follow up fix for missing root-port AML will affect these tests
by adding non-hotpluggable Device descriptors of colplugged
bridges when bridge hotplug is disabled.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-9-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Beside BSEL numbers change (due to 2 extra root-ports in q35/miltibridge test),
following change is expected:
Scope (\_SB.PCI0)
{
...
+ Scope (S50)
+ {
+ Scope (S00)
+ {
+ Method (PCNT, 0, NotSerialized)
+ {
+ BNUM = Zero
+ DVNT (PCIU, One)
+ DVNT (PCID, 0x03)
+ }
+ }
+
+ Method (PCNT, 0, NotSerialized)
+ {
+ ^S00.PCNT
+ }
+ }
...
Method (PCNT, 0, NotSerialized)
{
+ ^S50.PCNT ()
^S13.PCNT ()
^S12.PCNT ()
^S11.PCNT ()
I practice [1] hasn't broke anything since on hardware side we unset
hotplug_handler on such intermediate port => hotplug behind it has
not been properly wired and as result not worked.
1)
Fixes: ddab4d3fae ("pcihp: compose PCNT callchain right before its user _GPE._E01")
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-8-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Following corner case wasn't covered:
-device pcie-root-port,id=NO_HOTPLUG,hotplug=off
-device pcie-root-port,bus=NO_HOTPLUG
when intermediate root-port has explicitly disabled hotplug,
all hierarchy below it is not described anymore (used to be
described in 7.2)
So as result we see only NO_HOTPLUG root-port described
+ Device (S50)
+ {
+ Name (_ADR, 0x000A0000) // _ADR: Address
+ }
and no children nor notification chain for them are being composed.
Follow up patches will fix missing leaf root-port descriptor
and notification chain that should accompany it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-7-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-6-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
expected changes:
Basically adds devices present on root bus in form:
Device (SXX)
{
Name (_ADR, 0xYYYYYYYY) // _ADR: Address
}
On top of that For q35.noacpihp, all ACPI PCI hotplug
AML is removed and _OSC get native hotplug enabled:
CreateDWordField (Arg3, 0x04, CDW2)
CreateDWordField (Arg3, 0x08, CDW3)
Local0 = CDW3 /* \_SB_.PCI0._OSC.CDW3 */
- Local0 &= 0x1E
+ Local0 &= 0x1F
If ((Arg1 != One))
{
CDW1 |= 0x08
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
test bridge AML generator with ACPI PCI hotplug disabled
(i.e. with native hotplug enabled/disabled per bridge/root port)
PS:
while at make sure that devices on pci-bridge are starting
from addr=1.0 as slot 0 is not available there and test
passes only because of a bug in ACPI hotplug that will be
fixed by follow up patch
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
for q35.noacpihp use plain default Q35 DSDT table as a starting point.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit c471eb4f40.
which broke acpi tables test and rebuild due to skipping some tests
even thought none of devices tests depend on weren't disabled.
As result it leads to some expected tables not being updated,
merge conflicts and tests failure.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-2-imammedo@redhat.com>
Acked-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost-vdpa devices can return this feature now that blockers have been
set in case some features are not met.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230303172445.1089785-15-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since some actions move to the start function instead of init, the
device features may not be the parent vdpa device's, but the one
returned by vhost backend. If transition to SVQ is supported, the vhost
backend will return _F_LOG_ALL to signal the device is migratable.
Add VHOST_F_LOG_ALL. HW dirty page tracking can be added on top of this
change if the device supports it in the future.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230303172445.1089785-14-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches enable devices to be migrated even if vdpa netdev has not
been started with x-svq. However, not all devices are migratable, so we
need to block migration if we detect that.
Block migration if we detect the device expose a feature SVQ does not
know how to work with.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230303172445.1089785-13-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A vdpa net device must initialize with SVQ in order to be migratable at
this moment, and initialization code verifies some conditions. If the
device is not initialized with the x-svq parameter, it will not expose
_F_LOG so the vhost subsystem will block VM migration from its
initialization.
Next patches change this, so we need to verify migration conditions
differently.
