Dynamically enable Atomic Ops completer support around realize/exit of
vfio-pci devices reporting host support for these accesses and adhering
to a minimal configuration standard. While the Atomic Ops completer
bits in the root port device capabilities2 register are read-only, the
PCIe spec does allow RO bits to change to reflect hardware state. We
take advantage of that here around the realize and exit functions of
the vfio-pci device.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Robin Voetter <robin@streamhpc.com>
Tested-by: Robin Voetter <robin@streamhpc.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
vfio_realize() has the following flow:
1. vfio_bars_prepare() -- sets VFIOBAR->size.
2. msix_early_setup().
3. vfio_bars_register() -- allocates VFIOBAR->mr.
After vfio_bars_prepare() is called msix_early_setup() can fail. If it
does fail, vfio_bars_register() is never called and VFIOBAR->mr is not
allocated.
In this case, vfio_bars_finalize() is called as part of the error flow
to free the bars' resources. However, vfio_bars_finalize() calls
object_unparent() for VFIOBAR->mr after checking only VFIOBAR->size, and
thus we get a null pointer dereference.
Fix it by checking VFIOBAR->mr in vfio_bars_finalize().
Fixes: 89d5202edc ("vfio/pci: Allow relocating MSI-X MMIO")
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Make vfio_migration_realize() adhere to the convention of other realize()
callbacks(like qdev_realize) by returning bool instead of int.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Suggested-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Property enable_migration supports [on/off/auto].
In ON mode, error pointer is passed to errp and logged.
In OFF mode, we doesn't need to log "Migration disabled" as it's intentional.
In AUTO mode, we should only ever see errors or warnings if the device
supports migration and an error or incompatibility occurs while further
probing or configuring it. Lack of support for migration shoundn't
generate an error or warning.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
When vfio_realize() succeeds, hot unplug will call vfio_exitfn()
to free resources allocated in vfio_realize(); when vfio_realize()
fails, vfio_exitfn() is never called and we need to free resources
in vfio_realize().
In the case that vfio_migration_realize() fails,
e.g: with -only-migratable & enable-migration=off, we see below:
(qemu) device_add vfio-pci,host=81:11.1,id=vfio1,bus=root1,enable-migration=off
0000:81:11.1: Migration disabled
Error: disallowing migration blocker (--only-migratable) for: 0000:81:11.1: Migration is disabled for VFIO device
If we hotplug again we should see same log as above, but we see:
(qemu) device_add vfio-pci,host=81:11.1,id=vfio1,bus=root1,enable-migration=off
Error: vfio 0000:81:11.1: device is already attached
That's because some references to VFIO device isn't released.
For resources allocated in vfio_migration_realize(), free them by
jumping to out_deinit path with calling a new function
vfio_migration_deinit(). For resources allocated in vfio_realize(),
free them by jumping to de-register path in vfio_realize().
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Fixes: a22651053b ("vfio: Make vfio-pci device migration capable")
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Contrary to multiple device blocker which needs to consider already-attached
devices to unblock/block dynamically, the vIOMMU migration blocker is a device
specific config. Meaning it only needs to know whether the device is bypassing
or not the vIOMMU (via machine property, or per pxb-pcie::bypass_iommu), and
does not need the state of currently present devices. For this reason, the
vIOMMU global migration blocker can be consolidated into the per-device
migration blocker, allowing us to remove some unnecessary code.
This change also makes vfio_mig_active() more accurate as it doesn't check for
global blocker.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
When vfio realize fails, INTx isn't disabled if it has been enabled.
This may confuse host side with unhandled interrupt report.
Fixes: c5478fea27 ("vfio/pci: Respond to KVM irqchip change notifier")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Coverity reports a tained scalar when traversing the capabilities
chain (CID 1516589). In practice I've never seen a device with a
chain so broken as to cause an issue, but it's also pretty easy to
sanitize.
Fixes: f6b30c1984 ("hw/vfio/pci-quirks: Support alternate offset for GPUDirect Cliques")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
When vfio_realize fails, the mmap_timer used for INTx optimization
isn't freed. As this timer isn't activated yet, the potential impact
is just a piece of leaked memory.
Fixes: ea486926b0 ("vfio-pci: Update slow path INTx algorithm timer related")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The kvm irqchip notifier is only registered if the device supports
INTx, however it's unconditionally removed in vfio realize error
path. If the assigned device does not support INTx, this will cause
QEMU to crash when vfio realize fails. Change it to conditionally
remove the notifier only if the notify hook is setup.
