The CHS calculation as done per the VHD spec imposes a maximum image
size of ~127 GB. Real VHD images exist that are larger than that.
Apparently there are two separate non-standard ways to achieve this:
You could use more heads than the spec does - this is the option that
qemu-img create chooses.
However, other images exist where the geometry is set to the maximum
(65535/16/255), but the actual image size is larger. Until now, such
images are truncated at 127 GB when opening them with qemu.
This patch changes the vpc driver to ignore geometry in this case and
only trust the size field in the header.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
[PL: Fixed maximum geometry in the commit msg]
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-id: 1425379316-19639-3-git-send-email-pl@kamp.de
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
*pnum can't be greater than s->block_size / BDRV_SECTOR_SIZE for allocated
sectors since there is always a bitmap in between.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1425379316-19639-2-git-send-email-pl@kamp.de
Signed-off-by: Max Reitz <mreitz@redhat.com>
All callers are converted, so drop it.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1425296209-1476-5-git-send-email-famz@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
It is easy to create only self-referential refblocks, but there are
cases where that is impossible. This adds a test for two of those cases
(combined in a single test case).
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 1417798412-15330-1-git-send-email-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 1423598552-24301-3-git-send-email-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
When choosing a new place for the refcount table, alloc_refcount_block()
tries to infer the number of clusters used so far from its argument
cluster_index (which comes from the idea that if any cluster with an
index greater than cluster_index was in use, the refcount table would
have to be big enough already to describe cluster_index).
However, there is a cluster that may be at or after cluster_index, and
which is not covered by the refcount structures, and that is the new
refcount block new_block. Therefore, it should be taken into account for
the blocks_used calculation.
Also, because new_block already describes (or is intended to describe)
cluster_index, we may not put the new refcount structures there.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 1423598552-24301-2-git-send-email-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP. It should not be used
elsewhere. Replace by error_report_err().
Commit 6936f29 cleaned that up in qemu-img.c, but two calls have crept
in since. Take care of them the same way.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Error classes are a leftover from the days of "rich" error objects.
New code should always use ERROR_CLASS_GENERIC_ERROR. Commit e246211
added a use of ERROR_CLASS_DEVICE_NOT_FOUND. Replace it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We've steered users away from QCOW/QCOW2 encryption for a while,
because it's a flawed design (commit 136cd19 Describe flaws in
qcow/qcow2 encryption in the docs).
In addition to flawed crypto, we have comically bad usability, and
plain old bugs. Let me show you.
= Example images =
I'm going to use a raw image as backing file, and two QCOW2 images,
one encrypted, and one not:
$ qemu-img create -f raw backing.img 4m
Formatting 'backing.img', fmt=raw size=4194304
$ qemu-img create -f qcow2 -o encryption,backing_file=backing.img,backing_fmt=raw geheim.qcow2 4m
Formatting 'geheim.qcow2', fmt=qcow2 size=4194304 backing_file='backing.img' backing_fmt='raw' encryption=on cluster_size=65536 lazy_refcounts=off
$ qemu-img create -f qcow2 -o backing_file=backing.img,backing_fmt=raw normal.qcow2 4m
Formatting 'normal.qcow2', fmt=qcow2 size=4194304 backing_file='backing.img' backing_fmt='raw' encryption=off cluster_size=65536 lazy_refcounts=off
= Usability issues =
== Confusing startup ==
When no image is encrypted, and you don't give -S, QEMU starts the
guest immediately:
$ qemu-system-x86_64 -nodefaults -display none -monitor stdio normal.qcow2
QEMU 2.2.50 monitor - type 'help' for more information
(qemu) info status
VM status: running
But as soon as there's an encrypted image in play, the guest is *not*
started, with no notification whatsoever:
$ qemu-system-x86_64 -nodefaults -display none -monitor stdio geheim.qcow2
QEMU 2.2.50 monitor - type 'help' for more information
(qemu) info status
VM status: paused (prelaunch)
If the user figured out that he needs to type "cont" to enter his
keys, the confusion enters the next level: "cont" asks for at most
*one* key. If more are needed, it then silently does nothing. The
user has to type "cont" once per encrypted image:
$ qemu-system-x86_64 -nodefaults -display none -monitor stdio -drive if=none,file=geheim.qcow2 -drive if=none,file=geheim.qcow2
QEMU 2.2.50 monitor - type 'help' for more information
(qemu) info status
VM status: paused (prelaunch)
(qemu) c
none0 (geheim.qcow2) is encrypted.
