genisoimage is needed for running the tests/qtest/cdrom-test qtest.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201006174347.152040-1-thuth@redhat.com>
Message-Id: <20201007160038.26953-7-alex.bennee@linaro.org>
This patch adds a new 'coroutine' flag to QMP command definitions that
tells the QMP dispatcher that the command handler is safe to be run in a
coroutine.
The documentation of the new flag pretends that this flag is already
used as intended, which it isn't yet after this patch. We'll implement
this in another patch in this series.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-9-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The correct way to set the current monitor for a coroutine handler will
be different than for a blocking handler, so monitor_set_cur() needs to
be called in qmp_dispatch().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-7-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
cur_mon really needs to be coroutine-local as soon as we move monitor
command handlers to coroutines and let them yield. As a first step, just
remove all direct accesses to cur_mon so that we can implement this in
the getter function later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-4-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We add the kvm-steal-time CPU property and implement it for machvirt.
A tiny bit of refactoring was also done to allow pmu and pvtime to
use the same vcpu device helper functions.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20201001061718.101915-7-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
arm-cpu-features got dropped from the AArch64 tests during the meson
conversion shuffle.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20201001061718.101915-6-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Fix corner cases in booting from ECKD
* s390x-ccw bios cleanup part 2
-----BEGIN PGP SIGNATURE-----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=T7wc
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-10-06' into staging
* Don't stop at the first unbootable device, continue scanning
* Fix corner cases in booting from ECKD
* s390x-ccw bios cleanup part 2
# gpg: Signature made Tue 06 Oct 2020 19:17:46 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2020-10-06:
tests/qtest/cdrom: Add more s390x-related boot tests
pc-bios/s390: Update the s390-ccw bios binaries
pc-bios: s390x: Go into disabled wait when encountering a PGM exception
pc-bios: s390x: Use reset PSW if avaliable
pc-bios: s390x: Save PSW rework
pc-bios: s390x: Fix bootmap.c zipl component entry data handling
pc-bios/s390-ccw: break loop if a null block number is reached
pc-bios/s390-ccw: fix off-by-one error
pc-bios/s390-ccw/main: Remove superfluous call to enable_subchannel()
pc-bios/s390-ccw: Allow booting in case the first virtio-blk disk is bad
pc-bios/s390-ccw: Scan through all devices if no boot device specified
pc-bios/s390-ccw: Do not bail out early if not finding a SCSI disk
pc-bios/s390-ccw: Move the inner logic of find_subch() to a separate function
pc-bios/s390-ccw: Introduce ENODEV define and remove guards of others
pc-bios/s390-ccw: Move ipl-related code from main() into a separate function
pc-bios/s390-ccw/Makefile: Compile with -std=gnu99, -fwrapv and -fno-common
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let's add two new tests:
1) Booting with "bootindex" is the architected default behavior on the
s390x target, so we should have at least one test that is using the
"bootindex" property.
2) The s390-ccw bios used to fail when other unbootable devices have
been specified before the bootable device (without "bootindex"). Now
that the s390-ccw bios is a little bit smarter here, we should test
this scenario, too, to avoid regressions.
Message-Id: <20200806105349.632-10-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
v2:
* Removed clang-format call from scripts/block-coroutine-wrapper.py. This
avoids the issue with clang version incompatibility. It could be added back
in the future but the code is readable without reformatting and it also
makes the build less dependent on the environment.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAl97PuQACgkQnKSrs4Gr
c8hTSQf/XMXm817fZxhiHssHisuh4c2TB1kUdDZPz9zr1sUg7fuBJEATtXGi9mYx
cLHpDZWFesZEB19tmg9bTu1U5h+9/KAr4KKUWQSAhUPzFx6eQTz+/MOssLfGTyOT
i7lBsDkA0czI0v1SxXx2bJNGQkOijQ2gpXVk/RumpCqPdH68p+l+rCbu9mNFr57/
bjP6jiGbLpUBAfVwTHWkdyJrubwTrN9ni2RFRYb6GYs5qlO3yhVOo8Xs0zVkERkP
YqNrLsIXtzxomc82Yenv11bmsK//kTPyeUsNl5DP8J1s9l6U2RCMo1IMcFa4/pbe
D3wCPADfHQ4kaQpNrNsG64scSDkDpg==
=AcXm
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha-gitlab/tags/block-pull-request' into staging
Pull request
v2:
* Removed clang-format call from scripts/block-coroutine-wrapper.py. This
avoids the issue with clang version incompatibility. It could be added back
in the future but the code is readable without reformatting and it also
makes the build less dependent on the environment.
