While 197 is very much a qcow2 test, and it looks like the partial
cluster case at the end (introduced in b0ddcbbb36) is specifically
a qcow2 case, the whole test scripts actually marks itself to work with
generic formats (and generic protocols, even).
Said partial cluster case happened to work with non-qcow2 formats as
well (mostly by accident), but 1855536256 broke that, because it sets
the compat option, which does not work for non-qcow2 formats.
So go the whole way and force IMGFMT=qcow2 and IMGPROTO=file, as done in
other places in this test.
Fixes: 1855536256
("iotests/197: Fix for compat=0.10")
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200728131134.902519-1-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
A quick run of './check -qcow2 -g migration' shows that test 169 is
NOT quick, but meanwhile several other tests ARE quick. Let's adjust
the test designations accordingly.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200727195117.132151-1-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Previous patches fixes behavior of bitmaps migration, so that errors
are handled by just removing unfinished bitmaps, and not fail or try to
recover postcopy migration. Add corresponding test.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Tested-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200727194236.19551-22-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Previous patches fixed two crashes which may occur on shutdown prior to
bitmaps postcopy finished. Check that it works now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Tested-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200727194236.19551-21-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Check that persistent bitmaps are not stored on source and that bitmaps
are persistent on destination.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Message-Id: <20200727194236.19551-20-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Move future common part to start_postcopy() method. Move checking
number of bitmaps to check_bitmap().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Message-Id: <20200727194236.19551-19-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The test wants to force a bitmap postcopy. Still, the resulting
postcopy period is very small. Let's increase it by adding more
bitmaps to migrate. Also, test disabled bitmaps migration.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Tested-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200727194236.19551-7-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
iotest 199 works too long because of many discard operations. At the
same time, postcopy period is very short, in spite of all these
efforts.
So, let's use less discards (and with more interesting patterns) to
reduce test timing. In the next commit we'll increase postcopy period.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Tested-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200727194236.19551-6-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Discard dirties dirty-bitmap as well as write, but works faster. Let's
use it instead.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Tested-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200727194236.19551-5-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The test aims to test _postcopy_ migration, and wants to do some write
operations during postcopy time.
Test considers migrate status=complete event on source as start of
postcopy. This is completely wrong, completion is completion of the
whole migration process. Let's instead consider destination start as
start of postcopy, and use RESUME event for it.
Next, as migration finish, let's use migration status=complete event on
target, as such method is closer to what libvirt or another user will
do, than tracking number of dirty-bitmaps.
Finally, add a possibility to dump events for debug. And if
set debug to True, we see, that actual postcopy period is very small
relatively to the whole test duration time (~0.2 seconds to >40 seconds
for me). This means, that test is very inefficient in what it supposed
to do. Let's improve it in following commits.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Tested-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200727194236.19551-4-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We don't need any specific format constraints here. Still keep qcow2
for two reasons:
1. No extra calls of format-unrelated test
2. Add some check around persistent bitmap in future (require qcow2)
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Tested-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200727194236.19551-3-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Writing zeroes to a qcow2 v2 images without a backing file results in an
unallocated cluster as of 61b3043965. 197 has a test for COR-ing a
cluster on an image without a backing file, which means that the data
will be zero, so now on a v2 image that cluster will just stay
unallocated, and so the test fails. Just force compat=1.1 for that
particular case to enforce the cluster to get allocated.
Fixes: 61b3043965
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200727135237.1096841-1-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If you are building only with either the new rx-softmmu or avr-softmmu
target, "make check-block" fails a couple of tests since there is no
default machine defined in these new targets. We have to select a machine
in the "check" script for these, just like we already do for the arm- and
tricore-softmmu targets.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200722161908.25383-1-thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We are adding the shutdown timeout to solve an issue
we now see where the aarch64 VMs timeout on shutdown
under TCG.
There is a new 3 second timeout in machine.py,
which we override in basevm.py when shutting down.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200717203041.9867-4-robert.foley@linaro.org>
Message-Id: <20200724064509.331-17-alex.bennee@linaro.org>
For installing stuff from sid or ports you may need to manually
specify the location of the keyring. You can even import keys into
your personal keyring and point it there, e.g.:
gpg --keyserver keyring.debian.org --recv-keys 84C573CD4E1AFD6C
make docker-binfmt-image-debian-sid-hppa DEB_TYPE=sid DEB_ARCH=hppa \
DEB_URL=http://ftp.ports.debian.org/debian-ports/ \
EXECUTABLE=./hppa-linux-user/qemu-hppa V=1 \
DEB_KEYRING=${HOME}/.gnupg/pubring.kbx
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200724064509.331-12-alex.bennee@linaro.org>
When we updated the arguments for docker.py we missed a bit.
Fixes: dfae628459 ("docker.py/build: support -t and -f arguments")
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200724064509.331-11-alex.bennee@linaro.org>
Does this seem convoluted to you? It feels a little complicated to me.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200724064509.331-10-alex.bennee@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200721135520.72355-3-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
- Let LUKS images only be shared between VMs if the guest device was
configured to allow that
- Fix abort() from bdrv_aio_cancel() for guest devices without a BDS
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEkb62CjDbPohX0Rgp9AfbAGHVz0AFAl8W1cUSHG1yZWl0ekBy
ZWRoYXQuY29tAAoJEPQH2wBh1c9AA7wH/1ckTrSDMroVi1adBrz+KycA3O9kSmzl
Z4qvLEdj/j7oc3ud96faCguPBv36ogjq/Wu7wl2/5ufNCVtr39LQLi7LeUiuzcuM
mZaov8BaFPWcVnEyqJKES/VfOB4AbT2LfFhqC+L2VGShsxFDTVOAno6R87Onkkuy
87qN9gs2b77pyhUQxvgKJzfvjDy0YRDyYn30eBo/WisEjfDfLrf2Fv/wpZze0OC8
9cqEvczTU2nQzX5k2NnANbf8Vr/U6H3tay/f/C3FZ0lWHcqWEieIKlWp4iYezsTk
B/LKDMWtvPgrZGxmsHrwOs9Y1Tfre3w86PrLXAC44WpX6OghhXKNKrQ=
=BV7d
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2020-07-21' into staging
Block patches for 5.1:
- Let LUKS images only be shared between VMs if the guest device was
configured to allow that
- Fix abort() from bdrv_aio_cancel() for guest devices without a BDS
