While each user emulation implentation defines its own
TaskState structure, both use the same get_task_state()
declaration, in particular in common code (such gdbstub).
Declare the method once in "accel/tcg/vcpu-state.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240428221450.26460-10-philmd@linaro.org>
Forward declare TaskState in "qemu/typedefs.h" so we can
use it in generic headers like "hw/cpu/core.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240428221450.26460-9-philmd@linaro.org>
Keep all user emulation headers under the same user/ directory.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240503125202.35667-1-philmd@linaro.org>
Currently DEBUG_REMAP is a macro that needs to be manually #defined to
be activated, which makes it hard to have separate build directories
dedicated to testing the code with it. Promote it to a meson option.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240312002402.14344-1-iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A CPU's TaskState is stored in the CPUState's void *opaque field,
accessing which is somewhat awkward due to having to use a cast.
Introduce a wrapper and use it everywhere.
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240219141628.246823-3-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-4-alex.bennee@linaro.org>
The start_mmap value is write-only.
Remove the field and the defines that populated it.
Logically, this has been replaced by task_unmapped_base.
Tested-by: Helge Deller <deller@gmx.de>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While we attempt to load a ET_DYN executable far away from
TASK_UNMAPPED_BASE, we are not completely in control of the
address space layout. If the interpreter lands close to
the executable, leaving insufficient heap space, move brk.
Tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>
[rth: Re-order after ELF_ET_DYN_BASE patch so that we do not
"temporarily break" tsan, and also to minimize the changes required.
Remove image_info.reserve_brk as unused.]
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The heap starts at "brk" not "start_brk". With this fixed,
image_info.start_brk is unused and may be removed.
Tested-by: Helge Deller <deller@gmx.de>
Reviewed-by: Helge Deller <deller@gmx.de>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace the 0/-1 result with true/false.
Invert the sense of the test of all callers.
Document the function.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230707204054.8792-25-richard.henderson@linaro.org>
gdbstub cannot meaningfully handle QEMU_ERESTARTSYS, and it doesn't
need to. Add a parameter to do_guest_openat() that makes it use
openat() instead of safe_openat(), so that it becomes usable from
gdbstub.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621203627.1808446-3-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-33-alex.bennee@linaro.org>
These functions will be required by the GDB stub in order to provide
the guest view of /proc to GDB.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230621203627.1808446-2-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-32-alex.bennee@linaro.org>
This can be used to validate that an address range is mapped but without
being readable or writable.
It will be used by an updated implementation of mincore().
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20230422100314.1650-2-thomas@t-8ch.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Map the stack executable if required by default or on demand.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We had two sets of variables: arg_start/arg_end, and
arg_strings/env_strings. In linuxload.c, we set the
first pair to the bounds of the argv strings, but in
elfload.c, we set the first pair to the bounds of the
argv pointers and the second pair to the bounds of
the argv strings.
Remove arg_start/arg_end, replacing them with the standard
argc/argv/envc/envp values. Retain arg_strings/env_strings
with the meaning we were using in elfload.c.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/714
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220427025129.160184-1-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Convert the TARGET_WORDS_BIGENDIAN macro, similarly to what was done
with HOST_BIG_ENDIAN. The new TARGET_BIG_ENDIAN macro is either 0 or 1,
and thus should always be defined to prevent misuse.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Suggested-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-8-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The linux-user struct TaskState has an 'aligned(16)' attribute. When
the struct was first added in commit 851e67a1b4 in 2003, there was
a justification in a comment (still present in the source today):
/* NOTE: we force a big alignment so that the stack stored after is
aligned too */
because the final field in the struct was "uint8_t stack[0];"
But that field was removed in commit 48e15fc2d in 2010 which
switched us to allocating the stack and the TaskState separately.
Because we allocate the structure with g_new0() rather than as
a local variable, the attribute made no difference to the alignment
of the structure anyway.
Remove the unnecessary attribute, and the corresponding comment.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220114153732.3767229-2-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
It's been unused for 7 years since 907f5fddaa when linux-user stopped
queueing any signals.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220116204423.16133-2-imp@bsdimp.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Trim down the #includes in qemu.h where we can, either by
dropping unneeded headers or by moving them to user-internals.h.
This includes deleting a couple of #includes that appear at
weird points midway through the header file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-10-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Currently the linux-user qemu.h pulls in gdbstub.h. There's no real reason
why it should do this; include it directly from the C files which require
it, and drop the include line in qemu.h.
(Note that several of the C files previously relying on this indirect
include were going out of their way to only include gdbstub.h conditionally
on not CONFIG_USER_ONLY!)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-9-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
qemu.h is included in various non-linux-user files (which
mostly want the TaskState struct and the functions for
doing usermode access to guest addresses like lock_user(),
unlock_user(), get_user*(), etc).