# gpg: Signature made Mon 05 Oct 2020 16:42:28 BST
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha-gitlab/tags/block-pull-request:
util/vfio-helpers: Rework the IOVA allocator to avoid IOVA reserved regions
util/vfio-helpers: Collect IOVA reserved regions
docs: add 'io_uring' option to 'aio' param in qemu-options.hx
include/block/block.h: drop non-ascii quotation mark
block/io: refactor save/load vmstate
block: drop bdrv_prwv
block: generate coroutine-wrapper code
scripts: add block-coroutine-wrapper.py
block: declare some coroutine functions in block/coroutines.h
block/io: refactor coroutine wrappers
block: return error-code from bdrv_invalidate_cache
block/nvme: Replace magic value by SCALE_MS definition
block/nvme: Use register definitions from 'block/nvme.h'
block/nvme: Drop NVMeRegs structure, directly use NvmeBar
block/nvme: Reduce I/O registers scope
block/nvme: Map doorbells pages write-only
util/vfio-helpers: Pass page protections to qemu_vfio_pci_map_bar()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is a test for GDB reverse debugging commands: reverse step and reverse continue.
Every test in this suite consists of two phases: record and replay.
Recording saves the execution of some instructions and makes an initial
VM snapshot to allow reverse execution.
Replay saves the order of the first instructions and then checks that they
are executed backwards in the correct order.
After that the execution is replayed to the end, and reverse continue
command is checked by setting several breakpoints, and asserting
that the execution is stopped at the last of them.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
--
v5:
- disabled (as some other tests) when running on gitlab
due to the unidentified timeout problem
Message-Id: <160174524678.12451.13258942849173670277.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Saving icount as a parameters of the snapshot allows navigation between
them in the execution replay scenario.
This information can be used for finding a specific snapshot for proceeding
the recorded execution to the specific moment of the time.
E.g., 'reverse step' action (introduced in one of the following patches)
needs to load the nearest snapshot which is prior to the current moment
of time.
This patch also updates snapshot test which verifies qemu monitor output.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
--
v4 changes:
- squashed format update with test output update
v7 changes:
- introduced the spaces between the fields in snapshot info output
- updated the test to match new field widths
Message-Id: <160174518865.12451.14327573383978752463.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch introduces the icount field for saving within the snapshot.
It is required for navigation between the snapshots in record/replay mode.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Acked-by: Kevin Wolf <kwolf@redhat.com>
--
v7 changes:
- also fix the test which checks qcow2 snapshot extra data
Message-Id: <160174518284.12451.2301137308458777398.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SLIRP uses Meson so it could become a subproject in the future,
but our choice of configure options is not yet supported in Meson
(https://github.com/mesonbuild/meson/pull/7740).
For now, build the library via the main meson.build just like for
capstone.
This improves the current state of affairs in that we will re-link
the qemu executables against a changed libslirp.a, which we wouldn't
do before-hand.
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
refactoring of cpus.c continues with cpu timer state extraction.
cpu-timers: responsible for the softmmu cpu timers state,
including cpu clocks and ticks.
icount: counts the TCG instructions executed. As such it is specific to
the TCG accelerator. Therefore, it is built only under CONFIG_TCG.
One complication is due to qtest, which uses an icount field to warp time
as part of qtest (qtest_clock_warp).
In order to solve this problem, provide a separate counter for qtest.
This requires fixing assumptions scattered in the code that
qtest_enabled() implies icount_enabled(), checking each specific case.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[remove redundant initialization with qemu_spice_init]
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[fix lingering calls to icount_get]
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that we are not maintaining boilerplate code for coroutine
wrappers, there is no more sense in keeping the extra indirection layer
of bdrv_prwv(). Let's drop it and instead generate pure bdrv_preadv()
and bdrv_pwritev().
Currently, bdrv_pwritev() and bdrv_preadv() are returning bytes on
success, auto generated functions will instead return zero, as their
_co_ prototype. Still, it's simple to make the conversion safe: the
only external user of bdrv_pwritev() is test-bdrv-drain, and it is
comfortable enough with bdrv_co_pwritev() instead. So prototypes are
moved to local block/coroutines.h. Next, the only internal use is
bdrv_pread() and bdrv_pwrite(), which are modified to return bytes on
success.
Of course, it would be great to convert bdrv_pread() and bdrv_pwrite()
to return 0 on success. But this requires audit (and probably
conversion) of all their users, let's leave it for another day
refactoring.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200924185414.28642-7-vsementsov@virtuozzo.com>
For some reason diffutils is not included in the Fedora containers anymore,
causing the build to fail.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201003085054.332992-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use pattern rules to clarify which targets are going to match the
rule and to provide clearer error messages.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Prepare for moving the tests to meson. For now they only have
enabled/disabled as the possible values when meson is invoked,
but "auto" will be a possibility later, when configure will only
parse the command line options.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200924152717.287415-32-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is useful for specifying 'generic' as supported (which includes
only writable image formats), but still excluding some incompatible
writable formats.