# gpg: Signature made Tue 21 Jul 2020 12:47:17 BST
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/maxreitz/tags/pull-block-2020-07-21:
block: fix bdrv_aio_cancel() for ENOMEDIUM requests
qemu-iotests: add testcase for bz #1857490
block/crypto: disallow write sharing by default
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Test that we can't write-share raw luks images by default,
but we still can with share-rw=on
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200719122059.59843-3-mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We freed the string containing the final datadir path, but did not free
the path to the executable's directory that we get from
g_path_get_dirname(). Fix that.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200717163523.1591-1-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
- file-posix: Fix read-only Linux block devices with auto-read-only
- Require aligned image size with O_DIRECT to avoid assertion failure
- Allow byte-aligned direct I/O on NFS instead of guessing 4k alignment
- Fix nbd_export_close_all() crash
- Fix race in iotests case 030
- qemu-img resize: Require --shrink for shrinking all image formats
- crypto: use a stronger private key for tests
- Remove VXHS block device
- MAINTAINERS: vvfat: set status to odd fixes
-----BEGIN PGP SIGNATURE-----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=ijIG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- file-posix: Fix read-only Linux block devices with auto-read-only
- Require aligned image size with O_DIRECT to avoid assertion failure
- Allow byte-aligned direct I/O on NFS instead of guessing 4k alignment
- Fix nbd_export_close_all() crash
- Fix race in iotests case 030
- qemu-img resize: Require --shrink for shrinking all image formats
- crypto: use a stronger private key for tests
- Remove VXHS block device
- MAINTAINERS: vvfat: set status to odd fixes
# gpg: Signature made Fri 17 Jul 2020 13:31:18 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
file-posix: Fix leaked fd in raw_open_common() error path
file-posix: Fix check_hdev_writable() with auto-read-only
file-posix: Move check_hdev_writable() up
file-posix: Allow byte-aligned O_DIRECT with NFS
block: Require aligned image size to avoid assertion failure
iotests: test shutdown when bitmap is exported through NBD
nbd: make nbd_export_close_all() synchronous
iotests/030: Reduce job speed to make race less likely
crypto: use a stronger private key for tests
qemu-img resize: Require --shrink for shrinking all image formats
Remove VXHS block device
vvfat: set status to odd fixes
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Test shutdown when bitmap is exported through NBD and active client
exists. The previous patch fixes a crash, provoked by this scenario.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200714162234.13113-3-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It can happen that the throttling of the stream job doesn't make it slow
enough that we can be sure that it still exists when it is referenced
again. Just use a much smaller speed to make this very unlikely to
happen again.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200716132829.20127-1-kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The unit tests using the x509 crypto functionality have started
failing in Fedora 33 rawhide with a message like
The certificate uses an insecure algorithm
This is result of Fedora changes to support strong crypto [1]. RSA
with 1024 bit key is viewed as legacy and thus insecure. Generate
a new private key which is 3072 bits long and reasonable future
proof.
[1] https://fedoraproject.org/wiki/Changes/StrongCryptoSettings2
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200715154701.1041325-1-berrange@redhat.com>
Reviewed-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The vxhs code doesn't compile since v2.12.0. There's no point in fixing
and then adding CI for a config that our users have demonstrated that
they do not use; better to just remove it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200711065926.2204721-1-marcandre.lureau@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In the initial FuzzTarget, get_init_cmdline returned a char *. With this
API, we had no guarantee about where the string came from. For example,
i440fx-qtest-reboot-fuzz simply returned a pointer to a string literal,
while the QOS-based targets build the arguments out in a GString an
return the gchar *str pointer. Since we did not try to free the cmdline,
we have a leak for any targets that do not simply return string
literals. Clean up this mess by forcing fuzz-targets to return
a GString, that we can free.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200714174616.20709-1-alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Properly free each test response to avoid memory leak and separate
qtest_qmp() calls with spare lines, in a consistent manner.
Fixes: 5b88849e7b9("tests/qmp-cmd-test: Add qmp/object-add-failure-modes")
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20200715154117.15456-1-liq3ea@163.com>
Fixes: 9fc719b869 ("tests/qmp-cmd-test: Add qmp/object-add-duplicate-id")
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The TPM 2 code in libtpms was fixed to handle the PCR 'TCB group' according
to the PCClient profile. The change of the PCRs belonging to the 'TCB group'
now affects the pcrUpdateCounter in the TPM2_PCRRead() responses where its
value is now different (typically lower by '1') than what it was before. To
not fail the tests, we skip the comparison of the 14th byte, which
represents the pcrUpdateCounter.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200707201625.4177419-3-stefanb@linux.vnet.ibm.com
- minor documentation nit
- docker.py bootstrap fixes
- tweak containers.yml wildcards
- fix float16 nan detection
- conditional use of -Wpsabi
- fix missing iotlb data for plugins
- proper locking for helper based bb count
- drop ppc64abi32 from the plugin check-tcg test
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl8O4XwACgkQ+9DbCVqe
KkQacQgAhAFT5KszapViBuKR78KacFWmGbeOYvwwxW/YMmtAJmABaxS6E2mJxUgw
8Bgc8nHiQ1V3M4EBzOKT+AEdCGoHYAHnpDnuYQ1M9b82Zf5Tmkg9pBL5TvucQ20w
M7X1Z3UJtau1sMhH+k3Nc3OhZg4dqiOMWven7kefXjA+13kuu/40+hI/bohw58L9
OAWae2PUevxR2S01q5n6w4frUCnI+IPZoGLQZjSCbcakZqsuCFrc/Z20cfOIQM76
pe0Rm8VRHQ9XCuPGvZ9OOaCJQ7QF22MHMZmxNnlWJ4+zzsP32RjO273XknfFOmBN
Af5eTZ8lKLBOxywXTXQ/ehSHf7FQ9Q==
=rQef
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-misc-for-rc0-150720-3' into staging
Final fixes for 5.1-rc0
- minor documentation nit
- docker.py bootstrap fixes
- tweak containers.yml wildcards
- fix float16 nan detection
- conditional use of -Wpsabi
- fix missing iotlb data for plugins
- proper locking for helper based bb count
- drop ppc64abi32 from the plugin check-tcg test
# gpg: Signature made Wed 15 Jul 2020 11:59:08 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-misc-for-rc0-150720-3:
.travis.yml: skip ppc64abi32-linux-user with plugins
plugins: expand the bb plugin to be thread safe and track per-cpu
cputlb: ensure we save the IOTLB data in case of reset
tests/plugins: don't unconditionally add -Wpsabi
fpu/softfloat: fix up float16 nan recognition
gitlab-ci/containers: Add missing wildcard where we should look for changes
docker.py: fix fetching of FROM layers
tests/docker: Remove the libssh workaround from the ubuntu 20.04 image
docs/devel: fix grammar in multi-thread-tcg
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Reduce race conditions on QEMUMachine::shutdown()
1. Remove the "bare except" pattern in the existing shutdown code,
which can mask problems and make debugging difficult.
2. Ensure that post-shutdown cleanup is always performed, even when
graceful termination fails.
3. Unify cleanup paths such that no matter how the VM is terminated,
the same functions and steps are always taken to reset the object
state.
4. Rewrite shutdown() such that any error encountered when attempting
a graceful shutdown will be raised as an AbnormalShutdown exception.
The pythonic idiom is to allow the caller to decide if this is a
problem or not.