QEMU only supports a subset of net features in SVQ, and it cannot
migrate state that cannot track or restore in the destination. Add a
migration blocker if the device offers an unsupported feature.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230303172445.1089785-12-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Devices with CVQ need to migrate state beyond vq state. Leaving this to
future series.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230303172445.1089785-11-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Although it does not make a big difference, its more correct and
simplifies the cleanup path in subsequent patches.
Move ram_block_discard_disable(false) call to the top of
vhost_vdpa_cleanup because:
* We cannot use vhost_vdpa_first_dev after dev->opaque = NULL
assignment.
* Improve the stack order in cleanup: since it is the last action taken
in init, it should be the first at cleanup.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230303172445.1089785-10-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows net to restart the device backend to configure SVQ on it.
Ideally, these changes should not be net specific and they could be done
in:
* vhost_vdpa_set_features (with VHOST_F_LOG_ALL)
* vhost_vdpa_set_vring_addr (with .enable_log)
* vhost_vdpa_set_log_base.
However, the vdpa net backend is the one with enough knowledge to
configure everything because of some reasons:
* Queues might need to be shadowed or not depending on its kind (control
vs data).
* Queues need to share the same map translations (iova tree).
Also, there are other problems that may have solutions but complicates
the implementation at this stage:
* We're basically duplicating vhost_dev_start and vhost_dev_stop, and
they could go out of sync. If we want to reuse them, we need a way to
skip some function calls to avoid recursiveness (either vhost_ops ->
vhost_set_features, vhost_set_vring_addr, ...).
* We need to traverse all vhost_dev of a given net device twice: one to
stop and get the vq state and another one after the reset to
configure properties like address, fd, etc.
Because of that it is cleaner to restart the whole net backend and
configure again as expected, similar to how vhost-kernel moves between
userspace and passthrough.
If more kinds of devices need dynamic switching to SVQ we can:
* Create a callback struct like VhostOps and move most of the code
there. VhostOps cannot be reused since all vdpa backend share them,
and to personalize just for networking would be too heavy.
* Add a parent struct or link all the vhost_vdpa or vhost_dev structs so
we can traverse them.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230303172445.1089785-9-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The function vhost.c:vhost_dev_stop calls vhost operation
vhost_dev_start(false). In the case of vdpa it totally reset and wipes
the device, making the fetching of the vring base (virtqueue state) totally
useless.
The kernel backend does not use vhost_dev_start vhost op callback, but
vhost-user do. A patch to make vhost_user_dev_start more similar to vdpa
is desirable, but it can be added on top.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230303172445.1089785-8-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The function vhost.c:vhost_dev_stop fetches the vring base so the vq
state can be migrated to other devices. However, this is unreliable in
vdpa, since we didn't signal the device to suspend the queues, making
the value fetched useless.
Suspend the device if possible before fetching first and subsequent
vring bases.
Moreover, vdpa totally reset and wipes the device at the last device
before fetch its vrings base, making that operation useless in the last
device. This will be fixed in later patches of this series.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230303172445.1089785-7-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows vhost_vdpa to track if it is safe to get the vring base from
the device or not. If it is not, vhost can fall back to fetch idx from
the guest buffer again.
No functional change intended in this patch, later patches will use this
field.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230303172445.1089785-6-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
At this moment it is only possible to migrate to a vdpa device running
with x-svq=on. As a protective measure, the rewind of the inflight
descriptors was done at the destination. That way if the source sent a
virtqueue with inuse descriptors they are always discarded.
Since this series allows to migrate also to passthrough devices with no
SVQ, the right thing to do is to rewind at the source so the base of
vrings are correct.
Support for inflight descriptors may be added in the future.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230303172445.1089785-5-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is needed for qemu to know it can suspend the device to retrieve
its status and enable SVQ with it, so all the process is transparent to
the guest.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230303172445.1089785-4-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As SVQ can be enabled dynamically at any time, it needs to store call fd
always.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230303172445.1089785-3-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Only create iova_tree if and when it is needed.
The cleanup keeps being responsible for the last VQ but this change
allows it to merge both cleanup functions.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230303172445.1089785-2-eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
I developed the akcipher service, QoS setting, QMP/HMP commands and
statistics accounting for crypto device. Making myself as the
maintainer for QEMU's cryptodev.