It also removes more lines than it adds.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200924152717.287415-31-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a function to list the NBD exports offered by an NBD server.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200924152717.287415-30-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have three almost identical functions that call an external process
and return its output and return code. Refactor them into small wrappers
around a common function.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200924152717.287415-29-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Clients may want to know when an export has finally disappeard
(block-export-del returns earlier than that in the general case), so add
a QAPI event for it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200924152717.287415-22-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We'll need an id to identify block exports in monitor commands. This
adds one.
Note that this is different from the 'name' option in the NBD server,
which is the externally visible export name. While block export ids need
to be unique in the whole process, export names must be unique only for
the same server. Different export types or (potentially in the future)
multiple NBD servers can have the same export name externally, but still
need different block export ids internally.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-19-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
macOS is shipped with a very old version of the bash (3.2), which
is currently not suitable for running the iotests anymore (e.g.
it is missing support for "readarray" which is used in the file
tests/qemu-iotests/common.filter). Add a check to skip the iotests
in this case - if someone still wants to run the iotests on macOS,
they can install a newer version from homebrew, for example.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200918153514.330705-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All our supported build platforms have Python 3.6 or newer nowadays, and
there are some useful features in Python 3.6 which are not available in
3.5 yet (e.g. the type hint annotations which will allow us to statically
type the QAPI parser), so let's bump the minimum Python version to 3.6 now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200923162908.95372-1-thuth@redhat.com>
Message-Id: <20200925154027.12672-16-alex.bennee@linaro.org>
We do not support Debian 9 in QEMU anymore, and the Debian 9 containers
are now no longer used in the gitlab-CI. Time to remove them.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200921174320.46062-6-thuth@redhat.com>
Message-Id: <20200925154027.12672-14-alex.bennee@linaro.org>
We do not support Debian 9 anymore, thus update the Tricore container
to Debian 10 now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200921174320.46062-4-thuth@redhat.com>
Message-Id: <20200925154027.12672-12-alex.bennee@linaro.org>
According to our support policy, we do not support Debian 9 in QEMU
anymore, and we only support building the Windows binaries with a
very recent version of the MinGW toolchain. So we should not test
the MinGW cross-compilation with Debian 9 anymore, but switch to
something newer like Fedora. To do this, we need a separate Fedora
container for each build that provides the QEMU_CONFIGURE_OPTS
environment variable.
Unfortunately, the MinGW 64-bit compiler seems to be a little bit
slow, so we also have to disable some features like "capstone" in the
build here to make sure that the CI pipelines still finish within a
reasonable amount of time.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200921174320.46062-2-thuth@redhat.com>
Message-Id: <20200925154027.12672-10-alex.bennee@linaro.org>
We don't need to use kernel-irqchip=off for irq0 override if IRQ
routing is supported by the host, which is the case since 2009
(IRQ routing was added to KVM in Linux v2.6.30).
This is a more straightforward fix for Launchpad bug #1896263, as
it doesn't require increasing the complexity of the MSR code.
kernel-irqchip=off is for debugging only and there's no need to
increase the complexity of the code just to work around an issue
that was already fixed in the kernel.
Fixes: https://bugs.launchpad.net/bugs/1896263
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200922194732.2100510-1-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 660f793093 was a bit overzealous
with respect to tests/tcg, which needed quiet-command and $(BUILD_DIR).
Reinstate quiet-command, and replace $(BUILD_DIR) with just the
current directory.
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make things consistent with how softmmu/vl.c uses os_find_datadir.
Initializing the path to the executables will also be needed for
get_relocatable_path to work.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Just return the directory without requiring the caller to free it.
This also removes a bogus check for NULL in os_find_datadir and
module_load_one; g_strdup of a static variable cannot return NULL.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This does not have any effect on Meson's behavior itself, since "meson test"
always rebuilds everything (that is one reason why we are not using it...).
However, mtest2make can use this information to do a selective rebuild
for the requested suite.
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Build all executables by default except for the known-broken ones.
This also allows running qemu-iotests without manually building
socket_scm_helper.
Reported-by: Max Reitz <mreitz@redhat.com>
Tested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix high-parallelism builds by forcing all generated headers
to be created before tests are compiled.
Reported-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This just adds a unit test for previously merged functionality.
A bit unusual, but we have a contribitor under a deadline,
let's be nice and merge the unit test right away - does no harm.
Hopefully this won't be a beginning of a trend ...