- Modify part of the python/qemu library to comply with:
. mypy --strict
. pylint
. flake8
- Script for the TCG Continuous Benchmarking project that uses
callgrind to dissect QEMU execution into three main phases:
. code generation
. JIT execution
. helpers execution
CI jobs results:
. https://cirrus-ci.com/build/5421349961203712
. https://gitlab.com/philmd/qemu/-/pipelines/166556001
. https://travis-ci.org/github/philmd/qemu/builds/708102347
-----BEGIN PGP SIGNATURE-----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=Jp6n
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd-gitlab/tags/python-next-20200714' into staging
Python patches for 5.1
- Reduce race conditions on QEMUMachine::shutdown()
1. Remove the "bare except" pattern in the existing shutdown code,
which can mask problems and make debugging difficult.
2. Ensure that post-shutdown cleanup is always performed, even when
graceful termination fails.
3. Unify cleanup paths such that no matter how the VM is terminated,
the same functions and steps are always taken to reset the object
state.
4. Rewrite shutdown() such that any error encountered when attempting
a graceful shutdown will be raised as an AbnormalShutdown exception.
The pythonic idiom is to allow the caller to decide if this is a
problem or not.
- Modify part of the python/qemu library to comply with:
. mypy --strict
. pylint
. flake8
- Script for the TCG Continuous Benchmarking project that uses
callgrind to dissect QEMU execution into three main phases:
. code generation
. JIT execution
. helpers execution
CI jobs results:
. https://cirrus-ci.com/build/5421349961203712
. https://gitlab.com/philmd/qemu/-/pipelines/166556001
. https://travis-ci.org/github/philmd/qemu/builds/708102347
# gpg: Signature made Tue 14 Jul 2020 21:40:05 BST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd-gitlab/tags/python-next-20200714:
python/qmp.py: add QMPProtocolError
python/qmp.py: add casts to JSON deserialization
python/qmp.py: Do not return None from cmd_obj
python/qmp.py: re-absorb MonitorResponseError
iotests.py: use qemu.qmp type aliases
python/qmp.py: Define common types
python/machine.py: change default wait timeout to 3 seconds
python/machine.py: re-add sigkill warning suppression
python/machine.py: split shutdown into hard and soft flavors
tests/acceptance: Don't test reboot on cubieboard
tests/acceptance: wait() instead of shutdown() where appropriate
python/machine.py: Make wait() call shutdown()
python/machine.py: Add a configurable timeout to shutdown()
python/machine.py: Prohibit multiple shutdown() calls
python/machine.py: Perform early cleanup for wait() calls, too
python/machine.py: Add _early_cleanup hook
python/machine.py: Close QMP socket in cleanup
python/machine.py: consolidate _post_shutdown()
scripts/performance: Add dissect.py script
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While there isn't any easy way to make the inline counts thread safe
we can ensure the callback based ones are. While we are at it we can
reduce introduce a new option ("idle") to dump a report of the current
bb and insn count each time a vCPU enters the idle state.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Cc: Dave Bort <dbort@dbort.com>
Message-Id: <20200713200415.26214-8-alex.bennee@linaro.org>
Not all compilers support the -Wpsabi (clang-9 in my case). To handle
this gracefully we pare back the shared build machinery so the
Makefile is relatively "standalone". We still take advantage of
config-host.mak as configure has done a bunch of probing for us but
that is it.
Fixes: bac8d222a
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200713200415.26214-6-alex.bennee@linaro.org>
This worked on a system that was already bootstrapped because the
stage 2 images already existed even if they wouldn't be used. What we
should have pulled down was the FROM line containers first because
building on gitlab doesn't have the advantage of using our build
system to build the pre-requisite bits.
We still pull the image we want to build just in case we can use the
cached data.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200713200415.26214-4-alex.bennee@linaro.org>
The libssh problem only exists in Ubuntu 18.04 - we can enable it
in 20.04 again.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200713185237.9419-1-thuth@redhat.com>
Message-Id: <20200713200415.26214-3-alex.bennee@linaro.org>
By using invalidated address, guest can do out-of-bounds accesses.
These patches fix the issue by only allowing SD card image sizes
power of 2, and not switching to SEND_DATA state when the address
is invalid (out of range).
This issue was found using QEMU fuzzing mode (using --enable-fuzzing,
see docs/devel/fuzzing.txt) and reported by Alexander Bulekov.
Reproducer:
https://bugs.launchpad.net/qemu/+bug/1880822/comments/1
CI jobs results:
. https://cirrus-ci.com/build/5157142548185088
. https://gitlab.com/philmd/qemu/-/pipelines/166381731
. https://travis-ci.org/github/philmd/qemu/builds/707956535
-----BEGIN PGP SIGNATURE-----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=VZsF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd-gitlab/tags/sdcard-CVE-2020-13253-pull-request' into staging
Fix CVE-2020-13253
By using invalidated address, guest can do out-of-bounds accesses.
These patches fix the issue by only allowing SD card image sizes
power of 2, and not switching to SEND_DATA state when the address
is invalid (out of range).
This issue was found using QEMU fuzzing mode (using --enable-fuzzing,
see docs/devel/fuzzing.txt) and reported by Alexander Bulekov.
Reproducer:
https://bugs.launchpad.net/qemu/+bug/1880822/comments/1
CI jobs results:
. https://cirrus-ci.com/build/5157142548185088
. https://gitlab.com/philmd/qemu/-/pipelines/166381731
. https://travis-ci.org/github/philmd/qemu/builds/707956535
# gpg: Signature made Tue 14 Jul 2020 14:54:44 BST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd-gitlab/tags/sdcard-CVE-2020-13253-pull-request:
hw/sd/sdcard: Do not switch to ReceivingData if address is invalid
hw/sd/sdcard: Update coding style to make checkpatch.pl happy
hw/sd/sdcard: Do not allow invalid SD card sizes
hw/sd/sdcard: Simplify realize() a bit
hw/sd/sdcard: Restrict Class 6 commands to SCSD cards
tests/acceptance/boot_linux: Expand SD card image to power of 2
tests/acceptance/boot_linux: Tag tests using a SD card with 'device:sd'
docs/orangepi: Add instructions for resizing SD image to power of two
MAINTAINERS: Cc qemu-block mailing list
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
iotests.py should use the type definitions from qmp.py instead of its
own.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200710052220.3306-3-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
cubieboard does not have a functioning reboot, it halts and QEMU does
not exit.
vm.shutdown() is modified in a forthcoming patch that makes it less tolerant
of race conditions on shutdown; tests should consciously decide to WAIT
or to SHUTDOWN qemu.
So long as this test is attempting to reboot, the correct choice would
be to WAIT for the VM to exit. However, since that's broken, we should
SHUTDOWN instead.
SHUTDOWN is indeed what already happens when the test performs teardown,
however, if anyone fixes cubieboard reboot in the future, this test will
develop a new race condition that might be hard to debug.
Therefore: remove the reboot test and make it obvious that the VM is
still running when the test concludes, where the test teardown will do
the right thing.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20200710050649.32434-10-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
When issuing 'reboot' to a VM with the no-reboot option, that VM will
exit. When then issuing a shutdown command, the cleanup may race.
