As part of converting -boot to a property with a QAPI type, define
the struct and use it throughout QEMU to access boot configuration.
machine_boot_parse takes care of doing the QemuOpts->QAPI conversion by
hand, for now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414165300.555321-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the global variables with inlined helper functions. getpagesize() is very
likely annotated with a "const" function attribute (at least with glibc), and thus
optimization should apply even better.
This avoids the need for a constructor initialization too.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-12-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let devices specify transaction attributes when calling st*_dma().
Keep the default MEMTXATTRS_UNSPECIFIED in the few callers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211223115554.3155328-16-philmd@redhat.com>
Let devices specify transaction attributes when calling
dma_memory_set().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20211223115554.3155328-3-philmd@redhat.com>
The file already existed, but nobody had noticed the warning until now.
Add it at the bottom, since that is where unknown files go in legacy mode.
Fixes: 217f1b4a72 ("target-i386: Publish advised value of MSR_IA32_FEATURE_CONTROL via fw_cfg")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 8118f0950f "migration: Append JSON description of migration
stream" needs a JSON writer. The existing qobject_to_json() wasn't a
good fit, because it requires building a QObject to convert. Instead,
migration got its very own JSON writer, in commit 190c882ce2 "QJSON:
Add JSON writer". It tacitly limits numbers to int64_t, and strings
contents to characters that don't need escaping, unlike
qobject_to_json().
The previous commit factored the JSON writer out of qobject_to_json().
Replace migration's JSON writer by it.
Cc: Juan Quintela <quintela@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-17-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Extract extra pci roots addition from pc machine, which could be used by
other machines.
In order to make uefi get the extra roots, it is necessary to write extra
roots into fw_cfg. And only if the uefi knows there are extra roots,
the config spaces of devices behind the root could be obtained.
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Signed-off-by: Yubo Miao <miaoyubo@huawei.com>
Message-Id: <20201119014841.7298-3-cenjiahui@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
While the FW_CFG_DATA_GENERATOR_INTERFACE is only consumed
by a device only available using system-mode (fw_cfg), it is
implemented by a crypto component (tls-cipher-suites) which
is always available when crypto is used.
Commit 69699f3055 introduced the following error in the
qemu-storage-daemon binary:
$ echo -e \
'{"execute": "qmp_capabilities"}\r\n{"execute": "qom-list-types"}\r\n{"execute": "quit"}\r\n' \
| storage-daemon/qemu-storage-daemon --chardev stdio,id=qmp0 --monitor qmp0
{"QMP": {"version": {"qemu": {"micro": 50, "minor": 1, "major": 5}, "package": ""}, "capabilities": ["oob"]}}
{"return": {}}
missing interface 'fw_cfg-data-generator' for object 'tls-creds'
Aborted (core dumped)
Since QOM dependencies are resolved at runtime, this issue
could not be triggered at linktime, and we don't have test
running the qemu-storage-daemon binary.
Fix by always registering the QOM interface.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Fixes: 69699f3055 ("crypto/tls-cipher-suites: Produce fw_cfg consumable blob")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201006111909.2302081-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The documentation on g_byte_array_free()
<https://developer.gnome.org/glib/stable/glib-Byte-Arrays.html#g-byte-array-free>
says:
> Returns
>
> the element data if free_segment is FALSE, otherwise NULL. The element
> data should be freed using g_free().
Because we currently call g_byte_array_free() with free_segment=TRUE, we
end up passing data=NULL to fw_cfg_add_file().
On the plus side, fw_cfg_data_read() and fw_cfg_dma_transfer() both deal
with NULL data gracefully: QEMU does not crash when the guest reads such
an item, the guest just gets a properly sized, but zero-filled blob.
However, the bug breaks UEFI HTTPS boot, as the IANA_TLS_CIPHER array,
generated otherwise correctly by the "tls-cipher-suites" object, is in
effect replaced with a zero blob.
Fix the issue by passing free_segment=FALSE to g_byte_array_free():
- the caller (fw_cfg_add_from_generator()) temporarily assumes ownership
of the generated byte array,
- then ownership of the byte array is transfered to fw_cfg, as
fw_cfg_add_file() links (not copies) "data" into fw_cfg.