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl90PhkPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp6MIH/isej+gtqmq/N6RTV6cixf/5NYOgWXpIK1aC
RxA/x979yQKM5FM9doa0LbzPlg+ljPI9rizM0KIqH3tTtAmtpmPbvxVcqlCQI6Uc
iPLFMbKaBoxkxGKKudGkGxAwfDi27vum2xYggm2iQiDsTsZkn/fIMpgpXmxNnvP4
PI3XceMs26lRRdNGICVmp7PKlI8wyvXzFPhAwsBo5CCdpr90CgSuFIpthRnrfCID
usVvoEY9nMItnJ2/6FQZLT2/P9vDVFfpndmslz8Ky1ZcythgxBshdigYfAy2FIAU
PVcN0a9toCPS5185tIvvCT/LbjfgtwKgB/FawJGM1ScxXWvdgHk=
=vr3O
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
acpi: unit test
This just adds a unit test for previously merged functionality.
A bit unusual, but we have a contribitor under a deadline,
let's be nice and merge the unit test right away - does no harm.
Hopefully this won't be a beginning of a trend ...
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 30 Sep 2020 09:13:13 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
tests/acpi: add DSDT.hpbrroot DSDT table blob to test global i440fx hotplug
tests/acpi: unit test exercising global pci hotplug off for i440fx
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
... into new test_acpi_microvm_prepare helper
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-10-kraxel@redhat.com
This change adds a unit test to exercise the case when hotplug is disabled
both for pci root bus and the pci bridges by passing the following two
switches to qemu:
-global PIIX4_PM.acpi-root-pci-hotplug=off
-global PIIX4_PM.acpi-pci-hotplug-with-bridge-support=off
bios-tables-test-allowed-diff.h documents the fact that a new DSDT acpi gold
master binary blob we need to be added to test this. We will do the actual
addition in the next patch in the series.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200929123011.31836-2-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We don't need texinfo to build the docs any more, so we can
drop that dependency from our docker and other CI configs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-22-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We no longer use the generated texinfo format documentation,
so delete the code that generates it, and the test case for
the generation.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-17-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add a test of the rST output from the QAPI doc-comment generator,
similar to what we currently have that tests the Texinfo output.
This is a bit more awkward with Sphinx, because the generated output
is not 100% under our control the way the QAPI-to-Texinfo generator
was. We can't observe the data we generate, only the Sphinx
output. Two issues.
One, the output can vary with the Sphinx version. In practice Sphinx's
plaintext output generation has been identical between at least Sphinx
1.6 and 3.0, so we use that. (The HTML output has had changes across
versions). We use an exact-match comparison check, with the
understanding that perhaps changes in a future Sphinx version might
require us to implement something more clever to cope with variation
in the output.
Two, the test can only protect us from changes in the data we generate
that are visible in plain text.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-16-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
doc-good.json currently uses the old *strong* and _emphasis_ markup.
As part of the conversion to rST this needs to switch to **strong**
and *emphasis*, because rST uses underscores as part of its markup
of hyperlinks and will otherwise warn about the syntax error.
In commit a660eed482 we fixed up the in-tree uses of the
old markup:
1) _this_ was replaced with *this*
2) the only in-tree use of *this* was left alone (turning
a 'strong' into an 'emphasis')
(and so currently in-tree nothing is using either new-style
**strong** or old-style _emphasis_).
Update doc-good.json in a similar way:
1) replace _this_ with *this*
2) remove the usage of old-style *this*
(This slightly reduces the coverage for the old Texinfo generator,
which is about to go away, but is fine for the new rST generator
because that does not need to handle strong/emphasis itself because
it is simply passing the entire text as raw rST to Sphinx.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-13-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Make the handling of indentation in doc comments more sophisticated,
so that when we see a section like:
Notes: some text
some more text
indented line 3
we save it for the doc-comment processing code as:
some text
some more text
indented line 3
and when we see a section with the heading on its own line:
Notes:
some text
some more text
indented text
we also accept that and save it in the same form.
If we detect that the comment document text is not indented as much
as we expect it to be, we throw a parse error. (We don't complain
about over-indented sections, because for rST this can be legitimate
markup.)
The golden reference for the doc comment text is updated to remove
the two 'wrong' indents; these now form a test case that we correctly
stripped leading whitespace from an indented multi-line argument
definition.
We update the documentation in docs/devel/qapi-code-gen.txt to
describe the new indentation rules.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-6-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Whitespace between sentences tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
As we accumulate lines from doc comments when parsing the JSON, the
QAPIDoc class generally strips leading and trailing whitespace using
line.strip() when it calls _append_freeform(). This is fine for
Texinfo, but for rST leading whitespace is significant. We'd like to
move to having the text in doc comments be rST format rather than a
custom syntax, so move the removal of leading whitespace from the
QAPIDoc class to the texinfo-specific processing code in
texi_format() in qapi/doc.py.
(Trailing whitespace will always be stripped by the rstrip() in
Section::append regardless.)
In a followup commit we will make the whitespace in the lines of doc
comment sections more consistently follow the input source.
