We use the Object type all over the place.
Forward declare it in "qemu/typedefs.h".
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200504115656.6045-2-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A socket write during vhost-user communication may trigger a disconnect
event, calling vhost_user_blk_disconnect() and clearing all the
vhost_dev structures holding data that vhost-user functions expect to
remain valid to roll back initialization correctly. Delay the cleanup to
keep vhost_dev structure valid.
There are two possible states to handle:
1. RUN_STATE_PRELAUNCH: skip bh oneshot call and perform disconnect in
the caller routine.
2. RUN_STATE_RUNNING: delay by using bh
BH changes are based on the similar changes for the vhost-user-net
device:
commit e7c83a885f
"vhost-user: delay vhost_user_stop"
Signed-off-by: Dima Stepanov <dimastep@yandex-team.ru>
Message-Id: <69b73b94dcd066065595266c852810e0863a0895.1590396396.git.dimastep@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Li Feng <fengli@smartx.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Devices may have component devices and buses.
Device realization may fail. Realization is recursive: a device's
realize() method realizes its components, and device_set_realized()
realizes its buses (which should in turn realize the devices on that
bus, except bus_set_realized() doesn't implement that, yet).
When realization of a component or bus fails, we need to roll back:
unrealize everything we realized so far. If any of these unrealizes
failed, the device would be left in an inconsistent state. Must not
happen.
device_set_realized() lets it happen: it ignores errors in the roll
back code starting at label child_realize_fail.
Since realization is recursive, unrealization must be recursive, too.
But how could a partly failed unrealize be rolled back? We'd have to
re-realize, which can fail. This design is fundamentally broken.
device_set_realized() does not roll back at all. Instead, it keeps
unrealizing, ignoring further errors.
It can screw up even for a device with no buses: if the lone
dc->unrealize() fails, it still unregisters vmstate, and calls
listeners' unrealize() callback.
bus_set_realized() does not roll back either. Instead, it stops
unrealizing.
Fortunately, no unrealize method can fail, as we'll see below.
To fix the design error, drop parameter @errp from all the unrealize
methods.
Any unrealize method that uses @errp now needs an update. This leads
us to unrealize() methods that can fail. Merely passing it to another
unrealize method cannot cause failure, though. Here are the ones that
do other things with @errp:
* virtio_serial_device_unrealize()
Fails when qbus_set_hotplug_handler() fails, but still does all the
other work. On failure, the device would stay realized with its
resources completely gone. Oops. Can't happen, because
qbus_set_hotplug_handler() can't actually fail here. Pass
&error_abort to qbus_set_hotplug_handler() instead.
* hw/ppc/spapr_drc.c's unrealize()
Fails when object_property_del() fails, but all the other work is
already done. On failure, the device would stay realized with its
vmstate registration gone. Oops. Can't happen, because
object_property_del() can't actually fail here. Pass &error_abort
to object_property_del() instead.
* spapr_phb_unrealize()
Fails and bails out when remove_drcs() fails, but other work is
already done. On failure, the device would stay realized with some
of its resources gone. Oops. remove_drcs() fails only when
chassis_from_bus()'s object_property_get_uint() fails, and it can't
here. Pass &error_abort to remove_drcs() instead.
Therefore, no unrealize method can fail before this patch.
device_set_realized()'s recursive unrealization via bus uses
object_property_set_bool(). Can't drop @errp there, so pass
&error_abort.
We similarly unrealize with object_property_set_bool() elsewhere,
always ignoring errors. Pass &error_abort instead.
Several unrealize methods no longer handle errors from other unrealize
methods: virtio_9p_device_unrealize(),
virtio_input_device_unrealize(), scsi_qdev_unrealize(), ...
Much of the deleted error handling looks wrong anyway.
One unrealize methods no longer ignore such errors:
usb_ehci_pci_exit().