Add calls to vm.wait() which will gracefully mark the VM as having
exited. Subsequent vm.shutdown() calls in generic tearDown code will not
race when called after completion of the call.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20200710050649.32434-9-jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
- file-posix: Mitigate file fragmentation with extent size hints
- Tighten qemu-img rules on missing backing format
- qemu-img map: Don't limit block status request size
- Fix crash with virtio-scsi and iothreads
-----BEGIN PGP SIGNATURE-----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=DB0q
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- file-posix: Mitigate file fragmentation with extent size hints
- Tighten qemu-img rules on missing backing format
- qemu-img map: Don't limit block status request size
- Fix crash with virtio-scsi and iothreads
# gpg: Signature made Tue 14 Jul 2020 14:24:19 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
block: Avoid stale pointer dereference in blk_get_aio_context()
qemu-img: Deprecate use of -b without -F
block: Add support to warn on backing file change without format
iotests: Specify explicit backing format where sensible
qcow2: Deprecate use of qemu-img amend to change backing file
block: Error if backing file fails during creation without -u
qcow: Tolerate backing_fmt=
vmdk: Add trivial backing_fmt support
sheepdog: Add trivial backing_fmt support
block: Finish deprecation of 'qemu-img convert -n -o'
qemu-img: Flush stdout before before potential stderr messages
file-posix: Mitigate file fragmentation with extent size hints
iotests/059: Filter out disk size with more standard filter
qemu-img map: Don't limit block status request size
iotests: Simplify _filter_img_create() a bit
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In few commits we won't allow SD card images with invalid size
(not aligned to a power of 2). Prepare the tests: add the
pow2ceil() and image_pow2ceil_expand() methods and resize the
images (expanding) of the tests using SD cards.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20200713183209.26308-5-f4bug@amsat.org>
Avocado tags are handy to automatically select tests matching
the tags. Since these tests use a SD card, tag them.
We can run all the tests using a SD card at once with:
$ avocado --show=app run -t u-boot tests/acceptance/
$ AVOCADO_ALLOW_LARGE_STORAGE=ok \
avocado --show=app \
run -t device:sd tests/acceptance/
Fetching asset from tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_orangepi_sd
Fetching asset from tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_orangepi_bionic
Fetching asset from tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_orangepi_uboot_netbsd9
(1/3) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_orangepi_sd: PASS (19.56 s)
(2/3) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_orangepi_bionic: PASS (49.97 s)
(3/3) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_orangepi_uboot_netbsd9: PASS (20.06 s)
RESULTS : PASS 3 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
JOB TIME : 90.02 s
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20200713183209.26308-4-f4bug@amsat.org>
Creating an image that requires format probing of the backing image is
potentially unsafe (we've had several CVEs over the years based on
probes leaking information to the guest on a subsequent boot, although
these days tools like libvirt are aware of the issue enough to prevent
the worst effects). For example, if our probing algorithm ever
changes, or if other tools like libvirt determine a different probe
result than we do, then subsequent use of that backing file under a
different format will present corrupted data to the guest.
Fortunately, the worst effects occur only when the backing image is
originally raw, and we at least prevent commit into a probed raw
backing file that would change its probed type.
Still, it is worth starting a deprecation clock so that future
qemu-img can refuse to create backing chains that would rely on
probing, to encourage clients to avoid unsafe practices. Most
warnings are intentionally emitted from bdrv_img_create() in the block
layer, but qemu-img convert uses bdrv_create() which cannot emit its
own warning without causing spurious warnings on other code paths. In
the end, all command-line image creation or backing file rewriting now
performs a check.
Furthermore, if we probe a backing file as non-raw, then it is safe to
explicitly record that result (rather than relying on future probes);
only where we probe a raw image do we care about further warnings to
the user when using such an image (for example, commits into a
probed-raw backing file are prevented), to help them improve their
tooling. But whether or not we make the probe results explicit, we
still warn the user to remind them to upgrade their workflow to supply
-F always.
iotest 114 specifically wants to create an unsafe image for later
amendment rather than defaulting to our new default of recording a
probed format, so it needs an update. While touching it, expand it to
cover all of the various warnings enabled by this patch. iotest 301
also shows a change to qcow messages.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200706203954.341758-11-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are many existing qcow2 images that specify a backing file but
no format. This has been the source of CVEs in the past, but has
become more prominent of a problem now that libvirt has switched to
-blockdev. With older -drive, at least the probing was always done by
qemu (so the only risk of a changed format between successive boots of
a guest was if qemu was upgraded and probed differently). But with
newer -blockdev, libvirt must specify a format; if libvirt guesses raw
where the image was formatted, this results in data corruption visible
to the guest; conversely, if libvirt guesses qcow2 where qemu was
using raw, this can result in potential security holes, so modern
libvirt instead refuses to use images without explicit backing format.
The change in libvirt to reject images without explicit backing format
has pointed out that a number of tools have been far too reliant on
probing in the past. It's time to set a better example in our own
iotests of properly setting this parameter.
iotest calls to create, rebase, and convert are all impacted to some
degree. It's a bit annoying that we are inconsistent on command line
- while all of those accept -o backing_file=...,backing_fmt=..., the
shortcuts are different: create and rebase have -b and -F, while
convert has -B but no -F. (amend has no shortcuts, but the previous
patch just deprecated the use of amend to change backing chains).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200706203954.341758-9-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The use of 'qemu-img amend' to change qcow2 backing files is not
tested very well. In particular, our implementation has a bug where
if a new backing file is provided without a format, then the prior
format is blindly reused, even if this results in data corruption, but
this is not caught by iotests.
There are also situations where amending other options needs access to
the original backing file (for example, on a downgrade to a v2 image,
knowing whether a v3 zero cluster must be allocated or may be left
unallocated depends on knowing whether the backing file already reads
as zero), but the command line does not have a nice way to tell us
both the backing file to use for opening the image as well as the
backing file to install after the operation is complete.
Even if we do allow changing the backing file, it is redundant with
the existing ability to change backing files via 'qemu-img rebase -u'.
It is time to deprecate this support (leaving the existing behavior
intact, even if it is buggy), and at a point in the future, require
the use of only 'qemu-img rebase' for adjusting backing chain
relations, saving 'qemu-img amend' for changes unrelated to the
backing chain.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200706203954.341758-8-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Back in commit 6e6e55f5 (Jul 2017, v2.10), we tweaked the code to warn
if the backing file could not be opened but the user gave a size,
unless the user also passes the -u option to bypass the open of the
backing file. As one common reason for failure to open the backing
file is when there is mismatch in the requested backing format in
relation to what the backing file actually contains, we actually want
to open the backing file and ensure that it has the right format in as
many cases as possible. iotest 301 for qcow demonstrates how
detecting explicit format mismatch is useful to prevent the creation
of an image that would probe differently than the user requested. Now
is the time to finally turn the warning an error, as promised.