There is no change to the generated .texi files before and after this
commit.
Because the qapi-schema test checks the exact values of the
documentation comments against a reference, we need to update that
reference to match the new whitespace. In the first four places this
is now correctly checking that we did put in the amount of whitespace
to pass a rST-formatted list to the backend; in the last two places
the extra whitespace is 'wrong' and will go away again in the
following commit.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-5-peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
doc-good.json tests doc comment parser corner cases. We're about to
largely replace it by a Sphinx extension, which will have different
corner cases. Tweak the test so it passes both with the old parser
and the Sphinx extension, by making it match the more restrictive
rST syntax:
* in a single list the bullet types must all match
* lists must have leading and following blank lines
* the rules on when and where indentation matters differ
* the '|' example syntax is going to go away entirely, so stop
testing it
This will avoid the tests spuriously breaking when we tighten up the
parser code in the following commits.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200925162316.21205-4-peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The last pull added a ton of useless files by mistake.
Drop them all.
Fixes: 0ed93f4c05 ("update golden master DSDT binary table blobs for q35")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In the previously applied commit ("piix4: don't reserve hw resources when
hotplug is off globally"), we make changes to the ACPI DSDT tables
such that some ACPI code are not generated when bsel is absent. Since
as of this point in time, in q35 machines, we do not use bsel for pci
buses, we need to update the DSDT table blobs.
This patch updates the DSDT golden master tables for q35 machines.
At the same time, we clear bios-tables-test-allowed-diff.h for future
changes which update tables.
Following is a typical diff between the q35 acpi DSDT table blobs:
@@ -1,30 +1,30 @@
/*
* Intel ACPI Component Architecture
* AML/ASL+ Disassembler version 20180105 (64-bit version)
* Copyright (c) 2000 - 2018 Intel Corporation
*
* Disassembling to symbolic ASL+ operators
*
- * Disassembly of tests/data/acpi/q35/DSDT, Tue Sep 15 18:52:47 2020
+ * Disassembly of /tmp/aml-3O0DR0, Tue Sep 15 18:52:47 2020
*
* Original Table Header:
* Signature "DSDT"
- * Length 0x00001DFE (7678)
+ * Length 0x00001DF6 (7670)
* Revision 0x01 **** 32-bit table (V1), no 64-bit math support
- * Checksum 0xAC
+ * Checksum 0x17
* OEM ID "BOCHS "
* OEM Table ID "BXPCDSDT"
* OEM Revision 0x00000001 (1)
* Compiler ID "BXPC"
* Compiler Version 0x00000001 (1)
*/
DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPCDSDT", 0x00000001)
{
Scope (\)
{
OperationRegion (DBG, SystemIO, 0x0402, One)
Field (DBG, ByteAcc, NoLock, Preserve)
{
DBGB, 8
}
@@ -3113,24 +3113,20 @@
Name (_ADR, 0x00010000) // _ADR: Address
Method (_S1D, 0, NotSerialized) // _S1D: S1 Device State
{
Return (Zero)
}
Method (_S2D, 0, NotSerialized) // _S2D: S2 Device State
{
Return (Zero)
}
Method (_S3D, 0, NotSerialized) // _S3D: S3 Device State
{
Return (Zero)
}
}
-
- Method (PCNT, 0, NotSerialized)
- {
- }
}
}
}
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-12-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The following patch ("piix4: don't reserve hw resources when
hotplug is off globally") modifies certain ACPI tables for q35 machines.
This patch adds those table names to tests/qtest/bios-tables-test-allowed-diff.h
so that unit tests continue to pass and bisection is not broken.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-10-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This change adds a new unit test for the global flag
'acpi-pci-hotplug-with-bridge-support' which is available for cold plugged pci
bridges in i440fx. The flag can be used to turn off ACPI based hotplug support
on all pci bridges.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-8-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The file 'tests/data/acpi/pc/DSDT.hpbridge' is a newly added acpi table file
for testing the pci bridge option 'acpi-pci-hotplug-with-bridge-support' under
i440fx. This change documents this fact.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-7-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Ability to turn hotplug off on the pci root bus for i440fx was added in commit:
3d7e78aa77 ("Introduce a new flag for i440fx to disable PCI hotplug on the
root bus")
This change adds a unit test in order to test this feature.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-3-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A new binary acpi table tests/data/acpi/pc/DSDT.roothp is added in order to
unit test the feature flag that can disable/enable root pci bus hotplug on
i440fx. This feature was added with the commit:
3d7e78aa77 ("Introduce a new flag for i440fx to disable PCI hotplug on
the root bus")
This change documents the fact that this new file addition was made as a part
of the unit test change.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-2-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
here is diff against tests/data/acpi/q35/DSDT
for currently shipped ovmf binary.
