drv_co_block_status digs bs->file for additional, more accurate search
for hole inside region, reported as DATA by bs since 5daa74a6eb.
This accuracy is not free: assume we have qcow2 disk. Actually, qcow2
knows, where are holes and where is data. But every block_status
request calls lseek additionally. Assume a big disk, full of
data, in any iterative copying block job (or img convert) we'll call
lseek(HOLE) on every iteration, and each of these lseeks will have to
iterate through all metadata up to the end of file. It's obviously
ineffective behavior. And for many scenarios we don't need this lseek
at all.
However, lseek is needed when we have metadata-preallocated image.
So, let's detect metadata-preallocation case and don't dig qcow2's
protocol file in other cases.
The idea is to compare allocation size in POV of filesystem with
allocations size in POV of Qcow2 (by refcounts). If allocation in fs is
significantly lower, consider it as metadata-preallocation case.
102 iotest changed, as our detector can't detect shrinked file as
metadata-preallocation, which don't seem to be wrong, as with metadata
preallocation we always have valid file length.
Two other iotests have a slight change in their QMP output sequence:
Active 'block-commit' returns earlier because the job coroutine yields
earlier on a blocking operation. This operation is loading the refcount
blocks in qcow2_detect_metadata_preallocation().
Suggested-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are a few places in which we turn a number of bytes into sectors
in order to compare the result against BDRV_REQUEST_MAX_SECTORS
instead of using BDRV_REQUEST_MAX_BYTES directly.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
No one is using these functions anymore, all callers have switched to
the byte-based bdrv_pread() and bdrv_pwrite()
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On a file system used by the customer, fallocate() returns an error
if the block is not properly aligned. So, bdrv_co_pwrite_zeroes()
fails. We can handle that case the same way as it is done for the
unsupported cases, namely, call to bdrv_driver_pwritev() that writes
zeroes to an image for the unaligned chunk of the block.
Suggested-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1554474244-553661-1-git-send-email-andrey.shinkevich@virtuozzo.com
Message-Id: <1554474244-553661-1-git-send-email-andrey.shinkevich@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
For qemu-img convert, we want an operation that zeroes out the whole
image if this can be done efficiently, but that returns an error
otherwise so we don't write explicit zeroes and immediately overwrite
them with the real data, potentially doubling the amount of data to be
written.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Eric Blake <eblake@redhat.com>
There is only a single caller of bdrv_make_zero(), which is qemu-img
convert. If the function fails, we just fall back to a different method
of zeroing out blocks on the target image. There is no good reason to
print error messages on stderr when the higher level operation will
actually succeed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Eric Blake <eblake@redhat.com>
Use new qemu_iovec_init_buf() instead of
qemu_iovec_init_external( ... , 1), which simplifies the code.
While being here, use qemu_try_blockalign0 as well.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190218140926.333779-3-vsementsov@virtuozzo.com
Message-Id: <20190218140926.333779-3-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In the block layer, synchronous APIs are often implemented by creating a
coroutine that calls the asynchronous coroutine-based implementation and
then waiting for completion with BDRV_POLL_WHILE().
For this to work with iothreads (more specifically, when the synchronous
API is called in a thread that is not the home thread of the block
device, so that the coroutine will run in a different thread), we must
make sure to call aio_wait_kick() at the end of the operation. Many
places are missing this, so that BDRV_POLL_WHILE() keeps hanging even if
the condition has long become false.
Note that bdrv_dec_in_flight() involves an aio_wait_kick() call. This
corresponds to the BDRV_POLL_WHILE() in the drain functions, but it is
generally not enough for most other operations because they haven't set
the return value in the coroutine entry stub yet. To avoid race
conditions there, we need to kick after setting the return value.
The race window is small enough that the problem doesn't usually surface
in the common path. However, it does surface and causes easily
reproducible hangs if the operation can return early before even calling
bdrv_inc/dec_in_flight, which many of them do (trivial error or no-op
success paths).
