By accessing MemoryRegion internals, amdvi_init() gives the false
idea that the PCI BAR can be modified. However this isn't true
(at least the model isn't ready for that): the device is explicitly
maps at the BAR at the fixed AMDVI_BASE_ADDR address in
amdvi_sysbus_realize(). Since the SysBus API isn't designed to
remap regions, directly use the fixed address in amdvi_init().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230313153031.86107-3-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
hw/i386/amd_iommu.c seems unmaintained:
After commit 1c7955c450 ("x86-iommu: introduce parent class",
2016-07-14), almost no feature added, 2 bug fixes, other changes
are generic tree-wide API cleanups.
Cc: Roman Kapl <rka@sysgo.com>
Cc: Wei Huang <wei.huang2@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: David Kiarie <davidkiarie4@gmail.com>
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230313153031.86107-2-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Optimize the virtio-balloon feature on the ARM platform by adding
a variable to keep track of the current hot-plugged pc-dimm size,
instead of traversing the virtual machine's memory modules to count
the current RAM size during the balloon inflation or deflation
process. This variable can be updated only when plugging or unplugging
the device, which will result in an increase of approximately 60%
efficiency of balloon process on the ARM platform.
We tested the total amount of time required for the balloon inflation process on ARM:
inflate the balloon to 64GB of a 128GB guest under stress.
Before: 102 seconds
After: 42 seconds
Signed-off-by: Qi Xi <xiqi2@huawei.com>
Signed-off-by: Ming Yang yangming73@huawei.com
Message-Id: <e13bc78f96774bfab4576814c293aa52@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
The current model of memory mapping at the back-end works fine where a
standard call to mmap() (for the respective file descriptor) is enough
before the front-end can start accessing the guest memory.
There are other complex cases though where the back-end needs more
information and simple mmap() isn't enough. For example Xen, a type-1
hypervisor, currently supports memory mapping via two different methods,
foreign-mapping (via /dev/privcmd) and grant-dev (via /dev/gntdev). In
both these cases, the back-end needs to call mmap() and ioctl(), with
extra information like the Xen domain-id of the guest whose memory we
are trying to map.
Add a new protocol feature, 'VHOST_USER_PROTOCOL_F_XEN_MMAP', which lets
the back-end know about the additional memory mapping requirements.
When this feature is negotiated, the front-end will send the additional
information within the memory regions themselves.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <6d0bd7f0e1aeec3ddb603ae4ff334c75c7d0d7b3.1678351495.git.viresh.kumar@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
The same layout is defined twice, once in "single memory region
description" and then in "memory regions description".
Separate out details of memory region from these two and reuse the same
definition later on.
While at it, also rename "memory regions description" to "multiple
memory regions description", to avoid potential confusion around similar
names. And define single region before multiple ones.
This is just a documentation optimization, the protocol remains the same.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <7c3718e5eb99178b22696682ae73aca6df1899c7.1678351495.git.viresh.kumar@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
These hooks were introduced in:
80a1ea3748 ("memory: move ioeventfd ops to MemoryListener", 2012-02-29)
But they seem to be never used. Drop them.
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20230306193209.516011-1-peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This switch had been disabled by default by accident in commit
c55cf6ab03. But we should enable it by default instead to avoid
regressions in the QOM device hierarchy.
