. If a guest issues a CPU reconfiguration request it
is rejected as invalid command.
Fix the SCLP_HAS_CPU_INFO mask, and remove the unused
SCLP_CMDW_CONFIGURE_CPU and SCLP_CMDW_DECONFIGURE_CPU defines.
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Message-ID: <20231024100703.929679-1-hca@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Current Linux distros ship version 5 of the tesseract OCR software,
so the nextcube screen test is ignored there. Let's make the check
more flexible to allow newer versions, too, and remove the old v3
test since most Linux distros don't ship this version anymore.
Message-ID: <20231101204323.35533-1-huth@tuxfamily.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
The artist graphics adapter is only used by the hppa machine, so
let's add this file to the corresponding section.
Message-ID: <20231107103044.15089-1-thuth@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When run this script, there's the error:
python3 scripts/cpu-x86-uarch-abi.py /tmp/qmp
Traceback (most recent call last):
File "/path-to-qemu/qemu/scripts/cpu-x86-uarch-abi.py", line 96, in <module>
cpu = shell.cmd("query-cpu-model-expansion",
TypeError: QEMUMonitorProtocol.cmd() takes 2 positional arguments but 3 were given
Commit 7f521b023b ("scripts/cpu-x86-uarch-abi.py: use .command()
instead of .cmd()") converts the the original .cmd() to .command()
(which was later renamed to "cmd" to replace the original one).
But the new .cmd() only accepts typing.Mapping as the parameter instead
of typing.Dict (see _qmp.execute()).
Change the paremeters of "query-cpu-model-expansion" to typing.Mapping
format to fix this error.
Fixes: 7f521b023b ("scripts/cpu-x86-uarch-abi.py: use .command() instead of .cmd()")
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The Articia S is a generic chipset supporting several different CPUs
that were among others used on some PPC boards. This is a minimal
emulation of the parts needed for emulating the AmigaOne board.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-ID: <83822787431701cf4d460298d3e3845f362e5da1.1698406922.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Print a debug message as is done for other unsupported audio formats
to give the user the chance to understand their mistake.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
All callers of qio_net_listener_set_name() already add some sort of
"listen" or "listener" suffix.
For intance, we currently have "migration-socket-listener-listen" and
"vnc-listen-listen" as ioc names.
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When qcrypto_builtin_rsa_public_key_parse() is about to fail, but no
error has been set, it makes one up. Actually, there's just one way
to fail without setting an error. Set it there instead.
Same for qcrypto_builtin_rsa_private_key_parse().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Previously, when using the SDL2 UI on MacOS, the title bar uses incorrect
key names (such as Ctrl and Alt instead of the standard MacOS key symbols
like ⌃ and ⌥). This commit changes sdl_update_caption in ui/sdl2.c to
use the correct symbols when compiling for MacOS (CONFIG_DARWIN is
defined).
Unfortunately, standard Mac keyboards do not include a "Right-Ctrl" key,
so in the case that the SDL grab mode is set to HOT_KEY_MOD_RCTRL, the
default text is still used.
Signed-off-by: Adrian Wowk <dev@adrianwowk.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231030024119.28342-1-dev@adrianwowk.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
contrib/systemd/qemu-guest-agent.service, tests/data/test-qga-config
and tests/data/test-qga-os-release belong to the guest agent, so make
sure that these files are covered here, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-ID: <20231107101811.14189-1-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These machines are the only user of the mx_pic code, so the
header (which is currently "unmaintained" according to the
MAINTAINERS file) should be added to this section.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231107102104.14342-1-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Effective immediately, the libvirt project has moved its list off
libvir-list@redhat.com, to devel@lists.libvirt.org
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20231027095643.2842382-1-berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add can.rst to the corresponding section in MAINTAINERS, so that
the maintainers get CC:-ed on corresponding patches.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Vikram Garhwal <vikram.garhwal@amd.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Message-ID: <20231027060931.242491-1-thuth@redhat.com>
[PMD: Fixed typo in subject]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
tmu012.h is the header that belongs to hw/timer/sh_timer.c, so we
should list it in the same section as sh_timer.c.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-ID: <20231026080011.156325-1-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The linux pmbus driver scans all possible pages and does not reset the
current page after the scan, making all future page reads fail as out of range
on devices with a single page.
This change resets out of range pages immediately on write.
Also added a qtest for simultaneous writes to all pages.
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Signed-off-by: Titus Rwantare <titusr@google.com>
Message-ID: <20231023-staging-pmbus-v3-v4-8-07a8cb7cd20a@google.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The probing process of the generic pmbus driver generates
faults to determine if functions are available. These faults
were not always cleared resulting in probe failures.
Reviewed-by: Patrick Venture <venture@google.com>
Signed-off-by: Titus Rwantare <titusr@google.com>
Message-ID: <20231023-staging-pmbus-v3-v4-7-07a8cb7cd20a@google.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The ADM1266 can have string fields written by the driver, so
it's worth specifically testing.
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Titus Rwantare <titusr@google.com>
[PMD: Cover file in MAINTAINERS]
Message-ID: <20231023-staging-pmbus-v3-v4-6-07a8cb7cd20a@google.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The ADM1266 is a cascadable super sequencer with margin control and
fault recording.
This commit adds basic support for its PMBus commands and models
the identification registers that can be modified in a firmware
update.
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Titus Rwantare <titusr@google.com>
[PMD: Cover file in MAINTAINERS]
Message-ID: <20231023-staging-pmbus-v3-v4-5-07a8cb7cd20a@google.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
VCAP is a register for devices with energy storage capacitors.
Reviewed-by: Benjamin Streb <bstreb@google.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Titus Rwantare <titusr@google.com>
Message-ID: <20231023-staging-pmbus-v3-v4-4-07a8cb7cd20a@google.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
PMBus devices may integrate fans whose operation is configurable
over PMBus. This commit allows the driver to read and write the
fan control registers but does not model the operation of fans.
Reviewed-by: Stephen Longfield <slongfield@google.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Titus Rwantare <titusr@google.com>
Message-ID: <20231023-staging-pmbus-v3-v4-3-07a8cb7cd20a@google.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