The bug in bdrv_truncate(), bdrv_check() and bdrv_invalidate_cache() is
slightly different: These functions even neglected to schedule the
coroutine in the home thread of the node. This avoids the hang, but is
obviously wrong, too. Fix those to schedule the coroutine in the right
AioContext in addition to adding aio_wait_kick() calls.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
When draining a block node, we recurse to its parent and for subtree
drains also to its children. A single AIO_WAIT_WHILE() is then used to
wait for bdrv_drain_poll() to become true, which depends on all of the
nodes we recursed to. However, if the respective child or parent becomes
quiescent and calls bdrv_wakeup(), only the AioWait of the child/parent
is checked, while AIO_WAIT_WHILE() depends on the AioWait of the
original node.
Fix this by using a single AioWait for all callers of AIO_WAIT_WHILE().
This may mean that the draining thread gets a few more unnecessary
wakeups because an unrelated operation got completed, but we already
wake it up when something _could_ have changed rather than only if it
has certainly changed.
Apart from that, drain is a slow path anyway. In theory it would be
possible to use wakeups more selectively and still correctly, but the
gains are likely not worth the additional complexity. In fact, this
patch is a nice simplification for some places in the code.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
bdrv_drain_poll_top_level() was buggy because it didn't release the
AioContext lock of the node to be drained before calling aio_poll().
This way, callbacks called by aio_poll() would possibly take the lock a
second time and run into a deadlock with a nested AIO_WAIT_WHILE() call.
However, it turns out that the aio_poll() call isn't actually needed any
more. It was introduced in commit 91af091f92, which is effectively
reverted by this patch. The cases it was supposed to fix are now covered
by bdrv_drain_poll(), which waits for block jobs to reach a quiescent
state.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
bdrv_do_drained_begin/end() assume that they are called with the
AioContext lock of bs held. If we call drain functions from a coroutine
with the AioContext lock held, we yield and schedule a BH to move out of
coroutine context. This means that the lock for the home context of the
coroutine is released and must be re-acquired in the bottom half.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Truncation is the last to convert from open coded req handling to
reusing helpers. This time the permission check in prepare has to adapt
to the new caller: it checks a different permission bit, and doesn't
trigger the before write notifier.
Also, truncation should always trigger a bs->total_sectors update and in
turn call parent resize_cb. Update the condition in finish helper, too.
It's intended to do a duplicated bs->read_only check before calling
bdrv_co_write_req_prepare() so that we can be more informative with the
error message, as bdrv_co_write_req_prepare() doesn't have Error
parameter.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If we are growing the image and potentially using preallocation for the
new area, we need to make sure that no write requests are made to the
"preallocated" area which is [@old_size, @offset), not
[@offset, offset * 2 - @old_size).
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This brings the request handling logic inline with write and discard,
fixing write_gen, resize_cb, dirty bitmaps and image size refreshing.
The last of these issues broke iotest case 222, which is now fixed.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reuse the new bdrv_co_write_req_prepare/finish helpers. The variation
here is that discard requests don't affect bs->wr_highest_offset, and it
cannot extend the image.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Two problems exist when a write request that enlarges the image (i.e.
write beyond EOF) finishes:
1) parent is not notified about size change;
2) dirty bitmap is not resized although we try to set the dirty bits;
Fix them just like how bdrv_co_truncate works.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As a mechanical refactoring patch, this is the first step towards
unified and more correct write code paths. This is helpful because
multiple BlockDriverState fields need to be updated after modifying
image data, and it's hard to maintain in multiple places such as copy
offload, discard and truncate.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This matches the types used for bytes in the rest parts of block layer.
In the case of bdrv_co_truncate, new_bytes can be the image size which
probably doesn't fit in a 32 bit int.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Other I/O functions are already using a BdrvChild pointer in the API, so
make discard do the same. It makes it possible to initiate the same
permission checks before doing I/O, and much easier to share the
helper functions for this, which will be added and used by write,
truncate and copy range paths.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A few trace points that can help reveal what is happening in a copy
offloading I/O path.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Serialized writes should be used in copy-on-write of backup(sync=none)
for image fleecing scheme.