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: "Philippe Mathieu-Daudé" <philmd@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Fixes: 3203148917
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200916151510.22767-1-lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Commits b6d7e9b66f..a43770df5d simplified the error propagation.
Similarly to commit 6fd5bef10b "qom: Make functions taking Error**
return bool, not void", let fw_cfg_add_from_generator() return a
boolean value, not void.
This allow to simplify parse_fw_cfg() and fixes the error handling
issue reported by Coverity (CID 1430396):
In parse_fw_cfg():
Variable assigned once to a constant guards dead code.
Local variable local_err is assigned only once, to a constant
value, making it effectively constant throughout its scope.
If this is not the intent, examine the logic to see if there
is a missing assignment that would make local_err not remain
constant.
It's the call of fw_cfg_add_from_generator():
Error *local_err = NULL;
fw_cfg_add_from_generator(fw_cfg, name, gen_id, errp);
if (local_err) {
error_propagate(errp, local_err);
return -1;
}
return 0;
If it fails, parse_fw_cfg() sets an error and returns 0, which is
wrong. Harmless, because the only caller passes &error_fatal.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: Coverity CID 1430396: 'Constant' variable guards dead code (DEADCODE)
Fixes: 6552d87c48 ("softmmu/vl: Let -fw_cfg option take a 'gen_id' argument")
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200721131911.27380-3-philmd@redhat.com>
Document FWCfgDataGeneratorClass::get_data() return NULL
on error, and non-NULL on success. This allow us to simplify
fw_cfg_add_from_generator(). Since we don't need a local
variable to propagate the error, we can remove the ERRP_GUARD()
macro.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200721131911.27380-2-philmd@redhat.com>
If we want to check error after errp-function call, we need to
introduce local_err and then propagate it to errp. Instead, use
the ERRP_GUARD() macro, benefits are:
1. No need of explicit error_propagate call
2. No need of explicit local_err variable: use errp directly
3. ERRP_GUARD() leaves errp as is if it's not NULL or
&error_fatal, this means that we don't break error_abort
(we'll abort on error_set, not on error_propagate)
If we want to add some info to errp (by error_prepend() or
error_append_hint()), we must use the ERRP_GUARD() macro.
Otherwise, this info will not be added when errp == &error_fatal
(the program will exit prior to the error_append_hint() or
error_prepend() call). No such cases are being fixed here.
This commit is generated by command
sed -n '/^Firmware configuration (fw_cfg)$/,/^$/{s/^F: //p}' \
MAINTAINERS | \
xargs git ls-files | grep '\.[hc]$' | \
xargs spatch \
--sp-file scripts/coccinelle/errp-guard.cocci \
--macro-file scripts/cocci-macro-file.h \
--in-place --no-show-diff --max-width 80
Reported-by: Kevin Wolf <kwolf@redhat.com>
Reported-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200707165037.1026246-6-armbru@redhat.com>
[ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and
auto-propagated-errp.cocci to errp-guard.cocci. Commit message
tweaked again. Coccinelle script rerun for commit 3203148917
"hw/nvram/fw_cfg: Add the FW_CFG_DATA_GENERATOR interface"]
The FW_CFG_DATA_GENERATOR allows any object to produce
blob of data consumable by the fw_cfg device.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200623172726.21040-3-philmd@redhat.com>
This is the transformation explained in the commit before previous.
Takes care of just one pattern that needs conversion. More to come in
this series.
Coccinelle script:
@ depends on !(file in "hw/arm/highbank.c")@
expression bus, type_name, dev, expr;
@@
- dev = qdev_create(bus, type_name);
+ dev = qdev_new(type_name);
... when != dev = expr
- qdev_init_nofail(dev);
+ qdev_realize_and_unref(dev, bus, &error_fatal);
@@
expression bus, type_name, dev, expr;
identifier DOWN;
@@
- dev = DOWN(qdev_create(bus, type_name));
+ dev = DOWN(qdev_new(type_name));
... when != dev = expr
- qdev_init_nofail(DEVICE(dev));
+ qdev_realize_and_unref(DEVICE(dev), bus, &error_fatal);
@@
expression bus, type_name, expr;
identifier dev;
@@
- DeviceState *dev = qdev_create(bus, type_name);
+ DeviceState *dev = qdev_new(type_name);
... when != dev = expr
- qdev_init_nofail(dev);
+ qdev_realize_and_unref(dev, bus, &error_fatal);
@@
expression bus, type_name, dev, expr, errp;
symbol true;
@@
- dev = qdev_create(bus, type_name);
+ dev = qdev_new(type_name);
... when != dev = expr
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize_and_unref(dev, bus, errp);
@@
expression bus, type_name, expr, errp;
identifier dev;
symbol true;
@@
- DeviceState *dev = qdev_create(bus, type_name);
+ DeviceState *dev = qdev_new(type_name);
... when != dev = expr
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize_and_unref(dev, bus, errp);
The first rule exempts hw/arm/highbank.c, because it matches along two
control flow paths there, with different @type_name. Covered by the
next commit's manual conversions.