Fixes: c55cf6ab03 ("configure, meson: move some default-disabled options to meson_options.txt")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230417130037.236747-3-thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
* hw/arm: Fix some typos in comments (most found by codespell)
* exynos: Fix out-of-bounds access in exynos4210_gcomp_find debug printf
* Orangepi-PC, Cubieboard: add Allwinner WDT watchdog emulation
* tests/avocado: Add reboot tests to Cubieboard
* hw/timer/imx_epit: Fix bugs in timer limit checking
* target/arm: Remove KVM AArch32 CPU definitions
* hw/arm/virt: Restrict Cortex-A7 check to TCG
* target/arm: Initialize debug capabilities only once
* target/arm: Implement FEAT_PAN3
* docs/devel/kconfig.rst: Fix incorrect markup
* target/arm: Report pauth information to gdb as 'pauth_v2'
* mcimxd7-sabre, mcimx6ul-evk: Correctly model the way the PHY
on the second ethernet device must be configured via the
first one
-----BEGIN PGP SIGNATURE-----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=YUUL
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20230420' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* hw/arm: Fix some typos in comments (most found by codespell)
* exynos: Fix out-of-bounds access in exynos4210_gcomp_find debug printf
* Orangepi-PC, Cubieboard: add Allwinner WDT watchdog emulation
* tests/avocado: Add reboot tests to Cubieboard
* hw/timer/imx_epit: Fix bugs in timer limit checking
* target/arm: Remove KVM AArch32 CPU definitions
* hw/arm/virt: Restrict Cortex-A7 check to TCG
* target/arm: Initialize debug capabilities only once
* target/arm: Implement FEAT_PAN3
* docs/devel/kconfig.rst: Fix incorrect markup
* target/arm: Report pauth information to gdb as 'pauth_v2'
* mcimxd7-sabre, mcimx6ul-evk: Correctly model the way the PHY
on the second ethernet device must be configured via the
first one
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmRBDfkZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3rtLD/93hJ+CEUnATXx7Ic7g0EvN
# eXIMsgd80pd1gn4PKzP9lol6I40VDuozs9mb9jP6+Hc0tEoOua4KlIvyMlYy4wSx
# eJBqt/gx/N/V+jwVG8seY+ifLIzECMLMOQIRQqQoVk+scENuiJIXcJRH5A1eUWNb
# iV0QfJa1gQrKyyIG9vNfZ+cS+xy0bl0E9FlZ0ty3zeh0xBaMhUqnpraTVLISWelP
# OEovcIBEzvD/ngj+7F/xKBGgtSTZ1FuN5p/oOFDCH2Fihe2+wuw7B3Rc1SbHLG7n
# Wr4JZozdPbnudhrZgn+1A9SCFhH+B8k/QlKY2Qc+w+GrnC0JpJAmqtaF2aIaepPo
# kfbTUshDstIZ7MnCeAa+SWn2Exgrsn0Gv9nWdOrPgrvo0bqK6ceAhchi5nFmkkaJ
# MOy+Xx5GIAE91418wR8C2TlrTl58A81s15AYY1D7nZ0GeuZV5io7wPIAOWa14rOQ
# RdvQ/0rcZ+IkOFXz5Zj/L/Y/W4BpDyfuUVzLAah56zYkuV4im2cLt3YAOMFYZjjO
# 6W1sdbAcuA5QFmO4v5VmcTU8t/B423QzcnssE6sbM0nazMh/i6kjzvJUhdJTQmi+
# lKjIe+MHutTgrbjrwemjiafk3dOpFpKtso/4C/dhP2UfDIcKuGXNpSYxCvoknO2j
# TWvxRvir/PC7gzUzA4CrwQ==
# =YUUL
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 20 Apr 2023 11:03:37 AM BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
* tag 'pull-target-arm-20230420' of https://git.linaro.org/people/pmaydell/qemu-arm: (21 commits)
arm/mcimx7d-sabre: Set fec2-phy-connected property to false
fsl-imx7: Add fec[12]-phy-connected properties
arm/mcimx6ul-evk: Set fec1-phy-connected property to false
fsl-imx6ul: Add fec[12]-phy-connected properties
hw/net/imx_fec: Support two Ethernet interfaces connected to single MDIO bus
target/arm: Report pauth information to gdb as 'pauth_v2'
docs/devel/kconfig.rst: Fix incorrect markup
target/arm: Implement FEAT_PAN3
target/arm: Don't set ISV when reporting stage 1 faults in ESR_EL2
target/arm: Pass ARMMMUFaultInfo to merge_syn_data_abort()
target/arm: Initialize debug capabilities only once
hw/arm/virt: Restrict Cortex-A7 check to TCG
target/arm: Remove KVM AArch32 CPU definitions
hw/timer/imx_epit: fix limit check
hw/timer/imx_epit: don't shadow variable
tests/avocado: Add reboot tests to Cubieboard
hw/arm: Add WDT to Allwinner-H3 and Orangepi-PC
hw/arm: Add WDT to Allwinner-A10 and Cubieboard
hw/watchdog: Allwinner WDT emulation for system reset
exynos: Fix out-of-bounds access in exynos4210_gcomp_find debug printf
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is no reason to block it as it has nothing to do with the vrings.