Password: ******
(qemu) info status
VM status: paused (prelaunch)
(qemu) c
none1 (geheim.qcow2) is encrypted.
Password: ******
(qemu) info status
VM status: running
== Incorrect passwords not caught ==
All existing encryption schemes give you the GIGO treatment: garbage
password in, garbage data out. Guests usually refuse to mount
garbage, but other usage is prone to data loss.
== Need to stop the guest to add an encrypted image ==
$ qemu-system-x86_64 -nodefaults -display none -monitor stdio
QEMU 2.2.50 monitor - type 'help' for more information
(qemu) info status
VM status: running
(qemu) drive_add "" if=none,file=geheim.qcow2
Guest must be stopped for opening of encrypted image
(qemu) stop
(qemu) drive_add "" if=none,file=geheim.qcow2
OK
Commit c3adb58 added this restriction. Before, we could expose images
lacking an encryption key to guests, with potentially catastrophic
results. See also "Use without key is not always caught".
= Bugs =
== Use without key is not always caught ==
Encrypted images can be in an intermediate state "opened, but no key".
The weird startup behavior and the need to stop the guest are there to
ensure the guest isn't exposed to that state. But other things still
are!
* drive_backup
$ qemu-system-x86_64 -nodefaults -display none -monitor stdio geheim.qcow2
QEMU 2.2.50 monitor - type 'help' for more information
(qemu) drive_backup -f ide0-hd0 out.img raw
Formatting 'out.img', fmt=raw size=4194304
I guess this writes encrypted data to raw image out.img. Good luck
with figuring out how to decrypt that again.
* commit
$ qemu-system-x86_64 -nodefaults -display none -monitor stdio geheim.qcow2
QEMU 2.2.50 monitor - type 'help' for more information
(qemu) commit ide0-hd0
I guess this writes encrypted data into the unencrypted raw backing
image, effectively destroying it.
== QMP device_add of usb-storage fails when it shouldn't ==
When the image is encrypted, device_add creates the device, defers
actually attaching it to when the key becomes available, then fails.
This is wrong. device_add must either create the device and succeed,
or do nothing and fail.
$ qemu-system-x86_64 -nodefaults -display none -usb -qmp stdio -drive if=none,id=foo,file=geheim.qcow2
{"QMP": {"version": {"qemu": {"micro": 50, "minor": 2, "major": 2}, "package": ""}, "capabilities": []}}
{ "execute": "qmp_capabilities" }
{"return": {}}
{ "execute": "device_add", "arguments": { "driver": "usb-storage", "id": "bar", "drive": "foo" } }
{"error": {"class": "DeviceEncrypted", "desc": "'foo' (geheim.qcow2) is encrypted"}}
{"execute":"device_del","arguments": { "id": "bar" } }
{"timestamp": {"seconds": 1426003440, "microseconds": 237181}, "event": "DEVICE_DELETED", "data": {"path": "/machine/peripheral/bar/bar.0/legacy[0]"}}
{"timestamp": {"seconds": 1426003440, "microseconds": 238231}, "event": "DEVICE_DELETED", "data": {"device": "bar", "path": "/machine/peripheral/bar"}}
{"return": {}}
This stuff is worse than useless, it's a trap for users.
If people become sufficiently interested in encrypted images to
contribute a cryptographically sane implementation for QCOW2 (or
whatever other format), then rewriting the necessary support around it
from scratch will likely be easier and yield better results than
fixing up the existing mess.
Let's deprecate the mess now, drop it after a grace period, and move
on.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit c4bacaf improved error reporting, but neglected to update
051.out. Commit 2726958 tried to redress, but didn't get it quite
right (punctuation difference), and shortly after commit
ae071cc..master improved error reporting some more, neglecting 051.out
some more. Sorry!
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As seen with ubuntu-5.10-live-powerpc.iso.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Add helpers helper_subadr_h/_ssov which subs one halfword and adds one
halfword, rounds / and saturates each half word independently.
Add microcode helper functions:
* gen_msubad_h/ads_h: multiply two halfwords left justified and sub from the
first one word and add the second one word
/ and saturate each resulting word independetly.
* gen_msubadm_h/adms_h: multiply two halfwords in q-format left justified
and sub from the first one word and add to
the second one word / and saturate each resulting
word independetly.
* gen_msubadr32_h/32s_h: multiply two halfwords in q-format left justified
and sub from the first one word and add to
the second one word, round both results / and
saturate each resulting word independetly.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Add helpers:
* msub64_q_ssov: multiply two 32 bit q-format number, sub the result from a
64 bit q-format number and saturate.
