So that we have less magic numbers to deal with. This also allows us to
reuse these in the following commits.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230919102346.2117963-2-d-tatianin@yandex-team.ru>
with some rewording in
tests/qemu-iotests/298
tests/qtest/fuzz/generic_fuzz.c
tests/unit/test-throttle.c
as suggested by Eric.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Eric Blake <eblake@redhat.com>
Both gvnc and sysprof-capture come with pkg-config files, so specify
the method to find them.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A build of GCC 13.2 will have stack protector enabled by default if it
was configured with --enable-default-ssp option. For such a compiler,
it is necessary to explicitly disable stack protector when linking
without standard libraries.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230731091042.139159-2-akihiko.odaki@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
We recently moved glib detection code to meson but this changes the
linker command line from -lglib-2.0 to using a path to libglib-2.0.so.
This does not work for static linking, which is used by stress.c:
$ make V=1 tests/migration/initrd-stress.img
cc -m64 -mcx16 -o tests/migration/stress ... -static -Wl,--start-group
/usr/lib64/libglib-2.0.so -Wl,--end-group
...
bin/ld: attempted static link of dynamic object `/usr/lib64/libglib-2.0.so'
Add a specific dependency for stress.c, which is linked statically.
The compiler command line is now:
cc -m64 -mcx16 -o tests/migration/stress ... -static -pthread
-Wl,--start-group -lm /usr/lib64/libpcre.a -lglib-2.0 -Wl,--end-group
Fixes: fc9a809e0d ("build: move glib detection and workarounds to meson")
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20230525212044.30222-3-farosas@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's been deprecated since QEMU v6.2, so it should be OK to
finally remove this now.
Message-Id: <20230209161540.1054669-1-thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add support for ppc64le for guestperf.py. On ppc, console is usually
hvc0 and serial device for pseries machine is spapr-vty.
Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20220809002451.91541-3-muriloo@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
`make tests/migration/stress` fails with:
FAILED: tests/migration/stress
cc -m64 -mlittle-endian -o tests/migration/stress tests/migration/stress.p/stress.c.o -Wl,--as-needed -Wl,--no-undefined -pie -Wl,--warn-common -Wl,-z,relro -Wl,-z,now -fstack-protector-strong -static -pthread -Wl,--start-group -lgthread-2.0 -lglib-2.0 -Wl,--end-group
/usr/bin/ld: /usr/lib/gcc/ppc64le-redhat-linux/11/../../../../lib64/libglib-2.0.a(gutils.c.o): in function `.annobin_gutils.c':
(.text+0x3b4): warning: Using 'getpwuid' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/bin/ld: (.text+0x178): warning: Using 'getpwnam_r' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/bin/ld: (.text+0x1bc): warning: Using 'getpwuid_r' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/bin/ld: /usr/lib/gcc/ppc64le-redhat-linux/11/../../../../lib64/libglib-2.0.a(gthread.c.o):(.toc+0x0): undefined reference to `sysprof_clock'
/usr/bin/ld: /usr/lib/gcc/ppc64le-redhat-linux/11/../../../../lib64/libglib-2.0.a(gtrace.c.o): in function `.annobin_gtrace.c':
(.text+0x24): undefined reference to `sysprof_collector_mark_vprintf'
/usr/bin/ld: /usr/lib/gcc/ppc64le-redhat-linux/11/../../../../lib64/libglib-2.0.a(gtrace.c.o): in function `g_trace_define_int64_counter':
(.text+0x8c): undefined reference to `sysprof_collector_request_counters'
/usr/bin/ld: (.text+0x108): undefined reference to `sysprof_collector_define_counters'
/usr/bin/ld: /usr/lib/gcc/ppc64le-redhat-linux/11/../../../../lib64/libglib-2.0.a(gtrace.c.o): in function `g_trace_set_int64_counter':
(.text+0x23c): undefined reference to `sysprof_collector_set_counters'
/usr/bin/ld: /usr/lib/gcc/ppc64le-redhat-linux/11/../../../../lib64/libglib-2.0.a(gspawn.c.o):(.toc+0x0): undefined reference to `sysprof_clock'
/usr/bin/ld: /usr/lib/gcc/ppc64le-redhat-linux/11/../../../../lib64/libglib-2.0.a(gmain.c.o):(.toc+0x0): undefined reference to `sysprof_clock'
collect2: error: ld returned 1 exit status
ninja: build stopped: subcommand failed.
make: *** [Makefile:162: run-ninja] Error 1
Add sysprof-capture-4 as dependency for stress binary.