Note that the original warning was added prior to our documentation of
an official deprecation policy (eb22aeca, also Jul 2017), and because
the warning didn't mention the word "deprecated", we never actually
remembered to document it as such. But the warning has been around
long enough that I don't see prolonging it another two releases.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200706203954.341758-7-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qcow has no space in the metadata to store a backing format, and there
are existing qcow images backed both by raw or by other formats
(usually qcow) images, reliant on probing to tell the difference. On
the bright side, because we probe every time, raw files are marked as
probed and we thus forbid a commit action into the backing file where
guest-controlled contents could change the result of the probe next
time around (the iotest added here proves that).
Still, allowing the user to specify the backing format during
creation, even if we can't record it, is a good thing. This patch
blindly allows any value that resolves to a known driver, even if the
user's request is a mismatch from what probing finds; then the next
patch will further enhance things to verify that the user's request
matches what we actually probe. With this and the next patch in
place, we will finally be ready to deprecate the creation of images
where a backing format was not explicitly specified by the user.
Note that this is only for QemuOpts usage; there is no change to the
QAPI to allow a format through -blockdev.
Add a new iotest 301 just for qcow, to demonstrate the latest
behavior, and to make it easier to show the improvements made in the
next patch.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200706203954.341758-6-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's been two releases since we started warning; time to make the
combination an error as promised. There was no iotest coverage, so
add some.
While touching the documentation, tweak another section heading for
consistent style.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200706203954.341758-3-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
During 'qemu-img create ... 2>&1', if --quiet is not in force, we can
end up with buffered I/O in stdout that was produced before failure,
but which appears in output after failure. This is confusing; the fix
is to flush stdout prior to attempting anything that might produce an
error message. Several iotests demonstrate the resulting ordering
change now that the merged outputs now reflect chronology. (An even
better fix would be to avoid printf from within block.c altogether,
but that's much more invasive...)
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200706203954.341758-2-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Especially when O_DIRECT is used with image files so that the page cache
indirection can't cause a merge of allocating requests, the file will
fragment on the file system layer, with a potentially very small
fragment size (this depends on the requests the guest sent).
On Linux, fragmentation can be reduced by setting an extent size hint
when creating the file (at least on XFS, it can't be set any more after
the first extent has been allocated), basically giving raw files a
"cluster size" for allocation.
This adds a create option to set the extent size hint, and changes the
default from not setting a hint to setting it to 1 MB. The main reason
why qcow2 defaults to smaller cluster sizes is that COW becomes more
expensive, which is not an issue with raw files, so we can choose a
larger size. The tradeoff here is only potentially wasted disk space.
For qcow2 (or other image formats) over file-posix, the advantage should
even be greater because they grow sequentially without leaving holes, so
there won't be wasted space. Setting even larger extent size hints for
such images may make sense. This can be done with the new option, but
let's keep the default conservative for now.
The effect is very visible with a test that intentionally creates a
badly fragmented file with qemu-img bench (the time difference while
creating the file is already remarkable) and then looks at the number of
extents and the time a simple "qemu-img map" takes.
Without an extent size hint:
$ ./qemu-img create -f raw -o extent_size_hint=0 ~/tmp/test.raw 10G
Formatting '/home/kwolf/tmp/test.raw', fmt=raw size=10737418240 extent_size_hint=0
$ ./qemu-img bench -f raw -t none -n -w ~/tmp/test.raw -c 1000000 -S 8192 -o 0
Sending 1000000 write requests, 4096 bytes each, 64 in parallel (starting at offset 0, step size 8192)
Run completed in 25.848 seconds.
$ ./qemu-img bench -f raw -t none -n -w ~/tmp/test.raw -c 1000000 -S 8192 -o 4096
Sending 1000000 write requests, 4096 bytes each, 64 in parallel (starting at offset 4096, step size 8192)
Run completed in 19.616 seconds.
$ filefrag ~/tmp/test.raw
/home/kwolf/tmp/test.raw: 2000000 extents found
$ time ./qemu-img map ~/tmp/test.raw
Offset Length Mapped to File
0 0x1e8480000 0 /home/kwolf/tmp/test.raw
real 0m1,279s
user 0m0,043s
sys 0m1,226s
With the new default extent size hint of 1 MB:
$ ./qemu-img create -f raw -o extent_size_hint=1M ~/tmp/test.raw 10G
Formatting '/home/kwolf/tmp/test.raw', fmt=raw size=10737418240 extent_size_hint=1048576
$ ./qemu-img bench -f raw -t none -n -w ~/tmp/test.raw -c 1000000 -S 8192 -o 0
Sending 1000000 write requests, 4096 bytes each, 64 in parallel (starting at offset 0, step size 8192)
Run completed in 11.833 seconds.
$ ./qemu-img bench -f raw -t none -n -w ~/tmp/test.raw -c 1000000 -S 8192 -o 4096
Sending 1000000 write requests, 4096 bytes each, 64 in parallel (starting at offset 4096, step size 8192)
Run completed in 10.155 seconds.
$ filefrag ~/tmp/test.raw
/home/kwolf/tmp/test.raw: 178 extents found
$ time ./qemu-img map ~/tmp/test.raw
Offset Length Mapped to File
0 0x1e8480000 0 /home/kwolf/tmp/test.raw
real 0m0,061s
user 0m0,040s
sys 0m0,014s
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200707142329.48303-1-kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The actual disk space used by an image can vary between filesystems and
depending on other settings like an extent size hint. Replace the one
call of "$QEMU_IMG info" and the associated one-off sed filter with the
more standard "_img_info" and the standard filter from common.filter.
Apart from turning "vmdk" into "IMGFMT" and changing the placeholder for
cid fields, this only removes the "disk size" line.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Not only is it a bit stupid to try to filter multi-line "Formatting"
output (because we only need it for a single test, which can easily be
amended to no longer need it), it is also problematic when there can be
output after a "Formatting" line that we do not want to filter as if it
were part of it.
So rename _filter_img_create to _do_filter_img_create, let it filter
only a single line, and let _filter_img_create loop over all input
lines, calling _do_filter_img_create only on those that match
/^Formatting/ (basically, what _filter_img_create_in_qmp did already).
(And fix 020 to work with that.)
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200709110205.310942-1-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200701105331.121670-5-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Make it simpler to debug when qemu-io fails due to wrong arguments or
environment.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200701105331.121670-3-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The only user (iotest 205) of QemuIoInteractive provides -f argument,
so it's a bit inefficient to use qemu_io_args, which contains -f too.
And we are going to add one more test, which wants to specify -f by
hand. Let's use qemu_io_args_no_fmt.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200701105331.121670-2-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
There should be a space between "forking" and "for".
Message-Id: <20200709083719.22221-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In 45222b9a90, I fixed a broken check for rcu_enable_atfork introduced
in d6919e4cb6. I added a call to rcu_enable_atfork after the
call to qemu_init in fuzz.c, but forgot to include the corresponding
header, breaking --enable-fuzzing --enable-werror builds.
Fixes: 45222b9a90 ("fuzz: fix broken qtest check at rcu_disable_atfork")
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200708200104.21978-3-alxndr@bu.edu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This test never required "chardev/char-mux.h", remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200423202112.644-3-philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
With a reconnect socket, qemu_char_open() will start a background
thread. It should keep a reference on the chardev.