Split out the parts that are only used in linux-user itself
into a new user-internals.h. This leaves qemu.h with basically
three things:
* the definition of the TaskState struct
* the user-access functions and macros
* do_brk()
all of which are needed by code outside linux-user that
includes qemu.h.
The addition of all the extra #include lines was done with
sed -i '/include.*qemu\.h/a #include "user-internals.h"' $(git grep -l 'include.*qemu\.h' linux-user)
(and then undoing the change to fpa11.h).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-8-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Split the safe-syscall macro from qemu.h into a new safe-syscall.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-7-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Split out the mmap prototypes into a new header user-mmap.h
which we only include where required.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-6-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Split guest-binary loader prototypes out into a new header
loader.h which we include only where required.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-5-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Split the signal related prototypes into the existing header file
signal-common.h, and include it in those places that now require it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-4-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The functions implemented in strace.c are only used in a few files in
linux-user; split them out of qemu.h and into a new strace.h header
which we include in the places that need it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-3-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We're about to move a lot of the code in qemu.h out into different
header files; fix the coding style nits first so that checkpatch
is happy with the pure code-movement patches. This is mostly
block-comment style but also a few whitespace issues.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210908154405.15417-2-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Now that we have exactly one call, it's easy to pass
in env instead of passing in the sp value.
Use target_save_altstack, which required env.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210426025334.1168495-4-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Partially revert 09f679b62d, but only for the length arguments.
Instead of reverting to long, use ssize_t. Reinstate the > 0 check
in unlock_user.
Fixes: 09f679b62d
Reported-by: Coverity (CID 1446711)
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210315204004.2025219-1-richard.henderson@linaro.org>
[lv: remove superfluous semicolon]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Implementation of Linux user emulation for Hexagon
Some common files modified in addition to new files in linux-user/hexagon
Acked-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1612763186-18161-31-git-send-email-tsimpson@quicinc.com>
[rth: Fix termbits.h on review by Laurent]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For copy_*_user, only 0 and -TARGET_EFAULT are returned; no need
to involve abi_long. Use size_t for lengths. Use bool for the
lock_user copy argument. Use ssize_t for target_strlen, because
we can't overflow the host memory space.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210212184902.1251044-19-richard.henderson@linaro.org
[PMM: moved fix for ifdef error to previous commit]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These functions are not small, except for unlock_user
without debugging enabled. Move them out of line, and
add missing braces on the way.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210212184902.1251044-18-richard.henderson@linaro.org
[PMM: fixed the sense of an ifdef test in qemu.h]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Provide both tagged and untagged versions of access_ok.
In a few places use thread_cpu, as the user is several
callees removed from do_syscall1.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The places that use these are better off using untagged
addresses, so do not provide a tagged versions. Rename
to make it clear about the address type.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We're currently open-coding the range check in access_ok;
use guest_range_valid when size != 0.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use g2h_untagged in contexts that have no cpu, e.g. the binary
loaders that operate before the primary cpu is created. As a
colollary, target_mmap and friends must use untagged addresses,
since they are used by the loaders.
Use g2h_untagged on values returned from target_mmap, as the
kernel never applies a tag itself.
Use g2h_untagged on all pc values. The only current user of
tags, aarch64, removes tags from code addresses upon branch,
so "pc" is always untagged.
Use g2h with the cpu context on hand wherever possible.
Use g2h_untagged in lock_user, which will be updated soon.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These constants are only ever used with access_ok, and friends.
Rather than translating them to PAGE_* bits, let them equal
the PAGE_* bits to begin.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Verify that addr + size - 1 does not wrap around.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210212184902.1251044-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adapt the arm semihosting support code for RISCV. This implementation
is based on the standard for RISC-V semihosting version 0.2 as
documented in
https://github.com/riscv/riscv-semihosting-spec/releases/tag/0.2
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20210107170717.2098982-6-keithp@keithp.com>
Message-Id: <20210108224256.2321-17-alex.bennee@linaro.org>
This is generic support, with the code disabled for all targets.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201021173749.111103-11-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
clang's C11 atomic_fetch_*() functions only take a C11 atomic type
pointer argument. QEMU uses direct types (int, etc) and this causes a
compiler error when a QEMU code calls these functions in a source file
that also included <stdatomic.h> via a system header file:
$ CC=clang CXX=clang++ ./configure ... && make
../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid)
Avoid using atomic_*() names in QEMU's atomic.h since that namespace is
used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h
and <stdatomic.h> can co-exist. I checked /usr/include on my machine and
searched GitHub for existing "qatomic_" users but there seem to be none.