(once firmware blob is updated, it will negotiate CPU hotplug
feature which will ad extra hunk sending SMI and Q35 tests will
need to be updated), but otherwise diff shows new CPU hotplug
AML that is shared between q35 and pc machines.
Method (CSCN, 0, Serialized)
{
Acquire (\_SB.PCI0.PRES.CPLK, 0xFFFF)
- Local0 = One
- While ((Local0 == One))
- {
- Local0 = Zero
- \_SB.PCI0.PRES.CCMD = Zero
- If ((\_SB.PCI0.PRES.CINS == One))
+ Name (CNEW, Package (0xFF){})
+ Local3 = Zero
+ Local4 = One
+ While ((Local4 == One))
+ {
+ Local4 = Zero
+ Local0 = One
+ Local1 = Zero
+ While (((Local0 == One) && (Local3 < One)))
{
- CTFY (\_SB.PCI0.PRES.CDAT, One)
- \_SB.PCI0.PRES.CINS = One
- Local0 = One
+ Local0 = Zero
+ \_SB.PCI0.PRES.CSEL = Local3
+ \_SB.PCI0.PRES.CCMD = Zero
+ If ((\_SB.PCI0.PRES.CDAT < Local3))
+ {
+ Break
+ }
+
+ If ((Local1 == 0xFF))
+ {
+ Local4 = One
+ Break
+ }
+
+ Local3 = \_SB.PCI0.PRES.CDAT
+ If ((\_SB.PCI0.PRES.CINS == One))
+ {
+ CNEW [Local1] = Local3
+ Local1++
+ Local0 = One
+ }
+ ElseIf ((\_SB.PCI0.PRES.CRMV == One))
+ {
+ CTFY (Local3, 0x03)
+ \_SB.PCI0.PRES.CRMV = One
+ Local0 = One
+ }
+
+ Local3++
}
- ElseIf ((\_SB.PCI0.PRES.CRMV == One))
+
+ Local2 = Zero
+ While ((Local2 < Local1))
{
- CTFY (\_SB.PCI0.PRES.CDAT, 0x03)
- \_SB.PCI0.PRES.CRMV = One
- Local0 = One
+ Local3 = DerefOf (CNEW [Local2])
+ CTFY (Local3, One)
+ Debug = Local3
+ \_SB.PCI0.PRES.CSEL = Local3
+ \_SB.PCI0.PRES.CINS = One
+ Local2++
}
}
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200923094650.1301166-11-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
... to let tests pass until binary blobs are updated with new AML
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200923094650.1301166-6-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These were deprecated since 4.0, remove both HMP and QMP variants.
Users should use device_add command instead. To get list of
possible CPUs and options, use 'info hotpluggable-cpus' HMP
or query-hotpluggable-cpus QMP command.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200915120403.1074579-1-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For now only vhost-user-net device is supported by the test. Other
vhost-user devices are not tested. As a first step make source code
refactoring so new devices can reuse the same test routines. To make
this provide a new vhost_user_ops structure with the methods to
initialize device, its command line or make a proper vhost-user
responses.
Signed-off-by: Dima Stepanov <dimastep@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <a48b60fb96fef230b75fff72a2d77040dcb5ef7c.1599813294.git.dimastep@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
clang's C11 atomic_fetch_*() functions only take a C11 atomic type
pointer argument. QEMU uses direct types (int, etc) and this causes a
compiler error when a QEMU code calls these functions in a source file
that also included <stdatomic.h> via a system header file:
$ CC=clang CXX=clang++ ./configure ... && make
../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid)
Avoid using atomic_*() names in QEMU's atomic.h since that namespace is
used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h
and <stdatomic.h> can co-exist. I checked /usr/include on my machine and
searched GitHub for existing "qatomic_" users but there seem to be none.
This patch was generated using:
$ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \
sort -u >/tmp/changed_identifiers
$ for identifier in $(</tmp/changed_identifiers); do
sed -i "s%\<$identifier\>%q$identifier%g" \
$(git grep -I -l "\<$identifier\>")
done
I manually fixed line-wrap issues and misaligned rST tables.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
Test aio_disable_external(), which switches from fdmon-epoll back to
fdmon-poll. This resulted in an assertion failure that was fixed in the
previous patch.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200915120339.702938-3-stefanha@redhat.com>
The iov_discard_front/back() operations are useful for parsing iovecs
but they modify the array elements. If the original array is needed
after parsing finishes there is currently no way to restore it.
Although g_memdup() can be used before performing destructive
iov_discard_front/back() operations, this is inefficient.
Introduce iov_discard_undo() to restore the array to the state prior to
an iov_discard_front/back() operation.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <20200917094455.822379-2-stefanha@redhat.com>
If you have the chain 'base.qcow2 <- top.qcow2' and want to merge a
bitmap from top into base, qemu-img was failing with:
qemu-img: Could not open 'top.qcow2': Could not open backing file: Failed to get shared "write" lock
Is another process using the image [base.qcow2]?