Cc: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230301105847.253084-13-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now we can use "query-stats" QMP command to query statistics of
crypto devices. (Originally this was designed to show statistics
by '{"execute": "query-cryptodev"}'. Daniel Berrangé suggested that
querying configuration info by "query-cryptodev", and querying
runtime performance info by "query-stats". This makes sense!)
Example:
~# virsh qemu-monitor-command vm '{"execute": "query-stats", \
"arguments": {"target": "cryptodev"} }' | jq
{
"return": [
{
"provider": "cryptodev",
"stats": [
{
"name": "asym-verify-bytes",
"value": 7680
},
...
{
"name": "asym-decrypt-ops",
"value": 32
},
{
"name": "asym-encrypt-ops",
"value": 48
}
],
"qom-path": "/objects/cryptodev0" # support asym only
},
{
"provider": "cryptodev",
"stats": [
{
"name": "asym-verify-bytes",
"value": 0
},
...
{
"name": "sym-decrypt-bytes",
"value": 5376
},
...
],
"qom-path": "/objects/cryptodev1" # support asym/sym
}
],
"id": "libvirt-422"
}
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230301105847.253084-12-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add 'throttle-bps' and 'throttle-ops' limitation to set QoS. The
two arguments work with both QEMU command line and QMP command.
Example of QEMU command line:
-object cryptodev-backend-builtin,id=cryptodev1,throttle-bps=1600,\
throttle-ops=100
Example of QMP command:
virsh qemu-monitor-command buster --hmp qom-set /objects/cryptodev1 \
throttle-ops 100
or cancel limitation:
virsh qemu-monitor-command buster --hmp qom-set /objects/cryptodev1 \
throttle-ops 0
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230301105847.253084-11-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Account OPS/BPS for crypto device, this will be used for 'query-stats'
QEMU monitor command and QoS in the next step.
Note that a crypto device may support symmetric mode, asymmetric mode,
both symmetric and asymmetric mode. So we use two structure to
describe the statistics of a crypto device.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230301105847.253084-10-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Move queue_index, CryptoDevCompletionFunc and opaque into struct
CryptoDevBackendOpInfo, then cryptodev_backend_crypto_operation()
needs an argument CryptoDevBackendOpInfo *op_info only. And remove
VirtIOCryptoReq from cryptodev. It's also possible to hide
VirtIOCryptoReq into virtio-crypto.c in the next step. (In theory,
VirtIOCryptoReq is a private structure used by virtio-crypto only)
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230301105847.253084-9-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Example of this command:
# virsh qemu-monitor-command vm --hmp info cryptodev
cryptodev1: service=[akcipher|mac|hash|cipher]
queue 0: type=builtin
cryptodev0: service=[akcipher]
queue 0: type=lkcf
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230301105847.253084-8-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Rather than exposing akcipher service/RSA algorithm to virtio crypto
device unconditionally, detect akcipher capability from akcipher
crypto framework. This avoids unsuccessful requests.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230301105847.253084-7-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce cryptodev service type in cryptodev.json, then apply this
to related codes. Now we can remove VIRTIO_CRYPTO_SERVICE_xxx
dependence from QEMU cryptodev.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230301105847.253084-5-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce cryptodev alg type in cryptodev.json, then apply this to
related codes, and drop 'enum CryptoDevBackendAlgType'.
There are two options:
1, { 'enum': 'QCryptodevBackendAlgType',
'prefix': 'CRYPTODEV_BACKEND_ALG',
'data': ['sym', 'asym']}
Then we can keep 'CRYPTODEV_BACKEND_ALG_SYM' and avoid lots of
changes.
2, changes in this patch(with prefix 'QCRYPTODEV_BACKEND_ALG').
To avoid breaking the rule of QAPI, use 2 here.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230301105847.253084-4-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We have already used qapi to generate crypto device types, this allows
to convert type to a string 'model', so the 'model' field is not
needed.
And the 'name' field is not used by any backend driver, drop it.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230301105847.253084-3-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce QCryptodevBackendType in cryptodev.json, also apply this to
related codes. Then we can drop 'enum CryptoDevBackendOptionsType'.