Tested on:
- CentOS Stream 9 ppc64le
- Fedora 36 x86_64
Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20220809002451.91541-2-muriloo@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Remove the unused local variable "records".
Signed-off-by: dinglimin <dinglimin@cmss.chinamobile.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Message-Id: <20220928080555.2263-1-dinglimin@cmss.chinamobile.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use the same g_mkdir_with_parents() call to create a directory on
all platforms.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20220824094029.1634519-13-bmeng.cn@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When KVM is not available, the i386 migration test also runs in a rather
slow fashion, since the guest code takes a couple of seconds to print
the "B"s on the serial console, and the migration test has to wait for
this each time. Let's increase the frequency here, too, so that the
delays in the migration tests get smaller.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220819053802.296584-4-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220822165608.2980552-5-alex.bennee@linaro.org>
The migration tests spend a lot of time waiting for a sign of live
of the guest on the serial console. The aarch64 migration code only
outputs "B"s every couple of seconds (at least it takes more than 4
seconds between each characeter on my x86 laptop). There are a lot
of migration tests, and if each test that checks for a successful
migration waits for these characters before and after migration, the
wait time sums up to multiple minutes! Let's use a shorter delay to
speed things up.
While we're at it, also remove a superfluous masking with 0xff - we're
reading and storing bytes, so the upper bits of the register do not
matter anyway.
With these changes, the test runs twice as fast on my laptop, decreasing
the total run time from approx. 8 minutes to only 4 minutes!
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220819053802.296584-3-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220822165608.2980552-4-alex.bennee@linaro.org>
The test aborts and error message as the following be throwed:
"No such file or directory: '/var/tmp/qemu-migrate-{pid}.migrate",
when the unix socket migration test nearly done. The reason is
qemu removes the unix socket file after migration before
guestperf.py script do it. So pre-check if the socket file exists
when removing it to prevent the guestperf program from aborting.
See also commit f9cc00346d ("tests/migration: fix unix socket batch
migration").
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Hyman <huangy81@chinatelecom.cn>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
migrate-set-parameters parse "downtime_limit" as integer type when
execute "migrate-set-parameters" before migration, and, the unit
dowtime_limit is milliseconds, fix this two so that test can go
smoothly.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <31d82df24cc0c468dbe4d2d86730158ebf248071.1622729934.git.huangy81@chinatelecom.cn>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
thread_id in CpuInfoFast is deprecated, parse thread-id instead
after execute qmp query-cpus-fast. fix this so that test can
go smoothly.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <584578c0a0dd781cee45f72ddf517f6e6a41c504.1622729934.git.huangy81@chinatelecom.cn>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Guestperf tool does not cover the multifd-enabled migration
currently, it is worth supporting so that developers can
analysis the migration performance with all kinds of
migration.
To request that multifd is enabled, with 4 channels:
$ ./tests/migration/guestperf.py \
--multifd --multifd-channels 4 --output output.json
To run the entire standardized set of multifd-enabled
comparisons, with unix migration:
$ ./tests/migration/guestperf-batch.py \
--dst-host localhost --transport unix \
--filter compr-multifd* --output outputdir
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <cfeeb04d17ad932c42a9871294058b77429ad1b7.1616171924.git.huangy81@chinatelecom.cn>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
when execute the following test command:
$ ./guestperf-batch.py --auto-converge \
--auto-converge-step {percent} ...
test aborts and error message be throwed as the following:
"Parameter 'x-cpu-throttle-increment' is unexpected"
The reason is that 'x-cpu-throttle-increment' has been
deprecated and 'cpu-throttle-increment' was introduced
Since v2.7. Use the new parameter instead.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <0195d34a317ce3cc417b3efd275e30cad35a7618.1616513998.git.huangy81@chinatelecom.cn>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The newer 'query-cpus-fast' command avoids side effects on the guest
execution. Note that some of the field names are different in the
'query-cpus-fast' command.
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The generic 'migrate_set_parameters' command handle all types of param.