Missing #include "qapi/error.h" added manually.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-10-armbru@redhat.com>
[Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
The only way object_property_add() can fail is when a property with
the same name already exists. Since our property names are all
hardcoded, failure is a programming error, and the appropriate way to
handle it is passing &error_abort.
Same for its variants, except for object_property_add_child(), which
additionally fails when the child already has a parent. Parentage is
also under program control, so this is a programming error, too.
We have a bit over 500 callers. Almost half of them pass
&error_abort, slightly fewer ignore errors, one test case handles
errors, and the remaining few callers pass them to their own callers.
The previous few commits demonstrated once again that ignoring
programming errors is a bad idea.
Of the few ones that pass on errors, several violate the Error API.
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call. ich9_pm_add_properties(), sparc32_ledma_realize(),
sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize()
are wrong that way.
When the one appropriate choice of argument is &error_abort, letting
users pick the argument is a bad idea.
Drop parameter @errp and assert the preconditions instead.
There's one exception to "duplicate property name is a programming
error": the way object_property_add() implements the magic (and
undocumented) "automatic arrayification". Don't drop @errp there.
Instead, rename object_property_add() to object_property_try_add(),
and add the obvious wrapper object_property_add().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-15-armbru@redhat.com>
[Two semantic rebase conflicts resolved]
Any sub-page size update to ACPI MRs will be lost during
migration, as we use aligned size in ram_load_precopy() ->
qemu_ram_resize() path. This will result in inconsistency in
FWCfgEntry sizes between source and destination. In order to avoid
this, save and restore them separately during migration.
Up until now, this problem may not be that relevant for x86 as both
ACPI table and Linker MRs gets padded and aligned. Also at present,
qemu_ram_resize() doesn't invoke callback to update FWCfgEntry for
unaligned size changes. But since we are going to fix the
qemu_ram_resize() in the subsequent patch, the issue may become
more serious especially for RSDP MR case.
Moreover, the issue will soon become prominent in arm/virt as well
where the MRs are not padded or aligned at all and eventually have
acpi table changes as part of future additions like NVDIMM hot-add
feature.
Suggested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Acked-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200403101827.30664-3-shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----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=0aXg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd-gitlab/tags/fw_cfg-next-pull-request' into staging
Fix the fw_cfg reboot-timeout=-1 special value, add a test for it.
# gpg: Signature made Sun 03 Nov 2019 22:21:02 GMT
# gpg: using RSA key 89C1E78F601EE86C867495CBA2A3FD6EDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (Phil) <philmd@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 89C1 E78F 601E E86C 8674 95CB A2A3 FD6E DEAD C0DE
* remotes/philmd-gitlab/tags/fw_cfg-next-pull-request:
tests/fw_cfg: Test 'reboot-timeout=-1' special value
fw_cfg: Allow reboot-timeout=-1 again
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit ee5d0f89de added range checking on reboot-timeout
to only allow the range 0..65535; however both qemu and libvirt document
the special value -1 to mean don't reboot.
Allow it again.
Fixes: ee5d0f89de ("fw_cfg: Fix -boot reboot-timeout error checking")
RH bz: https://bugzilla.redhat.com/show_bug.cgi?id=1765443
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20191025165706.177653-1-dgilbert@redhat.com>
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <37ac197c-f20e-dd05-ff6a-13a2171c7148@redhat.com>
[PMD: Applied Laszlo's suggestions]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Using fw_cfg, supply logical CHS values directly from QEMU to the BIOS.