* msub32_q_sub_ssov: sub two 64 bit q-format numbers and return a 32 bit
result.
* msubr_q_ssov: multiply two 32 bit q-format numbers, sub the result from a 32 bit
q-format number and saturate.
* msubr_q: multiply two 32 bit q-format numbers and sub the result from a 32 bit
q-format number.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Add helpers:
* sub64_ssov: subs two 64 bit values and saturates the result.
* subr_h/_ssov: subs two halfwords from two words in q-format with rounding
/ and saturates each result independetly.
Add microcode generator:
* gen_sub64_d: adds two 64 bit values.
* gen_msub_h/s_h: multiply four halfwords, sub each result left justfied
from two word values / and saturate each result.
* gen_msubm_h/s_h: multiply four halfwords, sub each result left justfied
from two words values in q-format / and saturate each
result.
* gen_msubr32/64_h/s_h: multiply four halfwords, sub each result left
justfied from two halftwords/words values in q-format
/ and saturate each result.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=DZVy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20150316' into staging
migration/next for 20150316
# gpg: Signature made Mon Mar 16 13:36:37 2015 GMT using RSA key ID 5872D723
# gpg: Can't check signature: public key not found
* remotes/juanquintela/tags/migration/20150316:
pc: Disable vmdesc submission for old machines
migration: Allow to suppress vmdesc submission
migration: Read JSON VM description on incoming migration
rename save_block_hdr to save_page_header
save_block_hdr: we can recalculate the cont parameter here
save_xbzrle_page: change calling convention
ram_save_page: change calling covention
ram_find_and_save_block: change calling convention
ram: make all save_page functions take a uint64_t parameter
Add migrate_incoming
Add -incoming defer
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All four leaks are similar, so fix them in one patch.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We don't validate the existence of handle_output which may let a buggy
guest to trigger a SIGSEV easily. E.g:
1) write 10 to queue_sel to a virtio net device with only 1 queue
2) setup an arbitrary pfn
3) then notify queue 10
Fixing this by validating the existence of handle_output before.
Cc: qemu-stable@nongnu.org
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Don Koch <dkoch@verizon.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
* fix handling of execute-never bits in page table walks
* tell kernel to initialize KVM GIC in realize function
* fix handling of STM (user) with r15 in register list
* ignore low bit of PC in M-profile exception return
* fix linux-user get/set_tls syscalls on CPUs with TZ
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=uK1h
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20150316' into staging
target-arm queue:
* fix handling of execute-never bits in page table walks
* tell kernel to initialize KVM GIC in realize function
* fix handling of STM (user) with r15 in register list
* ignore low bit of PC in M-profile exception return
* fix linux-user get/set_tls syscalls on CPUs with TZ
# gpg: Signature made Mon Mar 16 12:39:04 2015 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20150316:
linux-user: Access correct register for get/set_tls syscalls on ARM TZ CPUs
target-arm: Ignore low bit of PC in M-profile exception return
target-arm: Fix handling of STM (user) with r15 in register list
hw/intc/arm_gic: Initialize the vgic in the realize function
target-arm: get_phys_addr_lpae: more xn control
target-arm: fix get_phys_addr_v6/SCTLR_AFE access check
target-arm: convert check_ap to ap_to_rw_prot
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Older PC machine types might by accident be backwards live migration compatible,
but with the new vmdesc self-describing blob in our live migration stream we
would break that compatibility.
Also users wouldn't expect massive behaviorial differences when updating to a
new version of QEMU while retaining their old machine type, especially not
potential breakage in tooling around live migration.
So disable vmdesc submission for old PC machine types.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We now always send a JSON blob describing the migration file format as part
of the migration stream. However, some tools built around QEMU have proven
to stumble over this.
This patch gives the user the chance to disable said self-describing part of
the migration stream. To disable vmdesc submission, just add
-machine suppress-vmdesc=on
to your QEMU command line.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
One of the really nice things about the VM description format is that it goes
over the wire when live migration is happening. Unfortunately QEMU today closes
any socket once it sees VM_EOF coming, so we never give the VMDESC the chance to
actually land on the wire.
This patch makes QEMU read the description as well. This way we ensure that
anything wire tapping us in between will get the chance to also interpret the
stream.