We need to change an assert in bdrv_aligned_pwritev, added in
28de2dcd88. The assert may fail now, because call to
wait_serialising_requests here may become first call to it for this
request with serializing flag set. It occurs if the request is aligned
(otherwise, we should already set serializing flag before calling
bdrv_aligned_pwritev and correspondingly waited for all intersecting
requests). However, for aligned requests, we should not care about
outdating of previously read data, as there no such data. Therefore,
let's just update an assert to not care about aligned requests.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Pass read flags and write flags separately. This is needed to handle
coming BDRV_REQ_NO_SERIALISING clearly in following patches.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Here two things are fixed:
1. Architecture
On each recursion step, we go to the child of src or dst, only for one
of them. So, it's wrong to create tracked requests for both on each
step. It leads to tracked requests duplication.
2. Wait for serializing requests on write path independently of
BDRV_REQ_NO_SERIALISING
Before commit 9ded4a0114 "backup: Use copy offloading",
BDRV_REQ_NO_SERIALISING was used for only one case: read in
copy-on-write operation during backup. Also, the flag was handled only
on read path (in bdrv_co_preadv and bdrv_aligned_preadv).
After 9ded4a0114, flag is used for not waiting serializing operations
on backup target (in same case of copy-on-write operation). This
behavior change is unsubstantiated and potentially dangerous, let's
drop it and add additional asserts and documentation.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the virtual disk size isn't aligned to full clusters,
bdrv_co_do_copy_on_readv() may get pnum == 0 before having the full
cluster completed, which will let it run into an assertion failure:
qemu-io: block/io.c:1203: bdrv_co_do_copy_on_readv: Assertion `skip_bytes < pnum' failed.
Check for EOF, assert that we read at least as much as the read request
originally wanted to have (which is true at EOF because otherwise
bdrv_check_byte_request() would already have returned an error) and
return success early even though we couldn't copy the full cluster.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit dcf94a23b1 ('block: Don't poll in parent drain callbacks')
removed polling in bdrv_child_cb_drained_begin() on the grounds that the
original bdrv_drain() already will poll and BdrvChildRole.drained_begin
calls must not cause graph changes (and therefore must not call
aio_poll() or the recursion through the graph will break.
This reasoning is correct for calls through bdrv_do_drained_begin().
However, BdrvChildRole.drained_begin is also called when a node that is
already in a drained section (i.e. bdrv_do_drained_begin() has already
returned and therefore can't poll any more) is attached to a new parent.
In this case, we must explicitly poll to have all requests completed
before the drained new child can be attached to the parent.
In bdrv_replace_child_noperm(), we know that we're not inside the
recursion of bdrv_do_drained_begin() because graph changes are not
allowed there, and bdrv_replace_child_noperm() is a graph change. The
call of BdrvChildRole.drained_begin() must therefore be followed by a
BDRV_POLL_WHILE() that waits for the completion of requests.
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This semantics is needed by drive-backup so implement it before using
this API there.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 20180703023758.14422-3-famz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
src may be NULL if BDRV_REQ_ZERO_WRITE flag is set, in this case only
check dst and dst->bs. This bug was introduced when moving in the
request tracking code from bdrv_co_copy_range, in 37aec7d75e.
This especially fixes the possible segfault when initializing src_bs
with a NULL src.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 20180703023758.14422-2-famz@redhat.com
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Now that all callers of vectored I/O have been converted
to use our preferred byte-based bdrv_co_p{read,write}v(), we can
delete the unused bdrv_co_{read,write}v().
Furthermore, this gets rid of the signature difference between the
public bdrv_co_writev() and the callback .bdrv_co_writev (the
latter still exists, because some drivers still need more work
before they are fully byte-based).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
in_flight and tracked requests need to be tracked in every layer during
recursion. For now the only user is qemu-img convert where overlapping
requests and IOThreads don't exist, therefore this change doesn't make
much difference form user point of view, but it is incorrect as part of
the API. Fix it.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When growing an image, block drivers (especially protocol drivers) may
initialise the newly added area. I/O requests to the same area need to
wait for this initialisation to be completed so that data writes don't
get overwritten and reads don't read uninitialised data.