Before fix:
(qemu) device_add vfio-pci,host=81:11.1,id=vfio1,bus=root1,xres=1
Connection closed by foreign host.
After fix:
(qemu) device_add vfio-pci,host=81:11.1,id=vfio1,bus=root1,xres=1
Error: vfio 0000:81:11.1: xres and yres properties require display=on
(qemu)
Fixes: c5478fea27 ("vfio/pci: Respond to KVM irqchip change notifier")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The major parts of VFIO migration are supported today in QEMU. This
includes basic VFIO migration, device dirty page tracking and precopy
support.
Thus, at this point in time, it seems appropriate to make VFIO migration
non-experimental: remove the x prefix from enable_migration property,
change it to ON_OFF_AUTO and let the default value be AUTO.
In addition, make the following adjustments:
1. When enable_migration is ON and migration is not supported, fail VFIO
device realization.
2. When enable_migration is AUTO (i.e., not explicitly enabled), require
device dirty tracking support. This is because device dirty tracking
is currently the only method to do dirty page tracking, which is
essential for migrating in a reasonable downtime. Setting
enable_migration to ON will not require device dirty tracking.
3. Make migration error and blocker messages more elaborate.
4. Remove error prints in vfio_migration_query_flags().
5. Rename trace_vfio_migration_probe() to
trace_vfio_migration_realize().
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Currently, VFIO bytes_transferred is not reset properly:
1. bytes_transferred is not reset after a VM snapshot (so a migration
following a snapshot will report incorrect value).
2. bytes_transferred is a single counter for all VFIO devices, however
upon migration failure it is reset multiple times, by each VFIO
device.
Fix it by introducing a new function vfio_reset_bytes_transferred() and
calling it during migration and snapshot start.
Remove existing bytes_transferred reset in VFIO migration state
notifier, which is not needed anymore.
Fixes: 3710586caa ("qapi: Add VFIO devices migration stats in Migration stats")
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
When vfio_enable_vectors() returns with less than requested nr_vectors
we retry with what kernel reported back. But the retry path doesn't
call vfio_prepare_kvm_msi_virq_batch() and this results in,
qemu-system-aarch64: vfio: Error: Failed to enable 4 MSI vectors, retry with 1
qemu-system-aarch64: ../hw/vfio/pci.c:602: vfio_commit_kvm_msi_virq_batch: Assertion `vdev->defer_kvm_irq_routing' failed
Fixes: dc580d51f7 ("vfio: defer to commit kvm irq routing when enable msi/msix")
Reviewed-by: Longpeng <longpeng2@huawei.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
NVIDIA Turing and newer GPUs implement the MSI-X capability at the offset
previously reserved for use by hypervisors to implement the GPUDirect
Cliques capability. A revised specification provides an alternate
location. Add a config space walk to the quirk to check for conflicts,
allowing us to fall back to the new location or generate an error at the
quirk setup rather than when the real conflicting capability is added
should there be no available location.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
A common helper implementing the realloc algorithm for handling
capabilities.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Robin Voetter <robin@streamhpc.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Loading of a VFIO device's data can take a substantial amount of time as
the device may need to allocate resources, prepare internal data
structures, etc. This can increase migration downtime, especially for
VFIO devices with a lot of resources.
To solve this, VFIO migration uAPI defines "initial bytes" as part of
its precopy data stream. Initial bytes can be used in various ways to
improve VFIO migration performance. For example, it can be used to
transfer device metadata to pre-allocate resources in the destination.
However, for this to work we need to make sure that all initial bytes
are sent and loaded in the destination before the source VM is stopped.
Use migration switchover ack capability to make sure a VFIO device's
initial bytes are sent and loaded in the destination before the source
stops the VM and attempts to complete the migration.
This can significantly reduce migration downtime for some devices.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: YangHang Liu <yanghliu@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Pre-copy support allows the VFIO device data to be transferred while the
VM is running. This helps to accommodate VFIO devices that have a large
amount of data that needs to be transferred, and it can reduce migration
downtime.
Pre-copy support is optional in VFIO migration protocol v2.
Implement pre-copy of VFIO migration protocol v2 and use it for devices
that support it. Full description of it can be found in the following
Linux commit: 4db52602a607 ("vfio: Extend the device migration protocol
with PRE_COPY").
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: YangHang Liu <yanghliu@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
VFIO migration flags are queried once in vfio_migration_init(). Store
them in VFIOMigration so they can be used later to check the device's
migration capabilities without re-querying them.