Along the way we also fix virt tests that assume that number_bytes_sent on the
sender side is equal to number_bytes_read which was true before the VMDESC
patches and is true again with this patch.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It has always been a page header, not a block header. Once there, the
flag argument was only passed to make a bit or with it, just do the or
on the caller.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add a parameter to pass the number of bytes written, and make it return
the number of pages written instead.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add a parameter to pass the number of bytes written, and make it return
the number of pages written instead.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add a parameter to pass the number of bytes written, and make it return
the number of pages written instead.
Signed-off-by: Juan Quintela <quintela@redhat.com>
It used to be an int, but then we can't pass directly the
bytes_transferred parameter, that would happen later in the series.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Add migrate_incoming/migrate-incoming to start an incoming
migration.
Once a qemu has been started with
-incoming defer
the migration can be started by issuing:
migrate_incoming uri
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
-incoming defer causes qemu to wait for an incoming migration
to be specified later. The monitor can be used to set migration
capabilities that may affect the incoming connection process.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
* remotes/kvaneesh/for-upstream:
virtio: Fix memory leaks reported by Coverity
virtfs-proxy: Fix possible overflow
fsdev/virtfs-proxy-helper: Fix improper use of negative value
hw/9pfs/virtio-9p-posix-acl: Fix out-of-bounds access
9pfs-proxy: tiny cleanups in proxy_pwritev and proxy_preadv
9pfs-local: simplify/optimize local_mapped_attr_path()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When support was added for TrustZone to ARM CPU emulation, we failed
to correctly update the support for the linux-user implementation of
the get/set_tls syscalls. This meant that accesses to the TPIDRURO
register via the syscalls were always using the non-secure copy of
the register even if native MRC/MCR accesses were using the secure
register. This inconsistency caused most binaries to segfault on startup
if the CPU type was explicitly set to one of the TZ-enabled ones like
cortex-a15. (The default "any" CPU doesn't have TZ enabled and so is
not affected.)
Use access_secure_reg() to determine whether we should be using
the secure or the nonsecure copy of TPIDRURO when emulating these
syscalls.
Signed-off-by: Mikhail Ilyin <m.ilin@samsung.com>
Message-id: 1426505198-2411-1-git-send-email-m.ilin@samsung.com
[PMM: rewrote commit message to more clearly explain the issue
and its consequences.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For the ARM M-profile cores, exception return pops various registers
including the PC from the stack. The architecture defines that if the
lowest bit in the new PC value is set (ie the PC is not halfword
aligned) then behaviour is UNPREDICTABLE. In practice hardware
implementations seem to simply ignore the low bit, and some buggy
RTOSes incorrectly rely on this. QEMU's behaviour was architecturally
permitted, but bringing QEMU into line with the hardware behaviour
allows more guest code to run. We log the situation as a guest error.
This was reported as LP:1428657.
Reported-by: Anders Esbensen <anders@lyes.dk>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The A32 encoding of LDM distinguishes LDM (user) from LDM (exception
return) based on whether r15 is in the register list. However for
STM (user) there is no equivalent distinction. We were incorrectly
treating "r15 in list" as indicating exception return for both LDM
and STM, with the result that an STM (user) involving r15 went into
an infinite loop. Fix this; note that the value stored for r15
in this case is the current PC regardless of our current mode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1426015125-5521-1-git-send-email-peter.maydell@linaro.org
This patch forces vgic initialization in the vgic realize function.
It uses a new group/attribute that allows such operation:
KVM_DEV_ARM_VGIC_GRP_CTRL/KVM_DEV_ARM_VGIC_CTRL_INIT
This earlier initialization allows, for example, to setup VFIO
signaling and irqfd after vgic initialization, on a reset notifier.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Message-id: 1426094226-8515-1-git-send-email-eric.auger@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch makes the following changes to the determination of
whether an address is executable, when translating addresses
using LPAE.
1. No longer assumes that PL0 can't execute when it can't read.
It can in AArch64, a difference from AArch32.
2. Use va_size == 64 to determine we're in AArch64, rather than
arm_feature(env, ARM_FEATURE_V8), which is insufficient.