To avoid overhead in the fast I/O path by adding new locking in the
protocol drivers and to restrict the impact to requests that actually
touch the new area, reuse the existing tracked request infrastructure in
block/io.c and mark all discard requests as serialising.
With this change, it is safe for protocol drivers to make
.bdrv_co_truncate actually asynchronous.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This moves the bdrv_truncate() implementation from block.c to block/io.c
so it can have access to the tracked requests infrastructure.
This involves making refresh_total_sectors() public (in block_int.h).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
bdrv_drain_all_*() used bdrv_next() to iterate over all root nodes and
did a subtree drain for each of them. This works fine as long as the
graph is static, but sadly, reality looks different.
If the graph changes so that root nodes are added or removed, we would
have to compensate for this. bdrv_next() returns each root node only
once even if it's the root node for multiple BlockBackends or for a
monitor-owned block driver tree, which would only complicate things.
The much easier and more obviously correct way is to fundamentally
change the way the functions work: Iterate over all BlockDriverStates,
no matter who owns them, and drain them individually. Compensation is
only necessary when a new BDS is created inside a drain_all section.
Removal of a BDS doesn't require any action because it's gone afterwards
anyway.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In the future, bdrv_drained_all_begin/end() will drain all invidiual
nodes separately rather than whole subtrees. This means that we don't
want to propagate the drain to all parents any more: If the parent is a
BDS, it will already be drained separately. Recursing to all parents is
unnecessary work and would make it an O(n²) operation.
Prepare the drain function for the changed drain_all by adding an
ignore_bds_parents parameter to the internal implementation that
prevents the propagation of the drain to BDS parents. We still (have to)
propagate it to non-BDS parents like BlockBackends or Jobs because those
are not drained separately.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Before we can introduce a single polling loop for all nodes in
bdrv_drain_all_begin(), we must make sure to run it outside of coroutine
context like we already do for bdrv_do_drained_begin().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We cannot allow aio_poll() in bdrv_drain_invoke(begin=true) until we're
done with propagating the drain through the graph and are doing the
single final BDRV_POLL_WHILE().
Just schedule the coroutine with the callback and increase bs->in_flight
to make sure that the polling phase will wait for it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_do_drained_begin() is only safe if we have a single
BDRV_POLL_WHILE() after quiescing all affected nodes. We cannot allow
that parent callbacks introduce a nested polling loop that could cause
graph changes while we're traversing the graph.
Split off bdrv_do_drained_begin_quiesce(), which only quiesces a single
node without waiting for its requests to complete. These requests will
be waited for in the BDRV_POLL_WHILE() call down the call chain.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Anything can happen inside BDRV_POLL_WHILE(), including graph
changes that may interfere with its callers (e.g. child list iteration
in recursive callers of bdrv_do_drained_begin).
Switch to a single BDRV_POLL_WHILE() call for the whole subtree at the
end of bdrv_do_drained_begin() to avoid such effects. The recursion
happens now inside the loop condition. As the graph can only change
between bdrv_drain_poll() calls, but not inside of it, doing the
recursion here is safe.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For bdrv_drain(), recursively waiting for child node requests is
pointless because we didn't quiesce their parents, so new requests could
come in anyway. Letting the function work only on a single node makes it
more consistent.
For subtree drains and drain_all, we already have the recursion in
bdrv_do_drained_begin(), so the extra recursion doesn't add anything
either.
Remove the useless code.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
We already requested that block jobs be paused in .bdrv_drained_begin,
but no guarantee was made that the job was actually inactive at the
point where bdrv_drained_begin() returned.
This introduces a new callback BdrvChildRole.bdrv_drained_poll() and
uses it to make bdrv_drain_poll() consider block jobs using the node to
be drained.
For the test case to work as expected, we have to switch from
block_job_sleep_ns() to qemu_co_sleep_ns() so that the test job is even
considered active and must be waited for when draining the node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 91af091f92 added an additional aio_poll() to BDRV_POLL_WHILE()
in order to make sure that all pending BHs are executed on drain. This
was the wrong place to make the fix, as it is useless overhead for all
other users of the macro and unnecessarily complicates the mechanism.