Only the QMP commands were documented in the deprecations page, but the
rationale for deprecating applies equally to HMP, and the replacements
exist. Furthermore the HMP commands are just shims to the QMP commands,
so removing the latter breaks the former unless they get re-implemented.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
when execute the following test command:
"guestperf-batch.py --dst-host localhost --transport unix ..."
test aborts and error message as the following be throwed:
"launching VM Failed: [Errno 98] Address already in use".
The reason is that batch script use the same monitor socket
in all test cases and do not remove the socket file. The second
migration test will launch vm use the same socket file as
the first, so we get the error message. To fix it, just remove
the socket file each time we have done the migration test.
Signed-off-by: Hyman <huangy81@chinatelecom.cn>
Message-Id: <c3fc438993b87a6ab0bea3d07f6ca0260d29936e.1615397103.git.huangy81@chinatelecom.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
As per POSIX specification of limits.h [1], OS libc may define
PAGE_SIZE in limits.h.
Self defined PAGE_SIZE is frequently used in tests, to prevent
collosion of definition, we give PAGE_SIZE definitons reasonable
prefixs.
[1]: https://pubs.opengroup.org/onlinepubs/7908799/xsh/limits.h.html
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210118063808.12471-7-jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It has been marked as deprecated since QEMU v4.2, replaced by
the -overcommit option. Time to remove it now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201210155808.233895-4-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There never was a "Lesser GPL version 2.0", It is either "GPL version 2.0"
or "Lesser GPL version 2.1". This patch replaces all "Lesser GPL version 2.0"
with "Lesser GPL version 2.1" in the tests/migration folder.
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Message-Id: <20201110184223.549499-2-ganqixin@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since we are now always doing out-of-tree builds, these gitignore
files should not be necessary anymore.
Message-Id: <20200919133637.72744-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If stressone() or stress() exits it's because of a failure
because the test runs forever otherwise, so change stressone
and stress type to void to make the exit_failure() as the exit
function of main().
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200603080904.997083-3-maozhongyi@cmss.chinamobile.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
‘data’ has the possibility of memory leaks， so use the
glib macros g_autofree recommended by CODING_STYLE.rst
to automatically release the memory that returned from
g_malloc().
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200603080904.997083-2-maozhongyi@cmss.chinamobile.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200512103238.7078-7-philmd@redhat.com>
This is only needed for Python 2, which we do not support anymore.
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200204160604.19883-1-pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We've got a separate option to configure the accelerator nowadays, which
is shorter to type and the preferred way of specifying an accelerator.
Use it in the source and examples to show that it is the favored option.
(However, do not touch the places yet which also specify other machine
options or multiple accelerators - these are currently still better
handled with one single "-machine" statement instead)
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190904052739.22123-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Due to memory management rules. See HACKING.
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <dce313b46d294ada8826d34609a3447e@tpw09926dag18e.domain1.systemhost.net>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
It's not obvious that something named __init__.py actually houses
important code that isn't relevant to python packaging glue. Move the
QEMUMachine and related error classes out into their own module.
Adjust users to the new import location.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20190627212816.27298-2-jsnow@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Commit 58ea30f514 "Clean up header guards that don't match their file
name" messed up contrib/elf2dmp/qemu_elf.h and
tests/migration/migration-test.h.
It missed target/cris/opcode-cris.h and
tests/uefi-test-tools/UefiTestToolsPkg/Include/Guid/BiosTablesTest.h
due to the scripts/clean-header-guards.pl bug fixed in the previous
commit.
Commit a8b991b52d "Clean up ill-advised or unusual header guards"
missed include/hw/xen/io/ring.h for the same reason.
Commit 3979fca4b6 "disas: Rename include/disas/bfd.h back to
include/disas/dis-asm.h" neglected to update the guard symbol for the
rename.
Commit a331c6d774 "semihosting: implement a semihosting console"
created include/hw/semihosting/console.h with an ill-advised guard
symbol.
Clean them up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190604181618.19980-4-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Header guard symbols should match their file name to make guard
collisions less likely.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-6-armbru@redhat.com>
[Rebase to master: update include/hw/net/ne2000-isa.h]
This is a simple move of Python code that wraps common QEMU
functionality, and are used by a number of different tests
and scripts.