Several realize methods no longer ignore errors when rolling back:
v9fs_device_realize_common(), pci_qdev_unrealize(),
spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(),
virtio_device_realize().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-17-armbru@redhat.com>
Several functions can't fail anymore: ich9_pm_add_properties(),
device_add_bootindex_property(), ppc_compat_add_property(),
spapr_caps_add_properties(), PropertyInfo.create(). Drop their @errp
parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-16-armbru@redhat.com>
when s->inflight is freed, vhost_dev_free_inflight may try to access
s->inflight->addr, it will retrigger the following issue.
==7309==ERROR: AddressSanitizer: heap-use-after-free on address 0x604001020d18 at pc 0x555555ce948a bp 0x7fffffffb170 sp 0x7fffffffb160
READ of size 8 at 0x604001020d18 thread T0
#0 0x555555ce9489 in vhost_dev_free_inflight /root/smartx/qemu-el7/qemu-test/hw/virtio/vhost.c:1473
#1 0x555555cd86eb in virtio_reset /root/smartx/qemu-el7/qemu-test/hw/virtio/virtio.c:1214
#2 0x5555560d3eff in virtio_pci_reset hw/virtio/virtio-pci.c:1859
#3 0x555555f2ac53 in device_set_realized hw/core/qdev.c:893
#4 0x5555561d572c in property_set_bool qom/object.c:1925
#5 0x5555561de8de in object_property_set_qobject qom/qom-qobject.c:27
#6 0x5555561d99f4 in object_property_set_bool qom/object.c:1188
#7 0x555555e50ae7 in qdev_device_add /root/smartx/qemu-el7/qemu-test/qdev-monitor.c:626
#8 0x555555e51213 in qmp_device_add /root/smartx/qemu-el7/qemu-test/qdev-monitor.c:806
#9 0x555555e8ff40 in hmp_device_add /root/smartx/qemu-el7/qemu-test/hmp.c:1951
#10 0x555555be889a in handle_hmp_command /root/smartx/qemu-el7/qemu-test/monitor.c:3404
#11 0x555555beac8b in monitor_command_cb /root/smartx/qemu-el7/qemu-test/monitor.c:4296
#12 0x555556433eb7 in readline_handle_byte util/readline.c:393
#13 0x555555be89ec in monitor_read /root/smartx/qemu-el7/qemu-test/monitor.c:4279
#14 0x5555563285cc in tcp_chr_read chardev/char-socket.c:470
#15 0x7ffff670b968 in g_main_context_dispatch (/lib64/libglib-2.0.so.0+0x4a968)
#16 0x55555640727c in glib_pollfds_poll util/main-loop.c:215
#17 0x55555640727c in os_host_main_loop_wait util/main-loop.c:238
#18 0x55555640727c in main_loop_wait util/main-loop.c:497
#19 0x555555b2d0bf in main_loop /root/smartx/qemu-el7/qemu-test/vl.c:2013
#20 0x555555b2d0bf in main /root/smartx/qemu-el7/qemu-test/vl.c:4776
#21 0x7fffdd2eb444 in __libc_start_main (/lib64/libc.so.6+0x22444)
#22 0x555555b3767a (/root/smartx/qemu-el7/qemu-test/x86_64-softmmu/qemu-system-x86_64+0x5e367a)
0x604001020d18 is located 8 bytes inside of 40-byte region [0x604001020d10,0x604001020d38)
freed by thread T0 here:
#0 0x7ffff6f00508 in __interceptor_free (/lib64/libasan.so.4+0xde508)
#1 0x7ffff671107d in g_free (/lib64/libglib-2.0.so.0+0x5007d)
previously allocated by thread T0 here:
#0 0x7ffff6f00a88 in __interceptor_calloc (/lib64/libasan.so.4+0xdea88)
#1 0x7ffff6710fc5 in g_malloc0 (/lib64/libglib-2.0.so.0+0x4ffc5)
SUMMARY: AddressSanitizer: heap-use-after-free /root/smartx/qemu-el7/qemu-test/hw/virtio/vhost.c:1473 in vhost_dev_free_inflight
Shadow bytes around the buggy address:
0x0c08801fc150: fa fa 00 00 00 00 04 fa fa fa fd fd fd fd fd fa
0x0c08801fc160: fa fa fd fd fd fd fd fd fa fa 00 00 00 00 04 fa
0x0c08801fc170: fa fa 00 00 00 00 00 01 fa fa 00 00 00 00 04 fa
0x0c08801fc180: fa fa 00 00 00 00 00 01 fa fa 00 00 00 00 00 01
0x0c08801fc190: fa fa 00 00 00 00 00 fa fa fa 00 00 00 00 04 fa
=>0x0c08801fc1a0: fa fa fd[fd]fd fd fd fa fa fa fd fd fd fd fd fa
0x0c08801fc1b0: fa fa fd fd fd fd fd fa fa fa fd fd fd fd fd fa
0x0c08801fc1c0: fa fa 00 00 00 00 00 fa fa fa fd fd fd fd fd fd
0x0c08801fc1d0: fa fa 00 00 00 00 00 01 fa fa fd fd fd fd fd fa
0x0c08801fc1e0: fa fa fd fd fd fd fd fa fa fa fd fd fd fd fd fd
0x0c08801fc1f0: fa fa 00 00 00 00 00 01 fa fa fd fd fd fd fd fa
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
Freed heap region: fd
Stack left redzone: f1
Stack mid redzone: f2
Stack right redzone: f3
Stack after return: f5
Stack use after scope: f8
Global redzone: f9
Global init order: f6
Poisoned by user: f7
Container overflow: fc
Array cookie: ac
Intra object redzone: bb
ASan internal: fe
Left alloca redzone: ca
Right alloca redzone: cb
==7309==ABORTING
Signed-off-by: Li Feng <fengli@smartx.com>
Message-Id: <20200417101707.14467-1-fengli@smartx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
the G_IO_HUP is watched in tcp_chr_connect, and the callback
vhost_user_blk_watch is not needed, because tcp_chr_hup is registered as
callback. And it will close the tcp link.
Signed-off-by: Li Feng <fengli@smartx.com>
Message-Id: <20200323052924.29286-1-fengli@smartx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
use the new virtio_delete_queue function to cleanup.
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Message-Id: <20200224041336.30790-3-pannengyuan@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio queues forgot to delete in unrealize, and aslo error path in
realize, this patch fix these memleaks, the leak stack is as follow:
Direct leak of 114688 byte(s) in 16 object(s) allocated from:
#0 0x7f24024fdbf0 in calloc (/lib64/libasan.so.3+0xcabf0)
#1 0x7f2401642015 in g_malloc0 (/lib64/libglib-2.0.so.0+0x50015)
#2 0x55ad175a6447 in virtio_add_queue /mnt/sdb/qemu/hw/virtio/virtio.c:2327
#3 0x55ad17570cf9 in vhost_user_blk_device_realize /mnt/sdb/qemu/hw/block/vhost-user-blk.c:419
#4 0x55ad175a3707 in virtio_device_realize /mnt/sdb/qemu/hw/virtio/virtio.c:3509
#5 0x55ad176ad0d1 in device_set_realized /mnt/sdb/qemu/hw/core/qdev.c:876
#6 0x55ad1781ff9d in property_set_bool /mnt/sdb/qemu/qom/object.c:2080
#7 0x55ad178245ae in object_property_set_qobject /mnt/sdb/qemu/qom/qom-qobject.c:26
#8 0x55ad17821eb4 in object_property_set_bool /mnt/sdb/qemu/qom/object.c:1338
#9 0x55ad177aeed7 in virtio_pci_realize /mnt/sdb/qemu/hw/virtio/virtio-pci.c:1801
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200224041336.30790-2-pannengyuan@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The Chardev events are listed in the QEMUChrEvent enum.
By using the enum in the IOEventHandler typedef we:
- make the IOEventHandler type more explicit (this handler
process out-of-band information, while the IOReadHandler
is in-band),
- help static code analyzers.