This patch effectively reverts said commit (the context has changed a
bit and the code has moved to AIO_WAIT_WHILE()) and instead polls in the
loop condition for drain.
The effect is probably hard to measure in any real-world use case
because actual I/O will dominate, but if I run only the initialisation
part of 'qemu-img convert' where it calls bdrv_block_status() for the
whole image to find out how much data there is copy, this phase actually
needs only roughly half the time after this patch.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
All involved nodes are already idle, we called bdrv_do_drain_begin() on
them.
The comment in the code suggested that this was not correct because the
completion of a request on one node could spawn a new request on a
different node (which might have been drained before, so we wouldn't
drain the new request). In reality, new requests to different nodes
aren't spawned out of nothing, but only in the context of a parent
request, and they aren't submitted to random nodes, but only to child
nodes. As long as we still poll for the completion of the parent request
(which we do), draining each root node separately is good enough.
Remove the additional polling code from bdrv_drain_all_begin() and
replace it with an assertion that all nodes are already idle after we
drained them separately.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
All callers pass false for the 'recursive' parameter now. Remove it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
bdrv_do_drain_begin/end() implement already everything that
bdrv_drain_all_begin/end() need and currently still do manually: Disable
external events, call parent drain callbacks, call block driver
callbacks.
It also does two more things:
The first is incrementing bs->quiesce_counter. bdrv_drain_all() already
stood out in the test case by behaving different from the other drain
variants. Adding this is not only safe, but in fact a bug fix.
The second is calling bdrv_drain_recurse(). We already do that later in
the same function in a loop, so basically doing an early first iteration
doesn't hurt.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
As long as nobody keeps the other I/O thread from working, there is no
reason why bdrv_drain() wouldn't work with cross-AioContext events. The
key is that the root request we're waiting for is in the AioContext
we're polling (which it always is for bdrv_drain()) so that aio_poll()
is woken up in the end.
Add a test case that shows that it works. Remove the comment in
bdrv_drain() that claims otherwise.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce the bdrv_co_copy_range() API for copy offloading. Block
drivers implementing this API support efficient copy operations that
avoid reading each block from the source device and writing it to the
destination devices. Examples of copy offload primitives are SCSI
EXTENDED COPY and Linux copy_file_range(2).
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180601092648.24614-2-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180421132929.21610-5-mreitz@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This flag signifies that a write request will not change the visible
disk content. With this flag set, it is sufficient to have the
BLK_PERM_WRITE_UNCHANGED permission instead of BLK_PERM_WRITE.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180421132929.21610-4-mreitz@redhat.com
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We have too many driver callback interfaces; simplify the mess
somewhat by merging the flags parameter of .bdrv_co_writev_flags()
into .bdrv_co_writev(). Note that as long as a driver doesn't set
.supported_write_flags, the flags argument will be 0 and behavior is
identical. Also note that the public function bdrv_co_writev() still
lacks a flags argument; so the driver signature is thus intentionally
slightly different. But that's not the end of the world, nor the first
time that the driver interface differs slightly from the public
interface.
Ideally, we should be rewriting all of these drivers to use modern
byte-based interfaces. But that's a more invasive patch to write
and audit, compared to the simplification done here.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Now that all drivers with aio callbacks are using the
byte-based interfaces, we can remove the sector-based versions.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Add new sector-based aio callbacks for read and write,
to match the fact that bdrv_aio_pdiscard is already byte-based.
Ideally, drivers should be converted to use coroutine callbacks
rather than aio; but that is not quite as trivial (and if we were
to do that conversion, the null-aio driver would disappear), so for
the short term, converting the signature but keeping things with
aio is easier. However, we CAN declare that a driver that uses
the byte-based aio interfaces now defaults to byte-based
operations, and must explicitly provide a refresh_limits override
to stick with larger alignments (making the alignment issues more
obvious directly in the drivers touched in the next few patches).
Once all drivers are converted, the sector-based aio callbacks will
be removed; in the meantime, a FIXME comment is added due to a
slight inefficiency that will be touched up as part of that later
cleanup.
Simplify some instances of 'bs->drv' into 'drv' while touching this,
since the local variable already exists to reduce typing.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