By treating that code as a real Python module, we can more easily:
* reuse code
* have a proper place for the module's own unittests
* apply a more consistent style
* generate documentation
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190206162901.19082-2-crosa@redhat.com>
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Several changes:
- We only allow generate header "inside" the tree. Why? Because we
need to connit the result, so it makes no sense to generate them on
the build dir.
- We only generate a single target each time. Getting all the
cross-compilers correctly is an impossible task. So know you do:
make -C tests/migration $target (native)
make CROSS_PREFIX=foo- -C tests/migratiion $target (cross)
And you are done.
- If we are building out of tree, we have no data about if we are
cross-compile or whatever. So instead of guess what is happening,
just do what I pointed on previous point.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20180913132313.11370-1-quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We can re-use the s390-ccw bios code to implement a small firmware
for a s390x guest which prints out the "A" and "B" characters and
modifies the memory, as required for the migration test.
[quintela: Converted the compile script to Makefile rules]
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1539078677-25396-1-git-send-email-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixed up Makefile since the aarch patch sneaked in first
This patch adds migration test support for aarch64. The test code, which
implements the same functionality as x86, is booted as a kernel in qemu.
Here are the design choices we make for aarch64:
* We choose this -kernel approach because aarch64 QEMU doesn't provide a
built-in fw like x86 does. So instead of relying on a boot loader, we
use -kernel approach for aarch64.
* The serial output is sent to PL011 directly.
* The physical memory base for mach-virt machine is 0x40000000. We change
the start_address and end_address for aarch64.
In addition to providing the binary, this patch also includes the source
code and the build script in tests/migration/aarch64. So users can change
the source and/or re-compile the binary as they wish.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Wei Huang <wei@redhat.com>
Message-Id: <1538669326-28135-1-git-send-email-wei@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This reverts commit 0ea47d0f36.
scripts/argparse.py was removed from the tree, so we don't
need this hack anymore.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180618225131.13113-4-ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This patch moves the settings related migration-test from the
migration-test.c file to a new header file.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Wei Huang <wei@redhat.com>
Message-Id: <1536174934-26022-4-git-send-email-wei@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Recently a new configure option, CROSS_CC_GUEST, was added to
$(TARGET)-softmmu/config-target.mak to support TCG-related tests. This
patch tries to leverage this option to support cross compilation when the
migration boot block file is being re-generated:
* The x86 related files are moved to a new sub-dir (named ./i386).
* A new top-layer Makefile is created in tests/migration/ directory.
This Makefile searches and parses CROSS_CC_GUEST to generate CROSS_PREFIX.
The CROSS_PREFIX, if available, is then passed to migration/$ARCH/Makefile.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Wei Huang <wei@redhat.com>
Message-Id: <1536174934-26022-3-git-send-email-wei@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The x86 boot block header currently is generated with a shell script.
To better support other CPUs (e.g. aarch64), we convert the script
into Makefile. This allows us to 1) support cross-compilation easily,
and 2) avoid creating a script file for every architecture.
Note that, in the new design, the cross compiler prefix can be specified by
setting the CROSS_PREFIX in "make" command. Also to allow gcc pre-processor
to include the C-style file correctly, it also renames the
x86-a-b-bootblock.s file extension from .s to .S.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Wei Huang <wei@redhat.com>
Message-Id: <1536174934-26022-2-git-send-email-wei@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The boot block used in the migration test is currently only
shipped as a hex (with the source in the git commit message of ea0c6d62),
change this to actually include the source.
A script is added to rebuild the header but the expectation is that
the generated hex is shipped as well as the .s, so that
there's no requirement to have just the right assembler etc.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180213100606.5379-1-dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Removed blank line at end of script
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes, with the change
to target/s390x/gen-features.c manually reverted, and blank lines
around deletions collapsed.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-3-armbru@redhat.com>
All scripts that use the QEMUMachine and QEMUQtestMachine classes
(device-crash-test, tests/migration/*, iotests.py, basevm.py)
already configure logging.
The basicConfig() call inside QEMUMachine.__init__() is being
kept just to make sure a script would still work if it didn't
configure logging.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20171005172013.3098-4-ehabkost@redhat.com>
Reviewed-by: Lukáš Doktor <ldoktor@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