Fixes invalid read:
READ of size 8 at 0x6040000ac858 thread T7
#0 0x5555598d37b8 in unix_connect_saddr /home/elmarco/src/qq/util/qemu-sockets.c:954
#1 0x5555598d4751 in socket_connect /home/elmarco/src/qq/util/qemu-sockets.c:1109
#2 0x555559707c34 in qio_channel_socket_connect_sync /home/elmarco/src/qq/io/channel-socket.c:145
#3 0x5555596adebb in tcp_chr_connect_client_task /home/elmarco/src/qq/chardev/char-socket.c:1104
#4 0x555559723d55 in qio_task_thread_worker /home/elmarco/src/qq/io/task.c:123
#5 0x5555598a6731 in qemu_thread_start /home/elmarco/src/qq/util/qemu-thread-posix.c:519
#6 0x7ffff40d4431 in start_thread (/lib64/libpthread.so.0+0x9431)
#7 0x7ffff40029d2 in __clone (/lib64/libc.so.6+0x1019d2)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200420112012.567284-1-marcandre.lureau@redhat.com>
When the disconnect event is triggered in the connecting stage,
the tcp_chr_disconnect_locked may be called twice.
The first call:
#0 qemu_chr_socket_restart_timer (chr=0x55555582ee90) at chardev/char-socket.c:120
#1 0x000055555558e38c in tcp_chr_disconnect_locked (chr=<optimized out>) at chardev/char-socket.c:490
#2 0x000055555558e3cd in tcp_chr_disconnect (chr=0x55555582ee90) at chardev/char-socket.c:497
#3 0x000055555558ea32 in tcp_chr_new_client (chr=chr@entry=0x55555582ee90, sioc=sioc@entry=0x55555582f0b0) at chardev/char-socket.c:892
#4 0x000055555558eeb8 in qemu_chr_socket_connected (task=0x55555582f300, opaque=<optimized out>) at chardev/char-socket.c:1090
#5 0x0000555555574352 in qio_task_complete (task=task@entry=0x55555582f300) at io/task.c:196
#6 0x00005555555745f4 in qio_task_thread_result (opaque=0x55555582f300) at io/task.c:111
#7 qio_task_wait_thread (task=0x55555582f300) at io/task.c:190
#8 0x000055555558f17e in tcp_chr_wait_connected (chr=0x55555582ee90, errp=0x555555802a08 <error_abort>) at chardev/char-socket.c:1013
#9 0x0000555555567cbd in char_socket_client_reconnect_test (opaque=0x5555557fe020 <client8unix>) at tests/test-char.c:1152
The second call:
#0 0x00007ffff5ac3277 in raise () from /lib64/libc.so.6
#1 0x00007ffff5ac4968 in abort () from /lib64/libc.so.6
#2 0x00007ffff5abc096 in __assert_fail_base () from /lib64/libc.so.6
#3 0x00007ffff5abc142 in __assert_fail () from /lib64/libc.so.6
#4 0x000055555558d10a in qemu_chr_socket_restart_timer (chr=0x55555582ee90) at chardev/char-socket.c:125
#5 0x000055555558df0c in tcp_chr_disconnect_locked (chr=<optimized out>) at chardev/char-socket.c:490
#6 0x000055555558df4d in tcp_chr_disconnect (chr=0x55555582ee90) at chardev/char-socket.c:497
#7 0x000055555558e5b2 in tcp_chr_new_client (chr=chr@entry=0x55555582ee90, sioc=sioc@entry=0x55555582f0b0) at chardev/char-socket.c:892
#8 0x000055555558e93a in tcp_chr_connect_client_sync (chr=chr@entry=0x55555582ee90, errp=errp@entry=0x7fffffffd178) at chardev/char-socket.c:944
#9 0x000055555558ec78 in tcp_chr_wait_connected (chr=0x55555582ee90, errp=0x555555802a08 <error_abort>) at chardev/char-socket.c:1035
#10 0x000055555556804b in char_socket_client_test (opaque=0x5555557fe020 <client8unix>) at tests/test-char.c:1023
Run test/test-char to reproduce this issue.
test-char: chardev/char-socket.c:125: qemu_chr_socket_restart_timer: Assertion `!s->reconnect_timer' failed.
Signed-off-by: Li Feng <fengli@smartx.com>
Acked-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200522025554.41063-1-fengli@smartx.com>
- tests/vm support for aarch64 VMs
- tests/tcg better cross-compiler detection
- update docker tooling to support registries
- update docker support for xtensa
- gitlab build docker images and store in registry
- gitlab use docker images for builds
- a number of skipIf updates to support move
- linux-user MAP_FIXED_NOREPLACE fix
- qht-bench compiler tweaks
- configure fix for secret keyring
- tsan fiber annotation clean-up
- doc updates for mttcg/icount/gdbstub
- fix cirrus to use brew bash for iotests
- revert virtio-gpu breakage
- fix LC_ALL to avoid sorting changes in iotests
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl8J0yoACgkQ+9DbCVqe
KkSzTAf/Vn+9TU8Qt7nZvl7W4tz7Sy5K8EJGwj2RXx6CWWWLiFbsXurIM8Krw5Vc
RmvUxwa359b+J0lQpfeNDHYm1nM8RZLFlkG0a5bl0I8sW0EcPjBRtwNaGKXh2p0u
u2RS2QAi6A9AvYT4ZREYlBM+o9WzbxCEQm4s8fr6WEJCQfxBnb5/bGiEjWR64e8C
j9Kvou+zAKfVizbQMtu+mwqjsoPtcS1b3vVcO7anhNuUsuaEKkS0dFWzWvw3lwJR
STIYnb8Y/eJ1yKr0hPH2qtWv3n6yhlYvYmpUCH6AwshGMUoeFEzR2VoWS6yZPGG6
na6XA3UW5R9AxIDfkCJ5ueeo8t9xMQ==
=HRWa
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-misc-110720-2' into staging
Testing and misc build updates:
- tests/vm support for aarch64 VMs
- tests/tcg better cross-compiler detection
- update docker tooling to support registries
- update docker support for xtensa
- gitlab build docker images and store in registry
- gitlab use docker images for builds
- a number of skipIf updates to support move
- linux-user MAP_FIXED_NOREPLACE fix
- qht-bench compiler tweaks
- configure fix for secret keyring
- tsan fiber annotation clean-up
- doc updates for mttcg/icount/gdbstub
- fix cirrus to use brew bash for iotests
- revert virtio-gpu breakage
- fix LC_ALL to avoid sorting changes in iotests
# gpg: Signature made Sat 11 Jul 2020 15:56:42 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-misc-110720-2: (50 commits)
iotests: Set LC_ALL=C for sort
Revert "vga: build virtio-gpu as module"
tests: fix "make check-qtest" for modular builds
.cirrus.yml: add bash to the brew packages
tests/docker: update toolchain set in debian-xtensa-cross
tests/docker: fall back more gracefully when pull fails
docs: Add to gdbstub documentation the PhyMemMode
docs/devel: add some notes on tcg-icount for developers
docs/devel: convert and update MTTCG design document
tests/qht-bench: Adjust threshold computation
tests/qht-bench: Adjust testing rate by -1
travis.yml: Test also the other targets on s390x
shippable: pull images from registry instead of building
testing: add check-build target
containers.yml: build with docker.py tooling
gitlab: limit re-builds of the containers
tests: improve performance of device-introspect-test
gitlab: add avocado asset caching
gitlab: enable check-tcg for linux-user tests
linux-user/elfload: use MAP_FIXED_NOREPLACE in pgb_reserved_va
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Michael started to work on the AVR port few years ago [*] and kept
improving the code over various series.