Note that `CRYPTODEV_BACKEND_TYPE_NONE` is *NOT* used by anywhere, so
drop it(no 'none' enum in QCryptodevBackendType).
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230301105847.253084-2-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now that everything has been set up for device dirty page tracking,
query the device for device dirty page tracking support.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230307125450.62409-15-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Migrating with vIOMMU will require either tracking maximum
IOMMU supported address space (e.g. 39/48 address width on Intel)
or range-track current mappings and dirty track the new ones
post starting dirty tracking. This will be done as a separate
series, so add a live migration blocker until that is fixed.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230307125450.62409-14-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add device dirty page bitmap sync functionality. This uses the device
DMA logging uAPI to sync dirty page bitmap from the device.
Device dirty page bitmap sync is used only if all devices within a
container support device dirty page tracking.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230307125450.62409-13-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Extract the VFIO_IOMMU_DIRTY_PAGES ioctl code in vfio_get_dirty_bitmap()
to its own function.
This will help the code to be more readable after next patch will add
device dirty page bitmap sync functionality.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20230307125450.62409-12-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add device dirty page tracking start/stop functionality. This uses the
device DMA logging uAPI to start and stop dirty page tracking by device.
Device dirty page tracking is used only if all devices within a
container support device dirty page tracking.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/20230307125450.62409-11-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
microMIPS J & JAL instructions perform a jump in a 128MB region and 5
top bits of the address need to be preserved. This is different behavior
compared to standard mips systems, where the jump is executed within a
256MB region.
Note that microMIPS32 instruction set documentation appears to have
inconsistent information regarding JALX32 instruction - it is written in
the doc that:
"To execute a procedure call within the current 256 MB-aligned region
(...)
The low 26 bits of the target address is the target field shifted left
2 bits."
But the target address is already 26 bits. Moreover, the operation
description indicates that 28 bits are copied, so the statement about
use of 26 bits is _most likely_ incorrect and the corresponding code
remains the same as for standard mips instruction set.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@fungible.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230216051717.3911212-2-marcin.nowakowski@fungible.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In order to avoid warnings such commit c0a6665c3c ("target/i386:
Remove compilation errors when -Werror=maybe-uninitialized"),
replace all assert(0) and g_assert(0) by g_assert_not_reached().
Remove any code following g_assert_not_reached().
See previous commit for rationale.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230221232520.14480-4-philmd@linaro.org>
This board had been removed long ago in commit f169413c27
("hw/mips: Remove the 'r4k' machine")
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230202132138.30945-2-jiaxun.yang@flygoat.com>
[PMD: Mention commit f169413c27]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This is mostly code motion but a number of things needed to be done
for this minimal patch set:
- move shared structures to internals.h
- splitting some functions into user and softmmu versions
- fixing a few casting issues to keep softmmu common
More CONFIG_USER_ONLY stuff will be handled in a following patches.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-11-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-11-richard.henderson@linaro.org>
We will be needing to use these helpers between the user and softmmu
files so declare them in the headers, add a system prefix and remove
static from the implementations.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-10-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-10-richard.henderson@linaro.org>
These will be needed from multiple places in the code. They are
declared as inline so move to the header and fix up to modern coding
style.
The only other place that messes with hex stuff at the moment is the
URI handling in utils but that would be more code churn so leave for
now.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-9-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-9-richard.henderson@linaro.org>
This aids subsystems (like gdbstub) that want to trigger a flush
without pulling target specific headers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-8-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-8-richard.henderson@linaro.org>
We are about to split softmmu and user mode helpers into different
files. To facilitate this we will need to share access to the GDBState
between those files.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-7-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-7-richard.henderson@linaro.org>
In preparation for moving user/softmmu specific bits from the main
gdbstub file we need to separate the connection details into a
user/softmmu state. As these will eventually be defined in their own
files we move them out of the common GDBState structure.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230302190846.2593720-6-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-6-richard.henderson@linaro.org>
Otherwise checkpatch will throw a hissy fit on the later patches that
split this function up.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230302190846.2593720-5-alex.bennee@linaro.org>
Message-Id: <20230303025805.625589-5-richard.henderson@linaro.org>