All the support of the feature comes via config space.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Suggested-by: Alvaro Karsz <alvaro.karsz@solid-run.com>
Message-Id: <20230307170018.260557-1-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Update mailmap to indicate ani@anisinha.ca and anisinha@redhat.com are one and
the same person. Additionally update MAINTAINERS and bits documentation to use
my work (redhat) email.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20230320114233.90638-1-anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When a virtqueue size is changed by the guest via
virtio_queue_set_num(), its region cache is not automatically updated.
If the size was increased, this could lead to accessing the cache out
of bounds. For example, in vring_get_used_event():
static inline uint16_t vring_get_used_event(VirtQueue *vq)
{
return vring_avail_ring(vq, vq->vring.num);
}
static inline uint16_t vring_avail_ring(VirtQueue *vq, int i)
{
VRingMemoryRegionCaches *caches = vring_get_region_caches(vq);
hwaddr pa = offsetof(VRingAvail, ring[i]);
if (!caches) {
return 0;
}
return virtio_lduw_phys_cached(vq->vdev, &caches->avail, pa);
}
vq->vring.num will be greater than caches->avail.len, which will
trigger a failed assertion down the call path of
virtio_lduw_phys_cached().
Fix this by calling virtio_init_region_cache() after
virtio_queue_set_num() if we are not already calling
virtio_queue_set_rings(). In the legacy path this is already done by
virtio_queue_update_rings().
Signed-off-by: Carlos López <clopez@suse.de>
Message-Id: <20230317002749.27379-1-clopez@suse.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a test case for the TPM TIS I2C device exercising most of its
functionality, including localities.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Ninad Palsule<ninad@linux.ibm.com>
Message-id: 20230331173051.3857801-4-stefanb@linux.ibm.com
To be able to remove tpm_tis_base_addr from test cases that do not really
need it move the tpm_util_tis_transmit() function into tpm-tis-utils.c and
rename it to tpm_tis_transmit().
Fix a locality parameter in a test case on the way.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20230331173051.3857801-3-stefanb@linux.ibm.com
Add read and write functions for accessing registers of I2C devices
connected to the Aspeed I2C controller.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-id: 20230331173051.3857801-2-stefanb@linux.ibm.com
Add a new buildroot image based test that attaches a TPM emulator to the
I2C bus and checks for a known PCR0 value for the image that was booted.
Note that this does not tear down swtpm process when qemu execution fails.
The swtpm process will exit when qemu exits if a connection has been
made, but if the test errors before connection then the swtpm process
will still be around.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Message-id: 20230328120844.190914-1-joel@jms.id.au
Qemu already supports devices attached to ISA and sysbus. This drop adds
support for the I2C bus attached TPM devices. I2C model only supports
TPM2 protocol.
This commit includes changes for the common code.
- Added I2C emulation model. Logic was added in the model to temporarily
cache the data as I2C interface works per byte basis.
- New tpm type "tpm-tis-i2c" added for I2C support. The user has to
provide this string on command line.
Testing:
TPM I2C device module is tested using SWTPM (software based TPM
package). Qemu uses the rainier machine and is connected to swtpm over
the socket interface.