List of people who help him (in chronological order):
- Richard Henderson
- Sarah Harris and Edward Robbins
- Philippe Mathieu-Daudé and Aleksandar Markovic
- Pavel Dovgalyuk
- Thomas Huth
[*] The oldest contribution I could find on the list is from 2016:
https://lists.nongnu.org/archive/html/qemu-devel/2016-06/msg02985.html
Tests included:
$ avocado --show=app run -t arch:avr tests/acceptance/
Fetching asset from tests/acceptance/machine_avr6.py:AVR6Machine.test_freertos
(1/1) tests/acceptance/machine_avr6.py:AVR6Machine.test_freertos: PASS (2.13 s)
RESULTS : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
JOB TIME : 2.35 s
$ make check-qtest-avr
TEST check-qtest-avr: tests/qtest/boot-serial-test
TEST check-qtest-avr: tests/qtest/cdrom-test
TEST check-qtest-avr: tests/qtest/device-introspect-test
TEST check-qtest-avr: tests/qtest/machine-none-test
TEST check-qtest-avr: tests/qtest/qmp-test
TEST check-qtest-avr: tests/qtest/qmp-cmd-test
TEST check-qtest-avr: tests/qtest/qom-test
TEST check-qtest-avr: tests/qtest/test-hmp
TEST check-qtest-avr: tests/qtest/qos-test
CI results:
. https://cirrus-ci.com/build/5697049146425344
. https://gitlab.com/philmd/qemu/-/pipelines/165328058
. https://travis-ci.org/github/philmd/qemu/builds/705817933
. https://app.shippable.com/github/philmd/qemu/runs/822/summary/console
-----BEGIN PGP SIGNATURE-----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=gFE5
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd-gitlab/tags/avr-port-20200711' into staging
8bit AVR port from Michael Rolnik.
Michael started to work on the AVR port few years ago [*] and kept
improving the code over various series.
List of people who help him (in chronological order):
- Richard Henderson
- Sarah Harris and Edward Robbins
- Philippe Mathieu-Daudé and Aleksandar Markovic
- Pavel Dovgalyuk
- Thomas Huth
[*] The oldest contribution I could find on the list is from 2016:
https://lists.nongnu.org/archive/html/qemu-devel/2016-06/msg02985.html
Tests included:
$ avocado --show=app run -t arch:avr tests/acceptance/
Fetching asset from tests/acceptance/machine_avr6.py:AVR6Machine.test_freertos
(1/1) tests/acceptance/machine_avr6.py:AVR6Machine.test_freertos: PASS (2.13 s)
RESULTS : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
JOB TIME : 2.35 s
$ make check-qtest-avr
TEST check-qtest-avr: tests/qtest/boot-serial-test
TEST check-qtest-avr: tests/qtest/cdrom-test
TEST check-qtest-avr: tests/qtest/device-introspect-test
TEST check-qtest-avr: tests/qtest/machine-none-test
TEST check-qtest-avr: tests/qtest/qmp-test
TEST check-qtest-avr: tests/qtest/qmp-cmd-test
TEST check-qtest-avr: tests/qtest/qom-test
TEST check-qtest-avr: tests/qtest/test-hmp
TEST check-qtest-avr: tests/qtest/qos-test
CI results:
. https://cirrus-ci.com/build/5697049146425344
. https://gitlab.com/philmd/qemu/-/pipelines/165328058
. https://travis-ci.org/github/philmd/qemu/builds/705817933
. https://app.shippable.com/github/philmd/qemu/runs/822/summary/console
# gpg: Signature made Sat 11 Jul 2020 10:03:11 BST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd-gitlab/tags/avr-port-20200711: (32 commits)
target/avr/disas: Fix store instructions display order
target/avr/cpu: Fix $PC displayed address
target/avr/cpu: Drop tlb_flush() in avr_cpu_reset()
target/avr: Add section into QEMU documentation
tests/acceptance: Test the Arduino MEGA2560 board
tests/boot-serial: Test some Arduino boards (AVR based)
hw/avr: Add limited support for some Arduino boards
hw/avr: Add some ATmega microcontrollers
hw/avr: Add support for loading ELF/raw binaries
hw/misc: avr: Add limited support for power reduction device
hw/timer: avr: Add limited support for 16-bit timer peripheral
hw/char: avr: Add limited support for USART peripheral
tests/machine-none: Add AVR support
target/avr: Register AVR support with the rest of QEMU
target/avr: Add support for disassembling via option '-d in_asm'
target/avr: Initialize TCG register variables
target/avr: Add instruction translation - CPU main translation function
target/avr: Add instruction translation - MCU Control Instructions
target/avr: Add instruction translation - Bit and Bit-test Instructions
target/avr: Add instruction translation - Data Transfer Instructions
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Otherwise the result is basically unpredictable.
(Note that the precise environment variable to control sorting order is
LC_COLLATE, but LC_ALL overrides LC_COLLATE, and we do not want the
sorting order to be messed up if LC_ALL is set in the environment.)
Reported-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200710163253.381630-3-mreitz@redhat.com>
Switch to the prebuilt xtensa toolchains release 2020.07.
Drop csp toolchain as the csp core is not a part of QEMU.
Add de233_fpu and dsp3400 toolchains to enable DFPU and FPU2000 tests.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[AJB: fix path in configure.sh]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200708082347.27318-1-jcmvbkbc@gmail.com>
Message-Id: <20200709141327.14631-13-alex.bennee@linaro.org>
I only spotted this in the small window between my testing with my
registry while waiting for the gitlab PR to go in. As we pre-pull the
registry image we know if that fails there isn't any point attempting
to use the cache. Fall back to the way we used to do it at that point.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200709141327.14631-12-alex.bennee@linaro.org>
In 06c4cc3660, we split the multiplication in two parts to avoid
a clang warning. But because double still rounds to 53 bits, this
does not provide additional precision beyond multiplication by
nextafter(0x1p64, 0), the largest representable value smaller
than 2**64.
However, since we have eliminated 1.0, mutiplying by 2**64 produces
a better distribution of input values to the output values.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200626200950.1015121-3-richard.henderson@linaro.org>
Since the seed must be non-zero, subtracting 1 means puts the
rate in 0..UINT64_MAX-1, which allows the 0 and UINT64_MAX
thresholds to corrspond to 0% (never) and 100% (always).