This patch was generated using:
$ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \
sort -u >/tmp/changed_identifiers
$ for identifier in $(</tmp/changed_identifiers); do
sed -i "s%\<$identifier\>%q$identifier%g" \
$(git grep -I -l "\<$identifier\>")
done
I manually fixed line-wrap issues and misaligned rST tables.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
Functions "print_ioctl()" and "print_syscall_ret_ioctl()" are used
to print arguments of "ioctl()" with "-strace". These functions
use "thunk_print()", which is defined in "thunk.c", to print the
contents of ioctl's third arguments that are not basic types.
However, this function doesn't handle ioctls of group ioctl_tty which
are used for terminals and serial lines. These ioctls use a type
"struct termios" which thunk type is defined in a non standard
way using "STRUCT_SPECIAL()". This means that this type is not decoded
regularly using "thunk_convert()" and uses special converting functions
"target_to_host_termios()" and "host_to_target_termios()", which are defined
in "syscall.c" to decode it's values.
For simillar reasons, this type is also not printed regularly using
"thunk_print()". That is the reason why a separate printing function
"print_termios()" is defined in file "strace.c". This function decodes
and prints flag values of the "termios" structure.
Implementation notes:
Function "print_termios()" was implemented in "strace.c" using
an existing function "print_flags()" to print flag values of
"struct termios" fields. Also, recently implemented function
"print_enums()" was also used to print enumareted values which
are contained in the fields of 'struct termios'.
These flag values were defined using an existing macro "FLAG_TARGET()"
that generates aproppriate target flag values and string representations
of these flags. Also, the recently defined macro "ENUM_TARGET()" was
used to generate aproppriate enumarated values and their respective
string representations.
Function "print_termios()" was declared in "qemu.h" so that it can
be accessed in "syscall.c". Type "StructEntry" defined in
"exec/user/thunk.h" contains information that is used to decode
structure values. Field "void print(void *arg)" was added in this
structure as a special print function. Also, function "thunk_print()"
was changed a little so that it uses this special print function
in case it is defined. This printing function was instantiated with
the defined "print_termios()" in "syscall.c" in "struct_termios_def".
Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200723210233.349690-4-Filip.Bozuta@syrmia.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch implements strace argument printing functionality for following syscalls:
* truncate, ftruncate - truncate a file to a specified length
int truncate/truncate64(const char *path, off_t length)
int ftruncate/ftruncate64(int fd, off_t length)
man page: https://man7.org/linux/man-pages/man2/truncate.2.html
* getsid - get session ID
pid_t getsid(pid_t pid)
man page: https://man7.org/linux/man-pages/man2/getsid.2.html
Implementation notes:
Syscalls truncate/truncate64 take string argument types and thus a
separate print function "print_truncate/print_truncate64" is stated in
file "strace.list". This function is defined and implemented in "strace.c"
by using an existing function used to print string arguments: "print_string()".
For syscall ftruncate64, a separate printing function was also stated in
"strace.c" as it requires a special kind of handling.
The other syscalls have only primitive argument types, so the rest of the
implementation was handled by stating an appropriate printing format in file
"strace.list".
Function "regpairs_aligned()" was cut & pasted from "syscall.c" to "qemu.h"
as it is used by functions "print_truncate64()" and "print_ftruncate64()"
to print the offset arguments of "truncate64()" and "ftruncate64()".
Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200811164553.27713-3-Filip.Bozuta@syrmia.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Variable "cpu_env" is used in file "syscall.c" to store
the information about the cpu environment. This variable
is used because values of some syscalls can vary between
cpu architectures. This patch makes the "cpu_env" accessible
in "strace.c" so it can enable aproppriate "-strace" argument
printing for these syscalls. This will be a useful addition
for future "-strace" implementation in QEMU.
Implementation notes:
Functions "print_syscall()" and "print_syscall_ret()" which
are stated and defined in "qemu.h" and "strace.c" respectively
are used to print syscall arguments before and after syscall
execution. These functions were changed with addition of a
new argument "void *cpu_env". Strucute "struct syscallname"
in "strace.c" is used to store the information about syscalls.
Fields "call" and "result" represent pointers to functions which
are used to print syscall arguments before and after execution.
These fields were also changed with addition of a new "void *"
argumetn.
Also, all defined "print_*" and "print_syscall_ret*" functions
in "strace.c" were changed to have the new "void *cpu_env".
This was done to not cause build errors (even though none of
these functions use this argument).
Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200811164553.27713-2-Filip.Bozuta@syrmia.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch implements functionality for strace argument printing for ioctls.