The command to start swtpm is as follows:
$ swtpm socket --tpmstate dir=/tmp/mytpm1 \
--ctrl type=unixio,path=/tmp/mytpm1/swtpm-sock \
--tpm2 --log level=100
The command to start qemu is as follows:
$ qemu-system-arm -M rainier-bmc -nographic \
-kernel ${IMAGEPATH}/fitImage-linux.bin \
-dtb ${IMAGEPATH}/aspeed-bmc-ibm-rainier.dtb \
-initrd ${IMAGEPATH}/obmc-phosphor-initramfs.rootfs.cpio.xz \
-drive file=${IMAGEPATH}/obmc-phosphor-image.rootfs.wic.qcow2,if=sd,index=2 \
-net nic -net user,hostfwd=:127.0.0.1:2222-:22,hostfwd=:127.0.0.1:2443-:443 \
-chardev socket,id=chrtpm,path=/tmp/mytpm1/swtpm-sock \
-tpmdev emulator,id=tpm0,chardev=chrtpm \
-device tpm-tis-i2c,tpmdev=tpm0,bus=aspeed.i2c.bus.12,address=0x2e
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Tested-by: Joel Stanley <joel@jms.id.au>
Message-id: 20230414220754.1191476-4-ninadpalsule@us.ibm.com
Qemu already supports devices attached to ISA and sysbus. This drop adds
support for the I2C bus attached TPM devices.
This commit includes changes for the common code.
- Added support for the new checksum registers which are required for
the I2C support. The checksum calculation is handled in the qemu
common code.
- Added wrapper function for read and write data so that I2C code can
call it without MMIO interface.
The TPM TIS I2C spec describes in the table in section "Interface Locality
Usage per Register" that the TPM_INT_ENABLE and TPM_INT_STATUS registers
must be writable for any locality even if the locality is not the active
locality. Therefore, remove the checks whether the writing locality is the
active locality for these registers.
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Tested-by: Joel Stanley <joel@jms.id.au>
Message-id: 20230414220754.1191476-3-ninadpalsule@us.ibm.com
This is a documentation change for I2C TPM device support.
Qemu already supports devices attached to ISA and sysbus.
This drop adds support for the I2C bus attached TPM devices.
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20230414220754.1191476-2-ninadpalsule@us.ibm.com
On mcimx7d-sabre, the MDIO bus is connected to the first Ethernet
interface. Set fec2-phy-connected to false to reflect this.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20230315145248.1639364-6-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add fec[12]-phy-connected properties and use it to set phy-connected
and phy-consumer properties for imx_fec.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20230315145248.1639364-5-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On mcimx6ul-evk, the MDIO bus is connected to the second Ethernet
interface. Set fec1-phy-connected to false to reflect this.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20230315145248.1639364-4-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add fec[12]-phy-connected properties and use it to set phy-connected
and phy-consumer properties for imx_fec.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20230315145248.1639364-3-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to QEMU's support policy, we stop supporting the previous
major release two years after the the new major release has been
published. So we can stop testing FreeBSD 12 now and should switch
our FreeBSD VM to version 13 instead.
Some changes are needed for this update: The downloadable .ISO images
do not use the serial port as console by default anymore, so they
are not usable in the same way as with FreeBSD 12. Fortunately, the
FreeBSD project now also offers some pre-installed CI images that
have the serial console enabled, so we can use those now, with the
benefit that we can skip almost all parts of the previous installation
process.
Message-Id: <20230419144553.719749-1-thuth@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The SOC on i.MX6UL and i.MX7 has 2 Ethernet interfaces. The PHY on each may
be connected to separate MDIO busses, or both may be connected on the same
MDIO bus using different PHY addresses. Commit 461c51ad42 ("Add a phy-num
property to the i.MX FEC emulator") added support for specifying PHY
addresses, but it did not provide support for linking the second PHY on
a given MDIO bus to the other Ethernet interface.