3. Add additional XN determinants
- NS && is_secure && (SCR & SCR_SIF)
- WXN && (prot & PAGE_WRITE)
- AArch64: (prot_PL0 & PAGE_WRITE)
- AArch32: UWXN && (prot_PL0 & PAGE_WRITE)
- XN determination should also work in secure mode (untested)
- XN may even work in EL2 (currently impossible to test)
4. Cleans up the bloated PAGE_EXEC condition - by removing it.
The helper get_S1prot is introduced. It may even work in EL2,
when support for that comes, but, as the function name implies,
it only works for stage 1 translations.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 1426099139-14463-4-git-send-email-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce simple_ap_to_rw_prot(), which has the same behavior as
ap_to_rw_prot(), but takes the 2-bit simple AP[2:1] instead of
the 3-bit AP[2:0]. Use this in get_phys_addr_v6 when SCTLR_AFE
is set, as that bit indicates we should be using the simple AP
format.
It's unlikely this path is getting used. I don't see CR_AFE
getting used by Linux, so possibly not. If it had been, then
the check would have been wrong for all but AP[2:1] = 0b11.
Anyway, this should fix it up, in case it ever does get used.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1426099139-14463-3-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of mixing access permission checking with access permissions
to page protection flags translation, just do the translation, and
leave it to the caller to check the protection flags against the access
type. Also rename to ap_to_rw_prot to better describe the new behavior.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1426099139-14463-2-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- handle TOD clock during migration
- CPACF key wrap options
- limit amount of pci device code we build
- ensure big endian accesses for ccws
- various fixes and cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=wS11
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20150316' into staging
Final batch of s390x enhancements/fixes for 2.3:
- handle TOD clock during migration
- CPACF key wrap options
- limit amount of pci device code we build
- ensure big endian accesses for ccws
- various fixes and cleanups
# gpg: Signature made Mon Mar 16 10:01:44 2015 GMT using RSA key ID C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
* remotes/cohuck/tags/s390x-20150316:
s390x/config: Do not include full pci.mak
s390x/pci: fix length in sei_nt2 event
s390x/ipl: remove dead code
s390x/virtio-bus: Remove unused function s390_virtio_bus_console()
s390x: CPACF: Handle key wrap machine options
s390x/kvm: make use of generic vm attribute check
kvm: encapsulate HAS_DEVICE for vm attrs
virtio-ccw: assure BE accesses
s390x/kvm: Guest Migration TOD clock synchronization
s390x: Replace unchecked qdev_init() by qdev_init_nofail()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVA0PlAAoJEK0ScMxN0CebQcsIAJDr/1Vg0iRhxPaH5ZlsEq68
VemwuXJ4pu+W96wtUIZlV/Gy6lYfHxxNxveQcrsycYiIKOgjmsuVvf16yN4v81Y0
l6ue+mQPjl8UTD1ky3VCHBZzZr3TAju6jhbXEbXVBAT+gm+rJYXiOfWTJK2TVoNb
7FvITuQIatUN29zfT+fEINUUeCxnJbmauOvRjmWLwsj7WRC+TnYqj+RI3+dr85al
HLs5AkZou5hCL7BKW7EQXKYzXcMvP5f/aXD4ETebrSbdGldy/Rb6Bxe6d0V9yqtB
rQunvNu92jGiDgE3Da2VGZMkt7/KleiuqMHlJtS7RuVcRbgz+SZeu5a4AnQNfWA=
=oPMh
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/tcg-pull-20150313' into staging
Pool TCG data, and ALWAYS/NEVER fix
# gpg: Signature made Fri Mar 13 20:09:09 2015 GMT using RSA key ID 4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg: aka "Richard Henderson <rth@redhat.com>"
# gpg: aka "Richard Henderson <rth@twiddle.net>"
* remotes/rth/tags/tcg-pull-20150313:
tcg: Complete handling of ALWAYS and NEVER
tcg: Use tcg_malloc to allocate TCGLabel
tcg: Change generator-side labels to a pointer
tcg: Change translator-side labels to a pointer
tcg-ia64: Use tcg_malloc to allocate TCGLabelQemuLdst
tcg: Use tcg_malloc to allocate TCGLabelQemuLdst
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
pci.mak includes a lot of devices - and most of them do not make
sense on s390x, like USB controllers or audio cards. These devices
also show up when running "qemu-system-s390x -device help" and thus
could raise the hope for the users that they could use these kind
of devices with qemu-system-s390x. To avoid this confusion, we
should not include pci.mak and rather include the bare minimum
manually instead.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Frank Blaschka <blaschka@linux.vnet.ibm.com>
Message-Id: <1426169954-6062-1-git-send-email-thuth@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The sei_nt2 event must contain the length of the event.
Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Message-Id: <1426164834-38648-7-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
load_image_targphys already checks the max size and will return
an error code. So the follow-on check will never trigger.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Message-Id: <1426164834-38648-6-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