This patch was produced with the following spatch script:
@match@
expression backend, opaque, context, set_open;
identifier fd_can_read, fd_read, fd_event, be_change;
@@
qemu_chr_fe_set_handlers(backend, fd_can_read, fd_read, fd_event,
be_change, opaque, context, set_open);
@depends on match@
identifier opaque, event;
identifier match.fd_event;
@@
static
-void fd_event(void *opaque, int event)
+void fd_event(void *opaque, QEMUChrEvent event)
{
...
}
Then the typedef was modified manually in
include/chardev/char-fe.h.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20191218172009.8868-15-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Chardev events are listed in the QEMUChrEvent enum. To be
able to use this enum in the IOEventHandler typedef, we need to
explicit all the events ignored by this frontend, to silent the
following GCC warning:
CC s390x-softmmu/hw/block/vhost-user-blk.o
hw/block/vhost-user-blk.c: In function ‘vhost_user_blk_event’:
hw/block/vhost-user-blk.c:370:5: error: enumeration value ‘CHR_EVENT_BREAK’ not handled in switch [-Werror=switch]
370 | switch (event) {
| ^~~~~~
hw/block/vhost-user-blk.c:370:5: error: enumeration value ‘CHR_EVENT_MUX_IN’ not handled in switch [-Werror=switch]
hw/block/vhost-user-blk.c:370:5: error: enumeration value ‘CHR_EVENT_MUX_OUT’ not handled in switch [-Werror=switch]
cc1: all warnings being treated as errors
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20191218172009.8868-10-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Same rational as: e6cc11d64f
Of the 3 virtqueues, seabios only sets cmd, leaving ctrl
and event without a physical address. This can cause
vhost_verify_ring_part_mapping to return ENOMEM, causing
the following logs:
qemu-system-x86_64: Unable to map available ring for ring 0
qemu-system-x86_64: Verify ring failure on region 0
This has already been fixed for vhost scsi devices and was
recently vhost-user scsi devices. This commit fixes it for
vhost-user-blk devices.
Suggested-by: Phillippe Mathieu-Daude <philmd@redhat.com>
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <1566498865-55506-1-git-send-email-raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator. Evidence:
* It's included widely: in my "build everything" tree, changing
sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
objects (not counting tests and objects that don't depend on
qemu/osdep.h, down from 5400 due to the previous two commits).
* It pulls in more than a dozen additional headers.
Split stuff related to run state management into its own header
sysemu/runstate.h.
Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200. Touching new sysemu/runstate.h recompiles some 500 objects.
Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 1800 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h, down from 5400 due to the
previous commit).
Several headers include sysemu/sysemu.h just to get typedef
VMChangeStateEntry. Move it from sysemu/sysemu.h to qemu/typedefs.h.
Spell its structure tag the same while there. Drop the now
superfluous includes of sysemu/sysemu.h from headers.
Touching sysemu/sysemu.h now recompiles some 1100 objects.
qemu/uuid.h also drops from 1800 to 1100, and
qapi/qapi-types-run-state.h from 5000 to 4400.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-29-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In my "build everything" tree, changing hw/qdev-properties.h triggers
a recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Many places including hw/qdev-properties.h (directly or via hw/qdev.h)
actually need only hw/qdev-core.h. Include hw/qdev-core.h there
instead.
hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h
and hw/qdev-properties.h, which in turn includes hw/qdev-core.h.
Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h.
While there, delete a few superfluous inclusions of hw/qdev-core.h.
Touching hw/qdev-properties.h now recompiles some 1200 objects.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190812052359.30071-22-armbru@redhat.com>
In order to avoid migration issues, we introduce a "use-started"
property to the base virtio device to indicate whether use
"started" flag or not. This property will be true by default and
set to false when machine type <= 4.0.