This will be used in the next patch to check if the device supports
precopy migration.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: YangHang Liu <yanghliu@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Refactor vfio_save_block() to return the size of saved data on success
and -errno on error.
This will be used in next patch to implement VFIO migration pre-copy
support.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Tested-by: YangHang Liu <yanghliu@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Include the number of dirty pages on the vfio_get_dirty_bitmap tracepoint.
These are fetched from the newly added return value in
cpu_physical_memory_set_dirty_lebitmap().
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Message-Id: <20230530180556.24441-3-joao.m.martins@oracle.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
vbasedev->name is freed wrongly which leads to garbage VFIO trace log.
Fix it by allocating a dup of vbasedev->name and then free the dup.
Fixes: 2dca1b37a7 ("vfio/pci: add support for VF token")
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The PCI Resizable BAR (ReBAR) capability is currently hidden from the
VM because the protocol for interacting with the capability does not
support a mechanism for the device to reject an advertised supported
BAR size. However, when assigned to a VM, the act of resizing the
BAR requires adjustment of host resources for the device, which
absolutely can fail. Linux does not currently allow us to reserve
resources for the device independent of the current usage.
The only writable field within the ReBAR capability is the BAR Size
register. The PCIe spec indicates that when written, the device
should immediately begin to operate with the provided BAR size. The
spec however also notes that software must only write values
corresponding to supported sizes as indicated in the capability and
control registers. Writing unsupported sizes produces undefined
results. Therefore, if the hypervisor were to virtualize the
capability and control registers such that the current size is the
only indicated available size, then a write of anything other than
the current size falls into the category of undefined behavior,
where we can essentially expose the modified ReBAR capability as
read-only.
This may seem pointless, but users have reported that virtualizing
the capability in this way not only allows guest software to expose
related features as available (even if only cosmetic), but in some
scenarios can resolve guest driver issues. Additionally, no
regressions in behavior have been reported for this change.
A caveat here is that the PCIe spec requires for compatibility that
devices report support for a size in the range of 1MB to 512GB,
therefore if the current BAR size falls outside that range we revert
to hiding the capability.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230505232308.2869912-1-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Currently, VFIO log_sync can be issued while migration is in SETUP
state. However, doing this log_sync is at best redundant and at worst
can fail.
Redundant -- all RAM is marked dirty in migration SETUP state and is
transferred only after migration is set to ACTIVE state, so doing
log_sync during migration SETUP is pointless.
Can fail -- there is a time window, between setting migration state to
SETUP and starting dirty tracking by RAM save_live_setup handler, during
which dirty tracking is still not started. Any VFIO log_sync call that
is issued during this time window will fail. For example, this error can
be triggered by migrating a VM when a GUI is active, which constantly
calls log_sync.
Fix it by skipping VFIO log_sync while migration is in SETUP state.
Fixes: 758b96b61d ("vfio/migrate: Move switch of dirty tracking into vfio_memory_listener")
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Link: https://lore.kernel.org/r/20230403130000.6422-1-avihaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This had been pulled in via qemu/plugin.h from hw/core/cpu.h,
but that will be removed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230310195252.210956-5-richard.henderson@linaro.org>
[AJB: add various additional cases shown by CI]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-15-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
Pick names that align with the section drivers should use them from,
avoiding the confusion of calling a _finalize() function from _exit()
and generalizing the actual _finalize() to handle removing the viommu
blocker.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/167820912978.606734.12740287349119694623.stgit@omen
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Now that everything has been set up for device dirty page tracking,
query the device for device dirty page tracking support.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230307125450.62409-15-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Migrating with vIOMMU will require either tracking maximum
IOMMU supported address space (e.g. 39/48 address width on Intel)
or range-track current mappings and dirty track the new ones
post starting dirty tracking. This will be done as a separate
series, so add a live migration blocker until that is fixed.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230307125450.62409-14-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add device dirty page bitmap sync functionality. This uses the device
DMA logging uAPI to sync dirty page bitmap from the device.
Device dirty page bitmap sync is used only if all devices within a
container support device dirty page tracking.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230307125450.62409-13-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Extract the VFIO_IOMMU_DIRTY_PAGES ioctl code in vfio_get_dirty_bitmap()
to its own function.
This will help the code to be more readable after next patch will add
device dirty page bitmap sync functionality.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230307125450.62409-12-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add device dirty page tracking start/stop functionality. This uses the
device DMA logging uAPI to start and stop dirty page tracking by device.