The easiest fix is to not open the entire backing chain of either
image (source or destination); after all, the point of 'qemu-img
bitmap' is solely to manipulate bitmaps directly within a single qcow2
image, and this is made more precise if we don't pay attention to
other images in the chain that may happen to have a bitmap by the same
name.
However, note that on a case-by-case analysis, there _are_ times where
we treat it as a feature that we can access a bitmap from a backing
layer in association with an overlay BDS. A demonstration of this is
using NBD to expose both an overlay BDS (for constant contents) and a
bitmap (for learning which blocks are interesting) during an
incremental backup:
Base <- Active <- Temporary
\--block job ->/
where Temporary is being fed by a backup 'sync=none' job. When
exposing Temporary over NBD, referring to a bitmap that lives only in
Active is less effort than having to copy a bitmap into Temporary [1].
So the testsuite additions in this patch check both where bitmaps get
allocated (the qemu-img info output), and that qemu-nbd is indeed able
to access a bitmap inherited from the backing chain since it is a
different use case than 'qemu-img bitmap'.
[1] Full disclosure: prior to the recent commit 374eedd1c4 and
friends, we were NOT able to see bitmaps through filters, which meant
that we actually did not have nice clean semantics for uniformly being
able to pick up bitmaps from anywhere in the backing chain (seen as a
change in behavior between qemu 4.1 and 4.2 at commit 00e30f05de, when
block-copy swapped from a one-off to a filter). Which means libvirt
was already coded to copy bitmaps around for the sake of older qemu,
even though modern qemu no longer needs it. Oh well.
Fixes: http://bugzilla.redhat.com/1877209
Reported-by: Eyal Shenitzky <eshenitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200914191009.644842-1-eblake@redhat.com>
[eblake: more commit message tweaks, per Max Reitz review]
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
object_property_get_enum() is the only object_property_FOO() that is
documented to return an undefined value on error. It does no such
thing, actually: it returns 0 on some errors, and -1 on others.
Needlessly complicated. Always return -1 on error, and adjust the
contract.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200917125540.597786-2-armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The 'arm_quanta_gsj_initrd' test is timeouting on GitLab CI:
https://gitlab.com/philmd/qemu/-/jobs/745483978#L846
and also sometimes on my workstation, so proceed as with
the other slow tests: do not run it by default.
The test can still be run setting the AVOCADO_TIMEOUT_EXPECTED
environment variable.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Tested-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-Id: <20200918143355.153522-1-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Armbian servers are not very reliable and confused the GitLab CI
users a few times this month (path updated, archives moved, and
now the SSL: CERTIFICATE_VERIFY_FAILED "certificate has expired"
error). Time to disable these tests.
Users can still use the artifacts from the cache (or manually add
them to the cache).
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20200917163954.50514-1-philmd@redhat.com>
Avoid that containers pile up.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On win32 the line ending are \r\n, so we skip the \n in function test_dynamic_globalprop
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200915171234.236-22-luoyonggang@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Fixes following errors:
Running test test-util-sockets
ERROR test-util-sockets - missing test plan
# Start of name tests
**
ERROR:../tests/test-util-sockets.c:93:test_socket_fd_pass_name_good: assertion failed (fd != -1): (-1 != -1)
Bail out! ERROR:../tests/test-util-sockets.c:93:test_socket_fd_pass_name_good: assertion failed (fd != -1): (-1 != -1)
First should call to qemu_init_main_loop before socket_init,
then on win32 doesn't support for SOCKET_ADDRESS_TYPE_FD socket type
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200915121318.247-21-luoyonggang@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently test-io-channel-socket doesn't init with
qemu_init_main_loop
and that's cause the qemu_aio_context not inited,
and the following is the stack when null pointer accessed:
qemu_fd_register (c:\work\xemu\qemu\util\main-loop.c:336)
qemu_try_set_nonblock (c:\work\xemu\qemu\util\oslib-win32.c:224)
qemu_set_nonblock (c:\work\xemu\qemu\util\oslib-win32.c:230)
socket_can_bind_connect (c:\work\xemu\qemu\tests\socket-helpers.c:93)
socket_check_protocol_support (c:\work\xemu\qemu\tests\socket-helpers.c:141)
main (c:\work\xemu\qemu\tests\test-io-channel-socket.c:568)
__tmainCRTStartup (@__tmainCRTStartup:142)
mainCRTStartup (@1400014f6..140001539:3)
BaseThreadInitThunk (@BaseThreadInitThunk:9)
RtlUserThreadStart (@RtlUserThreadStart:12)
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200915121318.247-18-luoyonggang@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The vmstate are valid on win32, just need generate tmp path properly
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200910103059.987-17-luoyonggang@gmail.com>
[thuth: Make indentation a little bit nicer]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Ideally we would use the '--strip-trailing-cr' option, but not
being POSIX is a portability problem (i.e. BSDs and Solaris
based OSes). Instead use the '-b' option which, although doing
slightly more, produce the expected result on Windows."