When running ioctls through qemu with "-strace", they get printed in format:
"ioctl(fd_num,0x*,0x*) = ret_value"
where the request code an the ioctl's third argument get printed in a hexadicemal
format. This patch changes that by enabling strace to print both the request code
name and the contents of the third argument. For example, when running ioctl
RTC_SET_TIME with "-strace", with changes from this patch, it gets printed in
this way:
"ioctl(3,RTC_SET_TIME,{12,13,15,20,10,119,0,0,0}) = 0"
In case of IOC_R type ioctls, the contents of the third argument get printed
after the return value, and the argument inside the ioctl call gets printed
as pointer in hexadecimal format. For example, when running RTC_RD_TIME with
"-strace", with changes from this patch, it gets printed in this way:
"ioctl(3,RTC_RD_TIME,0x40800374) = 0 ({22,9,13,11,5,120,0,0,0})"
In case of IOC_RW type ioctls, the contents of the third argument get printed
both inside the ioctl call and after the return value.
Implementation notes:
Functions "print_ioctl()" and "print_syscall_ret_ioctl()", that are defined
in "strace.c", are listed in file "strace.list" as "call" and "result"
value for ioctl. Structure definition "IOCTLEntry" as well as predefined
values for IOC_R, IOC_W and IOC_RW were cut and pasted from file "syscall.c"
to file "qemu.h" so that they can be used by these functions to print the
contents of the third ioctl argument. Also, the "static" identifier for array
"ioctl_entries[]" was removed and this array was declared as "extern" in "qemu.h"
so that it can also be used by these functions. To decode the structure type
of the ioctl third argument, function "thunk_print()" was defined in file
"thunk.c" and its definition is somewhat simillar to that of function
"thunk_convert()".
Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200619124727.18080-3-filip.bozuta@syrmia.com>
[lv: fix close-bracket]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch implements strace argument printing functionality for following syscall:
*fallocate - manipulate file space
int fallocate(int fd, int mode, off_t offset, off_t len)
man page: https://www.man7.org/linux/man-pages/man2/fallocate.2.html
Implementation notes:
This syscall's second argument "mode" is composed of predefined values
which represent flags that determine the type of operation that is
to be performed on the file space. For that reason, a printing
function "print_fallocate" was stated in file "strace.list". This printing
function uses an already existing function "print_flags()" to print flags of
the "mode" argument. These flags are stated inside an array "falloc_flags"
that contains values of type "struct flags". These values are instantiated
using an existing macro "FLAG_GENERIC()". Most of these flags are defined
after kernel version 3.0 which is why they are enwrapped in an #ifdef
directive.
The syscall's third ant fourth argument are of type "off_t" which can
cause variations between 32/64-bit architectures. To handle this variation,
function "target_offset64()" was copied from file "strace.c" and used in
"print_fallocate" to print "off_t" arguments for 32-bit architectures.
Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200619123331.17387-7-filip.bozuta@syrmia.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Structure "struct syscallname" in file "strace.c" is used for "-strace"
to print arguments and return values of syscalls. The last field of
this structure "result" represents the calling function that prints the
return values. This field was extended in this patch so that this function
takes all syscalls arguments beside the return value. In this way, it enables
"-strace" to print arguments of syscalls that have changed after the syscall
execution. This extension will be useful as there are many syscalls that
return values inside their arguments (i.e. listxattr() that returns the list
of extended attributes inside the "list" argument).
Implementation notes:
Since there are already three existing "print_syscall_ret*" functions inside
"strace.c" ("print_syscall_ret_addr()", "print_syscall_ret_adjtimex()",
"print_syscall_ret_newselect()"), they were changed to have all syscall arguments
beside the return value. This was done so that these functions don't cause build
errors (even though syscall arguments are not used in these functions).
There is code repetition in these functions for checking the return value
and printing the approppriate error message (this code is also located in
print_syscall_ret() at the end of "strace.c"). That is the reason why a
function "syscall_print_err()" was added for this code and put inside these
functions. Functions "print_newselect()" and "print_syscall_ret_newselect()"
were changed to use this new implemented functionality and not store the syscall
argument values in separate static variables.
Signed-off-by: Filip Bozuta <Filip.Bozuta@syrmia.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200619123331.17387-2-filip.bozuta@syrmia.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
First we ensure all guest space initialisation logic comes through
probe_guest_base once we understand the nature of the binary we are
loading. The convoluted init_guest_space routine is removed and
replaced with a number of pgb_* helpers which are called depending on
what requirements we have when loading the binary.
We first try to do what is requested by the host. Failing that we try
and satisfy the guest requested base address. If all those options
fail we fall back to finding a space in the memory map using our
recently written read_self_maps() helper.
There are some additional complications we try and take into account
when looking for holes in the address space. We try not to go directly
after the system brk() space so there is space for a little growth. We
also don't want to have to use negative offsets which would result in
slightly less efficient code on x86 when it's unable to use the
segment offset register.
Less mind-binding gotos and hopefully clearer logic throughout.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200513175134.19619-5-alex.bennee@linaro.org>
Now that all uses have been migrated to `qemu_log' it is no longer
needed.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Josh Kunz <jkz@google.com>
Message-Id: <20200204025416.111409-4-jkz@google.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