Non-standard logical geometries break under QEMU.
A virtual disk which contains an operating system which depends on
logical geometries (consistent values being reported from BIOS INT13
AH=08) will most likely break under QEMU/SeaBIOS if it has non-standard
logical geometries - for example 56 SPT (sectors per track).
No matter what QEMU will report - SeaBIOS, for large enough disks - will
use LBA translation, which will report 63 SPT instead.
In addition we cannot force SeaBIOS to rely on physical geometries at
all. A virtio-blk-pci virtual disk with 255 phyiscal heads cannot
report more than 16 physical heads when moved to an IDE controller,
since the ATA spec allows a maximum of 16 heads - this is an artifact of
virtualization.
By supplying the logical geometries directly we are able to support such
"exotic" disks.
We serialize this information in a similar way to the "bootorder"
interface.
The new fw_cfg entry is "bios-geometry".
Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com>
Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com>
Signed-off-by: Sam Eiderman <sameid@google.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
This allows to alter the contents of an already added item.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
In my "build everything" tree, changing hw/qdev-properties.h triggers
a recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Many places including hw/qdev-properties.h (directly or via hw/qdev.h)
actually need only hw/qdev-core.h. Include hw/qdev-core.h there
instead.
hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h
and hw/qdev-properties.h, which in turn includes hw/qdev-core.h.
Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h.
While there, delete a few superfluous inclusions of hw/qdev-core.h.
Touching hw/qdev-properties.h now recompiles some 1200 objects.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190812052359.30071-22-armbru@redhat.com>
In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).
The previous commits have left only the declaration of hw_error() in
hw/hw.h. This permits dropping most of its inclusions. Touching it
now recompiles less than 200 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In my "build everything" tree, changing migration/vmstate.h triggers a
recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
hw/hw.h supposedly includes it for convenience. Several other headers
include it just to get VMStateDescription. The previous commit made
that unnecessary.
Include migration/vmstate.h only where it's still needed. Touching it
now recompiles only some 1600 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-16-armbru@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In my "build everything" tree, changing migration/qemu-file-types.h
triggers a recompile of some 2600 out of 6600 objects (not counting
tests and objects that don't depend on qemu/osdep.h).
The culprit is again hw/hw.h, which supposedly includes it for
convenience.
Include migration/qemu-file-types.h only where it's needed. Touching
it now recompiles less than 200 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-10-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In my "build everything" tree, changing sysemu/reset.h triggers a
recompile of some 2600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
The main culprit is hw/hw.h, which supposedly includes it for
convenience.
Include sysemu/reset.h only where it's needed. Touching it now
recompiles less than 200 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-9-armbru@redhat.com>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
The current codebase is not specific about the endianess of the
fw_cfg 'file' entry 'reboot-timeout'.
Per docs/specs/fw_cfg.txt:
=== All Other Data Items ===
Please consult the QEMU source for the most up-to-date
and authoritative list of selector keys and their respective
items' purpose, format and writeability.
Checking the git history, this code was introduced in commit
ac05f34924, very similar to commit 3d3b8303c6 for the
'boot-menu-wait' entry, which explicitely use little-endian.
OVMF consumes 'boot-menu-wait' as little-endian, however it does
not consume 'reboot-timeout'.
Regarding the git history and OVMF use, we choose to explicit
'reboot-timeout' endianess as little-endian.
Signed-off-by: Li Qiang <liq3ea@163.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190424140643.62457-4-liq3ea@163.com>
[PMD: Reword commit description based on review comments]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Add fw_cfg_arch_key_name() which returns the name of
an architecture-specific key.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190422195020.1494-3-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Add trace events to dump the key content.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190422195020.1494-2-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The 'boot_splash_filedata_size' was introduced as a global variable
in 3d3b8303c6. This variable is used as a 'size' argument to the
fw_cfg_add_file(). This function has an interface contract with its
'data' argument, but there is no such contract for 'size' (this is
not a referenced pointer). We can simply remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190308013222.12524-7-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Commit 19bcc4bc32 ("fw_cfg: Make qemu_extra_params_fw locally",
2019-01-04) changed the storage duration of the "qemu_extra_params_fw"
array from static to automatic. This broke the interface contract on the
fw_cfg_add_file() function, which is documented as follows, in
"include/hw/nvram/fw_cfg.h":
> [...] The data referenced by the starting pointer is only linked, NOT
> copied, into the data structure of the fw_cfg device. [...]