Device dirty page tracking is used only if all devices within a
container support device dirty page tracking.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/20230307125450.62409-11-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
According to the device DMA logging uAPI, IOVA ranges to be logged by
the device must be provided all at once upon DMA logging start.
As preparation for the following patches which will add device dirty
page tracking, keep a record of all DMA mapped IOVA ranges so later they
can be used for DMA logging start.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230307125450.62409-10-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In preparation to be used in device dirty tracking, move the code that
calculate a iova/end range from the container/section. This avoids
duplication on the common checks across listener callbacks.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230307125450.62409-9-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The checks are replicated against region_add and region_del
and will be soon added in another memory listener dedicated
for dirty tracking.
Move these into a new helper for avoid duplication.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Avihai Horon <avihaih@nvidia.com>
Link: https://lore.kernel.org/r/20230307125450.62409-8-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In preparation to turn more of the memory listener checks into
common functions, one of the affected places is how we trace when
sections are skipped. Right now there is one for each. Change it
into one single tracepoint `vfio_listener_region_skip` which receives
a name which refers to the callback i.e. region_add and region_del.
Suggested-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230307125450.62409-7-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Move the code that finds the container host DMA window against a iova
range. This avoids duplication on the common checks across listener
callbacks.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Avihai Horon <avihaih@nvidia.com>
Link: https://lore.kernel.org/r/20230307125450.62409-6-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
There are already two places where dirty page bitmap allocation and
calculations are done in open code.
To avoid code duplication, introduce VFIOBitmap struct and corresponding
alloc function and use them where applicable.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230307125450.62409-5-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
If VFIO dirty pages log start/stop/sync fails during migration,
migration should be aborted as pages dirtied by VFIO devices might not
be reported properly.
This is not the case today, where in such scenario only an error is
printed.
Fix it by aborting migration in the above scenario.
Fixes: 758b96b61d ("vfio/migrate: Move switch of dirty tracking into vfio_memory_listener")
Fixes: b6dd6504e3 ("vfio: Add vfio_listener_log_sync to mark dirty pages")
Fixes: 9e7b0442f2 ("vfio: Add ioctl to get dirty pages bitmap during dma unmap")
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230307125450.62409-4-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
There are several places where the %m conversion is used if one of
vfio_dma_map(), vfio_dma_unmap() or vfio_get_dirty_bitmap() fail.
The %m usage in these places is wrong since %m relies on errno value while
the above functions don't report errors via errno.
Fix it by using strerror() with the returned value instead.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230307125450.62409-3-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Use the VFIO_CCW() QOM type-checking macro to avoid DO_UPCAST().
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230213170145.45666-7-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
QOM parenthood relationship is:
VFIOCCWDevice -> S390CCWDevice -> CcwDevice -> DeviceState
No need to double-cast, call CCW_DEVICE() on VFIOCCWDevice.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20230213170145.45666-6-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use the S390_CCW_DEVICE() QOM type-checking macro to avoid DO_UPCAST().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230213170145.45666-5-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
'cdev' is VFIOCCWDevice's private parent object.
Access it using the S390_CCW_DEVICE() QOM macro.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20230213170145.45666-4-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
QOM parenthood relationship is:
VFIOCCWDevice -> S390CCWDevice -> CcwDevice -> DeviceState
We can directly use the QOM DEVICE() macro to get the parent object.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20230213170145.45666-3-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Sort the migration section of VFIO trace events file alphabetically
and move two misplaced traces to common.c section.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Link: https://lore.kernel.org/r/20230216143630.25610-11-avihaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Now that v2 protocol implementation has been added, remove the
deprecated v1 implementation.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Link: https://lore.kernel.org/r/20230216143630.25610-10-avihaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Implement the basic mandatory part of VFIO migration protocol v2.
This includes all functionality that is necessary to support
VFIO_MIGRATION_STOP_COPY part of the v2 protocol.
The two protocols, v1 and v2, will co-exist and in the following patches
v1 protocol code will be removed.
There are several main differences between v1 and v2 protocols:
- VFIO device state is now represented as a finite state machine instead
of a bitmap.
- Migration interface with kernel is now done using VFIO_DEVICE_FEATURE
ioctl and normal read() and write() instead of the migration region.
- Pre-copy is made optional in v2 protocol. Support for pre-copy will be
added later on.
Detailed information about VFIO migration protocol v2 and its difference
compared to v1 protocol can be found here [1].
[1]
https://lore.kernel.org/all/20220224142024.147653-10-yishaih@nvidia.com/
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>.
Link: https://lore.kernel.org/r/20230216143630.25610-9-avihaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