To be able to support two PHY instances on a single MDIO bus, two properties
are needed: First, there needs to be a flag indicating if the MDIO bus on
a given Ethernet interface is connected. If not, attempts to read from this
bus must always return 0xffff. Implement this property as phy-connected.
Second, if the MDIO bus on an interface is active, it needs a link to the
consumer interface to be able to provide PHY access for it. Implement this
property as phy-consumer.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20230315145248.1639364-2-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a test case for the TPM TIS I2C device exercising most of its
functionality, including localities.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Ninad Palsule<ninad@linux.ibm.com>
Message-Id: <20230331173051.3857801-4-stefanb@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
To be able to remove tpm_tis_base_addr from test cases that do not really
need it move the tpm_util_tis_transmit() function into tpm-tis-utils.c and
rename it to tpm_tis_transmit().
Fix a locality parameter in a test case on the way.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230331173051.3857801-3-stefanb@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add read and write functions for accessing registers of I2C devices
connected to the Aspeed I2C controller.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Message-Id: <20230331173051.3857801-2-stefanb@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230419163457.17175-1-quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The "optarg" parameter is completely unused, so let's drop it.
Message-Id: <20230419124831.678079-1-thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is nothing that depends on target specific macros in this
file, so we can move it to the common source set to avoid that
we have to compile this file multiple times (one time for each
target).
Message-Id: <20230413182636.139356-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
dirtylimit.c just uses one TARGET_PAGE_SIZE macro - change it to
qemu_target_page_size() so we can move thefile into the target
independent source set. Then we only have to compile this file
once during the build instead of multiple times (one time for
each target).
Message-Id: <20230413054509.54421-1-thuth@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The target checks here are only during the initialization, so they
are not performance critical. We can switch these to runtime checks
to avoid that we have to compile this file multiple times during
the build, and make the code ready for an universal build one day.
Message-Id: <20230412163501.36770-1-thuth@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The code in this file is not performance critical, so we can use
the target independent endianess functions to only compile this
file once for all targets.
Message-Id: <20230411183418.1640500-4-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In some cases of target independent code, it would be useful to have access
to the functions that swap endianess in case it differs between guest and
host. Thus re-implement the tswapXX() functions in a new header that can be
included separately. The check whether the swapping is needed continues to
be done at compile-time for target specific code, while it is done at
run-time in target-independent code.
Message-Id: <20230411183418.1640500-3-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Ideally, qtest.c should be independent from target specific code, so
we only have to compile it once for all targets. Thus start improving
the situation by moving the pseries related code to hw/ppc/spapr_rtas.c
instead and allow target code to register a callback handler for such
target specific commands.
Message-Id: <20230411183418.1640500-2-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The code for these two devices seems to be independent from any
target specific macros. "riscv_htif.c" is used for both, riscv32 and
riscv64, so by moving this to the common code source set, we can
avoid to compile it twice every time.
"goldfish_tty.c" is only used for one target at the moment, but
since it is a paravirtualized device, it could get useful for other
targets one day, so let's move it now, too.
Message-Id: <20230411173206.1511621-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We want to get rid of the "#ifdef TARGET_X86_64" compile-time switch
in the long run, so we can drop the separate compilation of the
"qemu-system-i386" binary one day - but we then still need a way to
run a guest with max. CPU settings in 32-bit mode. So the "max" CPU
should determine its family/model/stepping settings according to the
"large mode" (LM) CPU feature bit during runtime, so that it is
possible to run "qemu-system-x86_64 -cpu max,lm=off" and still get
a sane family/model/stepping setting for the guest CPU.
To be able to check the LM bit, we have to move the code that sets
up these properties to a "realize" function, since the LM setting is
not available yet when the "instance_init" function is being called.