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200915121318.247-11-luoyonggang@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
They caused failure on msys2/mingw, that's because file-win32.c not implement
.bdrv_reopen_prepare/commit/abort yet.
This is the error message:
> $ ./tests/test-replication.exe
> # random seed: R02S3f4d1c01af2b0a046990e0235c481faf
> 1..13
> # Start of replication tests
> # Start of primary tests
> ok 1 /replication/primary/read
> ok 2 /replication/primary/write
> ok 3 /replication/primary/start
> ok 4 /replication/primary/stop
> ok 5 /replication/primary/do_checkpoint
> ok 6 /replication/primary/get_error_all
> # End of primary tests
> # Start of secondary tests
> ok 7 /replication/secondary/read
> ok 8 /replication/secondary/write
> Unexpected error in bdrv_reopen_prepare() at ../block.c:4191:
> Block format 'file' used by node '#block4287' does not support reopening
> files
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200915121318.247-9-luoyonggang@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
On Windows there is no path like /tmp/s_local_disk.XXXXXX
Use g_get_tmp_dir instead of /tmp.
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200915121318.247-8-luoyonggang@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Disable following tests on msys2/mingw
'test-crypto-tlscredsx509': ['crypto-tls-x509-helpers.c', 'pkix_asn1_tab.c',
tasn1, crypto],
'test-crypto-tlssession': ['crypto-tls-x509-helpers.c', 'pkix_asn1_tab.c', 'crypto-tls-psk-helpers.c',
tasn1, crypto],
'test-io-channel-tls': ['io-channel-helpers.c', 'crypto-tls-x509-helpers.c', 'pkix_asn1_tab.c',
tasn1, io, crypto]}
These tests are failure with:
ERROR test-crypto-tlscredsx509 - missing test plan
ERROR test-crypto-tlssession - missing test plan
ERROR test-io-channel-tls - missing test plan
Because on win32 those test case are all disabled.
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Message-Id: <20200909094617.1582-12-luoyonggang@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Message-Id: <20200907200432.2418-3-luoyonggang@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
drain_call_rcu is necessary on win32, because under win32, if you
don't close the file before remove it, the remove would be fail.
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Message-Id: <20200915121318.247-23-luoyonggang@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
g_autofree are prefer than g_free when possible.
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200915121318.247-17-luoyonggang@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The tests/test-char test is currently always failing on my system since
the getaddrinfo() in socket_can_bind_connect() returns EAI_NONAME when
it is called from socket_check_protocol_support() to check for IPv6.
socket_check_protocol_support() then returns -1 and thus the tests are
not run at all - even though IPv4 is working fine.
socket_can_bind_connect() connect should return EADDRNOTAVAIL in this
case instead, so that socket_check_protocol_support() does not fail.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200908121543.222872-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We simply want to ignore certain queries here, so let's rather
use the term 'ignore' to express this intention.
Message-Id: <20200914163755.42618-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Telling QTest to log to /dev/fd/2, essentially results in dup(2). This
is fine, if other code isn't logging to stderr. Otherwise, the order of
the logs is mixed due to buffering issues, since two file-descriptors
are used to write to the same file. We can avoid this, since just
specifying "-qtest" sets the log fd to stderr. If we want to disable
qtest logs, we can just add -qtest-log none.
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200819061110.1320568-2-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
On macOS, (out of the box) readlink does not have -f. We do not really
need readlink here, though, it was just a replacement for realpath
(which is not available on our BSD test systems), which we needed to
make the $(dirname) into an absolute path.
Instead of using either, just use "cd; pwd" like is done for
$source_iotests.
Fixes: b1cbc33a39
("iotests: Allow running from different directory")
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Claudio Fontana <cfontana@suse.de>
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200914145606.94620-1-mreitz@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This function preallocates metadata structures and then extends the
image to its new size, but that new size calculation is wrong because
it doesn't take into account that the host_offset variable is always
cluster-aligned.
This problem can be reproduced with preallocation=metadata when the
original size is not cluster-aligned but the new size is. In this case
the final image size will be shorter than expected.
qemu-img create -f qcow2 img.qcow2 31k
qemu-img resize --preallocation=metadata img.qcow2 128k
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <adeb8b059917b141d5f5b3bd2a016262d3052c79.1599833007.git.berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
[mreitz: Mark compat=0.10 unsupported for iotest 125]
Signed-off-by: Max Reitz <mreitz@redhat.com>