Suggested-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200626200950.1015121-2-richard.henderson@linaro.org>
If we want to continue to split build and check phase it seems like a
good idea to allow building of the tests during our multi-threaded
build phase.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200701135652.1366-40-alex.bennee@linaro.org>
Total execution time with "-m slow" and x86_64 QEMU, drops from 3
minutes 15 seconds, down to 54 seconds.
Individual tests drop from 17-20 seconds, down to 3-4 seconds.
The cost of this change is that any QOM bugs resulting in the test
failure will not be directly associated with the device that caused
the failure. The test case is not frequently identifying such bugs
though, and the cause is likely easily visible in the patch series
that causes the failure. So overall the shorter running time is
considered the more important factor.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[thuth: Add the tree check to test_device_intro_none() and
test_device_intro_abstract(), too, just to be sure...]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200710060719.22386-1-thuth@redhat.com>
We happily use all the cross images for both cross-building QEMU as
well as building the linux-user tests. However calling docker from
within docker seems not to work. As we can build in Debian anyway why
not include an image that has all the compilers available for
non-docker invocation.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-33-alex.bennee@linaro.org>
We were missing a bunch of compilers which we could use if they were
locally installed. The defaults are based on Debian as they seem to be
the best distro for well distributed cross-build compilers.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200701135652.1366-32-alex.bennee@linaro.org>
As part of migrating things from Travis to GitLab add the acceptance
tests. To do this:
- rename system1 to system-ubuntu-main
- rename system2 to system-fedora-misc
- split into build/check/acceptance
- remove -j from check stages
- use artifacts to save build stage
- add post acceptance template and use
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-31-alex.bennee@linaro.org>
This fails on GitLab but not when run locally on the same container
image. It's very confusing.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200701135652.1366-30-alex.bennee@linaro.org>
For some reason these tests fail all the time on GitLab. I can
re-create the hang around 3% of the time locally but it doesn't seem
to be MTTCG related. For now skipIf on GITLAB_CI.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <20200701135652.1366-29-alex.bennee@linaro.org>
The old path doesn't exist but the rx-virt.dtb file has the same
checksum so lets use that.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200701135652.1366-28-alex.bennee@linaro.org>
Currently the test takes more the 900 seconds on GitLab and then times
out. Running on Travis seems to be OK.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200701135652.1366-27-alex.bennee@linaro.org>
We need additional python packages to run check-acceptance. Add them
to the docker images we will be using later.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200701135652.1366-26-alex.bennee@linaro.org>
This allows us to point the tools towards a registry from which they
can grab pre-built layers instead of doing everything from scratch
each time. To enable this we need to be using the DOCKER_BUILDKIT
engine.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200701135652.1366-25-alex.bennee@linaro.org>
We've been misusing the tag naming scheme for some time by overloading
the post : section with the image type. Really it should be saved for
the revision of that particular build. Move the details to the other
side so we have:
qemu/image-name
with the implied :latest version added by the tooling.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-18-alex.bennee@linaro.org>
Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-17-alex.bennee@linaro.org>
We currently limit TCG guests to -smp 1 but now we have added some
aarch64 guests we can do better when running on x86_64 hardware.
Raise the limit for TCG guests when it is safe to do so.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200701135652.1366-16-alex.bennee@linaro.org>
optparse has been deprecated since version 3.2 and argparse is the
blessed replacement. Take the opportunity to enhance our help output
showing defaults when called.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Message-Id: <20200701135652.1366-15-alex.bennee@linaro.org>
This adds support to basevm.py so that we always
drain the console chars. This makes use of
support added in an earlier commit that allows
QEMUMachine to use the ConsoleSocket.
This is a workaround we found was needed since
there is a known issue where QEMU will hang waiting
for console characters to be consumed.
We also added the option of logging the console to a file.
LOG_CONSOLE=1 will now log the output to a file.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-10-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-14-alex.bennee@linaro.org>
This change converts existing scripts to using for example self.ROOT_PASS,
to self._config['root_pass'].
We made similar changes for GUEST_USER, and GUEST_PASS.
This allows us also to remove the change in basevm.py,
which adds __getattr__ for backwards compatibility.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200601211421.1277-8-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-12-alex.bennee@linaro.org>
centos.aarch64 creates a CentOS 8 image.
Also added a new kickstart script used to build the centos.aarch64 image.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-7-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-11-alex.bennee@linaro.org>
ubuntu.aarch64 provides a script to create an Ubuntu 18.04 VM.
Another new file is also added aarch64vm.py, which is a module with
common methods used by aarch64 VMs, such as how to create the
flash images.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-6-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-10-alex.bennee@linaro.org>
Add a common Ubuntu python module and make use of
it with the ubuntu.i386 script.
This is preparation for adding an Ubuntu script
ubuntu.aarch64. Splitting out the common
logic such as build_image() will reduce duplication.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-5-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-9-alex.bennee@linaro.org>
Changes to tests/vm/basevm.py to allow accepting a configuration file
as a parameter. Allows for specifying VM options such as
cpu, machine, memory, and arbitrary qemu arguments for specifying options
such as NUMA configuration.
Also added an example conf_example_aarch64.yml and conf_example_x86.yml.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-4-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-8-alex.bennee@linaro.org>
Added use of a configuration to tests/vm/basevm.py.
The configuration provides parameters used to configure a VM.
This allows for providing alternate configurations to the VM being
created/launched. cpu, machine, memory, and NUMA configuration are all
examples of configuration which we might want to vary on the VM being created
or launched.
This will for example allow for creating an aarch64 vm.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-3-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-7-alex.bennee@linaro.org>
Adding the args parameter to BaseVM's __init__.
We will shortly need to pass more parameters to the class
so let's just pass args rather than growing the parameter list.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-2-robert.foley@linaro.org>
Message-Id: <20200701135652.1366-6-alex.bennee@linaro.org>
The test is based on
https://github.com/seharris/qemu-avr-tests/tree/master/free-rtos/Demo
demo which. If working correctly, prints 'ABCDEFGHIJKLMNOPQRSTUVWX' out.
it also demostrates that timer and IRQ are working
As the path name demonstrates, the FreeRTOS tests target a
board based on a ATMega2560 MCU. We have one, the Arduino
MEGA2560.
Complementary documentation:
https://feilipu.me/2012/01/15/ethermega-arduino-mega-2560-and-freertos/https://feilipu.me/2015/11/24/arduino_freertos/ (see 'Compatibility')
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[rth: Squash multiple avocado fixups from f4bug]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Print out 'T' through serial port.
The Arduino Duemilanove is based on a AVR5 CPU, while the
Arduino MEGA2560 on a AVR6 CPU.
Signed-off-by: Michael Rolnik <mrolnik@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[rth: Squash Arduino adjustments from f4bug]
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Aleksandar Markovic <aleksandar.m.mail@gmail.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20200705140315.260514-29-huth@tuxfamily.org>