Message-Id: <20230306154311.476458-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230412142001.16501-3-quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since commit fd8171fe52b5e("target/hexagon: import lexer for idef-parser") the
hexagon target uses 'flex', 'bison' to generate idef-parser. However default
travis builder image for 'focal' may not have these pre-installed, consequently
following error is seen with travis when trying to execute the 'GCC (user)' job
that also tries to build hexagon user binary:
<snip>
export CONFIG="--disable-containers --disable-system"
<snip>
Program flex found: NO
../target/hexagon/meson.build:179:4: ERROR: Program 'flex' not found or not
executable
<snip>
Fix this by explicitly add 'flex' and 'bison' to the list of addon apt-packages
for the 'GCC (user)' job.
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Message-Id: <20230417162354.186678-1-vaibhav@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
So that we can avoid the "older gdb crashes" problem described in
commit 5787d17a42 and which caused us to disable reporting pauth
information via the gdbstub, newer gdb is going to implement support
for recognizing the pauth information via a new feature name:
org.gnu.gdb.aarch64.pauth_v2
Older gdb won't recognize this feature name, so we can re-enable the
pauth support under the new name without risking them crashing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230406150827.3322670-1-peter.maydell@linaro.org
In rST markup syntax, the inline markup (*italics*, **bold** and
``monospaced``) must be separated from the surrending text by
non-word characters, otherwise it is not interpreted as markup.
To force interpretation as markup in the middle of a word,
you need to use a backslash-escaped space (which will not
appear as a space in the output).
Fix a missing backslash-space in this file, which meant that the ``
after "select" was output literally and the monospacing was
incorrectly extended all the way to the end of the next monospaced
word.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230411105424.3994585-1-peter.maydell@linaro.org
FEAT_PAN3 adds an EPAN bit to SCTLR_EL1 and SCTLR_EL2, which allows
the PAN bit to make memory non-privileged-read/write if it is
user-executable as well as if it is user-read/write.
Implement this feature and enable it in the AArch64 'max' CPU.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230331145045.2584941-4-peter.maydell@linaro.org
The syndrome value reported to ESR_EL2 should only contain the
detailed instruction syndrome information when the fault has been
caused by a stage 2 abort, not when the fault was a stage 1 abort
(i.e. caused by execution at EL2). We were getting this wrong and
reporting the detailed ISV information all the time.
Fix the bug by checking fi->stage2. Add a TODO comment noting the
cases where we'll have to come back and revisit this when we
implement FEAT_LS64 and friends.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230331145045.2584941-3-peter.maydell@linaro.org
We already pass merge_syn_data_abort() two fields from the
ARMMMUFaultInfo struct, and we're about to want to use a third field.
Refactor to just pass a pointer to the fault info.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230331145045.2584941-2-peter.maydell@linaro.org
kvm_arm_init_debug() used to be called several times on a SMP system as
kvm_arch_init_vcpu() calls it. Move the call to kvm_arch_init() to make
sure it will be called only once; otherwise it will overwrite pointers
to memory allocated with the previous call and leak it.
Fixes: e4482ab7e3 ("target-arm: kvm - add support for HW assisted debug")
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20230405153644.25300-1-akihiko.odaki@daynix.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Cortex-A7 core is only available when TCG is enabled (see
commit 80485d88f9 "target/arm: Restrict v7A TCG cpus to TCG accel").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230405100848.76145-3-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix the limit check. If the limit is less than the compare value,
the timer can never reach this value, thus it will never fire.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1491
Signed-off-by: Axel Heider <axel.heider@hensoldt.net>
Message-id: 168070611775.20412.2883242077302841473-2@git.sr.ht
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix issue reported by Coverity.
Signed-off-by: Axel Heider <axel.heider@hensoldt.net>
Message-id: 168070611775.20412.2883242077302841473-1@git.sr.ht
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cubieboard tests end with comment "reboot not functioning; omit test".
Fix this so reboot is done at the end of each test.
Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20230326202256.22980-5-strahinja.p.jankovic@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