As a result, when guest firmware fetches the "etc/boot-menu-wait" fw_cfg
file, it now sees garbage. Fix the regression by changing the storage
duration to allocated. (The call is reached at most once, on the realize
path of the board-specific fw_cfg sysbus device.)
While at it, clean up the name and the assignment of the object as well.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Fixes: 19bcc4bc32
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
These files don't seem to do anything related to ISA directly, so
there is no need to include isa.h here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1546615943-16274-1-git-send-email-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
qemu_extra_params_fw[] has external linkage, but is used
only in fw_cfg_bootsplash(), it makes sense to make it
locally.
Signed-off-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1542777026-2788-4-git-send-email-liq3ea@gmail.com>
[PMD: Removed qemu_extra_params_fw declaration in vl.c]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
fw_cfg_reboot() gets option parameter "reboot-timeout" with
qemu_opt_get(), then converts it to an integer by hand. It neglects to
check that conversion for errors, and fails to reject negative values.
Positive values above the limit get reported and replaced by the limit.
This patch checks for conversion errors properly, and reject all values
outside 0...0xffff.
Signed-off-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1542777026-2788-3-git-send-email-liq3ea@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
fw_cfg_bootsplash() gets option parameter "splash-time"
with qemu_opt_get(), then converts it to an integer by hand.
It neglects to check that conversion for errors. This is
needlessly complicated and error-prone. But as "splash-time
not specified" is not the same as "splash-time=T" for any T,
we need use qemu_opt_get() to check if splash time exists.
This patch also make the qemu exit when finding or loading
splash file failed.
Signed-off-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1542777026-2788-2-git-send-email-liq3ea@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
read_splashfile() reports "failed to read splash file" without
further details. Get the details from g_file_get_contents(), and
include them in the error message. Also remove unnecessary 'res'
variable.
Signed-off-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1541052148-28752-1-git-send-email-liq3ea@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Because they are supposed to remain const.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181114132931.22624-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We've now removed the 'old_mmio' member from MemoryRegionOps,
so we can perform the copy as a simple struct copy rather
than having to do it via a memberwise copy.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180824170422.5783-3-peter.maydell@linaro.org>
Based-on: <20180802174042.29234-1-peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For the older machines (such as Mac and SPARC) the DT nodes representing
bootdevices for disk nodes are irregular for mainly historical reasons.
Since the majority of bootdevice nodes for these machines either do not have a
separate disk node or require different (custom) names then it is much easier
for processing to just disable all suffixes for a particular machine.
Introduce a new ignore_boot_device_suffixes MachineClass property to control
bootdevice suffix generation, defaulting to false in order to preserve
compatibility.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20180810124027.10698-1-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
As part of plumbing MemTxAttrs down to the IOMMU translate method,
add MemTxAttrs as an argument to the MemoryRegion valid.accepts
callback. We'll need this for subpage_accepts().
We could take the approach we used with the read and write
callbacks and add new a new _with_attrs version, but since there
are so few implementations of the accepts hook we just change
them all.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180521140402.23318-9-peter.maydell@linaro.org
qemu-common.h includes qemu/option.h, but most places that include the
former don't actually need the latter. Drop the include, and add it
to the places that actually need it.
While there, drop superfluous includes of both headers, and
separate #include from file comment with a blank line.
This cleanup makes the number of objects depending on qemu/option.h
drop from 4545 (out of 4743) to 284 in my "build everything" tree.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-20-armbru@redhat.com>
[Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
When all the fw_cfg slots are used, a write is made outside the
bounds of the fw_cfg files array as part of the sort algorithm.
Fix it by avoiding an unnecessary array element move.
Fix also an assert while at it.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Message-Id: <20180108215007.46471-1-marcel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reintroduce the write callback that was removed when write support was
removed in commit 023e314856.
Contrary to the previous callback implementation, the write_cb
callback is called whenever a write happened, so handlers must be
ready to handle partial write as necessary.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