Suggested-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Message-Id: <20190626023130.31315-2-xieyongji@baidu.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since we now support the message VHOST_USER_GET_INFLIGHT_FD
and VHOST_USER_SET_INFLIGHT_FD. The backend is able to restart
safely because it can track inflight I/O in shared memory.
This patch allows qemu to reconnect the backend after
connection closed.
Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Signed-off-by: Ni Xun <nixun@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Message-Id: <20190320112646.3712-7-xieyongji@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a return value for vhost_user_blk_start() to check whether
we start vhost-user backend successfully or not.
Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Message-Id: <20190320112646.3712-6-xieyongji@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We should only start vhost-user backend at the first kick for
virtio 1.0 transitional devices.
Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Message-Id: <20190320112646.3712-5-xieyongji@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use started flag in vhost_user_blk_set_status() to decide if
starting vhost-user backend or not.
Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Message-Id: <20190320112646.3712-4-xieyongji@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds support for vhost-user-blk device to get/set
inflight buffer from/to backend.
Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Message-Id: <20190228085355.9614-6-xieyongji@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Take a VhostUserState* that can be pre-allocated, and initialize it
with the associated chardev.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Message-Id: <20190308140454.32437-4-marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Linux commit 1f23816b8 "virtio_blk: add discard and write zeroes support"
added the support in the Guest kernel, while here also enable the features
support with vhost-user-blk driver. Also enable the test example utility
with DISCARD and WRITE ZEROES commands.
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Memset vhost_dev to zero in the vhost_dev_cleanup function.
This causes dev.vqs to be NULL, so that
vqs does not free up space when calling the g_free function.
This will result in a memory leak. But you can't release vqs
directly in the vhost_dev_cleanup function, because vhost_net
will also call this function, and vhost_net's vqs is assigned by array.
In order to solve this problem, we first save the pointer of vqs,
and release the space of vqs after vhost_dev_cleanup is called.
Signed-off-by: Jian Wang <wangjian161@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some old guests (before commit 7a11370e5: "virtio_blk: enable VQs early")
kick virtqueue before setting VIRTIO_CONFIG_S_DRIVER_OK. This violates
the virtio spec. But virtio 1.0 transitional devices support this behaviour.
So we should start vhost when guest kicks in this case.
Signed-off-by: Yongji Xie <xieyongji@baidu.com>
Signed-off-by: Chai Wen <chaiwen@baidu.com>
Signed-off-by: Ni Xun <nixun@baidu.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Read only feature shouldn't be negotiable, because if the
backend device reported Read only feature supported, QEMU
host driver shouldn't change backend's RO attribute. While
here, also enable the vhost-user-blk test utility to test
RO feature.
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When multi queue is enabled e.g. for a virtio-net device,
each queue pair will have a vhost_dev, and the only thing
shared between vhost devs currently is the chardev. This
patch introduces a vhost-user state structure which will
be shared by all vhost devs of the same virtio device.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As soon as vhost-user init is done, the backend may send
VHOST_USER_SLAVE_CONFIG_CHANGE_MSG, so let's set the
notification callback before it.
Also, it will be used to know whether the device supports
the config feature to advertize it or not.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Changpeng Liu <changpeng.liu@intel.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes, with the change
to target/s390x/gen-features.c manually reverted, and blank lines
around deletions collapsed.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-3-armbru@redhat.com>
This commit introduces a new vhost-user device for block, it uses a
chardev to connect with the backend, same with Qemu virito-blk device,
Guest OS still uses the virtio-blk frontend driver.
To use it, start QEMU with command line like this:
qemu-system-x86_64 \
-chardev socket,id=char0,path=/path/vhost.socket \
-device vhost-user-blk-pci,chardev=char0,num-queues=2, \
bootindex=2... \
Users can use different parameters for `num-queues` and `bootindex`.
Different with exist Qemu virtio-blk host device, it makes more easy
for users to implement their own I/O processing logic, such as all
user space I/O stack against hardware block device. It uses the new
vhost messages(VHOST_USER_GET_CONFIG) to get block virtio config
information from backend process.
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
